Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A New Multiparameter Model for Multiaxial Fatigue Life Prediction of Rubber Materials

  • Tobajas, R.
  • Elduque, D.
  • Ibarz, E.
  • Javierre, C.
  • Gracia, L.
Most of the mechanical components manufactured in rubber materials experience fluctuating loads, which cause material fatigue, significantly reducing their life. Different models have been used to approach this problem. However, most of them just provide life prediction only valid for each of the specific studied material and type of specimen used for the experimental testing. This work focuses on the development of a new generalized model of multiaxial fatigue for rubber materials, introducing a multiparameter variable to improve fatigue life prediction by considering simultaneously relevant information concerning stresses, strains, and strain energies. The model is verified through its correlation with several published fatigue tests for different rubber materials. The proposed model has been compared with more than 20 different parameters used in the specialized literature, calculating the value of the R-2 coefficient by comparing the predicted values of every model, with the experimental ones. The obtained results show a significant improvement in the fatigue life prediction. The proposed model does not aim to be a universal and definitive approach for elastomer fatigue, but it provides a reliable general tool that can be used for processing data obtained from experimental tests carried out under different conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Analysis of processing and environmental impact of polymer compounds reinforced with banana fiber in an injection molding process

  • Bordón, Pablo
  • Elduque, Daniel
  • Paz, Rubén
  • Javierre, Carlos
  • Kusic, Dragan
  • Monzón, Mario
The global consumption of thermoplastic materials of fossil origin continues to grow, generating high environmental impacts mainly due to the energy consumed during their production and processing. The use of natural materials, such as banana fiber (BF), present a sustainable alternative for the gradual replacement of these thermoplastic materials, potentially reducing the environmental impact and improving their mechanical performance. This work presents the development of HDPE compounds reinforced with BF for injection molding of components with lower environmental impact. To this end, the processing and treatment of the banana pseudostem fiber have been analyzed, and compounds with fiber percentages of up to 20 wt %, with and without chemical treatment, have been developed and characterized thermal and mechanically. Finally, thickness optimizations of a case study component have been carried out through finite element simulation, with fiber percentages up to 30 wt %, maintaining the stiffness of the original HDPE component. A Life Cycle Assessment was also carried out to assess the influence of the different processing scenarios. The results showed, on the one hand, that the fibers without chemical treatment and with mechanical combing allow improvements in the mechanical properties of HDPE compounds similar to those obtained with chemically treated fibers but considerably reducing the impacts due to the suppression of the fiber treatment (chemical products, subsequent drying, etc.). On the other hand, the environmental impact analysis showed that compounds with percentages of untreated fiber greater than 20 wt % reduce the impact of the components produced compared to pure HDPE. Finally, the incorporation of the BF also allowed the design optimization of the study component, reducing its thickness but maintaining the same original stiffness, further improving its environmental impact.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Influence of the material composition SMD diodes on their environmental impact

  • Pina C.
  • Elduque D.
  • Gómez P.
  • Sarasa J.
  • Javierre C.
The influence of the material composition of surface-mount device (SMD) diodes on the environment has been analysed in this research. This impact assessment has been performed by means of an environmental impact calculation through a life cycle assessment (LCA), in which the EcoInvent dataset has been updated and customised, generating a more precise environmental impact analysis by considering the exact material composition provided by several suppliers of diodes and also recycling during the production stage. Considering the EcoInvent diode dataset as a reference, variations from nearly 1640% to only 8.5% of the environmental impact have been achieved. For example, the impact per 1 g of SMD diodes can change the global warming potential from 292 g CO2 eq up to 354 g CO2 eq, whereas for abiotic depletion, values can change from 9.9 × 10-7 up to 1.9 × 10-4 kg Sb eq. The presence of critical raw materials such as antimony, cobalt, or magnesium, together with precious metals as gold or silver, highly influences the environmental impact values obtained, demonstrating the considerable influence on the environmental impact of the material composition of the SMD diodes analysed. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Life Cycle Assessment of solar energy systems for the provision of heating, cooling and electricity in buildings: A comparative analysis

  • Herrando, María
  • Elduque, Daniel
  • Javierre, Carlos
  • Fueyo, Norberto
A detailed Life Cycle Assessment (LCA) “from cradle to grave” is performed to a solar combined cooling, heating and power (S-CCHP) system that provides space heating, cooling, domestic hot water and electricity, following two different methodologies (the ReCiPe 2016 Endpoint (H/A) v1.03 and the carbon footprint IPCC 2013 100 years). The innovative S-CCHP system is currently in operation in an industrial building located in Zaragoza (Spain), and the transient model developed to estimate the annual energy outputs has been validated. The system consists of hybrid photovoltaic-thermal (PV-T) collectors integrated via two parallel thermal storage tanks with an air-to-water reversible heat pump (rev-HP). Another contribution is that the detailed LCA analysis is also performed to a conventional PV-system and a grid-based system, viz building electricity consumption supplied from the grid (baseline configuration). The results show that the proposed S-CCHP system has half of the environmental impact of the grid-based system, according to the ReCiPe 2016 Endpoint (H/A) and the IPCC GWP 100a methods (4.48 kPts vs 8.87 kPts, and 82.4 tons of CO2 eq vs 166.9 tons of CO2 eq, respectively). The PV-system has 30% less environmental impact than the grid-based system. Another novelty and contribution are the sensitivity analyses performed to assess the influence of the system lifetime, the solar irradiance and the power generation mix (also known as the electricity mix) on the LCA results. The results show that the proposed S-CCHP system appears as an up-and-coming alternative to reduce the environmental impacts of buildings in all the considered solar irradiance levels and electricity mix scenarios, even in climates with low irradiance levels or in countries with a highly decarbonised electricity supply. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Life cycle assessment of a plastic part injected with recycled Polypropylene: a comparison with alternative virgin materials

  • Galve, José Eduardo
  • Elduque, Daniel
  • Pina, Carmelo
  • Javierre, Carlos
Plastics recycling is becoming a common action to reduce our products and processes'' environmental impact, and it is of the utmost importance to introduce circular economy strategies. However, for most of the different types of thermoplastics, recycling is not currently its usual end of life due to the technical difficulties in the sorting and recycling processes. This paper presents the complete life cycle assessment of an industrial component made with three different thermoplastics; two virgin thermoplastics typically used for similar parts in the market as Polyamide 6 and Polypropylene, and an alternative source of 100% recycled Polypropylene. All life cycle stages are included in the study. After carrying out the life cycle inventory, calculations of the environmental impact of each life cycle steps have been performed with ReCiPe 2016 EndPoint (H/A) v1.03/World and with IPCC 2013 GWP 100a v1.03 methodologies, comparing all three materials under the same conditions. A sensibility assessment has also been performed, calculating a worst-case scenario of the recycled material, and considering higher material acquisition distances. This study shows that recycled Polypropylene contributes to reducing the overall environmental impact of the component life cycle by 29.8% under ReCiPe, and by 42.8% under Carbon Footprint when compared to virgin Polypropylene. For the worst-case scenario, these reductions in the environmental impact of the component life cycle are also significant: 23.2% and 36.4%, respectively, showing that the use of recycled polymers is a key approach to reduce the environmental impact of plastic components.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Incorporating composition into life cycle assessment of steel grades

  • García Gutiérrez, Isabel
  • Pina, Carmelo
  • Tobajas, Rafael
  • Elduque, Daniel
Steel is a vital material in modern industries due to its versatility and remarkable properties. In a world that is increasingly concerned about the environment, it is necessary to incorporate good practices that help reduce the environmental impact of our economies. An important aspect is evaluating the environmental impact of materials throughout their life cycle. However, calculating this impact using generic databases can be challenging, as they may lack the necessary specificity. To obtain more accurate environmental impact calculations, it is essential to consider the composition of the materials. Each steel grade, for example, can vary in the content of alloying elements, which influences its environmental impact. Therefore, particularising calculations based on compositions is essential for making informed and sustainable material selection decisions. This article presents a calculation methodology to establish a Life Cycle Inventory of steel, emphasising the specific composition and using datasets of steel production in a Basic Oxygen Furnace (BOF) developed by ecoinvent as reference. The methodology presented seeks to allow the systematic calculation of the environmental impact of any steel considering its composition, contribute to the incorporation of environmental criteria in the selection of materials, and quantify the content of critical raw materials according to the latest report published by the European Union. Likewise, a case study is included, in which the composition's influence on the environmental impact of 10 steel grades widely used in induction cooktops has been analysed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Improvements in Injection Moulds Cooling and Manufacturing Efficiency Achieved by Wire Arc Additive Manufacturing Using Conformal Cooling Concept

  • Marqués, Alejandro
  • Dieste, Jose Antonio
  • Monzón, Iván
  • Laguía, Alberto
  • Gracia, Pascual
  • Javierre, Carlos
  • Clavería, Isabel
  • Elduque, Daniel
The plastic injection moulding industry is a constantly developing industrial field. This industrial process requires the manufacturing of metal moulds using complex heating and cooling systems. The purpose of this research is to optimize both the plastic injection moulding process and the mould manufacturing process itself by combining practices in this industry with current additive manufacturing technologies, specifically Wire Arc Additive Manufacturing (WAAM) technology. A mould punch was manufactured by using both WAAM technology, whose internal cooling system has been designed under the concept of Conformal Cooling, and conventional cooling channel designs and manufacturing techniques in order to carry out a comparative analysis. Theoretical results obtained by CAE methods showed an improvement in heat extraction in the WAAM mould. In addition, the WAAM mould was able to achieve better temperature homogeneity in the final part, minimizing deformations in the final part after extraction. Finally, the WAAM manufacturing process was proven to be more efficient in terms of material consumption than the conventional mould, reducing the buy-to-fly ratio of the part by 5.11.