Pasar al contenido principal

DESARROLLO Y APLICACION DE HERRAMIENTAS AVANZADAS PARA LA EVALUACION, PREVENCION Y GESTION DEL RIESGO SISMICO

CGL2015-65913-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An efficient methodology to estimate probabilistic seismic damage curves

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Hurtado Gómez, Jorge Eduardo
The incremental dynamic analysis (IDA) is a powerful methodology that can be easily extended for calculating probabilistic seismic damage curves. These curves are metadata to assess the seismic risk of structures. Although this methodology requires a relevant computational effort, it should be the reference to correctly estimate the seismic risk of structures. Nevertheless, it would be of high practical interest to have a simpler methodology, based for instance on the pushover analysis (PA), to obtain similar results to those based on IDA. In this article, PA is used to obtain probabilistic seismic damage curves from the stiffness degradation and the energy of the nonlinear part of the capacity curve. A fully probabilistic methodology is tackled by means of Monte Carlo simulations with the purpose of establishing that the results based on the simplified proposed approach are compatible with those obtained with the IDA. Comparisons between the results of both approaches are included for a low- to midrise reinforced concrete building. The proposed methodology significantly reduces the computational effort when calculating probabilistic seismic damage curves., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dynamic monitoring of a mid-rise building by real-aperture radar interferometer: advantages and limitations

  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Luzi, Guido
  • Caselles Magallón, Josep Oriol|||0000-0002-8280-0882
  • Pinzón Ureña, Luis|||0000-0003-3128-7158
In this paper, remote and in situ techniques to estimate the dynamic response of a building to ambient vibration are reported: data acquired through a real-aperture radar (RAR) interferometer and conventional accelerometers are analyzed. A five-story reinforced concrete housing building, which was damaged during the May 11th 2011 Lorca (Spain) earthquake, is used as a case study. The building was monitored using both types of instruments. The dynamic properties of the building are estimated first taking acceleration measurements using a set of 10 high-precision accelerometers installed on the roof of the building. Further, the displacement–time histories, recorded with the RAR device pointing to a corner of the building, are analyzed. Then, the ability and shortcomings of RAR measurements to deal with the fundamental frequencies of vibration of the structure are investigated. The advantages and limitations of from-inside (accelerometric) and from-outside (RAR) measurements are highlighted and discussed. A relevant conclusion is that, after strong earthquakes, RAR may be an interesting and useful tool, as it allows surveying the structural response of mid-rise buildings remotely, without the need to enter the structures, which may be dangerous for inspectors or technicians in cases of severely damaged buildings. Given that the instrumented building suffered significant damage, the ability of these kinds of measurements to detect damage is also discussed., This research has been partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects with references CGL2015-65913-P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). R.E.A. holds a PhD fellowship from the Consejo Nacional de Ciencia y Tecnología (CONACyT) in México. L.A.P. is supported by a Ph.D. scholarship grant from the Institute for the Training and Development of Human Resources (IFARHU) and the Government of Panama’s National Secretariat of Science, Technology, and Innovation (SENACYT)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Energy damage index based on capacity and response spectra

  • Díaz Alvarado, Sergio Alberto
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Hidalgo Leiva, D.A.
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: (1) the strain energy associated with the stiffness variation and the ductility of the structure, and (2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The first author holds PhD fellowships from the Universidad Juarez Autonoma de Tabasco (UJAT) and from the ‘Programa de Mejoramiento del Profesorado, Mexico (PROMEP)’., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Seismic site classification from the horizontal-to-vertical response spectral ratios: use of the Spanish strong-motion database

  • Pinzón, Luis A.
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Macau, Albert
  • Carreño, Emilio
  • Alcalde Camino, Juan Manuel
Normally, the average of the horizontal-to-vertical (H/V) ratios of the 5% damped response spectra of ground motions is used to classify the site of strong-motion stations. In these cases, only the three-orthogonal as-recorded acceleration components are used in the analysis, and all the vector compositions that can generate a different response for each period oscillator are excluded. In this study, the Spanish strong-motion database was used to classify the sites of accelerometric stations based on the predominant periods through the average horizontal-to-vertical spectral ratios (HVSR) of recorded ground motions. Moreover, the directionality effects using the vector composition of the horizontal components of ground motions were also considered in the estimations of H/V ratios. This consideration is a relevant novelty compared to the traditional H/V ratios methods. Only earthquakes with magnitudes above 3.5 and hypocentral distances below 200 km were selected, which resulted in 692 ground-motion records, corresponding to 86 stations, from events in the period between 1993 and 2017. After the analysis, a predominant-period site classification was assigned to each station. On the whole, the obtained mean and standard deviation values of the spectral ratios are comparable to those shown by other researchers. Therefore, the advantages of the proposed procedure, which takes the directionality effects into account, can be summarized as follows: (a) The obtained information is richer and gives enables more sophisticated and realistic analyses on the basis of percentiles and (b) it is easier to detect anomalous stations, sites, and/or accelerograms. Moreover, the method eliminates the effect of directionality as a contributor to epistemic uncertainty., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Do directionality effects influence expected damage? A case study of the 2017 central Mexico earthquake

  • Pinzón, Luis A.
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Díaz, Sergio Alberto
  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
We analyze the case of a building that collapsed in a multifamily complex of Tlalpan borough in Mexico City during the 19 September 2017 Central Mexico earthquake. Despite having similar materials and similar structural and geometric properties, this was the only building that collapsed in the complex. A structural analysis of the building and a study of the soils’ predominant periods indicated that resonance effects, if any, would not be significant. However, phenomena related to the anomalous performance of buildings in dense urban areas such as geological soil, soil–structure interaction, and soil–city interaction effects were also investigated. A detailed analysis of the directionality of seismic actions recorded at nearby accelerometric stations and of the azimuths of sound and damaged buildings indicates that directionality effects were responsible for the collapse of the building. Subsequently, a set of 58, two-component acceleration records of the earthquake was used to perform a thorough directionality analysis. The results were then compared with the foreseen uniform hazard response spectra and the design spectra in the city. Seismic actions in the city due to this earthquake were stronger than those corresponding to the uniform hazard response spectra. In addition, although design spectra have been significantly improved in the new 2017 Mexican seismic regulations, they were exceeded in 11 of 58 analyzed spectra. In 4 of these 11 cases, the design spectra were exceeded due to directionality effects. These results confirm the necessity of considering directionality effects in damage assessments, strong-motion prediction equations, and design regulations., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Integrated GPR and laser vibration surveys to preserve prehistorical painted caves: Cueva Pintada case study

  • Caselles Magallón, Josep Oriol|||0000-0002-8280-0882
  • Clapés Boixader, Jaime|||0000-0001-5070-8662
  • Sáenz Sagasti, José Ignacio
  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
  • Rodríguez Santana, Carmen Gloria
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2019, available online at: http://www.tandfonline.com/10.1080/15583058.2019.1643947, The study of structural safety when it is covered by important paintings requires a careful analysis without affecting the paintings. Therefore, non-destructive surveys are the only feasible method to obtain data about its state. In Cueva Pintada case, the problem requires a detailed but noninvasive analysis because this cave was dug in volcanic tuff. The tuff presents poor consolidation. This geological material is very sensitive to vibration. Furthermore, the proximity to the city downtown increases vibrations due to traffic. Recently, a small rockfall produces damage and alerted of the cave state of conservation. The painting walls constraint many of the NDT surveys. Two methodologies have been applied: ground-penetrating radar (GPR) and passive seismic. GPR analysis allowed determining the inner structure of the tuff cave, and results were used to determine the zones that required a wider and dense vibration study. Radar images show important anomalies at depths of about 0.2 m to 0.8 m and from 1.5 m to the top of the roof, almost horizontal. Amplification factor measured by passive seismic survey ranges from 0.03 to 93, with near half of the ceil with amplifications higher than 5 and about 10% with amplifications over 50 times., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through the project referenced as CGL2015-65913-P (MINECO/ FEDER, UE)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Directionality models from ground motions of Italy

  • Pinzón, Luis A.
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Hidalgo Leiva, D.A.
  • Díaz, Sergio Alberto
Directionality effects on the expected strong ground motion in Italy are investigated. After a brief description of the directionality effect and the intensity measures involved, a wide Italian database of strong ground motion records is used, with a total of 949 horizontal accelerograms (two components). The analysis is performed for 5% damped response spectra in the 0.01-4 s period range. Rotation-independent intensity measures, resulting from combining maximum values of the as-recorded accelerograms, are investigated. The study has also been performed using maximum values of the time histories resulting from the previous combination of as-recorded time histories. Ratios between these rotation-independent intensity measures and those formerly used in ground motion predictive equations have been computed and modelled by means of a simple theoretical model. Thus, the results are useful for updating former strong ground motion predictive equations in a simple and straightforward way., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A drift-correlated ground motion intensity measure: application to steel frame buildings

  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Díaz Carrasco, Sergio
Estimations of seismic risk in urban areas should include quantifications of the expected damage to civil structures subjected to earthquakes. In buildings, this quantification depends on the maximum inter-story drift (MIDR), among other aspects. In this study, the correlation between several intensity measures (IMs) and the maximum inter-story drift of steel structures was investigated. Three steel frame buildings of 3, 7 and 13 stories were used as a testbed. These buildings were modelled as 2D framed structures. For the seismic hazard, forty strong ground motion pairs were selected (80 individual horizontal components) from the Italian database. These records were scaled to a specific peak ground acceleration (PGA) and matched to a design spectrum from Eurocode 8. Nonlinear dynamic analysis was used to estimate the seismic response of the structures. Thus, 720 nonlinear dynamic analyses (NLDA) were performed [3 structures × (80 as recorded accelerograms + 80 scaled records + 80 matched records)]. Preliminary results indicate that PGA and MIDR show the worst correlation. A higher correlation was observed for peak ground velocity, root-mean-square velocity and specific energy density intensity-based measures. Finally, a new IM, which is highly correlated with MIDR, is proposed. This IM is called IΔ-PGV and considers both the PGV and the significant duration., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Seismic risk assessment using stochastic nonlinear models

  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
  • Lantada, Nieves|||0000-0002-9974-6915
  • González Drigo, José Ramón|||0000-0003-2808-670X
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
The basic input when seismic risk is estimated in urban environments is the expected physical damage level of buildings. The vulnerability index and capacity spectrum-based methods are the tools that have been used most to estimate the probability of occurrence of this important variable. Although both methods provide adequate estimates, they involve simplifications that are no longer necessary, given the current capacity of computers. In this study, an advanced method is developed that avoids many of these simplifications. The method starts from current state-of-the-art approaches, but it incorporates non-linear dynamic analysis and a probabilistic focus. Thus, the method considers not only the nonlinear dynamic response of the structures, modeled as multi degree of freedom systems (MDoF), but also uncertainties related to the loads, the geometry of the buildings, the mechanical properties of the materials and the seismic action. Once the method has been developed, the buildings are subjected to earthquake records that are selected and scaled according to the seismic hazard of the site and considering the probabilistic nature of the seismic actions. The practical applications of the method are illustrated with a case study: framed reinforced concrete buildings that are typical of an important district, the Eixample, in Barcelona (Spain). The building typology and the district were chosen because the seismic risk in Barcelona has been thoroughly studied, so detailed information about buildings’ features, seismic hazard and expected risk is available. Hence, the current results can be compared with those obtained using simpler, less sophisticated methods. The main aspects of the method are presented and discussed first. Then, the case study is described and the results obtained with the capacity spectrum method are compared with the results using the approach presented here. The results at hand show reasonably good agreement with previous seismic damage and risk scenarios in Barcelona, but the new method provides richer, more detailed, more reliable information. This is particularly useful for seismic risk reduction, prevention and management, to move towards more resilient, sustainable cities., This research was funded by the research grant program Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This research was also partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Funds (ERDF) of the European Union (EU) through projects with references CGL2015-65913 -P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). The support of these institutions is highly recognized and acknowledged., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Sensitivity analysis of seismic parameters in the Probabilistic Seismic Hazard Assessment (PSHA) for Barcelona applying the new R-CRISIS

  • Aguilar Meléndez, Armando
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Rodriguez Lozoya, H.E.
  • Monterrubio Velasco, Marisol|||0000-0003-0790-1832
  • Escalante Martínez, Jesús E.
  • Campos Ríos, Amelia
One of the most common ways to represent results of the probabilistic seismic hazard assessments (PSHA) are maps of seismic hazard, which usually show values of Peak Ground Acceleration (PGA) in a region for a return period. A common return period is of 475 years. These types of maps are frequently incorporated in seismic codes, which include the minimum requirements to design new buildings. On the other hand, a sensitivity analysis usually gives us additional information about a procedure or result. For instance, a sensitivity analysis about a PSHA can give us information about what variables considered to compute the seismic hazard have a significant influence on the results of seismic hazard. In the present study, we performed a sensitivity analysis related to the PSHA for Barcelona. This analysis was oriented to identify the influence in the results of seismic hazard of the following variables: a) the relationship magnitude-macroseismic intensity chosen to convert values of macroseismic intensity to magnitudes; b) the beta parameter that was used to define part of the seismicity of a seismic source and; c) the ground motion prediction equation (GMPE) which was used to determine intensities values to different distances from the epicenter of earthquakes. For this purpose, we applied the code R-CRISIS, which is the updated version of CRISIS2015. Therefore, the present study had as an additional objective to test the functionality of the new R-CRISIS from the point of view of users. According to the results of the sensitivity analysis of the PSHA of Barcelona both the GMPE and the relationship magnitude-macroseismic intensity are the two variables that have the greater influence on the results of seismic hazard of the present study. For instance, in some results of seismic hazard for the city of Barcelona the values of PGA (for the same return period) differ between them until 82% depending on if we considered the means values of the PGA values of the GMPE or the mean values plus one standard deviation of the PGA values of the GMPE. Finally, according to our experience in the use of the new R-CRISIS in the present study, we can confirm that it is both a powerful and user-friendly software. R-CRISIS has valuable features, for instance, it allows to consider diverse types of criteria to define the type of seismic source. For example, R-CRISIS allows defining different types of geometries of the seismic sources, and different criteria to define the seismicity of each seismic source. An important feature of R-CRISIS is the fact that it includes a database with numerous GMPE ready to be used to compute seismic hazard. Additionally, R-CRISIS has valuables graphical tools which are very helpful during the following two stages: the assigning data and the analysis of results., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Detection of damage using temporal variation in natural frequencies and principal component analysis

  • Caselles Magallón, Josep Oriol|||0000-0002-8280-0882
  • Martín, Aleix
  • Clapés Boixader, Jaime|||0000-0001-5070-8662
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2020, available online at: http://www.tandfonline.com/10.1080/15583058.2020.1831101., Detection of structural damage is an important issue. Some techniques require knowledge of the undamaged state or in-depth knowledge of the construction materials used. The application of principal component analysis to the temporal variation in natural frequencies is a promising technique. With an undamaged structure a single principal component will suffice to explain the change in modal frequencies with weather variables, whereas more components are needed in the case of damaged structures. Like all other detection techniques, it has advantages and drawbacks. The main advantages are the ability to work without knowledge of the previous state of the structure, the relatively short monitoring time required (about 10 days), low cost, and low number of instrumentations. The main drawback is the need for more studies to correlate degree of damage with the number of principal components. This paper presents the results obtained for six structures: Mallorca Cathedral, four university buildings in Barcelona, and a reduced model structure in a laboratory. We also propose a semiautomatic algorithm to track modal frequencies over time and add a discussion of operational modal analysis in real buildings., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund of the European Union through the project referenced as CGL2015-65913-P (MINECO/FEDER, UE). We also want to acknowledge the management and maintenance services of the UPC schools of Industrial Engineering (ETSEIB) and Architecture (ETSAB) for their readiness and help, and the Department of Quantum Physics and Astrophysics of the University of Barcelona for the meteorological data., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A probabilistic approach for seismic risk assessment based on vulnerability functions: application to Barcelona

  • Aguilar Meléndez, Armando
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Barbat Barbat, Horia Alejandro|||0000-0002-3649-8053
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Lantada, Nieves|||0000-0002-9974-6915
  • Rodriguez Lozoya, H.E.
The final publication is available at Springer via http://dx.doi.org/10.1007/s10518-018-0516-4, Risk assessment and management is an important step towards resilient and sustainable cities. Among many other perils, both natural and manmade, seismic risk is a major threat for resilience and sustainability. In recent decades, several methods for seismic risk assessment have been proposed, including the well-known Vulnerability Index Method (VIM). In this study, a probabilistic version of the VIM, which we call the Vulnerability Index Method-Probabilistic (VIM_P), is proposed. The VIM_P requires essential information on the seismic hazard and on the vulnerability of the building stock. Seismic hazard is determined using the exceedance rates of macroseismic intensities, as defined in the European Macroseismic Scale (EMS). Seismic vulnerability is defined by means of vulnerability probability density functions (pdf) that describe the probability distribution of the corresponding vulnerability index. Beta-like functions are used for these pdfs. VIM_P quantifies seismic vulnerability by means of three vulnerability curves, Lower, Best and Upper, according to the quantity and quality of available information, thus allowing three estimates of seismic vulnerability and risk. Then, seismic risk is computed via the convolution of seismic hazard and seismic vulnerability, considering semi-empirical damage functions. Seismic risk is given through the exceedance frequencies of the damage grades. To highlight the capabilities of the VIM_P, the seismic risk of about 70,000 residential buildings in Barcelona was assessed. According to the results, the exceedance frequency of the collapse damage state for more than the 50% of the buildings in the Eixample district would be greater than 1 × 10-5. This confirms the relatively high seismic risk in the city, mainly due to the high vulnerability of the built environment. Specific software, USERISK20015, has been developed for routine applications of VIM_P. It is hoped that VIM_P and this new tool for seismic risk assessment will be useful to stakeholders and civil protection authorities for risk management and prioritizing actions that can help to create more resilient, sustainable cities., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Increased seismic hazard in Barcelona (Spain) due to soil-building resonance effects

  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Macau, Albert
  • Figueras Vila, Sara
In this study, previous microzonation studies in Barcelona (Spain) were revisited, and available data on the predominant periods of soils in the city were compiled to develop an updated microzonation map of the city. In addition, the building database was updated and used to create a map of building fundamental periods. The crossing of soil predominant period and building fundamental period maps led to the detection of areas in which resonance phenomena and, indeed, increased amplification of the structural response are expected. Thus, zones of Barcelona were identified in which the seismic hazard is probably greater due to resonance effects. The improved microzonation maps and the detection of soil-building resonance areas contribute significantly to enhanced precision and awareness of seismic hazard and risk in Barcelona., We thank Lucille Banham for her assistance in the preparation of the English manuscript. This research was partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Fund (ERDF) of the European Union (EU) through the project referenced as CGL2015-65913-P (MINECO/ ERDF, EU). The first author is supported by a Ph.D. scholarship grant from the Government of Panama’s Institute for the Training and Development of Human Resources (IFARHU) and the National Secretariat of Science, Technology, and Innovation (SENACYT)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Case study of a heavily damaged building during the 2016 MW 7.8 Ecuador earthquake: directionality effects in seismic actions and damage assessment

  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Medranda, Irving
  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
In this work, the directionality effects during the MW 7.8 earthquake, which occurred in Muisne (Ecuador) on 16 April 2016, were analyzed under two perspectives. The first one deals with the influence of these effects on seismic intensity measures (IMs), while the second refers to the assessment of the expected damage of a specific building located in Manta city, Ecuador, as a function of its azimuthal orientation. The records of strong motion in 21 accelerometric stations were used to analyze directionality in seismic actions. At the closest station to the epicenter (RRup = 20 km), the peak ground acceleration was 1380 cm/s2 (EW component of the APED station). A detailed study of the response spectra ratifies the importance of directionality and confirms the need to consider these effects in seismic hazard studies. Differences between IMs values that consider the directionality and those obtained from the as-recorded accelerograms are significant and they agree with studies carried out in other regions. Concerning the variation of the expected damage with respect to the building orientation, a reinforced concrete building, which was seriously affected by the earthquake, was taken as a case study. For this analysis, the accelerograms recorded at a nearby station and detailed structural documentation were used. The ETABS software was used for the structural analysis. Modal and pushover analyses were performed, obtaining capacity curves and capacity spectra in the two main axes of the building. Two advanced methods for damage assessment were used to obtain fragility and mean damage state curves. The performance points were obtained through the linear equivalent approximation. This allows estimation and analysis of the expected mean damage state and the probability of complete damage as functions of the building orientation. Results show that the actual probability of complete damage is close to 60%. This fact is mainly due to the greater severity of the seismic action in one of the two main axes of the building. The results are in accordance with the damage produced by the earthquake in the building and confirm the need to consider the directionality effects in damage and seismic risk assessments., This research has been partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects with references CGL2015-65913-P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). R.E.A. holds a PhD fellowship from the Consejo Nacional de Ciencia y Tecnología (CONACyT) in México., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An efficient method for considering the directionality effect of earthquakes on structures

  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Díaz Carrasco, Sergio
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Vargas Alzate, Yeudy Felipe|||0000-0001-7049-071X
This is an Accepted Manuscript of an article published by Taylor & Francis Group in Journal of Earthquake Engineering on 2019, available online at: http://www.tandfonline.com/10.1080/13632469.2019.1597783, Recent research have proven the importance of considering the directionality effect on the expected seismic damage of structures. However, it demands a high computational effort if the nonlinear dynamic analysis (NLDA) is used to estimate the seismic response. This paper presents a simplified approach to obtain peak response parameters for a building subjected to bi-directional ground motions considering the directionality effect. To do so, the maximum and median response spectra, considering all the non-redundant response spectra, of several ground motion pairs are calculated. Afterwards, a spectral matching technique is applied to these spectra and new acceleration components are obtained. A series of NLDA are performed with these new components and the roof displacement and base shear values are calculated. These results are compared with the maximum and median values, calculated by performing a series of NLDA, after rotating the earthquakes records by considering increments of 1° in the interval 0°–180°. The results agree with both approaches validating the efficiency of the simplified proposed approach., This research was partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Fund (ERDF) of the European Union (EU) through the project referenced as CGL2015-65913-P (MINECO/ERDF, EU). The first author is supported by a Ph.D. scholarship grant from the Institute for the Training and Development of Human Resources (IFARHU) and the Government of Panama’s National Secretariat of Science, Technology, and Innovation (SENACYT)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A strong-motion database of Costa Rica: 20 Yr of digital records

  • Moya-Fernandez, Aaron
  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Schmidt-Díaz, Victor
  • Hidalgo-Leiva, Diego
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
In this article, we present a strong-motion database from earthquakes recorded by the Earthquake Engineering Laboratory at the University of Costa Rica. The database consists of 2471 three-component accelerograms from 155 digitally recorded events. It covers the last 20 yr of measurements, including records from the 5 September 2012 Mw 7.6 Nicoya earthquake. The engineering and seismological communities can use this data either to conduct new research or to improve seismic hazard studies in the region. A catalog is also available with metadata of each record containing several intensity measures from the ground-motion time histories., This research was partially funded by the National Emergency and Risk Prevention Law Number 8933 from Costa Rica, the Espacio Universitario de Estudios Avanzados (UCREA) funds from the University of Costa Rica through the project referenced as B9780, and the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) through the project referenced as CGL2015-65913-P. L. A. P. is supported by a Ph.D. Scholarship Grant from the Government of Panama’s Institute for the Training and Development of Human Resources (IFARHU) and the National Secretariat of Science, Technology, and Innovation (SENACYT)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Dynamic soil-structure interaction analyses considering directionality effects

  • Pinzón Ureña, Luis|||0000-0003-3128-7158
  • Mánica Malcom, Miguel Ánge
  • Pujades Beneit, Lluís|||0000-0002-2619-0805
  • Alva Bañuelos, Rodrigo Esteban|||0000-0002-4522-3967
The paper investigates directionality effects of ground motions in the context of dynamic soil-structure interaction (DSSI) analyses. The problem addressed corresponds to a nonlinear soil deposit, overlaying firm ground, where the input motion was derived from an acceleration time history recorded at a rock outcrop. A simplified procedure is proposed to incorporate directionality effects. The main objective is to identify in advance the incidence angle producing the maximum response of a structure for a given earthquake. Results from the simplified procedure were evaluated by comparison with what is called here the complete rotational approach, where the behaviour of the structure, as a function of the incidence angle of the input motion, is derived through a large number of nonlinear dynamic soil-structure interaction analyses. The obtained results show the importance of considering directionality effects in DSSI analyses. The maximum response of the system was reasonably captured with the simplified approach., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

GPR spectra for monitoring asphalt pavements

  • Pedret Rodés, Josep
  • Martínez Reguero, Adriana Haydée|||0000-0002-3709-0463
  • Pérez Gracia, María de la Vega|||0000-0003-3638-3093
Ground Penetrating Radar (GPR) is a prospecting method frequently used in monitoring asphalt pavements, especially as an optimal complement to the defection test that is commonly used for determining the structural condition of the pavements. Its application is supported by studies that demonstrate the existence of a relationship between the parameters determined in GPR data (usually travel time and wave amplitude) and the preservation conditions of the structure. However, the analysis of frequencies is rarely applied in pavement assessment. Nevertheless, spectral analysis is widespread in other fields such as medicine or dynamic analysis, being one the most common analytical methods in wave processing through use of the Fourier transform. Nevertheless, spectral analysis has not been thoroughly applied and evaluated in GPR surveys, specifically in the field of pavement structures. This work is focused on analyzing the behavior of the GPR data spectra as a consequence of different problems affecting the pavement. The study focuses on the determination of areas with failures in bituminous pavement structures. Results epitomize the sensitivity of frequencies to the materials and, in some cases, to the damage., This research has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The study is also a contribution to the EU Action COST TU1208 “Civil Engineering Applications of Ground Penetrating Radar” financed by the European Union., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Seismic risk assessment using stochastic nonlinear models

  • Vargas Alzate, Yeudy Felipe
  • Lantada, Nieves
  • González Drigo, José Ramón
  • Pujades Beneit, Lluís
The basic input when seismic risk is estimated in urban environments is the expected physical damage level of buildings. The vulnerability index and capacity spectrum-based methods are the tools that have been used most to estimate the probability of occurrence of this important variable. Although both methods provide adequate estimates, they involve simplifications that are no longer necessary, given the current capacity of computers. In this study, an advanced method is developed that avoids many of these simplifications. The method starts from current state-of-the-art approaches, but it incorporates non-linear dynamic analysis and a probabilistic focus. Thus, the method considers not only the nonlinear dynamic response of the structures, modeled as multi degree of freedom systems (MDoF), but also uncertainties related to the loads, the geometry of the buildings, the mechanical properties of the materials and the seismic action. Once the method has been developed, the buildings are subjected to earthquake records that are selected and scaled according to the seismic hazard of the site and considering the probabilistic nature of the seismic actions. The practical applications of the method are illustrated with a case study: framed reinforced concrete buildings that are typical of an important district, the Eixample, in Barcelona (Spain). The building typology and the district were chosen because the seismic risk in Barcelona has been thoroughly studied, so detailed information about buildings’ features, seismic hazard and expected risk is available. Hence, the current results can be compared with those obtained using simpler, less sophisticated methods. The main aspects of the method are presented and discussed first. Then, the case study is described and the results obtained with the capacity spectrum method are compared with the results using the approach presented here. The results at hand show reasonably good agreement with previous seismic damage and risk scenarios in Barcelona, but the new method provides richer, more detailed, more reliable information. This is particularly useful for seismic risk reduction, prevention and management, to move towards more resilient, sustainable cities., This research was funded by the research grant program Marie Sklodowska-Curie Actions (MSCA), European Union/European (H2020-MSCA-IF-2017) No 799553. This research was also partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Funds (ERDF) of the European Union (EU) through projects with references CGL2015-65913 -P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). The support of these institutions is highly recognized and acknowledged., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic soil-structure interaction analyses considering directionality effects

  • Pinzón Ureña, Luis
  • Mánica Malcom, Miguel Ánge
  • Pujades Beneit, Lluís
  • Alva Bañuelos, Rodrigo Esteban
The paper investigates directionality effects of ground motions in the context of dynamic soil-structure interaction (DSSI) analyses. The problem addressed corresponds to a nonlinear soil deposit, overlaying firm ground, where the input motion was derived from an acceleration time history recorded at a rock outcrop. A simplified procedure is proposed to incorporate directionality effects. The main objective is to identify in advance the incidence angle producing the maximum response of a structure for a given earthquake. Results from the simplified procedure were evaluated by comparison with what is called here the complete rotational approach, where the behaviour of the structure, as a function of the incidence angle of the input motion, is derived through a large number of nonlinear dynamic soil-structure interaction analyses. The obtained results show the importance of considering directionality effects in DSSI analyses. The maximum response of the system was reasonably captured with the simplified approach., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sensitivity analysis of seismic parameters in the Probabilistic Seismic Hazard Assessment (PSHA) for Barcelona applying the new R-CRISIS

  • Aguilar Meléndez, Armando
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Rodriguez Lozoya, H.E.
  • Monterrubio Velasco, Marisol
  • Escalante Martínez, Jesús E.
  • Campos Ríos, Amelia
One of the most common ways to represent results of the probabilistic seismic hazard assessments (PSHA) are maps of seismic hazard, which usually show values of Peak Ground Acceleration (PGA) in a region for a return period. A common return period is of 475 years. These types of maps are frequently incorporated in seismic codes, which include the minimum requirements to design new buildings. On the other hand, a sensitivity analysis usually gives us additional information about a procedure or result. For instance, a sensitivity analysis about a PSHA can give us information about what variables considered to compute the seismic hazard have a significant influence on the results of seismic hazard. In the present study, we performed a sensitivity analysis related to the PSHA for Barcelona. This analysis was oriented to identify the influence in the results of seismic hazard of the following variables: a) the relationship magnitude-macroseismic intensity chosen to convert values of macroseismic intensity to magnitudes; b) the beta parameter that was used to define part of the seismicity of a seismic source and; c) the ground motion prediction equation (GMPE) which was used to determine intensities values to different distances from the epicenter of earthquakes. For this purpose, we applied the code R-CRISIS, which is the updated version of CRISIS2015. Therefore, the present study had as an additional objective to test the functionality of the new R-CRISIS from the point of view of users. According to the results of the sensitivity analysis of the PSHA of Barcelona both the GMPE and the relationship magnitude-macroseismic intensity are the two variables that have the greater influence on the results of seismic hazard of the present study. For instance, in some results of seismic hazard for the city of Barcelona the values of PGA (for the same return period) differ between them until 82% depending on if we considered the means values of the PGA values of the GMPE or the mean values plus one standard deviation of the PGA values of the GMPE. Finally, according to our experience in the use of the new R-CRISIS in the present study, we can confirm that it is both a powerful and user-friendly software. R-CRISIS has valuable features, for instance, it allows to consider diverse types of criteria to define the type of seismic source. For example, R-CRISIS allows defining different types of geometries of the seismic sources, and different criteria to define the seismicity of each seismic source. An important feature of R-CRISIS is the fact that it includes a database with numerous GMPE ready to be used to compute seismic hazard. Additionally, R-CRISIS has valuables graphical tools which are very helpful during the following two stages: the assigning data and the analysis of results., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A strong-motion database of Costa Rica: 20 Yr of digital records

  • Moya-Fernandez, Aaron
  • Pinzón Ureña, Luis
  • Schmidt-Díaz, Victor
  • Hidalgo-Leiva, Diego
  • Pujades Beneit, Lluís
In this article, we present a strong-motion database from earthquakes recorded by the Earthquake Engineering Laboratory at the University of Costa Rica. The database consists of 2471 three-component accelerograms from 155 digitally recorded events. It covers the last 20 yr of measurements, including records from the 5 September 2012 Mw 7.6 Nicoya earthquake. The engineering and seismological communities can use this data either to conduct new research or to improve seismic hazard studies in the region. A catalog is also available with metadata of each record containing several intensity measures from the ground-motion time histories., This research was partially funded by the National Emergency and Risk Prevention Law Number 8933 from Costa Rica, the Espacio Universitario de Estudios Avanzados (UCREA) funds from the University of Costa Rica through the project referenced as B9780, and the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) through the project referenced as CGL2015-65913-P. L. A. P. is supported by a Ph.D. Scholarship Grant from the Government of Panama’s Institute for the Training and Development of Human Resources (IFARHU) and the National Secretariat of Science, Technology, and Innovation (SENACYT)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

GPR spectra for monitoring asphalt pavements

  • Pedret Rodés, Josep
  • Martínez Reguero, Adriana Haydée
  • Pérez Gracia, María de la Vega
Ground Penetrating Radar (GPR) is a prospecting method frequently used in monitoring asphalt pavements, especially as an optimal complement to the defection test that is commonly used for determining the structural condition of the pavements. Its application is supported by studies that demonstrate the existence of a relationship between the parameters determined in GPR data (usually travel time and wave amplitude) and the preservation conditions of the structure. However, the analysis of frequencies is rarely applied in pavement assessment. Nevertheless, spectral analysis is widespread in other fields such as medicine or dynamic analysis, being one the most common analytical methods in wave processing through use of the Fourier transform. Nevertheless, spectral analysis has not been thoroughly applied and evaluated in GPR surveys, specifically in the field of pavement structures. This work is focused on analyzing the behavior of the GPR data spectra as a consequence of different problems affecting the pavement. The study focuses on the determination of areas with failures in bituminous pavement structures. Results epitomize the sensitivity of frequencies to the materials and, in some cases, to the damage., This research has been partially funded by the Spanish Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through projects referenced as CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The study is also a contribution to the EU Action COST TU1208 “Civil Engineering Applications of Ground Penetrating Radar” financed by the European Union., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Do directionality effects influence expected damage? A case study of the 2017 central Mexico earthquake

  • Pinzón, Luis A.
  • Pujades Beneit, Lluís
  • Díaz, Sergio Alberto
  • Alva Bañuelos, Rodrigo Esteban
We analyze the case of a building that collapsed in a multifamily complex of Tlalpan borough in Mexico City during the 19 September 2017 Central Mexico earthquake. Despite having similar materials and similar structural and geometric properties, this was the only building that collapsed in the complex. A structural analysis of the building and a study of the soils’ predominant periods indicated that resonance effects, if any, would not be significant. However, phenomena related to the anomalous performance of buildings in dense urban areas such as geological soil, soil–structure interaction, and soil–city interaction effects were also investigated. A detailed analysis of the directionality of seismic actions recorded at nearby accelerometric stations and of the azimuths of sound and damaged buildings indicates that directionality effects were responsible for the collapse of the building. Subsequently, a set of 58, two-component acceleration records of the earthquake was used to perform a thorough directionality analysis. The results were then compared with the foreseen uniform hazard response spectra and the design spectra in the city. Seismic actions in the city due to this earthquake were stronger than those corresponding to the uniform hazard response spectra. In addition, although design spectra have been significantly improved in the new 2017 Mexican seismic regulations, they were exceeded in 11 of 58 analyzed spectra. In 4 of these 11 cases, the design spectra were exceeded due to directionality effects. These results confirm the necessity of considering directionality effects in damage assessments, strong-motion prediction equations, and design regulations., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic monitoring of a mid-rise building by real-aperture radar interferometer: advantages and limitations

  • Alva Bañuelos, Rodrigo Esteban
  • Pujades Beneit, Lluís
  • González Drigo, José Ramón
  • Luzi, Guido
  • Caselles Magallón, Josep Oriol
  • Pinzón Ureña, Luis
In this paper, remote and in situ techniques to estimate the dynamic response of a building to ambient vibration are reported: data acquired through a real-aperture radar (RAR) interferometer and conventional accelerometers are analyzed. A five-story reinforced concrete housing building, which was damaged during the May 11th 2011 Lorca (Spain) earthquake, is used as a case study. The building was monitored using both types of instruments. The dynamic properties of the building are estimated first taking acceleration measurements using a set of 10 high-precision accelerometers installed on the roof of the building. Further, the displacement–time histories, recorded with the RAR device pointing to a corner of the building, are analyzed. Then, the ability and shortcomings of RAR measurements to deal with the fundamental frequencies of vibration of the structure are investigated. The advantages and limitations of from-inside (accelerometric) and from-outside (RAR) measurements are highlighted and discussed. A relevant conclusion is that, after strong earthquakes, RAR may be an interesting and useful tool, as it allows surveying the structural response of mid-rise buildings remotely, without the need to enter the structures, which may be dangerous for inspectors or technicians in cases of severely damaged buildings. Given that the instrumented building suffered significant damage, the ability of these kinds of measurements to detect damage is also discussed., This research has been partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects with references CGL2015-65913-P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). R.E.A. holds a PhD fellowship from the Consejo Nacional de Ciencia y Tecnología (CONACyT) in México. L.A.P. is supported by a Ph.D. scholarship grant from the Institute for the Training and Development of Human Resources (IFARHU) and the Government of Panama’s National Secretariat of Science, Technology, and Innovation (SENACYT)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Case study of a heavily damaged building during the 2016 MW 7.8 Ecuador earthquake: directionality effects in seismic actions and damage assessment

  • Pinzón Ureña, Luis
  • Pujades Beneit, Lluís
  • Medranda, Irving
  • Alva Bañuelos, Rodrigo Esteban
In this work, the directionality effects during the MW 7.8 earthquake, which occurred in Muisne (Ecuador) on 16 April 2016, were analyzed under two perspectives. The first one deals with the influence of these effects on seismic intensity measures (IMs), while the second refers to the assessment of the expected damage of a specific building located in Manta city, Ecuador, as a function of its azimuthal orientation. The records of strong motion in 21 accelerometric stations were used to analyze directionality in seismic actions. At the closest station to the epicenter (RRup = 20 km), the peak ground acceleration was 1380 cm/s2 (EW component of the APED station). A detailed study of the response spectra ratifies the importance of directionality and confirms the need to consider these effects in seismic hazard studies. Differences between IMs values that consider the directionality and those obtained from the as-recorded accelerograms are significant and they agree with studies carried out in other regions. Concerning the variation of the expected damage with respect to the building orientation, a reinforced concrete building, which was seriously affected by the earthquake, was taken as a case study. For this analysis, the accelerograms recorded at a nearby station and detailed structural documentation were used. The ETABS software was used for the structural analysis. Modal and pushover analyses were performed, obtaining capacity curves and capacity spectra in the two main axes of the building. Two advanced methods for damage assessment were used to obtain fragility and mean damage state curves. The performance points were obtained through the linear equivalent approximation. This allows estimation and analysis of the expected mean damage state and the probability of complete damage as functions of the building orientation. Results show that the actual probability of complete damage is close to 60%. This fact is mainly due to the greater severity of the seismic action in one of the two main axes of the building. The results are in accordance with the damage produced by the earthquake in the building and confirm the need to consider the directionality effects in damage and seismic risk assessments., This research has been partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects with references CGL2015-65913-P (MINECO/ERDF, EU) and EFA158/16/POCRISC (INTERREG/POCTEFA. EU). R.E.A. holds a PhD fellowship from the Consejo Nacional de Ciencia y Tecnología (CONACyT) in México., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Detection of damage using temporal variation in natural frequencies and principal component analysis

  • Caselles Magallón, Josep Oriol
  • Martín, Aleix
  • Clapés Boixader, Jaime
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2020, available online at: http://www.tandfonline.com/10.1080/15583058.2020.1831101., Detection of structural damage is an important issue. Some techniques require knowledge of the undamaged state or in-depth knowledge of the construction materials used. The application of principal component analysis to the temporal variation in natural frequencies is a promising technique. With an undamaged structure a single principal component will suffice to explain the change in modal frequencies with weather variables, whereas more components are needed in the case of damaged structures. Like all other detection techniques, it has advantages and drawbacks. The main advantages are the ability to work without knowledge of the previous state of the structure, the relatively short monitoring time required (about 10 days), low cost, and low number of instrumentations. The main drawback is the need for more studies to correlate degree of damage with the number of principal components. This paper presents the results obtained for six structures: Mallorca Cathedral, four university buildings in Barcelona, and a reduced model structure in a laboratory. We also propose a semiautomatic algorithm to track modal frequencies over time and add a discussion of operational modal analysis in real buildings., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund of the European Union through the project referenced as CGL2015-65913-P (MINECO/FEDER, UE). We also want to acknowledge the management and maintenance services of the UPC schools of Industrial Engineering (ETSEIB) and Architecture (ETSAB) for their readiness and help, and the Department of Quantum Physics and Astrophysics of the University of Barcelona for the meteorological data., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An efficient method for considering the directionality effect of earthquakes on structures

  • Pinzón Ureña, Luis
  • Díaz Carrasco, Sergio
  • Pujades Beneit, Lluís
  • Vargas Alzate, Yeudy Felipe
This is an Accepted Manuscript of an article published by Taylor & Francis Group in Journal of Earthquake Engineering on 2019, available online at: http://www.tandfonline.com/10.1080/13632469.2019.1597783, Recent research have proven the importance of considering the directionality effect on the expected seismic damage of structures. However, it demands a high computational effort if the nonlinear dynamic analysis (NLDA) is used to estimate the seismic response. This paper presents a simplified approach to obtain peak response parameters for a building subjected to bi-directional ground motions considering the directionality effect. To do so, the maximum and median response spectra, considering all the non-redundant response spectra, of several ground motion pairs are calculated. Afterwards, a spectral matching technique is applied to these spectra and new acceleration components are obtained. A series of NLDA are performed with these new components and the roof displacement and base shear values are calculated. These results are compared with the maximum and median values, calculated by performing a series of NLDA, after rotating the earthquakes records by considering increments of 1° in the interval 0°–180°. The results agree with both approaches validating the efficiency of the simplified proposed approach., This research was partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Fund (ERDF) of the European Union (EU) through the project referenced as CGL2015-65913-P (MINECO/ERDF, EU). The first author is supported by a Ph.D. scholarship grant from the Institute for the Training and Development of Human Resources (IFARHU) and the Government of Panama’s National Secretariat of Science, Technology, and Innovation (SENACYT)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An efficient methodology to estimate probabilistic seismic damage curves

  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Hurtado Gómez, Jorge Eduardo
The incremental dynamic analysis (IDA) is a powerful methodology that can be easily extended for calculating probabilistic seismic damage curves. These curves are metadata to assess the seismic risk of structures. Although this methodology requires a relevant computational effort, it should be the reference to correctly estimate the seismic risk of structures. Nevertheless, it would be of high practical interest to have a simpler methodology, based for instance on the pushover analysis (PA), to obtain similar results to those based on IDA. In this article, PA is used to obtain probabilistic seismic damage curves from the stiffness degradation and the energy of the nonlinear part of the capacity curve. A fully probabilistic methodology is tackled by means of Monte Carlo simulations with the purpose of establishing that the results based on the simplified proposed approach are compatible with those obtained with the IDA. Comparisons between the results of both approaches are included for a low- to midrise reinforced concrete building. The proposed methodology significantly reduces the computational effort when calculating probabilistic seismic damage curves., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A drift-correlated ground motion intensity measure: application to steel frame buildings

  • Pinzón Ureña, Luis
  • Vargas Alzate, Yeudy Felipe
  • Pujades Beneit, Lluís
  • Díaz Carrasco, Sergio
Estimations of seismic risk in urban areas should include quantifications of the expected damage to civil structures subjected to earthquakes. In buildings, this quantification depends on the maximum inter-story drift (MIDR), among other aspects. In this study, the correlation between several intensity measures (IMs) and the maximum inter-story drift of steel structures was investigated. Three steel frame buildings of 3, 7 and 13 stories were used as a testbed. These buildings were modelled as 2D framed structures. For the seismic hazard, forty strong ground motion pairs were selected (80 individual horizontal components) from the Italian database. These records were scaled to a specific peak ground acceleration (PGA) and matched to a design spectrum from Eurocode 8. Nonlinear dynamic analysis was used to estimate the seismic response of the structures. Thus, 720 nonlinear dynamic analyses (NLDA) were performed [3 structures × (80 as recorded accelerograms + 80 scaled records + 80 matched records)]. Preliminary results indicate that PGA and MIDR show the worst correlation. A higher correlation was observed for peak ground velocity, root-mean-square velocity and specific energy density intensity-based measures. Finally, a new IM, which is highly correlated with MIDR, is proposed. This IM is called IΔ-PGV and considers both the PGV and the significant duration., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Directionality models from ground motions of Italy

  • Pinzón, Luis A.
  • Pujades Beneit, Lluís
  • Hidalgo Leiva, D.A.
  • Díaz, Sergio Alberto
Directionality effects on the expected strong ground motion in Italy are investigated. After a brief description of the directionality effect and the intensity measures involved, a wide Italian database of strong ground motion records is used, with a total of 949 horizontal accelerograms (two components). The analysis is performed for 5% damped response spectra in the 0.01-4 s period range. Rotation-independent intensity measures, resulting from combining maximum values of the as-recorded accelerograms, are investigated. The study has also been performed using maximum values of the time histories resulting from the previous combination of as-recorded time histories. Ratios between these rotation-independent intensity measures and those formerly used in ground motion predictive equations have been computed and modelled by means of a simple theoretical model. Thus, the results are useful for updating former strong ground motion predictive equations in a simple and straightforward way., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Increased seismic hazard in Barcelona (Spain) due to soil-building resonance effects

  • Pinzón Ureña, Luis
  • Pujades Beneit, Lluís
  • Macau, Albert
  • Figueras Vila, Sara
In this study, previous microzonation studies in Barcelona (Spain) were revisited, and available data on the predominant periods of soils in the city were compiled to develop an updated microzonation map of the city. In addition, the building database was updated and used to create a map of building fundamental periods. The crossing of soil predominant period and building fundamental period maps led to the detection of areas in which resonance phenomena and, indeed, increased amplification of the structural response are expected. Thus, zones of Barcelona were identified in which the seismic hazard is probably greater due to resonance effects. The improved microzonation maps and the detection of soil-building resonance areas contribute significantly to enhanced precision and awareness of seismic hazard and risk in Barcelona., We thank Lucille Banham for her assistance in the preparation of the English manuscript. This research was partially funded by the Spanish Government’s Ministry of Economy and Competitiveness (MINECO) and by the European Regional Development Fund (ERDF) of the European Union (EU) through the project referenced as CGL2015-65913-P (MINECO/ ERDF, EU). The first author is supported by a Ph.D. scholarship grant from the Government of Panama’s Institute for the Training and Development of Human Resources (IFARHU) and the National Secretariat of Science, Technology, and Innovation (SENACYT)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Seismic site classification from the horizontal-to-vertical response spectral ratios: use of the Spanish strong-motion database

  • Pinzón, Luis A.
  • Pujades Beneit, Lluís
  • Macau, Albert
  • Carreño, Emilio
  • Alcalde Camino, Juan Manuel
Normally, the average of the horizontal-to-vertical (H/V) ratios of the 5% damped response spectra of ground motions is used to classify the site of strong-motion stations. In these cases, only the three-orthogonal as-recorded acceleration components are used in the analysis, and all the vector compositions that can generate a different response for each period oscillator are excluded. In this study, the Spanish strong-motion database was used to classify the sites of accelerometric stations based on the predominant periods through the average horizontal-to-vertical spectral ratios (HVSR) of recorded ground motions. Moreover, the directionality effects using the vector composition of the horizontal components of ground motions were also considered in the estimations of H/V ratios. This consideration is a relevant novelty compared to the traditional H/V ratios methods. Only earthquakes with magnitudes above 3.5 and hypocentral distances below 200 km were selected, which resulted in 692 ground-motion records, corresponding to 86 stations, from events in the period between 1993 and 2017. After the analysis, a predominant-period site classification was assigned to each station. On the whole, the obtained mean and standard deviation values of the spectral ratios are comparable to those shown by other researchers. Therefore, the advantages of the proposed procedure, which takes the directionality effects into account, can be summarized as follows: (a) The obtained information is richer and gives enables more sophisticated and realistic analyses on the basis of percentiles and (b) it is easier to detect anomalous stations, sites, and/or accelerograms. Moreover, the method eliminates the effect of directionality as a contributor to epistemic uncertainty., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A probabilistic approach for seismic risk assessment based on vulnerability functions: application to Barcelona

  • Aguilar Meléndez, Armando
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Ordaz Schroeder, Mario Gustavo
  • Puente, Josep de la
  • Lantada, Nieves
  • Rodriguez Lozoya, H.E.
The final publication is available at Springer via http://dx.doi.org/10.1007/s10518-018-0516-4, Risk assessment and management is an important step towards resilient and sustainable cities. Among many other perils, both natural and manmade, seismic risk is a major threat for resilience and sustainability. In recent decades, several methods for seismic risk assessment have been proposed, including the well-known Vulnerability Index Method (VIM). In this study, a probabilistic version of the VIM, which we call the Vulnerability Index Method-Probabilistic (VIM_P), is proposed. The VIM_P requires essential information on the seismic hazard and on the vulnerability of the building stock. Seismic hazard is determined using the exceedance rates of macroseismic intensities, as defined in the European Macroseismic Scale (EMS). Seismic vulnerability is defined by means of vulnerability probability density functions (pdf) that describe the probability distribution of the corresponding vulnerability index. Beta-like functions are used for these pdfs. VIM_P quantifies seismic vulnerability by means of three vulnerability curves, Lower, Best and Upper, according to the quantity and quality of available information, thus allowing three estimates of seismic vulnerability and risk. Then, seismic risk is computed via the convolution of seismic hazard and seismic vulnerability, considering semi-empirical damage functions. Seismic risk is given through the exceedance frequencies of the damage grades. To highlight the capabilities of the VIM_P, the seismic risk of about 70,000 residential buildings in Barcelona was assessed. According to the results, the exceedance frequency of the collapse damage state for more than the 50% of the buildings in the Eixample district would be greater than 1 × 10-5. This confirms the relatively high seismic risk in the city, mainly due to the high vulnerability of the built environment. Specific software, USERISK20015, has been developed for routine applications of VIM_P. It is hoped that VIM_P and this new tool for seismic risk assessment will be useful to stakeholders and civil protection authorities for risk management and prioritizing actions that can help to create more resilient, sustainable cities., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Integrated GPR and laser vibration surveys to preserve prehistorical painted caves: Cueva Pintada case study

  • Caselles Magallón, Josep Oriol
  • Clapés Boixader, Jaime
  • Sáenz Sagasti, José Ignacio
  • Pérez Gracia, María de la Vega
  • Rodríguez Santana, Carmen Gloria
This is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Architectural Heritage on 2019, available online at: http://www.tandfonline.com/10.1080/15583058.2019.1643947, The study of structural safety when it is covered by important paintings requires a careful analysis without affecting the paintings. Therefore, non-destructive surveys are the only feasible method to obtain data about its state. In Cueva Pintada case, the problem requires a detailed but noninvasive analysis because this cave was dug in volcanic tuff. The tuff presents poor consolidation. This geological material is very sensitive to vibration. Furthermore, the proximity to the city downtown increases vibrations due to traffic. Recently, a small rockfall produces damage and alerted of the cave state of conservation. The painting walls constraint many of the NDT surveys. Two methodologies have been applied: ground-penetrating radar (GPR) and passive seismic. GPR analysis allowed determining the inner structure of the tuff cave, and results were used to determine the zones that required a wider and dense vibration study. Radar images show important anomalies at depths of about 0.2 m to 0.8 m and from 1.5 m to the top of the roof, almost horizontal. Amplification factor measured by passive seismic survey ranges from 0.03 to 93, with near half of the ceil with amplifications higher than 5 and about 10% with amplifications over 50 times., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (FEDER) of the European Union (UE) through the project referenced as CGL2015-65913-P (MINECO/ FEDER, UE)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Energy damage index based on capacity and response spectra

  • Díaz Alvarado, Sergio Alberto
  • Pujades Beneit, Lluís
  • Barbat Barbat, Horia Alejandro
  • Vargas Alzate, Yeudy Felipe
  • Hidalgo Leiva, D.A.
Non-linear dynamic analysis and the damage index of Park-Ang have been often used to assess expected seismic damage to a structure. Depending on the size of the structure and the duration of the record, the computational effort in dynamic analyses is usually high. In this research, a new damage index is proposed based on nonlinear static analysis. The damage index is a linear combination of two energy functions: (1) the strain energy associated with the stiffness variation and the ductility of the structure, and (2) the dissipated energy associated with hysteretic cycles. These two energy functions are obtained from the capacity curve of the structure and from the energy balance with the spectral acceleration. To show the ability of the index to represent damage, low-rise steel buildings were studied under the seismic actions that are expected in Mexico City. The results obtained with the new method show good agreement with those calculated by means of dynamic analyses using the Park-Ang damage index. On average, the Park-Ang damage index is well-fitted by the combination of 62% of the strain energy and 38% of the energy dissipated by hysteresis. Moreover, the new damage index can link damage to certain characteristics of seismic actions, such as their intensity and duration. Therefore, the new approach results in a practical, powerful tool for estimating seismic damage in buildings, especially as probabilistic approaches require massive computations., This research was partially funded by the Ministry of Economy and Competitiveness (MINECO) of the Spanish Government and by the European Regional Development Fund (ERDF) of the European Union (EU) through projects referenced as: CGL2011-23621 and CGL2015-65913-P (MINECO/FEDER, UE). The first author holds PhD fellowships from the Universidad Juarez Autonoma de Tabasco (UJAT) and from the ‘Programa de Mejoramiento del Profesorado, Mexico (PROMEP)’., Peer Reviewed, Postprint (author's final draft)