Pasar al contenido principal

TELEDETECCION ATMOSFERICA MEDIANTE SENSORES COOPERATIVOS LIDAR, RADAR Y PASIVOS: APLICACIONES SOBRE TIERRA Y MAR PARA LA OBSERVACION ATMOSFERICA Y ENERGIA EOLICA OFF-SHORE

PGC2018-094132-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application and Testing of the Extended-Kalman-Filtering Technique for Determining the Planetary Boundary-Layer Height over Athens, Greece

  • Kokkalis, Panagiotis
  • Alexiou, Dimitrios
  • Papayannis, Alexandros D.
  • Rocadenbosch, Francesc
  • Soupiona, Ourania
  • Raptis, Ioannis Panagiotis
  • Mylonaki, Maria
  • Tzanis, C.
  • Christodoulakis, John K.
We investigate the temporal evolution of the planetary boundary-layer (PBL) height over the basin of Athens, Greece, during a 6-year period (2011–2016), using data from a Raman lidar system. The range-corrected lidar signals are selected around local noon (1200 UTC) and midnight (0000 UTC), for a total of 332 cases: 165 days and 167 nights. In this dataset, the extended-Kalman filtering technique is applied and tested for the determination of the PBL height. Several well-established techniques for the PBL height estimation based on lidar data are also tested for a total of 35 cases. The lidar-derived PBL heights are compared to those derived from radiosonde data. The mean PBL height over Athens is found to be 1617 ± 324 m at 1200 UTC and 892 ± 130 m at 0000 UTC for the period examined, while the mean PBL-height growth rate is found to be 170 ± 64 m h and 90 ± 17 m h during daytime and night-time, respectively., The research leading to these results has received additional funding from the European Union 7th Framework Program (FP7/2011-2015) and Horizon 2020/2015-2021 Research and Innovation program (ACTRIS) under grant agreements nos 262254, 654109, and 739530, as well as from Spanish National Science Foundation and FEDER funds PGC2018-094132-B-I00. CommSensLab-UPC is a María-de-Maeztu Excellence Unit, MDM-2016-0600, funded by the Agencia Estatal de Investigación, Spain
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing Obukhov length and friction velocity from floating lidar observations: A data screening and sensitivity computation approach

  • Araújo da Silva, Marcos P.
  • Rocadenbosch, Francesc
  • Farré-Guarné, Joan
  • Salcedo-Bosch, Andreu
  • González-Marco, Daniel
  • Peña, Alfredo
This article belongs to the Topic High-Resolution Earth Observation Systems, Technologies, and Applications., This work presents a parametric-solver algorithm for estimating atmospheric stability and friction velocity from floating Doppler wind lidar (FDWL) observations close to the mast of IJmuiden in the North Sea. The focus of the study was two-fold: (i) to examine the sensitivity of the computational algorithm to the retrieved variables and derived stability classes (the latter through confusion-matrix theory), and (ii) to present data screening procedures for FDWLs and fixed reference instrumentation. The performance of the stability estimation algorithm was assessed with reference to wind speed and temperature observations from the mast. A fixed-to-mast Doppler wind lidar (DWL) was also available, which provides a reference for wind-speed observations free from sea-motion perturbations. When comparing FDWL- and mast-derived mean wind speeds, the obtained determination coefficient was as high as that of the fixed-to-mast DWL against the mast (ρ2=0.996) with a root mean square error (RMSE) of 0.25 m/s. From the 82-day measurement campaign at IJmuiden (10,833 10 min records), the parametric algorithm showed that the atmosphere was neutral (31% of the cases), stable (28%), or near-neutral stable (19%) during most of the campaign. These figures satisfactorily agree with values estimated from the mast measurements (31%, 27%, and 19%, respectively)., This research was part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (CommSensLab Excellence Unit) funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER. The work of M.P.A.S was supported under grant PRE2018-086054 funded by MCIN/AEU/10.13039/501100011033 and FSE “El FSE invierte en tu futuro”. The work of A.S-B was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced dual filter for floating wind lidar motion correction: The impact of wind and initial scan phase models

  • Salcedo-Bosch, Andreu
  • Rocadenbosch, Francesc
  • Sospedra, Joaquim
This article belongs to the Section Atmospheric Remote Sensing., An enhanced filter for floating Doppler wind lidar motion correction is presented. The filter relies on an unscented Kalman filter prototype for floating-lidar motion correction without access to the internal line-of-sight measurements of the lidar. In the present work, we implement a new architecture based on two cooperative estimation filters and study the impact of different wind and initial scan phase models on the filter performance in the coastal environment of Barcelona. Two model combinations are considered: (i) a basic random walk model for both the wind turbulence and the initial scan phase and (ii) an auto-regressive model for wind turbulence along with a uniform circular motion model for the scan phase. The filter motion-correction performance using each of the above models was evaluated with reference to a fixed lidar in different wind and motion scenarios (low- and high-frequency turbulence cases) recorded during a 25-day campaign at “Pont del Petroli”, Barcelona, by clustered statistical analysis. The auto-regressive wind model and the uniform circular motion phase model permitted the filter to overcome divergence in all wind and motion scenarios. The statistical indicators comparing both instruments showed overall improvement. The mean deviation increased from 1.62% (without motion correction) to −0.07% (with motion correction), while the root-mean-square error decreased from 1.87% to 0.58%, and the determination coefficient (R2 ) improved from 0.90 to 0.96., This research project was part of projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A Robust Adaptive Unscented Kalman Filter for floating Doppler Wind-LiDAR motion correction

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
This study presents a new method for correcting the six degrees of freedom motion-induced error in ZephIR 300 floating Doppler Wind-LiDAR-derived data, based on a Robust Adaptive Unscented Kalman Filter. The filter takes advantage of the known floating Doppler Wind-LiDAR (FDWL) dynamics, a velocity–azimuth display algorithm, and a wind model describing the LiDAR-retrieved wind vector without motion influence. The filter estimates the corrected wind vector by adapting itself to different atmospheric and motion scenarios, and by estimating the covariance matrices of related noise processes. The measured turbulence intensity by the FDWL (with and without correction) was compared against a reference fixed LiDAR over a 25-day period at “El Pont del Petroli”, Barcelona. After correction, the apparent motion-induced turbulence was greatly reduced, and the statistical indicators showed overall improvement. Thus, the Mean Difference improved from -1.70% (uncorrected) to 0.36% (corrected), the Root Mean Square Error (RMSE) improved from 2.01% to 0.86%, and coefficient of determination improved from 0.85 to 0.93., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“Comm- SensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessing Obukhov length and friction velocity from floating lidar observations: A data screening and sensitivity computation approach

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • González Marco, Daniel|||0000-0002-9619-1897
  • Peña Diaz, Alfredo
This work presents a parametric-solver algorithm for estimating atmospheric stability and friction velocity from floating Doppler wind lidar (FDWL) observations close to the mast of IJmuiden in the North Sea. The focus of the study was two-fold: (i) to examine the sensitivity of the computational algorithm to the retrieved variables and derived stability classes (the latter through confusion-matrix theory), and (ii) to present data screening procedures for FDWLs and fixed reference instrumentation. The performance of the stability estimation algorithm was assessed with reference to wind speed and temperature observations from the mast. A fixed-to-mast Doppler wind lidar (DWL) was also available, which provides a reference for wind-speed observations free from sea-motion perturbations. When comparing FDWL- and mast-derived mean wind speeds, the obtained determination coefficient was as high as that of the fixed-to-mast DWL against the mast (ρ2=0.996) with a root mean square error (RMSE) of 0.25 m/s. From the 82-day measurement campaign at IJmuiden (10,833 10 min records), the parametric algorithm showed that the atmosphere was neutral (31% of the cases), stable (28%), or near-neutral stable (19%) during most of the campaign. These figures satisfactorily agree with values estimated from the mast measurements (31%, 27%, and 19%, respectively)., This research was part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (Comm- SensLab Excellence Unit) funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER. The work of M.P.A.S was supported under grant PRE2018-086054 funded by MCIN/AEU/10.13039/501100011033 and FSE “El FSE in- vierte en tu futuro”. The work of A.S-B was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Ceilometer-based rain-rate estimation: A case-study comparison with S-band radar and disdrometer retrievals in the context of VORTEX-SE

  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Barragán Cuesta, Rubén
  • Frasier, Stephen J.
  • Waldinger, Joseph
  • Turner, David Dave
  • Tanamachi, Robin
  • Dawson, Daniel
Attenuated backscatter measurements from a Vaisala CL31 ceilometer and a modified form of the well-known slope method are used to derive the ceilometer extinction profiles during rain events, restricted to rainfall rates (RRs) below approximately 10 mm/h. RR estimates from collocated S-band radar and portable disdrometer are used to derive the RR-to-extinction correlation models for the ceilometer-radar and ceilometer-disdrometer combinations. Data were collected during an intensive observation period of the Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) conducted in northern Alabama. These models are used to estimate the RR from the ceilometer observations in similar situations that do not have collocated radar or the disdrometer. Such correlation models are, however, limited by the different temporal and spatial resolutions of the measured variables, measurement capabilities of the instruments, and the inherent assumption of a homogeneous atmosphere. An empirical method based on extinction and RR uncertainty scoring and covariance fitting are proposed to solve, in part, these limitations., This work was supported by the National Oceanic and Atmospheric Administration (NOAA) under Grant NA1501R4590232 and Grant NA16OAR4590209 and by the Department of Earth, Atmospheric, and Planetary Sciences, Purdue University. CommSensLab-Universitat Politècnica de Catalunya (UPC) (which is a María de Maeztu Excellence Unit funded by the Agencia Estatal de Investigación, Spain; MDM-2016-0600) collaborated via Spanish Government - European Regional Development Funds under PGC2018-094132-B-I00 and TEC2015- 63832-P projects, and via European Union (funds) (EU) Funds under Grant H2020 ACTRIS-2 (GA-654109) and Grant ACTRIS-PPP (GA-739530). The work of Rubén Barragán was supported by the Spanish Ministry of Science, Innovation and Universities under Grant BES-2013-066340., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Estimation of wave period from pitch and roll of a lidar buoy

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Gutiérrez Antuñano, Miguel Ángel|||0000-0003-3725-3880
  • Tiana Alsina, Jordi|||0000-0001-8359-9378
This work proposes a new wave-period estimation (L-dB) method based on the power-spectral-density (PSD) estimation of pitch and roll motional time series of a Doppler wind lidar buoy under the assumption of small angles (±22 deg) and slow yaw drifts (1 min), and the neglection of translational motion. We revisit the buoy’s simplified two-degrees-of-freedom (2-DoF) motional model and formulate the PSD associated with the eigenaxis tilt of the lidar buoy, which was modelled as a complex-number random process. From this, we present the L-dB method, which estimates the wave period as the average wavelength associated to the cutoff frequency span at which the spectral components drop off L decibels from the peak level. In the framework of the IJmuiden campaign (North Sea, 29 March–17 June 2015), the L-dB method is compared in reference to most common oceanographic wave-period estimation methods by using a TriaxysTM buoy. Parametric analysis showed good agreement (correlation coefficient, ρ = 0.86, root-mean-square error (RMSE) = 0.46 s, and mean difference, MD = 0.02 s) between the proposed L-dB method and the oceanographic zero-crossing method when the threshold L was set at 8 dB., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-IMP project GA-871115. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigación, Spain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Enhanced dual filter for floating wind lidar motion correction: The impact of wind and initial scan phase models

  • Salcedo Bosch, Andreu|||0000-0001-7398-925X
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Sospedra Iglesias, Joaquim|||0000-0003-4207-7922
An enhanced filter for floating Doppler wind lidar motion correction is presented. The filter relies on an unscented Kalman filter prototype for floating-lidar motion correction without access to the internal line-of-sight measurements of the lidar. In the present work, we implement a new architecture based on two cooperative estimation filters and study the impact of different wind and initial scan phase models on the filter performance in the coastal environment of Barcelona. Two model combinations are considered: (i) a basic random walk model for both the wind turbulence and the initial scan phase and (ii) an auto-regressive model for wind turbulence along with a uniform circular motion model for the scan phase. The filter motion-correction performance using each of the above models was evaluated with reference to a fixed lidar in different wind and motion scenarios (low- and high-frequency turbulence cases) recorded during a 25-day campaign at “Pont del Petroli”, Barcelona, by clustered statistical analysis. The auto-regressive wind model and the uniform circular motion phase model permitted the filter to overcome divergence in all wind and motion scenarios. The statistical indicators comparing both instruments showed overall improvement. The mean deviation increased from 1.62% (without motion correction) to -0.07% (with motion correction), while the root-mean-square error decreased from 1.87% to 0.58%, and the determination coefficient (R2) improved from 0.90 to 0.96., This research project was part of projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Motivating a synergistic mixing-layer height retrieval method using backscatter lidar returns and microwave-radiometer temperature observations

  • Silva, Marcos Paulo Aráujo da|||0000-0002-5260-8937
  • Rocadenbosch Burillo, Francisco|||0000-0001-8614-4408
  • Tanamachi, Robin
  • Saeed, Umar|||0000-0003-0261-2767
Mixing-Layer-Height (MLH) retrieval methods using backscattered lidar signals from a ceilometer (Jenoptik CHM-15k Nimbus) and temperature profiles from a Microwave Radiometer (MWR, HATPRO RPG) are compared in terms of their complementary capabilities and associated uncertainties. The Extended Kalman Filter (EKF) is used for MLH retrieval from backscattered lidar signals and the parcel method is used for MLH retrieval from MWR-derived potential-temperature profiles. The two principal sources of uncertainty in ceilometer-based MLH estimates are (i) incorrect layer attribution (~ hundreds of meters) and (ii) noise-induced errors (about 50 m at 3σ). MWR MLH uncertainties comprise (i) the total uncertainty in the retrieved potential temperature profile and (ii) ±0.5 K uncertainty in the surface temperature. Ceilometer-and MWR-based MLH estimates are in turn compared with reference to MLH estimates from radiosoundings. Twenty one measurement days from the HD(CP)2 Observational Prototype Experiment (HOPE) campaign at Jülich, Germany are considered. It is shown that the MWR can track the full Mixed Layer (ML) diurnal cycle (i.e., including morning and evening transitions) with height-increasing error bars. The ceilometer-EKF MLH estimates are much smaller errorbars than those from the MWR under the well-developed clear-sky ML but the ceilometer-EKF is prone to ambiguous tracking some multilayer scenarios (e.g., the residual layer). We therefore introduce the synergistic MLH retrieval approach that combines both ceilometer and MWR estimates in order to optimize the benefits of both., This work was supported by the Spanish Government – European Regional Development Funds under PGC2018- 094132-B-I00 project, and via European Union (EU) Funds under projects ACTRIS-IMP (GA-871115) and GA 101008004 (ATMO-ACCESS). CommSensLab-UPC is a María-de-Maeztu Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of Marcos P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Robust Adaptive Unscented Kalman Filter for floating Doppler Wind-LiDAR motion correction

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Sospedra Iglesias, Joaquim
This study presents a new method for correcting the six degrees of freedom motion-induced error in ZephIR 300 floating Doppler Wind-LiDAR-derived data, based on a Robust Adaptive Unscented Kalman Filter. The filter takes advantage of the known floating Doppler Wind-LiDAR (FDWL) dynamics, a velocity–azimuth display algorithm, and a wind model describing the LiDAR-retrieved wind vector without motion influence. The filter estimates the corrected wind vector by adapting itself to different atmospheric and motion scenarios, and by estimating the covariance matrices of related noise processes. The measured turbulence intensity by the FDWL (with and without correction) was compared against a reference fixed LiDAR over a 25-day period at “El Pont del Petroli”, Barcelona. After correction, the apparent motion-induced turbulence was greatly reduced, and the statistical indicators showed overall improvement. Thus, the Mean Difference improved from -1.70% (uncorrected) to 0.36% (corrected), the Root Mean Square Error (RMSE) improved from 2.01% to 0.86%, and coefficient of determination improved from 0.85 to 0.93., This research is part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (“Comm- SensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported under grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Motivating a synergistic mixing-layer height retrieval method using backscatter lidar returns and microwave-radiometer temperature observations

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Tanamachi, Robin
  • Saeed, Umar
Mixing-Layer-Height (MLH) retrieval methods using backscattered lidar signals from a ceilometer (Jenoptik CHM-15k Nimbus) and temperature profiles from a Microwave Radiometer (MWR, HATPRO RPG) are compared in terms of their complementary capabilities and associated uncertainties. The Extended Kalman Filter (EKF) is used for MLH retrieval from backscattered lidar signals and the parcel method is used for MLH retrieval from MWR-derived potential-temperature profiles. The two principal sources of uncertainty in ceilometer-based MLH estimates are (i) incorrect layer attribution (~ hundreds of meters) and (ii) noise-induced errors (about 50 m at 3σ). MWR MLH uncertainties comprise (i) the total uncertainty in the retrieved potential temperature profile and (ii) ±0.5 K uncertainty in the surface temperature. Ceilometer-and MWR-based MLH estimates are in turn compared with reference to MLH estimates from radiosoundings. Twenty one measurement days from the HD(CP)2 Observational Prototype Experiment (HOPE) campaign at Jülich, Germany are considered. It is shown that the MWR can track the full Mixed Layer (ML) diurnal cycle (i.e., including morning and evening transitions) with height-increasing error bars. The ceilometer-EKF MLH estimates are much smaller errorbars than those from the MWR under the well-developed clear-sky ML but the ceilometer-EKF is prone to ambiguous tracking some multilayer scenarios (e.g., the residual layer). We therefore introduce the synergistic MLH retrieval approach that combines both ceilometer and MWR estimates in order to optimize the benefits of both., This work was supported by the Spanish Government – European Regional Development Funds under PGC2018- 094132-B-I00 project, and via European Union (EU) Funds under projects ACTRIS-IMP (GA-871115) and GA 101008004 (ATMO-ACCESS). CommSensLab-UPC is a María-de-Maeztu Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigacion, Spain. Data were provided by Jülich Observatory for Cloud Evolution (JOYCE-CF), a core facility funded by Deutsche Forschungsgemeinschaft via grant DFG LO 901/7-1. The work of Marcos P. Araujo da Silva was supported by the Spanish Ministry of Science, Innovation and Universities under Grant PRE2018-086054., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhanced dual filter for floating wind lidar motion correction: The impact of wind and initial scan phase models

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Sospedra Iglesias, Joaquim
An enhanced filter for floating Doppler wind lidar motion correction is presented. The filter relies on an unscented Kalman filter prototype for floating-lidar motion correction without access to the internal line-of-sight measurements of the lidar. In the present work, we implement a new architecture based on two cooperative estimation filters and study the impact of different wind and initial scan phase models on the filter performance in the coastal environment of Barcelona. Two model combinations are considered: (i) a basic random walk model for both the wind turbulence and the initial scan phase and (ii) an auto-regressive model for wind turbulence along with a uniform circular motion model for the scan phase. The filter motion-correction performance using each of the above models was evaluated with reference to a fixed lidar in different wind and motion scenarios (low- and high-frequency turbulence cases) recorded during a 25-day campaign at “Pont del Petroli”, Barcelona, by clustered statistical analysis. The auto-regressive wind model and the uniform circular motion phase model permitted the filter to overcome divergence in all wind and motion scenarios. The statistical indicators comparing both instruments showed overall improvement. The mean deviation increased from 1.62% (without motion correction) to -0.07% (with motion correction), while the root-mean-square error decreased from 1.87% to 0.58%, and the determination coefficient (R2) improved from 0.90 to 0.96., This research project was part of projects PGC2018-094132-B-I00 and MDM-2016-0600 (“CommSensLab” Excellence Unit) funded by Ministerio de Ciencia e Investigación (MCIN)/ Agencia Estatal de Investigación (AEI)/ 10.13039/501100011033/ FEDER “Una manera de hacer Europa”. The work of A. Salcedo-Bosch was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ceilometer-based rain-rate estimation: A case-study comparison with S-band radar and disdrometer retrievals in the context of VORTEX-SE

  • Rocadenbosch Burillo, Francisco
  • Barragán Cuesta, Rubén
  • Frasier, Stephen J.
  • Waldinger, Joseph
  • Turner, David Dave
  • Tanamachi, Robin
  • Dawson, Daniel
Attenuated backscatter measurements from a Vaisala CL31 ceilometer and a modified form of the well-known slope method are used to derive the ceilometer extinction profiles during rain events, restricted to rainfall rates (RRs) below approximately 10 mm/h. RR estimates from collocated S-band radar and portable disdrometer are used to derive the RR-to-extinction correlation models for the ceilometer-radar and ceilometer-disdrometer combinations. Data were collected during an intensive observation period of the Verification of the Origins of Rotation in Tornadoes Experiment Southeast (VORTEX-SE) conducted in northern Alabama. These models are used to estimate the RR from the ceilometer observations in similar situations that do not have collocated radar or the disdrometer. Such correlation models are, however, limited by the different temporal and spatial resolutions of the measured variables, measurement capabilities of the instruments, and the inherent assumption of a homogeneous atmosphere. An empirical method based on extinction and RR uncertainty scoring and covariance fitting are proposed to solve, in part, these limitations., This work was supported by the National Oceanic and Atmospheric Administration (NOAA) under Grant NA1501R4590232 and Grant NA16OAR4590209 and by the Department of Earth, Atmospheric, and Planetary Sciences, Purdue University. CommSensLab-Universitat Politècnica de Catalunya (UPC) (which is a María de Maeztu Excellence Unit funded by the Agencia Estatal de Investigación, Spain; MDM-2016-0600) collaborated via Spanish Government - European Regional Development Funds under PGC2018-094132-B-I00 and TEC2015- 63832-P projects, and via European Union (funds) (EU) Funds under Grant H2020 ACTRIS-2 (GA-654109) and Grant ACTRIS-PPP (GA-739530). The work of Rubén Barragán was supported by the Spanish Ministry of Science, Innovation and Universities under Grant BES-2013-066340., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Estimation of wave period from pitch and roll of a lidar buoy

  • Salcedo Bosch, Andreu
  • Rocadenbosch Burillo, Francisco
  • Gutiérrez Antuñano, Miguel Ángel
  • Tiana Alsina, Jordi
This work proposes a new wave-period estimation (L-dB) method based on the power-spectral-density (PSD) estimation of pitch and roll motional time series of a Doppler wind lidar buoy under the assumption of small angles (±22 deg) and slow yaw drifts (1 min), and the neglection of translational motion. We revisit the buoy’s simplified two-degrees-of-freedom (2-DoF) motional model and formulate the PSD associated with the eigenaxis tilt of the lidar buoy, which was modelled as a complex-number random process. From this, we present the L-dB method, which estimates the wave period as the average wavelength associated to the cutoff frequency span at which the spectral components drop off L decibels from the peak level. In the framework of the IJmuiden campaign (North Sea, 29 March–17 June 2015), the L-dB method is compared in reference to most common oceanographic wave-period estimation methods by using a TriaxysTM buoy. Parametric analysis showed good agreement (correlation coefficient, ρ = 0.86, root-mean-square error (RMSE) = 0.46 s, and mean difference, MD = 0.02 s) between the proposed L-dB method and the oceanographic zero-crossing method when the threshold L was set at 8 dB., This research was funded by the Spanish Government and EU Regional Development Funds, ARS project PGC2018-094132-B-I00 and ACTRIS-IMP project GA-871115. The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7) supported the measurement campaigns. The Generalitat de Catalunya—AGAUR funded doctoral grant 2020 FISDU 00455 by A. Salcedo-Bosch. CommSensLab-UPC is an Excellence Unit (MDM-2016-0600) funded by the Agencia Estatal de Investigación, Spain., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessing Obukhov length and friction velocity from floating lidar observations: A data screening and sensitivity computation approach

  • Silva, Marcos Paulo Aráujo da
  • Rocadenbosch Burillo, Francisco
  • Farré Guarné, Joan
  • Salcedo Bosch, Andreu
  • González Marco, Daniel
  • Peña Diaz, Alfredo
This work presents a parametric-solver algorithm for estimating atmospheric stability and friction velocity from floating Doppler wind lidar (FDWL) observations close to the mast of IJmuiden in the North Sea. The focus of the study was two-fold: (i) to examine the sensitivity of the computational algorithm to the retrieved variables and derived stability classes (the latter through confusion-matrix theory), and (ii) to present data screening procedures for FDWLs and fixed reference instrumentation. The performance of the stability estimation algorithm was assessed with reference to wind speed and temperature observations from the mast. A fixed-to-mast Doppler wind lidar (DWL) was also available, which provides a reference for wind-speed observations free from sea-motion perturbations. When comparing FDWL- and mast-derived mean wind speeds, the obtained determination coefficient was as high as that of the fixed-to-mast DWL against the mast (ρ2=0.996) with a root mean square error (RMSE) of 0.25 m/s. From the 82-day measurement campaign at IJmuiden (10,833 10 min records), the parametric algorithm showed that the atmosphere was neutral (31% of the cases), stable (28%), or near-neutral stable (19%) during most of the campaign. These figures satisfactorily agree with values estimated from the mast measurements (31%, 27%, and 19%, respectively)., This research was part of the projects PGC2018-094132-B-I00 and MDM-2016-0600 (Comm- SensLab Excellence Unit) funded by the Ministerio de Ciencia e Investigación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/501100011033/ FEDER. The work of M.P.A.S was supported under grant PRE2018-086054 funded by MCIN/AEU/10.13039/501100011033 and FSE “El FSE in- vierte en tu futuro”. The work of A.S-B was supported by grant 2020 FISDU 00455 funded by Generalitat de Catalunya—AGAUR. The European Commission collaborated under projects H2020 ACTRIS-IMP (GA-871115) and H2020 ATMO-ACCESS (GA-101008004). The European Institute of Innovation and Technology (EIT), KIC InnoEnergy project NEPTUNE (call FP7), supported the measurement campaigns., Peer Reviewed, Postprint (published version)