Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: From ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González Martínez, Juan F.
  • Urbina, Antonio
  • Álvarez Sánchez, Miguel Ángel
  • González Domínguez, José Miguel
  • García-Bordejé, José Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
5 figures, 1 table.-- Under a Creative Commons license CC-BY 4.0., Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., This study received financial support from Spanish MICINN under projects PID2019-104272RB-C51, C55AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_23R (Grupo Reconocido), and Fundación Séneca (Región de Murcia, Spain; Reference: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021–130334B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unveiling the effect of paper matrix on the electrochemical response of diffusive redox probes

  • Galyamin, Dmitry
  • Laborda, Eduardo
  • Esquivel Bojórquez, Juan Pablo
  • González, Joaquín
  • Sabaté, Neus
This study evaluates the influence of paper substrate selection on the electrochemical response of an electrochemical paper-based analytical device (ePAD). Various paper substrates commonly employed in this type of devices such as cellulose, nitrocellulose and glass-fibre based medical grade materials are evaluated using chronoamperometric measurements. Both theoretical modelling and experimental analyses are conducted to understand the diffusion behaviour of widely employed two redox probes, [Fe(CN)<inf>6</inf>]<sup>3−</sup> and FcMeOH. Findings show that glass fibre substrates show similar performance to liquid drop conditions while nitrocellulose cause a decrease in current after a short measurement period, mainly due to a thin-layer effect. Cellulose-based substrates decrease the diffusivity of redox species, especially for charged species, indicating potential limitations in their use for chronoamperometric measurements. The study offers valuable insights into the electrochemical behaviour of paper substrates in ePADs, laying the groundwork for future research in this area., The authors thank D. Batet for his help in the SEM inspection of paper substrates. N. Sabat\u00E9 would like to thank the financial support received from the ERC ConsolidatorGrant (SUPERCELL-GA.648518) . E. L. and J. G. greatly appreciate the financial support provided by the Ministerio de Ciencia e Innovaci\u00F3n by MCIN/AEI/10.13039/501100011033 and the European Union \u201CNextGenerationEU\u201D/PRTR\" through the project TED2021\u2013130334B-I00 ., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Metal-free nanostructured-carbon inks for a sustainable fabrication of zinc/air batteries: from ORR activity to a simple prototype

  • Santos, Florencio
  • Lorca, Sebastián
  • González-Martínez, Juan F.
  • Urbina Yeregui, Antonio
  • Álvarez-Sánchez, Miguel A.
  • González-Domínguez, José M.
  • García-Bordejé, Enrique
  • Ansón-Casaos, Alejandro
  • Benito, Ana M.
  • Maser, Wolfgang K.
  • Fernández Romero, Antonio J.
Zinc/air batteries are convenient energy storage devices for both small and massive applications. While future perspectives indicate the need for low-cost components and sustainable fabrication processes, the battery performance is in part controlled by the kinetics of the oxygen reduction reaction (ORR), which typically involves transition metals as catalysts. In this context, we prepare a series of metal-free water-based carbon inks, which are tested for their catalytic performance, once deposited on a gas-diffusion substrate, in the air cathode of a simple battery prototype. The inks contain a variety of well-defined carbon nanomaterials and additives, exhibiting different physicochemical properties that critically influence the interaction with the gas diffusion hydrophobic substrate. The intrinsic ORR catalytic activity of the ink material is also analyzed on a glassy carbon electrode by the rotating ring-disc electrode (RRDE) method and specific capacitance measurements. The discharge capacity on our zinc/air battery prototype correlates well with the intrinsic catalytic activity in the RRDE. However, only the activity in the RRDE does not actually assure the performance on the commercial cathode of the prototype, since other chemical compatibility issues play a role. Thus, we highlight the importance of catalyst testing, not only on the RRDE but also under realistic device conditions., Financial support from Spanish MICINN under projects PID2019-104272RB-C51-, C55-AEI/10.13039/501100011033, PID2020-120439-RA-I00, Diputación General de Aragón under project T03_20R (Grupo Reconocido) and Fundación Séneca (Región de Murcia, Spain; Ref: 20985/PI/18). The authors also appreciate the financial support provided by the MICINN and the European Union “NextGenerationEU/PRTR” through the project TED2021-130334B-I00