Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Multi-regression analysis to enhance the predictability of the seismic response of buildings

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Ávila Haro, Jorge Arturo|||0000-0002-7437-8773
Several methodologies for assessing seismic risk extract information from the statistical relationship between the intensity of ground motions and the structural response. The first group is represented by intensity measures (IMs) whilst the latter by engineering demand parameters (EDPs). The higher the correlation between them, the lesser the uncertainty in estimating seismic damage in structures. In general, IMs are composed by either a single (scalar-based IMs) or a group of features of both the ground motion and the structure (vector-valued IMs); the latter category provides higher efficiency to explain EDPs when compared to the first one. This paper explores how to find new vector-valued IMs, which are highly correlated with EDPs, by means of multi-regression analysis. To do so, probabilistic nonlinear dynamic analyses have been performed by considering a seven-story reinforced concrete building as a testbed. At a first stage, 30 scalar-based IMs have been correlated with 4 EDPs (i.e., 120 groups of IM-EDP pairs have been studied). Afterwards, the structural responses have been classified as elastic, inelastic and a combination of both. It has been analyzed how efficiency behaves when making these classifications. Then, 435 vector-valued IMs have been created to enhance the predictability of the scalar EDPs (i.e., 1740 groups of IM-EDP pairs have been analyzed). Again, the most efficient IMs have been identified. Sufficiency, which is another statistical property desired in IMs, has also been examined. Results show that the efficiency and sufficiency to predict the structural response increase when considering vector-valued IMs. This sophistication has important consequences in terms of design or assessment of civil structures., This research has been partially funded by the European Regional Development Fund (ERDF) of the European Union (EU), through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU) and by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The support of these institutions is highly recognized and acknowledged. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

New insights into the relationship between seismic intensity measures and nonlinear structural response

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Hurtado Gómez, Jorge Eduardo
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
This paper focuses on the probabilistic analysis of Intensity Measures (IMs) and Engineering Demand Parameters (EDPs) in the context of earthquake-induced ground motions. Several statistical properties, which are desirable in IMs when they are used to predict EDPs, have been analysed. Specifically, efficiency, sufficiency and steadfastness have been quantified for a set of IMs with respect to two EDPs: the maximum inter-storey drift ratio, MIDR, and the maximum floor acceleration, MFA. Steadfastness is a new statistical property proposed in this article, which is related to the ability of IMs to forecast EDPs for large building suites. In other words, this means that efficiency does not significantly vary when different types of buildings are simultanously considered in the statistical analyses. This property allows reducing the number of calculations when performing seismic risk estimations at urban level since, for instance, a large variety of fragility curves, representing specific building typologies, can be grouped together within a more generic one. The main sources of uncertainty involved in the calculation of the seismic risk have been considered in the analysis. To do so, the nonlinear dynamic responses of probabilistic multi-degree-of-freedom building models, subjected to a large data set of ground motion records, have been calculated. These models have been generated to simulate the dynamic behavior of reinforced concrete buildings whose number of stories vary from 3 to 13. 18 spectrum-, energy- and direct-accelerogram-based IMs have been considered herein. Then, from clouds of IM-EDP points, efficiency, sufficiency and steadfastness have been quantified. For MIDR, results show that IMs based on spectral velocity are more efficient and steadfast than the ones based on spectral acceleration; spectral velocity averaged in a range of periods, AvSv, has shown to be the most efficient IM with an adequate level of steadfastness. For MFA, spectral acceleration-based-IMs are more efficient than velocity-based ones. A comparison is also presented on the use of linear vs quadratic regression models, and their implications on the derivation of fragility functions. Concerning sufficiency, most of the 18 IMs analysed do not have this property. Nonetheless, multi-regression models have been employed to address this lack of sufficiency allowing to obtain a so-called ‘ideal’ IM., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. H2020 Marie Skłodowska-Curie Actions, 799553, Yeudy Felipe Vargas-Alzate., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A drift-correlated ground motion intensity measure: application to steel frame buildings

  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Díaz Carrasco, Sergio
Estimations of seismic risk in urban areas should include quantifications of the expected damage to civil structures subjected to earthquakes. In buildings, this quantification depends on the maximum inter-story drift (MIDR), among other aspects. In this study, the correlation between several intensity measures (IMs) and the maximum inter-story drift of steel structures was investigated. Three steel frame buildings of 3, 7 and 13 stories were used as a testbed. These buildings were modelled as 2D framed structures. For the seismic hazard, forty strong ground motion pairs were selected (80 individual horizontal components) from the Italian database. These records were scaled to a specific peak ground acceleration (PGA) and matched to a design spectrum from Eurocode 8. Nonlinear dynamic analysis was used to estimate the seismic response of the structures. Thus, 720 nonlinear dynamic analyses (NLDA) were performed [3 structures × (80 as recorded accelerograms + 80 scaled records + 80 matched records)]. Preliminary results indicate that PGA and MIDR show the worst correlation. A higher correlation was observed for peak ground velocity, root-mean-square velocity and specific energy density intensity-based measures. Finally, a new IM, which is highly correlated with MIDR, is proposed. This IM is called IΔ-PGV and considers both the PGV and the significant duration., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Gender integration in seismic risk assessment: towards equitable resilience in Colombia

  • Zapata Franco, Ana Maria|||0000-0002-8377-9114
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
Research on women’s exposure to natural hazards has shown that gender inequalities increase their risk. It has been a topic of discussion for many years, but in-depth research on the subject has been scarce and, although researchers in the field recognise that there is an equity problem, few have been able to quantify the magnitude and trend of the problem. In developing countries, for example, people living below the poverty line are the most exposed to natural hazards; 70% of the world population living in this condition are women. Moreover, many of them are responsible for household chores and raising children, which requires them to stay indoor for large periods of time, increasing their risk of being harmed in catastrophic events. This is exacerbated by the fact that their houses are not generally built with the minimum requirements to withstand natural hazards. This article seeks to integrate a series of well-known methods into a probabilistic framework to assess the consequences of gender inequalities in seismic events in Colombia. Based on the outcomes of probabilistic surrogate models that consider the average response of single-degree-of-freedom systems, fragility functions have been derived through the use of cloud analysis for two structural typologies: Unreinforced Mid-Rise Masonry and Confined Masonry. The former can be considered a highly vulnerable system, while the latter has a higher performance against seismic actions. The objective has been to assess the influence of potential retrofitting measures on the expected risk. Finally, the Hazus 99 methodology has been adapted to estimate the number of people affected, disaggregated by gender. The projections show that, in the event of an earthquake in Colombia, women are more likely to be adversely affected than men. Protective measures aimed at increasing the resilience of the entire community have proven effective in mitigating the imbalance in seismic risk., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Seismic risk assessment using stochastic nonlinear models

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Lantada, Nieves|||0000-0002-9974-6915
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
The basic input when seismic risk is estimated in urban environments is the expected physical damage level of buildings. The vulnerability index and capacity spectrum-based methods are the tools that have been used most to estimate the probability of occurrence of this important variable. Although both methods provide adequate estimates, they involve simplifications that are no longer necessary, given the current capacity of computers. In this study, an advanced method is developed that avoids many of these simplifications. The method starts from current state-of-the-art approaches, but it incorporates non-linear dynamic analysis and a probabilistic focus. Thus, the method considers not only the nonlinear dynamic response of the structures, modeled as multi degree of freedom systems (MDoF), but also uncertainties related to the loads, the geometry of the buildings, the mechanical properties of the materials and the seismic action. Once the method has been developed, the buildings are subjected to earthquake records that are selected and scaled according to the seismic hazard of the site and considering the probabilistic nature of the seismic actions. The practical applications of the method are illustrated with a case study: framed reinforced concrete buildings that are typical of an important district, the Eixample, in Barcelona (Spain). The building typology and the district were chosen because the seismic risk in Barcelona has been thoroughly studied, so detailed information about buildings’ features, seismic hazard and expected risk is available. Hence, the current results can be compared with those obtained using simpler, less sophisticated methods. The main aspects of the method are presented and discussed first. Then, the case study is described and the results obtained with the capacity spectrum method are compared with the results using the approach presented here. The results at hand show reasonably good agreement with previous seismic damage and risk scenarios in Barcelona, but the new method provides richer, more detailed, more reliable information. This is particularly useful for seismic risk reduction, prevention and management, to move towards more resilient, sustainable cities., This research was funded by the research grant program Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This research was also partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Funds (ERDF) of the European Union (EU) through projects with references CGL2015-65913 -P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). The support of these institutions is highly recognized and acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A simplified approach for including the incidence angle effect in seismic risk assessment

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Silva, Vitor
  • Vamvatsikos, Dimitrios
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
A simplified procedure is developed to consider the azimuthal orientation of buildings when estimating seismic risk. Two square-plan reinforced concrete building models are considered as a testbed, one with similar and one with dissimilar properties along the two principal horizontal axes. The fragility of both structures is analysed using a set of ground motion records rotated to multiple incidence angles to develop orientation-dependent fragility functions. It has been observed that, re-orienting all records so that these structures have the same azimuth vis-à-vis the corresponding epicentre leads to significant differences compared to assuming random orientations. Additional results stemming from single-degree-of-freedom oscillators further confirm such findings, showing a dependence to the proximity to the faults and the level of dissimilarity in the principal horizontal axes of the structure. The end results point to a non-negligible bias in assessment studies when a structure's orientation with respect to governing rupture scenarios is not taken into account. It is shown that the median of fragility curves calculated for un-rotated incidence angles can be bias-corrected through shifted by an amount that depends on the azimuthal orientation and level of axes-dissimilarity of structures., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Efficiency of intensity measures considering near- and far-fault ground motion records

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Hurtado Gómez, Jorge Eduardo
This paper focuses on the identification of high-efficiency intensity measures to predict the seismic response of buildings affected by near- and far-fault ground motion records. Near-fault ground motion has received special attention, as it tends to increase the expected damage to civil structures compared to that from ruptures originating further afield. In order to verify this tendency, the nonlinear dynamic response of 3D multi-degree-of-freedom models is estimated by using a subset of records whose distance to the epicenter is lower than 10 km. In addition, to quantify how much the expected demand may increase because of the proximity to the fault, another subset of records, whose distance to the epicenter is in the range between 10 and 30 km, has been analyzed. Then, spectral and energy-based intensity measures as well as those obtained from specific computations of the ground motion record are calculated and correlated to several engineering demand parameters. From these analyses, fragility curves are derived and compared for both subsets of records. It has been observed that the subset of records nearer to the fault tends to produce fragility functions with higher probabilities of exceedance than the ones derived for far-fault records. Results also show that the efficiency of the intensity measures is similar for both subsets of records, but it varies depending on the engineering demand parameter to be predicted., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. Support for participating in this research has been received by the second author from the Universidad Nacional de Colombia. It is gratefully acknowledged., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. Support for participating in this research has been received by the second author from the Universidad Nacional de Colombia. It is gratefully acknowledged., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Seismic risk assessment using stochastic nonlinear models

  • Vargas Alzate, Yeudy Felipe
  • Lantada, Nieves
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
The basic input when seismic risk is estimated in urban environments is the expected physical damage level of buildings. The vulnerability index and capacity spectrum-based methods are the tools that have been used most to estimate the probability of occurrence of this important variable. Although both methods provide adequate estimates, they involve simplifications that are no longer necessary, given the current capacity of computers. In this study, an advanced method is developed that avoids many of these simplifications. The method starts from current state-of-the-art approaches, but it incorporates non-linear dynamic analysis and a probabilistic focus. Thus, the method considers not only the nonlinear dynamic response of the structures, modeled as multi degree of freedom systems (MDoF), but also uncertainties related to the loads, the geometry of the buildings, the mechanical properties of the materials and the seismic action. Once the method has been developed, the buildings are subjected to earthquake records that are selected and scaled according to the seismic hazard of the site and considering the probabilistic nature of the seismic actions. The practical applications of the method are illustrated with a case study: framed reinforced concrete buildings that are typical of an important district, the Eixample, in Barcelona (Spain). The building typology and the district were chosen because the seismic risk in Barcelona has been thoroughly studied, so detailed information about buildings’ features, seismic hazard and expected risk is available. Hence, the current results can be compared with those obtained using simpler, less sophisticated methods. The main aspects of the method are presented and discussed first. Then, the case study is described and the results obtained with the capacity spectrum method are compared with the results using the approach presented here. The results at hand show reasonably good agreement with previous seismic damage and risk scenarios in Barcelona, but the new method provides richer, more detailed, more reliable information. This is particularly useful for seismic risk reduction, prevention and management, to move towards more resilient, sustainable cities., This research was funded by the research grant program Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This research was also partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Funds (ERDF) of the European Union (EU) through projects with references CGL2015-65913 -P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). The support of these institutions is highly recognized and acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A simplified approach for including the incidence angle effect in seismic risk assessment

  • Vargas Alzate, Yeudy Felipe
  • Silva, Vitor
  • Vamvatsikos, Dimitrios
  • Pujades Beneit, Lluís
A simplified procedure is developed to consider the azimuthal orientation of buildings when estimating seismic risk. Two square-plan reinforced concrete building models are considered as a testbed, one with similar and one with dissimilar properties along the two principal horizontal axes. The fragility of both structures is analysed using a set of ground motion records rotated to multiple incidence angles to develop orientation-dependent fragility functions. It has been observed that, re-orienting all records so that these structures have the same azimuth vis-à-vis the corresponding epicentre leads to significant differences compared to assuming random orientations. Additional results stemming from single-degree-of-freedom oscillators further confirm such findings, showing a dependence to the proximity to the faults and the level of dissimilarity in the principal horizontal axes of the structure. The end results point to a non-negligible bias in assessment studies when a structure's orientation with respect to governing rupture scenarios is not taken into account. It is shown that the median of fragility curves calculated for un-rotated incidence angles can be bias-corrected through shifted by an amount that depends on the azimuthal orientation and level of axes-dissimilarity of structures., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A drift-correlated ground motion intensity measure: application to steel frame buildings

  • Pinzón Ureña, Luis
  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • Díaz Carrasco, Sergio
Estimations of seismic risk in urban areas should include quantifications of the expected damage to civil structures subjected to earthquakes. In buildings, this quantification depends on the maximum inter-story drift (MIDR), among other aspects. In this study, the correlation between several intensity measures (IMs) and the maximum inter-story drift of steel structures was investigated. Three steel frame buildings of 3, 7 and 13 stories were used as a testbed. These buildings were modelled as 2D framed structures. For the seismic hazard, forty strong ground motion pairs were selected (80 individual horizontal components) from the Italian database. These records were scaled to a specific peak ground acceleration (PGA) and matched to a design spectrum from Eurocode 8. Nonlinear dynamic analysis was used to estimate the seismic response of the structures. Thus, 720 nonlinear dynamic analyses (NLDA) were performed [3 structures × (80 as recorded accelerograms + 80 scaled records + 80 matched records)]. Preliminary results indicate that PGA and MIDR show the worst correlation. A higher correlation was observed for peak ground velocity, root-mean-square velocity and specific energy density intensity-based measures. Finally, a new IM, which is highly correlated with MIDR, is proposed. This IM is called IΔ-PGV and considers both the PGV and the significant duration., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Efficiency of intensity measures considering near- and far-fault ground motion records

  • Vargas Alzate, Yeudy Felipe
  • Hurtado Gómez, Jorge Eduardo
This paper focuses on the identification of high-efficiency intensity measures to predict the seismic response of buildings affected by near- and far-fault ground motion records. Near-fault ground motion has received special attention, as it tends to increase the expected damage to civil structures compared to that from ruptures originating further afield. In order to verify this tendency, the nonlinear dynamic response of 3D multi-degree-of-freedom models is estimated by using a subset of records whose distance to the epicenter is lower than 10 km. In addition, to quantify how much the expected demand may increase because of the proximity to the fault, another subset of records, whose distance to the epicenter is in the range between 10 and 30 km, has been analyzed. Then, spectral and energy-based intensity measures as well as those obtained from specific computations of the ground motion record are calculated and correlated to several engineering demand parameters. From these analyses, fragility curves are derived and compared for both subsets of records. It has been observed that the subset of records nearer to the fault tends to produce fragility functions with higher probabilities of exceedance than the ones derived for far-fault records. Results also show that the efficiency of the intensity measures is similar for both subsets of records, but it varies depending on the engineering demand parameter to be predicted., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. Support for participating in this research has been received by the second author from the Universidad Nacional de Colombia. It is gratefully acknowledged., Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution. Support for participating in this research has been received by the second author from the Universidad Nacional de Colombia. It is gratefully acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Multi-regression analysis to enhance the predictability of the seismic response of buildings

  • Vargas Alzate, Yeudy Felipe
  • González Drigo, José Ramón
  • Ávila Haro, Jorge Arturo
Several methodologies for assessing seismic risk extract information from the statistical relationship between the intensity of ground motions and the structural response. The first group is represented by intensity measures (IMs) whilst the latter by engineering demand parameters (EDPs). The higher the correlation between them, the lesser the uncertainty in estimating seismic damage in structures. In general, IMs are composed by either a single (scalar-based IMs) or a group of features of both the ground motion and the structure (vector-valued IMs); the latter category provides higher efficiency to explain EDPs when compared to the first one. This paper explores how to find new vector-valued IMs, which are highly correlated with EDPs, by means of multi-regression analysis. To do so, probabilistic nonlinear dynamic analyses have been performed by considering a seven-story reinforced concrete building as a testbed. At a first stage, 30 scalar-based IMs have been correlated with 4 EDPs (i.e., 120 groups of IM-EDP pairs have been studied). Afterwards, the structural responses have been classified as elastic, inelastic and a combination of both. It has been analyzed how efficiency behaves when making these classifications. Then, 435 vector-valued IMs have been created to enhance the predictability of the scalar EDPs (i.e., 1740 groups of IM-EDP pairs have been analyzed). Again, the most efficient IMs have been identified. Sufficiency, which is another statistical property desired in IMs, has also been examined. Results show that the efficiency and sufficiency to predict the structural response increase when considering vector-valued IMs. This sophistication has important consequences in terms of design or assessment of civil structures., This research has been partially funded by the European Regional Development Fund (ERDF) of the European Union (EU), through project with reference EFA158/16/POCRISC (INTERREG/POCTEFA. EU) and by the Spanish Research Agency (AEI) of the Spanish Ministry of Science and Innovation (MICIN) through project with reference: PID2020-117374RB-I00/AEI/10.13039/501100011033. The support of these institutions is highly recognized and acknowledged. Yeudy F. Vargas-Alzate has been granted an Individual Fellowship (IF) in the research grant program of the Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This author is deeply grateful to this institution., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Gender integration in seismic risk assessment: towards equitable resilience in Colombia

  • Zapata Franco, Ana Maria
  • Vargas Alzate, Yeudy Felipe
Research on women’s exposure to natural hazards has shown that gender inequalities increase their risk. It has been a topic of discussion for many years, but in-depth research on the subject has been scarce and, although researchers in the field recognise that there is an equity problem, few have been able to quantify the magnitude and trend of the problem. In developing countries, for example, people living below the poverty line are the most exposed to natural hazards; 70% of the world population living in this condition are women. Moreover, many of them are responsible for household chores and raising children, which requires them to stay indoor for large periods of time, increasing their risk of being harmed in catastrophic events. This is exacerbated by the fact that their houses are not generally built with the minimum requirements to withstand natural hazards. This article seeks to integrate a series of well-known methods into a probabilistic framework to assess the consequences of gender inequalities in seismic events in Colombia. Based on the outcomes of probabilistic surrogate models that consider the average response of single-degree-of-freedom systems, fragility functions have been derived through the use of cloud analysis for two structural typologies: Unreinforced Mid-Rise Masonry and Confined Masonry. The former can be considered a highly vulnerable system, while the latter has a higher performance against seismic actions. The objective has been to assess the influence of potential retrofitting measures on the expected risk. Finally, the Hazus 99 methodology has been adapted to estimate the number of people affected, disaggregated by gender. The projections show that, in the event of an earthquake in Colombia, women are more likely to be adversely affected than men. Protective measures aimed at increasing the resilience of the entire community have proven effective in mitigating the imbalance in seismic risk., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

New insights into the relationship between seismic intensity measures and nonlinear structural response

  • Vargas Alzate, Yeudy Felipe
  • Hurtado Gómez, Jorge Eduardo
  • Pujades Beneit, Lluís
This paper focuses on the probabilistic analysis of Intensity Measures (IMs) and Engineering Demand Parameters (EDPs) in the context of earthquake-induced ground motions. Several statistical properties, which are desirable in IMs when they are used to predict EDPs, have been analysed. Specifically, efficiency, sufficiency and steadfastness have been quantified for a set of IMs with respect to two EDPs: the maximum inter-storey drift ratio, MIDR, and the maximum floor acceleration, MFA. Steadfastness is a new statistical property proposed in this article, which is related to the ability of IMs to forecast EDPs for large building suites. In other words, this means that efficiency does not significantly vary when different types of buildings are simultanously considered in the statistical analyses. This property allows reducing the number of calculations when performing seismic risk estimations at urban level since, for instance, a large variety of fragility curves, representing specific building typologies, can be grouped together within a more generic one. The main sources of uncertainty involved in the calculation of the seismic risk have been considered in the analysis. To do so, the nonlinear dynamic responses of probabilistic multi-degree-of-freedom building models, subjected to a large data set of ground motion records, have been calculated. These models have been generated to simulate the dynamic behavior of reinforced concrete buildings whose number of stories vary from 3 to 13. 18 spectrum-, energy- and direct-accelerogram-based IMs have been considered herein. Then, from clouds of IM-EDP points, efficiency, sufficiency and steadfastness have been quantified. For MIDR, results show that IMs based on spectral velocity are more efficient and steadfast than the ones based on spectral acceleration; spectral velocity averaged in a range of periods, AvSv, has shown to be the most efficient IM with an adequate level of steadfastness. For MFA, spectral acceleration-based-IMs are more efficient than velocity-based ones. A comparison is also presented on the use of linear vs quadratic regression models, and their implications on the derivation of fragility functions. Concerning sufficiency, most of the 18 IMs analysed do not have this property. Nonetheless, multi-regression models have been employed to address this lack of sufficiency allowing to obtain a so-called ‘ideal’ IM., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. H2020 Marie Skłodowska-Curie Actions, 799553, Yeudy Felipe Vargas-Alzate., Peer Reviewed, Postprint (published version)