Skip to main content

DEMOSTRADORES TECNOLOGICOS BASADOS EN GUIAS VACIAS INTEGRADAS EN SUSTRATO PARA APLICACIONES ESPACIALES EMERGENTES

TEC2016-75934-C4-3-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2016
State Plan 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Compact Folded Bandpass Filter in Empty Substrate Integrated Coaxial Line at S-Band

  • Martinez, Leticia
  • Belenguer, Angel
  • Borja, Alejandro L.
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] This letter presents a novel compact folded bandpass filter in empty substrate integrated coaxial line (ESICL) technology. To obtain these compact filters, the inverters are modified to provide a 180 degrees bend when inserted in an ESICL. As a result, the proposed filter has a more compact topology based on parallel resonators. A sixth-order Chebyshev bandpass filter operating at 3 GHz has been designed, manufactured, and measured to experimentally validate this new folded configuration. The length of the novel compact filter has been reduced by 82.2% with respect to an equivalent in-line filter, obtaining very similar results in terms of electrical response., This work was supported in part by the Ministerio de Economia y Competitividad, Spanish Government through Research Projects under Grant TEC2016-75934-C4-3-R and Grant TEC2016-75934-C4-1-R and in part by the Ministerio de Ciencia, Innovacion y Universidades through the Fellowship Program for Training University Professors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Advanced Filtering Solutions in Coaxial SIW Technology Based on Singlets, Cascaded Singlets, and Doublets

  • Sirci, Stefano
  • Sánchez-Soriano, Miguel Ángel
  • Martínez Pérez, Jorge Daniel|||0000-0002-7119-3714
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The use of singlets, cascaded singlets and doublets in coaxial substrate integrated waveguide (SIW) technology is proposed in this paper, with the aim of implementing low-loss filters with very compact size and highly-selective symmetric, asymmetric as well as dual-band responses. Singlets based on coaxial SIW resonator structures with source-load coupling are presented and studied. Then, different filter examples based on N cascaded singlets are designed, fabricated and measured at 7.5 GHz, with up to N transmission zeros (TZs) that can be easily located below and above the passband. Moreover, the application of doublets based on a dual-mode coaxial SIW resonator with source-load coupling for achieving extremely compact dual-band filters is presented, and two examples with different bandwidth configuration for each channel are designed, demonstrating the flexibility of the proposed coaxial SIW structure. The obtained experimental results of the different implemented filters show a good agreement with simulations, thus confirming the interesting potential application of these structures for the design of very compact devices with advanced filtering responses., This work was supported by the Ministerio de Economia, Industria y Competitividad, Spanish Government, under Project TEC2016-75934-C4-3-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fast Frequency Sweep Technique Based on Segmentation for the Acceleration of the Electromagnetic Analysis of Microwave Devices

  • Martínez-Zamora, Juan Ángel
  • BELENGUER MARTÍNEZ, ANGEL
  • Esteban González, Héctor|||0000-0002-5936-658X
[EN] The characterization of communication devices in a certain frequency band can be accelerated if a fast frequency sweep technique is used instead of a discrete frequency sweep. Existing fast frequency sweep techniques are either complex or specific for a certain electromagnetic solver. In this work, a new fast frequency sweep method is proposed that consists in segmenting the device under analysis into simple building blocks. Each building block is characterized with a generalized (multimode) circuital matrix whose elements present a simple and flat frequency response that is interpolated using natural cubic splines with very few points. In this way, the response of each block along the whole frequency band is obtained efficiently and accurately with as many frequency points as desired. Then, the circuital matrices of all the blocks are cascaded and the circuital matrix of the whole device in obtained. The new fast frequency sweep was successfully applied to the analysis of different types of devices (all metallic rectangular waveguide filter, dielectric loaded rectangular waveguide filter, and substrate integrated waveguide filter). The computational times were reduced to 15% or 19%, depending on the device, when compared with a discrete frequency sweep using the same electromagnetic solver., This research was funded by Ministerio de Economia, Industria y Competitividad, Spanish Government, under Research Projects TEC2016-75934-C4-3-R and TEC2016-75934-C4-1-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Highly Reliable and Repeatable Soldering Technique for Assembling Empty Substrate Integrated Waveguide Devices

  • Martinez, Juan A.
  • Belenguer, Angel
  • Esteban González, Héctor|||0000-0002-5936-658X
[EN] In this paper, a novel mymargin soldering technique that improves the fabrication process of empty substrate integrated waveguide (ESIW) devices is presented. Up until now, in order to fabricate an ESIW device, the tin solder paste was distributed, before assembling, on the contact surface between layers, in order to ensure a good electrical contact. This process has a low degree of repeatability (random soldering thickness and distribution of tin) and reliability (a significant number of nonworking prototypes due to tin overflow). In this paper, we propose the mechanization of a set of plated vias just next to the metalized walls of the ESIW in the central layer. Next, in the top and bottom covers that close this ESIW, additional plated vias are drilled in the same position so that, when the device is assembled (using screws or rivets), metalized holes can be seen passing through the whole structure from top to bottom. These holes are then used as soldering vias that can guide the tin paste straight to the point where it is needed. When the paste is dried, soldered vias ensure a very good electrical contact between layers. In addition, the fluid tin fills any small gap that appears between layers, thus providing a very good electrical contact and mechanical union. This novel soldering technique has been validated with experimental results. Several prototypes of filters centered at 13 and 35 GHz have been fabricated, proving the repeatability and reliability of the proposed soldering technique., This work was supported by the Ministerio de Economiy Competitividad, Spanish Government, under Project TEC2016-75934-C4-3-R and Project TEC2016-75934-C4-1-R.