Skip to main content

Electrodomésticos hiper sostenibles y con alto impacto en la experiencia culinaria (HIPATIA)

CPP2021-008938

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprogram Subprograma Estatal de Transferencia de Conocimiento
Call Proyectos en Colaboración Público-Privada
Call year 2021
State Plan 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre BSH ELECTRODOMESTICOS ESPAÑA, S.A.

Resultados relacionados

Resultados totales (Incluyendo duplicados): 29
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Análisis de identificabilidad estructural de un sistema de transferencia de calor, Structural identifiability analysis of a heat transfer system

  • Sanz Bermejo, Fco. Javier
  • Ramirez-Laboreo, Edgar
  • Sagüés Blázquiz, Carlos
[EN] Excessive energy consumption is currently a big deal for society. Part of the solution to this problem is to improve the efficiency of extensive use systems, particularly thermal systems. One way to address this is through the building of energy improvement oriented models. These models depend on a priori unknown parameters that must be estimated. In this sense, identifiability is an essential property to be analyzed in any parametric estimation process. In this paper, we present a lumped-parameter model of a thermal system. Then, we analyze its identifiability using the local isomorphism theorem. Finally, we discuss two scenarios depending on the measured variables. In the first one we have measurements of the complete state and we show that the model is identifiable, while in the second one we have partial measurements and the model turns out to be non-identiafiable. Finally, we propose an additional analysis in which we determine the minimum set of variables to be measured for the model to be identifiable., [ES] El excesivo consumo energético es actualmente un gran problema para la sociedad. Parte de la solución a este problema pasa por mejorar la eficiencia de los sistemas de uso extensivo, particularmente los sistemas térmicos. Una forma de abordarlo es mediante la construcción de modelos orientados a la mejora energética. Estos modelos dependen de parámetros, a priori desconocidos, que se deben estimar. En este sentido, la identificabilidad es una propiedad esencial que se debe analizar en cualquier proceso de estimación paramétrica. En este trabajo, presentamos un modelo de parámetros concentrados de un sistema térmico. Después, analizamos su identificabilidad empleando el teorema del isomorfismo local. Finalmente discutimos dos escenarios en función de las variables medidas. En el primero disponemos de medidas del estado completo y demostramos que el modelo es identificable, mientras que en el segundo disponemos de medidas parciales y el modelo resulta ser no identificable. Finalmente, planteamos un análisis adicional en el que determinamos el conjunto mínimo de variables a medir para que el modelo sea identificable., Esta publicación es parte de los proyectos de I+D+i CPP2021-008938, PID2021-124137OB-I00 y TED2021-130224B-I00, financiados por MCIN/AEI/10.13039/501100011033, por FEDER Una manera de hacer Europa y por la Union Europea NextGenerationEU/PRTR. La investigación también ha sido parcialmente financiada por el Gobierno de Aragón, mediante subvenciones para la contratación de personal investigador predoctoral en formación 2022-2026 (contrato de Fco. Javier Sanz Bermejo) y subvenciones destinadas a fomentar la actividad investigadora de los grupos de investigación (grupo “Robótica, Visión por Computador e Inteligencia Artificial”, T45 23R).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Self-adaptive overtemperature protection materials for safety-centric domestic induction heating applications

  • Pascual, A.
  • Acero, J.
  • Llorente, S.
  • Carretero, C.
  • Burdio, J. M.
Security aspects in the household sphere have become a major concern in modern societies. In particular, regardless of the technology used, users increasingly appreciate a protection system to prevent material damage in the case of human errors or distractions during the cooking process. This paper presents a sensorless method for detecting and limiting overtemperature, unique to induction cooktops, based on their specific features, such as automatic pot detection and load power factor estimation. The protection system exploits the change in the load material properties at certain temperatures, the effect of which may be enhanced by arranging a multilayer structure comprising a low Curie temperature alloy and an aluminum layer. The proposed multilayer load exhibits two differentiated states: a normal state, where the cookware is efficiently heated, and a protection state, above the safety temperature, where the power factor abruptly decreases, limiting the overheating and making the state easily detectable by the cooktop. This method of overtemperature self-protection uses the electronics of conventional induction cooktops; therefore, no other sensors or systems are required, reducing its complexity and costs. Simulation and experimental results are provided for several cookware designs, thereby proving the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Printed circuit board coils of multi-track litz structure for 3.3 kW inductive power transfer system

  • Narvaez, Alexis
  • Carretero, Claudio
  • Lope, Ignacio
  • Acero, Jesús
This paper presents the optimization procedure of an inductive power transmission (IPT) system which utilizes large size spiral printed circuit board (PCB) coils for high- power transfer. Printed circuit boards for coil assembly provides advantages in the manufacturing process through the use of cost- effective flexible fabrication techniques. Furthermore, this kind of construction offers a low profile device, which is of great interest for applications with space constraints. PCB-based IPT system coils can achieve high energy efficiency by applying litz-structure braiding techniques, as investigated in this work, where the objective was to obtain an optimized balance between the conduc- tion losses and proximity losses associated with the number and dimensions of the traces. Considering the geometrical dimensions and manufacturing constraints, we will proceed to obtain the characteristics of the coil to achieve optimal performance. The estimation of coil losses were in part based on finite element simulations, and the results were conveniently processed with the appropriate mathematical methods. Numerical simulation and experimental results were conducted for validation on a prototype suitable to transfer up to 3.3 kW for a transmitter- receiver distance of 10 cm. In the experimental arrangement, a maximum efficiency in the coils of 93% has been measured, and the overall efficiency of 88% has been reached for the entire IPT system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An audio-based iterative controller for soft landing of electromechanical relays

  • Serrano-Seco, Eloy
  • Ramírez-Laboreo, Edgar
  • Moya-Lasheras, Eduardo
  • Sagues, Carlos
Electromechanical relays and contactors suffer from strong collisions at the end of the switching operations. This causes several undesirable phenomena, such as clicking, mechanical wear and contact bounce. Thus, there is great interest in mitigating these switching impacts while keeping the advantageous features of these devices. This paper proposes a complete control strategy for soft landing. The control structure includes three main components. The first one is a real-time flux-tracking feedback controller, which presents several advantages over voltage or current control. The second one is a feedforward controller, which computes the flux reference signal based on a proposed dynamical model and the desired position trajectory for the switching operations. Lastly, the third control component is a learning-type run-to-run adaptation law that iteratively adapts the model parameters based on an audio signal. It exploits the repetitive nature of these devices in order to circumvent modeling discrepancies due to unit-to-unit variability or small changes between operations. The effectiveness of the proposed control is demonstrated through various experiments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Small-sized immersible water heaters for domestic induction heating technology

  • Pascual, Alberto
  • Acero, jesús
  • Llorente, Sergio
  • Carretero, Claudio
  • Burdio, José M.
Induction cooktops are a key element in home electrification. This paper presents a new use of induction cooktops, which allows the preparation of infusions directly in a ceramic mug. It is proposed the design of a water heater with an immersible metallic load. The dimensions of the load allow its embedding in small ceramic vessels. Despite being smaller than conventional inductors, the immersible load has a specific shape that allows it to efficiently receive the energy from the induction cooktops and quickly heat the liquid inside the mug. Its geometry consists of a flat disk with sidewalls on its edge, which provides low reluctance paths for the magnetic field, resulting in improved transmitted power and efficiency. The load is arranged in a multilayer structure consisting of a ferromagnetic alloy with low Curie temperature at the bottom and aluminum on the top, which confers self-detection capabilities against dangerous overheating. The study of the proposal has been carried out with a finite element analysis model, and the feasibility of this proposal has been demonstrated through experimental results of its performance. Finally, the immersible water heater, powered by an induction cooktop, has been compared to other liquid heating systems, such as the microwave and the kettle, with promising results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Electromagnetic modeling and analysis of multimaterial cookware for domestic induction heating

  • Pascual, Alberto
  • Acero, Jesús
  • Carretero, Claudio
  • Llorente, Sergio
  • Burdio, José M.
The performance of induction cooktops (inductor and electronic power converter) is closely related to the inductive properties of the cookware used. Traditionally, they are designed to work optimally with fully ferromagnetic cookware. However, multimaterial cookware with a bottom surface composed of a ferromagnetic material and small pieces of aluminum are nowadays more commonly used. Designing cooktops to also work optimally with this cookwares requires identifying the equivalent parameters, Req and Leq, obtained from the electromagnetic models of the inductor-load system. Modeling multimaterial cookware, with a large number of inserts, complicates the model design and increases its computational cost. This work presents an equivalent model for multimaterial loads that allows the evaluation of the inductor performance and obtaining the equivalent parameters quickly and accurately. The multimaterial cookware is modeled as a disk of uniform material with equivalent electromagnetic properties, µr,eq and σeq, which depend on the properties of each material and the proportion of area they occupy. The equivalent model has been validated by electromagnetic simulation using a FEA tool and by experimental results. Finally, based on the results obtained, an analysis has been carried out to evaluate the importance of design factors such as the choice of the cookware base material and the size, arrangement, and number of inserts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

GaN-based matrix resonant power converter for domestic induction heating

  • Guillen, P.
  • Sarnago, H.
  • Lucía, O.
  • Burdio, J. M.
Flexible-surface induction cooktops must operate with a variety of induction heating loads with different behavior and power setpoints to be heated simultaneously. In this context, multi-output inverter topologies aim at achieving independent power management while featuring low power-device count and high power density. However, they suffer from limitations when applying classical modulation strategies to ensure soft switching, which is required to reduce transistor losses and achieve efficient operation. In this scenario, wide band-gap devices reduce switching losses, opening a new paradigm in power conversion where soft switching is not mandatory in order to achieve high efficiency. This paper proposes an implementation of a multi-output resonant inverter based on GaN HEMTs and evaluates various modulation strategies in terms of efficiency under different switching modes. The proposed approach is designed and experimentally validated by means of a 2-coil 2000 W prototype implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Digital twins for monitoring and predicting the cooking of food products: A case study for a French crêpe

  • Cabeza-Gil, Iulen
  • Ríos-Ruiz, Itziar
  • Martínez, Miguel Ángel
  • Calvo, Begoña
  • Grasa, Jorge
The food industry is shifting toward automated and customized processes, leading to the emergence of smart cooking devices that improve cooking outcomes. However, these devices can be invasive, costly, and only applicable to certain foods. To address these issues, a noninvasive digital twin that monitors food during cooking using a common frying pan with a temperature sensor and a weighing scale is proposed. A case study for a French crêpe is presented, in which we developed a digital twin using a neural network trained on over 400,000 simulation data points. The results show that the digital twin can accurately estimate the properties of the crêpe during cooking in real time with a mean absolute percentage error of less than 5% and predict when it will be cooked according to user criteria. The approach offers significant benefits over existing smart cooking devices, as it can be applied to a wide range of cooking processes. The proposed technology enables food process automation and has potential applications in both home and professional kitchens.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards domestic cooking efficiency: A case study on burger pan frying using experimental and computational results

  • Hernández-Alhambra, E.
  • Guíu, P.
  • Cabeza-Gil, I.
  • Ferrer-Mairal, A.
  • Martínez, M. A.
  • Calvo, B.
  • Grasa, J.
  • Salvador, M. L.
It is well known that the use of efficient domestic cooking appliances and equipment can not only save energy, but also improve the quality of the food being prepared. This work raises the question of whether cooking procedures can also contribute to this energy efficiency. Focusing on burger pan frying, experimental data were used to develop a model able to predict cooking outcomes under different power levels supplied by an induction hob. The proposed model takes into account not only the heat consumed by water evaporation in the contact region but also the shrinkage process of the hamburger. A new formulation based on the multiplicative decomposition of the strain deformation gradient is proposed to describe the observed decoupling between weight and volume loss during the process. The model properly predicts temperature, moisture loss and shrinkage, and allows elucidation of the effects of supplying different amounts of energy on the final water content.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Coupling between cavity resonances and characteristic modes on household appliances

  • Labodía, Miguel
  • Español, Jorge
  • Tesa, Jorge
  • Mediano, Arturo
Home appliances generally comprise a mechanical envelope, or enclosure, of electrically conductive material (steel, aluminum, etc.) that houses electrical and electronic circuits. That envelope typically includes all kind of apertures, openings, holes, slots, windows, etc., to connect—physically and electromagnetically—the external space with its internal space. The performance of that envelope is a key element to comply with surface current EMI/EMC (Electro-Magnetic Interference/Electro-Magnetic Compatibility) regulations for electromagnetic interference, both emissions and immunity. Here, we present a novel theoretical proposal that consists of establishing the mathematical relationship of the coupling between the resonant modes of an internal cavity (RMs) contained in a conductive body and the characteristic modes (CMs) on the external surface of its envelope through the openings that connect those external and internal spaces, and doing so by means of equivalent virtual surface currents located in those openings. The comparative results of simulations and actual measurements of immunity in an anechoic chamber (measurements originally oriented to other purposes) are presented as above-mentioned evidence of resonating modes coupling on the frequency range 40–1000 MHz. However, this theoretical proposal is novel and remains to be developed in greater depth and detail in future works.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Comparative evaluation of different cables for magnetic couplers in inductive power transfer systems

  • Acero, Jesús
  • Lope, Ignacio
  • Carretero, Claudio
  • Sarnago, Héctor
  • Burdío, José Miguel
Copper litz wires are widely used in wireless charging stations of light-duty electric vehicles. This type of cable is specifically mentioned in the SAE J2954 standard. However, details as the number and diameter of strands, or the material of conductors are not mentioned in the standard, which makes room to address some research and innovations. In this work, several alternatives to the traditional copper-litz wires are analyzed. Specifically, aluminum litz wire, copper-clad aluminum litz wire, and copper tubes are considered as alternatives to standard litz wire for the mentioned application. Potential benefits of the considered alternatives could include weight and cost savings. However, these advantages could not be enough to justify a wiring change if the resistance of the power pads increases and, equivalently, the efficiency of the electromagnetic power transfer decreases. For this reason, a model of the parasitic resistance of windings is proposed by combining the analytical ac resistance of two-layered round strands and finite element simulations. This model is used to obtain a figure of merit related with the efficiency of the electromagnetic energy transfer which is used to compare the different cables. Apart from efficiency, thermal behavior, cost and weight are also considered for comparison purposes. As a result, some conclusions about the suitability of each cable with respect to the operating frequency range are extracted.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dual-Output Extended-Power-Range Quasi-Resonant Inverter for Induction Heating Appliances

  • Sarnago, Hector
  • Burdio, Jose M.
  • Lucia, Oscar
Induction heating technology provides efficient and reliable heating processes that outperform other classical heating methods based on fossil fuels or resistive heating. Among its many industrial, domestic, and biomedical applications, domestic induction heating appliances are a popular choice due to these advantages. This technology requires high-performance and cost-effective inverters that take most of the power devices and the converter topology. Depending upon the desired performance and output-power range, different power converters are employed. However, currently, most platforms rely on the well-known series resonant half-bridge topology. Single-switch topologies offer a cost-effective implementation but are limited to the low-cost low-performance markets due to their limitations in terms of output power and power control. In this context, this paper proposes a high-performance dual-output quasi-resonant inverter for modern induction heating appliances. Unlike state-of-the-art proposals, this converter achieves a full-output-power operating range of up to 3.6 kW. Consequently, it provides a high-performance cost-effective alternative to current implementations. The proposed converter is analyzed in this paper and experimentally verified using a dual-output 3.6-kW induction heating appliance prototype.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Normalized nonlinear impedance boundary condition in anhysteretic magnetic material for eddy current problems

  • Carretero, Claudio
  • Acero, Jesús
  • Burdio, José M.
Numerical simulations of induction heating systems often assume that the properties of the induction load are linear. Thus, its electrical behavior is described by an equivalent impedance which exhibits frequency dispersion but remains independent of the excitation level. Although deriving such solutions is computationally complex, the use of the impedance boundary condition (IBC) provides high-quality results for linear media. This boundary condition replaces the effects of media with rapidly varying fields by a ratio between their tangential components at the surface. However, in typical induction loads, magnetic saturation of the material causes phenomena of dependence of the properties on the current level. The precise formulation of such an IBC can only be performed considering linear media. This paper proposes calculating a nonlinear excitation level-dependent IBC numerically, considering the saturation dependence of the magnetic properties given by a Langevin function BH-loop. A normalized form of the nonlinear IBC will be obtained from the equation governing this type of behavior, thereby reducing the computational cost of the solution. The usefulness of the proposed nonlinear IBC will be validated by comparing it with results obtained from conventional time domain simulations of a typical induction heating system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Fröhlich model characterization of magnetic properties of the induction heating load

  • Lahuerta, Óscar
  • Ortega, José
  • Carretero, Claudio
  • Martínez, Juan Pablo
  • Acero, Jesús
Purpose: The purpose of this paper is the identification of the magnetic characteristics of the induction load by means of the B–H curve proposed by Fröhlich. Design/methodology/approach: An electromagnetic description of the inductor system is performed to substitute the effects of the induction load, for a mathematical condition, the so-called impedance boundary condition (IBC). Findings: A significant reduction in the computational cost of electromagnetic simulation has been achieved through the use of the IBC, resulting in a computation time approximately 400 times faster than time domain simulation. Moreover, an alternative method has been developed to experimentally identify the parameters that determine the magnetic behavior of the induction load. Finally, further research has been conducted to understand the relationship between the equivalent impedance of an induction load and the excitation current level. Practical implications: This work is performed to achieve a better understanding of the fundamentals involved in the electromagnetic modeling of an induction heating system. Originality/value: This paper introduces the dependence on the excitation level based on a first harmonic approximation and extends the IBC to nonlinear magnetic materials which allows the identification of the magnetic characteristics of the induction load.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A versatile switched-mode large-signal gan-based low-distortion arbitrary waveform generator

  • Álvarez-Gariburo, Ignacio
  • Sarnago, Héctor
  • Burdío, José M.
  • Lucia, Oscar
In a multitude of industrial and biomedical applications, the need for arbitrary waveform generators is essential, serving the purpose of load characterization and excitation, among others. Historically, these generators have had limitations in terms of voltage, current, and frequency output, primarily related with constraints associated with the power devices and circuit topologies. However, notable advancements in semiconductor technology have introduced a new era, enabling the creation of highly versatile waveform generators capable of superior performance, and extended operational capabilities. In this article, a versatile AWG based on switched modules is proposed. In contrast to the previous ones, whose implementation was based on linear amplifiers, it enables arbitrary waveform generation, higher efficiency, and very low output impedance. In addition, it is also presented as a novelty that the voltage in each of the modules is different, following a digital to analog converter (DAC) structure, which allows us to obtain a lower total harmonic distortion (THD) in the output waveform than with conventional methods. The design will take advantage of wide band gap devices to be able to switch in the MHz range to achieve a high bandwidth. Furthermore, in addition to the design and implementation of a high-performance generator, a comparative analysis between the conventional and the proposed DAC-based modulation pattern is performed based on a comparative analysis of the THD and switching losses.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Incorporating composition into life cycle assessment of steel grades

  • García Gutiérrez, Isabel
  • Pina, Carmelo
  • Tobajas, Rafael
  • Elduque, Daniel
Steel is a vital material in modern industries due to its versatility and remarkable properties. In a world that is increasingly concerned about the environment, it is necessary to incorporate good practices that help reduce the environmental impact of our economies. An important aspect is evaluating the environmental impact of materials throughout their life cycle. However, calculating this impact using generic databases can be challenging, as they may lack the necessary specificity. To obtain more accurate environmental impact calculations, it is essential to consider the composition of the materials. Each steel grade, for example, can vary in the content of alloying elements, which influences its environmental impact. Therefore, particularising calculations based on compositions is essential for making informed and sustainable material selection decisions. This article presents a calculation methodology to establish a Life Cycle Inventory of steel, emphasising the specific composition and using datasets of steel production in a Basic Oxygen Furnace (BOF) developed by ecoinvent as reference. The methodology presented seeks to allow the systematic calculation of the environmental impact of any steel considering its composition, contribute to the incorporation of environmental criteria in the selection of materials, and quantify the content of critical raw materials according to the latest report published by the European Union. Likewise, a case study is included, in which the composition's influence on the environmental impact of 10 steel grades widely used in induction cooktops has been analysed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Iterative-only learning control for soft landing of short-stroke reluctance actuators

  • Moya-Lasheras, Eduardo
  • Sagues, Carlos
Short-stroke reluctance actuators, such as electromechanical relays and solenoid valves, often experience strong impacts at the end of standard switching operations, leading to problems like contact bounces, mechanical wear or acoustic noise. This paper introduces a novel iterative learning controller for tracking the actuator position during switching operations and ultimately decreasing the impact velocities. The control strategy is designed based on a generalized dynamical description, allowing for its application to a broad range of actuators and models. A highlight of the proposal is the absence of a real-time feedback controller, which eliminates the need for real-time measurements. Another important feature is the adaptation of the learning control gain based on a soft-landing performance index. The control performance is analyzed and validated in conjunction with an offline position estimator through Monte Carlo simulations and experimental testing. The results show that the position tracking remains accurate even in the presence of non-repeating perturbations and estimation errors, leading to a substantial reduction in switching impacts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Predicting optimal flipping conditions during burger pan cooking with a numerical model

  • Hernández-Alhambra, E.
  • Guiu, P.
  • Ferrer-Mairal, A.
  • Martínez, M.A.
  • Calvo, B.
  • Grasa, J.
  • Salvador, M.L.
This study analyzes the influence of the number of flips on the cooking performance of burgers by heating contact using results from both experimental test and computational simulation. The analysis employs a previously developed multiphysics model that accounts for heat and moisture transfer as well as product deformation. The turning process was simulated considering two heat sources representing the cooking pan that are alternately activated and deactivated to heat either surface of the product. Furthermore, a set of experiments were carried out to validate the model outcomes recording data of temperature at the center and upper surface of the burger, weight loss, and shrinkage at different number of flips. When performing only one flip, great moisture expelling was observed at the top surface, while multiple flips facilitates moisture retention, reducing cooking losses and shrinkage since it allows for a reduction in cooking time to reach the desired temperature. However, more than five flips do not significantly improve these effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A versatile plasma generation power supply featuring a multilevel converter for arbitrary waveforms generation

  • Álvarez Gariburo, Ignacio Jesús
  • Sarnago, Hector
  • Lucia, Oscar
Purpose Plasma technology has become of great interest in a wide variety of industrial and domestic applications. Moreover, the application of plasma in the domestic field has increased in recent years due to its applications to surface treatment and disinfection. In this context, there is a significant need for versatile power generators able to generate a wide range of output voltage/current ranging from direct current (DC) to tens of kHz in the range of kVs. The purpose of this paper is to develop a highly versatile power converter for plasma generation based on a multilevel topology. Design/methodology/approach This paper proposes a versatile multilevel topology able to generate versatile output waveforms. The followed methodology includes simulation of the proposed architecture, design of the power electronics, control and magnetic elements and test laboratory tests after building an eight-level prototype. Findings The proposed converter has been designed and tested using an experimental prototype. The designed generator is able to operate at 10 kVpp output voltage and 10 kHz, proving the feasibility of the proposed approach. Originality/value The proposed converter enables versatile waveform generation, enabling advanced studies in plasma generation. Unlike previous proposals, the proposed converter features bidirectional operation, allowing to test complex reactive loads. Besides, complex waveforms can be generated, allowing testing complex patterns for optimized cold-plasma generation methods. Besides, unlike transformer- or resonant-network-based approaches, the proposed generator features very low output impedance regardless the operating point, exhibiting improved and reliable performance for different operating conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

On the Stability of Electromechanical Switching Devices

  • Ramirez-Laboreo, Edgar
  • Sagues, Carlos
  • Moya-Lasheras, Eduardo
  • Serrano-Seco, Eloy
Electromagnetic relays and solenoid actuators are commonly used for their bistable behavior, which allows for switching between two states in electrical, pneumatic, or hydraulic circuits, among other applications. Although there has been extensive research on modeling, estimation, and control of these electromechanical systems, a gap remains in the analysis area. This article addresses this gap by presenting an equilibrium and stability analysis to gain deeper insight into their bistability. This analysis leverages a hybrid dynamical model to obtain analytical expressions that relate the physical parameters to the switching conditions. These expressions are useful, e.g., for fundamental understanding, quick analyses, or design optimization. The results are discussed in depth and potential practical applications are explored. Finally, the analysis is validated with experimental results from a real device.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Food cooking process modeling with neural networks

  • Fañanás-Anaya, Javier
  • López-Nicolás, Gonzalo
  • Sagüés, Carlos
  • Llorente, Sergio
Food cooking process are complex dynamical systems to model. In the state of the art we find that a good solution consists of physics-based finite element models (FEM). FEM models, although being very accurate, have a high computational cost making them unfeasible for real-time applications. To solve this problem, we consider neural networks (NN) trained from FEM simulations. Specifically, we propose a Nonlinear AutoRegressive with eXogenous inputs Neural Network (NARX-NN). The main novelty is that we define a novel training algorithm adapted to the modeling of real-time dynamical systems, allowing a NARX-NN with a simple structure to obtain a negligible error compared to the results of the original FEM model. The NARX-NN trained with the proposed training algorithm obtains an R-squared of more than 0.99 in the test simulations, while the same NARX-NN trained with the standard training algorithm obtains an R-squared of 0.78 in the same tests. The proposed NARX-NN achieves a speedup of 8 orders of magnitude compared to the original FEM model. Moreover, the developed NN is able to predict the complete cooking of the food in a few milliseconds without the need of external sensors. Alternatively, our approach can also be used in real time with information captured with sensors. The presented methodology is highly scalable and could be adapted to different types of food and cooking processes, as well as to other dynamical systems in general.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Dynamical system simulation with attention and recurrent neural networks

  • Fañanás-Anaya, Javier
  • López-Nicolás, Gonzalo
  • Sagüés, Carlos
Accurate and efficient real-time simulation of nonlinear dynamic systems remains an important challenge in fields such as robotics, control systems and industrial processes, requiring innovative solutions for predictive modeling. In this work, we introduce a novel recurrent neural networks (RNN) architecture designed to simulate complex nonlinear dynamical systems. Our approach aims to predict system behavior at any time step and over any prediction horizon, using only the system’s initial state and external inputs. The proposed architecture combines RNN with multilayer perceptron and incorporates an attention mechanism to process both previous state estimates and external inputs. By training without teacher forcing, our model can iteratively estimate the system’s state over long prediction horizons. Experimental results on three public benchmarks show that our method outperforms other state-of-the-art solutions. We highlight the potential of our proposal for modeling and simulating nonlinear systems in real-world applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A Cost-Effective Nonresonant Inverter Topology for Domestic Induction Heating

  • Rehm, Felix
  • Sarnago, Héctor
  • Schwendemann, Rüdiger
  • Lucía, Óscar
  • Hiller, Marc
Nonresonant inverter topologies are a reliable, self-protective, and cost-effective solution for induction heating (IH) appliances. In this article, a novel nonresonant inverter topology, particularly suitable for domestic IH applications, is proposed. The proposed topology achieves high output voltage levels, addressing the main drawback of nonresonant topologies compared to resonant ones, which is an increased voltage demand for the same output power. In addition, both switching devices operate against a common ground, enabling a cost-effective implementation with high power density. In this article, the proposed inverter is described, its different operating modes are analyzed, and a power control strategy is derived. A comparison with conventional resonant topologies reveals a potential cost reduction of approximately 13% in the main power electronics components, due to the elimination of resonant capacitors and the possibility of using more cost-effective gate drivers. Experimental results demonstrate that the output power can be seamlessly controlled from zero to 3.6kW, while maintaining zero-voltage switching across a wide operational range. This ensures efficient operation with a maximum estimated efficiency of 98.3%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A hybrid algorithm for iterative adaptation of feedforward controllers: An application on electromechanical switches

  • Serrano-Seco, Eloy
  • Moya-Lasheras, Eduardo
  • Ramirez-Laboreo, Edgar
Electromechanical switching devices such as relays, solenoid valves, and contactors offer several technical and economic advantages that make them widely used in industry. However, uncontrolled operations result in undesirable impact-related phenomena at the end of the stroke. As a solution, different soft-landing controls have been proposed. Among them, feedforward control with iterative techniques that adapt its parameters is a solution when real-time feedback is not available. However, these techniques typically require a large number of operations to converge or are computationally intensive, which limits a real implementation. In this paper, we present a new algorithm for the iterative adaptation that is able to eventually adapt the search coordinate system and to reduce the search dimensional size in order to accelerate convergence. Moreover, it automatically toggles between a derivative-free and a gradient-based method to balance exploration and exploitation. To demonstrate the high potential of the proposal, each novel part of the algorithm is compared with a state-of-the-art approach via simulation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Radiation Pattern Recovery from Tilted Orbital Sampling Measurements via Sparse Spherical Harmonic Expansion

  • Labodía, Miguel
  • Mediano, Arturo
This paper proposes a reconstruction framework for estimating the far-field (FF) radiation patterns of large, heavy, or non-rotatable wireless-enabled systems. The method combines a tilted orbital sampling (ToS) strategy with sparse spherical harmonic (SH) expansion, compressed sensing (CS), and convex optimization (CO), thereby linking a mechanically constrained acquisition scheme with a mathematically efficient recovery process. The purpose of this integration is not only to reduce the number of measurements but also to retrieve the radiation information most relevant to Internet of Things (IoT) devices and bulky equipment that cannot be easily rotated within anechoic chambers. The framework is validated on two representative cases: a canonical half-wave dipole and a commercial Wi-Fi-enabled device. In the latter and more challenging case, accurate reconstruction is achieved with fewer than 30 SH coefficients and using less than 20% of the measurements required by a conventional full-sphere scan, with the normalized root-mean-square error remaining below 5%. Although inaccessible angular regions may be partially uncharacterized, such directions are of minor relevance for the intended operational coverage. The resulting SH-based representation can be seamlessly integrated into ray-tracing propagation simulators and electromagnetic optimization workflows, enabling efficient and application-oriented OTA characterization under realistic chamber constraints.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Large-strain anisotropic behavior of meat during cooking: A finite element study

  • Grasa, Jorge
  • Teresi, Luciano
  • van der Sman, Ruud
This paper investigates the role of anisotropy in the deformation of meat during cooking, and how it influences transport properties such as diffusion and thermal conductivity. To address this multiphysics problem a Finite Element model was developed, coupling mass transfer of water with thermal energy transport and large-strain solid mechanics. To account for fiber directionality, an anisotropic constitutive model with swelling-driven deformation is implemented. Particular emphasis is given to the definition of the reference configuration. Numerical simulations reveal that fiber orientation significantly influences the local stretch and overall shape evolution during pan frying. The magnitude and anisotropy of the deformation are sensitive to the swelling parameters and the fiber stiffness. These findings offer insights into the physical origin of cooking-induced texture transformations in meat and provide a framework for modeling fibrous biological materials undergoing thermal and fluid-driven processes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Induction Heating Appliances: Fifty Years of Technological Success: Paving the Path for Sustainable Homes

  • Guillén, Pablo
  • Sarnago, Héctor
  • Acero, Jesús
  • Burdío, José Miguel
  • Llorente, Sergio
  • Lucía, Óscar
Creating a sustainable future is a transdisciplinary challenge where industrial electronics (IE) plays a key role by providing environmentally friendly solutions to daily processes. Domestic device electrification is a powerful tool for sustainable energy consumption and indoor air quality improvement. In this context, this article covers a relevant example of household appliance electrification with improved energetic performance: domestic induction heating. Domestic IH has now been on the market for 50 years. This article reviews the main historical milestones in electrical cooking appliances, and presents the enabling technologies and advances behind the success of current IH technology. Additionally, recent technological development advancements and future trends are introduced showing the potential of IH to help pave the path to create a sustainable future.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

FEM modeling of hamburger pan cooking: Fat content influence and neural network-based prediction of fat loss

  • Hernández-Alhambra, E.
  • Guiu, P.
  • Ferrer-Mairal, A.
  • Martínez, M.A.
  • Calvo, B.
  • Grasa, J.
  • Salvador, M.L.
In this study, we developed an improved contact-cooking model that incorporates variations in fat content and its retention capacity, aiming to accurately simulate products with different compositions. The proposed approach incorporates the structural heterogeneity of meat by distinguishing between muscle fibers and interstitial fluid, and simulates the transport of water and fat between these regions. The model also accounts for heat transfer and meat deformation, representing the tissue as a hyperelastic material. The computational framework was implemented for the pan-cooking of hamburgers with different fat contents (ranging from 3% to 24%) and periodic flipping during the process. To validate the model, cooking experiments were performed. Although increasing fat content did not significantly affect water loss or core temperature (p>0.05), it strongly influenced other critical aspects of cooking performance and product quality, such as surface temperature, fat loss, total cooking losses, and shrinkage. These changes are relevant because they impact texture and consumer perception. In addition, hamburgers with a higher fat content exhibited lower hardness, cohesiveness, gumminess, and chewiness. The model successfully predicted these trends, demonstrating its potential to capture fat-related effects beyond thermal behavior and enabling the use of model-generated data for the training, validation, and testing of a simple neural network to predict fat loss during the cooking of hamburgers with varying water, fat, and protein contents.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Hybrid-timescale physics-informed neural network for electrical equivalent impedance identification in induction heating systems

  • Lahuerta, Oscar
  • Carretero, Claudio
  • Barragan, Luis Angel
  • Navarro, Denis
  • Acero, Jesus
This article introduces a hybrid variant of a physics-informed neural network (PINN) that is designed to effectively capture both the rapid dynamics of electrical variables and the slower dynamics of state parameters in a domestic induction heating system. By utilizing observable variables, specifically the voltage and current waveforms from the inductor system, the proposed architecture aims to accurately estimate key electrical parameters, i.e., equivalent resistance and inductance, which vary over time due to the nonlinear magnetic properties of the induction load. To assess the performance of the proposed PINN architecture, a comparison with results obtained using an extended Kalman filter was conducted, which serves as a benchmark for this type of task. In addition, the robustness of both approaches was assessed by introducing varying levels of uncertainty in the observable variables. Finally, the effectiveness of both methods was validated through the analysis of experimental measurements collected from a functional prototype.