Skip to main content

ARCHITECTURA 3D DE MOSFET ELABORADAS IN-SITU POR MPCVD PARA ELECTRONICA DE POTENCIA

TEC2017-86347-C2-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Study of Early Stages in the Growth of Boron-Doped Diamond on Carbon Fibers

  • Millán Barba, Josué
  • Gutiérrez Peinado, Marina
  • Lloret Vieira, Fernando Manuel
  • Guzmán de Villoria, Roberto
  • Alcántara Puerto, Rodrigo
  • Haenen, Ken
  • Araújo Gay, Daniel
With the aim to improve the properties of aeronautical carbon fiber (CF)-reinforced polymer materials, boron-doped diamond (BDD) has been grown on commercial CFs by microwave plasma-enhanced chemical vapor deposition. The growth of a BDD layer on CF is expected to increase the mechanical, electrical, and thermal conductivities of the composite. The present contribution reports the different growth stages and their associated nanostructures of the BDD/CF resulting system using transmission electron microscopy, scanning electron microscopy, and Raman spectroscopy. The revealed carbon nanostructure shows four steps of growth with the following characteristics: 1) transitional interlayer, 2) graphite nanowall, 3) cauliflower-like nanocrystalline diamond, and 4) microcrystalline diamond.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Control of the alumina microstructure to reduce gate leaks in diamond MOSFETs

  • Gutiérrez Peinado, Marina
  • Lloret Vieira, Fernando Manuel
  • Thanh-Toan, Pham
  • Cañas, Jesus
  • Fernández de los Reyes, Daniel
  • Eon, David
  • Pernot, Julien
  • Araújo Gay, Daniel
In contrast to Si technology, amorphous alumina cannot act as a barrier for a carrier at diamond MOSFET gates due to their comparable bandgap. Indeed, gate leaks are generally observed in diamond/alumina gates. A control of the alumina crystallinity and its lattice matching to diamond is here demonstrated to avoid such leaks. Transmission electron microscopy analysis shows that high temperature atomic layer deposition, followed by annealing, generates monocrystalline reconstruction of the gate layer with an optimum lattice orientation with respect to the underneath diamond lattice. Despite the generation of γ-alumina, such lattice control is shown to prohibit the carrier transfer at interfaces and across the oxide.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Industrial Steel Heat Treating: Numerical Simulation of Induction Heating and Aquaquenching Cooling with Mechanical Effects

  • Díaz Moreno, José Manuel
  • García Vázquez, Concepción
  • González Montesinos, María Teresa
  • Ortegón Gallego, Francisco
  • Viglialoro, Giuseppe
This paper summarizes a mathematical model for the industrial heating and cooling processes of a steel workpiece corresponding to the steering rack of an automobile. The general purpose of the heat treatment process is to create the necessary hardness on critical parts of the workpiece. Hardening consists of heating the workpiece up to a threshold temperature followed by a rapid cooling such as aquaquenching. The high hardness is due to the steel phase transformation accompanying the rapid cooling resulting in non-equilibrium phases, one of which is the hard microconstituent of steel, namely martensite. The mathematical model describes both processes, heating and cooling. During the first one, heat is produced by Joule's effect from a very high alternating current passing through the rack. This situation is governed by a set of coupled PDEs/ODEs involving the electric potential, the magnetic vector potential, the temperature, the austenite transformation, the stresses and the displacement field. Once the workpiece has reached the desired temperature, the current is switched off an the cooling stage starts by aquaquenching. In this case, the governing equations involve the temperature, the austenite and martensite phase fractions, the stresses and the displacement field. This mathematical model has been solved by the FEM and 2D numerical simulations are discussed along the paper., This research was partially supported by Ministerio de Educacion y Ciencia under grants MTM2010-16401 and TEC2017-86347-C2-1-R with the participation of FEDER, and Consejeria de Educacion y Ciencia de la Junta de Andalucia, research group FQM-315. Giuseppe Viglialoro is a member of the Gruppo Nazionale per l'Analisi Matematica, la Probabilita e le loro Applicazioni (GNAMPA) of the Istituto Nazionale di Alta Matematica (INdAM) and he is partially supported by the research projects Evolutive and stationary Partial Differential Equations with a focus on biomathematics, funded by Fondazione di Sardegna (2019), and by MIUR (Italian Ministry of Education, University and Research) Prin 2017 Nonlinear Differential Problems via Variational, Topological and Set-valued Methods (Grant Number: 2017AYM8XW).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Non-volatile tuning of normally-on and off states of deep depletion ZrO2/O-terminated high voltage diamond MOSFET

  • Soto Portillo, Beatriz
  • Couret, M.
  • Cañas Fernández, Jesús
  • Castelan, A.
  • Rouger, N.
  • Araújo Gay, Daniel
  • Villar Castro, María del Pilar
  • Pernot, J.
Based on the stability of the deep depletion regime in diamond and the outstanding properties of this promising material for its use in power devices, p-channel deep depletion metal oxide semiconductor field effect transistors were fabricated on a (001) Ib nitrogen-doped high pressure high temperature diamond substrate. Taking advantage of the new concept of the non-volatile diamond-based photo switch, it is demonstrated that it is possible to tune the normally-on and normally-off states of the transistor by configuring the pn-junction space charge region. The devices under study was designed following an interdigital-like and a circular-like architectures presenting low threshold voltages (between 3 V and −3 V), an on/off ratio of 107 and a critical electric field numerically assessed of 9 MV.cm−1 at room temperature. This new degree of freedom opens the route for diamond based power electronics., 8 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Capacity Solution to a Nonlinear Elliptic Coupled System in Orlicz–Sobolev Spaces

  • Moussa, Hicham
  • Ortegón Gallego, Francisco
  • Rhoudaf, Mohamed
We analyze the existence of a capacity solution to the following nonlinear elliptic coupled system, whose unknowns are the temperature inside a semiconductor material, u, and the electric potential, ϕ, −Au = ρ(u)|∇ϕ|2 in Ω, div(ρ(u)∇ϕ) = 0 in Ω, ϕ = ϕ_0 on ∂Ω, u = 0 on∂Ω, where Ω ⊂ R^d, d ≥ 2 and Au = −div a(x, u,∇u) is a Leray–Lions operator defined on W^1_0 L_M(Ω), M is a N-function which does not have to satisfy a Δ_2 condition. Therefore, we work with generalized Orlicz– Sobolev spaces which are not necessarily reflexive. The function ϕ_0 is given. The proof combines truncation methods, monotonicity techniques and regularizing methods in Orlicz spaces. We introduce a sequence of approximate problems which converges (up to a subsequence) in a certain sense to a capacity solution in the context of non-reflexive Orlicz–Sobolev spaces., Ministerio de Ciencia, Innovación y Universidades (TEC2017-86347-C2-1-R) con la participación del Fondo Europeo de Desarrollo Regional (FEDER)., 28 páginas.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Lattice performance during initial steps of the Smart-Cut™ process in semiconducting diamond: A STEM study

  • Piñero Charlo, José Carlos
  • de Vecchy, John
  • Fernández de los Reyes, Daniel
  • Alba Muñoz, Gonzalo
  • Widiez, J
  • Di Cioccio, L
  • Lloret Vieira, Fernando Manuel
  • Araújo Gay, Daniel
  • Pernot, Julien
An alternative route for the development of diamond-based technologies is the Smart-Cut process. Such a process could make possible the combination of diamond and silicon technologies, as well as building alternative structures or manufacturing large diamond wafers. However, crystalline quality and implantation-related damages may alter the electronic properties of the diamond wafer. In fact, this is a critical bottleneck that needs to be analysed in order to develop a reliable diamond/Smart-Cut based technology. In this contribution, we present STEM-based experiments used to evaluate various key parameters such as the sharpness of the transition regions, the behaviour of the implanted region and diamond lattice performance in Smart-Cut processes. Indeed, an outstanding sp2/sp3 relation close to ideality (it is, that of undamaged diamond) is evidenced in the diamond-transfer region.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

H-Terminated Diamond Surface Band Bending Characterization by Angle-Resolved XPS

  • Alba, Gonzalo
  • Eon, David
  • Villar Castro, María del Pilar
  • Alcántara Puerto, Rodrigo
  • Chicot, Gauthier
  • Cañas Fernández, Jesús
  • Letellier, Juliette
  • Pernot, Julien
  • Araújo Gay, Daniel
Concerning diamond-based electronic devices, the H-terminated diamond surface is one of the most used terminations as it can be obtained directly by using H2 plasma, which also is a key step for diamond growth by chemical vapour deposition (CVD). The resultant surfaces present a p-type surface conductive layer with interest in power electronic applications. However, the mechanism for this behavior is still under discussion. Upward band bending due to surface transfer doping is the most accepted model, but has not been experimentally probed as of yet. Recently, a downward band bending very near the surface due to shallow acceptors has been proposed to coexist with surface transfer doping, explaining most of the observed phenomena. In this work, a new approach to the measurement of band bending by angle-resolved X-ray photoelectron spectroscopy (ARXPS) is proposed. Based on this new interpretation, a downward band bending of 0.67 eV extended over 0.5 nm was evidenced on a (100) H-terminated diamond surface.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Transport mechanism in O-terminated diamond/ZrO2 based MOSCAPs

  • Soto Portillo, Beatriz
  • Cañas, J.
  • Villar Castro, María del Pilar
  • Araújo Gay, Daniel
  • Pernot, Julien
Metal Oxide Semiconductor capacitors were fabricated using p-type O-terminated (001) diamond and zirconium dioxide deposited by atomic layer deposition at low temperature (100 ◦C). X-ray diffraction and transmission electron microscopy evidence monoclinic structure and polycrystalline nature of the oxide layer. I-V, C–V and C–F experiments have been performed in a large frequency range, i.e. from 1 Hz to 1 MHz, in order to analyse the electrical properties of the metal/dielectric/diamond stack. The presence of charges in the oxide and interface states induces a flat-band voltage shift in the C–V curve and a strong Fermi level pinning effect. A leakage current mechanism considering the correlation of the microstructural characterization and the electrical response is proposed., The authors would like to thank the Ministerio de Economia y Competitividad (MINECO) of the Spanish Government for funding under Grant No. TEC2017-86347-C2-1-R (DiamMOS project) and from ESP2017 91820 and PID2019 -110219RB-100, PID2020-117201RB-C21 projects. The authors would also thank the Junta de Andalucía (Comunidad Autónoma of Andalusia Government, Spain) for funding from FEDER-UCA18-106470, FEDER-UCA18-107851 and P20-00946 projects and as well as the grants for stays in research centres from the Promotion Programme of Research Activity of the University of Cadiz. In addition the authors acknowledge the expertise and support on different techniques allowing device fabrication (laser lithography and ALD) and characterization (XRD) of: Bruno Fernandez (Nanofab, Inst. Néel, CNRS, Grenoble), Laurent Cagnon and Eric Mossang (Inst. Néel, CNRS, Grenoble). The authors also thank to IMEYMAT (University of Cádiz) for the TEM facilities used in the microstructural characterization.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Modeling and numerical simulation of a parabolic trough collector using an HTF with temperature dependent physical properties

  • El Kouche, Amal
  • Ortegón Gallego, Francisco
This paper describes the mathematical modeling of a parabolic trough collector where the heat transfer fluid has temperature dependent physical properties for which we have developed our own mathematical expressions. For a specific location and date, the direct solar radiation and other sun–earth parameters are computed on a Julian day basis. Also, we have used certain known and recent correlations for the heat transfer coefficients appearing in this model. The mathematical model is governed by three nonlinear partial differential equations of parabolic type with initial/boundary value conditions. We describe a numerical algorithm in order to obtain the approximate solution of this model. Then, we carry out some numerical simulations which yield valuable information for the performance and efficiency of a solar PTC plant at the specific location. ⃝c 2021 TheAuthor(s). Published by ElsevierB.V. on behalf of InternationalAssociation forMathematics andComputers in Simulation (IMACS). This is an open access article under theCCBY-NC-ND license
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Diamond for Electronics: Materials, Processing and Devices

  • Araújo Gay, Daniel
  • Suzuki, Mariko
  • Lloret Vieira, Fernando Manuel
  • Alba Muñoz, Gonzalo
  • Villar Castro, María del Pilar
Progress in power electronic devices is currently accepted through the use of wide bandgap materials (WBG). Among them, diamond is the material with the most promising characteristics in terms of breakdown voltage, on-resistance, thermal conductance, or carrier mobility. However, it is also the one with the greatest difficulties in carrying out the device technology as a result of its very high mechanical hardness and smaller size of substrates. As a result, diamond is still not considered a reference material for power electronic devices despite its superior Baliga's figure of merit with respect to other WBG materials. This review paper will give a brief overview of some scientific and technological aspects related to the current state of the main diamond technology aspects. It will report the recent key issues related to crystal growth, characterization techniques, and, in particular, the importance of surface states aspects, fabrication processes, and device fabrication. Finally, the advantages and disadvantages of diamond devices with respect to other WBG materials are also discussed., The authors thank the Ministerio de Economia y Competitividad (MINECO) of the Spanish Government for funding under Grant Nos. TEC2017-86347-C2-1-R, ESP2017-91820, PID2020-117201RB-C21, and PID2019-110219RB-100 and the Junta de Andalucia (Andalusian Government, Spain) for funding through Nos. P20_00946, FEDER-UCA18- 106470 and FEDER-UCA18-107851 projects.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Diamond/γ-alumina band offset determination by XPS

  • Cañas, Jesus
  • Alba Muñoz, Gonzalo
  • Leinen, Dietmar
  • Lloret Vieira, Fernando Manuel
  • Gutiérrez Peinado, Marina
  • Eon, David
  • Pernot, Julien
  • Gheeraert, Etienne
  • Araújo Gay, Daniel
γ-Alumina is a promising candidate for fabricating the gate of the diamond metal oxide semiconductor field effect transistor based on oxygen termination due to its high bandgap of 6.7 eV and high static dielectric constant of 9. Besides these properties, having a sufficient barrier for holes is mandatory to avoid carriers leakage through the gate. However, the band offset of the diamond/alumina heterojunction can be affected by the alumina crystallinity and interface bonds, which depend on multiple factors such as deposition and annealing temperature or diamond surface treatment prior to deposition. In this work, the heterojunction of atomic layer deposited alumina and (1 0 0) p-diamond is studied using X-ray photoelectron spectroscopy (XPS). Transmission electron microscopy studies reveal that the deposited alumina layer is 35 nm thick and present the gamma phase. The valence band offset between diamond and γ-alumina is evaluated on a single sample with a new methodology based on an ion etching XPS depth profile. The obtained value for the valence band offset of diamond and γ-alumina is 3.4 eV.