Skip to main content

FABRICACION, CARACTERIZACION, SIMULACION, MODELADO Y APLICACIONES DE DISPOSITIVOS DE CONMUTACION RESISTIVA

TEC2017-84321-C4-1-R

•
Funding agency name Agencia Estatal de Investigación
Funding agency acronym AEI
Program Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Call Proyectos I+D+i Retos de Investigación
Call year 2017
State Plan 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Beneficiary centre AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Tunability Properties and Compact Modeling of HfO2-Based Complementary Resistive Switches Using a Three-Terminal Subcircuit

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Poblador, S.|||0000-0003-4044-6990
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
Complementary resistive switching (CRS) arises when two bipolar-mode memristive devices are antiserially connected, forming a single functional structure. The combined effect of both memristors leads to the appearance of high (HRS) and low (LRS) resistance windows in the current-voltage (I-V) characteristic that finds application in fields such as neuromorphic computing and logic circuits. In this work, the electric behavior of HfO2-based CRS devices intentionally fabricated with a common central electrode is investigated both from experimental and modeling viewpoints. Experiments reveal that the maximum voltage applied to the structure allows tuning the amplitude of the resistance window following a self-balance dynamics. The origin of the abrupt (digital) and gradual (analog) transitions between the HRS and LRS states is elucidated through the inclusion of the snapback and snapforward effects in the switching dynamics. TheI-Vcharacteristics of the CRS devices are compact modeled with two opposite-biased memdiodes and simulated in LTSpice using an equivalent three-terminal subcircuit. It is shown that the proposed model is able to reproduce with a high degree of accuracy not only the observed CRS behavior for HfO2 but also the main features exhibited by devices with a wide variety of oxide/electrode materials.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A flexible characterization methodology of RRAM: Application to the modeling of the conductivity changes as synaptic weight updates

  • Pedro, M.
  • Martín-Martínez, Javier
  • Rodríguez, R.
  • González, M. B.
  • Campabadal, Francesca
  • Nafría, Montserrat
In this work, an automatic and flexible measurement setup, which allows a massive electrical characterization of single RRAM devices with pulsed voltages, is presented. The evaluation of the G-V maps under single-pulse test-schemes is introduced as an example of application of the proposed methodology, in particular for neuromorphic engineering, where the fine analog control of the synaptic device conductivity state is required, by inducing small changes in each learning iteration. To describe the obtained data, a time-independent compact model for memristive devices is used. The fitting parameters statistical distributions are further studied., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Analysis of resistive switching processes in TiN/Ti/HfO ⁠2/W devices to mimic electronic synapses in neuromorphic circuits

  • González-Cordero, G.
  • Pedro, M.
  • Martín-Martínez, Javier
  • González, M. B.
  • Jiménez-Molinos, Francisco
  • Campabadal, Francesca
  • Nafría, N.
  • Roldán, J.B.
The potential of resistive switching (RS)devices based on TiN/Ti/HfO 2/W stacks to mimic synapses within a neuromorphic applications context is analyzed in depth. The fabrication and characterization process are explained and a physically-based modeling description is performed to understand the devices resistive switching operation and conductance modulation. The model employed considers truncated-cone shaped conductive filament (CF)geometries and parasitic ohmic resistances linked to the device conductive filaments in addition to device capacitances. The temporal evolution is analysed assuming a valence change memory operation, where the oxide surrounding the CF is considered as well as the CF thermal description. A complete series of RS cycles has been fitted with the model by means of the gradient descent algorithm to study the compliance current effects on the conductance modulation. To do so, experimental and modeled results are extensively compared., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Assessing the correlation between location and size of catastrophic breakdown events in high-k mim capacitors

  • Muñoz-Gorriz, J.
  • Blachier, D.
  • Reimbold, G.
  • Campabadal, Francesca
  • Sune, J.
  • Monaghan, S.
  • Cherkaoui, K.
  • Hurley, P.K.
  • Miranda, E.
The connection between the spatial location of catastrophic breakdown spots occurring in metal-insulator-metal capacitors with a high-permittivity dielectric film (HfO) and their respective sizes is investigated. Large area structures ( 10^{4}-10^{5}~\mu \text{m}^{2} ) are used for this correlation assessment since, for statistical considerations, a large number of spots in the same device is imperatively required. The application of ramped or constant voltage stress across the capacitor generates defects inside the dielectric that result in the formation of multiple failure sites. High power dissipation takes place locally, leaving a permanent mark on the top electrode of the device. The set of marks constitutes a point pattern with attributes that can be analyzed from a statistical viewpoint. The correlation between the spot locations and their sizes is assessed through the mark correlation function and the method of reverse conditional moments. The study reveals that for severely damaged devices, there exists a link between the spot location and size that leads to a short range departure from a complete spatial randomness (CSR) process. It is shown that the affected region around each failure site is actually larger than the visible area of the spot. A structural modification of the dielectric layer in the vicinity of the spot caused by the huge thermal effects occurring just before the microexplosion might be the reason behind this extension of the damage., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

An unsupervised and probabilistic approach to Pavlov's dog experiment with OxRAM devices

  • Pedro, M.
  • Martín-Martínez, Javier
  • Rodríguez, R.
  • González, M. B.
  • Campabadal, Francesca
  • Nafría, Montserrat
In this work, a potential basis for implementing unsupervised associative learning in two or more memristors within neuromorphic architectures is proposed. The experimental demonstration is carried out by means of emulating the Pavlov's dog classical conditioning experiment with two OxRAM devices, in which the dependence of the probability of association on test parameters, such as the pulse amplitude, is studied., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Mimicking the spike-timing dependent plasticity in HfO2-based memristors at multiple time scales

  • Maestro-Izquierdo, M.
  • González, M. B.
  • Campabadal, Francesca
In this work, TiN/Ti/HfO/W memristors have been investigated to mimic the spike-time dependent plasticity (STDP)of biological synapses at multiple time scales. For this purpose, a smart software tool has been implemented to control the instrumentation and to perform a dedicated ultra-fast pulsed characterization. Different time scales, from tens of milliseconds to hundreds of nanoseconds, have been explored to emulate the STDP learning rule in electronic synapses. The impact of such times on the synaptic weight potentiation and depression characteristics has also been discussed., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

A new technique to analyze RTN signals in resistive memories

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

A new technique to analyze RTN signals in resistive memories

  • González-Cordero, G.
  • González, M. B.
  • Campabadal, Francesca
  • Jiménez-Molinos, Francisco
  • Roldán, J.B.
A new technique to study random telegraph noise is proposed. It is based on an analysis of the variations of the sampled current instead of the current itself. These current variations are represented following a time-lag-plot scheme. The meaning of the graphical patterns obtained is discussed. Specifically, this new method is very effective for detecting current spikes due to the presence of fast traps. In addition, it can be used to easily detect an unsuitable sampling rate and achieve optimum RTN measurement conditions. This technique has been used for analyzing several current versus time traces for the state-of-the-art Resistive Random Access Memories (RRAMs). The results are analyzed and the patterns obtained with the proposed method are linked to the characteristic features of the corresponding random telegraph noise signals, showing the validity and effectiveness of the proposed method., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Influence of magnetic field on the operation of TiN/Ti/HfO2/W resistive memories

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Influence of magnetic field on the operation of TiN/Ti/HfO 2 /W resistive memories

  • Maldonado, David
  • Roldán, A.M.
  • González, M. B.
  • Jiménez-Molinos, Francisco
  • Campabadal, Francesca
  • Roldán, J.B.
A characterization process for resistive RAM (RRAMs) based on TiN/Ti/HfO 2/W stacks has been performed. In addition to conventional electrical measurements, the effects of the magnetic field (MF) have also been considered. The influence of the Lorenz force on resistive switching (RS) processes and on the device conduction was explored both in the Low Resistance State (LRS) and in the High Resistance State (HRS). The MF influences the set/reset voltages and current distributions, spreading the range of current values obtained in a long RS series of successive set and reset cycles and modifying set voltage values. For the reset voltage, the influence is less significant than the cycle-to-cycle variability., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unpredictable Bits Generation Based on RRAM Parallel Configuration

  • Arumí, Daniel
  • Gómez-Pau, Álvaro
  • Manich, Salvador
  • Rodríguez-Montañés, Rosa
  • González, M. B.
  • Campabadal, Francesca
In this letter, a cell with the parallel combination of two TiN/Ti/HfO/W resistive random access memory (RRAM) devices is studied for the generation of unpredictable bits. Measurements confirm that a simultaneous parallel SET operation in which one of the two RRAMs switches to the low-resistance state is an unpredictable process showing random properties for different sets of cells. Furthermore, given a device pair, the same device switches during subsequent write operations. The proposed cell is also analyzed under different current compliances and pulse widths with the same persistent behavior being observed. The features of the proposed cell, which provide data obfuscation without compromising reliability, pave the way for its application in physical unclonable functions for hardware security purposes., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Thermal study of multilayer resistive random access memories based on HfO2 and Al2O3 oxides

  • Cazorla, M.
  • Aldana, S.
  • Maestro, Marcos
  • González, M. B.
  • Campabadal, Francesca
  • Moreno, Enrique
  • Jiménez-Molinos, Francisco
  • Roldán, J.B.
An in-depth analysis including both simulation and experimental characterization of resistive random access memories (RRAMs) with dielectric stacks composed of two layers of HfO and AlO stacked in different orders is presented. The simulator, which includes the electrodes in the simulation domain, solves the 3D heat equation and calculates the device current. The results are employed to analyze thermal effects in bilayer HfO and AlO-based RRAMs with electrodes of Ni and Si-n during resistive switching (RS) operation. According to simulations and the experimental data, the narrow part of the conductive filaments (CF) is formed in the HfO layer in all the cases, and, therefore, no important differences are found in terms of reset voltage if the oxide stack order is changed with respect to the electrodes. This result is attributed to the fact that the heat flux in AlO is higher than in the HfO layer and this determines the thermal behavior and RS operation. The heat transfer rate from the conductive filament to the electrodes and the surrounding oxide has been analyzed. The lateral heat flux component from the CF to the oxide is shown to be important with respect to the vertical component (from the CF to the electrodes)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

New method to analyze random telegraph signals in resistive random access memories

  • González-Cordero, G.
  • González, M. B.
  • Jiménez-Molinos, Francisco
  • Campabadal, Francesca
  • Roldán, J.B.
A new technique to analyze random telegraph noise (RTN) is proposed. It has been used for the analysis of current versus time measurements performed on Ni/HfO/Si-n-based resistive random access memories. The method allows us to study current-time traces with a massive number of data without losing the capability of dealing with background noise and discriminating the active defects responsible for current fluctuations. A comparison of this algorithm with the previous ones is given in terms of computing time and RTN description accuracy. The computing efficiency and the validity of the model have been proved, and therefore, it is feasible to propose applications for real time analysis making use of this new algorithm., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

Electrical characterization and resistive switching behavior of HfO2/Al2O3 multilayer stacks

  • Maestro, Marcos
  • Poblador, Samuel
  • Zabala, Miguel
  • Acero Leal, María Cruz
  • González, M. B.
  • Campabadal, Francesca
Trabajo presentado en la 12th Spanish Conference on Electron Devices (CDE 2018), celebrada en Salamanca (España), del 14 al 16 de noviembre de 2018, In this work, we present the electrical characteristics of different HfO2/Al2O3 multilayer stacks in Ni-based MIS devices. An in-depth electrical characterization through the study of capacitor characteristics and resistive switching parameters has been performed. The results show that despite the number of layers and their order has an impact on the electrical characteristics of the devices, they have minor effects on the resistive switching behavior., The authors thank the support from the Spanish MINCIU and the FEDER program through projects TEC2017-84321-C4-1-R and TEC2014-54906-JIN. This work has made use of the Spanish ICTS Network MICRONANOFABS.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Contribución de congreso (ConferenceOutput)

One-way Sensitivity Analysis of the Quasi-static Memdiode Model for RRAM Devices

  • Salvador, E.
  • González, M. B.
  • Campabadal, Francesca
  • Martín-Martínez, J.
  • Rodríguez, R.
  • Miranda, E.
In this work, we assess the impact that changes in the parameters of the quasi-static memdiode model (QMM) for RRAM devices will have on the simulated conduction characteristics. Sensitivity analysis is recognized as the most important technique for identifying which parameters are key drivers of the model's results. The model's reference parameters are extracted first from a typical (median) experimental I-V curve of an electroformed Hf02-based metal-insulator-metal (MIM) structure. Then one parameter is changed at a time (so-called univariate or one-way analysis) in the LTSpice script and the variation of some selected observables recorded. Special attention is paid to the voltage span-induced sensitivity effect., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Variability estimation in resistive switching devices, a numerical and kinetic Monte Carlo perspective

  • Maldonado, D.
  • Aldana, S.
  • González Bargalló, Mireia
  • Jiménez-Molinos, F.
  • Ibáñez, M. J.
  • Barrera, D.
  • Campabadal Segura, Francesca
  • Roldán, J. B.
We have analyzed variability in resistive memories (Resistive Random Access Memories, RRAMs) making use of advanced numerical techniques to process experimental measurements and simulations based on the kinetic Monte Carlo technique. The devices employed in the study were fabricated using the TiN/Ti/HfO2/W stack. The switching parameters were obtained making use of new developed extraction methods. The appropriateness of the advanced parameter extraction methodologies has been checked by comparison to kinetic Monte Carlo simulations; in particular, the reset and set events have been studied and detected. The data obtained were employed to shed light on the resistive switching operation and the cycle-to-cycle variability. It has been shown that variability depends on the numerical technique employed to obtain the set and reset voltages, therefore, this issue must be taken into consideration in RS characterization and modeling studies. The proposed techniques are complementary and depending on the technology and the curves shape the features of a particular method could make it to be the most appropriate., The authors thank the support of the Spanish Ministry of Science, Innovation and Universities and the FEDER program through projects TEC2017-84321-C4-1-R, TEC2017-84321-C4-3-R, and projects A. TIC.117.UGR18, IE2017-5414 and B.TIC.624.UGR20 funded by the Consejería de Conocimiento, Investigaci ́on y Universidad, Junta de Andalucía (Spain) and the FEDER program. Funding for open access charge: Universidad de Granada/CBUA, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

True Random Number Generator Based on the Variability of the High Resistance State of RRAMs

  • Akbari, Maryam
  • Mirzakuchaki, Sattar
  • Arumí, Daniel
  • Manich, Salvador
  • Gómez-Pau, Alvaro
  • Campabadal, Francesca
  • González, Mireia Bargalló
  • Rodríguez-Montañés, Rosa
Hardware-based security primitives like True Random Number Generators (TRNG) have become a crucial part in protecting data over communication channels. With the growth of internet and cloud storage, TRNGs are required in numerous cryptographic operations. On the other hand, the inherently dense structure and low power characteristics of emerging nanoelectronic technologies such as resistive-switching memories (RRAM) make them suitable elements in designing hardware security modules integrated in CMOS ICs. In this paper, a memristor based TRNG is presented by leveraging the high stochasticity of RRAM resistance value in OFF (High Resistive) state. In the proposal, one or two devices can be used depending on whether the objective is focused on saving area or obtaining a higher random bit frequency generation. The generated bits, based on a combination of experimental measurements and SPICE simulations, passed all 15 National Institute of Standards and Technology (NIST) tests and achieved a throughput of tens of MHz., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Unipolar resistive switching behavior in Al2O3/HfO2 multilayer dielectric stacks: fabrication, characterization and simulation

  • Maestro-Izquierdo, Marcos
  • Gonzalez, Mireia Bargalló
  • Jiménez-Molinos, F.
  • Moreno, E
  • Roldan, J B
  • Campabadal, Francesca
In this work, the impact of different HfO2/Al2O3-based multilayer dielectric stack (DS) configurations on the electrical characteristics and on the resistive switching (RS) performance of Ni/Insulator/Silicon devices has been systematically investigated. Significant differences are observed in the electrical characteristics of the fabricated bilayer, trilayer and pentalayer stacks compared to a single HfO2 layer of the same physical thickness. The RS analysis has shown similar low resistance state currents and set voltages for all the DS combinations whereas currents at the high resistance state and reset voltages depend on the DS. The shift of the reset voltage to lower values for HfO2 and Al2O3/HfO2/Al2O3 cases is explained by the results from thermal simulations that reveal that these differences could be associated to the different temperature distributions at the narrowest part of the conductive filament immediately before the thermally triggered reset process occurs., The authors thank the support of the Spanish Ministry of Science, Innovation and Universities and the ERDF program through projects TEC2017-84321-C4-1-R, TEC2017-84321-C4-3-R. We also thank the support of FENDECYT project, reference 3180130. This work has made use of the Spanish ICTS Network MICRONANOFABS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Experimental evaluation of the dynamic route map in the reset transition of memristive ReRAMs

  • Maldonado, David
  • Gonzalez, Mireia B.
  • Campabadal, Francesca
  • Jimenez-Molinos, Francisco
  • Chawa, M. Moner Al
  • Stavrinides, Stavros G.
  • Roldan, Juan B.
  • Tetzlaff, Ronald
  • Picos, Rodrigo
  • Chua, Leon O.
In this paper, we analyze the reset transition in bipolar TiN/Ti/HfO2 (10 nm)/Al2O3(2 nm)/W ReRAM devices using a tool that allows studying the temporal behaviour of these devices. This tool, the Dynamic Route Map (DRM), provides information about the temporal evolution of the state variable that governs the behaviour of the device, thus allowing an increased insight into resistive switching processes. Here, we show that this DRM is a powerful tool, that may help explaining some non intuitive behaviours of memristors, like the difference in the reset voltage when the inputs are from different frequency or shape. Using this tool, this fact can be explained as a different trajectory on a unique surface defining the device. As a first step, we have used two different models, one based on a physical description, and another one based on the mathematical definition of memristor as a non linear relation between charge and flux. We check that similar DRM can be obtained from both models. Additionally, several series of set-reset transitions have been measured using voltage ramps of different slopes. From the measured transitions, the corresponding resistance has been extracted and, assuming conductive filaments (CF) as the switching mechanism, the corresponding CF radius has been calculated. Using these data, we show that explanations from the model are also supported when using experimental data, thus proving the validity of the approach., We thank the Spanish Ministry of Science for Projects DPI2017-86610-P, TEC2017-84877-R, TEC2017-84321-C4-1-R, and TEC2017-84321-C4-3-R (also supported by the FEDER program). This work has made use of the Spanish ICTS Network MICRONANOFABS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Current transient response and role of the internal resistance in HfO<inf>x</inf>-based memristors

  • Gonzalez, Mireia Bargalló
  • Maestro-Izquierdo, Marcos
  • Jiménez-Molinos, F.
  • Roldán, J. B.
  • Campabadal, Francesca
Filamentary-type valence change memristors based on HfO2 are currently being explored as potential candidates to emulate the synaptic functionality of biological inspired neuromorphic circuits due to their ability to tune their resistance state (synaptic weight) needed to optimize their learning mechanisms. In this paper, the resistive switching dynamics associated with the electric field and temperature-assisted oxygen vacancy/ion migration, generation, and recombination processes is investigated in-depth through current transient experiments. Special attention is given to the influence of the intrinsic series resistance and applied voltage on the switching speed and on the abrupt or gradual resistance modulation capability, providing a deeper insight into the key parameters that have a crucial influence in the SET and RESET transitions and can strongly impact the programming energy consumption of redox-based HfO2-memristors., This work was partially funded by the Spanish Ministry of Science and Innovation and the ERDF program through Project Nos. TEC2017-84321-C4-1-R and TEC2017-84321C4-3-R. The support of FENDECYT project, Reference No. 3180130, is also acknowledged. This work has made use of the Spanish ICTS Network MICRONANOFABS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Neural network based analysis of random telegraph noise in resistive random access memories

  • González-Cordero, G.
  • González, Mireia Bargalló
  • Morell, A.
  • Jiménez-Molinos, F.
  • Campabadal, Francesca
  • Roldán, J. B.
The characterization of random telegraph noise (RTN) signals in resistive random access memories (RRAM) is a challenge. The inherent stochastic operation of these devices, much different to what is seen in other electron devices such as MOSFETs, diodes, etc, makes this issue more complicated from the mathematical viewpoint. Nevertheless, the accurate modeling of these type of signals is essential for their use in digital and analog applications. RTN signals are revealed to be linked to the emission and capture of electrons by traps close to the conductive filament that can influence resistive switching operation in RRAMs. RTN features depend on the number of active traps, on the interaction between these traps at different times, on the occurrence of anomalous effects, etc Using a new representation technique, the locally weighted time lag plot (LWTLP), a highly efficient method in terms of computation, data from current-time (I-t) traces can be represented with a pattern that allows the analysis of important RTN signal features. In addition, self-organizing maps, a neural network devoted to clustering, can be employed to perform an automatic classification of the RTN traces that have similar LWTLP patterns. This pattern analysis allows a better understanding of RTN signals and the physics underlying them. The new technique presented can be performed in a reasonable computing time and it is particularly adequate for long (I-t) traces. We introduce here this technique and the most important results that can be drawn when applied to long RTN traces experimentally obtained in RRAMs., The authors thank the support of the Spanish Ministry of Science and Universities and the FEDER program through projects TEC2017-84321-C4-1-R, TEC2017-84321-C4-3-R, TEC2017-84321-C4-4-R. This work has made use of the Spanish ICTS Network MICRONANOFABS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publication Artículo científico (JournalArticle)

Application of the Clustering Model to Time-Correlated Oxide Breakdown Events in Multilevel Antifuse Memory Cells

  • Gorriz, Jordi Munoz
  • Gonzalez, Mireia Bargallo
  • Campabadal, Francesca
  • Sune, Jordi
  • Miranda, Enrique A.
Time statistics for successive breakdown (BD) events in Al2O3/HfO2-based nanolaminates aimed to the development of multilevel one-time programmable (OTP) memory cells is investigated. The clustering model is shown to account for the departure of the experimental data from the standard Weibull model attributed to the initial leakage current dispersion. An equivalent electrical circuit model is used to represent the stepwise current increase triggered by the appearance of multiple BD sites. Correlation effects in the order statistics are ascribed to a reduction of the effective stress voltage caused by the presence of a series resistance. It is shown that the E -model acceleration law for dielectric BD is consistent with the data obtained from our antifuse cells., Manuscript received October 2, 2020; revised October 21, 2020; accepted October 22, 2020. Date of publication October 26, 2020; date of current version November 24, 2020. This work was supported in part by the Spanish Ministry of Science, Innovation, and Universities and in part by the Fondo Europeo de Desarrolllo Regional (FEDER) Program under Project TEC2017-84321-C4-1-R and Project TEC2017-84321-C4-4-R. The review of this letter was arranged by Editor U. Ganguly. (Corresponding author: Jordi Muñoz Gorriz.) Jordi Muñoz Gorriz, Jordi Suñé, and Enrique A. Miranda are with the Departament d’Enginyeria Electrònica, Universitat Autònoma de Barcelona, 08193 Cerdanyola del Vallès, Spain (e-mail: jordi.munoz.gorriz@uab.cat)., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publication Artículo científico (JournalArticle)

Unpredictable bits generation based on RRAM parallel configuration

  • Arumi Delgado, Daniel|||0000-0002-6638-7485
  • Gómez Pau, Álvaro|||0000-0002-7774-1662
  • Manich Bou, Salvador|||0000-0001-5265-1209
  • Rodríguez Montañés, Rosa|||0000-0001-6231-0862
  • Bargalló, Mireia
  • Campabadal, Francesca
In this letter a cell with the parallel combination of two TiN/Ti/HfO2/W resistive random access memory (RRAM) devices is studied for the generation of unpredictable bits. Measurements confirm that a simultaneous parallel SET operation in which one of the two RRAMs switches to the low resistance state (LRS) is an unpredictable process showing random properties for different sets of cells. Furthermore, given a device pair, the same device switches during subsequent write operations. The proposed cell is also analyzed under different current compliances and pulse widths with the same persistent behavior being observed. The features of the proposed cell, which provide data obfuscation without compromising reliability, pave the way for its application in Physical Unclonable Functions (PUFs) for hardware security purposes., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publication Artículo científico (JournalArticle)

Unpredictable bits generation based on RRAM parallel configuration

  • Arumi Delgado, Daniel
  • Gómez Pau, Álvaro
  • Manich Bou, Salvador
  • Rodríguez Montañés, Rosa
  • Bargalló, Mireia
  • Campabadal, Francesca
In this letter a cell with the parallel combination of two TiN/Ti/HfO2/W resistive random access memory (RRAM) devices is studied for the generation of unpredictable bits. Measurements confirm that a simultaneous parallel SET operation in which one of the two RRAMs switches to the low resistance state (LRS) is an unpredictable process showing random properties for different sets of cells. Furthermore, given a device pair, the same device switches during subsequent write operations. The proposed cell is also analyzed under different current compliances and pulse widths with the same persistent behavior being observed. The features of the proposed cell, which provide data obfuscation without compromising reliability, pave the way for its application in Physical Unclonable Functions (PUFs) for hardware security purposes., Peer Reviewed, Postprint (author's final draft)
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Self-organizing neural networks based on OxRAM devices under a fully unsupervised training scheme

  • Pedro, Marta|||0000-0003-0317-7373
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Maestro Izquierdo, Marcos|||0000-0002-8940-9050
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
A fully-unsupervised learning algorithm for reaching self-organization in neuromorphic architectures is provided in this work. We experimentally demonstrate spike-timing dependent plasticity (STDP) in Oxide-based Resistive Random Access Memory (OxRAM) devices, and propose a set of waveforms in order to induce symmetric conductivity changes. An empirical model is used to describe the observed plasticity. A neuromorphic system based on the tested devices is simulated, where the developed learning algorithm is tested, involving STDP as the local learning rule. The design of the system and learning scheme permits to concatenate multiple neuromorphic layers, where autonomous hierarchical computing can be performed.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A flexible characterization methodology of RRAM, application to the modeling of the conductivity changes as synaptic weight updates

  • Pedro, Marta|||0000-0003-0317-7373
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Nafria, Montserrat|||0000-0002-9549-2890
In this work, an automatic and flexible measurement setup, which allows a massive electrical characterization of single RRAM devices with pulsed voltages, is presented. The evaluation of the G-V maps under single-pulse test-schemes is introduced as an example of application of the proposed methodology, in particular for neuromorphic engineering, where the fine analog control of the synaptic device conductivity state is required, by inducing small changes in each learning iteration. To describe the obtained data, a time-independent compact model for memristive devices is used. The fitting parameters statistical distributions are further studied.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

A simple, robust, and accurate compact model for a wide variety of complementary resistive switching devices

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
Complementary Resistive Switching (CRS) using memristive devices has been intensively investigated in the last decade. The objective of CRS is to generate low and high resistance windows in the I-V characteristic of the selector device with the aim of reducing the sneak-path conduction problem in crossbar arrays. Though a wide variety of compact models for CRS have been proposed, the one presented here stands out for its simplicity, robustness, and accuracy. The flexibility of the memdiode model is demonstrated through a series of fitting exercises using experimental data found in the literature. The model script for the LTSpice XVII simulator is also provided.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

SPICE modeling of cycle-to-cycle variability in RRAM devices

  • Salvador Aguilera, Emili|||0000-0002-1613-6784
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Miranda, E.|||0000-0003-0470-5318
In this work, we investigated how to include uncorrelated cycle-to-cycle (C2C) variability in the LTSpice quasi-static memdiode model for RRAM devices. Variability in the I-V curves is first addressed through an in-depth study of the experimental data using the fitdistrplus package for the R language. This provides a first approximation to the identification of the most suitable model parameter distributions. Next, the selected candidate distributions are incorporated into the model script and used for carrying out Monte Carlo simulations. Finally, the experimental and simulated observables (set and reset currents, transition voltages, etc.) are statistically compared and the model estimands recalculated if it is necessary. Here, we put special emphasis on describing the main difficulties behind this seemingly simple procedure.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

An unsupervised and probabilistic approach to Pavlov's dog experiment with OxRAM devices

  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Nafria, Montserrat|||0000-0002-9549-2890
  • Pedro, Marta|||0000-0003-0317-7373
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
In this work, a potential basis for implementing unsupervised associative learning in two or more memristors within neuromorphic architectures is proposed. The experimental demonstration is carried out by means of emulating the Pavlov's dog classical conditioning experiment with two OxRAM devices, in which the dependence of the probability of association on test parameters, such as the pulse amplitude, is studied.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

SPICE model for complementary resistive switching devices based on anti-serially connected quasi-static memdiodes

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
This paper reports the use of the Quasi-static Memdiode Model (QMM) for simulating Complementary Resistive Switching (CRS) devices. CRS arises from the anti-serial connection of two memristors and it is used for generating low and high-resistance regions in the I-V characteristic with the aim of mitigating the sneak-path conduction problem in crossbar arrays. Here, the use of the QMM for CRS in the form of a six terminal subcircuit is explored. While two terminals of the subcircuit correspond to the conventional input and output pins of the CRS structure, the rest provide information about the voltage at the central node, the low-voltage conductance of each device, and the low-voltage conductance of the whole structure. Special attention is paid to the simulation of the so-called table with legs hysteresis loop (resistance at fixed bias vs. write voltage), which is often invoked in connection with devices that exhibit switching activity at the two interfaces of a single dielectric layer. Because of the internal potential drop distribution, the switching process takes place alternately at one side of the structure or the other giving rise to a pseudo-CRS behavior. The flexibility of the proposed approach is demonstrated through a series of fitting exercises that involve experimental data reported in the literature. The model script for the SPICE simulator is also provided.
Dipòsit Digital de Documents de la UAB
Publication Artículo científico (JournalArticle)

Neural network based analysis of random telegraph noise in resistive random access memories

  • González-Cordero, Gerardo|||0000-0002-5627-9827
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Morell, Antoni|||0000-0003-2249-8594
  • Jiménez-Molinos, Francisco|||0000-0002-8866-7568
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Roldán, Juan B.|||0000-0003-1662-6457
The characterization of random telegraph noise (RTN) signals in resistive random access memories (RRAM) is a challenge. The inherent stochastic operation of these devices, much different to what is seen in other electron devices such as MOSFETs, diodes, etc, makes this issue more complicated from the mathematical viewpoint. Nevertheless, the accurate modeling of these type of signals is essential for their use in digital and analog applications. RTN signals are revealed to be linked to the emission and capture of electrons by traps close to the conductive filament that can influence resistive switching operation in RRAMs. RTN features depend on the number of active traps, on the interaction between these traps at different times, on the occurrence of anomalous effects, etc Using a new representation technique, the locally weighted time lag plot (LWTLP), a highly efficient method in terms of computation, data from current-time (I-t) traces can be represented with a pattern that allows the analysis of important RTN signal features. In addition, self-organizing maps, a neural network devoted to clustering, can be employed to perform an automatic classification of the RTN traces that have similar LWTLP patterns. This pattern analysis allows a better understanding of RTN signals and the physics underlying them. The new technique presented can be performed in a reasonable computing time and it is particularly adequate for long (I-t) traces. We introduce here this technique and the most important results that can be drawn when applied to long RTN traces experimentally obtained in RRAMs.