Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Study of Early Stages in the Growth of Boron-Doped Diamond on Carbon Fibers

  • Millán Barba, Josué
  • Gutiérrez Peinado, Marina
  • Lloret Vieira, Fernando Manuel
  • Guzmán de Villoria, Roberto
  • Alcántara Puerto, Rodrigo
  • Haenen, Ken
  • Araújo Gay, Daniel
With the aim to improve the properties of aeronautical carbon fiber (CF)-reinforced polymer materials, boron-doped diamond (BDD) has been grown on commercial CFs by microwave plasma-enhanced chemical vapor deposition. The growth of a BDD layer on CF is expected to increase the mechanical, electrical, and thermal conductivities of the composite. The present contribution reports the different growth stages and their associated nanostructures of the BDD/CF resulting system using transmission electron microscopy, scanning electron microscopy, and Raman spectroscopy. The revealed carbon nanostructure shows four steps of growth with the following characteristics: 1) transitional interlayer, 2) graphite nanowall, 3) cauliflower-like nanocrystalline diamond, and 4) microcrystalline diamond.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Non-volatile tuning of normally-on and off states of deep depletion ZrO2/O-terminated high voltage diamond MOSFET

  • Soto Portillo, Beatriz
  • Couret, M.
  • Cañas Fernández, Jesús
  • Castelan, A.
  • Rouger, N.
  • Araújo Gay, Daniel
  • Villar Castro, María del Pilar
  • Pernot, J.
Based on the stability of the deep depletion regime in diamond and the outstanding properties of this promising material for its use in power devices, p-channel deep depletion metal oxide semiconductor field effect transistors were fabricated on a (001) Ib nitrogen-doped high pressure high temperature diamond substrate. Taking advantage of the new concept of the non-volatile diamond-based photo switch, it is demonstrated that it is possible to tune the normally-on and normally-off states of the transistor by configuring the pn-junction space charge region. The devices under study was designed following an interdigital-like and a circular-like architectures presenting low threshold voltages (between 3 V and −3 V), an on/off ratio of 107 and a critical electric field numerically assessed of 9 MV.cm−1 at room temperature. This new degree of freedom opens the route for diamond based power electronics., 8 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Lattice performance during initial steps of the Smart-Cut™ process in semiconducting diamond: A STEM study

  • Piñero Charlo, José Carlos
  • de Vecchy, John
  • Fernández de los Reyes, Daniel
  • Alba Muñoz, Gonzalo
  • Widiez, J
  • Di Cioccio, L
  • Lloret Vieira, Fernando Manuel
  • Araújo Gay, Daniel
  • Pernot, Julien
An alternative route for the development of diamond-based technologies is the Smart-Cut process. Such a process could make possible the combination of diamond and silicon technologies, as well as building alternative structures or manufacturing large diamond wafers. However, crystalline quality and implantation-related damages may alter the electronic properties of the diamond wafer. In fact, this is a critical bottleneck that needs to be analysed in order to develop a reliable diamond/Smart-Cut based technology. In this contribution, we present STEM-based experiments used to evaluate various key parameters such as the sharpness of the transition regions, the behaviour of the implanted region and diamond lattice performance in Smart-Cut processes. Indeed, an outstanding sp2/sp3 relation close to ideality (it is, that of undamaged diamond) is evidenced in the diamond-transfer region.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Interfacial integrity enhancement of atomic layer deposited alumina on boron doped diamond by surface plasma functionalization

  • Jaggernauth, A.
  • Silva, R.M.
  • Neto, M.A.
  • Oliveira, F.J.
  • Bdikin, I.K.
  • Alegre Salguero, María de la Paz
  • Gutiérrez Peinado, Marina
  • Araújo Gay, Daniel
  • Mendes, J.C.
  • Silva, R.F.
High dielectric constant (high-κ) thin films are ubiquitous in research as they impart enhanced properties to microelectronic applications. Novel combinations for coupling high-κ and ultra-wide band gap semiconductors are being investigated for niche applications, dependent on the environmental conditions for device operation. Typically, high-κ films such as alumina are deposited by atomic layer deposition (ALD), a technique heavily dependent on surface chemistry. This work investigates the effect of plasma surface functionalization of boron doped diamond (BDD) semiconducting films on interface quality with top-layers of ALD alumina (AlO) films, by analyzing its susceptibility to deformation; being particularly vital for electronics subjected to physically demanding environments. Alumina thin films were deposited unto as-grown (AlO-H-BDD) and O2 plasma treated (AlO-O-BDD) polycrystalline BDD. XPS analysis performed on plasma exposed BDD films, prior to AlO deposition, demonstrated a 3% increase in O surface ligands compared to the as-grown surface. Nanoindentation analysis demonstrated plastic deformation within the alumina layer for AlO-O-BDD, for the tested loads, whereas AlO-H-BDD experienced film delamination and deformation beyond the alumina-BDD interface. TEM analysis revealed that delamination was most likely due to low cohesive strength of alumina near the interface, explained by fewer –OH and –CO (ether) BDD surface ligands on H-BDD
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Diamond/γ-alumina band offset determination by XPS

  • Cañas, Jesus
  • Alba Muñoz, Gonzalo
  • Leinen, Dietmar
  • Lloret Vieira, Fernando Manuel
  • Gutiérrez Peinado, Marina
  • Eon, David
  • Pernot, Julien
  • Gheeraert, Etienne
  • Araújo Gay, Daniel
γ-Alumina is a promising candidate for fabricating the gate of the diamond metal oxide semiconductor field effect transistor based on oxygen termination due to its high bandgap of 6.7 eV and high static dielectric constant of 9. Besides these properties, having a sufficient barrier for holes is mandatory to avoid carriers leakage through the gate. However, the band offset of the diamond/alumina heterojunction can be affected by the alumina crystallinity and interface bonds, which depend on multiple factors such as deposition and annealing temperature or diamond surface treatment prior to deposition. In this work, the heterojunction of atomic layer deposited alumina and (1 0 0) p-diamond is studied using X-ray photoelectron spectroscopy (XPS). Transmission electron microscopy studies reveal that the deposited alumina layer is 35 nm thick and present the gamma phase. The valence band offset between diamond and γ-alumina is evaluated on a single sample with a new methodology based on an ion etching XPS depth profile. The obtained value for the valence band offset of diamond and γ-alumina is 3.4 eV.