Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Comparative study on bubbling and shearing techniques for the crystallization of xylitol in TES systems

  • Navarro, Miguel
  • Diarce, Gonzalo
  • Lázaro, Ana
  • Rojo, Ander
  • Delgado, Mónica
Xylitol is a promising phase change material for thermal energy storage at low and medium temperatures, but its supercooling and low crystallization rate can hinder its performance in actual systems. This problem can be overcome with the application of external stimuli that promotes the nucleation and subsequent crystallization of the supercooled xylitol. Seeding combined with mechanical stirring or air-bubbling, the techniques used in this study, are proven to achieve the crystallization (and the release of the stored latent heat) of xylitol, but the effect was not instantaneous. Rheological measurements were performed firstly to study the influence of shear and temperature in the crystallization of xylitol. Then, the use of different mechanisms to promote the crystallization of the material was evaluated by two different laboratory-scale prototypes; one of them included a mechanical stirring system while the other employed a gas-bubbling mechanism. Thermal power and discharged energy of xylitol were evaluated in the bubbling system prototype and the influence of supercooling in both discharged power and energy were also studied. A methodology to calculate induction time is proposed to evaluate crystallization systematically in both systems. This new systematic evaluation proposed in this work is different from that of the literature and aims to be used to compare different crystallization systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Humberto Santos - Identifying the environmental hotspots in the production of xylitol to be used as a phase change material

  • Da Silva Santos, Humberto
  • Guillén Lambea, Silvia
Life cycle assessment (LCA) allows the quantification of environmental impacts of the complete life cycle of a product. In line with initiatives to decarbonize the energy sector by using thermal energy storage systems, the objective is to compare the environmental impacts of the chemical and biotechnological production processes of xylitol and identify the environmental hotspots.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Reseña (Review)

Environmental assessment of xylitol production routes for thermal energy storage applications: A critical review

  • Santos, Humberto
  • Guillen-Lambea, Silvia
Studies show xylitol as a promising material for thermal energy storage applications. This work aims to critically review, collect, and produce useful data about the life cycle impacts of xylitol's production. One of the practical implications of this work is that it allows the identification of inputs that require attention in decision-making according to various environmental impact indicators. The methodology included a review of the production pathways and market, a systematic review, and a life cycle assessment comparing the production routes. The systematic review showed great variability in the global warming potential regardless of the production pathway, biotechnological or chemical, associated with life cycle assessment assumptions, making a fair comparison between both production processes unfeasible. Thus, a life cycle assessment was conducted with the same assumptions for farming, transportation, and manufacturing stages, finalizing with a local sensitivity analysis to identify the critical inputs. Manufacturing in the chemical process contributes to more than 75 % of the environmental impacts compared to farming and transportation, except for water consumption potential (m3). A breakdown of the manufacturing flows shows that energy usage for the biotechnological process, and energy plus nickel catalyst for the chemical process are the key contributors, confirmed by the local sensitivity analysis. Overall, the biotechnological process showed a global warming potential of 2.2 kg CO2 eq per kg of xylitol. In comparison, the chemical process had a value of 8.8 kg CO2 eq per kg of xylitol, and the same behavior is observed on most of the impact category indicators.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Rheological study on xylitol crystallization for its use as phase change material: analytical and statistical analysis

  • Navarro, Miguel
  • Gracia, Zeus
  • Asín, Jesús
  • Lázaro, Ana
  • Martí, Marta
  • Delgado, Mónica
In a global context in which decarbonization of society is wanted through the use of renewable sources, energy storage plays a fundamental role. Among the different forms of energy storage that exists, this work focuses on latent heat energy storage (LHTES) for medium-low temperatures, between 70 °C and 120 °C. Xylitol, a sugar-alcohol, is a promising phase change material (PCM) due to its low cost, low corrosivity, high latent heat (240 J/g) and a melting temperature of 92 °C. However, its use as PCM is hindered by a high degree of supercooling and a low crystallization rate. To address these challenges, this work used a seeding and shearing technique to trigger crystallization. Rheological experiments were performed to monitor viscosity changes during crystallization, in order to study the crystallization induction time. The systematic analysis included the effects of temperature (70–90 °C), shear rate(1-100s−1), and seed crystal size (300–400 μm and 600–700 μm). Key results show that temperature is the most dominant factor. The shortest induction time at 70 °C was found at 10s, increasing to 1500s at 90 °C. Increasing seed size and reducing the rheometer gap also shortened induction times, while shear rate had minimal influence, likely due to non-uniform shear during the test. For practical applications, operating at 80 °C is recommended to balance induction time and energy loss due to supercooling. Optimizing shear-triggered mechanism, such as stirred tanks designs, can improve crystallization controllability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Environmental impacts of latent heat thermal energy storage systems

  • Santos, Humberto
  • Lázaro Fernández, Ana
  • Guillen Lambea, Silvia
Latent thermal energy storage integrated into energy systems can be a solution to the intermittency of renewable energies. The objective of this work is to investigate how operational parameters and phase change material properties influence the environmental impacts of thermal energy storage systems through a proposed mathematical correlation, thereby enabling informed decisions in the thermal energy storage sector.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Uncertainty Propagation and Input Sensitivity in Life Cycle Assessment: An Application to Phase Change Materials

  • Santos, Humberto
  • Guillén-Lambea, Silvia
Global and local sensitivity analyses are essential for identifying key parameters in life cycle assessment models. However, due to limited information on parameter uncertainty, they are often overlooked. This paper’s objective is to address this gap by proposing a methodological framework for defining input sensitivity, for midpoint and end point indicators, and a quantitative approach for determining input uncertainties. Applied to a case study on xylitol production as a phase change material, the methodology uses Monte Carlo for uncertainty propagation and Python’s SALib to calculate Sobol indices. Results show a 2% relative error in midpoint indicators, aligning with pedigree matrix methods. While accuracy depends on choosing the appropriate distribution function, both global and local sensitivity analyses showed consistent outcomes. This structured, user-friendly approach offers decision-makers a simplified yet effective way to prioritize inputs, either by verifying multiple indicators individually or focusing on damage-oriented indicators. Future studies could refine database coefficients and explore their influence on overall uncertainty, as well as the nonlinearity of the model if the parameters are correlated, offering opportunities to enhance accuracy.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Polysaccharide–protein complex-stabilized Pickering phase change material emulsions for low-temperature thermal energy storage

  • Yu, Tingting
  • Qiu, Xiaolin
  • Delgado, Mónica
  • Lázaro, Ana
  • Hu, Yang
Low-temperature phase change material emulsions (PCMEs) are excellent thermal storage media but have environmental and toxicity issues due to poorly degradable synthetic surfactants; single-component biopolymer systems lack stability, low-temperature Pickering emulsion research is scarce, protein-polysaccharide composite stabilizers in PCMEs are unreported, and Boron Nitride (BN) -biopolymer synergistic effects on supercooling remain unexplored. This study aims to develop an environmentally friendly, high-performance, low-temperature Pickering phase change material emulsion to simultaneously optimize stability, environmental compatibility, and thermal performance. This study proposes substituting traditional emulsifiers with self-assembled sodium caseinate (SC)-xanthan gum (XG) nanocomposites. Phase change emulsions were prepared by high-speed homogenization, and boron nitride was added to synergistically reduce supercooling and improve heat transfer. The SC–XG complexes adsorb at n-tetradecane/water interfaces, forming a viscoelastic interfacial network that enhances droplet stability and restricts coalescence. Thermal analysis revealed that, at 0.5% (w/v) XG, the 50 vol% n-tetradecane PCME droplets are uniform and kinetically stable, delivering a latent heat of 89.5 J g− 1. Adding only 0.75 wt% BN induces heterogeneous nucleation, cuts supercooling from 7.8 ◦C to 0.24 ◦C, and boosts thermal conductivity. This study proposes a novel protein-polysaccharide-based technical pathway for constructing green and sustainable low-temperature thermal storage materials, while also synergistically regulating the crystallization behavior and heat transfer performance of the emulsion through BN. This study provides both a theoretical foundation and a green technical solution for designing stable and efficient phase change material emulsions for thermal energy storage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sustainable Peg‐Based Shape‐Stabilized Phase Change Materials Using Raw Pine Cone as a Low‐Cost Filler and Graphite for Enhanced Thermal Conductivity

  • Akrouti, Amira
  • Trigui, Abdelwaheb
  • Delgado, Mónica
  • Navarro, Miguel
  • Lazaro, Ana
  • Hassani, Rym
This study investigates the development of a novel shape‐stabilized phase change material (ssPCM). Pinecone (PC) powder, a low‐cost and sustainable lignocellulosic support, was combined with polyethylene glycol (PEG 6000) as the phase change material (PCM). Graphite was incorporated to enhance thermal conductivity, minimize leakage, and improve shape stability. Thermophysical properties were evaluated to assess the potential of these ssPCM as thermal energy storage (TES) materials. The Fourier transform infrared spectroscopy (FTIR) was used to verify the chemical compatibility among components, and thermogravimetric analysis (TGA/DTG) to evaluate thermal stability and decomposition behavior. Brunauer–Emmett–Teller (BET) surface area, mercury intrusion porosimetry (MIP), and field emission scanning electron microscopy (FESEM) were conducted to investigate the structure of the PC support and its influence on ssPCMs. Density was measured using a thermomechanical analyzer (TMA), while thermal diffusivity was determined with a laser flash apparatus (LFA). Among the prepared composites, 80% PEG, 10% G, 10% PC showed the most promising thermal storage performance, with a latent heat of 153.7 kJ/kg by differential scanning calorimetry (DSC) and 207.3 kJ/kg by the T‐history method. Preliminary results suggest that these ssPCM offer a cost‐effective and reliable solution for TES applications, combining eco‐friendly materials with enhanced thermal, structural, and thermophysical performance.