Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electron Channeling Contrast Imaging for the Characterization of Dislocations in III-V Thin Films on Silicon (001)

  • Monge-Bartolome, Laura
  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Peiro Codoñer, Alicia
  • Yan, Zhao
  • Garcia Vara, Ivan
  • Baron, Thierry
  • Li, Qiang
[EN] Characterization of defects is essential for the semiconductor industry, as they can be detrimental to device performance. Electron channeling contrast imaging(ECCI) is an electron diffraction technique performed in a scanning electron microscope that has emerged as a fast and nondestructive technique for defect characterization. Herein, ECCI is applied to the characterization of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on silicon. Thein¿uence of the electron-beam parameters (beam energy and current) is studied to optimize the ECCI micrographs. Additionally, the in¿uence of the diffraction condition on the visibility and contrast of two types of extended defects¿threading dislocations and stacking faults¿is studied. Moreover, the in¿uence of the diffraction conditions on the density of extended defects measured in the ECCI micrographs is studied, giving a lower limit of the extended defects density. This work shows that ECCI is a promising technique for deep study of extended defects in the heteroepitaxy of III¿V semiconductor thin ¿lms on Si, revealing a huge potential for wafer mapping, which is crucial for homogeneity testing and scalability., This work was supported in part by the project Zero-loss Energy harvesting Using nanowire solar cells in Space , funded by the European Union, Horizon Europe, EIC Project 101161465 (ZEUS). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). L.M.B. acknowledges Ayuda a Primeros Proyectos de Investigación (PAID-06-24), Vicerrectorado de Investigación de la Universitat Politècnica de València (UPV). V.J.G. acknowledges the Generalitat Valenciana (CDEIGENT/2020/009, and ESGENT/2024/17), the Conselleria de Educación, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/ 501100011033 and by European Union NextGenerationEU/PRTR . All authors acknowledge AGENCIA ESTATAL DE INVESTIGACIÓN of Ministerio de Ciencia e Innovacion (PID2024-162261NB-I00 and EQC2021- 007244-P) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061), and the Quantum Communications program supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optomechanical Cavities Based on Epitaxial GaP on Nominally (001)-Oriented Si

  • Mouriño-Miñambres, Paula|||0009-0003-6511-1246
  • Mercadé, Laura|||0000-0002-4994-7727
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Griol Barres, Amadeu
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Ben Saddik, Karim
  • Barrigón, Enrique
  • Fernández-Garrido, Sergio
  • García, Basilio Javier
[EN] Gallium Phosphide (GaP) has recently received considerable attention as a suitable material for building photonic integrated circuits due to its remarkable optical and piezoelectric properties. Usually, GaP is grown epitaxially on III-V substrates to keep its crystallinity and later transferred to silicon wafers for further processing. Here, an alternative promising route for the fabrication of optomechanical (OM) cavities on GaP epitaxially grown on nominally (001)-oriented Si is introduced by using a two-step process consisting of a low-temperature etching of GaP followed by selective etching of the underneath silicon. The low-temperature (-30 degrees C) during the dry-etching of GaP hinders the lateral etching rate, preserving the pattern with a deviation between the design and the pattern in the GaP layer lower than 5%, avoiding the complex process of transferring and bonding a GaP wafer to a silicon-on-insulator wafer. To demonstrate the quality and feasibility of the proposed fabrication route, suspended OM cavities are fabricated and experimentally characterized. The cavities exhibit optical quality factors between 103 and 104 at telecom wavelengths, and localized mechanical resonances approximate to 3.1 GHz with quality factors approximate to 63 when measured at room temperature. These results suggest a simple and low-cost way to build GaP-based photonic devices directly integrated on industry-standard Si(001) photonic wafers.; Here, optomechanical (OM) cavities on Gallium Phosphide (GaP) epitaxially grown on exact (001)-Si are fabricated following a novel two-step dry-etching process. The suspended OM cavities showed optical Q-factors up to 104 at telecom wavelengths, and mechanical resonances at approximate to 3.1 GHz at room temperature, suggesting a simple and low-cost way to build GaP-based photonic devices directly integrated on Si(001) photonic wafers. image, P.M. and L.M. contributed equally to this work. V.J.G., P.M, and R.R acknowledge financial support from the Generalitat Valenciana (Project: INVEST/2022/170). M.S.L. acknowledges financial support from the Generalitat Valenciana (Project: CIAPOS/2021/293). V.J.G. acknowledges financial support from the Generalitat Valenciana (CDEIGENT/2020/009), partial funding from the Conselleria de Educacion, Universidades y Empleo under the NIRVANA Grant (PROMETEO Program, CIPROM/2022/14), and to the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". S.F.G. acknowledges the financial support received through the program Ramon y Cajal (co-financed by the European Social Fund) under Grant No. RYC-2016-19509. All authors acknowledge financial support from The AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00, PID2020-114280RB-I00, and PID2021-124618NB-C21) and to the European Regional Development Fund (ERDF) (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Quantum Communications program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003 and COMCUANTICA/004).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid dielectric-graphene nanostructured SERS substrates for antibody sensing

  • Redolat-Querol, Javier Abilio
  • Pérez, Maria Camarena
  • Zorina, Sofiya
  • Zafra, Eva
  • Alonso Chornet, Mar
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • González-Llacer, Ignacio
  • Díaz-Escobar, Evelyn
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Pinilla-Cienfuegos, Elena|||0000-0002-3734-0821
[EN] We present a hybrid surface-enhanced Raman spectroscopy (SERS) platform based on a nanostructured silicon substrate integrated with functionalized graphene for the selective detection of biomolecules such as prolactin and SARS-CoV-2 antibodies. The high-index substrate comprises an array of subwavelength silicon nanopillars that support Mie-type optical resonances, enabling strong electromagnetic field confinement with minimal heating and optical losses. Graphene monolayers are transferred onto the nanopillar array and functionalized using 1-pyrenebutanoic acid succinimidyl ester (PBASE), thus facilitating the selective immobilization of target antibodies via ¿¿¿ interactions and covalent bonding. Graphene transfer, functionalization, and analyte binding are confirmed by the SERS enhancement, which enables label-free detection at low laser power, avoiding photodamage and ensuring compatibility with sensitive biomolecules. Strain and doping analysis, performed through Raman vector decomposition, reveals distinct responses associated with each antibody, validating the sensor's capability for molecular discrimination., A. M. and E. P. C acknowledge funding from Generalitat Valenciana (GVA) under grants CIPROM/2022/14 (NIRVANA) and AP2020-33 (GRAFEBIOCOV). E. P. C. further acknowledges financial support from the GVA through grant SEJIGENT/2021/ 039, Agencia Estatal de Investigaci¿on, Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI), through project PID2021-128442NA-I00 and through grant CNS2024-154922, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M.S.L. and V. J. G. acknowledge financial support from the GVA through grants CIAPOS/2021/293, CDEIGENT/2020/009, and ESGENT/2024/17; and MCIN/AEI through project PID2020-118855RB-I00. M. S. L. also acknowledges support from the Ayuda a Primeros Proyectos de Investigación (PAID-06-24), funded by the Vicerrectorado de Investigación of the Universitat Politècnica de València (UPV). V. J. G. further acknowledges support from the MCIN/AEI through grant CNS2023-145093, funded by MICIU/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. M. C. P. acknowledges the SPARCLE consortium, and Delft University of Technology. This study also forms part of the Advanced Materials program supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by GVA through project MFA/2022/025 (ARCANGEL).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Formation Mechanisms of (In,Ga)N Nanoshells Conformally Grown around Pencil-like GaN Nanowires

  • Obradovic, Jovana
  • Tinoco, Miguel
  • Torres-Pardo, Almudena
  • Fernandez-Garrido, Sergio
  • Guzman, Alvaro
  • Gacevic, Zarko
  • Monge-Bartolome, Laura
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
[EN] We present a comprehensive study on the formation mechanisms of (In,Ga)N nanoshells conformally grown around pencil-like GaN nanowires by plasma-assisted molecular beam epitaxy. A detailed growth model is proposed, describing the morphological evolution of the nanoshell tip from an initial truncated pyramid to the final pyramidal form. This transformation is likely driven by the minimization of surface energy of the growing nanocrystal, more precisely, by a change in the preferential semipolar growth plane, from the r-plane (1012), for the GaN nanowire core, to the s-plane (1011), for the overgrown (In,Ga)N nanoshell. Furthermore, we investigate the facet- and temperature-dependent incorporation of indium, showing that the indium content is higher at the nanowire tip than on the sidewalls and decreases with increasing growth temperature across all facets. Finally, by making simple approximations, we provide quantitative estimations of the indium concentration in the nanoshell, offering partial quantitative insight into the composition profile. These findings contribute to the understanding and more precise control of (In,Ga)N nanoshell growth for employment in nanowire-based optoelectronic devices., This work has been supported by the project Madrid Quantum funded by the European Union Next Generation, PRTR-C17.I1, MCIN/AEl/10.13039/501100011033 and by project NextGen-SPS, PID2022-136626OB-C31 found by the Spanish Ministry of Science. We also acknowledge the financial support provided by the European COST Action OPERA (CA-20116) through the short-term scientific mission program and use of the Spanish ICTS Network MICRONANOFABS for the realization of this work. V.J.G. acknowledges financial support from the Generalitat Valenciana (ESGENT/2024/17), AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR" and Grant EQC2021-007244-P. This study formed part of the Quantum Communications program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (COMCUANTICA/003).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design, Fabrication, and Characterization of Graphene-Silicon Nitride Integrated Mode Filters

  • Martín-Romero, Fernando|||0009-0003-0930-3921
  • Resta-López, Raquel|||0009-0007-8657-0782
  • Fontelles-Lopez, Oscar
  • Sinusia-Lozano, Miguel|||0000-0002-1744-4148
  • Gómez-Hernández, Víctor Jesús|||0000-0003-2364-8814
[EN] We present the design, fabrication, and characterization of broadband graphene-silicon nitride integrated mode filters working in the optical C-band, centered at a wavelength of 1.55 mu m. The devices presented here prevent modal crosstalk, thus avoiding signal degradation in multimode communication systems. In particular, the fabricated filters are based on a dual-mode silicon nitride waveguide, partially covered by a centered graphene nanoribbon that induces a stronger absorption for the TE0 mode than for the TE1 mode. The geometry of the design has been optimized to minimize the length and insertion losses of the device. A complete fabrication process, including the transfer and lithography of commercial graphene, has been developed. A novel approach was introduced during the etching step, which entailed the simultaneous curing of the resist to encapsulate the graphene nanoribbons prior to the deposition of the upper cladding. Finally, transmission through an array of fully fabricated filters of varying lengths was characterized with a measurement setup employing optical fiber coupling. The maximum experimentally measured contrast between the TE0 and TE1 modes is 123 dB/cm, achieved at a wavelength of 1569 nm, simultaneously with a minimum loss of -38 dB/cm for the TE1 mode. Overall, we fully demonstrate an integrated mode filter based on commercial graphene that paves the way for the implementation of integrated multimode optical communication systems., F.M.-R. acknowledges financial support from the Generalitat Valenciana (CIACIF/2022/188). M.S.L. and V.J.G. acknowledge financial support from the Generalitat Valenciana (CIAPOS/2021/293, CDEIGENT/2020/009, and ES-GENT/2024/17). M.S.L. acknowledges Ayuda a Primeros Proyectos de Investigacion (PAID-06-24), Vicerrectorado de Investigacion de la Universitat Politecnica de Valencia (UPV). V.J.G. acknowledges the AGENCIA ESTATAL DE INVES-TIGACION of Ministerio de Ciencia, Innovacion y Universidades Grant CNS2023-145093 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR". All authors acknowledge financial support from the AGENCIA ESTATAL DE INVESTIGACION of Ministerio de Ciencia e Innovacion (PID2020-118855RB-I00 and PID2024-162261NB-I00) and to the European Regional Development Fund (IDIFEDER/2020/041, IDIFEDER/2021/061). This study formed part of the Advanced Materials program and was supported by Ministerio de Ciencia e Innovacion (MCIN) with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (MFA/2022/025). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.