Skip to main content

DIAMANTE PARA DISPOSITIVOS DE POTENCIA

TEC2009-11399

•
Funding agency name Ministerio de Ciencia e Innovación
Funding agency acronym MICINN
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2009
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Subdirección General de Proyectos de Investigación
Beneficiary centre UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Otros (Other)

TEM study of defects versus growth orientations in heavily boron-doped diamond

  • Lloret Vieira, Fernando Manuel
  • Araújo Gay, Daniel
  • Alegre Salguero, María de la Paz
  • González Leal, Juan María
  • Villar Castro, María del Pilar
  • Eon, David
  • Bustarret, Etienne
Heavy boron-doping layer in diamond can be responsible for the generation of extended defects during the growth processes (Blank et al., Diam. Relat. Mater. 17, 1840 (2008)). As claimed recently (Alegre et al., Appl. Phys. Lett. 105, 173103 (2014)), boron pair interactions rather than strain-related misfit seems to be responsible for such dislocation generation. In the present work, electron microscopy observations are used to study the defects induced by heavy boron doping in different growth plane orientations. Facets of pyramidal Hillocks (PHs) and pits provide access to non-conventional growth orientations where boron atoms incorporation is different during growth. TEM analysis on FIB prepared lamellas confirm that also for those growth orientations, the generation of dislocations occurs within the heavily boron-doped diamond layers. Stacking faults (SFs) have been also observed by high resolution transmission electron microscopy (HREM). From the invisibility criteria, using weak beam (WB) observation, 1/2[110] and 1/6[112], Burgers vectors have been identified. Their generation behavior confirms the mechanism reported by Alegre et al. where local in-plane strain effects induced at the growing surface of the diamond lattice by the neighboring of several boron atoms cause the generation of such extended defects.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Atomic composition of WC/ and Zr/O-terminated diamond Schottky interfaces close to ideality

  • Piñero Charlo, José Carlos
  • Araújo Gay, Daniel
  • Fiori, Alexandre
  • Traoré, A
  • Villar Castro, María del Pilar
  • Eon, David
  • Muret, Pierre
  • Pernot, Julien
  • Teraji, Tokuyuki
Electrical and nano-structural properties of Zr and WC-based Schottky power diodes are compared andused for investigating oxide-related effects at the diamond/metal interface. Differences in Schottky bar-rier heights and ideality factors of both structures are shown to be related with the modification of theoxygen-terminated diamond/metal interface configuration. Oxide formation, oxide thickness variationsand interfacial oxygen redistribution, associated with thermal treatment are demonstrated. Ideality fac-tors close to ideality (nWC= 1.02 and nZr= 1.16) are obtained after thermal treatment and are shown to berelated with the relative oxygen content at the surface (OCRWC= 3.03 and OCRZr= 1.5). Indeed, thermaltreatment at higher temperatures is shown to promote an escape of oxygen for the case of the WC diode,while it generates a sharper accumulation of oxygen at the metal/diamond interface for the case of Zrdiode. Therefore, the metal-oxygen affinity is shown to be a key parameter to improve diamond-basedSchottky diodes., This work was made possible through grants from theSpanishMinistry of Economy and Competitiveness (ref: TEC2014-54357-C2-2-R, HiVolt-nano project) and from the European H2020Program (ref: SEP-210184415, Green Diamond project). Theauthors also wish to thank “Ministerio de Ciencia e Innovación” forthe grants BES-2010-039524 and EEBB-I-13-07696 of the projectTEC2009-11399.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Diamond as substrate for 3C-SiC growth: A TEM study

  • Lloret Vieira, Fernando Manuel
  • Piñero Charlo, José Carlos
  • Villar Castro, María del Pilar
  • Gheeraert, Etienne
  • Vo-Ha, A.
  • Soulière, Veronique
  • Rebaud, M
  • Carole, Davy
  • Ferro, Gabriel
Vapor–liquid–solid (V–L–S) growth of SiC on (100) diamond substrate is reported. The crystalline quality is evaluated by transmission electron microscopy (TEM). Diffraction contrast (CTEM) observations allowed confirming the growth of fully lattice relaxed SiC 3C-type crystalline structure. Defects as dislocations at the diamond/SiC interface and stacking faults, in the thick SiC layer are revealed by high resolution TEM and CTEM. From the invisibility criteria, using dark field observations, 〈110〉 type Burger vector are identified.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

High resolution boron content profilometry at δ-doping epitaxial diamond interfaces by CTEM

  • Piñero Charlo, José Carlos
  • Lloret Vieira, Fernando Manuel
  • Alegre Salguero, María de la Paz
  • Villar Castro, María del Pilar
  • Fiori, Alexandre
  • Bustarret, Etienne
  • Araújo Gay, Daniel
Ultimate spatial resolution in boron δ-doped homoepitaxial diamond interfaces has been achieved by diffraction contrast technique in Transmission Electron Microscopy. The combination of two reflections with the Howie-Whelan equations allows profiling the boron content of δ-doped diamond homoepitaxial layers by fitting experimentally measured CTEM intensities with the theoretical ones. To validate the method, the obtained doping profiles are compared with that of secondary ion mass spectrometry, obtaining a boron concentration of 1.6·1021 at/cm−3, which is in good agreement with that of SIMS. This approach is capable to perform dopant concentration quantification in a non-destructive way, and provides the possibility of nanometric resolution dopant concentration mapping by TEM
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Twins and strain relaxation in zinc-blende GaAs nanowires grown on silicon

  • Piñero Charlo, José Carlos
  • Araújo Gay, Daniel
  • Enzo Pastore, Carlo
  • Gutiérrez Peinado, Marina
  • Frigeri, Cesare
  • Benali, Ahmad
  • Lelièvre, Jean François
  • Gendry, M.
tTo integrate materials with large lattice mismatch as GaAs on silicon (Si) substrate, one possible approach,to improve the GaAs crystalline quality, is to use nanowires (NWs) technology. In the present contribution,NWs are grown on 111 oriented Si substrates by molecular beam epitaxy (MBE) using vapor-liquid-solid (VLS) method. Transmission electron microscopy (TEM) analyses show that NWs are mainly grownalternating wurtzite and zinc blend (ZB) phases, and only few are purely ZB. On the latter, High ResolutionElectron Microscopy (HREM) evidences the presence of twins near the surface of the NW showing limitedconcordance with the calculations of Yuan (2013) [1], where {111} twin planes in a 111 oriented GaAsNW attain attractive interactions mediated by surface strain. In addition, such twins allow slight strainrelaxation and are probably induced by the local huge elastic strain observed by HREM in the latticebetween the twin and the surface. The latter is attributed to some slight bending of the NW as shown bythe inversion of the strain from one side to the other side of the NW.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Diamond underlayer microstructure effect on the orientation of AlN piezoelectric layers for high frequency SAW resonators by TEM

  • Lloret Vieira, Fernando Manuel
  • Araújo Gay, Daniel
  • Villar Castro, María del Pilar
  • Rodriguez Madrid, Juan Gabriel
  • Iriarte, Gonzalo F
  • Williams, Oliver Aneurin
  • Calle, Fernando
Due to its mechanical properties, diamond is very attractive as an active material for the fabrication of SAW resonators for high frequency applications. In this work, the synthesis of piezoelectric AlN films by reactive sputtering at room temperature has been optimized on thick diamond layers grown on Si and alumina substrates in order to process high frequency devices. The effect of diamond underlayer microstructure is evaluated by TEM. Two sets of samples are studied, AlN/NCD/Alumina and AlN/MCD/Si. The orientation of the AlN grains is shown to improve with the film thickness and the diamond grain size. For NCD underlayer, the AlN deposited on top is more oriented. Moreover, above 1 μm from the AlN/diamond interface, a high degree of the c-axis orientation (perpendicular to the AlN/diamond interface) is demonstrated even though two different grain lattice orientations are shown to coexist: one with the (21̄1̄0) planes remaining parallel to the TEM-preparation lamella and the other with (011̄0) planes. The AlN/diamond interface is smooth down to the nm-scale.