Skip to main content

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal modes of operation and product cost allocation in sugarcane steam cogeneration plants

  • Lozano, Miguel A.
  • Santos, Rodrigo dos
  • Santos, José J.C.S.
  • Serra, Luis M.
Sugar and ethanol production from sugar cane is one of the most competitive sectors of Brazil’s economy. The bagasse generated during the production process is used as fuel in cogeneration plants that provide thermal and electrical energy to the process. In the last decades, many sugar cane factories have produced a surplus of electricity that may be sold to the grid as a new product. This paper applies energy billing optimization and thermoeconomic analysis to a sugarcane steam cogeneration plant to determine the optimal operating mode of the plant, unveils the cost formation process of its internal products (refinery heat, process heat, and consumed electricity), and examines how the results are affected by: (i) the demand for the plant’s energy services, (ii) the availability of bagasse, and (iii) the selling price of surplus electricity. The thermoeconomic analysis involves a detailed study of the cost formation process, which is achieved through the decomposition of the steam cycle of the cogeneration plant into subcycles. Three main subcycles, in addition to the deaeration cycle and other auxiliary subcycles, have been identified: the cogeneration cycle generating work in the high-pressure turbine and refinery heat (subcycle one), the cogeneration cycle generating work in the high- and medium-pressure turbines and process heat (subcycle two), and the condensing cycle that generates only work in the high-, medium-, and low-pressure turbines (subcycle three). These subcycles make up the productive structure of the steam cogeneration plant and explain how water/steam goes through energy conversion processes from the bagasse energy to the heat and electricity produced. Both the optimization model and the thermoeconomic analysis serve as valuable tools for planning in response to potential changes in bagasse and electricity market prices, as well as fluctuating product demand conditions. In the base case, combining optimization with thermo-economic analysis, the unit monetary cost of the final products has been determined: heat for refinery (8.85 R$/MWh), electricity sold (183.60 R$/MWh), internally consumed electricity (41.51 R$/MWh), and process heat (8.85 R$/MWh).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Energy, exergy and economic assessment of the introduction of VHG fermentation in conventional bioethanol production process from sugarcane

  • Palacios-Bereche, M.C.
  • Palacios-Bereche, R.
  • Gallego, A.G.
  • Rossell, C.E.V.
  • Serra, Luis M.
  • Lozano, Miguel A.
  • Ensinas, A.V.
  • Nebra, S.A.
Fermentation under Very High Gravity (VHG) conditions is an improved process that produces a wine with higher ethanol content, though requiring lower temperatures than conventional fermentation. Therefore, an auxiliary cooling system is required to maintain appropriate VHG fermentation conditions. Thus, the aim of this work is to evaluate—through energy, exergy, and economic assessments—the incorporation of the VHG fermentation process into a conventional ethanol and sugar production process. Three auxiliary cooling systems were evaluated: a) a vapour compression refrigeration system, b) an absorption refrigeration system, and c) an ejector cooling system. The VHG fermentation increases overall steam consumption by 1.7–5.3 % and reduces surplus electricity in the cogeneration system by 1.6–3.8 %. The case involving an ejector system showed the highest steam consumption and lowest surplus electricity; nevertheless, the global exergy efficiency remained around 44 % in all cases. Furthermore, VHG fermentation promotes a reduction in water consumption (−32 %) and in vinasse production (−60 %). Finally, the economic assessment showed that all auxiliary cooling systems presented economic feasibility for the assumed considerations; still, the ejector cooling system case presented the lowest capital cost (2.69 MMUSD) and the shortest payback (2.69 years).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Optimal operation and marginal costs in a complex polygeneration system including thermal energy storage and DHCN pipelines

  • De Souza, Ronelly José
  • Serra, Luis M.
  • Lozano, Miguel A.
  • Reini, Mauro
This paper proposes a thermoeconomic analysis to determine the hourly marginal costs of the optimal operation of a complex polygeneration system when the energy demand for a specific energy service increases at any time step, without modifying the operation mode of the system. The work analyses a case study which considers a mixed integer linear programming (MILP) model of an energy community (EC), comprising nine tertiary sector buildings and a central unit supplied by natural gas, solar energy, and electricity. The buildings exchange electricity through a local electric grid as well as heating and cooling through a district heating and cooling network (DHCN). The paper focuses on the marginal cost (MC) analysis of the electricity and heating demands regarding two of the EC buildings by evaluating representative time steps of a typical winter day. Additionally, a detailed analysis of the cost formation process for polygeneration heat production is conducted, clarifying the influence of thermal energy storage (TES) and DHCN on the marginal cost of heat production. The proposed marginal cost analysis reveals strategies for managing increased heat or electricity demands with minimal impact on the objective function. While the applied methodology offers robustness and transparency, it should be noted that the model under analysis does not include dynamic inefficiencies such as start-up/shut-down of technologies, and renewable variability is represented through deterministic time series. Thus, the mentioned optimal operation refers to the most cost-effective response to marginal demand changes within fixed operational modes. Obtained results indicate that optimal marginal paths have the potential to reduce operation costs by 26% compared to non-optimal ones.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Polysaccharide–protein complex-stabilized Pickering phase change material emulsions for low-temperature thermal energy storage

  • Yu, Tingting
  • Qiu, Xiaolin
  • Delgado, Mónica
  • Lázaro, Ana
  • Hu, Yang
Low-temperature phase change material emulsions (PCMEs) are excellent thermal storage media but have environmental and toxicity issues due to poorly degradable synthetic surfactants; single-component biopolymer systems lack stability, low-temperature Pickering emulsion research is scarce, protein-polysaccharide composite stabilizers in PCMEs are unreported, and Boron Nitride (BN) -biopolymer synergistic effects on supercooling remain unexplored. This study aims to develop an environmentally friendly, high-performance, low-temperature Pickering phase change material emulsion to simultaneously optimize stability, environmental compatibility, and thermal performance. This study proposes substituting traditional emulsifiers with self-assembled sodium caseinate (SC)-xanthan gum (XG) nanocomposites. Phase change emulsions were prepared by high-speed homogenization, and boron nitride was added to synergistically reduce supercooling and improve heat transfer. The SC–XG complexes adsorb at n-tetradecane/water interfaces, forming a viscoelastic interfacial network that enhances droplet stability and restricts coalescence. Thermal analysis revealed that, at 0.5% (w/v) XG, the 50 vol% n-tetradecane PCME droplets are uniform and kinetically stable, delivering a latent heat of 89.5 J g− 1. Adding only 0.75 wt% BN induces heterogeneous nucleation, cuts supercooling from 7.8 ◦C to 0.24 ◦C, and boosts thermal conductivity. This study proposes a novel protein-polysaccharide-based technical pathway for constructing green and sustainable low-temperature thermal storage materials, while also synergistically regulating the crystallization behavior and heat transfer performance of the emulsion through BN. This study provides both a theoretical foundation and a green technical solution for designing stable and efficient phase change material emulsions for thermal energy storage.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Evaluation of thermal energy storage for medium-low temperature applications: Comparison of commercial solutions with a xylitol-based prototype

  • Navarro, Miguel
  • Lázaro, Ana
  • Delgado, Mónica
In recent years, thermal energy storage (TES) has become a promising and popular technology for energy storage. Among the different technologies, this work focuses on latent heat thermal energy storage (LHTES) system, specifically it assesses the potential of xylitol as phase change material (PCM) in TES systems for low-medium temperature applications. Xylitol, a sugar alcohol with stable supercooling, has a high latent heat (240 J/g), high energy storage density (1.45 kg/l), and a melting temperature of 92 °C. However, stable supercooling and low crystallization rate limits its practical application. Therefore, a laboratory-scale prototype working in the 70-100 °C range has been proposed and experimentally characterised that uses a seeding and shearing technique to mitigate this supercooling and accelerate crystallization, thereby increasing the thermal energy discharge power. The study compares this lab-scale prototype with four leading commercial solutions in terms of both materials and systems. Moreover, the methodology developed in the framework of IEA SHC Task 58 for TES system comparison in terms of energy density and power is applied. The results show the xylitol prototype has higher normalized power values than other experimental systems analysed in the framework of IEA SHC Task 58, reaching energy densities of up to 40.8 kWh/m3 system-wise in an optimized configuration. The study concludes that stirred TES prototype with xylitol is a competitive alternative to current commercial solutions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

Sustainable Peg‐Based Shape‐Stabilized Phase Change Materials Using Raw Pine Cone as a Low‐Cost Filler and Graphite for Enhanced Thermal Conductivity

  • Akrouti, Amira
  • Trigui, Abdelwaheb
  • Delgado, Mónica
  • Navarro, Miguel
  • Lazaro, Ana
  • Hassani, Rym
This study investigates the development of a novel shape‐stabilized phase change material (ssPCM). Pinecone (PC) powder, a low‐cost and sustainable lignocellulosic support, was combined with polyethylene glycol (PEG 6000) as the phase change material (PCM). Graphite was incorporated to enhance thermal conductivity, minimize leakage, and improve shape stability. Thermophysical properties were evaluated to assess the potential of these ssPCM as thermal energy storage (TES) materials. The Fourier transform infrared spectroscopy (FTIR) was used to verify the chemical compatibility among components, and thermogravimetric analysis (TGA/DTG) to evaluate thermal stability and decomposition behavior. Brunauer–Emmett–Teller (BET) surface area, mercury intrusion porosimetry (MIP), and field emission scanning electron microscopy (FESEM) were conducted to investigate the structure of the PC support and its influence on ssPCMs. Density was measured using a thermomechanical analyzer (TMA), while thermal diffusivity was determined with a laser flash apparatus (LFA). Among the prepared composites, 80% PEG, 10% G, 10% PC showed the most promising thermal storage performance, with a latent heat of 153.7 kJ/kg by differential scanning calorimetry (DSC) and 207.3 kJ/kg by the T‐history method. Preliminary results suggest that these ssPCM offer a cost‐effective and reliable solution for TES applications, combining eco‐friendly materials with enhanced thermal, structural, and thermophysical performance.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publication Artículo científico (JournalArticle)

The Role of Thermal Energy Storage in Enhancing the Robustness of Solar-Thermal-Driven Polygeneration Systems for a Dairy Industry

  • Pina, Eduardo A.
  • Lázaro, Ana
  • Serra, Luis M.
  • Arif, M. Naveed
  • Guillén-Lambea, Silvia
  • Lozano, Miguel A.
Solar thermal-driven polygeneration (STDP) systems represent a promising approach to the production of clean and efficient energy for agri-food industries, with a wide range of temperatures for heating, cooling and power applications. This study conducted a technical, economic, and environmental assessment with particular focus on the role of three different thermal energy storage (TES) systems on the performance of STDP systems consisting of parabolic trough solar collectors, cogeneration Organic Rankine Cycle, auxiliary boiler, and mechanical chiller, to supply heating, cooling, and electricity services to a dairy industry located in Tauste, Spain. The analysis was carried out using a mixed-integer linear programming model that optimizes the selection and sizing of the equipment, as well as its operational performance over a full typical year. In order to evaluate the performance of the proposed system, 833 distinct optimisation cases were solved to study: (i) the role of TES systems located at different points (and corresponding temperature levels) within the plant layout; (ii) the interaction of the proposed system with the power grid; and (iii) sensitivity and robustness analyses based on variations in energy prices. The results showed that the proposed system achieved an annual solar fraction of 37.2%, with slightly lower costs (about 5%) and lower greenhouse gas emissions (about 37%) compared to the conventional supply system. In addition, the relative contribution of the different TES systems was determined, as well as the positive interaction with the power grid, which acted as a “virtual” energy storage system, in improving system performance.