Skip to main content

DISPOSITIVO DE ALTO VOLTAJE PARA ELECTRONICA DE POTENCIA VERDE: RELACION NANOESTRUCTURA-FUNCION

TEC2014-54357-C2-2-R

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2014
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Management unit Secretaría de Estado de Educación, Formación Profesional y Universidades
Beneficiary centre UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Otros (Other)

TEM study of defects versus growth orientations in heavily boron-doped diamond

  • Lloret Vieira, Fernando Manuel
  • Araújo Gay, Daniel
  • Alegre Salguero, María de la Paz
  • González Leal, Juan María
  • Villar Castro, María del Pilar
  • Eon, David
  • Bustarret, Etienne
Heavy boron-doping layer in diamond can be responsible for the generation of extended defects during the growth processes (Blank et al., Diam. Relat. Mater. 17, 1840 (2008)). As claimed recently (Alegre et al., Appl. Phys. Lett. 105, 173103 (2014)), boron pair interactions rather than strain-related misfit seems to be responsible for such dislocation generation. In the present work, electron microscopy observations are used to study the defects induced by heavy boron doping in different growth plane orientations. Facets of pyramidal Hillocks (PHs) and pits provide access to non-conventional growth orientations where boron atoms incorporation is different during growth. TEM analysis on FIB prepared lamellas confirm that also for those growth orientations, the generation of dislocations occurs within the heavily boron-doped diamond layers. Stacking faults (SFs) have been also observed by high resolution transmission electron microscopy (HREM). From the invisibility criteria, using weak beam (WB) observation, 1/2[110] and 1/6[112], Burgers vectors have been identified. Their generation behavior confirms the mechanism reported by Alegre et al. where local in-plane strain effects induced at the growing surface of the diamond lattice by the neighboring of several boron atoms cause the generation of such extended defects.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Stratigraphy of a diamond epitaxial three-dimensional overgrowth using doping superlattices

  • Lloret Vieira, Fernando Manuel
  • Fiori, Alexandre
  • Araújo Gay, Daniel
  • Eon, David
  • Villar Castro, María del Pilar
  • Bustarret, Etienne
The selective doped overgrowth of 3D mesa patterns and trenches has become an essential fabrication step of advanced monolithic diamond-based power devices. The methodology here proposed combines the overgrowth of plasma-etched cylindrical mesa structures with the sequential growth of doping superlattices. The latter involve thin heavily boron doped epilayers separating thicker undoped epilayers in a periodic fashion. Besides the classical shape analysis under the scanning electron microscope relying on the appearance of facets corresponding to the main crystallographic directions and their evolution toward slow growing facets, the doping superlattices were used as markers in oriented cross-sectional lamellas prepared by focused ion beam and observed by transmission electron microscopy. This stratigraphic approach is shown here to be applicable to overgrown structures where faceting was not detectable. Intermediate growth directions were detected at different times of the growth process and the periodicity of the superlattice allowed to calculate the growth rates and parameters, providing an original insight into the planarization mechanism. Different configurations of the growth front were obtained for different sample orientations, illustrating the anisotropy of the 3D growth. Dislocations were also observed along the lateral growth fronts with two types of Burger vector: b 01 1 = 1 2 [01 1 ] and b 112 = 1 6 [112]. Moreover, the clustering of these extended defects in specific regions of the overgrowth prompted a proposal of two different dislocation generation mechanisms.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Control of the alumina microstructure to reduce gate leaks in diamond MOSFETs

  • Gutiérrez Peinado, Marina
  • Lloret Vieira, Fernando Manuel
  • Thanh-Toan, Pham
  • Cañas, Jesus
  • Fernández de los Reyes, Daniel
  • Eon, David
  • Pernot, Julien
  • Araújo Gay, Daniel
In contrast to Si technology, amorphous alumina cannot act as a barrier for a carrier at diamond MOSFET gates due to their comparable bandgap. Indeed, gate leaks are generally observed in diamond/alumina gates. A control of the alumina crystallinity and its lattice matching to diamond is here demonstrated to avoid such leaks. Transmission electron microscopy analysis shows that high temperature atomic layer deposition, followed by annealing, generates monocrystalline reconstruction of the gate layer with an optimum lattice orientation with respect to the underneath diamond lattice. Despite the generation of γ-alumina, such lattice control is shown to prohibit the carrier transfer at interfaces and across the oxide.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Atomic composition of WC/ and Zr/O-terminated diamond Schottky interfaces close to ideality

  • Piñero Charlo, José Carlos
  • Araújo Gay, Daniel
  • Fiori, Alexandre
  • Traoré, A
  • Villar Castro, María del Pilar
  • Eon, David
  • Muret, Pierre
  • Pernot, Julien
  • Teraji, Tokuyuki
Electrical and nano-structural properties of Zr and WC-based Schottky power diodes are compared andused for investigating oxide-related effects at the diamond/metal interface. Differences in Schottky bar-rier heights and ideality factors of both structures are shown to be related with the modification of theoxygen-terminated diamond/metal interface configuration. Oxide formation, oxide thickness variationsand interfacial oxygen redistribution, associated with thermal treatment are demonstrated. Ideality fac-tors close to ideality (nWC= 1.02 and nZr= 1.16) are obtained after thermal treatment and are shown to berelated with the relative oxygen content at the surface (OCRWC= 3.03 and OCRZr= 1.5). Indeed, thermaltreatment at higher temperatures is shown to promote an escape of oxygen for the case of the WC diode,while it generates a sharper accumulation of oxygen at the metal/diamond interface for the case of Zrdiode. Therefore, the metal-oxygen affinity is shown to be a key parameter to improve diamond-basedSchottky diodes., This work was made possible through grants from theSpanishMinistry of Economy and Competitiveness (ref: TEC2014-54357-C2-2-R, HiVolt-nano project) and from the European H2020Program (ref: SEP-210184415, Green Diamond project). Theauthors also wish to thank “Ministerio de Ciencia e Innovación” forthe grants BES-2010-039524 and EEBB-I-13-07696 of the projectTEC2009-11399.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Determination of alumina bandgap and dielectric functions of diamond MOS by STEM-VEELS

  • Cañas Fernández, Jesús
  • Piñero Charlo, José Carlos
  • Lloret Vieira, Fernando Manuel
  • Gutiérrez Peinado, Marina
  • Pham, Thu-Nhi
  • Pernot, Julien
  • Araújo Gay, Daniel
Alumina is a promising candidate for fabricating the gate of diamond metal oxide semiconductor field effect transistor (MOSFET) due to its outstanding nominal properties: A high gap of 8.8 eV and a high static dielectric constant of 9. However, such properties are strongly dependent on the synthesis. As gate oxides are usually very thin layers (5–50 nm), investigating its properties is not straightforward. Electron energy loss spectroscopy in scanning transmission electron microscopy (STEM-EELS) methodology is reported in the nm-scale range. Monochromatic 60 keV electron beam is used to obtain the low energy loss spectrum in order to allow an accurate zero loss peak deconvolution and to avoid Cherenkov effect. The low energy loss spectrum is used to extract the bandgap along diamond-alumina interface and to perform Kramers-Kronig analysis to obtain the complex dielectric function of the Al2O3. High resolution electron microscopy (HREM) and STEM-EELS investigations show that the oxide phase of our sample is γ alumina. Its measured bandgap is 6.8 eV and the dielectric functions yield a value of 3 for the high frequency dielectric constant
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

High resolution boron content profilometry at δ-doping epitaxial diamond interfaces by CTEM

  • Piñero Charlo, José Carlos
  • Lloret Vieira, Fernando Manuel
  • Alegre Salguero, María de la Paz
  • Villar Castro, María del Pilar
  • Fiori, Alexandre
  • Bustarret, Etienne
  • Araújo Gay, Daniel
Ultimate spatial resolution in boron δ-doped homoepitaxial diamond interfaces has been achieved by diffraction contrast technique in Transmission Electron Microscopy. The combination of two reflections with the Howie-Whelan equations allows profiling the boron content of δ-doped diamond homoepitaxial layers by fitting experimentally measured CTEM intensities with the theoretical ones. To validate the method, the obtained doping profiles are compared with that of secondary ion mass spectrometry, obtaining a boron concentration of 1.6·1021 at/cm−3, which is in good agreement with that of SIMS. This approach is capable to perform dopant concentration quantification in a non-destructive way, and provides the possibility of nanometric resolution dopant concentration mapping by TEM
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Twins and strain relaxation in zinc-blende GaAs nanowires grown on silicon

  • Piñero Charlo, José Carlos
  • Araújo Gay, Daniel
  • Enzo Pastore, Carlo
  • Gutiérrez Peinado, Marina
  • Frigeri, Cesare
  • Benali, Ahmad
  • Lelièvre, Jean François
  • Gendry, M.
tTo integrate materials with large lattice mismatch as GaAs on silicon (Si) substrate, one possible approach,to improve the GaAs crystalline quality, is to use nanowires (NWs) technology. In the present contribution,NWs are grown on 111 oriented Si substrates by molecular beam epitaxy (MBE) using vapor-liquid-solid (VLS) method. Transmission electron microscopy (TEM) analyses show that NWs are mainly grownalternating wurtzite and zinc blend (ZB) phases, and only few are purely ZB. On the latter, High ResolutionElectron Microscopy (HREM) evidences the presence of twins near the surface of the NW showing limitedconcordance with the calculations of Yuan (2013) [1], where {111} twin planes in a 111 oriented GaAsNW attain attractive interactions mediated by surface strain. In addition, such twins allow slight strainrelaxation and are probably induced by the local huge elastic strain observed by HREM in the latticebetween the twin and the surface. The latter is attributed to some slight bending of the NW as shown bythe inversion of the strain from one side to the other side of the NW.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

MPCVD Diamond Lateral Growth Through Microterraces to Reduce Threading Dislocations Density

  • Lloret Vieira, Fernando Manuel
  • Gutiérrez Peinado, Marina
  • Araújo Gay, Daniel
  • Eon, David
  • Bustarret, Etienne
Diamond lateral growth is a useful technique to assess 3D architectures of devices. The requirement of the overgrowth on etched substrates has been observed to have additional benefit in the crystallinity of the diamond. The surface roughness is enhanced and threading dislocation density is reduced as a consequence of the lateral growth on patterned substrates. Under these premises, this contribution presents a study of defects and terrace coalescences for the lateral growth on a trenched surface substrates with different trench widths. The latter was achieved on 100-oriented HPHT diamond substrates grown by MPCVD and using very thin-doped layers to mark the growth plane every 100 nm. The results showed high density of threading dislocations that were gathered to the centre of the coalescence. These threading dislocations, as well as planar defects, were investigated using transmission electron microscopy. The mechanism of those defects generation and the better conditions to achieve defect-free areas are discussed.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Three-Dimensional Diamond MPCVD Growth over MESA Structures: A Geometric Model for Growth Sector Configuration

  • Lloret Vieira, Fernando Manuel
  • Araújo Gay, Daniel
  • Eon, David
  • Bustarret, Etienne
The overgrowth of {100}-oriented patterned diamond substrates by microwave plasma enhanced chemical vapor deposition was studied by transmission electron microscopy through a stratigraphic approach. A sector-like growth behavior is evidenced, resulting from a competition between slowly growing facets at protruding (top) corners and edges against quickly growing facets at recessing (bottom) corners. Depending on the pattern orientation and height, under some particular experimental conditions, it is possible to predict the sequence of growth sectors, and thus to choose the crystallographic orientation of the overgrown surface, by stopping the growth at the right stage. A simple two-dimensional model is provided, allowing the fabrication of structures adapted to the requirements of specific electronic devices.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Crystalline defects induced during MPCVD lateral homoepitaxial diamond growth

  • Lloret Vieira, Fernando Manuel
  • Eon, David
  • Bustarret, Etienne
  • Araújo Gay, Daniel
The development of new power devices taking full advantage of the potential of diamond has prompted the design of innovative 3D structures. This implies the overgrowth towards various crystallographic orientations. To understand the consequences of such growth geometries on the defects generation, a Transmission Electron Microscopy (TEM) study of overgrown, mesa-patterned, homoepitaxial, microwave-plasma-enhanced, chemical vapor deposition (MPCVD) diamond is presented. Samples have been grown under quite different conditions of doping and methane concentration in order to identify and distinguish the factors involved in the defects generation. TEM is used to reveal threading dislocations and planar defects. Sources of dislocation generation have been evidenced: (i) doping level versus growth plane, and (ii) methane concentration. The first source of dislocations was shown to generate <110> Burgers vector dislocations above a critical boron concentration, while the second induces <112> type Burgers vector above a critical methane/hydrogen molar ratio. The latter is attributed to partial dislocations whose origin is related to the dissociation of perfect ones by a Shockley process. This dissociation generated stacking faults that likely resulted in penetration twins, which were also observed on these samples. Lateral growth performed at low methane and boron content did not exhibit any dislocation.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Boron-doping proximity effects on dislocation generation during non-planar MPCVD homoepitaxial diamond growth

  • Lloret Vieira, Fernando Manuel
  • Eon, David
  • Bustarret, Etienne
  • Fiori, Alexandre
  • Araújo Gay, Daniel
Epitaxial lateral growth will be required if complex diamond-based device architecture, such as, for example, Metal-oxide-semiconductor Field-effect transistors (MOSFETs) or epitaxial lateral overgrowth (ELO) substrates, need to be developed for high-power applications. To this end, undoped and doped non-planar homoepitaxial diamond were overgrown on (001)-oriented diamond-patterned substrates. Defects induced by both the heavy boron doping and three-dimensional (3D) growth were studied by transmission electron microscopy (TEM). At high methane and boron concentrations, threading dislocations with Burgers vectors b = 1/6 〈211〉, b = 1/2 〈110〉, or both were observed. Their generation mechanisms were established, revealing boron proximity effects as precursors of dislocations generated in boron-doped samples and providing clues as to the different Burgers vectors. The concentration ranges of boron and methane resulting in good crystalline quality depended on the plane of growth. The microwave plasma-enhanced chemical vapour deposition (MPCVD) growth conditions and the maximum boron concentration versus plane orientation yielding a dislocation-free diamond epitaxial layer were determined
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Influence of methane concentration on MPCVD overgrowth of 100-oriented etched diamond substrates

  • Lloret Vieira, Fernando Manuel
  • Araújo Gay, Daniel
  • Eon, David
  • Villar Castro, María del Pilar
  • González Leal, Juan María
  • Bustarret, Etienne
Selective diamond growth on etched diamond substrates allows the development of 3D-type device geometries, which can make possible higher capacity, higher surface for contacts and benefits from better properties versus growth orientation. Such structures need the control of lateral growth or lateral etching that guarantee the best epitaxial growth, with a well-faceted surface, with a minimum density of emerging defects in order to limit the current leakage and to improve the breakdown voltage. Previous works used 111-oriented selective growth on etched diamond for lateral p–n junctions or bipolar junction transistors. The behavior of homoepitaxial overgrowth on etched diamond substrates depends directly on growth parameters such as temperature, gas concentration or microwave power that can favor the growth in one specific direction. The present contribution considers the effect of methane concentration during the overgrowth of the mesa pattern. The presence of highly doped intermediate layers allowed following the growth plane orientation in a stratigraphic approach. Faceting and growth velocities were analyzed using scanning and transmission electron microscopes (SEM and TEM).