Skip to main content

SISTEMAS FLEXIBLES MULTIROBOT PARA COBERTURA Y TRANSPORTE

PGC2018-098719-B-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprogram Subprograma Estatal de Generación de Conocimiento
Call Proyectos de I+D (Excelencia / Generación de Conocimiento)
Call year 2018
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A generalized sequential subpredictor for input delayed systems under time-varying delay mismatches

  • González Sorribes, Antonio|||0000-0003-2690-0472
[EN] For input delayed systems, the sequential subpredictor (SSP) control scheme has the advantage that arbitrarily large delays can be tolerated in the control loop by introducing more and more subpredictors. However, an exact delay compensation is not possible in the presence of time-varying delay mismatches, and larger delays cannot therefore be obtained by increasing the number of subpredictors. To alleviate this limitation and enhance robustness against time-varying delay uncertainties, a generalized sequential subpredictor (SSP) control scheme is proposed by introducing new observer parameters that can be designed via Linear Matrix Inequalities (LMI) and Cone-Complementarity Linearization (CCL) algorithm. Finally, the effectiveness of the proposed method is illustrated by a simulation example.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robust stability analysis of an energy-efficient control in a Networked Control System with application to Unmanned Ground Vehicles

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Salt Llobregat, Julián José|||0000-0002-9640-2658
  • Jacobs, Jelle
[EN] In this paper, the robust stability and disturbance rejection performance analysis of an energy-efficient control is addressed in the framework of Networked Control System (NCS). The control scheme under study integrates periodic event-triggered control, packet-based control, time-varying Kalman filter, dual-rate control and prediction techniques, whose design is aimed at reducing energy consumption and bandwidth usage. The robust stability against time-varying model uncertainties is analyzed by means of a sufficient condition based on Linear Matrix Inequalities (LMI). Finally, the effectiveness of the proposed approach is experimentally validated in a tracking control for an Unmanned Ground Vehicle (UGV), which is a battery-constrained mobile device with limited computation capacities., This research was funded in part by grant by projects PGC2018-098719-B-I00 (MCIU/AEI/FEDER, UE) , and RTI2018-096590-B-I00 (MCIU/AEI/FEDER, UE) , and by European Commission as part of Project H2020-SEC-2016-2017-Topic: SEC-20-BES-2016-Id: 740736-"C2 Advanced Multi-domain Environment and Live Observation Technologies" (CAMELOT) . Part WP5 supported by Tekever ASDS, Thales Research and Technology, Viasat Antenna Systems, Universitat Politecnica de Valencia, FundacAo da Faculdade de Ciencias da Universidade de Lisboa, Ministerio da Defensa Nacional-Marinha Por-tuguesa, Ministerio da AdministracAo Interna Guarda Nacional Republicana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Improved results on stability analysis of time-varying delay systems via delay partitioning method and Finsler&apos, s lemma

  • González Sorribes, Antonio|||0000-0003-2690-0472
[EN] This paper proposes novel conditions based on linear matrix inequalities (LMI) for stability analysis of arbitrarily-fast time-varying delays systems. The time-varying delay interval is divided into smaller pieces in order to obtain an equivalent switched model with multiple time-varying delays of smaller interval, which differently from other existing approaches, the maximum switching frequency is not required for stability analysis. Thus, by the use of augmented Lyapunov-Krasovskii functionals and the Finsler¿s lemma, together with some relationships among state variables intentionally defined, the inherent conservatism can be progressively reduced by refining more and more the delay partition. The superiority of the proposed method is illustrated through two benchmark examples, This work was supported by grant GV/2021/082 funded by Generalitat Valenciana, grant PID2020-116585GB-I00 funded by MCIN/AEI/10.13039/501100011033, and grant PGC2018-098719-B-I00 funded by MCIU/AEI/FEDER, UE.10.13039/501100011033, and grant PGC2018-098719-B-I00 funded by MCIU/AEI/FEDER, UE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Output-feedback anti-disturbance predictor-based control for discrete-time systems with time-varying input delays

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] This paper investigates the robust stabilization of discrete-time systems with time-varying input delays and model uncertainties by predictor-based anti-disturbance output-feedback control strategies. Here, a novel predictor-feedback control combined with an extended state observer is proposed. The objective is to counteract the negative effects of input delays while actively rejecting disturbance signals typically encountered in engineering practice, such as steps or harmonics. Differently from previous approaches, unknown but bounded time-varying delays are taken into consideration. Moreover, the complexity of the algorithm for control synthesis is notably reduced. Finally, an illustrative example from the literature is provided to show that better robust performance can be achieved with the proposed method., This work was partially supported by projects TIN201786520C31R, Ministerio de Economia y Competitividad (Spain) , and PGC2018098719BI00, MCIU/AEI/FEDER, UE, and Group DGA T4517R, Spain. The material in this paper was not presented at any conference. This paper was recommended for publication in revised form by Associate Editor Bin Zhou under the direction of Editor Ian R. Petersen.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Planificación de trayectorias en sistemas multirobot utilizando redes de Petri. Resultados y problemas abiertos, Path planning of multirobot systems using Petri net models. Results and open problems

  • Mahulea, C.
  • González, R.
  • Montijano, E.
  • Silva, M.
[EN] This paper presents a trajectory planning approach in multirobot systems based on Petri net models. This type of models is very useful for high-level specifications since, in this case, the classical planning methods (potential functions, RRT algorithms, RRT*) cannot be used being dicult to determine a priori the sequence of configurations for each robot. This work presents the formal definition of the Robot Motion Petri net t hat i s obtained from a partition of the environment in cells. Using the s tructure of the Petri net, in case of specifications defined as Boolean or Linear Temporal Logic (LTL) formulas, dierent optimization problems are presented that can be used to obtain trajectories for robots. The main advantage of models based on Petri nets is their scalability with respect to the number of robots. This makes it possible to reciently solve planning problems with a large number of robots. In the second part of the paper, some extensions and new results for distributed planning in unknown environments and with partial communications between robots are presented., [ES] Este trabajo presenta una estrategia de planificacón de trayectorias en equipos de robots moviles basada en el uso de modelos definidos con redes de Petri. Estos tipos de modelos son muy útiles para especificaciones de alto nivel ya que, en este caso, los métodos clásicos de planificación (funciones potenciales, algoritmos RRT, RRT*) no se pueden utilizar, siendo difícil determinar a priori la secuencia de configuraciones para cada robot. Este trabajo presenta la definición formal de la Red de Petri de Movimiento de Robots que se obtiene a partir de una partición del entorno en celdas. Utilizando la estructura de la red de Petri, en caso de especificaciones definidas como fórmulas Booleanas o fórmulas en lógica temporal lineal (LTL), se presentan diferentes problemas de optimización que se pueden utilizar para obtener trayectorias para los robots. La principal ventaja de los modelos basados en redes de Petri es su escalabilidad con respecto al número de robots. Ello permite resolver con eficiencia problemas de planificación de equipos con un número grande de robots. En la segunda parte del trabajo, se presentan algunas extensiones y resultados nuevos para la planificación distribuida en entornos desconocidos y con comunicaciones parciales entre los robots., Los resultados de esta línea de investigación son fruto de la participación de varios compañeros, investigadores de la Universidad de Zaragoza y de otras Universidades extranjeras. Queremos agradecer la participación de todos ellos, mencionando muy especialmente a Marius Kloetzer (profesor de la Universidad Técnica de Iasi, Rumanía). Este trabajo ha sido financiado parcialmente por los proyectos PGC2018-098719-B-I00 and PGC2018-098817-A-I00 (MCIU/AEI/FEDER, UE) y la ONR Global NICOP grant N62909-19-1-2027.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A weighted distributed predictor-feedback control synthesis for interconnected time delay systems

  • González Sorribes, Antonio|||0000-0003-2690-0472
[EN] The paper investigates the control design of interconnected time delay systems by means of distributed predictor-feedback delay compensation approaches and event-triggered mechanism. The idea behind delay compensation is to counteract the negative effects of delays in the control-loop by feeding back future predictions of the system state. Nevertheless, an exact prediction of the overall system state vector cannot be obtained providing that each system has only knowledge of their local data regarding the system model and state variables. Consequently, predictor-feedback delay compensation may lose effectiveness if the coupling between subsystems is sufficiently strong. To circumvent this drawback, the proposed distributed predictor-feedback control incorporates extra degree of freedom for control synthesis by introducing new weighting factors for each local prediction term. The design of the weighting factors is addressed, together with the event-triggered parameters, by an algorithm based on Linear Matrix Inequalities (LMI) and the Cone Complementarity Linearization (CCL). Simulation results are provided to show the achieved improvements and validate the effectiveness of the proposed method, even in the case that other control strategies fail to stabilize the closed-loop system., This work was supported by projects PGC2018-098719-B-I00 (MCIU/AEI/FEDER, UE), Group DGA T45-17R and Fundacion Universitaria Antonio Gargallo (Project 2018/B004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A novel descriptor redundancy method based on delay partition for exponential stability of time delay systems

  • González Sorribes, Antonio|||0000-0003-2690-0472
[EN] This paper investigates the exponential stability of uncertain time delay systems using a novel descriptor redundancy approach based on delay partitioning. First, the original system is casted into an equivalent descriptor singular state¿space representation by introducing redundant state variables so that the resulting delay is progressively reduced. From the equivalent model and applying Lyapunov Functional method, a sufficient condition based on Linear Matrix Inequalities (LMIs) for exponential stability with guaranteed decay rate performance is obtained. As a result, the inherent conservatism of Lyapunov¿Krasovskii functional techniques can arbitrarily be reduced by increasing the number of delay partition intervals including decay rate performance and model uncertainties in polytopic form. Various benchmark examples are provided to validate the effectiveness of the proposed method, showing better trade-off between conservatism and performance in comparison to previous approaches., This work was supported by project PGC2018-098719-B-I00 (MCIU/AEI/FEDER,UE).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

RGB-D Tracking and Optimal Perception of Deformable Objects

  • Cuiral-Zueco, I.
  • Lopez-Nicolas, G.
Addressing the perception problem of texture-less objects that undergo large deformations and movements, this article presents a novel RGB-D learning-free deformable object tracker in combination with a camera position optimisation system for optimal deformable object perception. The approach is based on the discretisation of the object''s visible area through the generation of a supervoxel graph that allows weighting new supervoxel candidates between object states over time. Once a deformation state of the object is determined, supervoxels of its associated graph serve as input for the camera position optimisation problem. Satisfactory results have been obtained in real time with a variety of objects that present different deformation characteristics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Predictor-feedback synthesis in coordinate-free formation control under time-varying delays

  • González, Antonio
  • Aragüés, Rosario
  • López-Nicolás, Gonzalo
  • Sagüés, Carlos
This paper investigates new coordinate-free formation control strategies of multi-agent systems to overcome the negative effects of time delays. To this end, we present a single predictor-feedback scheme to compensate the multiple communication delays, assumed to be unknown but bounded and arbitrarily-fast time-varying. Although delays cannot exactly be compensated due to time-varying delay mismatches, the trade-off between robustness and convergence speed can be notably improved if the control gain is suitably designed. Hence, with the objective of enlarging the time-varying delay interval for a given convergence speed, an LMI-based iterative algorithm is presented to solve the control gain synthesis.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Distributed relative localization using the multi-dimensional weighted centroid

  • Aragüés, Rosario
  • González, Antonio
  • López-Nicolás, Gonzalo
  • Sagüés, Carlos
A key problem in multi-agent systems is the distributed estimation of the localization of agents in a common reference from relative measurements. Estimations can be referred to an anchor node or, as we do here, referred to the weighted centroid of the multi-agent system. We propose a Jacobi Over—Relaxation method for distributed estimation of the weighted centroid of the multi-agent system from noisy relative measurements. Contrary to previous approaches, we consider relative multidimensional measurements with general covariance matrices not necessarily diagonal. We prove our weighted centroid method converges faster than anchor-based solutions. We also analyze the method convergence and provide mathematical constraints that ensure avoiding ringing phenomena.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Weighted predictor-feedback formation control in local frames under time-varying delays and switching topology

  • Gonzalez, Antonio
  • Aragüés, Rosario
  • López-Nicolás, Gonzalo
  • Sagüés, Carlos
This article presents a novel control strategy based on predictor-feedback delay compensation for multiagent systems to reach a prescribed target formation under unknown but bounded communication delays and switching communication topology. Both communication delays and network topology can be subjected to arbitrarily-fast time variations. The key idea is to implement predictor-feedback strategies using only relative measurements between agents expressed in each local agent's frame, with the aim to counteract the negative effect of time delays. Nevertheless, due to the decentralized nature of the control, the presence of time-varying delays and switching communication topology, only partial delay compensation is possible. Despite this, we show that better performance can be achieved with our proposal with respect to nonpredictor control schemes by introducing a weighting factor for predictor-feedback terms in the control law. Sufficient conditions based on Linear Matrix Inequalities for robust stability are also provided, which allow to easily design the controller parameters in order to maximize the speed of convergence. Finally, simulation results are provided to show the effectiveness of the proposed approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A Real-Time Game Theoretic Planner for Autonomous Two-Player Drone Racing

  • Spica, R.
  • Cristofalo, E.
  • Wang, Z.J.
  • Montijano, E.
  • Schwager, M.
In this article, we propose an online 3-D planning algorithm for a drone to race competitively against a single adversary drone. The algorithm computes an approximation of the Nash equilibrium in the joint space of trajectories of the two drones at each time step, and proceeds in a receding horizon fashion. The algorithm uses a novel sensitivity term, within an iterative best response computational scheme, to approximate the amount by which the adversary will yield to the ego drone to avoid a collision. This leads to racing trajectories that are more competitive than without the sensitivity term. We prove that the fixed point of this sensitivity enhanced iterative best response satisfies the first-order optimality conditions of a Nash equilibrium. We present results of a simulation study of races with 2-D and 3-D race courses, showing that our game theoretic planner significantly outperforms amodel predictive control (MPC) racing algorithm. We also present results of multiple drone racing experiments on a 3-D track in which drones sense each others'' relative position with onboard vision. The proposed game theoretic planner again outperforms the MPC opponent in these experiments where drones reach speeds up to 1.25m/s.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Model-free sliding-mode controller for soft landing of reluctance actuators

  • Moya-Lasheras, Eduardo
  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
Some electromagnetic actuators suffer from high velocity impacts during non-controlled switching operations, which cause contact bouncing, mechanical wear, and acoustic noise. Soft-landing control strategies aim at minimizing the impact velocities of these devices to improve their performance. This paper presents a sliding-mode controller for soft landing of single-coil reluctance actuators. It is a switching model-free controller, which results in a very simple implementation. A generalized dynamical hybrid model of an actuator is utilized for deriving the robustness condition, based on the Lyapunov theory. Then, the condition is evaluated for a dynamical model, based on a commercial device, and several reference trajectories. Finally, the controller performance is validated through simulations. The effect of the sampling rate on the resulting impact velocities is also analyzed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Rauch-Tung-Striebel Smoother for Position Estimation of Short-Stroke Reluctance Actuators

  • Moya-Lasheras, Eduardo
  • Schellekens, Jan M.
  • Sagues, Carlos
This article presents a novel state estimator for short-stroke reluctance actuators, intended for soft-landing control applications in which the position cannot be measured in real time. One of the most important contributions regards the system modeling for the estimator. The discrete state of the hybrid system is treated as an input. Moreover, the model is simplified to facilitate the identification of parameters and the implementation of the estimator. Thus, auxiliary variables are added to the state vector in order to indirectly account for modeling errors. Another important contribution is the state estimation approach. It is based on the Rauch–Tung–Striebel fixed-interval smoother, which allows refining past data from later observations. Numerous simulations are performed to analyze and compare the proposal and several alternatives. In addition, experimental testing is presented to evaluate and validate the estimator. As the simulated and experimental analyses demonstrate, the combined effect of the novel additions results in significantly smaller estimation errors of position and velocity.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An efficient dynamical model of reluctance actuators with flux fringing and magnetic hysteresis

  • Moya Lasheras, Eduardo
  • Sagues, Carlos
  • Llorente, Sergio
This paper presents an efficient and accurate dynamical model of reluctance actuators, suitable for prediction and control applications. It is a hybrid lumped-parameter state-space model that takes into account the mechanical and electromagnetic dynamics, including eddy currents, flux fringing, magnetic hysteresis and saturation. Special emphasis is placed on the hysteresis model, which is based on the Jiles–Atherton theory. The novel parts of the model – the gap reluctance expression and the modified Jiles–Atherton hysteresis model – are identified, showing that the simulated results fit very well the experimental data. Furthermore, its potential application for control is exemplified with a feedback strategy, in which the design of the controller and observer are based on the proposed dynamical model.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

REDCHO: Robust Exact Dynamic Consensus of High Order

  • Aldana-López, R.
  • Aragüés, R.
  • Sagüés, C.
This article addresses the problem of average consensus in a multi-agent system when the desired consensus quantity is a time varying signal. Recently, the EDCHO protocol leveraged high order sliding modes to achieve exact consensus under a constrained set of initial conditions, limiting its applicability to static networks. In this work, we propose REDCHO, an extension of the previous protocol which is robust to mismatch in the initial conditions, making it suitable to use cases in which connection and disconnection of agents is possible. The convergence properties of the protocol are formally explored. Finally, the effectiveness and advantages of our proposal are shown with concrete simulation examples showing the benefits of REDCHO against other methods in the literature.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Adaptive deformation control for elastic linear objects

  • Aghajanzadeh, O.
  • Aranda, M.
  • Corrales Ramon, J.A.
  • Cariou, C.
  • Lenain, R.
  • Mezouar, Y.
This paper addresses the general problem of deformable linear object manipulation. The main application we consider is in the field of agriculture, for plant grasping, but may have interests in other tasks such as human daily activities and industrial production. We specifically consider an elastic linear object where one of its endpoints is fixed, and another point can be grasped by a robotic arm. To deal with the mentioned problem, we propose a model-free method to control the state of an arbitrary point that can be at any place along the object’s length. Our approach allows the robot to manipulate the object without knowing any model parameters or offline information of the object’s deformation. An adaptive control strategy is proposed for regulating the state of any point automatically deforming the object into the desired location. A control law is developed to regulate the object’s shape thanks to the adaptive estimation of the system parameters and its states. This method can track a desired manipulation trajectory to reach the target point, which leads to a smooth deformation without drastic changes. A Lyapunov-based argument is presented for the asymptotic convergence of the system that shows the process’s stability and convergence to desired state values. To validate the controller, numerical simulations involving two different deformation models are conducted, and performances of the proposed algorithm are investigated through full-scale experiments. Copyright © 2022 Aghajanzadeh, Aranda, Corrales Ramon, Cariou, Lenain and Mezouar.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Design of a perfect-tracking soft-landing controller for electromagnetic switching devices

  • Ramirez-Laboreo, Edgar
  • Moya-Lasheras, Eduardo
  • Sagues, Carlos
Electromagnetic switching devices such as electromechanical relays and solenoid valves suffer from impacts and mechanical wear when they are activated using a constant-voltage policy. This paper presents a new control approach that aims at achieving soft landing in these devices, i.e., a movement without neither impacts nor bouncing. The hybrid nonlinear dynamics of the system is firstly described taking into account the limited range of motion that characterizes this class of devices. Then, the nonlinear expression of the control law is derived and a method to design a soft-landing reference trajectory is proposed. It is shown that, when certain conditions are met, the design methodology presented in the paper results in a controller that achieves perfect tracking of the reference trajectory and, hence, soft landing is accomplished. The theoretical analysis is validated by simulation using a dynamical model of a specific switching device.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An audio-based iterative controller for soft landing of electromechanical relays

  • Serrano-Seco, Eloy
  • Ramírez-Laboreo, Edgar
  • Moya-Lasheras, Eduardo
  • Sagues, Carlos
Electromechanical relays and contactors suffer from strong collisions at the end of the switching operations. This causes several undesirable phenomena, such as clicking, mechanical wear and contact bounce. Thus, there is great interest in mitigating these switching impacts while keeping the advantageous features of these devices. This paper proposes a complete control strategy for soft landing. The control structure includes three main components. The first one is a real-time flux-tracking feedback controller, which presents several advantages over voltage or current control. The second one is a feedforward controller, which computes the flux reference signal based on a proposed dynamical model and the desired position trajectory for the switching operations. Lastly, the third control component is a learning-type run-to-run adaptation law that iteratively adapts the model parameters based on an audio signal. It exploits the repetitive nature of these devices in order to circumvent modeling discrepancies due to unit-to-unit variability or small changes between operations. The effectiveness of the proposed control is demonstrated through various experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Equitable persistent coverage of non-convex environments with graph-based planning

  • Palacios-Gasós, J.M.
  • Tardioli, D.
  • Montijano, E.
  • Sagüés, C.
In this article, we tackle the problem of persistently covering a complex non-convex environment with a team of robots. We consider scenarios where the coverage quality of the environment deteriorates with time, requiring every point to be constantly revisited. As a first step, our solution finds a partition of the environment where the amount of work for each robot, weighted by the importance of each point, is equal. This is achieved using a power diagram and finding an equitable partition through a provably correct distributed control law on the power weights. Compared with other existing partitioning methods, our solution considers a continuous environment formulation with non-convex obstacles. In the second step, each robot computes a graph that gathers sweep-like paths and covers its entire partition. At each planning time, the coverage error at the graph vertices is assigned as weights of the corresponding edges. Then, our solution is capable of efficiently finding the optimal open coverage path through the graph with respect to the coverage error per distance traversed. Simulation and experimental results are presented to support our proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Coverage of deformable contour shapes with minimal multi-camera system

  • Herguedas, R.
  • López-Nicolás, G.
  • Sagüés, C.
Perception over time is a critical problem in those cases where deformable objects are manipulated. The goal of this study is to cover the contour of an object along a deformation process and according to a prescribed coverage objective, in terms of visibility and resolution. This task is carried out by a set of limited field-of-view cameras. We propose novel methods for guaranteeing feasibility of the coverage objectives, which include the computation of the maximum visibility and resolution of the contour. Then, we introduce the coverage objectives in an offline constrained optimization problem to compute a priori the minimum number of cameras that achieve the coverage requirements. Finally, we propose an online technique that provides optimized configurations faster than the offline one, even when the object’s reference deformation is unknown. We report experimental results in which our method achieves 100% of the coverage in simulation and in a real task.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Survey on multi-robot manipulation of deformable objects

  • Herguedas, R.
  • López-Nicolás, G.
  • Aragüés, R.
  • Sagüés, C.
Autonomous manipulation of deformable objects is a research topic of increasing interest due to the variety of current processes and applications that include this type of tasks. It is a complex problem that involves aspects such as modeling, control, perception, planning, grasping, estimation, etc. A single robot may be unable to perform the manipulation when the deformable object is too big, too heavy or difficult to grasp. Then, using multiple robots working together naturally arises as a solution to perform coordinately the manipulation task. In this paper, we contribute a survey of relevant state-of-the-art approaches concerning manipulation of deformable objects by multiple robots, which includes a specific classification with different criteria and a subsequent analysis of the leading methods, the main challenges and the future research directions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Intermittent connectivity maintenance with heterogeneous robots

  • Aragüés Muñoz, Rosario
  • Dimarogonas, Dimos V.
  • Guallar, Pablo
  • Sagüés Blázquiz, Carlos
In this article, we consider a scenario of cooperative task servicing, with a team of heterogeneous robots with different maximum speeds and communication radii, in charge of keeping the network intermittently connected. We abstract the task locations into a one-dimensional cycle graph that is traversed by the communicating robots, and we discuss intermittent communication strategies so that each task location is periodically visited, with a worst-case revisiting time. Robots move forward and backward along the cycle graph, exchanging data with their previous and next neighbors when they meet, and updating their region boundaries. Asymptotically, each robot is in charge of a region of the cycle graph, depending on its capabilities. The method is distributed, and robots only exchange data when they meet.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Contribución de congreso (ConferenceOutput)

Multirobot control with double-integrator dynamics and control barrier functions for deformable object transport

  • Herguedas, Rafael
  • Aranda, Miguel
  • Lopez-Nicolas, Gonzalo
  • Sagües, Carlos
  • Mezouar, Youcef
In this paper, we propose a formation control system for deforming and transporting simultaneously a de-formable object with a team of robots, modeled with double-integrator dynamics. The goal is to reach a target configuration, defined as a combination of shape, scale, orientation and position of the formation. We augment this controller with a set of control barrier functions (CBFs). The CBFs allow us to satisfy fundamental constraints for the success of the task: avoidance of agent-to-agent, agent-to-obstacle and object-to-obstacle collisions, and of excessive stretching. We test the performance of our proposal in different simulation scenarios.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Multirobot Transport of Deformable Objects With Collision Avoidance

  • Herguedas, Rafael
  • Lopez-Nicolas, Gonzalo
  • Sagüés, Carlos
In the problem of autonomous transport of deformable objects, we propose a multirobot approach for steering a large object to a target configuration (object dimensions, orientation, and position). Firstly, we present a deformation model based on the evolution over time of the dimensions and rotation of the object's bounding box (BB). We consider the object is grasped by a set of mobile robots with double-integrator dynamics. Then, we propose a set of nominal controllers that allows reaching a desired configuration of the BB that models the deformable object. In order to prevent collisions of the object with static or dynamic obstacles, we formulate a control barrier function (CBF) that exploits our deformation model. Finally, we integrate the nominal controllers and the CBF into a quadratic-programming controller, which includes overstretching avoidance and velocity constraints. We report simulation results to show the performance of this approach in different test scenarios.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Multi-scale Laplacian-based FMM for shape control

  • Cuiral Zueco, Ignacio
  • López-Nicolás, Gonzalo
Shape control has become a prominent research field as it enables the automation of tasks in many applications. Overall, deforming an object to a desired target shape by using few grippers is a major challenge. The limited information about the object dynamics, the need to combine small and large deformations in order to achieve certain target shapes and the non-linear nature of most deformable objects are factors that significantly hamper shape control performance. In this paper, we propose a shape control method for multi-robot manipulation of large-strain deformable objects. Our approach is based on multi-scale Laplacian descriptors that feed an FMM (Fast Marching Method) for elastic shape contour matching. The FMM's resulting path and the Laplacian operator are used to define a control strategy for the robot grippers. Simulation experiments carried out with an ARAP (As Rigid As Possible) deformation model provide satisfactory results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Path planning of multirobot systems using Petri net models. Results and open problems

  • Mahulea, C
  • Gonzalez, R
  • Montijano, E
  • Silva, M
This paper presents a trajectory planning approach in multirobot systems based on Petri net models. This type of models is very useful for high-level specifications since, in this case, the classical planning methods (potential functions, RRT algorithms, RRT*) cannot be used being difficult to determine a priori the sequence of configurations for each robot. This work presents the formal definition of the Robot Motion Petri net that is obtained from a partition of the environment in cells. Using the structure of the Petri net, in case of specifications defined as Boolean or Linear Temporal Logic (LTL) formulas, different optimization problems are presented that can be used to obtain trajectories for robots. The main advantage of models based on Petri nets is their scalability with respect to the number of robots. This makes it possible to efficiently solve planning problems with a large number of robots. In the second part of the paper, some extensions and new results for distributed planning in unknown environments and with partial communications between robots are presented.ntial functions, RRT algorithms, RRT*) cannot be used being difficult to determine a priori the sequence of configurations for each robot. This work presents the formal definition of the Robot Motion Petri net that is obtained from a partition of the environment in cells. Using the structure of the Petri net, in case of specifications defined as Boolean or Linear Temporal Logic (LTL) formulas, different optimization problems are presented that can be used to obtain trajectories for robots. The main advantage of models based on Petri nets is their scalability with respect to the number of robots. This makes it possible to efficiently solve planning problems with a large number of robots. In the second part of the paper, some extensions and new results for distributed planning in unknown environments and with partial communications between robots are presented.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A distributed robot swarm control for dynamic region coverage

  • Teruel, Enrique
  • Aragüés, Rosario
  • López-Nicolás, Gonzalo
We propose a new distributed method for coverage of a moving deformable convex region with a team of robots in a communication network. Robots execute a distributed self-deployment strategy based on Centroidal Voronoi Tessellations (CVT) to cover the region evenly while preventing collisions. The main contribution is the addition of a feedforward action to overcome the well-known slow convergence issue of the basic CVT algorithms. This action is derived by each robot from the information about the region that floods through the network from a few selected leaders. The method allows to quickly adapt to the fastly changing working area in spite of the light communication requirements, and it is well suited for large teams of expendable robots.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A Practical Method to Cover Evenly a Dynamic Region with a Swarm

  • Teruel, E.
  • Aragues, R.
  • López-Nicolás, G.
Many applications require exploring or monitoring a region. This can be achieved by a sensor network, a large team of robots which can cover only a very small fraction each. When the region is convex, small, and static, it suffices to deploy the robots as a Centroidal Voronoi Tessellation (CVT). Instead, we consider that the area to cover is wide, not necessarily convex, and complex. Then, a smaller simple region is maneuvered and deformed to rake the full area. A few waypoints describing the region along time are provided to the robots. The goal is that the robots coordinate to dynamically deploy over this region evenly, near a CVT. Unfortunately, the distributed CVT computation algorithm converges too slowly for such exploration method to be practical. In this work, CVT computation is complemented with feedback and feedforward based control techniques, and dynamic consensus, to adjust the robot speeds so that they coordinate to cover the dynamic region. We demonstrate in simulation that the proposed method succeeds to achieve the goal of tracking the region, with the robots evenly deployed, while keeping the connectivity and avoiding collisions. We also compare the performance of the proposed method versus other alternatives.