Pasar al contenido principal

IMPACTS AND RECYCLING OF DEVICES FOR ENERGY CONVERSION AND STORAGE: SUSTAINABILITY OF INDUSTRIAL PRODUCTION

PID2019-104272RB-C55

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITÉCNICA DE CARTAGENA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene oxide: Key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, E.
  • Hernández-Ferrer, Javier
  • Galán, Alejandro
  • Ansón-Casaos, Alejandro
  • Navarro Rodríguez, Mario
  • Palacios-Lidón, E.
  • Colchero, J.
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs–GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs–GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs–GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs–GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles., This work was funded by Spanish MCIN/AEI/10.13039/501100011033 under projects PID2019-104272RB-C51, PID2019-104272RB-C52, PID2019-104272RB-C55, and PID2019-104739GB-I00. Financial support from Gobierno de Aragon (DGA) under project “Grupos Consolidados” T03_20R is acknowledged. E.C. is grateful for PhD grant BES2017-080020 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. M.N.R.’s work was financed by grant PID2019-104272RB-C52/PRE2020-094503 funded by MCIN/AEI/10.13039/501100011033 and by “‘ESF Investing in your future”’. R.A. acknowledges support from EU H2020 “ESTEEM3” (Grant number 823717) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoparticles of poly(3-hexylthiophene): Toward a solvent-independent performance of electrochromic films

  • Canovas Saura, Antonio
  • Colom, E.
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • Maser, Wolfgang K.
  • Benito, Ana M.
6 figures, 2 tables.-- Supplementary information available., Nanoparticles of poly(3-hexylthiophene), P3HT(NP), uniquely enable the preparation of stable dispersions in environmentally-friendly media and thus offer a sustainable liquid phase fabrication of electrochromic device structures. In this work, we assess the electrochromic performance of P3HT(NP) films spray-coated from either tetrahydrofuran (THF)-water or chloroform (CHCl3)-ethanol dispersions on ITO substrates. The nanoparticle films exhibit consistent and reproducible high optical contrast values of around 50 %, t90-switching speeds of about 0.45 s and a cycling stability of approximately 200 cycles for a 20 % performance retention, independent of the solvent being used. Conversely, non-nanostructured P3HT films spray-coated from THF or CHCl3 reveal a strong solvent dependent variability in their electrochromic behavior presenting low optical contrast, high switching speeds and fast degradation rates in the case of CHCl3. The solvent independent electrochromic characteristics of P3HT nanoparticle films is related to a consistent availability of accessible electroactive sites provided by a homogeneous porous P3HT network structure formed on the underlying substrate, as probed by SEM and profilometric studies. Our findings reveal that the use of nanoparticles of P3HT and its environmentally benign liquid phase processing, a concept which is extendable to other electrochromic polymers, opens a sustainable pathway toward the large-area fabrication of electrochromic device structures with favorable and consistent performance parameters., This work was funded by Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN-AEI, Spain) under Grant numbers PID2019-104272RB-C55/AEI/10.13039/501100011033, PID2019-104272RB-C51/AEI/10.13039/501100011033 and TED2021-129609B-I00/MCIN/AEI/10.13039/501100011033 (co-funded by European Union NextGenerationEU/PRTR). A.C-S acknowledges financial support from UPCT-Banco Santander through a research grant (“Iniciación en investigacion” Program 2021). W.M. and A.M.B acknowledge financial support from Gobierno de Aragon (DGA) under project “Grupos de Investigación Reconocidos” T03_23R. E.C. is grateful for his PhD grant from MINECO (FPI BES2017-080020) and associated European Social Funds (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: From ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González Martínez, Juan F.
  • Urbina, Antonio
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
5 figures, 1 table.-- Under a Creative Commons license CC-BY 4.0., Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., This study received financial support from Spanish MICINN under projects PID2019-104272RB-C51, C55AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_23R (Grupo Reconocido), and Fundación Séneca (Región de Murcia, Spain; Reference: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021–130334B-I00., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Graphene oxide: key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, E.
  • Hernández-Ferrer, J.
  • Galán-González, A.
  • Ansón-Casaos, A.
  • Navarro-Rodríguez, M.
  • Palacios-Lidón, E.
  • Colchero, J.
  • Padilla, J.
  • Urbina, A.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs–GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs–GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs–GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs–GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Sustainability of photovoltaic technologies in future net-zero emissions scenarios

  • Urbina Yeregui, Antonio
Photovoltaic installed cumulative capacity reached 849.5 GW worldwide at the end of 2021, and it is expected to rise to 5 TW by 2030. The sustainability of this massive deployment of photovoltaic modules is analysed in this article. A literature review, completed with our own research for emerging technologies has been carried out following life cycle assessment (LCA) methodology complying with ISO 14040 and ISO 14044 standards. Different impact categories have been analysed for five commercial photovoltaic technologies comprising more than 99% of current market (crystalline silicon ~94% and thin film ~6%) and a representative of an emerging technology (hybrid perovskite). By using data from LCA inventories, a quantitative result for 15 impact categories has been calculated at midpoint and then aggregated in four endpoint categories of damage following ReCiPe pathways (global warming potential, human health damage, ecosystems damage and resources depletion) in order to enable a comparison to other renewable, fossil fuel and nuclear electricity production. In all categories, solar electricity has much lower impacts than fossil fuel electricity. This information is complemented with an analysis of the production of minerals with data from the British Geological Survey; the ratio of world production to photovoltaic demand is calculated for 2019 and projected to 2030, thus quantifying the potential risks arising from silver scarcity for c-Si technology, from tellurium for CdTe technology and from indium for CIGS and organic or hybrid emerging technologies. Mineral scarcity may pose some risk for CdTe and CIGS technologies, while c-Si based technology is only affected by silver dependence that can be avoided with other metals replacement for electrodes. When the risks grow higher, investment in recycling should boost the recovery ratio of minerals and other components from PV module waste., Funding from Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033, Spain) (Grant PID2019-104272RB-C55), FEDER Funds and Ministerio de Ciencia e Innovación is acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Accurate thermal prediction model for building-integrated photovoltaics systems using guided artificial intelligence algorithms

  • Serrano-Luján, Lucía
  • Toledo, Carlos
  • Colmenar, José Manuel
  • Abad, José
  • Urbina Yeregui, Antonio
Progress in development of building-integrated photovoltaic systems is still hindered by the complexity of the physics and materials properties of the photovoltaic (PV) modules and its effect on the thermal behavior of the building. This affects not only the energy generation, as its active function and linked to economic feasibility, but also the thermal insulation of the building as part of the structure's skin. Traditional modeling methods currently presents limitations, including the fact that they do not account for material thermal inertia and that the proposed semi-empirical coefficients do not define all types of technologies, mounting configuration, or climatic conditions. This article presents an artificial intelligence-based approach for predicting the temperature of a poly-crystalline silicon PV module based on local outdoor weather conditions (ambient temperature, solar irradiation, relative outdoor humidity and wind speed) and indoor comfort parameters (indoor temperature and indoor relative humidity) as inputs. A combination of two algorithms (Grammatical Evolution and Differential Evolution) guides to the creation of a customized expression based on the Sandia model. Different data-sets for a fully integrated PV system were tested to demonstrate its performance on three different types of days: sunny, cloudy and diffuse, showing relative errors of less than 4% in all cases and including night time. In comparison to Sandia model, this method reduces the error by up to 11% in conditions of variability of sky over short time intervals (cloudy days)., This work was supported by Project PID2019-104272RB-C55, funded by Agencia Estatal de Investigación (AEI-MICINN, Spain, including FEDER funds); Spanish MCIU/AEI/FEDER, UE, under grant ref. PGC2018-095322-B-C22; and Comunidad de Madrid Fondos Estructurales de la Unión Europea with grant ref. P2018/TCS-4566. Carlos Toledo is grateful for postdoctoral fellowship 21227/PD/19, Fundación Séneca - Región de Murcia (Spain).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: from ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González-Martínez, Juan F.
  • Urbina Yeregui, Antonio
  • Álvarez-Sánchez, Miguel A.
  • González-Domínguez, José M.
  • García-Bordejé, Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., Financial support from Spanish MICINN under projects PID2019-104272RB-C51-, C55-AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_20R (Grupo Reconocido) and Fundación Séneca (Región de Murcia, Spain; Ref: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021-130334B-I00
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Graphene oxide: key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, Eduardo
  • Hernández-Ferrer, Javier
  • Galán-González, Alejandro
  • Ansón-Casaos, Alejandro
  • Navarro-Rodríguez, Mario
  • Palacios-Lidón, Elisa
  • Colchero, Jaime
  • Padilla, Javier
  • Urbina Yeregui, Antonio
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs-GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs-GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs-GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs-GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles., This work was funded by Spanish MCIN/AEI/10.13039/501100011033 under projects PID2019-104272RB-C51, PID2019-104272RB-C52, PID2019-104272RB-C55, and PID2019-104739GB-100. Financial support from Gobierno de Aragon (DGA) under project “Grupos Consolidados” T03_20R is acknowledged. E.C. is grateful for PhD grant BES2017-080020 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investingin your future”. M.N.R.’s work was financed by grant PID2019-104272RB-C52/PRE2020-094503 funded by MCIN/AEI/10.13039/501100011033 and by “‘ESF Investingin your future”’. R.A. acknowledge ssupport from EU H2020“ESTEEM3”(Grant number 823717)and Graphene Flagship (881603).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Nanoparticles of poly(3-hexylthiophene): toward a solvent-independent performance of electrochromic films

  • Cánovas-Saura, Antonio
  • Colom, Eduardo
  • Padilla, Javier
  • Urbina Yeregui, Antonio
  • Maser, Wolfgang K.
  • Benito, Ana M.
Nanoparticles of poly(3-hexylthiophene), P3HT(NP), uniquely enable the preparation of stable dispersions in environmentally-friendly media and thus offer a sustainable liquid phase fabrication of electrochromic device structures. In this work, we assess the electrochromic performance of P3HT(NP) films spray-coated from either tetrahydrofuran (THF)-water or chloroform (CHCl3)-ethanol dispersions on ITO substrates. The nanoparticle films exhibit consistent and reproducible high optical contrast values of around 50 %, t90-switching speeds of about 0.45 s and a cycling stability of approximately 200 cycles for a 20 % performance retention, independent of the solvent being used. Conversely, non-nanostructured P3HT films spray-coated from THF or CHCl3 reveal a strong solvent dependent variability in their electrochromic behavior presenting low optical contrast, high switching speeds and fast degradation rates in the case of CHCl3. The solvent independent electrochromic characteristics of P3HT nanoparticle films is related to a consistent availability of accessible electroactive sites provided by a homogeneous porous P3HT network structure formed on the underlying substrate, as probed by SEM and profilometric studies. Our findings reveal that the use of nanoparticles of P3HT and its environmentally benign liquid phase processing, a concept which is extendable to other electrochromic polymers, opens a sustainable pathway toward the large-area fabrication of electrochromic device structures with favorable and consistent performance parameters., This work was funded by Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN-AEI, Spain) under Grant numbers PID2019-104272RB-C55/AEI/10.13039/501100011033, PID2019-104272RB-C51/AEI/10.13039/501100011033 and TED2021-129609B-I00/MCIN/AEI/10.13039/501100011033 (co-funded by European Union NextGenerationEU/PRTR). A.C-S acknowledges financial support from UPCT-Banco Santander through a research grant (“Iniciación en investigacion” Program 2021). W.M. and A.M.B acknowledge financial support from Gobierno de Aragon (DGA) under project “Grupos de Investigación Reconocidos” T03_23R. E.C. is grateful for his PhD grant from MINECO (FPI BES2017-080020) and associated European Social Funds (ESF).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Passive heating and cooling of photovoltaic greenhouses including thermochromic materials

  • Padilla, Javier
  • Toledo, Carlos
  • López-Vicente, Rodolfo
  • Montoya, Raquel
  • Navarro, José-Ramón
  • Abad, José
  • Urbina Yeregui, Antonio
The integration of photovoltaic technologies into greenhouse envelopes appears to be an innovative and environmentally-friendly way to supply their various energy demands. However, the effect on the inner growing conditions, especially on the temperature, must be assessed in order to effectively implement this solution. In this study, experimental temperature data were obtained over two years for four structures built with different photovoltaic technologies (mono-crystalline silicon, amorphous silicon, cadmium telluride, and an organic polymeric technology) and fitted to a thermal model in order to provide a comprehensive analysis of their potential utilization as a cover material in greenhouses. Additionally, the thermal effect of color in structures composed of several common construction materials (brick, wood, plasterboard and glass) was quantified and modelled, supplementing the thermal analysis of passive solutions for this application. In all cases, inner and ambient temperature differences of up to +20 °C, created by a passive heating effect during the day, and – 5 °C, created by a passive cooling effect during the night, have been observed, suggesting the use of the photovoltaic modules with different degrees of structure coverage, complemented with the color tuning of the modules themselves as passive methods to control the temperature and light spectrum of greenhouses., This work was supported by Project ENE2016-79282-C5-5-R, funded by MINECO-Spain; by Project PID2019-104272RB-C55, funded by Agencia Estatal de Investigación (AEI-MICINN, Spain); and by Project 19882-GERM-15, funded by F. Séneca (Región de Murcia, Spain), all including European Commission FEDER funds. C.T. is grateful to F. Séneca (Región de Murcia, Spain) for postdoctoral grant Ref: 21227/PD/19
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A 2D copper-imidazolate framework without thermal treatment as an efficient ORR electrocatalyst for Zn-air batteries

  • Franco, Ana
  • Salatti-Dorado, José Ángel
  • García-Caballero, Valentín
  • Lorca, Sebastián
  • Camacho, Luis
  • Cano, Manuel
  • Fernández- Romero, Antonio J.
  • Delgado Jaén, Juan José
  • Giner-Casares, Juan J.
  • Carrillo-Carrión, Carolina
To face unmet energy demands, the search for more stable, low-cost, and scalable electrocatalyst materials is imperative. Within this context, single-atom catalysts (SACs) have drawn considerable attention due to their maximum atom utilization. With this idea in mind, we have synthesized a new ultrathin and water-stable 2D Cu-based metal-organic framework (2DCIF), which presents a notable electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline media without the need for calcination, which makes the difference when compared to most MOF-based electrocatalysts. The designed MOF-based SAC consists of single-atom sites (isolated and accessible Cu) coordinated to imidazole carboxylic ligands, giving rise to Cu-N4O actives sites confined in a 2D-nanostructured network. This unique structure, along with the ultrathin nanosheets that favor mass transport and electrical conductivity, and the high chemical stability of these 2DCIFs are the key features that endow them with excellent performance in the ORR, which occurs via a direct four-electron transfer pathway, with an onset potential of 0.86 V vs. RHE and a maximum current density of 6.4 mA cm(-2). These good catalytic properties of 2DCIFs have allowed their use as efficient air electrodes in alkaline flooded and all-solid-state Zn-air batteries. In the former case, 2DCIF-based air electrodes presented a specific power density of 91.2 kW cm(-2) kg(-1) and a specific capacity of 296.2 A h g(-1), significantly exceeding the specific capacity values reported previously for other Cu-based catalysts. Besides, the specific capacity increased to 389.1 A h g(-1) when 2DCIFs were tested in an all-solid-state Zn-air battery., C. C.-C. acknowledges the financial support by Spanish Ministry of Science, Innovation and Universities (MICINN) and the Spanish Research Agency (AEI) through the "Ramon y Cajal" programme (RYC-2019-027527-I) and PID2019-107665RJ-I00 project. C. C.-C. also acknowledges funding of the University of Seville through the "VI Plan Propio de Investigacion y Transferencia de la US" (VIPPIT-2020-IV.2). A. F. acknowledges MICINN for an FPI contract associated with CTQ2016-78289-P. J. J. G.-C. also received funding from MICINN and AEI through the PID2020-112744GB-I00/AEI/10.13039/501100011033 project. J. J. D thanks MICINN and the Andalusian Government for funding through projects PID2020-113809RB-C33 and the ELECMIC facilities. A. J. F. R. and S. L. thank MICINN and AEI for funding through the PID2019-104272RB-C55/AEI/10.13039/501100011033 project, and Fundacion Seneca-Agencia de Ciencia y Tecnologia de la Region de Murcia for financial support through the 20985/PI/18 project.