Skip to main content

FABRICACION, CARACTERIZACION, SIMULACION, MODELADO Y APLICACIONES DE DISPOSITIVOS DE CONMUTACION RESISTIVA

TEC2017-84321-C4-3-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre UNIVERSIDAD DE GRANADA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Linear-Phase-Type probability modelling of functional PCA with applications to resistive memories

  • Ruiz-Castro, Juan E.
  • Acal, Christian
  • Aguilera, Ana M.
  • Roldán, Juan B.
  • Aguilera-Morillo, M. Carmen|||0000-0003-1027-9773
[EN] Functional principal component analysis (FPCA) based on Karhunen-Loeve (K-L) expansion allows to describe the stochastic evolution of the main characteristics associated to multiple systems and devices. Identifying the probability distribution of the principal component scores is fundamental to characterize the whole process. The aim of this work is to consider a family of statistical distributions that could be accurately adjusted to a previous transformation. Then, a new class of distributions, the linear-phase-type, is introduced to model the principal components. This class is studied in detail in order to prove, through the K-L expansion, that certain linear transformations of the process at each time point are phase-type distributed. This way, the one-dimensional distributions of the process are in the same linear-phase-type class. Finally, an application to model the reset process associated with resistive memories is developed and explained. (C) 2020 Published by Elsevier B.V. on behalf of International Association for Mathematics and Computers in Simulation (IMACS)., We would like to thank F. Campabadal and M.B. Gonzalez from the IMB-CNM (CSIC) in Barcelona for fabricating and providing the experimental measurements of the devices employed here. We acknowledge the support of the Spanish Ministry of Science, Innovation and Universities under projects TEC2017-84321-C4-3-R, MTM201788708-P, IJCI-2017-34038 (also supported by the FEDER, Spain program) and the PhD grant, Spain (FPU18/01779) awarded to Christian Acal. This work has made use of the Spanish ICTS Network MICRONANOFABS
Repositori Institucional UIB
Publication Artículo científico (JournalArticle)

On the Thermal Models for Resistive Random Access Memory Circuit Simulation

  • Stavrinides, Stavros G.
  • Suñé, Jordi
  • Chua, Leon O.
  • Roldán, Juan B.
  • González-Cordero, Gerardo
  • Picos, Rodrigo
  • Miranda, Enrique
  • Palumbo, Félix
  • Jiménez-Molinos, Francisco
  • Moreno, Enrique
  • Maldonado, David
  • Baldomá, Santiago B.
  • Moner Al Chawa, Mohamad
  • de Benito, Carol
[eng] Resistive Random Access Memories (RRAMs) are based on resistive switching (RS) operation and exhibit a set of technological features that make them ideal candidates for applications related to non-volatile memories, neuromorphic computing and hardware cryptography. For the full industrial development of these devices different simulation tools and compact models are needed in order to allow computer-aided design, both at the device and circuit levels. Most of the different RRAM models presented so far in the literature deal with temperature effects since the physical mechanisms behind RS are thermally activated; therefore, an exhaustive description of these effects is essential. As far as we know, no revision papers on thermal models have been published yet; and that is why we deal with this issue here. Using the heat equation as the starting point, we describe the details of its numerical solution for a conventional RRAM structure and, later on, present models of different complexity to integrate thermal effects in complete compact models that account for the kinetics of the chemical reactions behind resistive switching and the current calculation. In particular, we have accounted for different conductive filament geometries, operation regimes, filament lateral heat losses, the use of several temperatures to characterize each conductive filament, among other issues. A 3D numerical solution of the heat equation within a complete RRAM simulator was also taken into account. A general memristor model is also formulated accounting for temperature as one of the state variables to describe electron device operation. In addition, to widen the view from different perspectives, we deal with a thermal model contextualized within the quantum point contact formalism. In this manner, the temperature can be accounted for the description of quantum effects in the RRAM charge transport mechanisms. Finally, the thermometry of conducting filaments and the corresponding models considering different dielectric materials are tackled in depth.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Variability estimation in resistive switching devices, a numerical and kinetic Monte Carlo perspective

  • Maldonado, D.
  • Aldana, S.
  • González Bargalló, Mireia
  • Jiménez-Molinos, F.
  • Ibáñez, M. J.
  • Barrera, D.
  • Campabadal Segura, Francesca
  • Roldán, J. B.
We have analyzed variability in resistive memories (Resistive Random Access Memories, RRAMs) making use of advanced numerical techniques to process experimental measurements and simulations based on the kinetic Monte Carlo technique. The devices employed in the study were fabricated using the TiN/Ti/HfO2/W stack. The switching parameters were obtained making use of new developed extraction methods. The appropriateness of the advanced parameter extraction methodologies has been checked by comparison to kinetic Monte Carlo simulations; in particular, the reset and set events have been studied and detected. The data obtained were employed to shed light on the resistive switching operation and the cycle-to-cycle variability. It has been shown that variability depends on the numerical technique employed to obtain the set and reset voltages, therefore, this issue must be taken into consideration in RS characterization and modeling studies. The proposed techniques are complementary and depending on the technology and the curves shape the features of a particular method could make it to be the most appropriate., The authors thank the support of the Spanish Ministry of Science, Innovation and Universities and the FEDER program through projects TEC2017-84321-C4-1-R, TEC2017-84321-C4-3-R, and projects A. TIC.117.UGR18, IE2017-5414 and B.TIC.624.UGR20 funded by the Consejería de Conocimiento, Investigaci ́on y Universidad, Junta de Andalucía (Spain) and the FEDER program. Funding for open access charge: Universidad de Granada/CBUA, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unipolar resistive switching behavior in Al2O3/HfO2 multilayer dielectric stacks: fabrication, characterization and simulation

  • Maestro-Izquierdo, Marcos
  • Gonzalez, Mireia Bargalló
  • Jiménez-Molinos, F.
  • Moreno, E
  • Roldan, J B
  • Campabadal, Francesca
In this work, the impact of different HfO2/Al2O3-based multilayer dielectric stack (DS) configurations on the electrical characteristics and on the resistive switching (RS) performance of Ni/Insulator/Silicon devices has been systematically investigated. Significant differences are observed in the electrical characteristics of the fabricated bilayer, trilayer and pentalayer stacks compared to a single HfO2 layer of the same physical thickness. The RS analysis has shown similar low resistance state currents and set voltages for all the DS combinations whereas currents at the high resistance state and reset voltages depend on the DS. The shift of the reset voltage to lower values for HfO2 and Al2O3/HfO2/Al2O3 cases is explained by the results from thermal simulations that reveal that these differences could be associated to the different temperature distributions at the narrowest part of the conductive filament immediately before the thermally triggered reset process occurs., The authors thank the support of the Spanish Ministry of Science, Innovation and Universities and the ERDF program through projects TEC2017-84321-C4-1-R, TEC2017-84321-C4-3-R. We also thank the support of FENDECYT project, reference 3180130. This work has made use of the Spanish ICTS Network MICRONANOFABS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental evaluation of the dynamic route map in the reset transition of memristive ReRAMs

  • Maldonado, David
  • Gonzalez, Mireia B.
  • Campabadal, Francesca
  • Jimenez-Molinos, Francisco
  • Chawa, M. Moner Al
  • Stavrinides, Stavros G.
  • Roldan, Juan B.
  • Tetzlaff, Ronald
  • Picos, Rodrigo
  • Chua, Leon O.
In this paper, we analyze the reset transition in bipolar TiN/Ti/HfO2 (10 nm)/Al2O3(2 nm)/W ReRAM devices using a tool that allows studying the temporal behaviour of these devices. This tool, the Dynamic Route Map (DRM), provides information about the temporal evolution of the state variable that governs the behaviour of the device, thus allowing an increased insight into resistive switching processes. Here, we show that this DRM is a powerful tool, that may help explaining some non intuitive behaviours of memristors, like the difference in the reset voltage when the inputs are from different frequency or shape. Using this tool, this fact can be explained as a different trajectory on a unique surface defining the device. As a first step, we have used two different models, one based on a physical description, and another one based on the mathematical definition of memristor as a non linear relation between charge and flux. We check that similar DRM can be obtained from both models. Additionally, several series of set-reset transitions have been measured using voltage ramps of different slopes. From the measured transitions, the corresponding resistance has been extracted and, assuming conductive filaments (CF) as the switching mechanism, the corresponding CF radius has been calculated. Using these data, we show that explanations from the model are also supported when using experimental data, thus proving the validity of the approach., We thank the Spanish Ministry of Science for Projects DPI2017-86610-P, TEC2017-84877-R, TEC2017-84321-C4-1-R, and TEC2017-84321-C4-3-R (also supported by the FEDER program). This work has made use of the Spanish ICTS Network MICRONANOFABS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Current transient response and role of the internal resistance in HfO<inf>x</inf>-based memristors

  • Gonzalez, Mireia Bargalló
  • Maestro-Izquierdo, Marcos
  • Jiménez-Molinos, F.
  • Roldán, J. B.
  • Campabadal, Francesca
Filamentary-type valence change memristors based on HfO2 are currently being explored as potential candidates to emulate the synaptic functionality of biological inspired neuromorphic circuits due to their ability to tune their resistance state (synaptic weight) needed to optimize their learning mechanisms. In this paper, the resistive switching dynamics associated with the electric field and temperature-assisted oxygen vacancy/ion migration, generation, and recombination processes is investigated in-depth through current transient experiments. Special attention is given to the influence of the intrinsic series resistance and applied voltage on the switching speed and on the abrupt or gradual resistance modulation capability, providing a deeper insight into the key parameters that have a crucial influence in the SET and RESET transitions and can strongly impact the programming energy consumption of redox-based HfO2-memristors., This work was partially funded by the Spanish Ministry of Science and Innovation and the ERDF program through Project Nos. TEC2017-84321-C4-1-R and TEC2017-84321C4-3-R. The support of FENDECYT project, Reference No. 3180130, is also acknowledged. This work has made use of the Spanish ICTS Network MICRONANOFABS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Neural network based analysis of random telegraph noise in resistive random access memories

  • González-Cordero, G.
  • González, Mireia Bargalló
  • Morell, A.
  • Jiménez-Molinos, F.
  • Campabadal, Francesca
  • Roldán, J. B.
The characterization of random telegraph noise (RTN) signals in resistive random access memories (RRAM) is a challenge. The inherent stochastic operation of these devices, much different to what is seen in other electron devices such as MOSFETs, diodes, etc, makes this issue more complicated from the mathematical viewpoint. Nevertheless, the accurate modeling of these type of signals is essential for their use in digital and analog applications. RTN signals are revealed to be linked to the emission and capture of electrons by traps close to the conductive filament that can influence resistive switching operation in RRAMs. RTN features depend on the number of active traps, on the interaction between these traps at different times, on the occurrence of anomalous effects, etc Using a new representation technique, the locally weighted time lag plot (LWTLP), a highly efficient method in terms of computation, data from current-time (I-t) traces can be represented with a pattern that allows the analysis of important RTN signal features. In addition, self-organizing maps, a neural network devoted to clustering, can be employed to perform an automatic classification of the RTN traces that have similar LWTLP patterns. This pattern analysis allows a better understanding of RTN signals and the physics underlying them. The new technique presented can be performed in a reasonable computing time and it is particularly adequate for long (I-t) traces. We introduce here this technique and the most important results that can be drawn when applied to long RTN traces experimentally obtained in RRAMs., The authors thank the support of the Spanish Ministry of Science and Universities and the FEDER program through projects TEC2017-84321-C4-1-R, TEC2017-84321-C4-3-R, TEC2017-84321-C4-4-R. This work has made use of the Spanish ICTS Network MICRONANOFABS., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

On the Thermal Models for Resistive Random Access Memory Circuit Simulation

  • Roldán, Juan B.|||0000-0003-1662-6457
  • González-Cordero, Gerardo|||0000-0002-5627-9827
  • Picos, Rodrigo|||0000-0002-9167-6422
  • Miranda, E.|||0000-0003-0470-5318
  • Palumbo, Félix|||0000-0002-7749-5035
  • Jiménez-Molinos, Francisco|||0000-0002-8866-7568
  • Moreno Pérez, Enrique|||0000-0002-5304-1311
  • Maldonado, David|||0000-0002-3475-9440
  • Baldomá, Santiago B.|||0000-0001-9007-019X
  • Moner Al Chawa, Mohamad|||0000-0001-8886-4708
  • de Benito, Carol
  • Stavrinides, Stavros G.|||0000-0001-8484-1402
  • Suñé, Jordi|||0000-0003-0108-4907
  • Chua, Leon O.
Resistive Random Access Memories (RRAMs) are based on resistive switching (RS) operation and exhibit a set of technological features that make them ideal candidates for applications related to non-volatile memories, neuromorphic computing and hardware cryptography. For the full industrial development of these devices different simulation tools and compact models are needed in order to allow computer-aided design, both at the device and circuit levels. Most of the different RRAM models presented so far in the literature deal with temperature effects since the physical mechanisms behind RS are thermally activated; therefore, an exhaustive description of these effects is essential. As far as we know, no revision papers on thermal models have been published yet; and that is why we deal with this issue here. Using the heat equation as the starting point, we describe the details of its numerical solution for a conventional RRAM structure and, later on, present models of different complexity to integrate thermal effects in complete compact models that account for the kinetics of the chemical reactions behind resistive switching and the current calculation. In particular, we have accounted for different conductive filament geometries, operation regimes, filament lateral heat losses, the use of several temperatures to characterize each conductive filament, among other issues. A 3D numerical solution of the heat equation within a complete RRAM simulator was also taken into account. A general memristor model is also formulated accounting for temperature as one of the state variables to describe electron device operation. In addition, to widen the view from different perspectives, we deal with a thermal model contextualized within the quantum point contact formalism. In this manner, the temperature can be accounted for the description of quantum effects in the RRAM charge transport mechanisms. Finally, the thermometry of conducting filaments and the corresponding models considering different dielectric materials are tackled in depth.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Neural network based analysis of random telegraph noise in resistive random access memories

  • González-Cordero, Gerardo|||0000-0002-5627-9827
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Morell, Antoni|||0000-0003-2249-8594
  • Jiménez-Molinos, Francisco|||0000-0002-8866-7568
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Roldán, Juan B.|||0000-0003-1662-6457
The characterization of random telegraph noise (RTN) signals in resistive random access memories (RRAM) is a challenge. The inherent stochastic operation of these devices, much different to what is seen in other electron devices such as MOSFETs, diodes, etc, makes this issue more complicated from the mathematical viewpoint. Nevertheless, the accurate modeling of these type of signals is essential for their use in digital and analog applications. RTN signals are revealed to be linked to the emission and capture of electrons by traps close to the conductive filament that can influence resistive switching operation in RRAMs. RTN features depend on the number of active traps, on the interaction between these traps at different times, on the occurrence of anomalous effects, etc Using a new representation technique, the locally weighted time lag plot (LWTLP), a highly efficient method in terms of computation, data from current-time (I-t) traces can be represented with a pattern that allows the analysis of important RTN signal features. In addition, self-organizing maps, a neural network devoted to clustering, can be employed to perform an automatic classification of the RTN traces that have similar LWTLP patterns. This pattern analysis allows a better understanding of RTN signals and the physics underlying them. The new technique presented can be performed in a reasonable computing time and it is particularly adequate for long (I-t) traces. We introduce here this technique and the most important results that can be drawn when applied to long RTN traces experimentally obtained in RRAMs.