Skip to main content

RECUPERACION ENERGETICA DE LAS VIBRACIONES DE ALAS DE AERONAVES A TRAVES DE SISTEMAS PIEZOELECTRICOS BASADOS EN DIAMANTES

PID2019-110219RB-I00

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Call year 2019
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

High-Quality SiO2/O-Terminated Diamond Interface: Band-Gap, Band-Offset and Interfacial Chemistry

  • Cañas Fernández, Jesús
  • Fernández de los Reyes, Daniel
  • Zakhtser, Alter
  • Dussarrat, Christian
  • Teramoto, Takashi
  • Gutiérrez Peinado, Marina
  • Gheeraert, Etienne
Silicon oxide atomic layer deposition synthesis development over the last few years has open the route to its use as a dielectric within diamond electronics. Its great band-gap makes it a promising material for the fabrication of diamond-metal-oxide field effects transistor gates. Having a sufficiently high barrier both for holes and electrons is mandatory to work in accumulation and inversion regimes without leakage currents, and no other oxide can fulfil this requisite due to the wide diamond band-gap. In this work, the heterojunction of atomic-layer-deposited silicon oxide and (100)-oriented p-type oxygen-terminated diamond is studied using scanning transmission electron microscopy in its energy loss spectroscopy mode and X-ray photoelectron spectroscopy. The amorphous phase of silicon oxide was successfully synthesized with a homogeneous band-gap of 9.4 eV. The interface between the oxide and diamond consisted mainly of single- and double-carbon-oxygen bonds with a low density of interface states and a straddling band setting with a 2.0 eV valence band-offset and 1.9 eV conduction band-offset.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Low temperature growth of nanocrystalline diamond: Insight thermal property

  • Millán Barba, Josué
  • Taylor, A.
  • Bakkali, H.
  • Alcántara Puerto, Rodrigo
  • Lloret Vieira, Fernando Manuel
  • Domínguez de la Vega, Manuel
  • Mortet, V.
  • Gutiérrez Peinado, Marina
  • Araújo Gay, Daniel
  • Guzmán de Villoria, R.
One of the limitations of materials for high-power devices and structural coatings applications is heat dissipation. Diamond is a suitable material for heat distribution due to its high thermal conductivity. Nevertheless, it is usually grown at high temperature (800–1200 ◦C), which limits its use as a coating for substrates vulnerable to degradation at high temperatures. In this work, it is studied the effect of the distance between the plasma source and substrate on the growth of nanocrystalline diamond layers on silicon substrates at low temperature (<450 ◦C) by microwave linear antenna plasma enhanced chemical vapour deposition (MW-LA-PECVD) in pulse mode. The nanocrystalline diamond films have been analysed by scanning electron microscopy (SEM), atomic force microscopy (AFM) and Raman spectroscopy. Finally, the superficial thermal conductivity of the diamond layers was determined by scanning thermal microscopy-AFM (SThM-AFM)., 6 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Non-volatile tuning of normally-on and off states of deep depletion ZrO2/O-terminated high voltage diamond MOSFET

  • Soto Portillo, Beatriz
  • Couret, M.
  • Cañas Fernández, Jesús
  • Castelan, A.
  • Rouger, N.
  • Araújo Gay, Daniel
  • Villar Castro, María del Pilar
  • Pernot, J.
Based on the stability of the deep depletion regime in diamond and the outstanding properties of this promising material for its use in power devices, p-channel deep depletion metal oxide semiconductor field effect transistors were fabricated on a (001) Ib nitrogen-doped high pressure high temperature diamond substrate. Taking advantage of the new concept of the non-volatile diamond-based photo switch, it is demonstrated that it is possible to tune the normally-on and normally-off states of the transistor by configuring the pn-junction space charge region. The devices under study was designed following an interdigital-like and a circular-like architectures presenting low threshold voltages (between 3 V and −3 V), an on/off ratio of 107 and a critical electric field numerically assessed of 9 MV.cm−1 at room temperature. This new degree of freedom opens the route for diamond based power electronics., 8 páginas
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

High phosphorous incorporation in (100)-oriented MP CVD diamond growth

  • Lloret Vieira, Fernando Manuel
  • Soto Portillo, Beatriz
  • Gutiérrez Peinado, Marina
  • Haenen, Ken
  • Araújo Gay, Daniel
Diamond n-type layers are crucial for the development of a new bipolar diamond-based electronic technology. However, the difficulties to incorporate impurity atoms into the diamond lattice make its growth a stage of technological research still in progress. Phosphorus doping has been carried out successfully on (111)-oriented diamond substrates, reaching high concentrations and good reproducibility. Nevertheless, such reproducible results have not been obtained for the (100) growth orientations yet, even though the (100) substrate orientation is still the most used diamond substrate for electronic applications. In this study, three samples are grown by microwave plasma-enhanced chemical vapor deposition on diamond (100)-oriented high pressure high temperature substrates. All samples are deposited with the same growth conditions except methane, which was varied between 1.5 % and 3.5 %. A different growth mechanism is observed for each of the methane content used. The step flow growth mechanism shows increased phosphorus incorporation, determined by cathodoluminescence (CL) in cross sectional view in focused ion beam preparations. This sample also shows a less rough surface and no crystal defects observable by transmission electron microscopy (TEM). That is why these growth conditions are used for the fabrication of the n-type layer of a p+/p−/n stack. Ellipsometry and TEM measurements on this sample yield a high growth rate of 3.5 μm/h with a phosphorus concentration of 4 × 1017 cm−3, estimated by CL spectroscopy. The sample shows a low density of surface defects, observed by optical microscopy. However, TEM observations show dislocations with 1/2 a〈110〉 burger vector and stacking faults with 1/3 〈111〉 displacement vector. © 2023 The Author(s)
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publication Artículo científico (JournalArticle)

Boron-doped diamond growth on carbon fibre: Enhancing the electrical conductivity

  • Millán Barba, Josué
  • Bakkali, Hicham
  • Lloret Vieira, Fernando Manuel
  • Gutiérrez Peinado, Marina
  • Guzmán de Villoria, R.
  • Domínguez de la Vega, Manuel
  • Haenen, Ken
  • Araújo Gay, Daniel
Carbon fibre reinforced polymers (CRFP) are extensively used in many industrial applications thanks to its mechanical properties and its low weight. Nevertheless, the orthotropic character of CRFP highly reduces its applications. The transversal electrical conductivity in CRFP is two orders poorer than in the longitudinal direction. To improve their electrical properties, this work proposes the use of polycrystalline boron doped diamond (BDD) as coating of the carbon fibres (CF). BDD coating is deposited on CF surface using microwave plasma enhanced chemical vapor deposition (MPCVD) system. The BDD coating forms a rigid conductive coating around the CF as a core–shell structure. Here, an electrical characterization of both, 12,000 filaments (a tow) and a single coated filament, are carried out in the longitudinal and cross-section directions. Macro, micro and local analysis using the Kelvin method, Conductive Atomic Force Microscopy (C-AFM), and Scanning Microwave Impedance Microscopy (sMIM), were carried out to evidence the improvement of the electrical properties. Macro measurement reveals that the BDD coating decreases to half the resistivity of the CF. The BDD coating raises the local electrical conductivity of the CF by an order of magnitude with respect to the uncoated ones. sMIM maps identified BDD locations in ring-like configurations. © 2023 The Authors