Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Environmental assessment of central solar heating plants with seasonal storage located in Spain

  • Raluy, Rosa Gemma
  • Guillén-Lambea, Silvia
  • Serra, Luis M.
  • Guadalfajara, Mateo
  • Lozano, Miguel A.
Renewable energies can play a very important role in the development of a new energy model contributing effectively towards a more sustainable development in the mid and long term. In this context Central Solar Heating Plants with Seasonal Storage (CSHPSS) are able to provide space heating and Domestic Hot Water (DHW) to residential buildings with high solar fractions (>50%). These systems are already being used in Central and Northern Europe, as well as in Canada, where there is an important experience in district heating systems. The study presented herein presents an environmental assessment, applying the Life Cycle Assessment (LCA) method, of a CSHPSS, which should cover the space heating and DHW demand of 500 dwellings of 100 m2, located in Zaragoza, Spain. Environmental burdens through the life cycle of the system are estimated based on greenhouse gas emissions, and comprehensive environmental indicators as the ReCiPe and Cumulative Energy Demand (CED). These indicators allow to evaluate the reduction of the environmental load achieved by the CSHPSS analyzed with respect to conventional space heating and DHW systems, as well as to identify the most critical aspects from the environmental perspective. In this article, the environmental behavior of the CSHPSS is decoupled into the two demands covered, heating and DHW, in order to quantify the environmental impact of each generation system. A detailed life cycle inventory is presented with the aim of promoting the development of increasingly efficient technologies from the environmental point of view, not only in the operation phase but also in the construction of the equipment. Furthermore, an in-depth analysis is performed to evaluate the variation of the environmental impact depending on the climatic conditions. The CSHPSS is also dimensioned in different Spanish cities and a LCA is carried out for nine locations. The results can help different stakeholders to make decisions in order to optimize the renewable energy generation systems taking in account its whole life cycle and to point out the necessity to evaluate the environmental impact essentially in the production phase for all renewable energy systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal design of trigeneration systems for buildings considering cooperative game theory for allocating production cost to energy services

  • Lozano, Miguel A.
  • Serra, Luis M.
  • Pina, Eduardo A.
In the design of trigeneration plants for buildings, two fundamental issues must be addressed: the synthesis of the plant configuration (installed technologies and capacity, etc.) and the operational planning. Given the variety of technology options available and great diurnal and annual fluctuations in energy demands, finding the optimal supply system of energy services is a complex task. Cost allocation in multi-product systems requires special attention because the way in which allocation is made will affect the prices of the final products and, consequently, the consumers' behaviour. When a polygeneration plant is designed to serve different products, it is possible to achieve a lower total cost. However, if potential consumers are free to participate, the system's management should ensure that every participant shares the benefit of joint production. In trigeneration systems this implies that all consumers should achieve, at least, a lower cost for their demanded energy services than operating separately. The present work proposes a Mixed Integer Linear Programming model to determine the optimal configuration of trigeneration systems that must cover the energy demands of electricity, heating and cooling of a residential complex located in Zaragoza, Spain. The model considers the possibility of using a set of proposed alternative technologies within a superstructure and considers the optimal operation throughout a typical meteorological year. The objective function to be minimized is the total annual cost. The results indicate that compared to consumers standing alone, the optimal trigeneration system can achieve 10.6% cost saving. Ten different cost assessment methods to the three final energy products of the analyzed trigeneration system are rigorously compared. Cooperative game theory shows that all consumers benefit. Using the Shapley values as the distribution criterion, the savings for electricity, heating and cooling consumers are 4.8%, 20.9% and 11.1%, respectively.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Opportunities and economic assessment for a third-party delivering electricity, heat and cold to residential buildings

  • Pinto, Edwin S.
  • Gronier, Timothé
  • Franquet, Erwin
  • Serra, Luis M.
In the present context of energy transition towards a carbon neutral society, residential sector plays an important role to combat climate change since it represents about 40% of the global final energy consumption and 30% of direct CO2eq emissions in the European Union. Polygeneration systems, facilitating the integration of renewable energies, are a feasible alternative enabling efficient use of natural resources with low environmental impact. This work analyzes the economic viability, in terms of net present value (NPV), and environmental benefit (CO2eq emissions) of an energy supplier company playing the role of an aggregator for both demand and supply. As an owner of a polygeneration system, optimally designed through a MILP approach, it delivers various energy services (electricity, space heating, domestic hot water and cold) to several customers (50 dwellings). The analysis is performed, considering three different business models, in two different locations, Zaragoza (Spain) and Marseille (France), with different energy demands, energy mixes and energy regulations. The optimal configuration obtained, consisting of cogeneration module, PV, reversible heat pump, boiler and thermal energy storage has shown to be very resilient and cost-effective in the scenarios analyzed. Results indicate that the proposed scheme represents an added value for both the supplier company (aggregator), with a positive, and the final customers (owing savings greater than 30%), with significant reduction of CO2eq emissions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Life cycle assessment of power generation systems in Spain: Exploring a broader view from a consequential perspective

  • Guillén-Lambea, Silvia
  • Abrahão, Raphael
  • Carvalho, Monica
Developing new clean power generation systems is a research priority for the energy sector, and selection should be based on environmental performance over the entire lifetime. Consequential Life Cycle Assessment evaluates the consequences of this selection and provides environmental data to support decision-making. This research uses a consequential approach to assess the environmental impacts of two medium power generation systems. The selected environmental impact assessment methods are IPCC 2013 GWP 100y and ReCiPe 2016. Moreover, the work describes a methodology for finding the marginal mix technologies for electricity and cooling energy production depending on the time horizon. The positive environmental consequences associated with short-term marginal energy mixes (electricity and cooling) progressively disappear when the marginal energy mix varies throughout time. The environmental results strongly depend on the marginal mix of technologies and evidence the necessity to develop methodologies and standards to improve the robustness of environmental assessments. A new line of discussion is opened concerning the temporal variation of environmental impacts of an energy production system, which could also be considered in Attributional Life Cycle Assessments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Multi-objective optimization of an energy community powered by a distributed polygeneration system

  • De Souza, Ronelly José
  • Reini, Mauro
  • Serra, Luis M.
  • Lozano, Miguel A.
  • Nadalon, Emanuele
  • Casisi, Melchiorre
This paper presents a multi-objective optimization model for the integration of polygeneration systems into energy communities (ECs), by analyzing a case study. The concept of ECs is increasingly seen as beneficial for reducing global energy consumption and greenhouse gas emissions. Polygeneration systems have the potential to play a crucial role in this context, since they are known for producing multiple energy services from a single energy resource, besides the possibility of being fed also by renewable energy sources. However, optimizing the configuration and operation of these systems within ECs presents complex challenges due to the variety of technologies involved, their interactions, and the dynamic behavior of buildings. Therefore, the aim of this work is developing a mathematical model using a mixed integer linear programming (MILP) algorithm to optimally design and operate polygeneration systems integrated into ECs. The model is applied to a case study of an EC comprising nine buildings in a small city in the northeast of Italy. The work rests on the single- and multi-objective optimization of the polygeneration systems taking into account the sharing of electricity among the buildings (both self-produced and/or the purchased from the grid), as well as the sharing of heating and cooling between the buildings through a district heating and cooling network (DHCN). The main results from the EC case study show the possibility of reducing the total annual CO2 emissions by around 24.3% (about 1.72 kt CO2/year) while increasing the total annual costs by 1.9% (about 0.09 M€/year) or reducing the total annual costs by 31.9% (about 1.47 M€/year) while increasing the total annual CO2 emissions by 2.2% (about 0.16 kt CO2/year). The work developed within this research can be adapted to different case studies, such as in the residential–commercial buildings and industrial sectors. Therefore, the model resulting from this work constitutes an effective tool to optimally design and operate polygeneration systems integrated into ECs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Use of a low-cost phase change material emulsion in de-centralized thermal energy storage for district heating network enlargement

  • Rinaldi, Giulia
  • Lázaro, Ana
  • Delgado, Mónica
  • Marín, José María
  • Verda, Vittorio
A detailed heat transfer model of a storage tank was developed to assess the performance of a district heating system with de-centralized storage solutions. The performance of two cases, with water and a low-cost phase change material emulsion as storage medium was analysed for 40 residential buildings in Zaragoza (Spain). The chosen configuration is a typical cylindrical tank with internal coils through which the district heating water flows for the charge and discharge. This decentralized thermal energy storage unit reduced peak demand and mass flow in the network, allowing additional buildings to connect to a saturated grid. Four configurations were examined: (1) A 180 m3 water tank reduced district heating power demand by 36.6 %. (2) The same 180 m3 tank using the emulsion required fewer coils, lowering costs, stabilizing TES temperature, and increasing water supply temperature, thus extending system lifespan. (3) A 130 m³ tank with the emulsion offered operational characteristics similar to the water tank, with economic and structural benefits from reduced size. (4) An 180 m³ optimised tank with the emulsion achieved a 38.8 % reduction in district heating power demand. These configurations demonstrate the efficiency and cost-effectiveness of using phase change material emulsion in thermal energy storage systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Energy communities approach applied to optimize polygeneration systems in residential buildings: Case study in Zaragoza, Spain

  • Pinto, E. S.
  • Serra, L. M.
  • Lázaro, A.
The residential sector plays an important role to combat climate change. It requires alternatives to reduce its energy consumption and greenhouse gases emissions. Thus, polygeneration systems are a suitable alternative enabling efficient use of natural resources with low environmental impact. On the other hand, microgrids are considered a key component for improving power reliability and quality, besides they offer resilient and viable solution for integrating renewable energy sources at a large scale. Accordingly, this paper proposes an approach for the design of polygeneration systems for residential buildings considering them not only as a microgrid but as a smart energy system. A Mixed Integer Linear Programming (MILP) model was developed for the optimization of polygeneration systems considering different constraints which allow the energy system to work as a microgrid. Different thermal and electrical technologies where evaluated under different conditions, finding affordable and sustainable configurations and interesting synergies between technologies. Results show the importance to consider both thermal and electrical demands and technologies simultaneously for the design of energy systems. It is highlighted the displacement of batteries by thermal energy storage to achieve more cost-effective solutions in contrast to the current tendency to uphold battery systems as the key for future energy systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Rheological study on xylitol crystallization for its use as phase change material: analytical and statistical analysis

  • Navarro, Miguel
  • Gracia, Zeus
  • Asín, Jesús
  • Lázaro, Ana
  • Martí, Marta
  • Delgado, Mónica
In a global context in which decarbonization of society is wanted through the use of renewable sources, energy storage plays a fundamental role. Among the different forms of energy storage that exists, this work focuses on latent heat energy storage (LHTES) for medium-low temperatures, between 70 °C and 120 °C. Xylitol, a sugar-alcohol, is a promising phase change material (PCM) due to its low cost, low corrosivity, high latent heat (240 J/g) and a melting temperature of 92 °C. However, its use as PCM is hindered by a high degree of supercooling and a low crystallization rate. To address these challenges, this work used a seeding and shearing technique to trigger crystallization. Rheological experiments were performed to monitor viscosity changes during crystallization, in order to study the crystallization induction time. The systematic analysis included the effects of temperature (70–90 °C), shear rate(1-100s−1), and seed crystal size (300–400 μm and 600–700 μm). Key results show that temperature is the most dominant factor. The shortest induction time at 70 °C was found at 10s, increasing to 1500s at 90 °C. Increasing seed size and reducing the rheometer gap also shortened induction times, while shear rate had minimal influence, likely due to non-uniform shear during the test. For practical applications, operating at 80 °C is recommended to balance induction time and energy loss due to supercooling. Optimizing shear-triggered mechanism, such as stirred tanks designs, can improve crystallization controllability.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Data-driven characterization of start-up thermal response for optimal HVAC operation in tertiary buildings

  • García-Monge Rábanos, M.
  • Guillén-Lambea, S.
  • Zalba, B.
This paper presents a methodology for analysing the thermal behaviour of tertiary buildings under intermittent heating schedules aligned with occupancy patterns. The approach aims to enable more efficient, dynamic HVAC operation based on a data-driven model. A central component of the methodology is the characterization of the coupled building-HVAC thermal response upon system activation, determined through a systematic analysis of start-up events from historical sensor data. Validated across 62 buildings and almost 1,500 temperature sensors at the University of Zaragoza during the 2024–2025 heating season (October to April), the analysis revealed substantial variations in thermal response rates, varying tenfold from 0.3 to 3.0 °C/h. This heterogeneity confirms that the existing uniform, campus-wide HVAC schedule is suboptimal and demonstrates the necessity of personalized start-up strategies, according to the distinct thermal dynamics of each building. The results have provided a clearer picture of the combined behaviour of the building, HVAC system, and climate, particularly during the preheating phase. The findings highlight the potential of this data-driven approach to support customized HVAC control strategies to ensure thermal comfort while reducing energy consumption. Crucially, this work addresses the implementation gap frequently reported in the literature, where sophisticated theoretical models remain incompatible with conventional building control systems. By prioritizing empirical validation over simulation, the proposed methodology offers a practical and readily deployable alternative to static, pre-defined control schedules that continue to dominate the existing building stock due to technological inertia.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Environmental assessment of medium-size solar organic Rankine Cycle cogeneration plants

  • Guillén-Lambea, S.
  • Pina, E.A.
  • Serra, L.M.
  • Lozano, M.A.
  • Lazaro, A.
The development of new clean energy production systems is one of the research priorities in the energy sector. There are numerous works that evaluate the efficiency of new energy production plants from the environmental point of view. Among them, large-scale Concentrated Solar Power plants occupy a relevant place. However, medium-size plants, between 100 KW and 10 MW, have not been evaluated as intensively, resulting in a lack of knowledge in the estimation and dissemination of inventory data and environmental assessments, especially those including Organic Rankine Cycle (ORC). This work evaluates the environmental impacts caused by two solar ORC cogeneration plants that supply electrical and cooling energy for a shopping centre located in Zaragoza (Spain), using the Life Cycle Assessment methodology. One system is hybridized with a biomass boiler and the ORC operates at full load, the second one is not hybridized and the ORC can operate at partial load depending the availability of the solar energy. The selected life cycle impact assessment methods are Global Warming Potential, ReCiPe 2016, and Cumulative Energy Demand. The results allow for evaluating and comparing the environmental loads of the two medium size cogeneration systems in order to help different stakeholders to make well-informed decisions with regard to the environment. The system without hybridization presents better environmental performance in all the applied methods, 76.7 % of CO<inf>2</inf> emissions, 67.5% of environmental impacts according to ReciPe and 5.7% of cumulative energy demand with respect to the system with hybridization. The findings show the importance of the impacts caused during the manufacturing phase of the equipment, which are more relevant than those produced during the operation phase of the plants for all environmental indicators analysed.