Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 30
Encontrada(s) 1 página(s)

Repisalud
Publicación Artículo científico (JournalArticle)

Novel association of the obesity risk-allele near Fas Apoptotic Inhibitory Molecule 2 (FAIM2) gene with heart rate and study of its effects on myocardial infarction in diabetic participants of the PREDIMED trial

  • Corella, Dolores
  • Sorli, Jose V.
  • Gonzlez, Jose I.
  • Ortega, Carolina
  • Fit, Montserrat
  • Bull, Monica
  • Martinez-Gonzalez, Miguel Angel
  • Ros, Emilio
  • Ars, Fernando
  • Lapetra, Jose
  • Gmez-Gracia, Enrique
  • Serra-Majem, Lluis
  • Ruiz-Gutierrez, Valentina
  • Fiol, Miquel
  • Coltell, Oscar
  • Vinyoles, Ernest
  • Pinto, Xavier
  • Marti, Amelia
  • Saiz, Carmen
  • Ordovas, Jose M
  • Estruch, Ramn
Background: The Fas apoptotic pathway has been implicated in type 2 diabetes and cardiovascular disease. Although a polymorphism (rs7138803; G > A) near the Fas apoptotic inhibitory molecule 2 (FAIM2) locus has been related to obesity, its association with other cardiovascular risk factors and disease remains uncertain. Methods: We analyzed the association between the FAIM2-rs7138803 polymorphism and obesity, blood pressure and heart rate in 7,161 participants (48.3\% with type 2 diabetes) in the PREDIMED study at baseline. We also explored gene-diet interactions with adherence to the Mediterranean diet (MedDiet) and examined the effects of the polymorphism on cardiovascular disease incidence per diabetes status after a median 4.8-year dietary intervention (MedDiet versus control group) follow-up. Results: We replicated the association between the FAIM2-rs7138803 polymorphism and greater obesity risk (OR: 1.08; 95\% CI: 1.01-1.16; P = 0.011; per-A allele). Moreover, we detected novel associations of this polymorphism with higher diastolic blood pressure (DBP) and heart rate at baseline (B = 1.07; 95\% CI: 0.97-1.28 bmp in AA vs G-carriers for the whole population), that remained statistically significant even after adjustment for body mass index (P = 0.012) and correction for multiple comparisons. This association was greater and statistically significant in type-2 diabetic subjects (B = 1.44: 95\% CI: 0.23-2.56 bmp; P = 0.010 for AA versus G-carriers). Likewise, these findings were also observed longitudinally over 5-year follow-up. Nevertheless, we found no statistically significant gene-diet interactions with MedDiet for this trait. On analyzing myocardial infarction risk, we detected a nominally significant (P = 0.041) association in type-2 diabetic subjects (HR: 1.86; 95\% CI: 1.03-3.37 for AA versus G-carriers), although this association did not remain statistically significant following correction for multiple comparisons. Conclusions: We confirmed the FAIM2-rs7138803 relationship with obesity and identified novel and consistent associations with heart rate in particular in type 2 diabetic subjects. Furthermore, our results suggest a possible association of this polymorphism with higher myocardial infarction risk in type-2 diabetic subjects, although this result needs to be replicated as it could represent a false positive.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Real-world validation of a modular digital architecture in plastic manufacturing SMEs

  • López Almendros, Alfonso
  • Aguilar Pérez, Tamara
[EN] This article presents the real-world validation of a modular digital architecture designed for plastic manufacturing SMEs, based on principles from Industry 4.0, software engineering, modular system design, and data integration. The proposed architecture enables interoperable data flows between production assets and digital layers, supporting digital-twin-based visualization and improved decision-making. A set of industrial experiments were deployed to evaluate real-time data capture, system scalability, and compatibility with existing infrastructure. Results demonstrate that modular and service-oriented design patterns accelerate digital transformation in SMEs, while offering a reliable foundation for future integration with extended reality (XR/VR) interfaces and simulation environments., This research was funded by the European Union and the Regional Government of Valencia through the FEDER operational program (Grant No. IMDEEA/2021/46 and IMDEEA/2023/47). The authors gratefully acknowledge the technical contributions and collaboration of the participating companies. The work was carried out at AIJU-Technological Institute for Children's Products and Leisure - as part of its research activities in industrial digital transformation for SMEs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A case study exploring oral language choice between the target language and the L1s in mainstream CLIL and EFL secondary education

  • Gené Gil, Maria
  • Juan Garau, Maria
  • Salazar Noguera, Joana
[EN] This case study explores the purposes for which the target language (TL) and the L1s were used orally by students (N=60) and teachers (N=3) in a mainstream CLIL secondary education context compared to EFL instruction in the Balearic Islands (Spain). Data were gathered by means of questionnaires addressed to students and teachers, oral interviews to instructors and observations of class sessions. The findings show some differences in the languages chosen to speak according to pedagogical functions ¿i.e. planned subject-based discourse¿ and real functions ¿i.e. unplanned discourse such as disciplinary or organizational matters¿ (Chavez 2003), with the TL being much more spoken in the former and with much lesser presence of the TL in the latter, especially in the case of the pupils. Moreover, specialized subject-matter terminology was almost always used in the TL by both the students and the teachers, even when speaking in the L1., Our gratitude goes to the Spanish Ministry of Science and Innovation for their generous funding (FF1 2010-21483-C02-01/02). This research has been conducted within the competitive research group ALLENCAM, funded by the Catalan Government (SGR2005-01086/2009-140). Thanks are also due to all the students and teachers from IES Son Pacs (Palma) involved in this research – especially Antònia Vidal, Catherine Cobb, Maria Cloquell and Antoni Quintana. We appreciate the feedback of anonymous peer reviewers, which contributed to improving this paper.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Review of instabilities produced by direct contact condensation of steam injected in water pools and tanks

  • J. L. Muñoz-Cobo|||0000-0002-4512-7991
  • Blanco-Muelas, David|||0000-0003-2958-0558
  • Berna-Escriche, César|||0000-0002-2097-5089
  • Córdova, Y.
[EN] The purpose of this paper is to review and analyze several types of instabilities as condensation oscillations (CO), stable condensation oscillations (SC), and bubbling condensation oscillation (BCO). These instabilities are pro-duced during the discharge of steam into subcooled pools through vents or spargers. The mechanism of direct contact condensation (DCC) plays an essential role in these instabilities justifying that we review first the fundamental basis of DCC and the jet penetration length for the discharges of pure steam in subcooled water. Then, special attention is devoted to developing correlations for the nondimensional penetration length for ellipsoidal or hemi-ellipsoidal prolate steam jets observed in many experiments, to the heat transfer coefficients of DCC and to the best way to correlate the penetration length. Next, it is analyzed the stability of the steam jets with hemi-ellipsoidal shape in the transition and condensation oscillation regimes and it is computed the sub -cooling temperature threshold for low and high oscillation frequencies. These results for the subcooling tem-perature thresholds for low and high frequencies with a hemi-ellipsoidal steam jet are then compared with the results for spherical and cylindrical jets and with the experimental data in an interval of mass fluxes ranging from 0 to 180 kg/m2s. In addition, a sensitivity analysis is performed to know the dependence of the low and high frequency liquid temperature thresholds on the vent diameter and the polytropic coefficient. The third part of the paper is devoted to the study of the instabilities produced in the stable condensation (SC) and the interfacial condensation oscillations (IOC) regions of the map. First Hong et al. model (2012) is extended to include the entrainment in the liquid dominated region (LDR), obtaining new expressions for the oscillations frequency that depend on the entrainment coefficient and the expansion of the jet in the liquid dominated region. Finally, the mechanical energy balance is extended to include the momentum transferred to the jet by the condensate steam, obtaining a new equation for the frequency that is compared with Hong et al.'s data for a set of pool temperatures ranging from 35 degrees C to 90 degrees C and discharge mass steam fluxes ranging from 200 to 900 kg/m2s., One of the authors of this project received a Grisolía scholarship to perform his PhD. The authors of this paper are indebted to Generalitat Valenciana (Spain) by its support under the Grisolía scholarship program.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Antibiotics mineralization by electrochemical and UV-based hybrid processes: evaluation of the synergistic effect

  • da Silva, Salatiel W.
  • Heberle, Alan N.A.
  • Santos, Alexia P.
  • Rodrigues, M.A.S.
  • Bernardes, A.M.
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] Antibiotics are not efficiently removed in conventional wastewater treatments. In fact, different advanced oxidation process (AOPs), including ozone, peroxide, UV radiation, among others, are being investigated in the elimination of microcontaminants. Most of AOPs proved to be efficient on the degradation of antibiotics, but the mineralization is on the one hand not evaluated or on the other hand not high. At this work, the UV-based hybrid process, namely Photo-assisted electrochemical oxidation (PEO), was applied, aiming the mineralization of microcontaminants such as the antibiotics Amoxicillin (AMX), Norfloxacin (NOR) and Azithromycin (AZI). The influence of the individual contributions of electrochemical oxidation (EO) and the UV-base processes on the hybrid process (PEO) was analysed. Results showed that AMX and NOR presented higher mineralization rate under direct photolysis than AZI due to the high absorption of UV radiation. For the EO processes, a low mineralization was found for all antibiotics, what was associated to a mass-transport limitation related to the low concentration of contaminants (200 ¿g/L). Besides that, an increase in mineralization was found, when heterogeneous photocatalysis and EO are compared, due to the influence of UV radiation, which overcomes the mass-transport limitations. Although the UV-based processes control the reaction pathway that leads to mineralization, the best results to mineralize the antibiotics were achieved by PEO hybrid process. This can be explained by the synergistic effect of the processes that constitute them. A higher mineralization was achieved, which is an important and useful finding to avoid the discharge of microcontaminants in the environment., The authors thank CAPES project number DGPU-2015/7595/14-0, CNPq, FAPERGS, Cyted and FINEP for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Memorizing Schroder&apos, s Method as an Efficient Strategy for Estimating Roots of Unknown Multiplicity

  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
  • Neta, Beny
[EN] In this paper, we propose, to the best of our knowledge, the first iterative scheme with memory for finding roots whose multiplicity is unknown existing in the literature. It improves the efficiency of a similar procedure without memory due to Schroder and can be considered as a seed to generate higher order methods with similar characteristics. Once its order of convergence is studied, its stability is analyzed showing its good properties, and it is compared numerically in terms of their basins of attraction with similar schemes without memory for finding multiple roots., This research was partially supported by PGC2018-095896-B-C22 (MCIU/AEI/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Novel Pavement Abrasion Test for Assessing Injury Risk to Vulnerable Road Users

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Alonso-Troyano, C.|||0000-0001-5784-0578
  • García García, Alfredo|||0000-0003-1345-3685
  • Álvarez-Troncoso, Pablo
  • Marzá-Beltrán, Aida
[EN] This study introduces a novel and user-centered surface abrasion test designed to assess the injury potential of pavement surfaces, particularly for vulnerable road users such as micromobility users. Traditional pavement evaluation methods focus on skid resistance and texture but do not account for the surface¿s mechanical aggressiveness during a fall. To address this gap, the proposed test simulates fall conditions by dragging a paraffin wax specimen¿used as a low-cost and reproducible proxy to approximate the abrasive re-sponse that could affect human skin¿over pavement at a controlled speed and load, quantifying material loss as an indicator of surface abrasiveness. The method was vali-dated on three pavement types (smooth ceramic, bituminous, and concrete), demon-strating its sensitivity and repeatability. Unlike conventional point-based tests, it enables continuous evaluation along a predefined length, offering more representative results. A full-scale case study on a micromobility-dedicated bike lane confirmed the test¿s re-sponsiveness to surface changes over time. Results suggest the method is practical, re-producible, and applicable to a wide range of pavements. Beyond micromobility, it can be extended to other vulnerable users, such as motorcyclists. The test represents a new metric for infrastructure safety audits focused on injury mitigation., This research was funded by the Valencian Innovation Agency (AVI) and the European Union through the Operational Program of the European Regional Development Fund (ERDF), grant number INNCAD/2021/140.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Forecasts for full decarbonization of the economy in off-grid systems with high end-use consumption rates through combined electricity and hydrogen deployment, the Canary Islands in 2040

  • Rivera-Durán, Yago
  • Córdova, Yaisel
  • Berna-Escriche, César|||0000-0002-2097-5089
  • Álvarez-Piñeiro, Lucas|||0000-0002-9450-2479
  • Blanco-Muelas, David|||0000-0003-2958-0558
[EN] This article explores the complete decarbonization of the Canary Archipelago's economy. The proposed scenario uses electric and hydrogen energy vectors to meet all final energy demands at affordable costs. The study considers the technical and economic aspects of the proposed system, as well as an estimation of electricity generation and hydrogen production capacity in 2040, to optimize the system to meet the demand at all times without relying on external sources. The recommended scenario involves the deployment of 7500 MWp of photovoltaic energy, 1076 MWp of wind turbines, and 907 MW of SMRs. Various storage options have been tested to accommodate the unavoidable storage requirements of such stand-alone systems. The selection of reverse-pumping storage with a maximum power output of 2050 MW and a total capacity of approximately 17GWh is sufficient to cover the existing system needs. The total investment required to implement the proposed system until 2040 is estimated at around 29,000 M€, of which approximately 6000 are for the hydrogen subsystem. The proposed system entails significantly less storage capacity and curtailment while enabling the production of sufficient hydrogen to achieve the complete decarbonization of all energy end-uses., The authors would like to express their gratitude to the Generalitat Valenciana (Spain) for its support under the Santiago Grisolía Program/2018/140. The authors would also like to extend their gratitude to the Ministerio de Economía, Industria y Competitividad and by Agencia Nacional de Investigacion ¿ under the FPI grant BES-2017-080031.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Characterization of the Dimensionless Momentum Length for Submerged Jet Discharges of Air-Steam Mixtures into Stagnant Water

  • Y. Córdova
  • Rivera-Durán, Yago
  • Blanco-Muelas, David|||0000-0003-2958-0558
  • Berna-Escriche, César|||0000-0002-2097-5089
  • J. L. Muñoz-Cobo|||0000-0002-4512-7991
  • Escrivá, A.|||0000-0002-9670-068X
[EN] A very efficient method of condensing the steam in various industrial applications is the steam direct discharge into pools with subcooled water. This kind of condensation is known as Direct Contact Condensation (DCC), by providing high heat transfer and mass exchange capacity, the steam condenses quickly. In the past few decades, many experiments have been carried out on the submerged jets of non-condensable gases and pure steam in pools, supplying much information of interest, but efforts are still being made to obtain more information. In particular, the research of steam and non-condensable gas mixtures is of great interest to the chemical, energy, and nuclear industry. Consequently, this study investigates the discharge behavior of air-steam mixtures in a pool with subcooled water by direct visualization techniques using a high-speed camera. To know the behavior of the dimensionless momentum length, tests were carried out considering several initial discharge conditions such as nozzle diameter, percentage of mixture, and flow rates. After image acquisition, a series of complex processing, filtering, and post-processing procedures are applied using a subroutine in MATLAB. The momentum length of the jet was measured and found to be heavily influenced by the nozzle diameter, the jet velocity, and the mixture percentage. A correlation is obtained for the dimensionless momentum length of the horizontal jet that depends on the Froude and Mach numbers., The authors would like to acknowledge the support provided through the Spanish project EXMOTRANSIN ENE2016-79489-C2-1-P and the Santiago Grisolía Program for the training of research personnel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of postural control impairment in women with fibromyalgia

  • Sempere-Rubio, Nuria
  • Lopez Pascual, Juan
  • Aguilar-RodrÍguez, M.
  • Cortés, S.
  • Espi, G.
  • Villarrasa, I.
  • Serra Añó, Pilar
[EN] The main goal of this cross-sectional study was to detect whether women with fibromyalgia syndrome (FMS) have altered postural control and to study the sensory contribution to postural control. We also explored the possibility that self-induced anxiety and lower limb strength may be related to postural control. For this purpose, 129 women within an age range of 40 to 70 years were enrolled. Eighty of the enrolled women had FMS. Postural control variables, such as Ellipse, Root mean square (RMS) and Sample entropy (SampEn), in both directions (i.e. mediolateral and anteroposterior), were calculated under five different conditions. A force plate was used to register the center of pressure shifts. Furthermore, isometric lower limb strength was recorded with a portable dynamometer and normalized by lean body mass. The results showed that women with FMS have impaired postural control compared with healthy people, as they presented a significant increase in Ellipse and RMS values (p<0.05) and a significant decrease in SampEn in both directions (p<0.05). Postural control also worsens with the gradual alteration of sensory inputs in this population (p<0.05). Performing a stressor dual task only impacts Ellipse in women with FMS (p>0.05). There were no significant correlations between postural control and lower limb strength (p>0.05). Therefore, women with FMS have impaired postural control that is worse when sensory inputs are altered but is not correlated with their lower limb strength., This research was supported by Conselleria d'Educacio, Ciencia i Esports [Valencian Regional Department of Education, Science and Sports], Valencia, Spain [Grant GV2016/140]. PSA, NSR, MAR, SCA, GEL, http://www.ceice.gva.es/va/inicio:jsessionid=CB78D8F7BA7A76F84A8827307D23AC5. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generalized Conformable Fractional Newton-Type Method for Solving Nonlinear Systems

  • Candelario-Villalona, Giro Guillermo
  • Vassileva, María P.
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
[EN] In a recent paper, a conformable fractional Newton-type method was proposed for solving nonlinear equations. This method involves a lower computational cost compared to other fractional iterative methods. Indeed, the theoretical order of convergence is held in practice, and it presents a better numerical behaviour than fractional Newton-type methods formerly proposed, even compared to classical Newton-Raphson method. In this work, we design a generalization of this method for solving nonlinear systems by using a new conformable fractional Jacobian matrix, and a suitable conformable Taylor power series; and it is compared with classical Newton's scheme. The necessary concepts and results are stated in order to design this method. Convergence analysis is made and a quadratic order of convergence is obtained, as in classical Newton's method. Numerical tests are made, and the Approximated Computational Order of Convergence (ACOC) supports the theory. Also, the proposed scheme shows good stability properties observed by means of convergence planes., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Partial financial support was received from the Ministerio de Ciencia, Innovacion y Universidades PGC2018-095896-B-C22 and from Dominican Republic FONDOCYT 2018-2019-1D2-140.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Using p-Si/BDD anode for the electrochemical oxidation of norfloxacin

  • Wohlmuth da Silva, Salatiel
  • Siqueira Rodrigues, Marco A.
  • Moura Bernardes, Andréa
  • Ortega Navarro, Emma María|||0000-0001-6902-018X
  • Pérez-Herranz, Valentín|||0000-0002-4010-0888
[EN] This study evaluated the electrochemical advanced oxidation process (EAOP) using boron-doped diamond (p-Si/BDD) anode in the abatement of the antibiotic norfloxacin (NOR). The influence of the applied current density (iapp), initial concentration of NOR, sodium sulfate (Na2SO4) concentration and reactor operation conditions were evaluated. The mechanism of NOR oxidation (direct or indirect) was also studied by cyclic voltammetry and chronoamperometry. The results showed that, depending on the iapp, and the NOR and Na2SO4 concentration, the NOR could be oxidized by direct electron transfer, with the carbon-sp2 impurities on the p-Si/BDD surface, and indirect, by persulfate ions (S2O82¿), sulfate (SO4·¿) and/or hydroxyl radicals (HO) electro-generated at the anode surface. When the reactor is operated favoring the electro-generated HO, NOR abatement and chemical oxygen demand (COD) reduction are simultaneous. Conversely, at the time that the reactor is operated favoring the NOR direct oxidation and by S2O82¿ and SO4·¿, NOR and COD reduction are not parallel leading to high byproducts formation. Therefore, it is important to know the matrix content (organic and sulfate content), for the correct choice of the operational parameters that will lead to a low byproducts formation., The authors thank Cyted, CNPq, CAPES/DGPU project no. 7595/14-0, FAPERGS and FINEP. The authors thank the financial support from MINECO (Ministerio de Economia y Competitividad, Spain) under project CTQ2015-65202-C2-1-R, co-financed with FEDER funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ethylene brassylate as a biobased plasticizer for poly(lactic acid): Evaluation of mechanical, thermal, and biodegradation properties

  • Escriva-Faus, M.
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Mario Nicolás
  • Lázaro-Hernández, C.|||0009-0002-8250-9363
  • Sanchez-Nacher, Lourdes|||0000-0002-8627-4576
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
[EN] Poly(lactic acid) (PLA) is a bio-based polymer with high potential; however, its inherent brittleness restricts its practical applications. This work evaluates ethylene brassylate (EB), a macrocyclic diester of natural origin, as a plasticizer for PLA at 5¿20 wt%. Thermal analysis confirmed a plasticizing effect, with the glass transition temperature decreasing from 59.9 °C in neat PLA to 38.0 °C in PLA-20 EB. Mechanical tests showed that 20 wt% EB increased elongation at break from 10 % (neat PLA) to over 460 % and improved impact resistance by ~70 %. Furthermore, moisture resistance was preserved, and microscopy confirmed good miscibility with no phase separation. Under composting, degradation occurs more rapidly in proportion to EB content, reaching ~90 % mass loss after four weeks. Migration tests revealed values below 40 mg kg¿1 for PLA-EB < 10 wt% EB, whereas PLA-15 EB reached the regulatory limit. EB is therefore an efficient bio-based plasticizer for PLA, offering enhanced ductility, toughness, and biodegradation, with promising applications in sustainable packaging, especially for refrigerated and cold-chain storage., This research is a part of the grant PID2023-152869OB-C22, and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/ 501100011033 and by the European Union NextGenerationEU /PRTR. The authors also thank Generalitat Valenciana - GVA, grant number CIGE/2023/46 and CIAICO/2023/253, for supporting this work. Microscopy services at UPV are also acknowledged for their help in collecting and analyzing FESEM images. D.L. thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program cofunded by ESF Investing in your future, grant number CIAPOS/2022/140. C. Lazaro-Hdez thanks Generalitat Valenciana - GVA for funding a predoc position through the CIACIF program co-funded by ESF Investing in your future, grant number CIACIF/2023/244. M. Miranda-Pinzon thanks the Vice-rectorate for Research of the Universitat Politecnica de Valencia (UPV) for funding a predoctoral contract in the PAID-01-24 program. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D-printed mineral limestone structures for calcium looping thermochemical energy storage: reactivity and performance across cycles

  • Castro-Chincho, Ana
  • Perejón, Antonio
  • Sanchez-Jimenez, Pedro E.
  • Ramírez-Rico, Joaquín
  • Pérez-Maqueda, Luis A.
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
[EN] This work presents a proof of concept for the use of 3D-printed CaCO¿ structures, prepared from low-cost and widely available mineral limestone, as an innovative approach for thermochemical energy storage (TCES) via the calcium looping (CaL) process in a fixed-bed reactor. These structures offer significant advantages in terms of reaction efficiency, gas flow control, structural stability, and maintenance. These factors are critical for achieving uniform reaction surface distribution and effective thermal management. The 3D structures were fabricated by robocasting and subjected to various debinding and calcination conditions. They maintained their structural integrity and exhibited high reactivity over multiple carbonation-calcination cycles. Under scheme 1 conditions (calcinations in nitrogen), the printed structures retained a CaO conversion of 0.44 after 50 cycles, corresponding to an energy density of 1.39 MJ kg¿ 1 CaO, outperforming the powdered sample, which reached a conversion of 0.32. Advanced characterization techniques, including thermography, scanning electron microscopy, and X-ray computed tomography, highlight the internal structural advantages of the 3D structures. Overall, this study demonstrates the potential of 3D-printed CaCO¿ structures as scalable and efficient TCES materials, offering a promising route toward improving the performance and practical deployment of solid-state thermochemical energy storage systems., Financial support is acknowledged from grant TED2021-131839B-C22 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR, and the grant PID2022-140815OB-C22 funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. D.L. and J. I.-M. thank Generalitat Valenciana-GVA for funding their postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant numbers CIAPOS/2022/140 and CIAPOS/2023/362. Financial support provided by VII PPIT of the University of Seville for the use of the General Research Services (CITIUS) is acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimizing biobased thermoset resins by incorporating cinnamon derivative into acrylated epoxidized soybean oil

  • Lascano-Aimacaña, Diego Sebastián|||0000-0002-0996-1946
  • Gómez-Caturla, Jaume|||0000-0001-8680-4509
  • Garcia-Sanoguera, David|||0000-0002-1923-9519
  • Garcia-Garcia, Daniel|||0000-0002-2520-0186
  • Ivorra-Martinez, Juan|||0000-0001-8968-4899
[EN] The study successfully developed thermoset materials utilizing acrylate epoxidized soybean oil (AESO) and allyl cinnamate (ACIN) with tert-butyl peroxybenzoate (TBPB) as the initiator. Isothermal curing at temperatures between 110 °C to 140 °C of the developed formulations, showed that higher temperatures accelerated the conversion process. The higher curing temperature increased the degree of conversion, leading to obtain the best flexural strength for samples cured at 130 °C. However, samples cured at 120 °C exhibited better impact properties due to a lower degree of conversion, which allows for a more mobile reticular network. In addition, morphological observations confirmed these mechanical property trends. Dynamic thermal characterization revealed changes in glass transition temperature and exothermic reactions due to unreacted products appeared for materials cured at low temperature. Increasing curing temperature allowed to enhance thermal stability by increasing molecular weight. Finally, thermomechanical analysis confirmed stiffness and glass transition temperature increases observed during flexural tests and thermal characterization., This research is a part of the grant PID2020-116496RB-C22, funded by MCIN/AEI/10.13039/501100011033 and the grant TED2021-131762A-I00, funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU /PRTR. Authors also thank Generalitat Valenciana-GVA for funding this research through the grant numbers AICO/2021/025 and CIGE/2021/094. D.L. thanks Generalitat Valenciana - GVA for funding a postdoc position through the CIAPOS program co-funded by ESF Investing in your future, grant number CIAPOS/2022/140. J. G.-C. wants to thank FPU20/01732 grant funded by MCIN/AEI/10.13039/ 501100011033 and by ESF Investing in your future.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Towards highly sustainable asphalt mixtures using RAP and ceramic waste

  • Alonso-Troyano, C.|||0000-0001-5784-0578
  • Llopis-Castelló, David|||0000-0002-9228-5407
  • García García, Alfredo|||0000-0003-1345-3685
[EN] The European Union promotes transitioning to a circular economy, prioritizing waste management as a key element of sustainable development. In this context, this study evaluates the structural performance of asphalt mixtures incorporating Reclaimed Asphalt Pavement (RAP) and ceramic waste, focusing on maximizing recycled material usage while meeting Spanish pavement standards for low-volume roads. While recycled materials in asphalt mixtures are widely studied, limited research has addressed the combined use of RAP and ceramic waste. Three sustainable AC16 S asphalt mixtures were designed with recycled content ranging from 85¿% to 100¿% and evaluated through water sensitivity, wheel tracking, stiffness, and resistance to fatigue tests. The results indicate that the C50R50 mixture, comprising 50¿% RAP and 50¿% ceramic waste, achieves performance comparable to conventional asphalt mixtures made with natural aggregates. It meets all Spanish standards for low- and medium-volume roads, demonstrating satisfactory stiffness (approximately 7000¿MPa) and resistance to fatigue, reaching 80¿% of the endurance of conventional mixtures. Conversely, the C100 mixture (100¿% ceramic waste) exhibited reduced stiffness, water sensitivity, and workability, limiting its applicability. The C50R50 mixture showed acceptable deformation indices and superior workability, making it also suitable for urban pavements and micromobility infrastructure, including bike lanes. The C35R50A15 mixture (50¿% RAP, 35¿% ceramic waste, and 15¿% limestone aggregate) achieved marginal compliance, suggesting potential for similar applications. These results demonstrate the feasibility of sustainable asphalt mixtures to meet performance standards, offering an environmentally friendly alternative for road construction and maintenance in low- and medium-traffic applications., This research was funded by the Valencian Innovation Agency (AVI) and the European Union through the Operational Program of the European Regional Development Fund (ERDF) , grant number INNCAD/2021/140.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generalized inverses estimations by means of iterative methods with memory

  • Artidiello, Santiago
  • Vassileva, María P.
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
[EN] A secant-type method is designed for approximating the inverse and some generalized inverses of a complex matrix A. For a nonsingular matrix, the proposed method gives us an approximation of the inverse and, when the matrix is singular, an approximation of the Moore-Penrose inverse and Drazin inverse are obtained. The convergence and the order of convergence is presented in each case. Some numerical tests allowed us to confirm the theoretical results and to compare the performance of our method with other known ones. With these results, the iterative methods with memory appear for the first time for estimating the solution of a nonlinear matrix equations., This research was supported by PGC2018-095896-B-C22 (MCIU/AEI/FEDER, UE), Generalitat Valenciana PROMETEO/2016/089, and FONDOCYT 029-2018 Republica Dominicana.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Sustainable Asphalt Mixtures for Bike Lanes Using RAP and Ceramic Waste as Substitutes for Natural Aggregates

  • Llopis-Castelló, David|||0000-0002-9228-5407
  • Alonso-Troyano, C.|||0000-0001-5784-0578
  • García García, Alfredo|||0000-0003-1345-3685
  • Álvarez-Troncoso, Pablo
  • Marzá-Beltrán, Aida
[EN] The European Union is promoting a circular economy in which waste management plays an essential role. Although many studies focusing on the use of recycled materials in the manufacture of asphalt mixtures for roads have been developed, studies related to the use of recycled materials for the construction of bike lanes are scarce. In this context, the main objective of this research is to explore the behaviour of asphalt mixtures with high replacement rates of recycled materials¿reclaimed asphalt pavement (RAP) and ceramic waste¿by natural aggregates for the construction of bike lanes. A total of six types of asphalt mixtures were designed by combining the content of the recycled materials and natural aggregates, with replacement rates ranging from 50% to 100%. The asphalt mixtures were characterized by determining the bulk and maximum density; the void content in the mixture; and the aggregate, stability, and deformation. In conclusion, the mixture C50R50, which consists of a full replacement of natural fine and coarse aggregates by 50% ceramic waste aggregate and 50% RAP, is proposed as the most appropriate sustainable solution. In this way, the use of this asphalt mixture allows for boosting the use of recycled aggregates as well as minimizing the consumption of virgin bitumen due to its residual bitumen content. Compared to the reference asphalt mixture consisting of 100% of natural aggregates, C50R50 is a more open mixture, with higher void content and somewhat more brittleness. Even so, the mixture C50R50 could be good enough for use in low traffic roads., This research was funded by the Valencian Innovation Agency (AVI) and the European Union through the Operational Program of the European Regional Development Fund (ERDF), grant number INNCAD/2021/140.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical simulation of air discharged in subcooled water pool

  • Córdova, Y.
  • Rivera, Y.
  • Blanco-Muelas, David|||0000-0003-2958-0558
  • Berna-Escriche, César|||0000-0002-2097-5089
  • J. L. Muñoz-Cobo|||0000-0002-4512-7991
  • Escrivá, A.|||0000-0002-9670-068X
[EN] Turbulent jet discharges in subcooled water pools are essential for safety systems in nuclear power plants, specifically in the pressure suppression pool of boiling water reactors and In-containment Refueling Water Storage Tank of advanced pressurized water reactors. The gas and liquid flow in these systems is investigated using multiphase flow analysis. This field has been extensively examined using a combination of experiments, theoretical models, and Computational Fluid Dynamics (CFD) simulations. ANSYS CFX offers two approaches to model multiphase flow behavior. The non-homogeneous Eulerian-Eulerian Model has been used in this work; it computes global information and is more convenient to study interpenetrated fluids. This study utilized the Large Eddy Simulation Model as the turbulence model, as it is better suited for non-stationary and buoyant flows. The CFD results of this study were validated with experimental data and theoretical results previously obtained. The figures of merit dimensionless penetration length and the dimensionless buoyancy length show good agreement with the experimental measurements. Correlations for these variables were obtained as a function of dimensionless numbers to give generality using only initial boundary conditions. CFD numerical model developed in this research has the capability to simulate the behavior of non-condensable gases discharged in water., This work was supported by the project THAIS co-financed by the CSN (Nuclear Safety Council of Spain) and the UPV (Polytechnical University of Valencia). The authors also would like to express gratitude to the Generalitat Valenciana (Spain) for its support under the Santiago Grisolia Program/2018/140.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximizing the use of hydrogen as energy vector to cover the final energy demand for stand-alone systems, application and sensitivity analysis for the Canary Archipelago by 2040

  • Berna-Escriche, César|||0000-0002-2097-5089
  • J. L. Muñoz-Cobo|||0000-0002-4512-7991
  • Rivera-Durán, Yago
  • Córdova-Chávez, Yaisel
[EN] Fossil fuel-based economies must undergo a deep transition for complete decarbonization. To this end, it is widely recognized that all economies must move towards the electrification of energy end uses. Even though there is a part that cannot be electrified, at least at affordable costs; clear examples are heavy road transport, maritime and air transport, and some industrial processes. As a result of the limitations of electrification in certain energy end uses, the potential use of hydrogen as an alternative energy carrier has been examined in recent decades. Hydrogen is seen as a viable option for the medium to long term. Specifically, efforts are being made in the case of the Canary Islands to move towards a carbon-free energy mix. In fact, the aim is to advance the economy decarbonization by 10 years over the date foreseen for both Europe and the rest of Spain. To this end, the HOMER program has been used to analyze the possibility of producing the necessary hydrogen in a scenario applied to the Canary Islands in which the uses of this energy vector have been maximized. This research considers two possible scenarios, together with a sensitivity analysis under the different uncertain conditions associated with the used technologies. The results have been the estimation of hydrogen production costs for high demands, about 230,000 tH2/year, in 2040 for an isolated archipelago under two totally different generation scenarios. The first scenario is totally renewable, while the other is based on nuclear generation by means of high-temperature SMRs. The results show, that it would be possible to produce at a cost in the range of 1 euro/kgH2 using nuclear technology and around 4 euro/kgH2 using renewables, with uncertainty cost ranges of around 40%, i.e. costs between 0.85-1.48 and 3.29-4.99 euro kgH2 respectively., The authors would like to express their gratitude to the Generalitat Valenciana (Spain) for its support under the Santiago Grisolia Program/2018/140. The authors also would like to extend their gratitude to the Ministerio de Economia, Industria y Competitividad and by Agencia Nacional de Investigacion under the FPI grant BES-2017-080031.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

An optimal and low computational cost fractional Newton-type method for solving nonlinear equations

  • Candelario Villalona, Giro Guillermo
  • Vassileva, Maria P.
  • Cordero Barbero, Alicia|||0000-0002-7462-9173
  • Torregrosa Sánchez, Juan Ramón|||0000-0002-9893-0761
[EN] In recent papers, some fractional Newton-type methods have been proposed by using the Riemann-Liouville and Caputo fractional derivatives in their iterative schemes, with order 2 alpha or 1+alpha. In this manuscript, we introduce the Conformable fractional Newton-type method by using the so-called fractional derivative. The convergence analysis is made, proving its quadratic convergence, and the numerical results confirm the theory and improve the results obtained by classical Newton's method. Unlike previous fractional Newton-type methods, this one involves a low computational cost, and the order of convergence is at least quadratic. (C) 2021 Elsevier Ltd. All rights reserved., This research was partially supported by Ministerio de Ciencia, Innovacion y Universidades PGC2018-095896-B-C22 and by Dominican Republic FONDOCYT 2018-2019-1D2-140
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Initiatives towards a participatory smart city. The role of digital grassroots innovations

  • Boni Aristizábal, Alejandra|||0000-0003-3945-4336
  • Fernández-Baldor, Álvaro|||0000-0001-8048-2916
  • Lopez-Fogues, Aurora
  • Millan, Gynna
  • Belda-Miquel, Sergio
[EN] In this paper we explore the role of Digital Grassroots Innovation (DGI) in the construction of a more participatory smart city. 18 DGIs from four Spanish cities (Santander, Valencia, Bilbao, and San Sebastián) were analysed. They belong to 4 different types of digital innovation: Open Hardware: understood as projects inspired by the maker movement; Open Knowledge: large groups of citizens who join through online platforms to collectively create a new type of knowledge or social projects; Open Data: innovative ways of opening, capturing, using, analysing and interpreting data; and Open Networks: networks of citizens who are developing new networks and infrastructures, to collectively share resources and solve problems. In all cases, the DGIs constitute a varied repertoire of initiatives where the purpose of digital innovation is not only to solve problems that affect citizens, but also to make spaces for the creation and empowerment of critical citizens that are vigilant of the actions of public and private powers. In this sense, innovation not only refers to the design and materialisation of new products or processes, but also to the contribution that the DGI is making to the construction of citizenship and, therefore, to the construction of democracy., This work was supported by INAP [grant number 140] and Plan Estatal de I + D+i under [grant number CSO2016-80152-R]. Ministerio de Ciencia e Innovación.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influencia de la obesidad y la ganancia de peso sobre la calidad de vida según el SF-36 en individuos de la cohorte dinámica Seguimiento Universidad de Navarra

  • Barcones-Molero, M.F.
  • Sánchez-Villegas, A.
  • Martínez-González, M.A.
  • Bes-Rastrollo, M.
  • Martínez-Urbistondo, M.
  • Santabárbara, J.
  • Martínez, J.A.
Antecedentes La calidad de vida relacionada con la salud es un elemento importante en la valoración integral del sobrepeso y la obesidad. Objetivo Evaluar el impacto de la obesidad y la ganancia de peso sobre la calidad de vida relacionada con la salud en la cohorte dinámica Seguimiento Universidad de Navarra. Materiales y métodos Los análisis incluyeron a 10.033 participantes de la cohorte dinámica prospectiva del Proyecto Seguimiento Universidad de Navarra, con una tasa de respuesta de aproximadamente el 90%. La calidad de vida fue medida con la versión abreviada de la Encuesta de Salud (SF-36) (0: peor calidad de vida, 100: mejor calidad de vida). El análisis estadístico se realizó con modelos lineales generalizados (media de cada dominio del SF-36 e IC al 95%). Una diferencia de 3 puntos fue considerada como clínicamente relevante. Resultados El análisis del SF-36 mostró que la función física, la salud general y la variable física sumario fueron inferiores en las personas con sobrepeso y obesidad al inicio del estudio que en los individuos con normopeso. La población a estudio con sobrepeso u obesidad sin cambios tras 2 años de seguimiento presentó peores puntuaciones en los dominios del SF-36 correspondientes a la función física, dolor corporal, variable física sumario y salud general que los individuos que mantuvieron la categoría del normopeso según el IMC (kg/m2). Conclusiones La obesidad parece asociarse a un impacto negativo sobre la calidad de vida relacionada con la salud, que afecta más significativamente al área física que a la psicosocial. Background: The health-related quality of life is an important element for the comprehensive assessment of overweight and obesity. Objective: To assess the impact of obesity and weight gain on the health-related quality of life of the dynamic cohort of the Follow-up Program of the University of Navarra. Material and methods: The analysis included 10, 033 participants of the prospective dynamic cohort of the Follow-up Project of the University of Navarra, with a response rate of approximately 90%. The quality of life was measured with the Short Form 36 Health Survey (SF-36) (0, worst quality of life; 100, best quality of life). The statistical analysis was performed with generalized lineal models (mean of each SF-36 domain and 95% CI). A difference of 3 points was considered clinically relevant. Results: The SF-36 analysis showed that physical function, general health and the physical component summary were inferior in individuals with excess weight and obesity at the start of the study, compared with individuals with normal weight. The study population with unchanged excess weight or obesity after 2 years of follow-up presented lower scores on the SF-36 domains corresponding to physical function, body pain, physical component summary and general health than individuals who maintained the normal weight category according to BMI (kg/m2). Conclusions: Obesity appears to be associated with a negative impact on health-related quality of life, affecting the physical area more significantly than the psychosocial.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Adherence to the 2025–2030 dietary guidelines (DGA) and risk of all-cause and cause-specific mortality: A prospective analysis in a middle-aged cohort

  • Menezes-Júnior, Luiz
  • Martínez-González, Miguel Ángel
  • Martínez, J. Alfredo
  • de la Fuente-Arrillaga, Carmen
  • Moreno, Luis A.
  • Bes-Rastrollo, Maira
Background & aims The 2025–2030 Dietary Guidelines for Americans (DGA) shifted toward a model expanding animal-based proteins and fats, with unknown impacts on long-term survival. This study aimed to evaluate the association between adherence to the 2025–2030 DGA and all-cause and cause-specific mortality, compared with the traditional Mediterranean Diet (MedDiet). Methods Prospective cohort study of university graduates. A total of 17,855 participants [10,928 women (61.2%) and 6927 men; mean age 37.2 years], initially free of chronic diseases, followed-up every two years. At baseline a validated 136-item semi-quantitative food frequency questionnaire was used to build two dietary indices: 1) A score of adherence to the 2025–2030 DGA (theoretical range 0–28 points); and 2) A well-known 9-item Mediterranean Diet Score (MDS) appraising adherence to the traditional MedDiet. The primary outcome was all-cause mortality, verified through the National Death Index. Secondary outcomes included cardiovascular (CVD) and cancer mortality. Multivariable Cox models estimated hazard ratios (HR) and 95% confidence intervals (CI) across categories (roughly quartiles: Q1-Q4) of dietary indices. Results Over a 14.3-year median follow-up, 525 deaths occurred. Comparing highest (Q4) to lowest (Q1) adherence, the 2025–2030 DGA showed no significant association with all-cause (HR = 0.87; 95%CI:0.67–1.13), CVD (HR = 1.62; 0.86–3.04), or cancer mortality (HR = 0.82; 0.57–1.17). Conversely, high MedDiet adherence (Q4 vs. Q1) was inversely associated with all-cause (HR = 0.68; 0.50–0.92), CVD (HR = 0.39; 0.18–0.85), and cancer mortality (HR = 0.59; 0.40–0.88). Specific plant-based DGA components and limiting processed meats showed independent inverse mortality associations. Conclusions Adherence to the DGA 2025–2030 does not appear to be associated with reduced mortality in this cohort. In contrast, the traditional MedDiet remains strongly associated with lower risks of premature death, including CVD deaths, and cancer deaths. Dietary recommendations should prioritize the MedDiet over the recent DGA 2025–2030 and particularly some features common to both dietary models.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Blood pressure values and depression in hypertensive individuals at high cardiovascular risk

  • Mejia-Lancheros, Cilia|||0000-0003-1131-8439
  • Estruch, Ramón|||0000-0003-1260-4445
  • Martínez González, Miguel Ángel|||0000-0002-3917-9808
  • Salas-Salvadó, Jordi|||0000-0003-2700-7459
  • Corella, Dolores|||0000-0002-2366-4104
  • Gómez-Gracia, Enrique
  • Fiol-Sala, Miquel
  • Fitó, Montserrat|||0000-0002-1817-483X
  • Arós, Fernando
  • Serra-Majem, Luís|||0000-0002-9658-9061
  • Pintó, Xavier|||0000-0002-2216-2444
  • Basora, Josep|||0000-0003-0278-1149
  • Sorlí, José V.|||0000-0002-0130-2006
  • Muñoz, Miguel-Angel|||0000-0002-4083-3248
Hypertension and depression are both important risk factors for cardiovascular diseases. Nevertheless, the association of blood pressure on and depression has not been completely established. This study aims to analyze whether depression may influence the control of blood pressure in hypertensive individuals at high cardiovascular risk. Cross-sectional study, embedded within the PREDIMED clinical trial, of 5954 hypertensive patients with high cardiovascular risk factor profiles. The relationship between blood pressure control and depression was analyzed. A multivariate analysis (logistic and log-linear regression), adjusting for potential confounders (socio-demographic factors, body mass index, lifestyle, diabetes, dyslipidemia, and antihypertensive treatment), was performed. Depressive patients, with and without antidepressant treatment, had better blood pressure control (OR: 1.28, CI 95%: 1.06-1.55, and OR: 1.30, CI 95%: 1.03-1.65, respectively) than non-depressive ones. Regarding blood pressure levels, systolic blood pressure values (mmHg) were found to be lower in both treated and untreated depressive patients (Log coefficient Beta: -1.59, 95% CI: -0.50 to -2.69 and Log coefficient Beta: -3.49, 95% CI: -2.10 to -4.87, respectively). Among hypertensive patients at high cardiovascular risk, the control of blood pressure was better in those diagnosed with depression.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A baseline metabolomic signature is associated with immunological CD4 + T-cell recovery after 36 months of antiretroviral therapy in HIV-infected patients

  • Rodríguez-Gallego, Esther|||0000-0002-6363-2510
  • Pacheco, Yolanda M.|||0000-0002-9451-8083
  • Peraire, Joaquim|||0000-0001-7808-5479
  • Viladés, Consuelo|||0000-0002-2991-9593
  • Beltrán-Debón, Raúl|||0000-0001-9691-1906
  • Mallol, Roger
  • López Dupla, Miguel
  • Veloso Esteban, Sergio|||0000-0001-7943-1169
  • Alba, Verónica|||0000-0002-5925-9573
  • Blanco, Julià|||0000-0002-2225-0217
  • Cañellas, Nicolau
  • Rull, Anna|||0000-0002-8907-7754
  • Leal, Manuel
  • Correig, Xavier|||0000-0002-6902-3054
  • Domingo Pedrol, Pedro|||0000-0003-1138-5770
  • Vidal, Francesc|||0000-0002-6692-6186
Poor immunological recovery in treated HIV-infected patients is associated with greater morbidity and mortality. To date, predictive biomarkers of this incomplete immune reconstitution have not been established. We aimed to identify a baseline metabolomic signature associated with a poor immunological recovery after antiretroviral therapy (ART) to envisage the underlying mechanistic pathways that influence the treatment response. This was a multicentre, prospective cohort study in ART-naive and a pre-ART low nadir (<200 cells/μl) HIV-infected patients (n = 64). We obtained clinical data and metabolomic profiles for each individual, in which low molecular weight metabolites, lipids and lipoproteins (including particle concentrations and sizes) were measured by NMR spectroscopy. Immunological recovery was defined as reaching CD4 + T-cell count at least 250 cells/μl after 36 months of virologically successful ART. We used univariate comparisons, Random Forest test and receiver-operating characteristic curves to identify and evaluate the predictive factors of immunological recovery after treatment. HIV-infected patients with a baseline metabolic pattern characterized by high levels of large high density lipoprotein (HDL) particles, HDL cholesterol and larger sizes of low density lipoprotein particles had a better immunological recovery after treatment. Conversely, patients with high ratios of non-HDL lipoprotein particles did not experience this full recovery. Medium very-low-density lipoprotein particles and glucose increased the classification power of the multivariate model despite not showing any significant differences between the two groups. In HIV-infected patients, a baseline healthier metabolomic profile is related to a better response to ART where the lipoprotein profile, mainly large HDL particles, may play a key role.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Metabolites related to purine catabolism and risk of type 2 diabetes incidence, modifying effects of the TCF7L2-rs7903146 polymorphism

  • Papandreou, Christopher|||0000-0002-6803-507X
  • Li, Jun
  • Liang, Liming|||0000-0001-8261-3174
  • Bulló, Mònica|||0000-0002-0218-7046
  • Zheng, Yan
  • Ruiz-Canela, Miguel|||0000-0002-7684-2787
  • Yu, Edward
  • Guasch-Ferré, Marta
  • Razquín, Cristina|||0000-0003-3480-2645
  • Clish, Clary|||0000-0001-8259-9245
  • Corella, Dolores|||0000-0002-2366-4104
  • Estruch, Ramón|||0000-0003-1260-4445
  • Ros, Emilio|||0000-0002-2573-1294
  • Fitó, Montserrat|||0000-0002-1817-483X
  • Arós, Fernando
  • Serra-Majem, Luís|||0000-0002-9658-9061
  • Rosique, Nuria
  • Martínez-González, Miguel A.
  • Hu, Frank B..
  • Salas-Salvadó, Jordi|||0000-0003-2700-7459
Studies examining associations between purine metabolites and type 2 diabetes (T2D) are limited. We prospectively examined associations between plasma levels of purine metabolites with T2D risk and the modifying effects of transcription factor-7-like-2 (TCF7L2) rs7903146 polymorphism on these associations. This is a case-cohort design study within the PREDIMED study, with 251 incident T2D cases and a random sample of 694 participants (641 non-cases and 53 overlapping cases) without T2D at baseline (median follow-up: 3.8 years). Metabolites were semi-quantitatively profiled with LC-MS/MS. Cox regression analysis revealed that high plasma allantoin levels, including allantoin-to-uric acid ratio and high xanthine-to-hypoxanthine ratio were inversely and positively associated with T2D risk, respectively, independently of classical risk factors. Elevated plasma xanthine and inosine levels were associated with a higher T2D risk in homozygous carriers of the TCF7L2-rs7903146 T-allele. The potential mechanisms linking the aforementioned purine metabolites and T2D risk must be also further investigated.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Vitamin D and risk of developing type 2 diabetes in the SUN project: a prospective cohort study

  • Valer-Martínez, Ana
  • Sayón-Orea, Carmen
  • Martínez, José Alfredo
  • Basterra Gortari, Francisco Javier
  • Martínez González, Miguel Ángel
  • Bes-Rastrollo, Maira
Purpose: Vitamin D deficiency has been associated with multiple chronic diseases, including metabolic disorders such as insulin resistance and type 2 diabetes (T2D). The aim of the study was to analyze the association between validated predicted serum vitamin D status and the risk of developing T2D in a large prospective cohort based on a Mediterranean population. Methods: The SUN project is a prospective and dynamic Spanish cohort that gathers university graduates who have answered lifestyle questionnaires, including a validated Food Frequency Questionnaire. The association between predicted serum vitamin D and the risk of T2D was assessed through Cox regression models according to quartiles (Q) of predicted vitamin D at baseline. The models were adjusted for potential confounders and sensitivity analyses were performed to ensure the robustness of our findings. Results: Our study included a total of 18,594 participants and after a total follow-up of 238,078 person-years (median follow-up of 13.5 years), 209 individuals were diagnosed with incident T2D. We found a significant inverse association between predicted levels of serum vitamin D and the risk of developing T2D, after adjusting for potential confounders and performing different sensitivity analyses (hazard ratio Q4 vs. Q1: 0.48, 95% CI 0.26¿0.88; p for trend = 0.032). Conclusion: The outcomes suggest that higher levels of vitamin D at baseline may be associated with a reduced risk of developing T2D., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. The SUN project has received funding from the Spanish Government-Instituto de Salud Carlos III, the European Regional Development Fund (FEDER) (RD 06/0045, CIBER-OBN, Grants PI10/02658, PI10/02293, PI13/00615, PI14/01668, PI14/01798, PI14/01764, PI17/01795, PI20/00564, PI23/01332, and G03/140), the Navarra Regional Government (27/2011, 45/2011, 122/2014), the National Plan on Drugs (2020/021), and the University of Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

A portable, low-cost eye tracking system for predicting visual attention during meal ingestion

  • Cia Alonso, Izaskun
  • Elizaran Mendarte, Amaia
  • Garde Lecumberri, Gonzalo
  • Cabeza Laguna, Rafael
  • Almiron-Roig, Eva
  • Villanueva Larre, Arantxa
Obesity is a pressing public health challenge affecting physical and mental health. Understanding the cognitive and socio-economic factors that influence eating behaviors is essential for effective interventions. Visual attention is crucial in food choices, making it critical to study how individuals engage with food in real-life settings. However, current methodologies often rely on static images, limiting their ecological validity and real-world applicability, or are highly intrusive. This work offers a practical solution for tracking visual attention during real-life eating scenarios. We designed a tray with an integrated camera and a calibration pattern to remotely record volunteers during meal consumption. A convolutional neural network (CNN) was employed for the gaze tracking, utilizing a custom-built training database. Models without and with user calibration were provided. Results indicate an accuracy error of 5 cm, which improves to 2 cm with calibration, demonstrating our system's effectiveness in measuring visual attention in food psychology experiments., This research was supported by the Government of Navarra, Departamento de Universidad, Innovacion y Transformacion Digital (grant PC139-140, PORTIONS-4) . EA-R also received funding from the Centre for Nutrition Research, University of Navarra, Spain. The portion-control plate was kindly provided by Precise Portions LLC, Virginia, USA.Additional funding was provided by the Public University of Navarra and the Spanish Ministry of Science and Innovation under the project Challenges of Eye Tracking Off-the-Shelf (ChETOS) (reference PID2020-118014RB-I00) .
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Pre-pregnancy provegetarian food pattern and the risk of developing gestational diabetes mellitus: the Seguimiento Universidad de Navarra (SUN) cohort study

  • Bullón-Vela, Vanessa
  • Martínez Tabar, Ainara
  • Etxezarreta-Uranga, Maddi
  • Martínez González, Miguel Ángel
  • Basterra Gortari, Francisco Javier
  • Bes-Rastrollo, Maira
Background and Objectives: Gestational diabetes mellitus (GDM) is one of the most common medical conditions in pregnancy, with adverse effects on maternal and neonatal outcomes. Evidence suggests a beneficial effect of plant-based dietary patterns, rich in foods derived from plant sources and low in animal foods, on type 2 diabetes; however, their effects on GDM remain unclear. We aimed to investigate the association between pre-pregnancy provegetarian food patterns and the incidence of GDM in a Spanish cohort. Materials and Methods: This subsample of the Seguimiento Universidad de Navarra (SUN) cohort analyzed 3589 Spanish university graduate pregnant women with a mean (standard deviation) age of 28 (±4.3) who were initially free of pre-existing diabetes at baseline. Dietary food consumption was evaluated through a validated, 136-item semi-quantitative food frequency questionnaire. The pre-pregnancy provegetarian food pattern was obtained by assigning positive scores to plant-based food groups and reverse scores to animal food groups. Energy-adjusted quintiles were applied to allocate points to construct the provegetarian food pattern, ranging from 12 to 60 points. Logistic regression models were performed to estimate the odds ratios (OR) of GDM across quintiles of a pre-pregnancy provegetarian food pattern, using the lowest quintile as the reference category. Results: We identified 178 incidence cases of GDM. Women in the highest quintile (Q5) of provegetarian food pattern before pregnancy exhibited a 42% relative reduction in the odds of GDM [adjusted OR (95% CI) Q5 vs. Q1: 0.58 (0.35, 0.97); p-trend = 0.109]. Higher consumption of meat and dairy before pregnancy was associated with a significantly increased risk of GDM [adjusted OR (95% CI) Q5 vs. Q1: 1.94 (1.19, 3.16); p-trend = 0.005] and [adjusted OR (95% CI) Q5 vs. Q1: 1.77 (1.07, 2.94); p-trend = 0.082], respectively. Conclusions: Higher pre-pregnancy consumption of a provegetarian food pattern was associated with a lower risk of developing GDM in Spanish women. Further studies are needed to confirm these findings., The SUN Project has received funding from the Spanish Government-Instituto de Salud Carlos III, the European Regional Development Fund (FEDER) (RD 06/0045, CIBEROBN, Grants PI10/02658, PI10/02293, PI13/00615, PI14/01668, PI14/01798, PI14/01764, PI17/01795, PI20/00564, PI21/01332 and G03/140), the Navarra Regional Government (27/2011, 45/2011, and 122/2014), the National Plan on Drugs (2020/021), and the University of Navarra.