Skip to main content

COMPRENSION DE LA INFLUENCIA DE COMBUSTIBLES NO CONVENCIONALES EN EL PROCESO DE INJECCION Y COMBUSTION TIPO DIESEL

TRA2012-36932

•
Funding agency name Ministerio de Economía y Competitividad
Funding agency acronym MINECO
Program Programa Nacional de Proyectos de Investigación Fundamental
Subprogram Subprograma de Proyectos de Investigación Fundamental no Orientada
Call Proyectos I+D
Call year 2012
State Plan 2008-2011 Plan Nacional de Investigación Científica, Desarrollo e Innovación Tecnológica
Management unit Secretaría de Estado de Investigación, Desarrollo e Innovación
Beneficiary centre UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 27
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Probabilistic solution of the homogeneous Riccati differential equation: A case-study by using linearization and transformation techniques

  • M.-C. Casabán|||0000-0002-5708-5709
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Navarro-Quiles, A.
[EN] This paper deals with the determination of the first probability density function of the solution stochastic process to the homogeneous Riccati differential equation taking advantage of both linearization and Random Variable Transformation techniques. The study is split in all possible casuistries regarding the deterministic/random character of the involved input parameters. An illustrative example is provided for each one of the considered cases., This work has been partially supported by the Ministerio de Economia y Competitividad grants MTM2013-41765-P and TRA2012-36932.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental characterization of diesel ignition and lift-off length using a single-hole ECN injector

  • Benajes, Jesús|||0000-0002-1653-9188
  • Payri, Raul|||0000-0001-7428-5510
  • Marti-Aldaravi, Pedro|||0000-0003-4650-4004
  • Bardi, Michele
In this work, lift-off length and ignition delay have been measured via chemiluminescence techniques in a wide range of conditions for a single-hole injector from the Engine Combustion Network (ECN) dataset and using a single component fuel (n-dodecane). In addition, Schlieren technique was used to characterize the ignition event using a new developed post-processing methodology capable of characterizing the "disappearance" phenomenon linked to the start of cool flames. Experiments have been carried out in a novel constant-pressure flow facility able of reproducing engine-like thermodynamic conditions. Results show that oxygen concentration seems to have a negligible impact on the start of cool flames. Empirical correlations have been obtained for the three measured parameters and they manifest similar trends of other previously published correlations for lift-off length and second stage ignition. These correlations also underline that the effect of oxygen concentration and ambient density is caught differently by chemiluminescence and Schlieren techniques, even though the absolute value of the measurements remains close. (C) 2013 Elsevier Ltd. All rights reserved., This work was sponsored by "Ministerio de Economia y Competitividad" of the Spanish Government in the frame of the Project "Comprension de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo diesel", Reference TRA2012-36932. Additionally, the Ph.D student Michele Bardi was financed by a grant from "Conselleria de educacio, cultura y esport" of the "Generalitat Valenciana" with Reference GRISOLIA/2010/010. This support is gratefully acknowledged by the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Velocity field analysis of the high density, high pressure diesel spray

  • Payri, Raul|||0000-0001-7428-5510
  • Viera-Sotillo, Juan Pablo
  • Wang, Huan
  • Malbec, Louis-Marie
In this study, particle image velocimetry (PIV) measurements have been performed extensively on a non-reactive dense diesel spray injected from a single orifice injector, under various injection pressure and steady ambient conditions, in a constant flow chamber. Details of PIV setup for diesel spray measurement without additional seeding are explained first. The measured velocity profiles are compared to those obtained from other similar measurements performed in a different institution, as well as those obtained from a 1D spray model simulation, presenting in both cases a good level of agreement. In addition, the velocity fields under various injection pressures and ambient densities show the dominant effects of these parameters on the behavior of diesel spray. The self-similarity of the transverse cut profiles of axial velocity is evaluated, showing that the measurements are in agreement with the hypothesis of self-similar velocity profiles. Finally, the effect of injection pressure and ambient density on the velocity fluctuations is presented and analyzed as well. While the experimental results presented here could help to understand the complex diesel fuel-air mixing process during injection, they also provide additional spray velocity data for future computational model validation, following the main idea of the Engine Combustion Network., This work was sponsored by "Ministerio de Economia y Competitividad" of the Spanish Government in the frame of the Project "Comprension de la influencia de combustibles no convencionales en el proceso de injeccion y combustion tipo diesel", Reference TRA2012-36932. Additionally, the optical equipment used for the project was purchased with funding from Ministerio de Economia y Competitividad FEDER-ICTS-2012-06.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Probabilistic Analysis to Quantify the Effect of March 11, 2004, Attacks in Madrid on the March 14 Elections in Spain: A Dynamic Modelling Approach

  • Cortés, J.-C.|||0000-0002-6528-2155
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Sánchez, Francisco
  • Santonja Gómez, Francisco José
[EN] The bomb attacks in Madrid three days before the general elections of March 14, 2004, and their possible influence on the victory of PSOE (Spanish Workers Socialist Party), defeating PP (Popular Party), have been a matter of study from several points of view (i.e., sociological, political, or statistical). In this paper, we present a dynamic model based on a system of differential equations such that it, using data from Spanish CIS (National Center of Sociological Research), describes the evolution of voting intention of the Spanish people over time. Using this model, we conclude that the probability is very low that the PSOE would have won had the attack not happened.Moreover, after the attack, the PSOE increased an average of 5.6% in voting onMarch 14 and an average of 11.2% of the Spanish people changed their vote betweenMarch 11 andMarch 14.These figures are in accordance with other studies., This work has been partially supported by the Ministerio de Econom´ıa y Competitividad Grants MTM2013-41765-P and TRA2012-36932.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Comparison of microsac and VCO diesel injector nozzles in terms of internal nozzle flow characteristics

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Jaramillo Císcar, David
  • Martínez López, Jorge
A computational study focused on the inner nozzle flow and cavitation phenomena has been reported in this paper in order to investigate the two most common types of diesel injector nozzles at the present: microsac and valve covered orifice (VCO). The geometrical differences among both types of nozzles are mainly located at the needle seat, upstream of the discharge orifices. In the case of microsac nozzles there is a small volume upstream of the discharge orifices which is not present in VCO nozzles. Due to these geometrical differences among both type of nozzles, differences in the inner flow and the cavitation development have been found and analysed in this research. For the study, two cylindrical nozzles with six orifices and the same outlet diameter have been experimentally characterized in terms of mass flow rate. These measurements have been used to validate the CFD results obtained with the code OpenFOAM used for the analysis of the internal nozzle flow. For the simulations, two meshes that reproduce the microsac and VCO nozzles seat geometry while keeping the same geometry at the orifices have been built. The simulations have been carried out with a code previously validated and able to simulate cavitation phenomena using a homogeneous equilibrium model (HEM) and with RANS approach for the turbulence modelling (RNG k-epsilon). For the computational study, three injection pressures and different geometries simulating different needle lifts have been used. The comparison among nozzles has been made in terms of mass flow, momentum flux and effective velocity and in terms of other non-dimensional parameters which are useful for describing the inner nozzle flow: discharge coefficient (C-d), area coefficient (C-alpha) and velocity coefficient (C-v). The analysis performed by studying and comparing the particularities of the flow in each nozzle has been useful in order to explain the experimental differences found in terms of mass flow rate and critical cavitation conditions. One of the main conclusions of this study is the higher influence of the needle on the mass flow, momentum and injection velocity results for the VCO nozzle as compared to the microsac one. Hence, whereas in the first one these variables scale with the needle lift value, in the second one there is an intermediate needle lift from which they stop being influenced by the presence of the needle. Furthermore, the study has also revealed important differences in the proneness to produce cavitation and its morphology. For the VCO nozzle, cavitation phenomenon occurs only in the upper part of the orifice inlet. However, for the microsac nozzle cavitation appears both at the upper and the lower part of the nozzle orifice entrance., This work was partly sponsored by "Ministerio de Economia y Competitividad" in the frame of the project "Comprension de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo diesel", Reference TRA2012-36932. This support is gratefully acknowledged by the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental and numerical study of lift-off length and ignition delay of a two-component diesel surrogate

  • Payri, Raul|||0000-0001-7428-5510
  • Viera Sotillo, Juan Pablo
  • Pei, Yuanjiang
  • Som, Sibendu
Understanding and controlling mixing and combustion processes is fundamental for the ever more demanding pollutant regulations and fuel consumption standards of direct injection diesel engines. The fundamentals of these processes have been long studied from both experimental and numerical perspectives. As numerical models become more advanced, the need for adequate experimental data increases. Hence, experimental methodologies and scientific databases need to be enhanced with more quantitative, accurate, consistent, and reliable information in order to evaluate the models in a robust fashion. The present study seeks to enhance the current state-of-the-art by further evaluating the combustion performance of a two-component diesel surrogate for multi-dimensional compression ignition engine simulations, composed of n-dodecane and m-xylene. This surrogate is expected to better represent diesel fuel combustion than the standard Engine Combustion Network (ECN) fuel (n-dodecane), since it contains an alkyl-benzene which represents an important chemical class present in diesel fuels. Experiments and numerical simulations have been performed on lift-off length and ignition delay in a wide range of conditions for a single-hole injector from ECN. The experiments were carried out in a constant-pressure flow facility able of reproducing engine-like thermodynamic conditions. The experiments focused in characterizing the ignition delay through the Schlieren technique, and the lift-off length through OH* chemiluminescence visualization, at ECN suggested test conditions. On the other hand, computational fluid dynamics (CFD) simulations were performed using a multi-flamelet representative interactive flamelet (mRIF) model by taking consideration of turbulence-chemistry-interaction (TCI) with a beta-function on the form of scalar probability density functions (PDFs). This model is evaluated extensively over a wider range of parametric variations in this study. Encouraging results were obtained compared to the experiments with regards to the predictions of ignition delay and lift-off length at different ambient temperatures, ambient densities and fuel-injection pressures. Under predictions were found at less reactive conditions, which leave room for improvement in the future. (C) 2014 Elsevier Ltd. All rights reserved., The research was funded by DOE's Office of Vehicle Technologies, Office of Energy Efficiency and Renewable Energy under Contract No. DE-AC02-06CH11357. The authors wish to thank Gurpreet Singh and Leo Breton, program managers at DOE, for his support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental Characterization of the Thermodynamic Properties of Diesel Fuels Over a Wide Range of Pressures and Temperatures

  • Desantes J.M.|||0000-0002-4124-9393
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Jaramillo-Císcar, David
The influence of pressure and temperature on some of the important thermodynamic properties of diesel fuels has been assessed for a set of fuels. The study focuses on the experimental determination of the speed of sound, density and compressibility (via the bulk modulus) of these fuels by means of a method that is thoroughly described in this paper. The setup makes use of a common-rail injection system in order to transmit a pressure wave through a high-pressure line and measure the time it takes for the wave to travel a given distance. Measurements have been performed in a wide range of pressures (from atmospheric pressure up to 200 MPa) and temperatures (from 303 to 353 K), in order to generate a fuel properties database for modelers on the field of injection systems for diesel engines to incorporate to their simulations., This work was partly sponsored by "Ministerio de Economia y Competitividad" (Spanish Ministry of Economy) in the frame of the project "Comprension de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo diesel", reference TRA2012-36932. The equipment used in this work has
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Measurements of droplet size in shear-driven atomization using ultra-small angle x-ray scattering

  • Kastengren, Alan
  • Ilavsky, J.
  • Viera-Sotillo, Juan Pablo
  • Duke, Daniel J.
  • Swantek, A.
  • Tilocco, F. Zak
  • Sovis, N.
  • Powell, Christopher F.
  • Payri, Raul|||0000-0001-7428-5510
[EN] Measurements of droplet size in optically-thick, non-evaporating, shear-driven sprays have been made using ultra-small angle x-ray scattering (USAXS). The sprays are produced by orifice-type nozzles coupled to diesel injectors, with measurements conducted from 1 - 24 mm from the orifice, spanning from the optically-dense near-nozzle region to more dilute regions where optical diagnostics are feasible. The influence of nozzle diameter, liquid injection pressure, and ambient density were examined. The USAXS measurements reveal few if any nanoscale droplets, in conflict with a popular computational model of diesel spray breakup. The average droplet diameter rapidly decreases with downstream distance from the nozzle until a plateau value is reached, after which only small changes are seen in droplet diameter. This plateau droplet size is consistent with the droplets being small enough to be stable with respect to further breakup. Liquid injection pressure and nozzle diameter have the biggest impact on droplet size, while ambient density has a smaller effect. (C) 2017 Published by Elsevier Ltd., X-ray spray research at Argonne is supported by the DOE Advanced Combustion Program. We acknowledge team leaders Gurpreet Singh and Leo Breton for their support. These experiments were performed at the 7-BM, 9-ID, and 15-ID beamlines of the Advanced Photon Source, Argonne National Laboratory. ChemMatCARS Sector 15 is principally supported by the Divisions of Chemistry (CHE) and Materials Research (DMR), National Science Foundation, under grant number NSF/CHE-1346572. Use of the Advanced Photon Source, an Office of Science User Facility operated for the U.S. Department of Energy (DOE) Office of Science by Argonne National Laboratory, was supported by the U.S. DOE under Contract No. DE-ACO2-06CH11357. R. Payri was funded by a Fulbright visiting scholar grant in collaboration with the Ministry of Education, Culture and Sports of Spain (reference PRX14/00331) while performing this work. J.P. Viera was funded by the Spanish MINECO grant EEBB-I-15-0976 under project TRA2012-36932.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Probabilistic solution of random SI-type epidemiological models using the Random Variable Transformation technique

  • M.-C. Casabán|||0000-0002-5708-5709
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
[EN] This paper presents a full probabilistic description of the solution of random SI-type epidemiological models which are based on nonlinear differential equations. This description consists of determining: the first probability density function of the solution in terms of the density functions of the diffusion coefficient and the initial condition, which are assumed to be independent random variables; the expectation and variance functions of the solution as well as confidence intervals and, finally, the distribution of time until a given proportion of susceptibles remains in the population. The obtained formulas are general since they are valid regardless the probability distributions assigned to the random inputs. We also present a pair of illustrative examples including in one of them the application of the theoretical results to model the diffusion of a technology using real data., This work has been partially supported by the Ministerio de Economia y Competitividad Grants MTM2013-41765-P and TRA2012-36932.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Diesel ignition delay and lift-off length through different methodologies using a multi-hole injector

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Viera Sotillo, Alberto Antonio
  • Manin, Julien
In this paper, lift-off length has been measured via both broadband luminosity and OH chemiluminescence. In addition, ignition delay has also been measured via broadband chemiluminescence and Schlieren imaging. A 3 orifice injector from the Engine Combustion Network (ECN) set, referred to as Spray B, and a single component fuel (n-dodecane) was used. Experiments were carried out in a constant flow and pressure facility, that allowed to reproduce engine-like thermodynamic conditions, and enabled the study to be performed over a wide range of test conditions with a very high repetition rate. Data obtained was also compared with results from a single orifice injector also from the Engine Combustion Network, with analog orifice characteristics (90 lm outlet diameter and convergent shape) and technology as the injector used. Results showed that there is good correlation between the ignition delay measured through both methodologies, that oxygen concentration and injection pressure plays a minor role in the ignition delay, being ambient temperature and density the parameters with the highest influence. Lift-off length measurements showed significant differences between methodologies. Minor deviation was observed between injectors with different nozzle geometry (seat inclination angle), due to temperature variations along the chamber, highlighting the importance of temperature distribution along combustion vessels. Empirical correlations for lift-off and ignition delay were calculated, underlining the effect of the conditions on the parameters studied. Coefficients of the correlations were compared with results for the single orifice injector, this showed that variations of test conditions have the same impact on ignition delay and lift-off length regardless the nozzle orifice configuration., This work was sponsored by "Ministerio de Economia y Competitividad" of the Spanish Government in the frame of the Project "Comprension de la influencia de combustibles no convencionales en el proceso de injeccion y combustion tipo Diesel", Reference TRA2012-36932. Additionally, the optical equipment used for the project was purchased with funding from Ministerio de Economia y Competitividad FEDER-ICTS-2012-06.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Characterization and prediction of the discharge coefficient of non-cavitating diesel injection nozzles

  • Desantes J.M.|||0000-0002-4124-9393
  • López, J. Javier|||0000-0002-9486-2511
  • Carreres, Marcos|||0000-0001-6430-6613
  • López-Pintor, Darío
An experimental and theoretical study about the characterization of the discharge coefficient of diesel injection nozzles under non-cavitating conditions is presented in this paper. A theoretical development based on the boundary layer equations has been performed to define the discharge coefficient of a convergent nozzle. The discharge coefficient has been experimentally obtained for a standard diesel fuel under a wide range of Reynolds numbers by two different techniques: mass flow rate measurements and permeability measurements. Five different nozzles have been used: two multi-hole nozzles that have been tested in the frame of this work, and three other single-hole nozzles, the data of which have been taken from previous studies. The experimental results show good agreement with the theoretical expressions, proving that it is possible to predict the discharge coefficient of a non-cavitating nozzle with the equations shown in this paper., The authors would like to thank different members of the CMT-Motores Termicos team of the Universitat Politecnica de Valencia for their contribution to this work, specially to R. Payri, F.J. Salvador, J. Gimeno and G. Bracho. This work was partly sponsored by "Ministerio de Economia y Competitividad" in the frame of the project "Comprension de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo diesel", reference TRA2012-36932. The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)", in the frame of the operation program of unique scientific and technical infrastructure of the Ministry of Science and Innovation of Spain. This support is gratefully acknowledged by the authors. Finally, the authors would like to thank the Spanish Ministry of Education for financing the PhD. studies of Dario Lopez-Pintor (grant FPU13/02329).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Linking instantaneous rate of injection to X-ray needle lift measurements for a direct-acting piezoelectric injector

  • Viera-Sotillo, Juan Pablo
  • Swantek, Andrew B.
  • Duke, Daniel J.
  • Sovis, Nicolas
  • Kastengren, Alan L.
  • Powell, Christopher F.
  • Payri, Raul|||0000-0001-7428-5510
Internal combustion engines have been and still are key players in today's world. Ever increasing fuel consumption standards and the ongoing concerns about exhaust emissions have pushed the industry to research new concepts and develop new technologies that address these challenges. To this end, the diesel direct injection system has recently seen the introduction of direct-acting piezoelectric injectors, which provide engineers with direct control over the needle lift, and thus instantaneous rate of injection (ROI). Even though this type of injector has been studied previously, no direct link between the instantaneous needle lift and the resulting rate of injection has been quantified. This study presents an experimental analysis of the relationship between instantaneous partial needle lifts and the corresponding ROI. A prototype direct-acting injector was utilized to produce steady injections of different magnitude by partially lifting the needle. The ROI measurements were carried out at CMT-Motores Termicos utilizing a standard injection rate discharge curve indicator based on the Bosch method (anechoic tube). The needle lift measurements were performed at the Advanced Photon Source at Argonne National Laboratory. The analysis seeks both to contribute to the current understanding of the influence that partial needle lifts have over the instantaneous ROI and to provide experimental data with parametric variations useful for numerical model validations. Results show a strong relationship between the steady partial needle lift and the ROI. The effect is non-linear, and also strongly dependent on the injection pressure. The steady lift value at which the needle ceases to influence the ROI increases with the injection pressure. Finally, a transient analysis is presented, showing that the needle velocity may considerably affect the instantaneous ROI, because of the volume displaced inside the nozzle. Results presented in this study show that at constant injection pressure and energizing time, this injector has the potential to control many aspects of the ROI and thus, the heat release rate. Also, data presented are useful for numerical model validations, which would provide detailed insight into the physical processes that drive these observations, and potentially, to the effects of these features on combustion performance., The submitted manuscript has been created by UChicago Argonne, LLC, Operator of Argonne National Laboratory (Argonne). Argonne, a U.S. Department of Energy Office of Science laboratory, is operated under Contract No. DE-AC02-06CH11357. The U.S. Government retains for itself, and others acting on its behalf, a paid-up nonexclusive, irrevocable worldwide license in said article to reproduce, prepare derivative works, distribute copies to the public, and perform publicly and display publicly, by or on behalf of the Government.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Numerical simulation of primary atomization in diesel spray at low injection pressure

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Jaramillo-Císcar, David
[EN] Atomization involves complex physical processes and gas liquid interaction. Primary atomization on diesel spray is not well understood due to the difficulties to perform experimental measurements in the near nozzle field. Hence computational fluid dynamics (CFD) has been used as a key element to understand and improve diesel spray. A recent new code for incompressible multiphase flow with adaptive octree mesh refinement has been used to perform simulations of atomization at low injection pressure conditions. The multiphase flow strategy to manage different flows is the volume of fluid (VOF) method. The adaptive mesh allows to locally refine the mesh at each time step where a better resolution is needed to capture important gradients instead of using a static mesh with a fixed and high number of cells which, in turn, would lead to an unaffordable computational cost. Even with this approach, the cell number is very high to achieve a Direct Numerical Simulation (DNS) at reasonable computational cost. To reduce the computational cost, an idea has been explored, the possibility of setting a maximum number of cells of the domain. Following this idea, the code has been tested with different configurations to understand their effects on numerical stability, the change in different spray parameters and the benefits achieved in terms of execution time. The outcomes have been validated against a theoretical model., This work was sponsored by "Ministerio de Economa y Competitividad" of the Spanish Government in the frame of the Project "Comprensin de la influencia de combustibles no convencionales en el proceso de injeccin y combustin tipo diesel", Reference TRA2012-36932 and MTM2013-41765-P. Additionally, the hardware used for the project was purchased with funding from Ministerio de economia y competitividad FEDER-ICTS-2012-06. The authors would also like to thank the computer resources, technical expertise and assistance provided by the Universitat de Valencia in the use of the supercomputer "Tirant".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Constructing adaptive generalized polynomial chaos method to measure the uncertainty in continuous models: A computational approach

  • Chen Charpentier, Benito Miguel
  • Licea Salazar, Juan Antonio
  • Santonja, F.
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
Due to errors in measurements and inherent variability in the quantities of interest, models based on random differential equations give more realistic results than their deterministic counterpart. The generalized polynomial chaos (gPC) is a powerful technique used to approximate the solution of these equations when the random inputs follow standard probability distributions. But in many cases these random inputs do not have a standard probability distribution. In this paper, we present a step-by-step constructive methodology to implement directly a useful version of adaptive gPC for arbitrary distributions, extending the applicability of the gPC. The paper mainly focuses on the computational aspects, on the implementation of the method and on the creation of a useful software tool. This tool allows the user to easily change the types of distributions and the order of the expansions, and to study their effects on the convergence and on the results. Several examples illustrating the usefulness of the method are included., This work has been partially supported by the Spanish M.C.Y.T. grants: MTM2013-41765-P and TRA2012-36932; FIS PI10/01433; Universitat Politecnica de Valencia grants: PAID06-11-2070 and PAID-00-11-2753, and Universitat de Valencia grant: UV-INV-PRECOMP12-80708.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

On the relation between the external structure and the internal characteristics in the near-nozzle field of diesel sprays

  • Benajes, Jesús|||0000-0002-1653-9188
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Jaramillo-Císcar, David
[EN] In this paper, a high-resolution visualization technique has been used in combination with an extensively validated 0D model in order to relate the external structure of a diesel spray to the internal properties in the vicinity of the nozzle. For this purpose, three single-hole convergent nozzles with different diameters have been tested for several pressure conditions. The analysis of the obtained images shows that the spray width significantly changes along the very first millimeters of the spray. From the high resolution images captured, two parameters have been evaluated. The first one is the external non-perturbed length, where droplet detachment has not been observed. The second one is a transitional length, defined as the axial position where the spray width increases linearly after a transient behavior, making it possible to establish a spray cone angle definition. Furthermore, the internal liquid core length has been estimated for these nozzles using an extensively validated zero-dimensional model. The intact liquid core length has proved to be correlated with both the transitional length and the non-perturbed length with a very high degree of reliability. In the case of the transitional length, a quadratic correlation has been observed, whereas a linear relationship has been confirmed between the intact core length and the non-perturbed length. The results presented here may help to shed light on better understanding of such a complex process as atomization., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the Ministerio de Economia y Competitividad, Spanish Government, under the project 'Comprension de la influencia de combustibles no convencionales en el proceso de injeccion y combustion tipo diesel' (project number TRA2012-36932) The PhD studies of D. Jaramillo have been funded by "Conselleria d'Educacio'Cultura i Esports'' of "Generalitat Valenciana'', Spain, by means of ''Programa Vali+ d per a personal investigador en formacio''. Reference ACIF/2015/040.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Engine combustion network: Influence of the gas properties on the spray penetration and spreading angle

  • Payri, F.|||0000-0002-3314-4911
  • Payri, Raul|||0000-0001-7428-5510
  • Carreres, Marcos|||0000-0001-6430-6613
  • Bardi, Michele
In this work, three Engine Combustion Network (ECN) single-hole nozzles with the same nominal characteristics have been tested under a wide range of conditions measuring spray penetration and spreading angle. n-Dodecane has been injected in non-evaporative conditions at different injection pressures ranging from 50 to 150 MPa and several levels of ambient densities from 7.6 to 22.8 kg/m(3). Nitrogen and Sulphur Hexafluoride (SF6) atmospheres have been explored and, in the first case, a temperature sweep from 300 to 550 K at constant gas density has been executed. Mie scattering has been used as the optical technique by employing a fast camera, whereas image processing has been performed through a home-built Mat lab code. Differences in spray penetration related to spray orifice diameter, spreading angle and start of injection transient have been found for the three injectors. Significant differences have been obtained when changing the ambient gas, whereas ambient temperature hardly affects the spray characteristics up to 400 K. However, a reduction in penetration has been observed beyond this point, mainly due to the sensitivity limitation of the technique as fuel evaporation becomes important. The different behavior observed when injecting in different gases could be explained due to the incomplete momentum transfer between spray droplets and entrained gas, together with the fact that there is an important change in speed of sound for the different gases, which affects the initial stage of the injection. (C) 2014 Elsevier Inc. All rights reserved., This work was sponsored by "Ministerio de Economia y Competitividad" of the Spanish Government in the frame of the Project "Comprension de la influencia de combustibles no convencionales en el proceso de injeccion y combustion tipo diesel", Reference TRA2012-36932.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Probabilistic solution of random homogeneous linear second-order difference equations

  • M.-C. Casabán|||0000-0002-5708-5709
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
This paper deals with the computation of the first probability density function of the solution of random homogeneous linear second-order difference equations by the Random Variable Transformation method. This approach allows us to generalize the classical solution obtained in the deterministic scenario. Several illustrative examples are provided., This work was sponsored by "Ministerio de Economa y Competitividad" of the Spanish Government in the frame of the Project with Reference TRA2012-36932.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Analysis of the combined effect of hydrogrinding process and inclination angle on hydraulic performance of diesel injection nozzles

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Jaramillo Císcar, David
  • Martínez López, Jorge
A computational study to investigate the influence of the orifices inclination and the rounding radius at the orifice inlet (consequence of the hydro-erosive grinding process applied after the orifices machining) over the internal nozzle flow is performed in this paper. The study starts with the analysis of experimental results where the mass flow and momentum flux of two nozzles with very different values of these two variables are compared. This analysis shows relatively small differences in terms of mass flow and momentum flux, since the higher losses associated to the higher deflection of the streamlines with a higher inclination of the orifices are counteracted by the higher rounding radius, which favors the flow entrance to the orifice. To explain this experimental outcome, an extensive computational study involving nine geometries that combine different inclination angles and rounding radius is conducted, in order to quantify the influence of both parameters on the flow separately, as well as to assess the potential of their combination. These geometries are compared in terms of discharge coefficient, critical cavitation conditions and effective injection velocity, among others. Results show differences up to 15% in terms of mass flow rate and 8% for the effective injection velocity among the two extreme cases (lowest inclination and highest hydro-erosion level versus the nozzle with the highest inclination and lowest hydro-erosion level). Given the importance of these phenomena on the subsequent mixing and combustion processes, the results hereby presented are of interest for Diesel engines injectors and combustion chambers designers., This work was partly sponsored by "Ministerio de Economia y Competitividad" in the frame of the project "Comprension de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo diesel", Reference TRA2012-36932. The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)", in the frame of the operation program of unique scientific and technical infrastructure of the Ministry of Science and Innovation of Spain. This support is gratefully acknowledged by the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Experimental analysis on the influence of nozzle geometry over the dispersion of liquid n-dodecane sprays

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Viera-Sotillo, Juan Pablo
[EN] Understanding and controlling mixing and combustion processes is fundamental in order to face the challenges set by the ever more demanding pollutant regulations and fuel consumption standards of direct injection diesel engines. The fundamentals of these processes haven been long studied by the diesel spray community from both experimental and numerical perspectives. However, certain topics, such as the influence of nozzle geometry over the spray atomization, mixing, and combustion process, are still not completely well understood and predicted by numerical models. The present study seeks to contribute to the current understanding of this subject, by performing state of the art optical diagnostics to liquid sprays injected through two singe-hole nozzles of different conicity. The experiments were carried out in a nitrogen-filled constantpressure-flow facility. Back pressures were set to produce the desired engine-like density conditions in the chamber, at room temperature. The experimental setup consists in a diffused back-illumination setup with a fast pulsed LED light source and a high-speed camera. The diagnostics focused on detecting the liquid spray contour and evaluating the influence of nozzle geometry over the time-resolved and quasi-steady response of the spray dispersion, at similar injection conditions. Results show a clear influence of nozzle geometry on spray contour fluctuations, where the cylindrical nozzle seems to produce larger dispersion in both time-resolved fluctuations and quasi-steady values, when compared to the conical nozzle. This evidences that the turbulence and radial velocity profiles originated at the cylindrical nozzle geometry are able to affect not only the microscopic scales inside the nozzle, but also macroscopic scales, such as the steady spray. Observations from this study indicate that the effects of the flow characteristics within the nozzle are carried on to the first millimeters of the spray, in which the rest of the spray formation downstream is pre-defined., This work was sponsored by Ministerio de Economía y Competitividad of the Spanish Government in the frame of the Project “Comprensión de la influencia de combustibles no convencionales en el proceso de inyección y combustión tipo diesel,” Reference TRA2012-36932. Additionally, the optical equipment used for the project was purchased with funding from Ministerio de Economía y Competitividad FEDER-ICTS-2012-06. The authors would finally like to thank José Enrique Del Rey and María del Carmen Tomás for their collaboration in the setup of the experiments and laboratory work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Effect of turbulence model and inlet boundary condition on the Diesel spray behavior simulated by an Eulerian Spray Atomization (ESA) model

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Pastor Enguídanos, José Manuel
  • Martí Aldaraví, Pedro
Simulating liquid spray first and second atomization is not an easy task. Many models have been developed over the past years, but Eulerian ones have proved their better performance for the dense zone of the spray. In this work a new compressible Eulerian model is used to compute the internal flow together with the spray. Up to five two-equation turbulence models have been tested and its influence is remark- able in terms of spray behavior, but also greatly affects the mass flow rate and the momentum flux. At the end, SST k x model proves to be best than the others. Additionally, different types of inlet boundary con- ditions have been also tested and analyzed. Results when compared with previously obtained experimental data show that the commonly used for external flow time-varying velocity boundary condition gives also good performance for the internal flow., This research was funded in the frame of Project "Compresion de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo Diesel" reference TRA2012-36932 from Ministerio de Economia y Competitividad (Spanish Ministry of Economy).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A computational investigation on the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development in diesel injector nozzles

  • Molina, Santiago|||0000-0001-7879-2421
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Jaramillo, D.
In this paper a computational study was carried out in order to investigate the influence of the use of elliptical orifices on the inner nozzle flow and cavitation development. With this aim, a large number of injection conditions have been simulated and analysed for 5 different nozzles: four nozzles with different elliptical orifices and one standard nozzle with circular orifices. The four elliptical nozzles differ from each other in the orientation of the major axis (vertical or horizontal) and in the eccentricity value, but keeping the same outlet section in all cases. The comparison has been made in terms of mass flow, momentum flux and other important non-dimensional parameters which help to describe the behaviour of the inner nozzle flow: discharge coefficient (C-d), area coefficient (C-a) and velocity coefficient (C-v). The simulations have been done with a code able to simulate the flow under either cavitating or non-cavitating conditions. This code has been previously validated using experimental measurements over the standard nozzle with circular orifices. The main results of the investigation have shown how the different geometries modify the critical cavitation conditions as well as the discharge coefficient and the effective velocity. In particular, elliptical geometries with vertically oriented major axis are less prone to cavitate and have a lower discharge coefficient, whereas elliptical geometries with horizontally oriented major axis are more prone to cavitate and show a higher discharge coefficient. (C) 2013 Elsevier Ltd. All rights reserved., This work was partly sponsored by "Vicerrectorado de Investigacion, Desarrollo e Innovacion" of the "Universitat Politecnica de Valencia" in the frame of the project "Estudio de la influencia del uso de combustibles alternativos sobre el proceso de inyeccion mediante GRID computing (FUELGRID)", Reference SP20120396 and by "Ministerio de Economia y Competitividad" in the frame of the project "Comprension de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo diesel", reference TRA2012-36932. This support is gratefully acknowledged by the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part I: Experimental mass flow rate measurements and discussion

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Carreres, Marcos|||0000-0001-6430-6613
  • Crialesi Esposito, Marco
An experimental study is conducted in this paper in order to assess the influence of the fuel temperature on the performance of a last generation common-rail ballistic solenoid injector. Mass flow rate measurements are performed for a wide range of temperatures, extending from 253 to 373 K, representative of all the possible operating conditions of the injector in a real diesel engine, including cold start. The high pressure line and the injector holder were refrigerated, making it possible to carefully control the fuel temperature, whereas measurements at cold conditions were carried out with the help of a climatic chamber. Relevant features such as stationary mass flow, injection delay or the behaviour at the opening and closing stages are analysed together with parameters governing the flow, such as the injector discharge coefficient. Results show an important influence of the fuel temperature, especially at low injection pressure. A low injection temperature results in a lower stationary mass flow rate, whereas injection duration is also reduced. These results will be explained mainly through the fuel properties variation induced by temperature, together with the ballistic nature of the injector used for the study. A second part of the paper introduces a one-dimensional model that makes it possible to reproduce these results and further explain them through the analysis of other relevant variables, such as the needle lift., This work was partly sponsored by "Ministerio de Economia y Competitividad" (Spain) in the frame of the project "Comprension de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo diesel", reference TRA2012-36932. The equipment used in this work has been partially supported by FEDER project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)", in the frame of the operation program of unique scientific and technical infrastructure of the Ministry of Science and Innovation of Spain. This support is gratefully acknowledged by the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

X-ray radiography of cavitation in a beryllium alloy nozzle

  • Duke, Daniel J.
  • Matusik, Katarzyna E.
  • Kastengren, Alan L.
  • Swantek, Andrew B.
  • Sovis, Nicholas
  • Viera-Sotillo, Juan Pablo
  • Powell, Christopher F.
  • Payri, Raul|||0000-0001-7428-5510
[EN] Making quantitative measurements of the vapor distribution in a cavitating nozzle is difficult, owing to the strong scattering of visible light at gas-liquid boundaries and wall boundaries, and the small lengths and time scales involved. The transparent models required for optical experiments are also limited in terms of maximum pressure and operating life. Over the past few years, x-ray radiography experiments at Argonne's Advanced Photon Source have demonstrated the ability to perform quantitative measurements of the line of sight projected vapor fraction in submerged, cavitating plastic nozzles. In this paper, we present the results of new radiography experiments performed on a submerged beryllium nozzle which is 520m in diameter, with a length/diameter ratio of 6. Beryllium is a light, hard metal that is very transparent to x-rays due to its low atomic number. We present quantitative measurements of cavitation vapor distribution conducted over a range of non-dimensional cavitation and Reynolds numbers, up to values typical of gasoline and diesel fuel injectors. A novel aspect of this work is the ability to quantitatively measure the area contraction along the nozzle with high spatial resolution. Analysis of the vapor distribution, area contraction and discharge coefficients are made between the beryllium nozzle and plastic nozzles of the same nominal geometry. When gas is dissolved in the fuel, the vapor distribution can be quite different from that found in plastic nozzles of the same dimensions, although the discharge coefficients are unaffected. In the beryllium nozzle, there were substantially fewer machining defects to act as nucleation sites for the precipitation of bubbles from dissolved gases in the fuel, and as such the effect on the vapor distribution was greatly reduced., Raul Payri was funded by a Fulbright visiting scholar grant in collaboration with the Ministry of Education, Culture and Sports of Spain (reference PRX14/00331) while performing this work. Juan P Viera was funded by the Spanish MINECO (grant EEBB-I-15-0976 under project TRA2012-36932).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A Technique to Match the Refractive Index of Different Diesel Fuels with the Refractive Index of Transparent Materials to Improve the Experimental Visualization

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Gimeno, Jaime|||0000-0003-3317-9994
  • Venegas Pereira, Óscar Hernando
In this article a technique to match the refractive index (n) of different diesel fuels with the refractive index of transparent materials is presented with the aim to improve the flow visualization inside transparent nozzles. For this purpose, a technique based on the variation of the angle of a laser beam passing through the tested fluid and the transparent material was used. The validation of this technique was performed by measuring the refractive index of known fluids (n-decane and n-hexadecane) and comparing them with literature ones. After this, the refractive index was determined for three different diesel fuels: commercial diesel, a rapeseed methyl ester biodiesel (RME) and cold start diesel. The uncertainty of the measurements represents a relative error respect to the mean of only 0.1%. Next, to equal the refractive index of each fuel with the refractive index of the transparent material (fused silica nozzle), a doping process was performed with 1-methylnaphthalene and n-hexadecane at different concentrations. The main advantage of applying this technique in visualization measurements is to obtain additionally the fuel refractive index and match this with the transparent nozzle under real conditions without requiring additional equipment such as refractometers., The authors would like to thank Jose Enrique del Rey* for his collaboration in the experimental measurements. This work was carried in the frame of the project "Comprension de la influencia de combustibles no convencionales en el proceso de injeccion y combustion tipo Diesel"; reference TRA2012-36932 with the support of the Ministerio de Economia y Competitividad of the Government of Spain. (*) From CMT-Motores Termicos. Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Fuel temperature influence on the performance of a last generation common-rail diesel ballistic injector. Part II: 1D model development, validation and analysis

  • Payri, Raul|||0000-0001-7428-5510
  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • De La Morena, Joaquín|||0000-0003-0208-508X
A one-dimensional model of a solenoid-driven common-rail diesel injector has been developed in order to study the influence of fuel temperature on the injection process. The model has been implemented after a thorough characterization of the injector, both from the dimensional and the hydraulic point of view. In this sense, experimental tools for the determination of the geometry of the injector lines and orifices have been described in the paper, together with the hydraulic setup introduced to characterize the flow behaviour through the calibrated orifices. An extensive validation of the model has been performed by comparing the modelled mass flow rate against the experimental results introduced in the first part of the paper, which were performed for different engine-like operating conditions involving a wide range of fuel temperatures, injection pressures and energizing times. In that first part of the study, an important influence of the fuel temperature was reported, especially in terms of the dynamic behaviour of the injector, due to its ballistic nature. The results from the model have allowed to explain and further extend the findings of the experimental study by analyzing key features of the injector dynamics, such as the pressure drop established in the control volume due to the control orifices performance or the forces due to viscous friction, also assessing their influence on the needle lift laws., This work was partly sponsored by "Ministerio de Economia y Competitividad" (Spain) in the frame of the project "Comprension de la influencia de combustibles no convencionales en el proceso de inyeccion y combustion tipo diesel", reference TRA2012-36932. The equipment used in this work has been partially supported by FEDER (Spain) project funds "Dotacion de infraestructuras cientifico tecnicas para el Centro Integral de Mejora Energetica y Medioambiental de Sistemas de Transporte (CiMeT), (FEDER-ICTS-2012-06)", in the frame of the operation program of unique scientific and technical infrastructure of the Ministry of Science and Innovation of Spain. This support is gratefully acknowledged by the authors.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

A comprehensive probabilistic solution of random SIS-type epidemiological models using the Random Variable Transformation technique

  • M.-C. Casabán|||0000-0002-5708-5709
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Romero, José-Vicente|||0000-0003-3366-6557
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Villanueva Micó, Rafael Jacinto|||0000-0002-0131-0532
  • Navarro-Quiles, A.
[EN] This paper provides a complete probabilistic description of SIS-type epidemiological models where all the input parameters (contagion rate, recovery rate and initial conditions) are assumed to be random variables. By applying the Random Variable Transformation technique, the first probability density function, the mean and the variance functions as well as confidence intervals associated to the solution of SIS-type epidemiological models are determined under the general hypothesis that the random inputs have any joint probability density function. The distributions to describe the time until a given proportion of the population remains susceptible and infected are also determined. Lastly, a probabilistic description of the so-called basic reproductive number is included. The theoretical results are applied to an illustrative example showing good fitting., This work has been partially supported by the Ministerio de Economia y Competitividad grants MTM2013-41765-P and TRA2012-36932. Ana Navarro Quiles acknowledges the doctorate scholarship granted by Programa de Ayudas de Investigacion y Desarrollo (PAID), Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publication Artículo científico (JournalArticle)

Probabilistic solution of random Riccati-type differential equations appearing in epidemiological models

  • M.-C. Casabán|||0000-0002-5708-5709
  • Cortés, J.-C.|||0000-0002-6528-2155
  • Roselló, María-Dolores|||0000-0002-5724-7683
  • Navarro Quiles, Ana
[EN] This paper deals with the probabilistic solution of random Riccati-type differential equations that appear in a class of epidemiological models usually referred to as SIS-type models. Taking advantage of Random Variable Transformation technique, the first probabilistic density function of the solution stochastic process of that class of random differential equations is determined by two different ways. This permits to characterize, from a probabilistic point of view, the solution in every time instant and to compute its expectation, variance and confidence intervals. The obtained results are very general since all the model input parameters are assumed to be random variables with an arbitrary joint probability density function., This work has been partially supported by the Ministerio de Economía y Competitividad grants MTM2013-41765-P and TRA2012-36932. Ana Navarro Quiles acknowledges the doctorate scholarship granted by Programa de Ayudas de Investigación y Desarrollo (PAID), Universitat Politècnica de València.