Skip to main content

SISTEMAS INFORMATICOS PREDECIBLES Y CONFIABLES PARA LA INDUSTRIA 4.0

TIN2017-86520-C3-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Hardware resources contention-aware scheduling of hard real-time multiprocessor systems

  • Aceituno-Peinado, José María
  • Guasque Ortega, Ana|||0000-0002-2900-8466
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] In hard real-time embedded systems, switching to multicores is a step that most application domains delay asmuch as possible. This is mainly due to the number of sources of indeterminism, which mainly involve sharedhardware resources, such as buses, caches, and memories. In this paper, a new task model that considersthe interference that task execution causes in other tasks running on other cores due to memory contentionis proposed. We propose a scheduling algorithm that calculates the exact interference. We also analyse andcompare existing partitioning algorithms and propose three strategies to allocate tasks to cores to schedule asmany tasks as possible and minimise total interference., This work was supported by the Spanish Science and Innovation Ministry (predictable and dependable computer systems for Industry 4.0) under Grant MICINN: CICYT project PRECON-I4 and Grant TIN2017-86520-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

The Role of Mixed Criticality Technology in Industry 4.0

  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Guasque Ortega, Ana|||0000-0002-2900-8466
[EN] Embedded systems used in critical systems, such as aeronautics, have undergone continuous evolution in recent years. In this evolution, many of the functionalities offered by these systems have been adapted through the introduction of network services that achieve high levels of interconnectivity. The high availability of access to communications networks has enabled the development of new applications that introduce control functions with higher levels of intelligence and adaptation. In these applications, it is necessary to manage different components of an application according to their levels of criticality. The concept of "Industry 4.0" has recently emerged to describe high levels of automation and flexibility in production. The digitization and extensive use of information technologies has become the key to industrial systems. Due to their growing importance and social impact, industrial systems have become part of the systems that are considered critical. This evolution of industrial systems forces the appearance of new technical requirements for software architectures that enable the consolidation of multiple applications in common hardware platforms-including those of different criticality levels. These enabling technologies, together with use of reference models and standardization facilitate the effective transition to this approach. This article analyses the structure of Industry 4.0 systems providing a comprehensive review of existing techniques. The levels and mechanisms of interaction between components are analyzed while considering the impact that the handling of multiple levels of criticality has on the architecture itself-and on the functionalities of the support middleware. Finally, this paper outcomes some of the challenges from a technological and research point of view that the authors identify as crucial for the successful development of these technologies., This research was funded by the Spanish Science and Innovation Ministry MICINN: CICYT project PRECON-I4: "Predictable and dependable computer systems for Industry 4.0" TIN201786520-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A novel observer-predictor control for uncertain systems with unknown time-varying input and output delays

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] In this paper, a novel observer-predictor control is proposed to stabilise uncertain systems subject to unknown but bounded arbitrarily-fast time-varying input and output delays. Due to the presence of time-varying model uncertainties and delay mismatches, the separation principle cannot be used to design the observer and control gains separately, which becomes a challenging problem. By applying small gain theory and Lyapunov-Krasovskii functionals (LKF), in combination with Bessel-Legendre inequalities and the Projection Lemma, we develop sufficient conditions based on Linear Matrix Inequalities (LMIs) for control design. As a result, the closed-loop robust performance can be improved whilst satisfying a prescribed decay rate in the closed-loop dynamics at the expense of introducing more LMI decision variables without increasing the complexity of the control scheme. Also, the Extended State Observer (ESO) is integrated in the proposed control scheme to improve the rejection performance of mismatched disturbances. The effectiveness of the proposed method is illustrated by simulation results., This work was supported by Spanish Ministry of Economy, Industry, and Competition [TIN2017-86520-C3-1-R] and Fundacion Universitaria Antonio Gargallo [2018/B004].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Arquitectura distribuida modular para el control inteligente del tráfico, Modular distributed architecture for intelligent traffc control

  • Uribe-Chavert, Pedro
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Balbastre, Patricia|||0000-0001-9458-4083
  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
[EN] The management of people and vehicles mobility is an aspect of continuous study due to its contribution to pollution. Traffic light control determines the queues that can form at crossroads. Usually, this control is not adapted to the existing traffi at a specific time since the adaptation implies knowing the pedestrians and vehicles circulating at all times. This article proposes using modular intelligent devices that allow vehicles to be detected and access times to the intersection to be changed depending on the circumstances. A simulation has been carried out generating loads in MatLab and simulating the control with Simulink. A traffic light cycle with fixed times has been simulated and compared with cycles with varying service times depending on a load of pedestrians and vehicles. In the article, the Op and Sat indicators are proposed to measure the optimisation of the control algorithm on the crossing state. Using these indicators, it has been shown that it is possible to optimise the waiting time by 50%, almost independently of the traffic load in the best case., [ES] La gestión de la movilidad de personas y vehículos es un aspecto de continuo estudio debido a la relevancia que tiene en la contribución a la polución. El control de los semáforos determina las colas que en los cruces se pueden formar. Habitualmente este control no está adaptado al tráfico existente en un momento concreto, dado que la adaptación implica conocer los peatones y vehículos que se encuentran circulando en cada momento. Para resolver este problema, en el artículo se propone el uso de unos dispositivos inteligentes modulares que permiten detectar los vehículos y cambiar los tiempos de acceso al cruce dependiendo de las circunstancias. Para validar el sistema se ha realizado una simulación generando cargas en MatLab y simulando el control con Simulink. Se ha simulado un ciclo de semáforo con tiempos fijos y se ha comparado con ciclos de tiempos variables en función de la carga de peatones y de vehículos. En el artículo se proponen los indicadores Op y Sat como método de medición de la optimización del algoritmo de control sobre el estado del cruce. Por medio de dichos indicadores se ha comprobado que en el mejor de los casos es posible optimizar en un 50 % el tiempo de espera de forma casi independiente de la carga de tráfico., Ministerio de Ciencia e Innovación de España Proyecto MICINN: CICYT PRECON-I4: Sistemas informáticos predecibles y confiables para la Industria 4.0 TIN2017-86520-C3-1-R
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Use of Receiver Operating Characteristic curve to evaluate a street lighting control system

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Conejero, J. Alberto|||0000-0003-3681-7533
  • Cano, Juan-Carlos|||0000-0002-0038-0539
  • Sáenz-Peñafiel, Juan-José
[EN] Intelligent control of public lighting is nowadays one of the most challenging issues in smart city deployment. Lighting optimization entails a compromise between comfort, safety, and power consumption, affecting both vehicles and pedestrians. Smart solutions must estimate their characteristics to trade-off users' needs and energy requirements. This paper proposes an intelligent street lighting control system and the Receiver Operating Characteristic (ROC) curve method to evaluate the best number of street lamps to achieve a balance between public road user comfort and system power consumption. The control system is based on the detection of users, mainly pedestrians, using presence sensors. From the detection of a pedestrian by two or more consecutive street lamps it is possible to determine their speed. Knowing the pedestrian speed, allows the system to anticipate and adjust the light intensity of the remaining street lamps, and provide a comfortable view of the street. Using the ROC curve, we evaluate the control algorithm in terms of the number of previous street lamps used. We have tested the system and the method in a model of pedestrians walking down a street. The obtained results show that ROC analysis used to control street lighting allows measuring the whole control system's efficiency by providing a concrete number of previous street lamps., This work was supported in part by the Spanish Science and Innovation Ministry (MICINN): Interministerial Commission on Science and Technology (CICYT) project Predictable and dependable computer systems for Industry 4.0 (PRECON-I4) with code TIN2017-86520-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Event-triggered predictor-based control with gain-scheduling and extended state observer for networked control systems

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • Cuenca, Ángel|||0000-0003-4466-2666
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Balaguer Garín, Vicente
[EN] This paper investigates the stabilization of Networked Control Systems (NCS) with mismatched disturbances through a novel Event-Triggered Control (ETC), composed of a predictor-feedback scheme and a gain-scheduled Extended State Observer (ESO). The key idea of the proposed control strategy is threefold: (i) to reduce resource usage in the NCS (bandwidth, energy) while maintaining a satisfactory control performance; (ii) to counteract the main negative effects of NCS: time-varying delays, packet dropouts, packet disorder, and (iii) to reject the steady-state error in the controlled output due to mismatched disturbances. Moreover, we address the co-design of the controller/observer gains, together with the event-triggered parameters, by means of Linear Matrix Inequalities (LMI) and Cone Complementarity Linearization (CCL) approaches. Finally, we illustrate the effectiveness of the proposed control synthesis by simulation and experimental results in a Unmanned Aerial Vehicle (UAV) based test-bed platform., This work was partially supported by projects DPI2015-69376-R (Gobierno de España/European Union), Project 2018/B004 (Fundación Universitaria Antonio Gargallo), TIN2014-56158-C4-4-P-AR (Ministerio de Economia y Competitividad, Spain), FPI-UPV 2017 PAID-01-17 (Universitat Politècnica de València) and European Commission as part of Project H2020-SEC-2016-2017, Topic: SEC-20-BES-2016-Id: 740736- C2 Advanced Multi-domain Environment and Live Observation Technologies .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Tesis doctoral (DoctoralThesis)

Investigación de nuevas metodologías para la planificación de sistemas de tiempo real multinúcleo mediante técnicas no convencionales

  • Aceituno Peinado, José María
[ES] Los sistemas de tiempo real se caracterizan por exigir el cumplimento de unos requisitos temporales que garanticen el funcionamiento aceptable de un sistema. Especialmente, en los sistemas de tiempo real estricto estos requisitos temporales deben ser inviolables. Estos sistemas suelen aplicarse en áreas como la aviación, la seguridad ferroviaria, satélites y control de procesos, entre otros. Por tanto, el incumplimiento de un requisito temporal en un sistema de tiempo real estricto puede ocasionar un fallo catastrófico. La planificación de sistemas de tiempo real es una área en la que se estudian y aplican diversas metodologías, heurísticas y algoritmos que intentan asignar el recurso de la CPU sin pérdidas de plazo. El uso de sistemas de computación multinúcleo es una opción cada vez más recurrente en los sistemas de tiempo real estrictos. Esto se debe, entre otras causas, a su alto rendimiento a nivel de computación gracias a su capacidad de ejecutar varios procesos en paralelo. Por otro lado, los sistemas multinúcleo presentan un nuevo problema, la contención que ocurre debido a la compartición de los recursos de hardware. El origen de esta contención es la interferencia que en ocasiones ocurre entre tareas asignadas en distintos núcleos que pretenden acceder al mismo recurso compartido simultáneamente, típicamente acceso a memoria compartida. Esta interferencia añadida puede suponer un incumplimiento de los requisitos temporales, y por tanto, la planificación no sería viable. En este trabajo se proponen nuevas metodologías y estrategias de planificación no convencionales para aportar soluciones al problema de la interferencia en sistemas multinúcleo. Estas metodologías y estrategias abarcan algoritmos de planificación, algoritmos de asignación de tareas a núcleos, modelos temporales y análisis de planificabilidad. El resultado del trabajo realizado se ha publicado en diversos artículos en revistas del área. En ellos se presentan estas nuevas propuestas que afrontan los retos de la planificación de tareas. En la mayoría de los artículos presentados la estructura es similar: se introduce el contexto en el que nos situamos, se plantea la problemática existente, se expone una propuesta para solventar o mejorar los resultados de la planificación, después se realiza una experimentación para evaluar de forma práctica la metodología propuesta, se analizan los resultados obtenidos y finalmente se exponen unas conclusiones sobre la propuesta. Los resultados de las metodologías no convencionales propuestas en los artículos que conforman esta tesis muestran una mejora del rendimiento de las planificaciones en comparación con algoritmos clásicos del área. Especialmente la mejora se produce en términos de disminución de la interferencia producida y mejora de la tasa de planificabilidad., [CA] Els sistemes de temps real es caracteritzen per exigir el compliment d'uns requisits temporals que garantisquen el funcionament acceptable d'un sistema. Especialment, en els sistemes de temps real estricte aquests requisits temporals han de ser inviolables. Aquests sistemes solen aplicar-se en àrees com l'aviació, la seguretat ferroviària, satèl·lits i control de processos, entre altres. Per tant, l'incompliment d'un requisit temporal en un sistema de temps real estricte pot ocasionar un error catastròfic. La planificació de sistemes de temps real és una àrea en la qual s'estudien i apliquen diverses metodologies, heurístiques i algorismes que intenten assignar el recurs de la CPU sense pèrdues de termini. L'ús de sistemes de computació multinucli és una opció cada vegada més recurrent en els sistemes de temps real estrictes. Això es deu, entre altres causes, al seu alt rendiment a nivell de computació gràcies a la seua capacitat d'executar diversos processos en paral·lel. D'altra banda, els sistemes multinucli presenten un nou problema, la contenció que ocorre a causa de la compartició dels recursos de hardware. L'origen d'aquesta contenció és la interferència que a vegades ocorre entre tasques assignades en diferents nuclis que pretenen accedir al mateix recurs compartit simultàniament, típicament accés a memòria compartida. Aquesta interferència afegida pot suposar un incompliment dels requisits temporals, i per tant, la planificació no seria viable. En aquest treball es proposen noves metodologies i estratègies de planificació no convencionals per aportar solucions al problema de la interferència en sistemes multinucli. Aquestes metodologies i estratègies comprenen algorismes de planificació, algorismes d'assignació de tasques a nuclis, models temporals i anàlisis de planificabilitat. El resultat del treball realitzat s'ha publicat en diversos articles en revistes de l'àrea. En ells es presenten aquestes noves propostes que afronten els reptes de la planificació de tasques. En la majoria dels articles presentats l'estructura és similar: s'introdueix el context en el qual ens situem, es planteja la problemàtica existent, s'exposa una proposta per a solucionar o millorar els resultats de la planificació, després es realitza una experimentació per a avaluar de manera pràctica la metodologia proposada, s'analitzen els resultats obtinguts i finalment s'exposen unes conclusions sobre la proposta. Els resultats de les metodologies no convencionals proposades en els articles que conformen aquesta tesi mostren una millora del rendiment de les planificacions en comparació amb algorismes clàssics de l'àrea. Especialment, la millora es produeix en termes de disminució de la interferència produïda i millora de la taxa de planificabilitat., [EN] Real-time systems are characterised by the demand for temporal constraints that guarantee acceptable operation and feasibility of a system. Especially, in hard real-time systems these temporal constraints must be respected. These systems are typically applied in areas such as aviation, railway safety, satellites and process control, among others. Therefore, a missed deadline in a hard-real time system can lead to a catastrophic failure. The scheduling of real-time systems is an area where various methodologies, heuristics and algorithms are studied and applied in an attempt to allocate the CPU resources without missing any deadline. The use of multicore computing systems is an increasingly recurrent option in hard real-time systems. This is due, among other reasons, to its high computational performance thanks to the ability to run multiple processes in parallel. On the other hand, multicore systems present a new problem, the contention that occurs due to the sharing of hardware resources. The source of this contention is the interference that sometimes happens between tasks allocated in different cores that try to access the same shared resource simultaneously, typically shared memory access. This added interference can lead to miss a deadline, and therefore, the scheduling would not be feasible. This paper proposes new non-conventional scheduling methodologies and strategies to provide solutions to the interference problem in multicore systems. These methodologies and strategies include scheduling algorithms, task allocation algorithms, temporal models and schedulability analysis. The results of this work have been published in several journal articles in the field. In these articles the new proposals are presented, they face the challenges of task scheduling. In the majority of these articles the structure is similar: the context is introduced, the existing problem is identified, a proposal to solve or improve the results of the scheduling is presented, then the proposed methodology is experimented in order to evaluate it in practical terms, the results obtained are analysed and finally conclusions about the proposal are expressed. The results of the non-conventional methodologies proposed in the articles that comprise this thesis show an improvement in the performance of the scheduling compared to classical algorithms in the area. In particular, the improvement is produced in terms of reducing the interference and a higher schedulability rate., Esta tesis se ha realizado en el marco de dos proyectos de investigación de carácter nacional. Uno de ellos es el proyecto es PRECON-I4. Consiste en la búsqueda de sistemas informáticos predecibles y confiables para la industria 4.0. El otro proyecto es PRESECREL, que consiste en la búsqueda de modelos y plataformas para sistemas informáticos industriales predecibles, seguros y confiables. Tanto PRECON-I4 como PRESECREL son proyectos coordinados financiados por el Ministerio de Ciencia, Innovación y Universidades y los fondos FEDER (AEI/FEDER, UE). En ambos proyectos participa la Universidad Politécnica de Valencia, la Universidad de Cantabria y la Universidad Politécnica de Madrid. Además, en PRESECREL también participa IKERLAN S. COOP I.P. Además, parte de los resultados de esta tesis también han servido para validar la asignación de recursos temporales en sistemas críticos en el marco del proyecto METROPOLIS (PLEC2021-007609).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robust Predictive Extended State Observer for a Class of Nonlinear Systems with Time-Varying Input Delay

  • Sanz Diaz, Ricardo
  • Fridman, Emilia
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
[EN] This paper deals with asymptotic stabilisation of a class of nonlinear input-delayed systems via dynamic output feedback in the presence of disturbances. The proposed strategy has the structure of an observer-based control law, in which the observer estimates and predicts both the plant state and the external disturbance. A nominal delay value is assumed to be known and stability conditions in terms of linear matrix inequalities are derived for fast-varying delay uncertainties. Asymptotic stability is achieved if the disturbance or the time delay is constant. The controller design problem is also addressed and a numerical example with an unstable system is provided to illustrate the usefulness of the proposed strategy., This work was partially supported by: Ministerio de Economía y Competitividad, Spain (TIN2017-86520-C3-1-R); Universitat Politècnica de València (FPI-UPV 2014 PhD Grant); and Israel Science Foundation (Grant No. 1128/14).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Observation and Stabilization of LTV Systems With Time-Varying Measurement Delay

  • Sanz Diaz, Ricardo
  • Krstic, Miroslav
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] This work deals with observer-based output-feedback stabilization of linear time-varying (LTV) systems with time-varying measurement delay. The delay is modeled by a first-order hyperbolic partial differential equation (PDE), whose boundary condition evolves according to an ordinary differential equation (ODE), namely, the plant. The overall system is thus represented by an ODE¿PDE cascade, which is also the structure of the proposed observer. The exponential stability of the estimation error is established for arbitrarily large time-varying delays. An observer-based controller is also introduced and the closed-loop stability is proved. The separation principle holds and the design of both the observer and controller gains can be done as if there was no delay. Some simulations illustrate the feasibility of this approach., This work was partially supported by Ministerio de Economía y Competitividad, Spain (TIN2017-86520-C3-1-R) and Universitat Politècnica de València, Spain (FPI-UPV 2014 Ph.D. Grant).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A hierarchical architecture for time- and event-triggered real-time systems

  • Real Sáez, Jorge Vicente|||0000-0001-7636-6672
  • Sáez Barona, Sergio|||0000-0001-8970-6808
  • Crespo, Alfons|||0000-0002-6606-7406
[EN] This paper proposes an architecture for combining the execution of time- and event-triggered real-time task sets. This makes it possible for the designer to choose the most appropriate mechanism depending on the role and nature of each task in the system. The proposed architecture allows one to choose the priority levels at which time- and event-triggered tasks are executed. This gives the designer an additional degree of freedom to make compromise decisions upon contradicting timing requirements, such as granting reduced jitter and at the same time providing prompt service to non-periodic events, for example. The proposed model is accompanied with a Ravenscar implementation of the time-triggered scheduler and a library of utilities for specifying time-triggered schedules and reusing time-triggered task patterns., This work has been partly supported by Spanish Government and FEDER funds (AEI/FEDER, UE) under grant (TIN2017-86520-C3-1-R) (PRECON-I4); and by European Commission project AQUAS (ECSEL-JU, Contract 737475).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Enhanced 2-DOF PID Controller Tuning Based on an Uncertainty and Disturbance Estimator With Experimental Validation

  • Balaguer Garín, Vicente
  • González Sorribes, Antonio|||0000-0003-2690-0472
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
[EN] In this paper a novel tuning procedure for Two-Degree-of-Freedom (2-DOF) PID controllers is proposed. The tuning methodology is based on an Uncertainty and Disturbance Estimator. As a result, an equivalent 2-DOF PID controller with simpler tuning rules is obtained. One advantage of the proposed method is that tracking performance and disturbance rejection can be accommodated separately in control synthesis. Moreover, the trade-off between disturbance rejection and robustness can easily be adjusted by tuning a single parameter without affecting the desired set-point tracking specifications. Numerical comparisons with well-known tuning methods are performed to illustrate the advantages of the proposed method. Finally, the effectiveness of the proposal is experimentally validated in an open-loop unstable plant consisting of a test-bed quadrotor platform., This work was supported by projects FPI-UPV PAID-01-17, Universitat Politecnica de Valencia (Spain), and TIN2017-86520-C3-1-R, Ministerio de Economia y Competitividad (Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Distributed Architecture to Integrate Sensor Information: Object Recognition for Smart Cities

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Simó Ten, José Enrique|||0000-0003-4677-7627
  • Blanes Noguera, Francisco|||0000-0002-9234-5377
[EN] Object recognition, which can be used in processes such as reconstruction of the environment map or the intelligent navigation of vehicles, is a necessary task in smart city environments. In this paper, we propose an architecture that integrates heterogeneously distributed information to recognize objects in intelligent environments. The architecture is based on the IoT/Industry 4.0 model to interconnect the devices, which are called smart resources. Smart resources can process local sensor data and offer information to other devices as a service. These other devices can be located in the same operating range (the edge), in the same intranet (the fog), or on the Internet (the cloud). Smart resources must have an intelligent layer in order to be able to process the information. A system with two smart resources equipped with different image sensors is implemented to validate the architecture. Our experiments show that the integration of information increases the certainty in the recognition of objects by 2-4%. Consequently, in intelligent environments, it seems appropriate to provide the devices with not only intelligence, but also capabilities to collaborate closely with other devices., This research was funded by the Spanish Science and Innovation Ministry grant number MICINN: CICYT project PRECON-I4: "Predictable and dependable computer systems for Industry 4.0" TIN2017-86520-C3-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Gain-Scheduled Predictive Extended State Observer for Time-varying Delays Systems with Mismatched Disturbances

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Cuenca, Ángel|||0000-0003-4466-2666
  • Balaguer Garín, Vicente
[EN] In this paper, a novel control scheme for systems with input and output time-varying delays is provided in discrete-time domain. The control strategy combines predictor-like techniques with a delay-dependent gain-scheduled extended state observer. The main goal is twofold: (i) to minimize the negative effect of time-varying delays in the closed-loop performance and, (ii) to actively compensate the effect of mismatched disturbances in the controlled output. Moreover, a sufficient condition based on Linear Matrix Inequalities (LMI) is provided to obtain the maximum delay interval that ensures the stability of the closed-loop system. Finally, the achieved benefits of the proposal are shown by simulation in open-loop unstable plants, and experimentally validated in a test-bed quadrotor platform. (C) 2018 ISA. Published by Elsevier Ltd. All rights reserved., This work was supported in part by European Commission as part of Project H2020-SEC-2016-2017, Topic: SEC-20-BES-2016 Id: 740736 C2 Advanced Multi-domain Environment and Live Observation Technologies , in part by the Spanish Ministry of Economy, Industry, and Competition under Project TIN2017-86520-C3-1-R, in part by Universitat Politècnica de València under Project FPI-UPV 2017 PAID-01-17, and in part by Spanish Government/European Union Project DPI2015-69376-R (MINECO/FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Output-feedback anti-disturbance predictor-based control for discrete-time systems with time-varying input delays

  • González Sorribes, Antonio|||0000-0003-2690-0472
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] This paper investigates the robust stabilization of discrete-time systems with time-varying input delays and model uncertainties by predictor-based anti-disturbance output-feedback control strategies. Here, a novel predictor-feedback control combined with an extended state observer is proposed. The objective is to counteract the negative effects of input delays while actively rejecting disturbance signals typically encountered in engineering practice, such as steps or harmonics. Differently from previous approaches, unknown but bounded time-varying delays are taken into consideration. Moreover, the complexity of the algorithm for control synthesis is notably reduced. Finally, an illustrative example from the literature is provided to show that better robust performance can be achieved with the proposed method., This work was partially supported by projects TIN201786520C31R, Ministerio de Economia y Competitividad (Spain) , and PGC2018098719BI00, MCIU/AEI/FEDER, UE, and Group DGA T4517R, Spain. The material in this paper was not presented at any conference. This paper was recommended for publication in revised form by Associate Editor Bin Zhou under the direction of Editor Ian R. Petersen.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Predicting the future state of disturbed LTI systems: A solution based on high-order observers

  • Castillo-Frasquet, Alberto
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] Predicting the state of a system in a relatively near future time instant is often needed for control purposes. However, when the system is affected by external disturbances, its future state is dependent on the forthcoming disturbance; which is -in most of the cases- unknown and impossible to measure. In this scenario, making predictions of the future system-state is not straightforward and -indeed-there are scarce contributions provided to this issue. This paper treats the following problem: given a LTI system affected by continuously differentiable unknown disturbances, how its future state can be predicted in a sufficiently small time-horizon by high-order observers. Observer design methodologies in order to reduce the prediction errors are given. Comparisons with other solutions are also established., This work was supported by projects FPU15/02008, Ministerio de Educacion y Ciencia, Spain; and TIN2017-86520-C3-1-R, Ministerio de Ciencia, Innovacion y Universidades, Spain. The material in this paper was not presented at any conference. This paper was recommended for publication in revised form by Associate Editor Mario Sznaier under the direction of Editor Andre L. Tits.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Extended state observer-based control for systems with locally Lipschitz uncertainties: LMI-based stability conditions

  • Castillo-Frasquet, Alberto
  • Fridman, Emilia
  • García Gil, Pedro José|||0000-0002-1202-1269
  • Albertos Pérez, Pedro
[EN] This paper deals with the closed-loop stability of an extended state observer-based control for systems with locally Lipschitz uncertainties. Novel stability conditions are developed, in terms of Linear Matrix Inequalities (LMI), in order to prove its local/global input-to-state or exponential stability, respectively. The stability conditions of this paper do not require neither the uncertainty to satisfy the so-called matched condition, nor the system to be expressed in the canonical integral chain form. LMI-based optimization methodologies are also developed in order to optimize the presented results., This work was partially supported by projects FPU15/02008, Ministerio de Educacion y Cultura, Spain; and TIN2017-86520-C3-1-R, Ministerio de Ciencia, Innovación y Universidades, Spain .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Robust Compensation of Delay and Diffusive Actuator Dynamics Without Distributed Feedback

  • Sanz Diaz, Ricardo
  • Krstic, M.
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] This paper deals with robust observer-based output-feedback stabilization of systems whose actuator dynamics can be described in terms of partial differential equations (PDEs). More specifically, delay dynamics (first-order hyperbolic PDE) and diffusive dynamics (parabolic PDE) are considered. The proposed controllers have a PDE observer-based structure. The main novelty is that stabilization for an arbitrarily large delay or diffusion domain length is achieved, while distributed integral terms in the control law are avoided. The exponential stability of the closed loop in both cases is proved using Lyapunov functionals, even in the presence of small uncertainties in the time delay or the diffusion coefficient. The feasibility of this approach is illustrated in simulations using a second-order plant with an exponentially unstable mode., This work was supported in part by Project TIN2017-86520-C3-1-R, Ministerio de Economia y Competitividad, in part by the 16/17 UPV Mobility Award, and in part by the FPI-UPV 2014 Ph.D. Grant, Universitat Politecnica de Valencia, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Predictive ESO-based control with guaranteed stability for uncertain MIMO constrained systems

  • Castillo-Frasquet, Alberto
  • Santos, Tito L.M.
  • Normey-Rico, Julio Elias
  • García Gil, Pedro José|||0000-0002-1202-1269
[EN] In this paper, a novel predictive Extended State Observer (ESO)-based discrete controller with guaranteed input-to-state stability is developed. Predictive controllers based on ESOs are gaining acceptance for regulating MIMO systems with disturbances, uncertainties or actuator constrains. However, there is an important concern about this control structure regarding its closed-loop stability; a key property that is not strictly guaranteed with the most part of the previous formulations. This paper shows that ¿under the same assumptions that are normally taken in the ESO literature¿ a predictive ESO-based controller that is proved to be input-to-state stable can be easily constructed by adding two fixed terms in the cost-index definition. A simulation case study of the glucose control in patients with type-1 diabetes is additionally given in order to illustrate the main advantages of this control structure., This work was partially supported by projects FPU15/02008 and TIN2017-86520-C3-1-AR, Ministerio de Economia y Competitividad, Spain. Tito L.M Santos and Julio Elias Normey-Rico would also like to thank CNPq, Brazil project 305785/2015-0 for its financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Processing at the Edge: A Case Study with an Ultrasound Sensor-Based Embedded Smart Device

  • Poza-Lujan, Jose-Luis|||0000-0003-2450-9920
  • Posadas-Yagüe, Juan-Luis|||0000-0002-5017-8689
  • Uribe-Chavert, Pedro
  • Sáenz-Peñafiel, Juan-José
[EN] In the current context of the Internet of Things, embedded devices can have some intelligence and distribute both data and processed information. This article presents the paradigm shift from a hierarchical pyramid to an inverted pyramid that is the basis for edge, fog, and cloud-based architectures. To support the new paradigm, the article presents a distributed modular architecture. The devices are made up of essential elements, called control nodes, which can communicate to enhance their functionality without sending raw data to the cloud. To validate the architecture, identical control nodes equipped with a distance sensor have been implemented. Each module can read the distance to each vehicle and process these data to provide the vehicle's speed and length. In addition, the article describes how connecting two or more CNs, forming an intelligent device, can increase the accuracy of the parameters measured. Results show that it is possible to reduce the processing load up to 22% in the case of sharing processed information instead of raw data. In addition, when the control nodes collaborate at the edge level, the relative error obtained when measuring the speed and length of a vehicle is reduced by one percentage point., This research was funded by the Spanish Science and Innovation Ministry MICINN: CICYT project PRECON-I4: "Predictable and dependable computer systems for Industry 4.0" TIN2017-86520-C3-1-R.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Gain-scheduled predictive extended state observer for time-varying delays systems with mismatched disturbances

  • Gonzalez, A.
  • Balaguer, V.
  • Garcia, P.
  • Cuenca, A.
In this paper, a novel control scheme for systems with input and output time-varying delays is provided in discrete-time domain. The control strategy combines predictor-like techniques with a delay-dependent gain-scheduled extended state observer. The main goal is twofold: (i) to minimize the negative effect of time-varying delays in the closed-loop performance and, (ii) to actively compensate the effect of mismatched disturbances in the controlled output. Moreover, a sufficient condition based on Linear Matrix Inequalities (LMI) is provided to obtain the maximum delay interval that ensures the stability of the closed-loop system. Finally, the achieved benefits of the proposal are shown by simulation in open-loop unstable plants, and experimentally validated in a test-bed quadrotor platform.