Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental comparison of DSB and CS-DSB mmW formats over a hybrid fiber and FSO fronthaul network for 5G

  • Bohata, J.
  • Nguyen, D.N.
  • Spacil, J.
  • Komanec, M.
  • Vallejo-Castro, Luis
  • Ghassemlooy, Z.
  • Zvanovec, S.
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] The telecommunication world is experiencing the 5th generation (5G) networks deployment including the use of millimeter wave (mmW) frequency bands to satisfy capacity demands. This leads to the extensive use of optical communications, especially the optical fiber connectivity at the last mile access and the edge networks. In this paper we outline fiber and free space optics (FSO) technologies for use as part of the 5G optical fronthaul network. We investigate two different mmW transmission schemes based on (i) the conventional analog radio over fiber transmission using one Mach-Zehnder modulator (MZM) with double sideband (DSB) optical modulation, and (ii) an optical-based frequency doubling with one MZM biased at the null point to introduce carrier suppression DSB (CS DSB) transmission and second MZM used for data modulation. Both systems are assessed in terms of the error vector magnitude, signal-to-noise ratio, dynamic range and phase noise. We consider a configuration for the fronthaul network in the frequency range 2 (FR2) at 27 and 39 GHz with the scale of bandwidth up to 400 MHz with M-quadrature amplitude modulation and quadrature phase shift keying. Results are also shown for FR1 at 3.5 GHz. Moreover, we investigate for the first time the 5G new radio signal transmission under strong turbulence conditions and show the turbulence-induced FSO link impairment. We finally demonstrate the CS DSB scheme performs well under chromatic dispersion-induced fading for the frequency up to 40 GHz and single mode fiber length of 30 km, whereas the DSB format seems more appropriate for an antenna seamless transmission., European Cooperation in Science and Technology (CA19111); Ministerstvo Prumyslu a Obchodu (FV40089); Ceske Vysoke Uceni Technicke v Praze (SGS20/166/OHK3/3T/13).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficiency Analysis of a Truncated Flip-FBMC in Burst Optical Transmission

  • Bahaaelden, Mohammed S.
  • Pérez-Jiménez, Rafael
  • Renfors, Markku
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] A novel Flip-filter bank multicarrier (Flip-FBMC)-based transmultiplexer (TMUX) with offset quadrature amplitude modulation is proposed to enhance the transmission performance compared to a conventional Flip-OFDM system. Moreover, the possibility to reduce the TMUX response (latency) and increase spectral efficiency is investigated for the first time through a tail shortening method. The proposed design is based on a biorthogonal form for visible light communication (VLC) to increase the flexibility of design requirements. However, spectral efficiency suffers from the ramp-up and the ramp-down at the beginning and end, respectively, of a data burst. Hence, as a penalty, Flip-FBMC imposes 9 more symbols than a Flip-OFDM packet and two factors compared to a DCO-FBMC burst. Hard truncation of the lowest energy tail minimizes latency and limits the system penalty to 2.5 symbols, which is lower than that of DCO-FBCM by 2 symbols. The results show that the prototype filter of the Heisenberg factor ( ¿1 ) is highly effective in reducing the energy loss of truncated tails and reduces the symbol error rate (SER). The Flip-FBMC gain over a direct line-of-sight VLC channel is analyzed, and the channel estimation of a truncated burst, which is based on the interference approximation method (IAM) of IAM-C type, exhibits a superior performance of 1.5 dB at 10 ¿3 SER over the IAM-R method and 1 dB at 10 ¿5 SNR over a cyclic prefix of 1 point Flip-OFDM. On the other hand, the analysis reveals that IAM-C is slightly impacted by the truncated burst compared to the nontruncated version., This work was supported in part by the Research Agency under Project RTI2018-101658-B-I00 and Project TEC2017-84065-C3-1-R, in part by the European Cooperation in Science and Technology COST Action "European Network on Future Generation Optical Wireless Communication Technologies (NEWFOCUS)'' under Grant CA19111, and in part by Generalitat Valenciana under Grant PROMETEO 2017/103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Demonstration of M-QAM OFDM bidirectional 60/25 GHz transmission over 10 km Fiber, 100 m FSO and 2 m radio seamless heterogeneous fronthaul link

  • Vallejo, Luis
  • Nguyen, D.-N.
  • Guerra, C.
  • Bohata, J.
  • Spacil, J.
  • Zvanovec, S.
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Mora Almerich, José|||0000-0002-2877-4118
[EN] In this paper, we demonstrate the experimental transmission of 16-and 64-quadrature amplitude modulation (QAM) Long Term Evolution -Orthogonal Frequency Division Multiplexing (LTE-OFDM) signals by using mil-limetre wave frequencies at 60 GHz and 25 GHz for downlink and uplink, respectively, over a heterogeneous optical fronthaul infrastructure. A directly modulated laser was employed for both links, which enables the cost-effective full-duplex system proposal. The bidirectional link consists of a 10 km of single mode fiber, a 100 m long free space optics channel and 2 m long wireless radio link, which brings flexibility for future wireless networks. The error vector magnitude (EVM) parameter is measured for a range of the received optical and electrical power as well as the signal-to-noise ratio. A comprehensive estimation of penalty factors in the different network segments is presented. The successful transmission over the whole proposed network with the EVM below the required limit of 9 % for 64-QAM with 20 MHz bandwidth is experimentally demonstrated for the received optical power of-2.7 dBm and-1 dBm for the downlink and uplink, respectively., The research has been supported by the CTU in Prague SGS20/166/OHK3/3T/13, project from Ministry of Industry and Trade in Czech Republic (FV40089) and within COST action CA19111 (NEWFOCUS) . It has also been funded by the regional project from Generalitat Valenciana PROMETEO 2021/015 and Grant RTI2018-101658-B-I00 FOCAL by MCIN/AEI/10.13039/501100011033 and ERDF "A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Scalable 26 GHz RoF Relay System Using Optoelectronic Extender

  • Bohata, Jan
  • Nguyen, Dong-Nhat
  • Dat, Pham Tien
  • Ghassemlooy, Zabih
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This letter presents data transmission over a 26 GHz millimeter-wave (mmW) radio signal and its coverage extension in an indoor environment using the radio-over-fiber (RoF) technology. The proposed system consists of two RoF seamless wireless links to emulate a mobile fronthaul using a transparent RoF relay link to overcome higher attenuation of the mmW signal. The system is experimentally evaluated for up to 64-quadrature amplitude modulation (QAM), showing the possibility of signal transmission over up to 20 km of optical fiber in the first Section transmission scheme without the usage of an optical amplifier. For the system with 20 km and 30 m long RoF links as well as 4 m and 1 m long relays with no optical amplification, the minimal experimentally measured error vector magnitude is as low as 5% for 64-QAM. Further, a self-developed integrable optoelectronic extender is used for the relay RoF system to simplify the antenna site and keep its footprint small. Moreover, the proposed setup is extended using an optical amplifier toward a scalable scheme with up to 75 km of optical fiber and 5 m long free space optical link., This work was supported in part by the Czech Science Foundation under Grant GA22-32180S and in part by the European Cooperation in Science andTechnology (COST) Project under Grant CA19111 NEWFOCUS.(Jan Bohataand Dong-Nhat Nguyen contributed equally to this work.)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the 40 GHz Remote Versus Local Photonic Generation for DML-Based C-RAN Optical Fronthaul

  • Vallejo-Castro, Luis
  • Nguyen, Dong-Nhat
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Mora Almerich, José|||0000-0002-2877-4118
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] Local and remote photonic millimeter wave (mmW) signal generation schemes are theoretically and experimentally evaluated in order to compare both approaches for practical deployment in a cloud radio access network (C-RAN) fronthaul network. The paper presents a full comprehensive formulation of the frequency response of a system based on a directly modulated laser transmitting data over 40 GHz signal which is generated by external carrier suppressed modulation and optical frequency multiplication. Theoretical and experimental characterization of the system response at baseband and mmW band for local and remote generation setups show very good agreement. The remote configuration leads to a higher electrical output power (i.e., 15 dB higher in 25 km fiber links) than the local generation setup in the mmW band due to the combined effect of chirp and fiber dispersion, although intermodulation distortion is higher in the former case. Transmission experiments using quadrature phase-shift keying (QPSK) signals with 250 MHz bandwidth centered at 0.5 GHz over 10 and 25 km fiber links also confirm the superior performance of the remote setup, whereas the local setup leads to similar results to optical back-to-back (OB2B) measurements, which is also validated with data signals centered at different frequencies within the laser bandwidth frequency range. Finally, experimental results show the quality of the recovered signals in terms of error vector magnitude (EVM) as a function of the received electrical power and demonstrate that no further penalties are introduced by photonic mmW signal generation with respect to electrical back-to-back (EB2B) levels., This work was supported in part by Generalitat Valenciana through PROMETEO2017/103, in part by Ministerio de Ciencia, Innovacion y Universidades through FOCAL RTI2018-101658-B-I00, in part by MEYES under Grant LTC18008, in part by the Ministry of Industry and Trade in Czech Republic under Grant FV40089, and in part by European Cooperation in Science and Technology under Grants CA16220 and CA19111.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Asymmetric hybrid full-duplex POF-based VLC transmission links

  • Apolo-Gonzaga, Juan Andres
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Teli, Shivani Rajendra
  • Guerra-Yánez, Carlos
  • Zvánovec, Stanislav
[EN] This paper presents an asymmetric full-duplex solution based on visible light communications (VLC) for indoor wired and wireless hybrid signal transmission. The signal is distributed by a polymer optical fiber (POF) link and passively radiated. The proposed system includes two VLC links: a low-speed downlink and a high-speed uplink using an image sensor (IS) and photodiode detection (PD) based receivers. PD-based system communication performance is evaluated by means of error vector magnitude (EVM) for different modulation orders quadrature phase shift keying (QPSK), 16- and 64-quadrature amplitude modulation (QAM), while the IS-based system is characterized in terms of the success of reception (SoR). High-speed data transmission up to 160 Mbps with a 16-QAM modulation scheme and low-speed data transmission up to 500 bps with 98.6% of SoR using a non-return zero on¿off keying (NRZ-OOK) scheme over a 1.5 m optical wireless link are demonstrated. Finally, simulations of the wireless channel are performed to evaluate the misalignment tolerance of the system; and, to estimate the uplink performance at longer distances., This work was based upon work from COST Action CA19111 (European Network on Future Generation Optical Wireless Communication Technologies, NEWFOCUS), supported by COST (European Cooperation in Science and Technology), and also supported by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe under Grant RTI2018-101658- B-I00 FOCAL, and also supported by the Czech Technical University in Prague under the CTU Global Postdoc Fellowship Program and TACR project FW01010571.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optical CS-DSB Schemes for 5G mmW Fronthaul Seamless Transmission

  • Bohata, Jan
  • Vallejo-Castro, Luis
  • Zvanovec, Stanislav
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] This paper describes the experimental demonstration of the hybrid optical/millimeter wave signal generation and transmission over combined optical fiber and free space optics fronthaul network with a seamless antenna link. An electrical bandpass filter is used to filter out the spectrum after photodetection in order to realize the seamless antenna transmission. The successful transmission of 64/256-quadrature amplitude modulation (QAM) 5G signal with up to 200 MHz bandwidth is presented by using two different setups: one is based on two Mach-Zehnder modulators (MZM) and the other employs a directly modulated laser (DML) to provide more cost efficient fronthaul solution. The DML based approach reveals mildly better performance in comparison to the MZMs in terms of higher achieved signal-to-noise ratio and lower error vector magnitude (EVM). More specifically, the best signal-to-noise ratio and EVM achieved with the DML based setup has been 31.5 dB and 3. 3%, respectively, compared to 30.3 dB and 3.8% with the MZMs based setup while transmitting 256-QAM signal with 100 MHz bandwidth. However, both setups kept the EVM well below the given 9% and 4.5% limit for 64- and 256-QAM, respectively., This work was supported in part by the Ministry of Industry and Trade in Czech Republic under Grant FV40089, in part by EU COST Action NEWFOCUS under Grant CA19111, and in part by the Ministerio de Ciencia, Innovacion y Universidades under Grant FOCAL RTI2018-101658-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental demonstrations of high-accuracy 3D/2D indoor visible light positioning using imaging multiple-input multiple-output receivers and artificial neural networks

  • Apolo-Gonzaga, Juan Andrés
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Osahon, Isaac. N. O.
  • Tang, Jianming
  • Rajbhandari, Sujan
[EN] This paper proposes and presents the first experimental demonstration of a high-precision indoor 2D and 3D visible light positioning (VLP) system using an imaging multiple-input multiple-output (MIMO) configuration with supervised artificial neural network. The proposed system utilises four distributed transmitters and receiver with four photodiodes and an imaging optics. The experiments are conducted in a typical indoor environment with transmitter separations of 300 mm and a link distance of 1400 mm. The experimental results show 2D and 3D positioning accuracies of 3.7 and 51 mm, respectively. A simulation model is also developed for the VLP system to validate the experimental results. Further optimisation of the VLP system in the simulation platform leads to improved 2D and 3D positioning accuracies of 2 and 14.7 mm, respectively. The proposed system can be seamlessly integrated with existing lighting infrastructures and is also compatible with the MIMO visible light communication system, indicating the potential for practical implementation in integrated communications and positioning applications., This work has been supported by COST action CA19111 (NEWFOCUS). It has also been funded by Grant PID2021-126514OB-I00 optimise by MCIN/AEI/10.13039/501100011033 and ERDF 'A way of making Europe'. SR and JT acknowledge support by the UK Engineering and Physical Sciences Research Council under Grant EP/Y037243/1 (TITAN Extension).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Full-duplex transmission of multi-Gb/s subcarrier multiplexing and 5G NR signals in 39 GHz band over fiber and space

  • Nguyen, Dong-Nhat
  • Vallejo-Castro, Luis
  • Dat, Pham Tien
  • Le, Son Thai
  • Bohata, Jan
  • Zvanovec, Stanislav
  • Almenar Terre, Vicenç|||0000-0002-8742-2315
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] We propose a stable full-duplex transmission of millimeter-wave signals over a hybrid single-mode fiber (SMF) and free-space optics (FSO) link for the fifth-generation (5G) radio access networks to accelerate the Industry 4.0 transformation. For the downlink (DL), we transmit 39 GHz subcarrier multiplexing (SCM) signals using variable quadrature amplitude modulation (QAM) allocations for multi-user services. As a proof of operation, we experimentally demonstrate the transmission of 3 Gb/s SCM signals (1 Gb/s per user) over a hybrid system consisting of a 10 km SMF and 1.2 m FSO link. For the uplink (UL), satisfactory performance for the transmission of 2.4 Gb/s 5G new radio (NR) signal at 37 GHz over the hybrid system is experimentally confirmed for the first time, to the best of our knowledge. The measured error vector magnitudes for both DL and UL signals using 4/16/64-QAM formats are well below the third generation partnership project (3GPP) requirements. We also further evaluate by simulation the full-duplex transmission over the system in terms of received optical and RF powers and bit error rate performance. A wireless radio distance of approximately 200 m, which is sufficient for 5G small-cell networks, is estimated for both DL and UL direction under the heavy rain condition, based on the available data from Spain. Furthermore, simulation for the DL direction is conducted to verify the superior performance of the system using variable QAM allocation over uniform QAM allocation. Using a variable modulation allocation, up to five users (2 Gb/s per user) can be transmitted over a hybrid 10 km SMF and 150 m FSO link., Ceske Vysoke Uceni Technicke v Praze (SGS20/166/OHK3/3T/13); European Cooperation in Science and Technology (CA19111 NEWFOCUS).
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Combined infrared-ultrasonic positioning system to improve the data availability

  • Aparicio Esteve, Elena|||0000-0001-7886-312X
  • Ureña Ureña, Jesús|||0000-0003-1408-6039
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
This work was supported in part by MCIN/AEI/10.13039/501100011033 and EU “NextGenerationEU”/PRTR (ref. TED2021-131773B-I00) Proyectos, Many indoor positioning applications related to accurate monitoring and tracking targets require centimeter precision. Infrared (IR)- and ultrasound (US)-based systems represent a feasible approach providing high robustness against interference. Furthermore, their combination may achieve better performance by mitigating their complementary drawbacks, covering larger areas, and improving the availability of positioning measurements. In this context, this work presents the proposal and experimental evaluation of a tightly coupled fusion method that uses an extended Kalman filter (EKF) to merge an IR- and a US-based positioning system. An outlier detection method is considered to select measurements with an adequate performance. Experimental results reveal that the IR and US systems are unable to position in 4.08% and 26.06% of locations, whereas the combined IR -US system has 100% of availability. In addition, the merged solution achieves less than 4 cm of positioning error in 90% of cases, outperforming the IR and US systems when they work independently., Agencia Estatal de Investigación, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Activity monitoring and location sensory system for people with mild cognitive impairments

  • García Requejo, Alejandro|||0000-0002-4955-8852
  • Pérez Rubio, María del Carmen|||0000-0001-8271-6843
  • Villadangos Carrizo, José Manuel|||0000-0001-5900-0978
  • Hernández Alonso, Álvaro|||0000-0001-9308-8133
Cognitive impairment diseases are becoming more and more prevalent mainly due to population ageing and the increase in life expectancy. Sensory and monitoring systems may allow people with mild cognitive impairments (MCI) or at early stages of dementia to live at home for longer with more independence and security. This work presents a Wireless Sensor Network (WSN) based on wearables that obtains indoor and outdoor location and step information, reporting them over a LoRaWAN network. Each Wireless Wearable Sensor (WWS) uses a Global Navigation Satellite System module for outdoor positioning, a proposed indoor roomlevel localization system based on infrared sensors, an accelerometer for a step detector algorithm, and a LoRa (Long-Range) radio link to send the measured information with low power consumption achieving a large coverage range. These sensory data are recorded in a database and presented to the medical services and caregivers through a user web application. This can be used to detect anomalous changes in daily patients? routines, as well as to know the user?s position in cases where the patient may be disoriented. In addition, alerts are launched in caregivers? smartphones to report about any risky situation, such as the patient leaving an allowed area or staying in one place for too long. Therefore, the proposed sensory system may support and extend the ability of people with MCI or at early stages of dementia to live independently, it helps detect behavioural changes and it keeps caregivers? peace of mind., European Commission, Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Slotted Aloha With Capture for OWC-Based IoT: Finite Block-Length Performance Analysis

  • Devaja, Tijana
  • Petkovic, Milica
  • Escribano Aparicio, Francisco Javier|||0000-0002-7648-2734
  • Stefanovic, Cedomir
  • Vukobratovic, Dejan
In this paper, we analyze the throughput and reliability of an indoor optical wireless communication (OWC)-based Internet of Things (IoT) system based on Slotted ALOHA (SA) where IoT devices exchange data with an access point (AP). Assuming that the OWC receiver at the AP exploits the capture effect, we derive the error probability of decoding a short-length data packet that originates from randomly selected OWC IoT device in the presence of interfering users. The analysis is based on the derivation of the signal-to-interference-plus-noise-ratio (SINR) statistics and the application of the finite block-length (FBL) information theory. Using these analytical results, we derive relevant performance parameters such as the system throughput and reliability expressed in terms of the outage probability of a user transmission. The main trade-offs between the system performance and the OWC system setup parameters are investigated, in particular, by stressing how the indoor OWC-based system geometry plays an important role in the system performance.Using extensive numerical results, we clearly describe how the presented results are used to optimize the SA-based indoor OWC IoT system design., European Union, European Cooperation in Science and Technology