Pasar al contenido principal

IMPACTS AND RECYCLING OF DEVICES FOR ENERGY CONVERSION AND STORAGE: SUSTAINABILITY OF INDUSTRIAL PRODUCTION

PID2019-104272RB-C55

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD POLITÉCNICA DE CARTAGENA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

A 2D copper-imidazolate framework without thermal treatment as an efficient ORR electrocatalyst for Zn-air batteries

  • Franco, Ana
  • Salatti-Dorado, José Ángel
  • García-Caballero, Valentín
  • Lorca, Sebastián
  • Camacho, Luis
  • Cano, Manuel
  • Fernández- Romero, Antonio J.
  • Delgado Jaén, Juan José
  • Giner-Casares, Juan J.
  • Carrillo-Carrión, Carolina
To face unmet energy demands, the search for more stable, low-cost, and scalable electrocatalyst materials is imperative. Within this context, single-atom catalysts (SACs) have drawn considerable attention due to their maximum atom utilization. With this idea in mind, we have synthesized a new ultrathin and water-stable 2D Cu-based metal-organic framework (2DCIF), which presents a notable electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline media without the need for calcination, which makes the difference when compared to most MOF-based electrocatalysts. The designed MOF-based SAC consists of single-atom sites (isolated and accessible Cu) coordinated to imidazole carboxylic ligands, giving rise to Cu-N4O actives sites confined in a 2D-nanostructured network. This unique structure, along with the ultrathin nanosheets that favor mass transport and electrical conductivity, and the high chemical stability of these 2DCIFs are the key features that endow them with excellent performance in the ORR, which occurs via a direct four-electron transfer pathway, with an onset potential of 0.86 V vs. RHE and a maximum current density of 6.4 mA cm(-2). These good catalytic properties of 2DCIFs have allowed their use as efficient air electrodes in alkaline flooded and all-solid-state Zn-air batteries. In the former case, 2DCIF-based air electrodes presented a specific power density of 91.2 kW cm(-2) kg(-1) and a specific capacity of 296.2 A h g(-1), significantly exceeding the specific capacity values reported previously for other Cu-based catalysts. Besides, the specific capacity increased to 389.1 A h g(-1) when 2DCIFs were tested in an all-solid-state Zn-air battery., C. C.-C. acknowledges the financial support by Spanish Ministry of Science, Innovation and Universities (MICINN) and the Spanish Research Agency (AEI) through the "Ramon y Cajal" programme (RYC-2019-027527-I) and PID2019-107665RJ-I00 project. C. C.-C. also acknowledges funding of the University of Seville through the "VI Plan Propio de Investigacion y Transferencia de la US" (VIPPIT-2020-IV.2). A. F. acknowledges MICINN for an FPI contract associated with CTQ2016-78289-P. J. J. G.-C. also received funding from MICINN and AEI through the PID2020-112744GB-I00/AEI/10.13039/501100011033 project. J. J. D thanks MICINN and the Andalusian Government for funding through projects PID2020-113809RB-C33 and the ELECMIC facilities. A. J. F. R. and S. L. thank MICINN and AEI for funding through the PID2019-104272RB-C55/AEI/10.13039/501100011033 project, and Fundacion Seneca-Agencia de Ciencia y Tecnologia de la Region de Murcia for financial support through the 20985/PI/18 project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Catalytic activity of MWCNT-based inks synthetized by different methods

  • Lorca, Sebastián
  • Santos, Florencio
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Álvarez Sánchez, Miguel Ángel
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
Abstract of the poster presented at "Current Trends in Electrochemistry", 41st Meeting of the Electrochemistry Group of the Spanish Royal Society of Chemistry and 1st French-Spanish Atelier/Workshop on Electrochemistry, Paris (July 6 - 9, 2021)., Research on new catalyst materials for the oxygen reduction reaction (ORR) is the main goal for many research groups around the world, due to its application in fuel cells and metal/air batteries. ORR mainly occurs by two pathways, in alkaline media, the direct four-electron transfer pathway from O2 to OH- or in a two-steps mechanism, where hydrogen peroxide (HO2-) is formed in the first reaction. On fuel cells and metal air batteries applications, the catalyst must be optimized to get the oxygen reduced directly to water through the 4 electrons mechanism1. Due to high price of the precious metals, new materials are tested to be used as catalyst in ORR. Among them, researchers have focused their attention mainly on metal oxides, perovskites or carbonaceous materials. In this communication, we have studied four carbonaceous-based inks synthetized by ultrasonic or hydrothermal methods2, using a rotating ring-disk electrode (RRDE) (Figure 1.A). The production of HO2- (%HO2-), transferred electrons and others parameters will be analyzed and the results will be discussed in depth. Finally, the inks were used as catalysts in the cathode of a PVA-KOH-based zinc/air batteries to replace the most widely used catalyst to date, MnO2, The authors thank the financial support from Fundación Séneca (Región de Murcia, Spain; Ref: 20985/PI/18 and 19882-GERM-15), Spanish Agencia Estatal de Investigación (PID2019-104272RB-C55/ AEI/10.13039/501100011033 and PID2019-104272RB-C51/AEI/10.13039/501100011033), and Gobierno de Aragón (DGA T03_20R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene oxide: Key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, E.
  • Hernández-Ferrer, Javier
  • Galán, Alejandro
  • Ansón-Casaos, Alejandro
  • Navarro Rodríguez, Mario
  • Palacios-Lidón, E.
  • Colchero, J.
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs–GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs–GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs–GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs–GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles., This work was funded by Spanish MCIN/AEI/10.13039/501100011033 under projects PID2019-104272RB-C51, PID2019-104272RB-C52, PID2019-104272RB-C55, and PID2019-104739GB-I00. Financial support from Gobierno de Aragon (DGA) under project “Grupos Consolidados” T03_20R is acknowledged. E.C. is grateful for PhD grant BES2017-080020 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”. M.N.R.’s work was financed by grant PID2019-104272RB-C52/PRE2020-094503 funded by MCIN/AEI/10.13039/501100011033 and by “‘ESF Investing in your future”’. R.A. acknowledges support from EU H2020 “ESTEEM3” (Grant number 823717) and Graphene Flagship (881603)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanoparticles of poly(3-hexylthiophene): Toward a solvent-independent performance of electrochromic films

  • Canovas Saura, Antonio
  • Colom, E.
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • Maser, Wolfgang K.
  • Benito, Ana M.
6 figures, 2 tables.-- Supplementary information available., Nanoparticles of poly(3-hexylthiophene), P3HT(NP), uniquely enable the preparation of stable dispersions in environmentally-friendly media and thus offer a sustainable liquid phase fabrication of electrochromic device structures. In this work, we assess the electrochromic performance of P3HT(NP) films spray-coated from either tetrahydrofuran (THF)-water or chloroform (CHCl3)-ethanol dispersions on ITO substrates. The nanoparticle films exhibit consistent and reproducible high optical contrast values of around 50 %, t90-switching speeds of about 0.45 s and a cycling stability of approximately 200 cycles for a 20 % performance retention, independent of the solvent being used. Conversely, non-nanostructured P3HT films spray-coated from THF or CHCl3 reveal a strong solvent dependent variability in their electrochromic behavior presenting low optical contrast, high switching speeds and fast degradation rates in the case of CHCl3. The solvent independent electrochromic characteristics of P3HT nanoparticle films is related to a consistent availability of accessible electroactive sites provided by a homogeneous porous P3HT network structure formed on the underlying substrate, as probed by SEM and profilometric studies. Our findings reveal that the use of nanoparticles of P3HT and its environmentally benign liquid phase processing, a concept which is extendable to other electrochromic polymers, opens a sustainable pathway toward the large-area fabrication of electrochromic device structures with favorable and consistent performance parameters., This work was funded by Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN-AEI, Spain) under Grant numbers PID2019-104272RB-C55/AEI/10.13039/501100011033, PID2019-104272RB-C51/AEI/10.13039/501100011033 and TED2021-129609B-I00/MCIN/AEI/10.13039/501100011033 (co-funded by European Union NextGenerationEU/PRTR). A.C-S acknowledges financial support from UPCT-Banco Santander through a research grant (“Iniciación en investigacion” Program 2021). W.M. and A.M.B acknowledge financial support from Gobierno de Aragon (DGA) under project “Grupos de Investigación Reconocidos” T03_23R. E.C. is grateful for his PhD grant from MINECO (FPI BES2017-080020) and associated European Social Funds (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Supplementary data for Nanoparticles of poly(3-hexylthiophene): Toward a solvent-independent performance of electrochromic films [Dataset]

  • Canovas Saura, Antonio
  • Colom, E.
  • Padilla Martínez, Javier
  • Urbina, Antonio
  • Maser, Wolfgang K.
  • Benito, Ana M.
S2. Redox charge density & thickness: Figure S2. Cyclic voltamogramms of the different P3HT film series with different film thicknesses (indicated by different colors) taken at a scan rate of 20 mV/s. A) P3HT-CHCl3 B) P3HT-THF C) P3HT-CHCl3(NP) D) P3HT-THF(NP). Respective figures E), F) ,G) and H) represent the linear relations found between resulting redox charge densities and measured thicknesses (colors of each film thickness according to the corresponding cyclic voltammogram). Redox charge density values in units of mCcm-2 are calculated by the integration of the anodic and cathodic CV curves for each thickness followed by dividing the obtained values by the scan rate and the probed surface area.-- Figure S3. Transmittance values at 520 nm for the P3HT film series taken in their A) oxidized transparent states and B) neutral colored states as a function of the calculated redox charge density. Symbols represent experimental data points. Lines represent the fitted curves according to exponential decay functions. Regression coefficients r2 are indicated for all the film series. The transmittance curve for P3HT-CHCl3 in the neutral state not only shows overall higher transmittance values but also its exponential fitting curve with lowest regression coefficient strongly deviates from the behavior of all the other films. The different and rather poor transmittance behavior reflects the non-continuous island-like coating of the ITO substrate obtained for this sample by the employed spray-coating process, as demonstrated by the SEM and profilometry results in the main manuscript (Figure 5D and 6D, respectively). The poor transmittance behavior of the spray-coated P3HT-CHCl3 sample in the neutral state thus accounts for the largely different contrast behavior compared to the other P3HT samples, with an apparent shift of the optimum contrast range towards rather high, i.e. out-of-range redox charge density values, as a consequence of unsatisfying fitting results.--, Figure S4. Transmittance spectra of a P3HT film in its neutral and oxidized states.-- Figure S5. A) Transmittance vs. time plot a P3HT-THF film. B) Contrast vs. pulse length extracted from the previous data and corresponding fitting function from which τ values can be obtained.-- Figure S6. A) Transmittance vs. time plot for a P3HT-THF film. B) Contrast vs. number of cycles extracted from the previous data and corresponding fitting function from which N80 values can be obtained.-- Figure S7. Characterization of spin-coated P3HT films deposited from chloroform. A) SEM image obtained at 30 kX magnification (scale bar 200 nm). B) Profilometry of a representative film with average thickness of 77 nm. C) Transmittance in transparent and colored states, together with resulting contrast, versus redox charge density. D) Switching speeds, represented by t90 values versus redox charge density. E) Cycling stability, represented by the number of cycles corresponding to a 20 % loss of the initial contrast value, i.e. N80 value. F) Images of delaminated films after cycling stability tests. Table S1. Electrochromic performance parameters for spin-coated P3HT-CHCl3 series.--, Under a Creative Commons license BY-NC-ND 4.0., S1. UV-vis absorption spectra. S2. Redox charge density & thickness. S3. Stationary transmittance at 520 nm. S4. Transmittance spectra. S5. Switching speed. S6. Stability test. S7. Spin-coated P3HT-CHCl3 film. References., S1. UV-vis absorption spectra: The UV-vis spectra (Figure S1) of P3HT-THF and CHCl3 solutions show a featureless broad π-π* transition absorption band with its maximum at 445 nm, typical for amorphous P3HT. This band is red-shifted to 510 nm for the nanoparticle polymer P3HT (NP) dispersions. The spectra for these dispersions also show the appearance of peaks at 520 nm, 560 nm, and 620 nm, which indicate the existence of vibronic transitions caused by the internal aggregation of the P3HT chains inside the nanoparticles.[1,2] The acquired aggregate structure with its electronic transitions of the P3HT (NPs) in dispersion is maintained when deposited in the form of films onto substrates.-- S2. Redox charge density & thickness: Figure S2 shows the cyclic voltammograms of the different P3HT film probed for different film thicknesses at a scan rate of 20 mV/s in the potential window from -0.3 to 1.1 V vs. Ag/AgCl reference electrode (RE), calibrated at 0.45 V vs. ferrocene. The surface area exposed to the electrolyte is about 1 cm2.-- S3. Stationary Transmittance: Figure S4 show the stationary transmittance curves of the P3HT film series taken at 520 nm in the oxidized and neutral state as a function of the calculated redox charge densities. Experimental data points are fitted by exponential decay functions. The P3HT film series show similar transmittance curves in the oxidized state (Figure S3A), while those in the neutral state (Figure S3B) exhibit larger deviations. The difference between transmittance values in the oxidized and neutral state then provides the contrast curve as a function of the redox charge density as shown in Figure 2 of the main manuscript.--, S4. Transmittance spectra: Figure S4 shows the transmittance spectra of P3HT-THF film acquired in its neutral and oxidized states, reflecting its magenta and transparent pale blue colors, respectively. The transmittance minimum is obtained at 520 nm for the neutral state and provides the reference value at which maximum contrast, i.e. transmittance differences between the oxidized and neutral state is calculated for the different P3HT film series.-- S5. Switching speed: The switching speed of the P3HT films has been determined following the experimental procedure described in the experimental section of the main manuscript. Here the films are submitted to potential steps of variable pulse lengths of 15, 10, 5, 2, 1, 0.5 and 0.25 s between -0.3 and 1.1 V. A representative case study for a P3HT-THF film is depicted in Figure S5.-- S6. Cycling stability: The cycling stability of the P3HT films has been determined following the experimental procedure described in the experimental section of the main manuscript. Here the films are submitted to a number of potential steps between -0.3 and 1.1 V: 300 cycles of 10 s for each step were applied. A representative case study for a P3HT-THF film is depicted in Figure S6.-- S7. Spin-coated P3HT-CHCl3 film: Spin-coating of non-nanostructured P3HT-CHCl3 dispersions, provides a continuous film coverage of the ITO substrate, as can be seen by SEM (Figure S7A) and the profilometry curve of a representative film with average film thickness of 77 nm (Figure S7B). Therefore, the electrochromic transmittance and contrast behavior at 520 nm (Figure S7C) now shows more consistent results, comparable to those of the spray-coated films of the other P3HT series. This especially refers to the optimum redox charge density and maximum contrast being achieved. Equally, t90 switching speed (Figure S7D), as well as the cycling stability (Figure S7E) in the optimum redox window reveal a behavior close to the ones of the other spray-coated film series. However, the spin-coated P3HT-CHCl3 film is prone to delamination issues (Figure S7F), compromising the mechanical integrity of the film, and thus as well the contact to the underlying substrate. This results in the non-linear enhancement of the t90 switching and the decrease of the cycle stability, beyond the established optimum redox charge densities window, as can be seen in Figure S7D and S7E, respectively. The overall electrochromic performance parameters for the spin-coated P3HT-CHCl3 series are summarized in Table S1., This work was funded by Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN-AEI, Spain) under Grant numbers PID2019-104272RB-C55/AEI/10.13039/501100011033, PID2019-104272RB-C51/AEI/10.13039/501100011033 and TED2021-129609B-I00/MCIN/AEI/10.13039/501100011033 (co-funded by European Union NextGenerationEU/PRTR). A.C-S acknowledges financial support from UPCT-Banco Santander through a research grant (“Iniciación en investigacion” Program 2021). W.M. and A.M.B acknowledge financial support from Gobierno de Aragon (DGA) under project “Grupos de Investigación Reconocidos” T03_23R. E.C. is grateful for his PhD grant from MINECO (FPI BES2017-080020) and associated European Social Funds (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: From ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González Martínez, Juan F.
  • Urbina, Antonio
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
5 figures, 1 table.-- Under a Creative Commons license CC-BY 4.0., Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., This study received financial support from Spanish MICINN under projects PID2019-104272RB-C51, C55AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_23R (Grupo Reconocido), and Fundación Séneca (Región de Murcia, Spain; Reference: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021–130334B-I00., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Graphene oxide: key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, E.
  • Hernández-Ferrer, J.
  • Galán-González, A.
  • Ansón-Casaos, A.
  • Navarro-Rodríguez, M.
  • Palacios-Lidón, E.
  • Colchero, J.
  • Padilla, J.
  • Urbina, A.
  • Arenal, R.
  • Benito, A.M.
  • Maser, W.K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs–GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs–GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs–GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs–GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Sustainability of photovoltaic technologies in future net-zero emissions scenarios

  • Urbina Yeregui, Antonio
Photovoltaic installed cumulative capacity reached 849.5 GW worldwide at the end of 2021, and it is expected to rise to 5 TW by 2030. The sustainability of this massive deployment of photovoltaic modules is analysed in this article. A literature review, completed with our own research for emerging technologies has been carried out following life cycle assessment (LCA) methodology complying with ISO 14040 and ISO 14044 standards. Different impact categories have been analysed for five commercial photovoltaic technologies comprising more than 99% of current market (crystalline silicon ~94% and thin film ~6%) and a representative of an emerging technology (hybrid perovskite). By using data from LCA inventories, a quantitative result for 15 impact categories has been calculated at midpoint and then aggregated in four endpoint categories of damage following ReCiPe pathways (global warming potential, human health damage, ecosystems damage and resources depletion) in order to enable a comparison to other renewable, fossil fuel and nuclear electricity production. In all categories, solar electricity has much lower impacts than fossil fuel electricity. This information is complemented with an analysis of the production of minerals with data from the British Geological Survey; the ratio of world production to photovoltaic demand is calculated for 2019 and projected to 2030, thus quantifying the potential risks arising from silver scarcity for c-Si technology, from tellurium for CdTe technology and from indium for CIGS and organic or hybrid emerging technologies. Mineral scarcity may pose some risk for CdTe and CIGS technologies, while c-Si based technology is only affected by silver dependence that can be avoided with other metals replacement for electrodes. When the risks grow higher, investment in recycling should boost the recovery ratio of minerals and other components from PV module waste., Funding from Agencia Estatal de Investigación (MCIN/AEI/10.13039/501100011033, Spain) (Grant PID2019-104272RB-C55), FEDER Funds and Ministerio de Ciencia e Innovación is acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Accurate thermal prediction model for building-integrated photovoltaics systems using guided artificial intelligence algorithms

  • Serrano-Luján, Lucía
  • Toledo, Carlos
  • Colmenar, José Manuel
  • Abad, José
  • Urbina Yeregui, Antonio
Progress in development of building-integrated photovoltaic systems is still hindered by the complexity of the physics and materials properties of the photovoltaic (PV) modules and its effect on the thermal behavior of the building. This affects not only the energy generation, as its active function and linked to economic feasibility, but also the thermal insulation of the building as part of the structure's skin. Traditional modeling methods currently presents limitations, including the fact that they do not account for material thermal inertia and that the proposed semi-empirical coefficients do not define all types of technologies, mounting configuration, or climatic conditions. This article presents an artificial intelligence-based approach for predicting the temperature of a poly-crystalline silicon PV module based on local outdoor weather conditions (ambient temperature, solar irradiation, relative outdoor humidity and wind speed) and indoor comfort parameters (indoor temperature and indoor relative humidity) as inputs. A combination of two algorithms (Grammatical Evolution and Differential Evolution) guides to the creation of a customized expression based on the Sandia model. Different data-sets for a fully integrated PV system were tested to demonstrate its performance on three different types of days: sunny, cloudy and diffuse, showing relative errors of less than 4% in all cases and including night time. In comparison to Sandia model, this method reduces the error by up to 11% in conditions of variability of sky over short time intervals (cloudy days)., This work was supported by Project PID2019-104272RB-C55, funded by Agencia Estatal de Investigación (AEI-MICINN, Spain, including FEDER funds); Spanish MCIU/AEI/FEDER, UE, under grant ref. PGC2018-095322-B-C22; and Comunidad de Madrid Fondos Estructurales de la Unión Europea with grant ref. P2018/TCS-4566. Carlos Toledo is grateful for postdoctoral fellowship 21227/PD/19, Fundación Séneca - Región de Murcia (Spain).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: from ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González-Martínez, Juan F.
  • Urbina Yeregui, Antonio
  • Álvarez-Sánchez, Miguel A.
  • González-Domínguez, José M.
  • García-Bordejé, Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., Financial support from Spanish MICINN under projects PID2019-104272RB-C51-, C55-AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_20R (Grupo Reconocido) and Fundación Séneca (Región de Murcia, Spain; Ref: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021-130334B-I00
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Graphene oxide: key to efficient charge extraction and suppression of polaronic transport in hybrids with poly (3-hexylthiophene) nanoparticles

  • Colom, Eduardo
  • Hernández-Ferrer, Javier
  • Galán-González, Alejandro
  • Ansón-Casaos, Alejandro
  • Navarro-Rodríguez, Mario
  • Palacios-Lidón, Elisa
  • Colchero, Jaime
  • Padilla, Javier
  • Urbina Yeregui, Antonio
  • Arenal, Raúl
  • Benito, Ana M.
  • Maser, Wolfgang K.
Nanoparticles (NPs) of conjugated polymers in intimate contact with sheets of graphene oxide (GO) constitute a promising class of water-dispersible nanohybrid materials of increased interest for the design of sustainable and improved optoelectronic thin-film devices, revealing properties exclusively pre-established upon their liquid-phase synthesis. In this context, we report for the first time the preparation of a P3HTNPs-GO nanohybrid employing a miniemulsion synthesis approach, whereby GO sheets dispersed in the aqueous phase serve as a surfactant. We show that this process uniquely favors a quinoid-like conformation of the P3HT chains of the resulting NPs well located onto individual GO sheets. The accompanied change in the electronic behavior of these P3HTNPs, consistently confirmed by the photoluminescence and Raman response of the hybrid in the liquid and solid states, respectively, as well as by the properties of the surface potential of isolated individual P3HTNPs-GO nano-objects, facilitates unprecedented charge transfer interactions between the two constituents. While the electrochemical performance of nanohybrid films is featured by fast charge transfer processes, compared to those taking place in pure P3HTNPs films, the loss of electrochromic effects in P3HTNPs-GO films additionally indicates the unusual suppression of polaronic charge transport processes typically encountered in P3HT. Thus, the established interface interactions in the P3HTNPs-GO hybrid enable a direct and highly efficient charge extraction channel via GO sheets. These findings are of relevance for the sustainable design of novel high-performance optoelectronic device structures based on water-dispersible conjugated polymer nanoparticles., This work was funded by Spanish MCIN/AEI/10.13039/501100011033 under projects PID2019-104272RB-C51, PID2019-104272RB-C52, PID2019-104272RB-C55, and PID2019-104739GB-100. Financial support from Gobierno de Aragon (DGA) under project “Grupos Consolidados” T03_20R is acknowledged. E.C. is grateful for PhD grant BES2017-080020 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investingin your future”. M.N.R.’s work was financed by grant PID2019-104272RB-C52/PRE2020-094503 funded by MCIN/AEI/10.13039/501100011033 and by “‘ESF Investingin your future”’. R.A. acknowledge ssupport from EU H2020“ESTEEM3”(Grant number 823717)and Graphene Flagship (881603).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Nanoparticles of poly(3-hexylthiophene): toward a solvent-independent performance of electrochromic films

  • Cánovas-Saura, Antonio
  • Colom, Eduardo
  • Padilla, Javier
  • Urbina Yeregui, Antonio
  • Maser, Wolfgang K.
  • Benito, Ana M.
Nanoparticles of poly(3-hexylthiophene), P3HT(NP), uniquely enable the preparation of stable dispersions in environmentally-friendly media and thus offer a sustainable liquid phase fabrication of electrochromic device structures. In this work, we assess the electrochromic performance of P3HT(NP) films spray-coated from either tetrahydrofuran (THF)-water or chloroform (CHCl3)-ethanol dispersions on ITO substrates. The nanoparticle films exhibit consistent and reproducible high optical contrast values of around 50 %, t90-switching speeds of about 0.45 s and a cycling stability of approximately 200 cycles for a 20 % performance retention, independent of the solvent being used. Conversely, non-nanostructured P3HT films spray-coated from THF or CHCl3 reveal a strong solvent dependent variability in their electrochromic behavior presenting low optical contrast, high switching speeds and fast degradation rates in the case of CHCl3. The solvent independent electrochromic characteristics of P3HT nanoparticle films is related to a consistent availability of accessible electroactive sites provided by a homogeneous porous P3HT network structure formed on the underlying substrate, as probed by SEM and profilometric studies. Our findings reveal that the use of nanoparticles of P3HT and its environmentally benign liquid phase processing, a concept which is extendable to other electrochromic polymers, opens a sustainable pathway toward the large-area fabrication of electrochromic device structures with favorable and consistent performance parameters., This work was funded by Ministerio de Ciencia e Innovación-Agencia Estatal de Investigación (MCIN-AEI, Spain) under Grant numbers PID2019-104272RB-C55/AEI/10.13039/501100011033, PID2019-104272RB-C51/AEI/10.13039/501100011033 and TED2021-129609B-I00/MCIN/AEI/10.13039/501100011033 (co-funded by European Union NextGenerationEU/PRTR). A.C-S acknowledges financial support from UPCT-Banco Santander through a research grant (“Iniciación en investigacion” Program 2021). W.M. and A.M.B acknowledge financial support from Gobierno de Aragon (DGA) under project “Grupos de Investigación Reconocidos” T03_23R. E.C. is grateful for his PhD grant from MINECO (FPI BES2017-080020) and associated European Social Funds (ESF).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Passive heating and cooling of photovoltaic greenhouses including thermochromic materials

  • Padilla, Javier
  • Toledo, Carlos
  • López-Vicente, Rodolfo
  • Montoya, Raquel
  • Navarro, José-Ramón
  • Abad, José
  • Urbina Yeregui, Antonio
The integration of photovoltaic technologies into greenhouse envelopes appears to be an innovative and environmentally-friendly way to supply their various energy demands. However, the effect on the inner growing conditions, especially on the temperature, must be assessed in order to effectively implement this solution. In this study, experimental temperature data were obtained over two years for four structures built with different photovoltaic technologies (mono-crystalline silicon, amorphous silicon, cadmium telluride, and an organic polymeric technology) and fitted to a thermal model in order to provide a comprehensive analysis of their potential utilization as a cover material in greenhouses. Additionally, the thermal effect of color in structures composed of several common construction materials (brick, wood, plasterboard and glass) was quantified and modelled, supplementing the thermal analysis of passive solutions for this application. In all cases, inner and ambient temperature differences of up to +20 °C, created by a passive heating effect during the day, and – 5 °C, created by a passive cooling effect during the night, have been observed, suggesting the use of the photovoltaic modules with different degrees of structure coverage, complemented with the color tuning of the modules themselves as passive methods to control the temperature and light spectrum of greenhouses., This work was supported by Project ENE2016-79282-C5-5-R, funded by MINECO-Spain; by Project PID2019-104272RB-C55, funded by Agencia Estatal de Investigación (AEI-MICINN, Spain); and by Project 19882-GERM-15, funded by F. Séneca (Región de Murcia, Spain), all including European Commission FEDER funds. C.T. is grateful to F. Séneca (Región de Murcia, Spain) for postdoctoral grant Ref: 21227/PD/19