Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A posteriori error estimation and adaptivity based on VMS for the incompressible Navier–Stokes equations

  • Irisarri, Diego
  • Hauke, Guillermo
In this work an explicit a posteriori error estimator for the steady incompressible Navier–Stokes equations is investigated. The error estimator is based on the variational multiscale theory, where the numerical solution is decomposed in resolved scales (FEM solution) and unresolved scales (FEM error). The error is estimated locally considering the residuals that emerge from the numerical solution and the error inverse-velocity scales, t’s, associated with each type of residual. These error scales are provided in this paper, which have been computed a-priori solving a set of local problems with unit residuals. Therefore, the computational effort to predict the error is small and its implementation in any FEM code is simple. As an application, a strategy to develop adaptive meshes with the aim of optimizing the computational effort is shown. Numerical examples are presented to test the behavior of the error estimator.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

2D experiments and numerical simulation of the oscillatory shallow flow in an open channel lateral cavity

  • Navas-Montilla, A.
  • Martínez-Aranda, S.
  • Lozano, A.
  • García-Palacín, I.
  • García-Navarro, P.
Steady shallow flows past an open channel lateral cavity can induce the excitation of an eigenmode of a gravity standing wave inside the cavity, called seiche, which may be coupled with the shedding of vortices at the opening of the cavity. The presence of the seiche is of fundamental interest as it enhances the mass exchange between the main channel and the cavity. Measurements of the time evolution of the water surface are not often found in the literature for this type of flows. In this work, an experimental and numerical study of a shallow flow past a channel lateral cavity is carried out. The main novelty is the use of a pioneering non-intrusive experimental technique to measure the water surface at the channel-cavity region. This optical technique offers high resolution 2D data in time and space of the water surface evolution, allowing to determine the relevant features of the seiche oscillation. Such data are supplemented with Particle Image Velocimetry measurements. Furthermore, the experiments are numerically reproduced using a high-resolution depth-averaged URANS shallow water model, under the assumption that shallow water turbulence is mainly horizontal. The experimental and numerical results are analyzed in the frequency domain. High-resolution two-dimensional amplitude oscillation maps of the seiche phenomenon, as well as velocity fields, are presented. The high quality of the experimental data reported in this work makes this data set a suitable benchmark for numerical simulation models in order to evaluate their performance in the resolution of turbulent resonant shallow flows.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

An efficient GPU implementation of a coupled overland-sewer hydraulic model with pollutant transport

  • Fernández-Pato, J.
  • García-Navarro, P.
Numerical simulation of flows that consider interaction between overland and drainage networks has become a practical tool to prevent and mitigate flood situations in urban environments, especially when dealing with intense storm events, where the limited capacity of the sewer systems can be a trigger for flooding. Additionally, in order to prevent any kind of pollutant dispersion through the drainage network, it is very interesting to have a certain monitorization or control over the quality of the water that flows in both domains. In this sense, the addition of a pollutant transport component to both surface and sewer hydraulic models would benefit the global analysis of the combined water flow. On the other hand, when considering a realistic large domain with complex topography or streets structure, a fine spatial discretization is mandatory. Hence the number of grid cells is usually very large and, therefore, it is necessary to use parallelization techniques for the calculation, the use of Graphic Processing Units (GPU) being one of the most efficient due to the leveraging of thousands of processors within a single device. In this work, an efficient GPU-based 2D shallow water flow solver (RiverFlow2D-GPU) is fully coupled with EPA’s Storm Water Management Model (SWMM). Both models are able to develop a transient water quality analysis taking into account several pollutants. The coupled model, referred to as RiverFlow2D-GPU UD (Urban Drainge) is applied to three real-world cases, covering the most common hydraulic situations in urban hydrology/hydraulics. A UK Environmental Agency test case is used as model validation, showing a good agreement between RiverFlow2D-GPU UD and the rest of the numerical models considered. The efficiency of the model is proven in two more complex domains, leading to a >100x faster simulations compared with the traditional CPU computation. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Digital 3D inventory for the promotion and conservation of the architectural heritage

  • Quintilla-Castán, M.
  • Martínez-Aranda, S.
  • Agustín-Hernández, L.
Heritage graphic representation combining building spatial location and urban/land planning supports the decision-making of government agencies and simplifies the development of protection and conservation projects. The evolution of web-based open-source representation systems, able to store 3D graphics information and to make it accessible by web platforms, allows to develop novel heritage catalogues which simplify the exchange of information between administrations and citizens. This work is devoted to the creation of the Digital 3D Inventory of the Aragonese Mudéjar Architectural Heritage, a list of 225 buildings with unique architectural elements which are part of the UNESCO World Heritage. We propose a generalized methodology for collecting, store and disseminate friendly 2D geospatial and 3D geometric documentation of the historical buildings, ensuring that valuable information is stored and providing greater graphic and documentary resources than traditional inventories of architectural heritage. The main novelty is creation of a web platform which allows the exploitation of the architectural information through a cartographic webGIS viewer and a 3D environment based on webGL for rendering large point clouds. The proposed web platform enables to delivery 3D content through generic web browsers natively supported by all devices and without installing third-party applications neither downloading massive data files.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Simulation of low-speed buoyant flows with a stabilized compressible/incompressible formulation: the Full Navier–Stokes approach versus the Boussinesq model

  • Hauke, G.
  • Lanzarote, J.
This paper compares two strategies to compute buoyancy-driven flows using stabilized methods. Both formulations are based on a unified approach for solving compressible and incompressible flows, which solves the continuity, momentum, and total energy equations in a coupled entropy-consistent way. The first approach introduces the variable density thermodynamics of the liquid or gas without any artificial buoyancy terms, i.e., without applying any approximate models into the Navier–Stokes equations. Furthermore, this formulation holds for flows driven by high temperature differences. Further advantages of this formulation are seen in the fact that it conserves the total energy and it lacks the incompressibility inconsistencies due to volume changes induced by temperature variations. The second strategy uses the Boussinesq approximation to account for temperature-driven forces. This method models the thermal terms in the momentum equation through a temperature-dependent nonlinear source term. Computer examples show that the thermodynamic approach, which does not introduce any artificial terms into the Navier–Stokes equations, is conceptually simpler and, with the incompressible stabilization matrix, attains similar residual convergence with iteration count to methods based on the Boussinesq approximation. For the Boussinesq model, the SUPG and SGS methods are compared, displaying very similar computational behavior. Finally, the VMS a posteriori error estimator is applied to adapt the mesh, helping to achieve better accuracy for the same number of degrees of freedom.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A GPU-based 2D viscous flow model with variable density and heat exchange

  • Echeverribar, Isabel
  • Martínez-Aranda, Sergio
  • Fernández-Pato, Javier
  • García-Navarro, Pilar
Numerical simulation of unsteady viscous flow over variable topography under the influence of temperature changes is a challenge. In order to apply the model to large domains with complex topography, it becomes mandatory to reduce the model complexity from 3D to 2D by depth averaging the equations and to apply massive parallelization techniques for an efficient simulation. The depth averaged mass continuity, momentum and internal energy equations, combined with suitable friction laws, can be used for this type of flows. Variations in temperature can be accounted for from internal energy changes with density changing accordingly. The resulting system is solved using a finite volume technique on unstructured triangular grids well suited for problems over variable topography. A generic model applicable to a wide range of viscous fluids and validated with synthetic cases is presented to evaluate the performance of the numerical solution in presence of both external thermal forcing functions and discontinuous initial conditions. Finally, the model is applied to a realistic application and calibration to a particular case of lava flow taking into consideration variable density, viscosity and yield stress with temperature . A heat transfer with the air is included to consider the lava cooling. The numerical results of the lava front advance are compared to the Copernicus satellite observations at different dates. The efficiency of the GPU implementation allows to simulate a 11 day event in less than 1.7 h of simulation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A POD-based reduced order model applied to 1D shallow water equations

  • Solán-Fustero, P.
  • Gracia, J. L.
  • Navas-Montilla, A.
  • García-Navarro, P.
Many environmental problems involving free surface flow can be solved using the shallow water equations (SWE) often involving high computational costs due to the large spatial and temporal scales of the events. In recent times, reduced order models (ROM) techniques are increasingly used to improve the computational efficiency of simulation models. The Proper Orthogonal Decomposition (POD) method provides an orthogonal basis for representing a given set of data and constructing the ROM by means of the method of snapshots. In this work, a POD-based intrusive ROM strategy is applied to the 1D SWE. The main goal of this work is to build a simulation model able to reproduce realistic scenarios. We analyse the computational improvement and the accuracy of the ROM results with respect to those of the full-order model (FOM).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The cost overrun of depopulation to improve energy efficiency in buildings: A case study in the Mediterranean Region

  • Herrando, María
  • Chordá, Ramón
  • Gómez, Antonio
  • Fueyo, Norberto
The implementation of energy efficiency measures in public buildings is a complex process that hinges on multiple factors. A factor relevant for some European regions is their ongoing depopulation. In these regions, building energy retrofitting presents additional challenges to those in urban areas, such as over-dimensioned public buildings and low occupancy levels. This work analyses these challenges in the province of Teruel (Spain), one of the regions with the highest depopulation levels in Spain. To this end, a methodology has been developed to assess the effect of depopulation on the cost of upgrading public buildings to improve their energy efficiency. The results show that the investment required per inhabitant for building retrofitting is approximately four times as high in depopulated areas as in urban areas. Furthermore, the low occupancy levels of public buildings can triple the payback time of some energy efficiency measures. To overcome these barriers, in addition to specific policies for depopulated areas, energy planning is essential. An adequate action plan, combining the implementation of energy efficiency measures and the integration of renewable energies in buildings, is the most effective tool to improve the sustainability of public buildings circumventing the barriers created by depopulation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A model for computing thermally-driven shallow flows

  • Echeverribar, I.
  • Martínez-Aranda, S.
  • Fernández-Pato, J.
  • García, R.
  • Brufau, P.
  • García-Navarro, P.
In many natural disasters such as overland oil spills or lava flows, physical fluid properties as density change when considering non-homogeneous spatial and time variable distributions of the temperature. This effect is even more remarkable when these flows show a non-Newtonian behaviour due to the sensitivity of their rheological properties as viscosity or yield stress to temperature. In these cases, temperature becomes a significant variable that drives the fluid behaviour, which must be solved using an energy equation coupled with the free surface flow system. Special attention is devoted to thermal source terms which must include all the heat fluid exchanges, and their modelling sometimes can govern the complete flow behaviour. Fluid density, viscosity and yield stress, also affected by temperature, must be recomputed every time step. Summarizing, this work presents a 2D free surface flow model considering density and temperature variations, which could even modify viscosity and yield stress, with heat transfer mechanisms. The model is applied to oil spill overland simulations and heating/cooling test cases are carried out to ensure the system energy balance. As conclusions, it can be said that the numerical results demonstrate the importance of the heat exchange effects and those of the density, viscosity and yield stress variations.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Experimental validation of a solar system based on hybrid photovoltaic-thermal collectors and a reversible heat pump for the energy provision in non-residential buildings

  • Herrando, M.
  • Coca-Ortegón, A.
  • Guedea, I.
  • Fueyo, N.
This work aims to validate a transient model of a solar hybrid pilot plant based on photovoltaic-thermal (PV-T) collectors integrated via thermal storage tanks with an air-to-water reversible heat pump (rev-HP). The pilot plant is in operation and provides space heating, cooling, domestic hot water (DHW) and electricity to an industrial building located in Zaragoza (Spain). The plant consists of eight uncovered PV-T collectors (2.6 kWe, 13.6 m2), two water tanks and a rev-HP with a nominal thermal power of 16 kW for heating and 10.5 kW for cooling. The validation results show that the transient model fits the experimental performance of the PV-T collectors, with an average error of -16% and 3%, for the thermal and electrical generation respectively. The accuracy of the estimated rev-HP performance depends on the operation mode. The estimated COP in cooling mode has an average error of 14%, while in heating mode has an average error of -10%. The results show that the integration of the thermal and electrical generation of the PV-T collectors with a high-performance rev-HP allows the solar PV-T system to be self-sufficient to satisfy the building energy demand.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Development of POD-based Reduced Order Models applied to shallow water equations using augmented Riemann solvers

  • Solán-Fustero, P.
  • Gracia, J.L.
  • Navas-Montilla, A.
  • García-Navarro, P.
Reduced-order models (ROMs) based on the proper orthogonal decomposition have been proposed to reduce the computational resources required by the full-order models (FOMs) to approximate partial differential equations. In this paper a Roe-based ROM is developed to solve the shallow water equations in presence of source terms more efficiently than the Roe-based FOM. The well-balanced property and other numerical corrections such as the entropy fix and the wet–dry treatment are taken into account using augmented Riemann solvers to build the Roe-based FOM. In addition to this, a time averaging approach is necessary to develop the Roe-based ROM. This approach is validated by solving some cases and the computed solutions are compared with those ones of Lax–Friedrichs-based ROMs. It is also studied whether the ROM preserves or not the well-balancing, the entropy fix and the wet–dry treatment.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A family of well-balanced WENO and TENO schemes for atmospheric flows

  • Navas-Montilla, A.
  • Echeverribar, I.
We herein present a novel methodology to construct very high order well-balanced schemes for the computation of the Euler equations with gravitational source term, with application to numerical weather prediction (NWP). The proposed method is based on augmented Riemann solvers, which allow preserving the exact equilibrium between fluxes and source terms at cell interfaces. In particular, the augmented HLL solver (HLLS) is considered. Different spatial reconstruction methods can be used to ensure a high order of accuracy in space (e.g. WENO, TENO, linear reconstruction), being the TENO reconstruction the preferred method in this work. To the knowledge of the authors, the TENO method has not been applied to NWP before, although it has been extensively used by the computational fluid dynamics community in recent years. Therefore, we offer a thorough assessment of the TENO method to evidence its suitability for NWP considering some benchmark cases which involve inertia and gravity waves as well as convective processes. The TENO method offers an enhanced behavior when dealing with turbulent flows and underresolved solutions, where the traditional WENO scheme proves to be more diffusive. The proposed methodology, based on the HLLS solver in combination with a very high-order discretization, allows carrying out the simulation of meso- and micro-scale atmospheric flows in an implicit Large Eddy Simulation manner. Due to the HLLS solver, the isothermal, adiabatic and constant Brunt-Väisälä frequency hydrostatic equilibrium states are preserved with machine accuracy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Numerical coupling of 0D and 1D models in networks of vessels including transonic flow conditions. Application to short-term transient and stationary hemodynamic simulation of postural changes

  • Murillo, Javier
  • García-Navarro, Pilar
When modeling complex fluid networks using one‐dimensional (1D) approaches, boundary conditions can be imposed using zero‐dimensional (0D) models. An application case is the modeling of the entire human circulation using closed‐loop models. These models can be considered as a tool to investigate short‐term transient and stationary hemodynamic responses to postural changes. The first shortcoming of existing 1D modeling methods in simulating these sudden maneuvers is their inability to deal with rapid variations in flow conditions, as they are limited to the subsonic case. On the other hand, numerical modeling of 0D models representing microvascular beds, venous valves or heart chambers is also currently modeled assuming subsonic flow conditions in 1D connecting vessels, failing when transonic and supersonic flow conditions appear. Therefore, if numerical simulation of sudden maneuvers is a goal in closed‐loop models, it is necessary to reformulate the current methodologies used when coupling 0D and 1D models, allowing the correct handling of flow evolution for both subsonic and transonic conditions. This work focuses on the extension of the general methodology for the Junction Riemann Problem (JRP) when coupling 0D and 1D models. As an example of application, the short‐term transient response to head‐up tilt (HUT) from supine to upright position of a closed‐loop model is shown, demonstrating the potential, capability and necessity of the presented numerical models when dealing with sudden maneuvers.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The entropy fix in augmented Riemann solvers in presence of source terms: Application to the Shallow Water Equations

  • Mairal, Juan
  • Murillo, Javier
  • García-Navarro, Pilar
Extensions to the Roe and HLL method have been previously formulated in order to solve the Shallow Water equations in the presence of source terms. These were named the Augmented Roe (ARoe) method and the HLLS method, respectively. This paper continues developing these formulations by examining how entropy corrections can be appropriately fitted in for the ARoe method and how the HLLS method can be formulated more generally. This is done in two ways. Firstly, this paper extends the reasoning of Harten and Hyman required by the ARoe method to include the source term contributions and thus arrives to a more complete formulation of the entropy fix, which will be compared with the approximation presented in previous works through numerical experiments. Secondly, it is shown how a relaxation of the criteria used when choosing waves in the HLLS method yields better solutions to problems where the HLLS would previously fail. In summary, this paper seeks to offer a comprehensible review of the ARoe and HLLS methods while improving its performance in cases with transcritical rarefactions for the inhomogeneous Shallow Water Equations in one dimension.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Life Cycle Assessment of solar energy systems for the provision of heating, cooling and electricity in buildings: A comparative analysis

  • Herrando, María
  • Elduque, Daniel
  • Javierre, Carlos
  • Fueyo, Norberto
A detailed Life Cycle Assessment (LCA) “from cradle to grave” is performed to a solar combined cooling, heating and power (S-CCHP) system that provides space heating, cooling, domestic hot water and electricity, following two different methodologies (the ReCiPe 2016 Endpoint (H/A) v1.03 and the carbon footprint IPCC 2013 100 years). The innovative S-CCHP system is currently in operation in an industrial building located in Zaragoza (Spain), and the transient model developed to estimate the annual energy outputs has been validated. The system consists of hybrid photovoltaic-thermal (PV-T) collectors integrated via two parallel thermal storage tanks with an air-to-water reversible heat pump (rev-HP). Another contribution is that the detailed LCA analysis is also performed to a conventional PV-system and a grid-based system, viz building electricity consumption supplied from the grid (baseline configuration). The results show that the proposed S-CCHP system has half of the environmental impact of the grid-based system, according to the ReCiPe 2016 Endpoint (H/A) and the IPCC GWP 100a methods (4.48 kPts vs 8.87 kPts, and 82.4 tons of CO2 eq vs 166.9 tons of CO2 eq, respectively). The PV-system has 30% less environmental impact than the grid-based system. Another novelty and contribution are the sensitivity analyses performed to assess the influence of the system lifetime, the solar irradiance and the power generation mix (also known as the electricity mix) on the LCA results. The results show that the proposed S-CCHP system appears as an up-and-coming alternative to reduce the environmental impacts of buildings in all the considered solar irradiance levels and electricity mix scenarios, even in climates with low irradiance levels or in countries with a highly decarbonised electricity supply. © 2022 The Authors
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

A review of VMS a posteriori error estimation with emphasis in fluid mechanics

  • Hauke, Guillermo
  • Irisarri, Diego
This article outlines the research on the application of the variational multiscale theory (VMS) to a posteriori error estimation. VMS theory was initially developed by Professor Hughes to evince the origins of stabilized methods. In this paper it is shown that the stabilization parameters and the stabilization terms contain true error information that can be used to obtain explicit and implicit a posteriori error estimates. The technology consists of splitting the exact solution into resolved or coarse scales (finite element solution) and unresolved or fine scales (numerical error). By feeding this splitting into the variational formulation, an exact weak form can be derived for the fine scales as a function of the resolved scales. The way of solving or approximating this equation yields different algorithms and models for error estimation. Furthermore, using the so-called fine-scale Green’s function, an analytical representation of the fine scales is possible. Again, different approximations of this function give rise to various algorithms and models. This theory naturally suggests that the error can be computed by the combination of element interior and inter-element faces residuals with the corresponding error time-scales. From this standpoint, error estimators are developed for the transport equation and the Navier–Stokes equations. This technology can be further used for example to generate adapted meshes, to derive reduced order models and in verification and validation algorithms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Benchmark of computational hydraulics models for open-channel flow with lateral cavities

  • Ouro, Pablo
  • Cea, Luis
  • Croquer, Sergio
  • Dong, Wenhao
  • Garcia-Feal, Orlando
  • Navas-Montilla, Adrián
  • Rogers, Benedict D.
  • Uchida, Tatsuhiko
  • Juez, Carmelo
Computational models in hydro-environmental engineering are diverse in their background formulation and span from two-dimensional depth-averaged shallow water models, to complex fully three-dimensional turbulence models resolving large-eddy simulation with surface capturing techniques, and to Lagrangian particle-based methods. This paper presents a first-of-its-kind comparison of six different computational hydraulics fluid dynamics models, namely Iber+, HO-SWM, GBVC, OpenFOAM (RANS), Hydro3D (LES) and DualSPHysics (SPH), in the prediction of mean velocities and free-surface dynamics in two benchmarks involving open-channel flows with symmetric lateral cavities. Results show that shallow-water models capture relatively well the main large-scale coherent structures of the in-cavity flow, with wider shear layers compared to three-dimensional models, and higher velocities in the main channel. Three-dimensional RANS, LES and SPH yield improved predictions of mean velocities compared with experimental data. Computational cost has been quantified for all models with a logarithmic growth when increasing model complexity. The transverse standing wave is captured by most models, with the shallow-water ones matching the theoretical value, while the three-dimensional models overestimate it slightly.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Application of approximate dispersion-diffusion analyses to under-resolved Burgers turbulence using high resolution WENO and UWC schemes

  • Solán-Fustero, P.
  • Navas-Montilla, A.
  • Ferrer, E.
  • Manzanero, J.
  • García-Navarro, P.
This paper presents a space-time approximate diffusion-dispersion analysis of high-order, finite volume Upwind Central (UWC) and Weighted Essentially Non-Oscillatory (WENO) schemes. We perform a thorough study of the numerical errors to find a-priori guidelines for the computation of under-resolved turbulent flows. In particular, we study the 3-rd, 5-th and 7-th order UWC and WENO reconstructions in space, and 3-rd and 4-th order Runge-Kutta time integrators. To do so, we use the approximate von Neumann analysis for non-linear schemes introduced by Pirozzoli. Moreover, we apply the “1% rule” for the dispersion-diffusion curves proposed by Moura et al. [41] to determine the range of wavenumbers that are accurately resolved by each scheme. The dispersion-diffusion errors estimated from these analyses agree with the numerical results for the forced Burgers'' turbulence problem, which we use as a benchmark. The cut-off wavenumbers defined by the “1% rule” are evidenced to serve as a good estimator of the beginning of the dissipation region of the energy cascade and they are shown to be associated to a similar level of dissipation, with independence of the scheme. Finally, we show that WENO schemes are more diffusive than UWC schemes, leading to stable simulations at the price of more dissipative results. It is concluded both UWC and WENO schemes may be suitable schemes for iLES turbulence modeling, given their numerical dissipation level acting at the appropriate wavenumbers.