Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 22
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Screening of Iberian Coinage in the 2(th)-1(th) BCE Period Using the Voltammetry of Immobilized Particles

  • Doménech-Carbó, Antonio
  • Álvarez-Romero, Carla
  • Pasíes, Trinidad
  • Buendía, Milagros
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The voltammetry of immobilized particles (VIMP) was applied for grouping a series of 86 Iberian coins nominally minted in the cities of Iltirta, Castulo and Obulco in the 2(th)-1(th) BCE period for which there are no chronological data. Using characteristic signatures for the reduction of cuprite, tenorite and lead corrosion products in the patina of the coins, voltammetric grouping of coins was proposed. Voltammetric data were found to be consistent with textural and compositional properties of the surface and subsurface of selected coins using FIB-FESEM-EDX. The obtained data confirmed a clear separation between the productions of Iltirta on one side, and those of Castulo and Obulco on the other side, indicating the possibility to establish a rough chronology for these productions., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged. The authors wish also to thank Mr. Manuel Planes and Dr. Jose Luis Moya, technical supervisors of the Electron Microscopy Service of the Universitat Politecnica de Valencia. Thanks to Manuel Gozalbes for his technical assistance in the numismatic domain and Gonzalo Cores and the Museu de Prehistrica de Valencia for facilitating the access to its collections.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solid-state electrochemical characterization of emissions and authorities producing Roman brass coins

  • Di Fazio, Melania
  • Felici, Anna Candida
  • Catalli, Fiorenzo
  • De Vito, Caterina
  • Doménech-Carbó, Antonio
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The voltammetry of immobilized particles (VIMP) is applied to describe the solid state electrochemistry of brass. This methodology, which involves sampling at the nanogram level, is applied to discriminate mints/authorities producing different Roman monetary emissions covering since the Republic (88 BCE) to Domitianus (55-96 CE) Upon attachment to graphite electrodes in contact with aqueous acetate buffer at pH 4.75, well defined voltarnmetric responses were obtained centered on Cu- and Zn-localized signals whose intensity can be correlated to EMP data, being sensitive to the contents of Zn (15-30 wt.%) and Sn (0.01-1.1 wt.%). Voltammetric data, combined with ATR-FTIR and FIB-PESEM/EDS, yield information on the structure of the metal patina and permit to characterize different monetary emissions being able, in the case of Augustus' sestertii, to discriminate between the productions from different monetary authorities., Financial support is gratefully acknowledged from the Spanish "R + D +I" project CTQ2017-85317-C2-1-P, CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2-P, which are supported by the Ministerio de Glenda, Innovacion y Universidades, Fondo Europeo de Desarrollo Regional (ERDF) funds and Agenda Estatal de Investigacion (AEI). The authors wish to thank Mr. Manuel Planes, Dr. Jose Luis Moya and Mrs. Alicia Nuez Inberrion, technical supervisors of the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Discrimination and Provenances of Phoenician Red Slip Ware Using both the Solid State Electrochemistry and Petrographic Analyses

  • Fabrizi, Lucilla
  • Nigro, Lorenzo
  • Cappella, Federico
  • Spagnoli, Federica
  • Guirguis, Michele
  • Niveau de Villedary-Mariñas, Ana Maria
  • de Vito, Caterina
  • Doménech Carbó, Antonio
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] Solid state electrochemistry based on the voltammetry of immobilized microparticles (VIMP) methodology is applied to a series of 80 Phoenician Red Slip samples from the archaeological sites of Motya (Sicily, Italy), Mogador (Morocco), Ramat-Rahel (Israel), Sulky (Sardinia, Italy), Tas Silg (Malta), Pantelleria (Italy), and Cadiz (Spain), dated from the 8(th) to the 6(th) century BC. Upon attachment of sub-microsamples to graphite electrodes in contact with aqueous H2SO4 electrolyte, voltammetric features due to the reduction of Fe(III) minerals and the oxidation of Fe(II) ones, complemented with electrocatalytic effects on oxygen reduction and oxygen evolution reactions, provide characteristic electrochemical fingerprints for pottery samples. A consistent sample grouping discriminating between different potteries from different archaelogical sites, is obtained, all results being consistent with morphological, compositional and mineralogical data. Petrographic analysis supports the grouping, defining the manufacture and firing procedure for the different archaeological context., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged. We are grateful to the Sapienza University of Rome fund for Great Excavations for supporting the project on the island of Motya which contributed to this study, as well as the Superintendency of Trapani of the Sicilian Region and G. Whitaker Foundation for providing support to the research. Financial support was provided by Sapienza University of Rome (Ateneo funding, 2016, 17, 18) and Ministero dell'Istruzione, dell'Universita e della Ricerca (funding FFABR 2017). PhD grants of the Department of Earth Sciences, Sapienza University of Rome, are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microchemical surface analysis of historic copper-based coins by the combined use of FIB-FESEM-EDX, OM, FTIR spectroscopy and solid-state electrochemical techniques

  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Osete Cortina, Laura|||0000-0003-0709-5885
  • Martínez Bazán, Mª Luisa
  • Álvarez-Romero, Carla
  • DOMÉNECH CARBÓ, ANTONIO
[EN] A multi-technique strategy, including microscopy, spectroscopic and electrochemical techniques, is proposed to study thin corrosion layers that form on the surface of historic copper-based coins. An accurate characterisation of this external corrosion layer is important for selecting a suitable conservation and/or restoration treatment. For this purpose, a series of copper-based coins from different historical periods and provenances, which mainly exhibited atmospheric corrosion, was analysed. The morphology of the corrosion layer and the upper core of coins was studied in trenches done on coin surfaces with a focused ion beam gun, coupled to a field emission scanning electron microscope-X-ray microanalysis (FIB-FESEM-EDX). The X-ray microanalysis performed with FESEM-EDX on trenches allowed elemental composition profiles on the corrosion layer to be obtained. These results were complemented with the compositional data of the corrosion products provided by the voltammetry of immobilised microparticles (VIMP) and Fourier transform infrared spectroscopy (FTIR), and by studying visual appearance by optical microscopy and colorimetry. Cuprite and tenorite (the latter increased with coin age) were the main identified corrosion products, which were accompanied, to a lesser extent, by copper trihydroxychloride polymorphs. Interestingly, metal oxalates and metal-carboxylate complexes were identified on the corrosion layer of most coins. These unusual alteration products of copper-based coins were formed from the organic matter deposited on coin surfaces given their use when placed in circulation or by further manipulations of collectors., Financial support is gratefully acknowledged from the Spanish "R + D + I" project CTQ2017-85317-C2-1-P, CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2-P, which are supported by the Ministerio de Ciencia, Innovation y Universidades, Fondo Europeo de Desarrollo Regional (ERDF) funds and Agencia Estatal de Investigation (AEI). The authors wish to thank Mr. Manuel Planes, Dr. Jose Luis Moya and Mrs. Alicia Nuez Inbernon, technical supervisors of the Electron Microscopy Service of the Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple-scan voltammetry and OCP: Archaeometric tools for dating archaeological bronzes

  • Doménech-Carbó, Antonio
  • Mödlinger, Marianne
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The application of a multiple-scan strategy to nanosamples taken from 18 cross-sections of Bronze Age arms and armour, as well as two Roman coins using two solid-state electrochemical techniques, the voltammetry of immobilized microparticles (VIMP) and open circuit potential measurements (OCP) is described. The voltammetric responses in contact with aqueous acetate buffer can be attributed to the reduction of cuprite with variable degree of compaction and crystallinity revealing significant differences in the gradient of such properties with depth. Such differences are also revealed by "dry" OCP measurements connecting points in the cross section near and separated from the corrosion layer. The voltammetric study of the metallographic samples of the bronze objects shows correlation with the age of the objects, respectively the period of their deposition. We discuss also (potential) influence of different factors on the VIMP and OCP measurements, such as deposition context (soil, water), chemical composition of the copper alloys, and microstructural features (ascast, annealed, work-hardened), and how to overcome these issues., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical analysis of gold embroidery threads from archeological textiles

  • Martínez, Betlem
  • Piquero-Cilla, Juan
  • Montoya, Noemí
  • DOMÉNECH CARBÓ, ANTONIO
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] A methodology for characterizing archeological gold embroidery threads based on two analytical techniques is described: Field emission scanning electron microscopy (FESEM-EDX) and voltammetry of immobilized microparticle (VIMP) methodologies. After the analysis of the chemical composition of the metallic foil, we analyze specific voltammetric features associated with the oxidation of gold in contact with aqueous H2SO4 and HCl electrolytes. Cyclic and square wave voltammetries (VMP) have been used to get information about the elemental composition and the corrosion products of the samples. AFM, FESEM-EDX, and FESEM-FIB-EDX methodologies complete the study and bring us closer to the composition of the alloys and the embroidery manufacture techniques. This technique actualizes the VIMP data and evidences the morphological and elemental differences between them; in particular, it is confirmed that Au-Ag-Cu alloys, with notably differences in Ag content depending on the provenance, were used., Projects CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2P, which are supported with Ministerio de Economia, Industria y Competitividad (MINECO), and Fondo Europeo de Desarrollo Regional (ERDF) funds, as well as project CTQ2017-85317-C2-1-P supported with funds from MINECO, ERDF, and Agencia Estatal de Investigacion (AEI), are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of traditional artificial patinas on copper using the voltammetry of immobilized particles

  • Doménech-Carbó, Antonio
  • Ramírez-Barat, Blanca
  • Petiti, Chiara
  • Goidianich, Sara
  • Cano, Emilio
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The voltammetry of immobilized particles methodology (VIMP) is used to characterize the composition of artificial patinas on copper. The voltammetric response of carbonate-, nitrate-, chloride-, sulfate-, and sulfide-based patinas is described using sub-microsamples attached to graphite electrodes in contact with aqueous acetate buffer. Patina-characteristic voltammetric profiles are obtained for the different artificial patinas that can be recognized using the generalized Tafel analysis of the voltammetric curves. VIMP data could also provide layer-by-layer information about composition and compactness/crystallinity of the patinas for which a simplified theoretical modeling is presented., Authors gratefully acknowledge funding from Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI); and project TOP-HERITAGE CM (S2018/NMT_4372) from Comunidad de Madrid and European Structural and Investment Funds. B. R.-B. and E.C. would like to professional support of the CSIC Interdisciplinary Thematic Platform "Open Heritage: Research and Society" (PTI-PAIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

DESARROLLO DE MÉTODOS DE CARACTERIZACIÓN Y CONTROL DE TRATAMIENTOS DE CONSERVACIÓN DE COLECCIONES NUMISMÁTICAS MEDIANTE TÉCNICAS DE MICROSCOPÍA ELECTRÓNICA Y NANOELECTROQUÍMICA

  • Álvarez Romero, Carla
[ES] Las piezas numismáticas constituyen un importante porcentaje de las colecciones de los museos y una de las evidencias que con mayor frecuencia se encuentra en las excavaciones, tratándose de vestigios arqueológicos e históricos fundamentales para el estudio de diferentes aspectos de las sociedades pasadas. Para la investigación y la caracterización de estos materiales es necesario el empleo de técnicas analíticas no invasivas o nanoinvasivas que no comprometan la integridad de las monedas. En este trabajo se presentan los resultados obtenidos en la exploración de las capacidades de dos técnicas instrumentales analíticas, VIMP y FIB-FESEM-EDX, ambas de carácter nanoinvasivo, en colecciones numismáticas fabricadas en aleaciones en base cobre, escasamente empleadas en el estudio de patrimonio metálico hasta la fecha. Además, y en cada caso de estudio abordado, se han diseñado estrategias multitécnica que incluye el uso de SEM-EDX, espectroscopia FTIR, M.O., colorimetría y espectroscopia Raman. En una primera parte de la investigación se han desarrollado metodologías analíticas para la identificación y discriminación de aleaciones, productos de corrosión e intervenciones previas en tres colecciones de distinta titularidad y procedentes de diferentes ambientes. La primera colección, procede de un ambiente aéreo o atmosférico y es de titularidad privada, la colección Doménech-Francés. La segunda colección, procede de un ambiente de enterramiento y pertenece al Museu de Prehistòria de València. La última colección estudiada con esta finalidad procede de un ambiente subacuático, y pertenece al Museo Nacional de Arqueología Subacuática. En la segunda parte, el trabajo se centra en el desarrollo de una metodología innovadora basada en la técnica de electroquímica en estado sólido VIMP, que permite la discriminación entre cecas y el conocimiento de las técnicas de acuñación empleadas. Esta nueva metodología se ha implementado sobre dos casos de estudio diferentes: el primero consiste en una serie de maravedís acuñados entre 1661 y 1664 por Felipe IV, y el segundo, en una colección de monedas íberas acuñadas en las cecas de Cástulo, Obulco e Iltirta entre los siglos II y I a.C., pertenecientes al Museu de Prehistòria de València., [CA] Las peces numismàtiques constitueixen un important percentatge de les col·leccions dels museus i una de les evidències que amb major freqüència es troba en les excavacions, i es tracta de vestigis arqueològics i històrics fonamentals per a l'estudi de diferents aspectes de les societats passades. Per a la investigació i la caracterització d'aquests materials és necessari l'ús de tècniques analítiques no invasives o nanoinvasives, que no comprometen la integritat de les monedes. En aquest treball es presenten els resultats obtinguts en l'exploració de les capacitats de dues tècniques instrumentals analítiques, VIMP i FIB-FESEM-EDX, ambdues de caràcter nanoinvasiu, en col·leccions numismàtiques fabricades en aliatges amb base de coure, escassament emprades en l'estudi del patrimoni metàl·lic fins avui. A més, en cada cas d'estudi abordat, s'han dissenyat estratègies multitècnica que inclouen l'ús de SEM-EDX, espectroscòpia FTIR, M.O., colorimetria i espectroscòpia Raman. En una primera part de la investigació s'han desenvolupat metodologies analítiques per a la identificació i discriminació d'aliatges, productes de corrosió i intervencions prèvies en tres col·leccions de diferent titularitat i procedents de diferents ambients. La primera col·lecció, procedeix d'un ambient aeri o atmosfèric i és de titularitat privada, la col·lecció Doménech-Francés. La segona col·lecció procedeix d'un ambient d'enterrament i pertany al Museu de Prehistòria de València. La última col·lecció estudiada amb aquesta finalitat procedeix d'un ambient subaqüàtic i pertany al Museu Nacional d'Arqueologia Subaqüàtica. En la segona part, el treball se centra en el desenvolupament d'una metodologia innovadora basada en la tècnica d'electroquímica en estat sòlid VIMP, que permet la discriminació entre seques i el coneixement de les tècniques d'encunyació emprades. Aquesta nova metodologia s'ha implementat sobre dos casos d'estudi diferents: el primer consisteix en una sèrie de maravedís encunyats entre el 1661 i el 1664 per Felip IV; i el segon, en una col·lecció de monedes iberes encunyades a les seques de Cástulo, Obulco i Iltirta entre els segles II i I a. de C., pertanyents al Museu de Prehistòria de València., [EN] The numismatic pieces constitute an important part of the collections of the museums and one of the evidences that more frequently found in the excavations, being archaeological and historical vestiges fundamental for the study of severe aspects of the past societies. The use of non-invasive or nanoinvasive analytical techniques that do not compromise the integrity of the coins is essential for the investigation and characterization of these materials. This PhD presents the results obtained in the exploration of the capabilities of two nanoinvasive analytical instrumental techniques, VIMP and FIB-FESEM-EDX, in numismatic collections made of copper-based alloys, scarcely used in the study of heritage metallic so far. In addition, and in each study case discussed, multi-technical strategies have been designed that include the use of SEM-EDX, FTIR spectroscopy, O.M., colorimetry and Raman spectroscopy. In the first part of the investigation, analytical methodologies for the identification and discrimination of alloys, corrosion products and previous interventions in three collections of different ownership and coming from different environments have been developed. The first collection, comes from an air or atmospheric environment, is privately owned, the Doménech-Francés collection, the second collection, comes from a burial environment and belongs to the Museum of Prehistory of Valencia, and the last collection studied for this purpose, comes from an underwater environment and belongs to the National Museum of Underwater Archaeology. In the second part, the work focuses on the development of an innovate methodology based on the technique of solid-state electrochemistry VIMP that allows the discrimination between mints and the knowledge of the coinage techniques used. This new methodology has been implemented on two different case studies: the first consists of a series of maravedís coined between 1661 and 1664 by Philip IV, and the second, in a collection of iberian coins minted in the mints of Cástulo, Obulco and Iltirta between the 2nd and 1st centuries BC, and belonging to the Museum of Prehistory of Valencia., Agradecer todo el apoyo institucional que he tenido: al contrato FPI del Ministerio de Economía, Industria y Competitividad del que he podido disfrutar durante estos cuatro años (referencia de la ayuda BES-2015-072439) enmarcado dentro de los proyectos CTQ2014-53736- C3-1-P y CTQ2014-53736-C3-2-P, al proyecto CTQ2017-85317-C2-1-P, del Ministerio de Ciencia, Innovación y Universidades y cofinanciado por el Fondo Europeo de Desarrollo Regional (ERDF) y la Agencia Estatal de Investigación (AEI)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical Analysis of Catalytic and Oxygen Interfacial Transfer Effects on MnO2 Deposited on Gold Electrodes

  • Doménech Carbó, Antonio
  • Sabate-Fornons, Ferran
  • Sabater Picot, Mª José
[EN] A theoretical model for obtaining thermochemical and kinetic information on oxygen interfacial transfer in metal oxides deposited on gold electrodes, based in the voltammetry of immobilized particle methodology, is presented. It is applied to MnO2 microparticulate deposits on gold in contact with aqueous NaOH solution using the voltammetric signals for the oxidation of gold to gold oxide monolayer and its subsequent desorptive reduction. Assuming reversibility, voltammetric peak potentials permit to estimate a variation of Gibbs free energy of interfacial oxygen transfer of -32 +/- 3 kj mol(-1). Analysis of peak current data based on the Sharp-Hancock formalism of solid-state kinetics was consistent with the diffusive nature of the transfer process and permitted the separation between this effect and the catalytic effect exerted by MnO2 on the electrochemical oxidation of gold., Financial support by projects CTQ2014-53736-C3-2-P and CTQ2015-67592-P, which are supported with Ministerio de Economia, Industria y Competitividad (MINECO), and Fondo Europeo de Desarrollo Regional (ERDF) funds, and CTQ2017-85317-C2-1-P supported with funds from the MINECO, ERDF, and Agencia Estatal de Investigation (AEI) are gratefully acknowledged. F.S. acknowledges a PhD fellowship (Ayuda Predoctoral FPI Severo Ochoa) from MINECO.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Composition and Color of Maya Blue: Reexamination of Literature Data Based On the Dehydroindigo Model

  • Doménech-Carbó, Antonio
  • Holmwood, Sigrid
  • Di Turo, Francesca
  • Montoya, Noemí
  • Valle-Algarra, Francisco Manuel
  • Edwards, Howell G.M.
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] An analysis of literature data studying the composition and color of Maya blue (MB) type materials prepared from indigo, dehydroindigo, and different aluminosilicates, accompanied by new spectral data, is presented. After thermal treatment at above 100 degrees C, indigo-based specimens displayed Raman and UV-vis spectroscopic features common to those of equivalent dehydroindigo-based replicants, thus supporting the socalled dehydroindigo model (J. Phys. Chem. B 2006, 110, 6027-6039) in which the dehydroindigo/indigo ratio, increasing with temperature, is crucial to determine the color of MB and its variability. The current analysis supports the view of MB as a polyfunctional hybrid material just characterized by the presence of different organic components, each one distributed in topological isomers differently attached to the clay support. On the basis of the comparison of spectral data for different channeled silicates (among others, palygorskite, sepiolite, and montmorillonite clays, and different zeolites), we proposed a view on the color characteristics of Maya blue-type specimens as defined by the compromise between trapping ability for indigo molecules and facility to promote the oxidation of indigo to dehydroindigo., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF), and Agencia Estatal de Investigacion (AEI) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Funerary colors in Pre-classical Maya culture: the red pigment in the 19th tomb of Rio Azul (Peten, Guatemala)

  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Osete Cortina, Laura|||0000-0003-0709-5885
  • Vázquez de Agredos-Pascual, María Luisa
  • Doménech-Carbó, Antonio
  • Guasch-Ferré, Nuria
  • Vidal-Lorenzo, Cristina
[EN] The pigments were important in the funerary customs of the ancient Maya. They could be introduced as an offering inside the tombs or burials, and were also used to wrap the dead bodies, as if it were a funeral shroud. In the tombs and burials of royalty and high social classes the use of pigments for this purpose is well documented, and physicochemical studies are focused on their identification. This scientific contribution shows the results obtained when analyzing two reddish pigmenting materials from the grave goods of the tomb 19 of the archaeological site of Rio Azul, (Guatemalan Department of Peten), using a multi-technique approach including microscopy, diffraction, spectroscopic, electrochemical and chromatographic techniques. The results have enabled the identification of the inorganic and organic materials composing these pigmenting materials found in a ceramic posthumous offering dish and further discussion mainly has been focused on the geological source of the inorganic materials and the possible origin of the organic matter accompanying these two pigmenting materials., Financial support is gratefully acknowledged from the Spanish "I + D+I MINECO" project CTQ2017-85317-C2-1-P, which is supported by the Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) funds and Agencia Estatal de Investigacion (AEI), the Universitat de Valencia project UV-INV-AE11-42990 and the Ministerio de Ciencia, Innovacion y Universidades I+D project PGC2018-098904-B-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dating of Archaeological Gold by Means of Solid State Electrochemistry

  • Doménech Carbó, Antonio
  • Scholz, Fritz
  • Piquero-Cilla, Juan
  • Montoya, Noemí
  • Pasies -Oviedo, Trinidad
  • Gozalbes, Manuel
  • Melchor Montserrat, José Manuel
  • Oliver, Arturo
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] In archaeology and history of art, age determination is a fundamental analytical problem. While several techniques for age determination of various materials, like radiocarbon dating, are established, these methods cannot be applied for metals, for which new techniques have to be developed. For the first time a dating method for archaeological gold objects is described which is based on a corrosion clock and electrochemical measurements, using the voltammetry of immobilized particles. Samples are prepared by one touch' with a graphite pencil, only transferring a few nanograms of the archaeological gold. The method has been calibrated with the help of a series of well-documented gold specimen from different prehistory museums covering the last 2600years. Our results prove that this corrosion clock is going on a constant pace, practically independent of the environment, making it most attractive for applications in archaeometry., Projects CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2-P, which are supported with Ministerio de Economia, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (ERDF) funds, as well as project CTQ2017-85317-C2-1-P supported with funds from, MINECO, ERDF and Agencia Estatal de Investigacion (AEI) are gratefully acknowledged. The authors also wish to thank Dr. Jose Luis Moya Lopez, Mrs. Alicia Nuez Inbernon and Mr. Manuel Planes Insausti (Microscopy Service of the Universitat Politecnica de Valencia) and M. Teresa Minguez and Clara Yebenes (Seccion de Microscopia del SCSIE, Universitat deValencia) for technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical assessment of pigments-binding medium interactions in oil paint deterioration: a case study on indigo and Prussian blue

  • Doménech-Carbó, Antonio
  • Donnici, Margherita
  • Guasch-Ferré, Núria
  • Gasol-Fargas, Rosa M.
  • Iglesias-Campos, Manuel Ángel
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Osete Cortina, Laura|||0000-0003-0709-5885
[EN] The degradation of laboratory oil paint film specimens containing indigo and Prussian blue pigments and pictorial samples from the Sant Francesc de Paula painting exhibited in the Tomas Balvey Arxiu Museum (Cardedeu (Catalonia), Spain) has been studied by voltammetry of immobilized particles. This technique, combined with light microscopy, scanning electron microscopy-energy dispersive X-ray analysis, nanoindentation-atomic force microscopy, attenuated total reflectance-Fourier-transform infrared spectroscopy and gas chromatography-mass spectroscopy techniques permits the proposal of a dual scheme for the degradation of the pigments when naturally aged and submitted to accelerated UVA aging. Under conditions of moderate temperature, humidity and natural illumination, and low gradients of these parameters, Prussian blue acts as a radical scavenger moderating the production of reactive oxygen species produced in the oil binding medium by the action of ultraviolet radiation, resulting in the formation, in the solid state, of the solid-solution, {KFeIII[Fe-II(CN)(6)]}(x){Fe-III[Fe-III(CN)(6)]}(1-x), known as Berlin green, which then promotes the formation of indigo adducts with radicals. In several localized areas of the Sant Francesc de Paula paint showing strong degradation, Prussian blue acts as a promoter of the indigo oxidation to isatin, thus resulting in a considerable chromatic shift., Financial support was received from the MINECO Project CTQ2017-85317-C2-1-P which is supported with Ministerio de Economia, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cation and anion electrochemically assisted solid-state transformations of malachite green

  • Doménech-Carbó, Antonio
  • Dias, Daiane
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The possibility of the electrochemical promotion of different solid-to-solid transformations including the performance of successive cation and anion insertion processes has been tested using malachite green, a triphenylmethane dye, in contact with aqueous NaCl electrolyte. Electrochemical data using the voltammetry of microparticles methodology reveal significant differences with the solution phase electrochemistry of the dye. Voltammetric data, combined with atomic force microscopy, focusing ion beam-field emission scanning electron microscopy, and high-resolution field emission scanning electron microscopy permit characterization of the oxidative dissolution, oxidation with anion insertion, reduction with cation insertion and reduction with anion issue processes, whose thermochemical aspects, involving separate ion and electron transport contributions, are discussed., Financial support from the Project CTQ2017-85317-C2-1-P (Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI)), is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Exploración de las capacidades FIB-FESEM-EDX para el análisis del material cerámico y vítreo del Patrimonio Cultural

  • Mai Cerovaz, Carolina
[ES] Esta tesis persigue la exploración de la aplicación de técnicas avanzadas de microscopía electrónica y electroquímicas como una herramienta analítica en el análisis y conservación de patrimonio cerámico vidriado. Por una parte, la instrumentación de microscopía basada en la tecnología de haz de iones enfocado (FIB) se ha consolidado como una técnica nano invasiva (ng) que ha ampliado notablemente el alcance de las aplicaciones industriales para el análisis de superficie de materiales en las últimas décadas. Sin embargo, esta técnica apenas se ha aplicado en el examen y análisis del patrimonio cultural. En la presente tesis el sistema FIB acoplado con un microscopio electrónico de barrido de emisión de campo convencional microanálisis de rayos X (FIB-FESEM-EDX) se postula como una metodología de análisis de superficie aplicada al estudio de vidriados en material cerámico: caracterización de materiales y técnica de ejecución, discriminar procesos de alteración de cerámica vidriada en función del distinto contexto de conservación. Esta tesis se plantea en dos cuerpos de estudio, por un lado, esta investigación se ha planteado en el marco general del estudio de los vidriados cerámicos desde el punto de vista de su composición, su técnica de ejecución, así como las distintas casuísticas de alteración en función del contexto en el que han permanecido las piezas durante siglos y cómo, de manera concomitante, afecta esto a los procesos de alteración. Con ello se pretende conocer y comprender cómo se desarrollan estos procesos y cuál es el grado en que estos afectan a la estabilidad de los objetos de cerámica vidriada que forman parte del patrimonio cultural. Por otra parte, se plantea con el objetivo general de explorar las capacidades que ofrece la técnica de análisis avanzada haz de iones focalizado-microscopio electrónico por emisión de campo con dispositivo de microanálisis de rayos X por dispersión de energías (FIB FESEM- EDX) en el estudio de caracterización de patrimonio cerámico., [CA] Aquesta tesi persegueix l'exploració de l'aplicació de tècniques avançades de microscòpia electrònica i electroquímiques com una eina analítica en l'anàlisi i conservació de patrimoni ceràmic vidrat. D'una banda, la instrumentació de microscòpia basada en la tecnologia de feix d'ions enfocat (FIB) s'ha consolidat com una tècnica nano invasiva (ng) que ha ampliat notablement l'abast de les aplicacions industrials per a l'anàlisi de superfície de materials en les últimes dècades. No obstant això, aquesta técnica a penes s'ha aplicat en l'examen i anàlisi del patrimoni cultural. En aquesta tesi el sistema FIB acoblat amb un microscopi electrònic de rastreig d'emissió de camp convencional microanàlisi de raigs X (FIB-FESEM-EDX) es postula com una metodologia d'anàlisi de superfície aplicada a l'estudi de vidriats en material ceràmic: caracterització de materials i tècnica de d' execució, discriminar processos d' alteració de ceràmica vidrada en funció del diferent context de conservació. Aquesta tesi es planteja en dos cossos d' estudi, d' una banda, aquesta investigació s' ha plantejat en el marc general de l' estudi dels vidriats ceràmics des del punt de vista de la seva composició, la seva tècnica d' execució, així com les diferents casuístiques de alteració en funció del context en què han romàs les peces durant segles i com, de manera concomitant, afecta això els processos d' alteració. Amb això es pretén conèixer i comprendre com es desenvolupen aquests processos i quin és el grau en què aquests afecten l' estabilitat dels objectes de ceràmica vidrada que formen part del patrimoni cultural. D'altra banda, es planteja amb l'objectiu general d'explorar les capacitats que ofereix la tècnica d'anàlisi avançada feix d'ions focalitzat-microscopi electrònic per emissió de camp amb dispositiu de microanàlisi de raigs X per dispersió d'energies (FIB FESEM- EDX) en l'estudi de caracterització de patrimoni ceràmic., [EN] This thesis aims to explore the application of advanced electron microscopy and electrochemical techniques as an analytical tool in the analysis and conservation of glazed ceramic heritage. On the one hand, microscopy instrumentation based on focused ion beam (FIB) technology has established itself as a nano-invasive (ng) technique that has greatly expanded the scope of industrial applications for surface analysis of materials in recent decades. However, this technique has hardly been applied in the examination and analysis of cultural heritage. In this thesis, the FIB system coupled with a conventional field emission scanning electron microscope X-ray microanalysis (FIB-FESEM-EDX) is proposed as a methodology for surface analysis applied to the study of glazes on ceramic material: characterisation of materials and execution technique, discrimination of alteration processes of glazed ceramics according to the different conservation context. On the one hand, this research has been approached within the general framework of the study of ceramic glazes from the point of view of their composition, their technique of execution, as well as the different cases of alteration depending on the context in which the pieces have remained for centuries and how, concomitantly, this affects the processes of alteration. The aim is to know and understand how these processes develop and the degree to which they affect the stability of the glazed ceramic objects that form part of the cultural heritage. On the other hand, the general objective is to explore the capabilities offered by the technique of advanced focused ion beam analysis-field emission electron microscopy with energy dispersive X-ray microanalysis device (FIB FESEM-EDX) in the study of the characterisation of ceramic heritage., Esta investigación ha formado parte de los proyectos I+D+I: CTQ-2017-85317-C2-1-P y PID2020-113022GB-I00 financiados por MCIN/ AEI/10.13039/501100011033, AEI y FEDER una manera de hacer Europa.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aplicación de la técnica de microscopía electrónica por emisión de campo con haz de iones focalizado en el estudio del patrimonio cultural: cerámica arqueológica y fotografía histórica

  • Domenech Carbo, Antonio
  • Mai Cerovaz, Carolina
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[ES] Este trabajo nace a partir del interés por profundizar en el conocimiento y exploración de las capacidades de los distintos métodos de análisis de patrimonio cultural basados en técnicas nano invasivas (ng). La instrumentación de microscopía basada en la tecnología de haz de iones enfocado (FIB) ha ampliado notablemente el alcance de las aplicaciones industriales en el análisis de superficie de materiales en las últimas décadas. Sin embargo, esta técnica apenas se ha aplicado en el examen y análisis del patrimonio cultural. En este estudio se exponen los resultados obtenidos en la adaptación del sistema FIB con un microscopio electrónico de barrido de emisión de campo convencional microanálisis de rayos X (FESEM-EDX) como una metodología de análisis de superficie aplicada al estudio de cerámica vidriada y a los procesos fotográficos históricos., [EN] This work is born from the interest to deepen knowledge and explore capabilities of the different methods of analysis on cultural heritage based on nanoinvasive techniques (ng). Microscopy instrumentation based on focused ion beam (FIB) technology has significantly expanded the scope of industrial applications for material surface analysis in recent decades. However, this technique has scarcely been applied in the examination and analysis of cultural heritage. This study sets out the results obtained in adapting the FIB system with a conventional X-ray micro-analysis (FESEMEDX) field emission scanning electron microscope as a surface analysis methodology applied to the glazed ceramic study and historical photographic processes., La presente investigación está financiada con los proyectos I+D: CTQ2017-85317-C2-1-P cofinanciado por el Ministerio de Ciencia Innovación y Universidades, el Fondo Europeo de Desarrollo Regional (ERDF) y la Agencia Estatal de Investigación (AEI). Los autores agradecen la colaboración de Manuel Planes, José Luis Moya y Alicia Nuez, técnicos del Servicio de Microscopía Electrónica de la Universitat Politècnica de València. Los autores desean expresar su agradecimiento a Josep Pérez, Director del Museo de Cerámica de Manises que ha facilitado el fragmento de cerámica objeto de estudio.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Independent friction-restitution modeling of two-disk collisions

  • Domenech Carbó, Antonio
  • Montagna, Elena
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The oblique collisions between two axisymmetric disks moving on a flat horizontal surface are described in terms of impact modeling based on the assumption that normal and tangential restitution mechanisms operate independently of friction. Describing these mechanisms in terms of the usual Coulomb formulation, the model allows for an interpretation of some ¿anomalous¿ experimental data reported in the literature. These experimental data, corresponding to the variation of the coefficients of friction and tangential restitution with the impact angle, remained unexplained in classic formulations, are understood within the framework of the independent friction-restitution closure. Experimental data for metallic coins are in agreement with that formulation, including rolling friction effects., Financial support was received from the MINECO Project CTQ2017-85317-C2-1-P which is supported with Ministerio de Economia, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (ERDF).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of a gelatin-based adhesive for historic paintings that incorporates citronella oil as an eco-friendly biocide

  • Lee, Yu
  • Martín-Sánchez, Inés
  • Bolivar-Galiano, Fernando
  • Martín Rey, Susana|||0000-0002-2592-7377
  • Osete Cortina, Laura|||0000-0003-0709-5885
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The presented study focuses on evaluating the efficiency of a gelatin-based product that incorporates a plasticizer (glycerol) and a biocide (citronella oil), proposed as an eco-friendly adhesive for polychrome decoration applied in different parts of the architectural complex of the Longshan Temple in Lukang (eighteenth century, Taiwan). Seven laboratory physico-chemical tests were performed: (a) viscosity measurement; (b) drying curves; (c) moisture content determination; (d) water vapor permeability test; (e) mechanical test; (f) adhesion test; (g) susceptibility to fungi colonization test, which provide information on the workability, water content and water barrier properties, as well as mechanical, adhesion, and the biocide properties of the proposed product. The obtained results indicate that the workability, mechanical and adhesive properties of the new adhesive are adequate. Permeability in polychromies is slightly reduced due to the additional barrier effect of the adhesive incorporated into the paint film. The efficiency of citronella oil for preventing the growth of fungus Aspergillus niger on paintings consolidated with the adhesive was also probed. In parallel to these laboratory trials, the micro-invasive tests carried out, using nanoindentation combined with atomic force microscopy (NI-AFM), provided direct evidence for the improvement in the mechanical properties induced by applying the new adhesive to the original polychromies., This work was supported by the Spanish Ministerio de Economia, Industria y Competitividad (MINECO), the Fondo Europeo de Desarrollo Regional (ERDF), and the Agencia Estatal de Investigacion (AEI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

FIB-FESEM and EMPA results on Antoninianus silver coins for manufacturing and corrosion processes

  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Di Turo, Francesca
  • Montoya, Noemi
  • Catalli, Fiorenzo
  • DOMÉNECH CARBÓ, ANTONIO
  • De Vito, Caterina
[EN] A set of ancient Antoninianus silver coins, dating back between 249 and 274¿A.D. and minted in Rome, Galliae, Orient and Ticinum, have been characterized. We use, for the first time, a combination of nano-invasive (focused ion beam-field emission scanning electron microscopy-X-ray microanalysis (FIB-FESEM-EDX), voltammetry of microparticles (VIMP)) and destructive techniques (scanning electron microscopy (SEM-EDX) and electron microprobe analysis (EMPA)) along with non-invasive, i.e., micro-Raman spectroscopy. The results revealed that, contrary to the extended belief, a complex Ag-Cu-Pb-Sn alloy was used. The use of alloys was common in the flourishing years of the Roman Empire. In the prosperous periods, Romans produced Ag-Cu alloys with relatively high silver content for the manufacture of both the external layers and inner nucleus of coins. This study also revealed that, although surface silvering processes were applied in different periods of crisis under the reign of Antoninii, even during crisis, Romans produced Antoninianus of high quality. Moreover, a first attempt to improve the silvering procedure using Hg-Ag amalgam has been identified., Financial support was provided by Sapienza University of Rome (Ateneo funding, 2014 15) and Spanish projects CTQ2014-53736-C3-1-P and CTQ2014-53736-C3-2-P, which are supported with Ministerio de Economía, Industria y Competitividad (MINECO) and Fondo Europeo de Desarrollo Regional (ERDF) funds, as well as project CTQ2017-85317-C2-1-P supported with funds from, MINECO, ERDF and Agencia Estatal de Investigación (AEI). PhD grants of the Department of Earth Sciences, Sapienza University of Rome, are gratefully acknowledged
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiple-scan voltammetry of immobilized particles of ancient copper/bronze coins

  • Domenech Carbo, Antonio
  • Donnici, Margherita
  • Álvarez-Romero, Carla
  • Daniele, Salvatore
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The application of a multiple-scan strategy to study the structure of the corrosion patina of copper/bronze ancient objects using the voltammetry of immobilized microparticles (VIMP) is described. Upon nanosample attachment to graphite electrodes in contact with aqueous acetate buffer, voltammetric signatures characterizing cuprite with variable degree of crystallinity are recorded by means of successive cathodic scans reflecting the composition of the corrosion patina. The reported methodology, complemented with ion beam-field emission scanning electron microscopy (FIB-FESEM) and high-resolution field emission scanning electron microscopy (HRFESM-EDX), is applied to a set of coins fabricated between 1709 and 1962 revealing different corrosion patterns., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged. The authors wish to thank Mr. Manuel Planes, Dr. Jose Luis Moya and Alicia Nuez Imbernon technical supervisors of the Electron Microscopy Service of the Polytechnical University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Remoistenable temporary supports for facing of canvas paintings

  • Alba, Paola
[ES] Aunque el empapelado es una técnica ampliamente utilizada en restauración con diversos propósitos, todavía no se dispone de mucha información técnica sobre la misma. A primera vista, acarrea consecuencias complejas, incluyendo cambios en lascapas pictoricas, pudiendo tener también potenciales repercusiones en la propia conservación de la obra. En la mayoría de casos, sería más adecuado recurrir a otras técnicas alternativas y menos intrusivas. Por este motivo, a lo largo de esta tesis doctoral se ha desarrollado un protocolo de investigación orientado al diseño de soportes temporales rehumectables (remoistenable temporary supports: RTS) para la protección de pinturas sobre lienzos, un método alternativo que permite un mayor control de la penetración de adhesivo en el sustrato, y por tanto una remoción de residuos más sencilla y eficaz. Durante este estudio se prestó especial atención a las necesidades de los restauradores, no solo en términos de disponibilidad y eficiencia económica, sino también en lo concerniente a la salud de los operadores y el cuidado del medio ambiente. En la primera sección de esta tesis se ha realizado una revisión histórica, comenzando por las primeras fuentes indirectas del Siglo XVIII hasta la actualidad. A continuación, se analizan los mecanismos adhesivos y de penetración del empapelado, focalizándose en aspectos relacionados con la conservación, relacionados con los materiales empleados y metodologías de aplicación. En la segunda sección se describe el estudio de la metodología innovadora de los RTS, ensayada de acuerdo a un meticuloso proyecto de investigación adaptando tecnologías analíticas avanzadas a las necesidades específicas del estudio realizado. Durante la primera etapa experimental, se realizaron análisis químicos, físicos y mecánicos de las diferentes clases de materiales (adhesivos y soportes temporales) y su compatibilidad para la preparación de tejidos rehumectables. La segunda etapa de la investigación se centró en la evaluación de la aplicación de soportes temporales rehumectables en maquetas simuladoras de pinturas en lienzo, con el fin de ensayar aquellos factores considerados más relevantes. Se realizaron observaciones con Microscopía Óptica empleando luz visible y UV, Microscopía electrónica de barrido de emisión de campo (FESEM) para evaluar la permanencia de residuos y el estudio de posibles modificaciones que podrían darse en la superficie de la pintura. Se empleó micro-espectroscopía Raman asociada a un microscopio de alta resolución para determinar la penetración del adhesivo en las grietas de las maquetas. Finalmente, se realizaron pruebas de desprendimiento (peeling test) en diferentes condiciones ambientales para estudiar la fuerza adhesiva de los RTS seleccionados., [CA] Tot i que la protecció del color és una tècnica àmpliament utilitzada en restauració amb diversos propòsits, encara no s'hi disposa de molta informació tècnica. A primera vista, implica conseqüències complexes, incloent-hi canvis en les capes pictòriques, que poden tenir també potencials repercussions en la mateixa conservació de l'obra. En la majoria de casos, seria més adequat recórrer a altres tècniques alternatives i menys intrusives. Per aquest motiu, al llarg d'aquesta tesi doctoral s'ha desenvolupat un protocol d'investigació orientat al disseny de suports temporals rehumectables (Remoistenable Temporary Supports: RTS) per a la protecció de pintures sobre llenç, un mètode alternatiu que permet un major control de la penetració d'adhesiu en el substrat i, per tant, una eliminació de residus més senzilla i eficaç. Durant aquest estudi es va prestar especial atenció a les necessitats dels restauradors, no solament en termes de disponibilitat i eficiència econòmica, sinó també pel que fa a la salut dels operadors i la cura del medi ambient. En la primera secció d'aquesta tesi s'ha realitzat una revisió històrica, començant per les primeres fonts indirectes del segle XVIII fins a l'actualitat. A continuació, s'analitzen els mecanismes adhesius i de penetració de l'empaperat, i es focalitza en aspectes relacionats amb la conservació futura dels materials emprats i metodologies d'aplicació. En la segona secció es descriu l'estudi de la metodologia innovadora dels RTS, assajada d'acord amb un meticulós projecte d'investigació que adapta tecnologies analítiques avançades a les necessitats específiques de l'estudi realitzat. Durant la primera etapa experimental, es realitzaren anàlisis químiques, físiques i mecàniques de les diferents classes de materials (adhesius i suports temporals) i la seua compatibilitat per a la preparació de teixits rehumectables. La segona etapa de la investigació es va centrar en l'avaluació de l'aplicació de suports temporals rehumectables en maquetes simuladores de pintures en llenç, amb la finalitat d'assajar aquells factors considerats més rellevants. Es realitzaren observacions amb microscòpia òptica emprant llum visible i UV, Microscòpia electrònica d'escaneig d'emissió de camp (FESEM) per a avaluar la permanència de residus i l'estudi de possibles modificacions que podrien donarse en la superfície de la pintura. S'empraren microespectroscòpia Raman associada a un microscopi d'alta resolució per a determinar la penetració de l'adhesiu en les clivelles de les provetes. Finalment, es realitzaren proves de despreniment (peeling test) en diferents condicions ambientals per a estudiar la força adhesiva dels RTS seleccionats., [EN] Although facing is widely used for multiple purposes, there is still little information about it. At first glance, facing seems to be an almost neutral and simple intervention. Its application, however, entails complex consequences including changes to a painting's strata, and it can have potential repercussions on the conservation of the paint itself. In most cases, it would be better to recur to alternative and less intrusive methods, but sometimes the use of facing is strictly necessary. For this reason, during this PhD a research protocol addressed the design of remoistenable temporary supports (RTS) for the facing of canvas paintings, an alternative method that enables a higher control of the adhesive penetration into the substrate, and thus the easier removal of residues. Great attention was given in this assessment to the needs of restorers, in terms of not only availability and the cost-effectiveness of materials, but also for the concerns of the safety of the operator as well as the environment. In the first section of this dissertation, a historical review is made starting from the first indirect sources of the 18th century up to the present day. Then facing's adhesive and penetrative mechanisms are analysed, focusing on conservative issues related to the used materials and application methodologies. The second section describes the assessment of the innovative RTS methodology, tested according to a meticulous research project adapting advanced analytical technologies to the specific needs. During the first experimental stage, chemical, physical and mechanical analyses of the different classes of materials (adhesives and temporary supports) and their compatibility for the preparation of remoistenable tissues were carried out. The second step of the investigation focused on the evaluation of the application of remoistenable temporary supports on mock-ups reproducing a canvas painting, in order to test those considered the most relevant factors. Observations with optical microscope in visible and ultraviolet (UV) light and analyses with fieldemission scanning electron microscopy (FESEM) were carried out to evaluate the permanence of residues and the assessment of the possible modifications that may have occurred on the painted surface. Micro-Raman spectroscopy associated with a high-resolution microscope was used to determine the penetration of the adhesive into the cracks of the mock-ups. Finally, peeling tests at different environmental conditions were carried out to assess the adhesion strength of the selected RTS., An acknowledgment to the financial support from the Spanish “I+D+I” project CTQ2017-85317-C2-1-P, which is supported by the Ministerio de Ciencia, Innovación y Universidades, Fondo Europeo de Desarrollo Regional (ERDF) funds and Agencia Estatal de Investigación(AEI).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical identification of painters/workshops: The case of Valencian Renaissance-Baroque painters (ca. 1550- ca. 1670)

  • Doménech Carbó, Antonio
  • Castelló Palacios, Amparo
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
  • Guerola Blay, Vicente|||0000-0001-5223-7737
  • Pérez-Marín, Eva|||0000-0003-3201-8451
[EN] The voltammetry of immobilized particles (VIMP) methodology was applied to discriminate the oil painting production of a series of seven painters/workshops that worked in Valencia (Spain) between ca. 1530 and ca. 1650. When submicrosamples used for cross-section FESEM/EDX analysis were attached to graphite electrodes in contact with aqueous acetate buffer, well-defined responses were obtained. The reductive processes of lead pigments (lead white and lead-tin yellow) overlapped those associated to the lead soaps and other species resulting from the pigment-oil binder interaction in the sample. Such responses, which are theoretically modeled, were sensitive to changes in paint type and dose and thus provided a painter/workshop-characteristic voltammetric response defining a usable electrochemical fingerprint for authorship assessments. (C) 2018 Elsevier Ltd. All rights reserved., Project CTQ2017-85317-C2-1-P, supported with Ministerio de Economia, Industria y Competitividad (MINECO), Fondo Europeo de Desarrollo Regional (ERDF) and Agencia Estatal de Investigacion (AEI), is gratefully acknowledged. The authors wish also to thank Mr. Manuel Planes and Dr. Jose Luis Moya, technical supervisors of the Electron Microscopy Service of the Universitat Politecnica de Valencia.