Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Screening of Iberian Coinage in the 2(th)-1(th) BCE Period Using the Voltammetry of Immobilized Particles

  • Doménech-Carbó, Antonio
  • Álvarez-Romero, Carla
  • Pasíes, Trinidad
  • Buendía, Milagros
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The voltammetry of immobilized particles (VIMP) was applied for grouping a series of 86 Iberian coins nominally minted in the cities of Iltirta, Castulo and Obulco in the 2(th)-1(th) BCE period for which there are no chronological data. Using characteristic signatures for the reduction of cuprite, tenorite and lead corrosion products in the patina of the coins, voltammetric grouping of coins was proposed. Voltammetric data were found to be consistent with textural and compositional properties of the surface and subsurface of selected coins using FIB-FESEM-EDX. The obtained data confirmed a clear separation between the productions of Iltirta on one side, and those of Castulo and Obulco on the other side, indicating the possibility to establish a rough chronology for these productions., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged. The authors wish also to thank Mr. Manuel Planes and Dr. Jose Luis Moya, technical supervisors of the Electron Microscopy Service of the Universitat Politecnica de Valencia. Thanks to Manuel Gozalbes for his technical assistance in the numismatic domain and Gonzalo Cores and the Museu de Prehistrica de Valencia for facilitating the access to its collections.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solid-state electrochemical characterization of emissions and authorities producing Roman brass coins

  • Di Fazio, Melania
  • Felici, Anna Candida
  • Catalli, Fiorenzo
  • De Vito, Caterina
  • Doménech-Carbó, Antonio
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The voltammetry of immobilized particles (VIMP) is applied to describe the solid state electrochemistry of brass. This methodology, which involves sampling at the nanogram level, is applied to discriminate mints/authorities producing different Roman monetary emissions covering since the Republic (88 BCE) to Domitianus (55-96 CE) Upon attachment to graphite electrodes in contact with aqueous acetate buffer at pH 4.75, well defined voltarnmetric responses were obtained centered on Cu- and Zn-localized signals whose intensity can be correlated to EMP data, being sensitive to the contents of Zn (15-30 wt.%) and Sn (0.01-1.1 wt.%). Voltammetric data, combined with ATR-FTIR and FIB-PESEM/EDS, yield information on the structure of the metal patina and permit to characterize different monetary emissions being able, in the case of Augustus' sestertii, to discriminate between the productions from different monetary authorities., Financial support is gratefully acknowledged from the Spanish "R + D +I" project CTQ2017-85317-C2-1-P, CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2-P, which are supported by the Ministerio de Glenda, Innovacion y Universidades, Fondo Europeo de Desarrollo Regional (ERDF) funds and Agenda Estatal de Investigacion (AEI). The authors wish to thank Mr. Manuel Planes, Dr. Jose Luis Moya and Mrs. Alicia Nuez Inberrion, technical supervisors of the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Discrimination and Provenances of Phoenician Red Slip Ware Using both the Solid State Electrochemistry and Petrographic Analyses

  • Fabrizi, Lucilla
  • Nigro, Lorenzo
  • Cappella, Federico
  • Spagnoli, Federica
  • Guirguis, Michele
  • Niveau de Villedary-Mariñas, Ana Maria
  • de Vito, Caterina
  • Doménech Carbó, Antonio
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] Solid state electrochemistry based on the voltammetry of immobilized microparticles (VIMP) methodology is applied to a series of 80 Phoenician Red Slip samples from the archaeological sites of Motya (Sicily, Italy), Mogador (Morocco), Ramat-Rahel (Israel), Sulky (Sardinia, Italy), Tas Silg (Malta), Pantelleria (Italy), and Cadiz (Spain), dated from the 8(th) to the 6(th) century BC. Upon attachment of sub-microsamples to graphite electrodes in contact with aqueous H2SO4 electrolyte, voltammetric features due to the reduction of Fe(III) minerals and the oxidation of Fe(II) ones, complemented with electrocatalytic effects on oxygen reduction and oxygen evolution reactions, provide characteristic electrochemical fingerprints for pottery samples. A consistent sample grouping discriminating between different potteries from different archaelogical sites, is obtained, all results being consistent with morphological, compositional and mineralogical data. Petrographic analysis supports the grouping, defining the manufacture and firing procedure for the different archaeological context., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged. We are grateful to the Sapienza University of Rome fund for Great Excavations for supporting the project on the island of Motya which contributed to this study, as well as the Superintendency of Trapani of the Sicilian Region and G. Whitaker Foundation for providing support to the research. Financial support was provided by Sapienza University of Rome (Ateneo funding, 2016, 17, 18) and Ministero dell'Istruzione, dell'Universita e della Ricerca (funding FFABR 2017). PhD grants of the Department of Earth Sciences, Sapienza University of Rome, are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microchemical surface analysis of historic copper-based coins by the combined use of FIB-FESEM-EDX, OM, FTIR spectroscopy and solid-state electrochemical techniques

  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Osete Cortina, Laura|||0000-0003-0709-5885
  • Martínez Bazán, Mª Luisa
  • Álvarez-Romero, Carla
  • DOMÉNECH CARBÓ, ANTONIO
[EN] A multi-technique strategy, including microscopy, spectroscopic and electrochemical techniques, is proposed to study thin corrosion layers that form on the surface of historic copper-based coins. An accurate characterisation of this external corrosion layer is important for selecting a suitable conservation and/or restoration treatment. For this purpose, a series of copper-based coins from different historical periods and provenances, which mainly exhibited atmospheric corrosion, was analysed. The morphology of the corrosion layer and the upper core of coins was studied in trenches done on coin surfaces with a focused ion beam gun, coupled to a field emission scanning electron microscope-X-ray microanalysis (FIB-FESEM-EDX). The X-ray microanalysis performed with FESEM-EDX on trenches allowed elemental composition profiles on the corrosion layer to be obtained. These results were complemented with the compositional data of the corrosion products provided by the voltammetry of immobilised microparticles (VIMP) and Fourier transform infrared spectroscopy (FTIR), and by studying visual appearance by optical microscopy and colorimetry. Cuprite and tenorite (the latter increased with coin age) were the main identified corrosion products, which were accompanied, to a lesser extent, by copper trihydroxychloride polymorphs. Interestingly, metal oxalates and metal-carboxylate complexes were identified on the corrosion layer of most coins. These unusual alteration products of copper-based coins were formed from the organic matter deposited on coin surfaces given their use when placed in circulation or by further manipulations of collectors., Financial support is gratefully acknowledged from the Spanish "R + D + I" project CTQ2017-85317-C2-1-P, CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2-P, which are supported by the Ministerio de Ciencia, Innovation y Universidades, Fondo Europeo de Desarrollo Regional (ERDF) funds and Agencia Estatal de Investigation (AEI). The authors wish to thank Mr. Manuel Planes, Dr. Jose Luis Moya and Mrs. Alicia Nuez Inbernon, technical supervisors of the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple-scan voltammetry and OCP: Archaeometric tools for dating archaeological bronzes

  • Doménech-Carbó, Antonio
  • Mödlinger, Marianne
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The application of a multiple-scan strategy to nanosamples taken from 18 cross-sections of Bronze Age arms and armour, as well as two Roman coins using two solid-state electrochemical techniques, the voltammetry of immobilized microparticles (VIMP) and open circuit potential measurements (OCP) is described. The voltammetric responses in contact with aqueous acetate buffer can be attributed to the reduction of cuprite with variable degree of compaction and crystallinity revealing significant differences in the gradient of such properties with depth. Such differences are also revealed by "dry" OCP measurements connecting points in the cross section near and separated from the corrosion layer. The voltammetric study of the metallographic samples of the bronze objects shows correlation with the age of the objects, respectively the period of their deposition. We discuss also (potential) influence of different factors on the VIMP and OCP measurements, such as deposition context (soil, water), chemical composition of the copper alloys, and microstructural features (ascast, annealed, work-hardened), and how to overcome these issues., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical analysis of gold embroidery threads from archeological textiles

  • Martínez, Betlem
  • Piquero-Cilla, Juan
  • Montoya, Noemí
  • DOMÉNECH CARBÓ, ANTONIO
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] A methodology for characterizing archeological gold embroidery threads based on two analytical techniques is described: Field emission scanning electron microscopy (FESEM-EDX) and voltammetry of immobilized microparticle (VIMP) methodologies. After the analysis of the chemical composition of the metallic foil, we analyze specific voltammetric features associated with the oxidation of gold in contact with aqueous H2SO4 and HCl electrolytes. Cyclic and square wave voltammetries (VMP) have been used to get information about the elemental composition and the corrosion products of the samples. AFM, FESEM-EDX, and FESEM-FIB-EDX methodologies complete the study and bring us closer to the composition of the alloys and the embroidery manufacture techniques. This technique actualizes the VIMP data and evidences the morphological and elemental differences between them; in particular, it is confirmed that Au-Ag-Cu alloys, with notably differences in Ag content depending on the provenance, were used., Projects CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2P, which are supported with Ministerio de Economia, Industria y Competitividad (MINECO), and Fondo Europeo de Desarrollo Regional (ERDF) funds, as well as project CTQ2017-85317-C2-1-P supported with funds from MINECO, ERDF, and Agencia Estatal de Investigacion (AEI), are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of traditional artificial patinas on copper using the voltammetry of immobilized particles

  • Doménech-Carbó, Antonio
  • Ramírez-Barat, Blanca
  • Petiti, Chiara
  • Goidianich, Sara
  • Cano, Emilio
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The voltammetry of immobilized particles methodology (VIMP) is used to characterize the composition of artificial patinas on copper. The voltammetric response of carbonate-, nitrate-, chloride-, sulfate-, and sulfide-based patinas is described using sub-microsamples attached to graphite electrodes in contact with aqueous acetate buffer. Patina-characteristic voltammetric profiles are obtained for the different artificial patinas that can be recognized using the generalized Tafel analysis of the voltammetric curves. VIMP data could also provide layer-by-layer information about composition and compactness/crystallinity of the patinas for which a simplified theoretical modeling is presented., Authors gratefully acknowledge funding from Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI); and project TOP-HERITAGE CM (S2018/NMT_4372) from Comunidad de Madrid and European Structural and Investment Funds. B. R.-B. and E.C. would like to professional support of the CSIC Interdisciplinary Thematic Platform "Open Heritage: Research and Society" (PTI-PAIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical Analysis of Catalytic and Oxygen Interfacial Transfer Effects on MnO2 Deposited on Gold Electrodes

  • Doménech Carbó, Antonio
  • Sabate-Fornons, Ferran
  • Sabater Picot, Mª José
[EN] A theoretical model for obtaining thermochemical and kinetic information on oxygen interfacial transfer in metal oxides deposited on gold electrodes, based in the voltammetry of immobilized particle methodology, is presented. It is applied to MnO2 microparticulate deposits on gold in contact with aqueous NaOH solution using the voltammetric signals for the oxidation of gold to gold oxide monolayer and its subsequent desorptive reduction. Assuming reversibility, voltammetric peak potentials permit to estimate a variation of Gibbs free energy of interfacial oxygen transfer of -32 +/- 3 kj mol(-1). Analysis of peak current data based on the Sharp-Hancock formalism of solid-state kinetics was consistent with the diffusive nature of the transfer process and permitted the separation between this effect and the catalytic effect exerted by MnO2 on the electrochemical oxidation of gold., Financial support by projects CTQ2014-53736-C3-2-P and CTQ2015-67592-P, which are supported with Ministerio de Economia, Industria y Competitividad (MINECO), and Fondo Europeo de Desarrollo Regional (ERDF) funds, and CTQ2017-85317-C2-1-P supported with funds from the MINECO, ERDF, and Agencia Estatal de Investigation (AEI) are gratefully acknowledged. F.S. acknowledges a PhD fellowship (Ayuda Predoctoral FPI Severo Ochoa) from MINECO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Composition and Color of Maya Blue: Reexamination of Literature Data Based On the Dehydroindigo Model

  • Doménech-Carbó, Antonio
  • Holmwood, Sigrid
  • Di Turo, Francesca
  • Montoya, Noemí
  • Valle-Algarra, Francisco Manuel
  • Edwards, Howell G.M.
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] An analysis of literature data studying the composition and color of Maya blue (MB) type materials prepared from indigo, dehydroindigo, and different aluminosilicates, accompanied by new spectral data, is presented. After thermal treatment at above 100 degrees C, indigo-based specimens displayed Raman and UV-vis spectroscopic features common to those of equivalent dehydroindigo-based replicants, thus supporting the socalled dehydroindigo model (J. Phys. Chem. B 2006, 110, 6027-6039) in which the dehydroindigo/indigo ratio, increasing with temperature, is crucial to determine the color of MB and its variability. The current analysis supports the view of MB as a polyfunctional hybrid material just characterized by the presence of different organic components, each one distributed in topological isomers differently attached to the clay support. On the basis of the comparison of spectral data for different channeled silicates (among others, palygorskite, sepiolite, and montmorillonite clays, and different zeolites), we proposed a view on the color characteristics of Maya blue-type specimens as defined by the compromise between trapping ability for indigo molecules and facility to promote the oxidation of indigo to dehydroindigo., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF), and Agencia Estatal de Investigacion (AEI) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Funerary colors in Pre-classical Maya culture: the red pigment in the 19th tomb of Rio Azul (Peten, Guatemala)

  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Osete Cortina, Laura|||0000-0003-0709-5885
  • Vázquez de Agredos-Pascual, María Luisa
  • Doménech-Carbó, Antonio
  • Guasch-Ferré, Nuria
  • Vidal-Lorenzo, Cristina
[EN] The pigments were important in the funerary customs of the ancient Maya. They could be introduced as an offering inside the tombs or burials, and were also used to wrap the dead bodies, as if it were a funeral shroud. In the tombs and burials of royalty and high social classes the use of pigments for this purpose is well documented, and physicochemical studies are focused on their identification. This scientific contribution shows the results obtained when analyzing two reddish pigmenting materials from the grave goods of the tomb 19 of the archaeological site of Rio Azul, (Guatemalan Department of Peten), using a multi-technique approach including microscopy, diffraction, spectroscopic, electrochemical and chromatographic techniques. The results have enabled the identification of the inorganic and organic materials composing these pigmenting materials found in a ceramic posthumous offering dish and further discussion mainly has been focused on the geological source of the inorganic materials and the possible origin of the organic matter accompanying these two pigmenting materials., Financial support is gratefully acknowledged from the Spanish "I + D+I MINECO" project CTQ2017-85317-C2-1-P, which is supported by the Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) funds and Agencia Estatal de Investigacion (AEI), the Universitat de Valencia project UV-INV-AE11-42990 and the Ministerio de Ciencia, Innovacion y Universidades I+D project PGC2018-098904-B-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dating of Archaeological Gold by Means of Solid State Electrochemistry

  • Doménech Carbó, Antonio
  • Scholz, Fritz
  • Piquero-Cilla, Juan
  • Montoya, Noemí
  • Pasies -Oviedo, Trinidad
  • Gozalbes, Manuel
  • Melchor Montserrat, José Manuel
  • Oliver, Arturo
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] In archaeology and history of art, age determination is a fundamental analytical problem. While several techniques for age determination of various materials, like radiocarbon dating, are established, these methods cannot be applied for metals, for which new techniques have to be developed. For the first time a dating method for archaeological gold objects is described which is based on a corrosion clock and electrochemical measurements, using the voltammetry of immobilized particles. Samples are prepared by one touch' with a graphite pencil, only transferring a few nanograms of the archaeological gold. The method has been calibrated with the help of a series of well-documented gold specimen from different prehistory museums covering the last 2600years. Our results prove that this corrosion clock is going on a constant pace, practically independent of the environment, making it most attractive for applications in archaeometry., Projects CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2-P, which are supported with Ministerio de Economia, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (ERDF) funds, as well as project CTQ2017-85317-C2-1-P supported with funds from, MINECO, ERDF and Agencia Estatal de Investigacion (AEI) are gratefully acknowledged. The authors also wish to thank Dr. Jose Luis Moya Lopez, Mrs. Alicia Nuez Inbernon and Mr. Manuel Planes Insausti (Microscopy Service of the Universitat Politecnica de Valencia) and M. Teresa Minguez and Clara Yebenes (Seccion de Microscopia del SCSIE, Universitat deValencia) for technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical assessment of pigments-binding medium interactions in oil paint deterioration: a case study on indigo and Prussian blue

  • Doménech-Carbó, Antonio
  • Donnici, Margherita
  • Guasch-Ferré, Núria
  • Gasol-Fargas, Rosa M.
  • Iglesias-Campos, Manuel Ángel
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Osete Cortina, Laura|||0000-0003-0709-5885
[EN] The degradation of laboratory oil paint film specimens containing indigo and Prussian blue pigments and pictorial samples from the Sant Francesc de Paula painting exhibited in the Tomas Balvey Arxiu Museum (Cardedeu (Catalonia), Spain) has been studied by voltammetry of immobilized particles. This technique, combined with light microscopy, scanning electron microscopy-energy dispersive X-ray analysis, nanoindentation-atomic force microscopy, attenuated total reflectance-Fourier-transform infrared spectroscopy and gas chromatography-mass spectroscopy techniques permits the proposal of a dual scheme for the degradation of the pigments when naturally aged and submitted to accelerated UVA aging. Under conditions of moderate temperature, humidity and natural illumination, and low gradients of these parameters, Prussian blue acts as a radical scavenger moderating the production of reactive oxygen species produced in the oil binding medium by the action of ultraviolet radiation, resulting in the formation, in the solid state, of the solid-solution, {KFeIII[Fe-II(CN)(6)]}(x){Fe-III[Fe-III(CN)(6)]}(1-x), known as Berlin green, which then promotes the formation of indigo adducts with radicals. In several localized areas of the Sant Francesc de Paula paint showing strong degradation, Prussian blue acts as a promoter of the indigo oxidation to isatin, thus resulting in a considerable chromatic shift., Financial support was received from the MINECO Project CTQ2017-85317-C2-1-P which is supported with Ministerio de Economia, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cation and anion electrochemically assisted solid-state transformations of malachite green

  • Doménech-Carbó, Antonio
  • Dias, Daiane
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The possibility of the electrochemical promotion of different solid-to-solid transformations including the performance of successive cation and anion insertion processes has been tested using malachite green, a triphenylmethane dye, in contact with aqueous NaCl electrolyte. Electrochemical data using the voltammetry of microparticles methodology reveal significant differences with the solution phase electrochemistry of the dye. Voltammetric data, combined with atomic force microscopy, focusing ion beam-field emission scanning electron microscopy, and high-resolution field emission scanning electron microscopy permit characterization of the oxidative dissolution, oxidation with anion insertion, reduction with cation insertion and reduction with anion issue processes, whose thermochemical aspects, involving separate ion and electron transport contributions, are discussed., Financial support from the Project CTQ2017-85317-C2-1-P (Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI)), is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aplicación de la técnica de microscopía electrónica por emisión de campo con haz de iones focalizado en el estudio del patrimonio cultural: cerámica arqueológica y fotografía histórica

  • Domenech Carbo, Antonio
  • Mai Cerovaz, Carolina
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[ES] Este trabajo nace a partir del interés por profundizar en el conocimiento y exploración de las capacidades de los distintos métodos de análisis de patrimonio cultural basados en técnicas nano invasivas (ng). La instrumentación de microscopía basada en la tecnología de haz de iones enfocado (FIB) ha ampliado notablemente el alcance de las aplicaciones industriales en el análisis de superficie de materiales en las últimas décadas. Sin embargo, esta técnica apenas se ha aplicado en el examen y análisis del patrimonio cultural. En este estudio se exponen los resultados obtenidos en la adaptación del sistema FIB con un microscopio electrónico de barrido de emisión de campo convencional microanálisis de rayos X (FESEM-EDX) como una metodología de análisis de superficie aplicada al estudio de cerámica vidriada y a los procesos fotográficos históricos., [EN] This work is born from the interest to deepen knowledge and explore capabilities of the different methods of analysis on cultural heritage based on nanoinvasive techniques (ng). Microscopy instrumentation based on focused ion beam (FIB) technology has significantly expanded the scope of industrial applications for material surface analysis in recent decades. However, this technique has scarcely been applied in the examination and analysis of cultural heritage. This study sets out the results obtained in adapting the FIB system with a conventional X-ray micro-analysis (FESEMEDX) field emission scanning electron microscope as a surface analysis methodology applied to the glazed ceramic study and historical photographic processes., La presente investigación está financiada con los proyectos I+D: CTQ2017-85317-C2-1-P cofinanciado por el Ministerio de Ciencia Innovación y Universidades, el Fondo Europeo de Desarrollo Regional (ERDF) y la Agencia Estatal de Investigación (AEI). Los autores agradecen la colaboración de Manuel Planes, José Luis Moya y Alicia Nuez, técnicos del Servicio de Microscopía Electrónica de la Universitat Politècnica de València. Los autores desean expresar su agradecimiento a Josep Pérez, Director del Museo de Cerámica de Manises que ha facilitado el fragmento de cerámica objeto de estudio.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Independent friction-restitution modeling of two-disk collisions

  • Domenech Carbó, Antonio
  • Montagna, Elena
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The oblique collisions between two axisymmetric disks moving on a flat horizontal surface are described in terms of impact modeling based on the assumption that normal and tangential restitution mechanisms operate independently of friction. Describing these mechanisms in terms of the usual Coulomb formulation, the model allows for an interpretation of some ¿anomalous¿ experimental data reported in the literature. These experimental data, corresponding to the variation of the coefficients of friction and tangential restitution with the impact angle, remained unexplained in classic formulations, are understood within the framework of the independent friction-restitution closure. Experimental data for metallic coins are in agreement with that formulation, including rolling friction effects., Financial support was received from the MINECO Project CTQ2017-85317-C2-1-P which is supported with Ministerio de Economia, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (ERDF).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of a gelatin-based adhesive for historic paintings that incorporates citronella oil as an eco-friendly biocide

  • Lee, Yu
  • Martín-Sánchez, Inés
  • Bolivar-Galiano, Fernando
  • Martín Rey, Susana|||0000-0002-2592-7377
  • Osete Cortina, Laura|||0000-0003-0709-5885
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The presented study focuses on evaluating the efficiency of a gelatin-based product that incorporates a plasticizer (glycerol) and a biocide (citronella oil), proposed as an eco-friendly adhesive for polychrome decoration applied in different parts of the architectural complex of the Longshan Temple in Lukang (eighteenth century, Taiwan). Seven laboratory physico-chemical tests were performed: (a) viscosity measurement; (b) drying curves; (c) moisture content determination; (d) water vapor permeability test; (e) mechanical test; (f) adhesion test; (g) susceptibility to fungi colonization test, which provide information on the workability, water content and water barrier properties, as well as mechanical, adhesion, and the biocide properties of the proposed product. The obtained results indicate that the workability, mechanical and adhesive properties of the new adhesive are adequate. Permeability in polychromies is slightly reduced due to the additional barrier effect of the adhesive incorporated into the paint film. The efficiency of citronella oil for preventing the growth of fungus Aspergillus niger on paintings consolidated with the adhesive was also probed. In parallel to these laboratory trials, the micro-invasive tests carried out, using nanoindentation combined with atomic force microscopy (NI-AFM), provided direct evidence for the improvement in the mechanical properties induced by applying the new adhesive to the original polychromies., This work was supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Fondo Europeo de Desarrollo Regional (ERDF), and the Agencia Estatal de Investigacion (AEI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FIB-FESEM and EMPA results on Antoninianus silver coins for manufacturing and corrosion processes

  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Di Turo, Francesca
  • Montoya, Noemi
  • Catalli, Fiorenzo
  • DOMÉNECH CARBÓ, ANTONIO
  • De Vito, Caterina
[EN] A set of ancient Antoninianus silver coins, dating back between 249 and 274¿A.D. and minted in Rome, Galliae, Orient and Ticinum, have been characterized. We use, for the first time, a combination of nano-invasive (focused ion beam-field emission scanning electron microscopy-X-ray microanalysis (FIB-FESEM-EDX), voltammetry of microparticles (VIMP)) and destructive techniques (scanning electron microscopy (SEM-EDX) and electron microprobe analysis (EMPA)) along with non-invasive, i.e., micro-Raman spectroscopy. The results revealed that, contrary to the extended belief, a complex Ag-Cu-Pb-Sn alloy was used. The use of alloys was common in the flourishing years of the Roman Empire. In the prosperous periods, Romans produced Ag-Cu alloys with relatively high silver content for the manufacture of both the external layers and inner nucleus of coins. This study also revealed that, although surface silvering processes were applied in different periods of crisis under the reign of Antoninii, even during crisis, Romans produced Antoninianus of high quality. Moreover, a first attempt to improve the silvering procedure using Hg-Ag amalgam has been identified., Financial support was provided by Sapienza University of Rome (Ateneo funding, 2014 15) and Spanish projects CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2-P, which are supported with Ministerio de Economía, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (ERDF) funds, as well as project CTQ2017-85317-C2-1-P supported with funds from, MINECO, ERDF and Agencia Estatal de Investigación (AEI). PhD grants of the Department of Earth Sciences, Sapienza University of Rome, are gratefully acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple-scan voltammetry of immobilized particles of ancient copper/bronze coins

  • Domenech Carbo, Antonio
  • Donnici, Margherita
  • Álvarez-Romero, Carla
  • Daniele, Salvatore
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The application of a multiple-scan strategy to study the structure of the corrosion patina of copper/bronze ancient objects using the voltammetry of immobilized microparticles (VIMP) is described. Upon nanosample attachment to graphite electrodes in contact with aqueous acetate buffer, voltammetric signatures characterizing cuprite with variable degree of crystallinity are recorded by means of successive cathodic scans reflecting the composition of the corrosion patina. The reported methodology, complemented with ion beam-field emission scanning electron microscopy (FIB-FESEM) and high-resolution field emission scanning electron microscopy (HRFESM-EDX), is applied to a set of coins fabricated between 1709 and 1962 revealing different corrosion patterns., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged. The authors wish to thank Mr. Manuel Planes, Dr. Jose Luis Moya and Alicia Nuez Imbernon technical supervisors of the Electron Microscopy Service of the Polytechnical University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical identification of painters/workshops: The case of Valencian Renaissance-Baroque painters (ca. 1550- ca. 1670)

  • Doménech Carbó, Antonio
  • Castelló Palacios, Amparo
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Guerola Blay, Vicente|||0000-0001-5223-7737
  • Pérez-Marín, Eva|||0000-0003-3201-8451
[EN] The voltammetry of immobilized particles (VIMP) methodology was applied to discriminate the oil painting production of a series of seven painters/workshops that worked in Valencia (Spain) between ca. 1530 and ca. 1650. When submicrosamples used for cross-section FESEM/EDX analysis were attached to graphite electrodes in contact with aqueous acetate buffer, well-defined responses were obtained. The reductive processes of lead pigments (lead white and lead-tin yellow) overlapped those associated to the lead soaps and other species resulting from the pigment-oil binder interaction in the sample. Such responses, which are theoretically modeled, were sensitive to changes in paint type and dose and thus provided a painter/workshop-characteristic voltammetric response defining a usable electrochemical fingerprint for authorship assessments. (C) 2018 Elsevier Ltd. All rights reserved., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged. The authors wish also to thank Mr. Manuel Planes and Dr. Jose Luis Moya, technical supervisors of the Electron Microscopy Service of the Universitat Politecnica de Valencia.