Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Nutraceutical potential of leafy vegetables landraces at microgreen, baby, and adult stages of development

  • Mallor, Cristina
  • Bertolín, Juan Ramón
  • Paracuellos, Pablo
  • Juan, Teresa
Nutraceutical compounds present in leafy vegetables have gained substantial attention due to the health benefits they offer beyond their nutritional value. The biosynthesis, composition, and concentration of these compounds vary widely among leafy vegetables and carry the influence of genetic, agronomic, and environmental factors. Recently, micro-vegetables are gaining importance among consumers worldwide and are used in gastronomy at different development stages. Another tendency is the utilization of local genetic resources as an integral component of agricultural biodiversity crucial for sustainable production. The present study identifies the nutraceutical potential of 10 leafy vegetables at the microgreen, baby, and adult development stages using local genetic resources from the Spanish Vegetable Genebank (CITA, Aragón). Specifically, two landraces for each of the following crops were used: chard (Beta vulgaris), spinach (Spinacia oleracea), lettuce (Lactuca sativa), borage (Borago officinalis), and chicory (Cichorium intybus). The results reinforce the value of traditional local genetics and demonstrate the potential of these leafy vegetables as a source of functional compounds (fatty acids, vitamin C, carotenoids, polyphenols, antioxidant activity, and tocopherols). The observed variability depending on the crop and the developmental stage recommends the necessity of having a varied diet, since each leafy vegetable product offers a unique nutritional profile.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Digital twins for monitoring and predicting the cooking of food products: A case study for a French crêpe

  • Cabeza-Gil, Iulen
  • Ríos-Ruiz, Itziar
  • Martínez, Miguel Ángel
  • Calvo, Begoña
  • Grasa, Jorge
The food industry is shifting toward automated and customized processes, leading to the emergence of smart cooking devices that improve cooking outcomes. However, these devices can be invasive, costly, and only applicable to certain foods. To address these issues, a noninvasive digital twin that monitors food during cooking using a common frying pan with a temperature sensor and a weighing scale is proposed. A case study for a French crêpe is presented, in which we developed a digital twin using a neural network trained on over 400,000 simulation data points. The results show that the digital twin can accurately estimate the properties of the crêpe during cooking in real time with a mean absolute percentage error of less than 5% and predict when it will be cooked according to user criteria. The approach offers significant benefits over existing smart cooking devices, as it can be applied to a wide range of cooking processes. The proposed technology enables food process automation and has potential applications in both home and professional kitchens.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Towards domestic cooking efficiency: A case study on burger pan frying using experimental and computational results

  • Hernández-Alhambra, E.
  • Guíu, P.
  • Cabeza-Gil, I.
  • Ferrer-Mairal, A.
  • Martínez, M. A.
  • Calvo, B.
  • Grasa, J.
  • Salvador, M. L.
It is well known that the use of efficient domestic cooking appliances and equipment can not only save energy, but also improve the quality of the food being prepared. This work raises the question of whether cooking procedures can also contribute to this energy efficiency. Focusing on burger pan frying, experimental data were used to develop a model able to predict cooking outcomes under different power levels supplied by an induction hob. The proposed model takes into account not only the heat consumed by water evaporation in the contact region but also the shrinkage process of the hamburger. A new formulation based on the multiplicative decomposition of the strain deformation gradient is proposed to describe the observed decoupling between weight and volume loss during the process. The model properly predicts temperature, moisture loss and shrinkage, and allows elucidation of the effects of supplying different amounts of energy on the final water content.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Predicting optimal flipping conditions during burger pan cooking with a numerical model

  • Hernández-Alhambra, E.
  • Guiu, P.
  • Ferrer-Mairal, A.
  • Martínez, M.A.
  • Calvo, B.
  • Grasa, J.
  • Salvador, M.L.
This study analyzes the influence of the number of flips on the cooking performance of burgers by heating contact using results from both experimental test and computational simulation. The analysis employs a previously developed multiphysics model that accounts for heat and moisture transfer as well as product deformation. The turning process was simulated considering two heat sources representing the cooking pan that are alternately activated and deactivated to heat either surface of the product. Furthermore, a set of experiments were carried out to validate the model outcomes recording data of temperature at the center and upper surface of the burger, weight loss, and shrinkage at different number of flips. When performing only one flip, great moisture expelling was observed at the top surface, while multiple flips facilitates moisture retention, reducing cooking losses and shrinkage since it allows for a reduction in cooking time to reach the desired temperature. However, more than five flips do not significantly improve these effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Role of egg white protein gelling capacity on the processability and properties of compression-moulded films

  • Baquero-Aznar, Víctor
  • Salvador, María L.
  • Fernández-Cuello, Ángel
  • Clavería, Isabel
  • González-Buesa, Jaime
This study aimed to assess the impact of the gelling capacity of powdered egg white protein (EWP) on the processability and properties of compressed-moulded films. Three commercial grades of EWP with varying gelling capacities and three protein-to-plasticiser ratios were selected for film preparation. The EWP structure was characterised by FTIR and XRD, and the relative abundance of proteins was estimated using LC-ESI-MS/MS. The rheological properties of the film-forming solutions (FFS), along with the mechanical, barrier, and optical properties of resulting films, were also evaluated. The EWP samples exhibited differences in secondary structure, soluble protein content, and protein profile, which were reflected in the viscosity, consistency, and elastic modulus of the FFS, all of which increased with gelling capacity. The processability and stability of the FFS were found to depend on the appropriate combination of gel strength and protein-to-plasticiser ratio. In addition to the protein-to-plasticiser ratio, the β-turn abundance in the secondary structure of the EWP film was the parameter most strongly correlated with Young's modulus (p < 0.01). However, the barrier properties of the films were significantly influenced solely by the protein-to-plasticiser ratio (p < 0.01), with higher plasticiser content resulting in increased oxygen and water vapour permeability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Exploring consumer label preferences for fresh vegetables in Aragon: insights for market differentiation

  • Gracia, Azucena
  • Mallor, Cristina
This study determines which labels should be used to differentiate vegetables cultivated in Aragon in the local market, according to consumer preferences. The aim is to analyse the importance consumers attach when buying fresh vegetables to different labels commonly used to market these products. The labels analysed were “Organic”, “Protected Designation of Origin (PDO)”, “C’Alial regional brand”, “Km0”, “Local sales”, “Local variety”, and “Collective producer brand”. A Best-Worst method, in which the respondents must indicate which label is the most and least important, was used. Data was gathered using an online survey of vegetable consumers in Aragon. The sample was stratified by age, gender, and province of residence. Label importance for consumers was assumed to be heterogeneous, and a Latent Class (LC) model was estimated. Results indicate that the most important labels were “Local sales”, followed by “Km0”, “Local variety”, “PDO” and “Organic”. The least valued labels were “C’Alial” and “Collective producer brand”. Therefore, according to the obtained results, producers should focus on proximity markets using local varieties. Consumers’ heterogeneity in the importance they attached to different labels was found. Four classes of consumers were detected and explained by socio-demographic characteristics, the importance of vegetable attributes, the frequency of vegetable consumption, the knowledge of the method of production, and the attitudes and intention to purchase vegetables from local landraces. Accordingly, different strategies should be used to attract different consumers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Novel Egg White Protein–Chitin Nanocrystal Biocomposite Films with Enhanced Functional Properties

  • Baquero-Aznar, Víctor
  • Calvo, Víctor
  • González-Domínguez, José Miguel
  • Maser, Wolfgang K.
  • Benito, Ana M.
  • Salvador, María Luisa
  • González-Buesa, Jaime
This study aims to develop egg white protein (EWP) biocomposite films reinforced with chitin nanocrystals (ChNCs, 1–5 wt.%) by compression molding to overcome the mechanical and barrier limitations of protein-based films for sustainable packaging. ChNC incorporation may modulate film microstructure, crystallinity, and thermal stability, thereby enhancing functional performance. Films were prepared by adding ChNCs either as aqueous suspensions or lyophilized powder, and their structural, thermal, mechanical, optical, and barrier properties were systematically evaluated. Scanning electron microscopy confirmed a more homogeneous dispersion of ChNCs when added as suspensions, while powder addition promoted partial aggregation. X-ray diffraction revealed increased crystallinity with ChNC reinforcement. Mechanical tests showed that films with 2 wt.% ChNCs in suspension exhibited the highest tensile strength, whereas those with 5 wt.% in powder form became stiffer but less extensible. Oxygen permeability was not significantly affected, while water vapor permeability decreased by up to 14.5% at 2 wt.% ChNCs incorporated as powder. Transparency and color remained largely unchanged by ChNC addition, except for a slight increase in yellowness. Overall, these findings demonstrate that the incorporation method and concentration of ChNCs play a crucial role in tailoring the physicochemical performance of EWP films. The results provide new insights into the design of EWP-based nanocomposites and support their potential as bio-derived materials for advanced food packaging applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

FEM modeling of hamburger pan cooking: Fat content influence and neural network-based prediction of fat loss

  • Hernández-Alhambra, E.
  • Guiu, P.
  • Ferrer-Mairal, A.
  • Martínez, M.A.
  • Calvo, B.
  • Grasa, J.
  • Salvador, M.L.
In this study, we developed an improved contact-cooking model that incorporates variations in fat content and its retention capacity, aiming to accurately simulate products with different compositions. The proposed approach incorporates the structural heterogeneity of meat by distinguishing between muscle fibers and interstitial fluid, and simulates the transport of water and fat between these regions. The model also accounts for heat transfer and meat deformation, representing the tissue as a hyperelastic material. The computational framework was implemented for the pan-cooking of hamburgers with different fat contents (ranging from 3% to 24%) and periodic flipping during the process. To validate the model, cooking experiments were performed. Although increasing fat content did not significantly affect water loss or core temperature (p>0.05), it strongly influenced other critical aspects of cooking performance and product quality, such as surface temperature, fat loss, total cooking losses, and shrinkage. These changes are relevant because they impact texture and consumer perception. In addition, hamburgers with a higher fat content exhibited lower hardness, cohesiveness, gumminess, and chewiness. The model successfully predicted these trends, demonstrating its potential to capture fat-related effects beyond thermal behavior and enabling the use of model-generated data for the training, validation, and testing of a simple neural network to predict fat loss during the cooking of hamburgers with varying water, fat, and protein contents.