Pasar al contenido principal

DISPOSITIVOS ASISTIDOS POR TECNICAS DE DEEP Y MACHINE LEARNING PARA TRANSCEPTORES DE RADIOFRECUENCIA ALTAMENTE EFICIENTES

PID2020-113832RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Fast analysis and optimization of sparsely distributed partial modification problems

  • Fang, Xiaoxing
  • Heldring, Alexander|||0000-0003-2011-2096
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
  • Cao, Qunsheng
This article addresses the efficient numerical analysis of sparsely distributed small modifications in a large structure, that is, the sparsely distributed partial modification problem (SDPMP). A hierarchical matrix (H-matrix)-based fast direct solver is adopted to solve the SDPMP in a very short time for each new set of modifications. The main idea of this method is to reuse the parts of the compressed inverse matrix operator that do not change and only recompute the modified parts. In contrast with already existing algorithms designed to tackle a single localized modification, this new approach is still very fast for sparsely distributed small modifications, so it becomes a very attractive option to solve optimization problems efficiently, due to the very cheap analysis of the modified structure at each iteration of the optimization procedure. The efficiency of the solution of SDPMP is demonstrated for several cases involving passive and active metasurfaces and a reconfigurable antenna. As a practical example, a programmable metasurface reflector is optimized with particle swarm optimization to obtain a prescribed reflection pattern., This work was supported in part by the National Nature Science Foundation of China under Grant 61871219; in part by the China Scholarship Council under Grant 201906830042; in part by the Startup Foundation for Introducing Talent of the Nanjing University of Information Science and Technology (NUIST) under Grant 2022r079; in part by the Ministerio de Ciencia e Innovacion (MICINN) under Project PID2019- 107885GB-C31/AEI/10.13039/501100011033, Project PID2020-113832RBC21/AEI/10.13039/501100011033, and Project TEC2017-84817-C2-2-R/AEI/ 10.13039/501100011033; and in part by the Unidad de Excelencia Maria de Maeztu, which is financed by the Agencia Estatal de Investigación, Spain, under Grant MDM-2016-0600/AEI/10.13039/501100011033; and in part by the Catalan Agency for Management of University and Research Grants (AGAUR) under Research Group under Grant 2017 SGR 219., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Digital linearization of wideband envelope tracking power amplifiers for mobile terminals

  • Li, Wantao|||0000-0002-2634-6742
  • Montoro López, Gabriel|||0000-0002-1328-4175
  • Gilabert Pinal, Pere Lluís|||0000-0001-6183-6977
This article presents a low-complexity linearization method to compensate for multisource nonlinear distortion in wideband envelope tracking (ET) power amplifiers (PAs) for 5G new radio (NR) mobile terminals. The proposed linearization approach consists in an envelope leakage cancellation (ELC) system operating in the dynamic supply path and a 2-D digital predistortion (2-D-DPD) linearizer acting on the baseband complex modulated signal. In a first step, an envelope generalized memory polynomial (EGMP) behavioral model is proposed to compensate for the unwanted radio frequency (RF) leakage that appears at the output of ET modulator (ETM). Then, a baseband 2-D-DPD linearizer based on a slow envelope-dependent generalized memory polynomial (SED-GMP) behavioral model is used to further enhance the linearization performance. The proposed method is validated on a system-on-chip (SoC) ET PA board for mobile applications. The reported experimental results show how the proposed digital linearization approach can mitigate the linearity and efficiency trade-off in ET PAs. Consequently, the out-of-band linearity requirement of - 36 dBc of adjacent channel power ratio (ACPR) is met for 5G-NR test signals with bandwidths ranging from 60 to 200 MHz at 2.55 GHz (band B41), with an overall ET PA power efficiency ranging from 10.1 % and up to 16.5 % , depending on the signal bandwidth., The work in this paper was funded by Huawei Technologies from July 2020 to August 2021; and supported in part by the project PID2020-113832RB-C21 funded by MCIN/AEI/10.13039/50110001103 and in part by the Government of Catalonia and the European Social Fund under Grant 2021-FI-B-137. This paper is an expanded version from the IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR), Las Vegas, NV, USA, January 2022., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A scalable bandwidth and frequency-dependent DPD linearizer for user equipment power amplifiers with nonflat frequency response

  • Li, Wantao|||0000-0002-2634-6742
  • Guo, Yan
  • Montoro López, Gabriel|||0000-0002-1328-4175
  • Gilabert Pinal, Pere Lluís|||0000-0001-6183-6977
This article presents a scalable digital predistortion (DPD) linearizer for handset power amplifiers (PAs) with nonflat frequency response and assuming a 5G scenario with dynamic resource blocks (RBs) reallocation. The scalable DPD model is designed to be both bandwidth and frequency-dependent, including some design constraints targeting a resource-efficient hardware implementation. In order to extract the most relevant basis functions that better trade-off the linearization performance and the required resources of a hardware implementation of the DPD, a feature selection technique based on a constrained version of the doubly orthogonal matching pursuit (DOMP) is proposed. The linearization performance of the proposed DPD method is evaluated on a PA system-on-chip (SoC), considering 5G new radio (NR) signals at different frequency locations and with different bandwidths within a 100 MHz channel., This work was supported in part by Huawei Technologies from July 2022 to August 2023, in part by the Ministerio de Ciencia e Innovación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/50110001103 under Project PID2020-113832RB-C21, in part by the Government of Catalonia, and in part by the European Social Fund under Grant 2021-FI-B-137., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

GPU versus FPGA implementation of a digital predistortion linearizer for wideband radiofrequency power amplifiers

  • Li, Wantao|||0000-0002-2634-6742
  • Montoro López, Gabriel|||0000-0002-1328-4175
  • Gilabert Pinal, Pere Lluís|||0000-0001-6183-6977
This paper presents and compares the implementation of a digital predistortion (DPD) linearizer for radiofrequency power amplifiers (PAs) considering two different hardware acceleration platforms. Both graphics processing unit (GPU)-based and field programmable gate arrays (FPGA)-based implementations of the DPD are capable to meet the high throughput requirements for linearizing the PA with current 5G new radio (NR) wideband signals. A comparison in terms of hardware resources usage, precision, throughput and linearization performance is provided for both GPU and FPGA implementations of a DPD based on the generalized memory polynomial (GMP) behavioral model., The authors would like to thank K. Chuang and W. Thomson from Analog Devices for providing the SLMBA used in this paper. This work was supported in part by the Ministerio de Ciencia e Innovación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/5011000 1103 under Project PID2020-113832RB-C21, in part by the Government of Catalonia, and in part by the European Social Fund under Grant 2021-FI-B-137., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Quasi-3D model for lateral resonances on homogeneous BAW resonators

  • Udaondo Guerrero, Carlos|||0000-0002-4251-0530
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
Lateral modes are responsible for the in-band spurious resonances that appear on BAW resonators, degrading the in-band filter response. In this work, a fast computational method based on the transmission line matrix (TLM) method is employed to model the lateral resonances of BAW resonators. Using the precomputed dispersion curves of Lamb waves and an equivalent characteristic impedance for the TE1 mode, a network of transmission lines is used to calculate the magnitude of field distributions on the electrodes. These characteristics are specific to the stack layer configuration. The model’s implementation is based on nodal Y matrices, from which particle displacement profiles are coupled to the electric domain via piezoelectric constitutive relations. Consequently, the input impedance of the resonator is obtained. The model exhibits strong agreement with FEM simulations of FBARs and SMRs, and with measurements of several SMRs. The proposed model can provide accurate predictions of resonator input impedance, which is around 200 times faster than conventional FEM., This research was funded by the Catalan Government under Grant 2017 SGR 813, by Spanish Government under Grant PID2020-118410RB-C21 and Grant PID2020-113832RB-C21, and by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through Grant 2020 FI_B-00967., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adaptive digital predistortion, user equipment power amplifiers, dynamic frequency variation, bandwidth variation, VSWR variation

  • Gilabert Pinal, Pere Lluís|||0000-0001-6183-6977
  • Montoro López, Gabriel|||0000-0002-1328-4175
  • Li, Wantao|||0000-0002-2634-6742
This work was supported in part by Huawei Technologies from July 2023 to August 2024, in part by MCIN/AEI/10.13039/50110001103 under Project PID2020-113832RB-C21, in part by MICIU/AEI/ 10.13039/501100011033/FEDER, UE, under project PID2023-146245OB- C21, in part by the Government of Catalonia, and in part by the European Social Fund under Grant 2021-FI-B-137., This paper presents an adaptive digital predistortion (DPD) linearizer for user equipment (UE) power amplifiers (PAs) assuming a realistic 5G scenario with dynamic frequency and signal bandwidth reallocation and frequent voltage standing wave ratio (VSWR) variations. The DPD model is composed of a well-matched DPD model and an adaptive mismatched DPD model. The well-matched model is scalable and bandwidth- and frequency-dependent. For every frequency and bandwidth of interest, it provides the best trade-off between computational complexity and linearization performance, optimized for the PA operating under well-matched condition. We demonstrate that a proper well-matched DPD model can also reduce the complexity and challenges associated with the mismatched DPD model. To address the uncertain behavior of PA mismatching, the mismatched DPD model is designed to be simple and adaptable. It includes a finite impulse response (FIR) filter with two memory taps to compensate for the reflected wave and a memoryless AM-AM and AM-PM nonlinear model to handle changes in the nonlinear behavior. The linearization performance is evaluated on a PA system-on-chip (SoC), considering 5G new radio signals at different frequency locations and with different signal bandwidths, i.e., ranging from 5 MHz to 100 MHz contiguous bandwidth along a 300 MHz channel around a center frequency of 3.65 GHz. Experimental robustness tests show the benefits of the proposed method, allowing the adaptation to be conducted less frequently or only on-demand while always meeting the linearization specifications., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Agnostic envelope linearization of dynamically supplied power amplifiers for mobile terminals

  • Li, Wantao|||0000-0002-2634-6742
  • Montoro López, Gabriel|||0000-0002-1328-4175
  • Gilabert Pinal, Pere Lluís|||0000-0001-6183-6977
This paper presents an envelope linearization technique to compensate for the nonlinear distortion of envelope tracking (ET) power amplifiers (PAs) for 5G new radio (NR) mobile terminals. The proposed envelope optimization (EOPT) method is agnostic of the nonlinear distortion generated in the envelope supply path and can compensate for the nonlinear distortion at the ET PA output without the need to monitor the output at the envelope tracking modulator (ETM). The linearization system in the envelope path is based on the envelope generalized memory polynomial (EGMP) behavioral model. Since the ETM output is not available, an iterative nonlinear least squares solution inspired in the deep deterministic policy gradient (DDPG) algorithm is proposed to extract the coefficients of the EGMP model. The EOPT method is validated on a system-on-chip (SoC) ET PA board designed for mobile terminal applications. Experimental results show the suitability of the proposed method to guarantee the linearity requirements (i.e., adjacent channel power ratio below -36 dBc) with 16.8% of power efficiency when operating the ET PA with 5G new radio test signals of 60 MHz bandwidth operating at 2.55 GHz (band 7). The linearization performance of the proposed EOPT method is comparable to the envelope leakage cancellation (ELC) approach (but saving the need for an analog to digital converter to monitor the ETM output), and can outperform a conventional I-Q digital predistorter based on the generalized memory polynomial (GMP) behavioral model., This research was funded by Huawei Technologies from July 2020 to August 2021; and supported in part by the project PID2020-113832RB-C21 funded by MCIN/AEI/10.13039/50110001103 and in part by the Government of Catalonia and the European Social Fund under Grant 2021-FI-B-137., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Digital predistortion linearization of a GaN HEMT push-pull power amplifier for cable applications with high fractional bandwidth

  • Gilabert Pinal, Pere Lluís|||0000-0001-6183-6977
  • Pérez-Cisneros, José Ramón
  • Ren, Zhixiong
  • Montoro López, Gabriel|||0000-0002-1328-4175
  • Ruiz Lavin, Maria de las Nieves
  • García García, José Ángel
This paper presents two linearization strategies for a custom-designed wideband push-pull (PP) power amplifier (PA) for wired communication applications such as, for example, cable TV. Two digital predistortion (DPD) behavioral models are proposed to meet the in-band and out-of-band linearity requirements when efficiently amplifying wideband DOCSIS signals with high fractional bandwidth (FBW). A radiofrequency (RF) DPD linearizer based on a band-pass generalized memory polynomial (BP-GMP) behavioral model and a baseband (BB) I-Q DPD linearizer based on a harmonic distortion GMP (HD-GMP) behavioral model are proposed. Both DPD models take into account the harmonic distortion typical of high FBW amplification. Experimental results will show high efficient and linear amplification of a 4 × 192 MHz composite DOCSIS signal by properly combining a crest factor reduction (CFR) technique and the proposed DPD strategies., The work in this paper was funded by Huawei Technologies from March 2017 to April 2019; and supported in part by the project PID2020-113832RB- C21 funded by MCIN/AEI/10.13039/50110001103., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Training data selection and dimensionality reduction for polynomial and artificial neural network MIMO adaptive digital predistortion

  • López Bueno, David|||0000-0002-9005-0532
  • Montoro López, Gabriel|||0000-0002-1328-4175
  • Gilabert Pinal, Pere Lluís|||0000-0001-6183-6977
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In 5G and beyond radios, the increased bandwidth, the fast-changing waveform scenarios, and the operation of large array multiple-input multiple-output (MIMO) transmitter architectures have challenged both the polynomial and the artificial neural network (ANN) MIMO adaptive digital predistortion (DPD) schemes. This article proposes training data selection methods and dimensionality reduction techniques that can be combined to enable relevant reductions of the DPD training time and the implementation complexity for MIMO transmitter architectures. In this work, the combination of an efficient uncorrelated equation selection (UES) mechanism together with orthogonal least squares (OLS) is proposed to reduce the training data length and the number of basis functions at every behavioral modeling matrix in the polynomial MIMO DPD scheme. For ANN MIMO DPD architectures, applying UES and principal component analysis (PCA) is proposed to reduce the input dataset length and features, respectively. The UES-OLS and the UES-PCA techniques are experimentally validated for a 2×2 MIMO test setup with strong power amplifier (PA) input and output crosstalk., This work was supported in part by the MCIN/AEI/10.13039/501100011033 under Project PID2020-113832RB-C22 and Project PID2020-113832RB-C21; and in part by the European Union-NextGenerationEU through the Spanish Recovery, Transformation and Resilience Plan, under Project TSI-063000-2021-121 (MINECO UNICO Programme)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Distributed nonlinear model and fast analysis for in-band IMD3 prediction of surface acoustic wave resonators

  • González Rodríguez, Marta|||0000-0001-7922-2674
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • González Arbesú, José María|||0000-0002-9601-0988
  • Huebner, Sebatian
The motivation of this work is to analyze the in-band intermodulation distortion (IMD) occurring in surface acoustic wave (SAW) devices, using a recently developed fast method based on the input–output equivalent sources (IOES). The method calculates the equivalent current sources of a given harmonic (H) or IMD, which when applied at the boundaries of any uniform nonlinear region produce the same nonlinearities as the full distributed circuit. The accuracy of the method is validated with a very simplified SAW resonator with ten digits, which is modeled by a discretized Mason-based circuit. The IOES method provides equal results to the ones obtained through harmonic balance (HB) simulations, performed by means of commercial software, being the first 1000 times faster. Once the accuracy of the method is guaranteed, it is used to analyze the measured in-band IMD3 of several lithium tantalite 42° cut leaky SAW (LSAW) resonators with different pitches and duty factors at the B66 long term evolution (LTE) frequency band. Those resonators are comprised of 100 and 20 electrode pairs for the active region and each of the reflectors, respectively, which implies the analysis of a very large distributed nonlinear problem with thousands of nonlinear local sources. The IOES method takes 35.4 s in simulating 51 frequency points, whereas this simulation is not possible using a commercial HB simulator on a general-purpose computer., This work was supported in part by the Spanish Gov. through grants PID2020-118410RB-C21 and PID2020-113832RB-C21 funded by MCIN/AEI/10.13039/50110001103 and by the Catalan Gov. under grant 2017 SGR-813., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adaptive digital predistortion; user equipment power amplifiers; dynamic frequency variation; bandwidth variation; VSWR variation

  • Gilabert Pinal, Pere Lluís
  • Montoro López, Gabriel
  • Li, Wantao
This work was supported in part by Huawei Technologies from July 2023 to August 2024, in part by MCIN/AEI/10.13039/50110001103 under Project PID2020-113832RB-C21, in part by MICIU/AEI/ 10.13039/501100011033/FEDER, UE, under project PID2023-146245OB- C21, in part by the Government of Catalonia, and in part by the European Social Fund under Grant 2021-FI-B-137., This paper presents an adaptive digital predistortion (DPD) linearizer for user equipment (UE) power amplifiers (PAs) assuming a realistic 5G scenario with dynamic frequency and signal bandwidth reallocation and frequent voltage standing wave ratio (VSWR) variations. The DPD model is composed of a well-matched DPD model and an adaptive mismatched DPD model. The well-matched model is scalable and bandwidth- and frequency-dependent. For every frequency and bandwidth of interest, it provides the best trade-off between computational complexity and linearization performance, optimized for the PA operating under well-matched condition. We demonstrate that a proper well-matched DPD model can also reduce the complexity and challenges associated with the mismatched DPD model. To address the uncertain behavior of PA mismatching, the mismatched DPD model is designed to be simple and adaptable. It includes a finite impulse response (FIR) filter with two memory taps to compensate for the reflected wave and a memoryless AM-AM and AM-PM nonlinear model to handle changes in the nonlinear behavior. The linearization performance is evaluated on a PA system-on-chip (SoC), considering 5G new radio signals at different frequency locations and with different signal bandwidths, i.e., ranging from 5 MHz to 100 MHz contiguous bandwidth along a 300 MHz channel around a center frequency of 3.65 GHz. Experimental robustness tests show the benefits of the proposed method, allowing the adaptation to be conducted less frequently or only on-demand while always meeting the linearization specifications., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

GPU versus FPGA implementation of a digital predistortion linearizer for wideband radiofrequency power amplifiers

  • Li, Wantao
  • Montoro López, Gabriel
  • Gilabert Pinal, Pere Lluís
This paper presents and compares the implementation of a digital predistortion (DPD) linearizer for radiofrequency power amplifiers (PAs) considering two different hardware acceleration platforms. Both graphics processing unit (GPU)-based and field programmable gate arrays (FPGA)-based implementations of the DPD are capable to meet the high throughput requirements for linearizing the PA with current 5G new radio (NR) wideband signals. A comparison in terms of hardware resources usage, precision, throughput and linearization performance is provided for both GPU and FPGA implementations of a DPD based on the generalized memory polynomial (GMP) behavioral model., The authors would like to thank K. Chuang and W. Thomson from Analog Devices for providing the SLMBA used in this paper. This work was supported in part by the Ministerio de Ciencia e Innovación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/5011000 1103 under Project PID2020-113832RB-C21, in part by the Government of Catalonia, and in part by the European Social Fund under Grant 2021-FI-B-137., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Digital linearization of wideband envelope tracking power amplifiers for mobile terminals

  • Li, Wantao
  • Montoro López, Gabriel
  • Gilabert Pinal, Pere Lluís
This article presents a low-complexity linearization method to compensate for multisource nonlinear distortion in wideband envelope tracking (ET) power amplifiers (PAs) for 5G new radio (NR) mobile terminals. The proposed linearization approach consists in an envelope leakage cancellation (ELC) system operating in the dynamic supply path and a 2-D digital predistortion (2-D-DPD) linearizer acting on the baseband complex modulated signal. In a first step, an envelope generalized memory polynomial (EGMP) behavioral model is proposed to compensate for the unwanted radio frequency (RF) leakage that appears at the output of ET modulator (ETM). Then, a baseband 2-D-DPD linearizer based on a slow envelope-dependent generalized memory polynomial (SED-GMP) behavioral model is used to further enhance the linearization performance. The proposed method is validated on a system-on-chip (SoC) ET PA board for mobile applications. The reported experimental results show how the proposed digital linearization approach can mitigate the linearity and efficiency trade-off in ET PAs. Consequently, the out-of-band linearity requirement of - 36 dBc of adjacent channel power ratio (ACPR) is met for 5G-NR test signals with bandwidths ranging from 60 to 200 MHz at 2.55 GHz (band B41), with an overall ET PA power efficiency ranging from 10.1 % and up to 16.5 % , depending on the signal bandwidth., The work in this paper was funded by Huawei Technologies from July 2020 to August 2021; and supported in part by the project PID2020-113832RB-C21 funded by MCIN/AEI/10.13039/50110001103 and in part by the Government of Catalonia and the European Social Fund under Grant 2021-FI-B-137. This paper is an expanded version from the IEEE Topical Conference on RF/Microwave Power Amplifiers for Radio and Wireless Applications (PAWR), Las Vegas, NV, USA, January 2022., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fast analysis and optimization of sparsely distributed partial modification problems

  • Fang, Xiaoxing
  • Heldring, Alexander
  • Rius Casals, Juan Manuel
  • Cao, Qunsheng
This article addresses the efficient numerical analysis of sparsely distributed small modifications in a large structure, that is, the sparsely distributed partial modification problem (SDPMP). A hierarchical matrix (H-matrix)-based fast direct solver is adopted to solve the SDPMP in a very short time for each new set of modifications. The main idea of this method is to reuse the parts of the compressed inverse matrix operator that do not change and only recompute the modified parts. In contrast with already existing algorithms designed to tackle a single localized modification, this new approach is still very fast for sparsely distributed small modifications, so it becomes a very attractive option to solve optimization problems efficiently, due to the very cheap analysis of the modified structure at each iteration of the optimization procedure. The efficiency of the solution of SDPMP is demonstrated for several cases involving passive and active metasurfaces and a reconfigurable antenna. As a practical example, a programmable metasurface reflector is optimized with particle swarm optimization to obtain a prescribed reflection pattern., This work was supported in part by the National Nature Science Foundation of China under Grant 61871219; in part by the China Scholarship Council under Grant 201906830042; in part by the Startup Foundation for Introducing Talent of the Nanjing University of Information Science and Technology (NUIST) under Grant 2022r079; in part by the Ministerio de Ciencia e Innovacion (MICINN) under Project PID2019- 107885GB-C31/AEI/10.13039/501100011033, Project PID2020-113832RBC21/AEI/10.13039/501100011033, and Project TEC2017-84817-C2-2-R/AEI/ 10.13039/501100011033; and in part by the Unidad de Excelencia Maria de Maeztu, which is financed by the Agencia Estatal de Investigación, Spain, under Grant MDM-2016-0600/AEI/10.13039/501100011033; and in part by the Catalan Agency for Management of University and Research Grants (AGAUR) under Research Group under Grant 2017 SGR 219., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Agnostic envelope linearization of dynamically supplied power amplifiers for mobile terminals

  • Li, Wantao
  • Montoro López, Gabriel
  • Gilabert Pinal, Pere Lluís
This paper presents an envelope linearization technique to compensate for the nonlinear distortion of envelope tracking (ET) power amplifiers (PAs) for 5G new radio (NR) mobile terminals. The proposed envelope optimization (EOPT) method is agnostic of the nonlinear distortion generated in the envelope supply path and can compensate for the nonlinear distortion at the ET PA output without the need to monitor the output at the envelope tracking modulator (ETM). The linearization system in the envelope path is based on the envelope generalized memory polynomial (EGMP) behavioral model. Since the ETM output is not available, an iterative nonlinear least squares solution inspired in the deep deterministic policy gradient (DDPG) algorithm is proposed to extract the coefficients of the EGMP model. The EOPT method is validated on a system-on-chip (SoC) ET PA board designed for mobile terminal applications. Experimental results show the suitability of the proposed method to guarantee the linearity requirements (i.e., adjacent channel power ratio below -36 dBc) with 16.8% of power efficiency when operating the ET PA with 5G new radio test signals of 60 MHz bandwidth operating at 2.55 GHz (band 7). The linearization performance of the proposed EOPT method is comparable to the envelope leakage cancellation (ELC) approach (but saving the need for an analog to digital converter to monitor the ETM output), and can outperform a conventional I-Q digital predistorter based on the generalized memory polynomial (GMP) behavioral model., This research was funded by Huawei Technologies from July 2020 to August 2021; and supported in part by the project PID2020-113832RB-C21 funded by MCIN/AEI/10.13039/50110001103 and in part by the Government of Catalonia and the European Social Fund under Grant 2021-FI-B-137., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quasi-3D model for lateral resonances on homogeneous BAW resonators

  • Udaondo Guerrero, Carlos
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
Lateral modes are responsible for the in-band spurious resonances that appear on BAW resonators, degrading the in-band filter response. In this work, a fast computational method based on the transmission line matrix (TLM) method is employed to model the lateral resonances of BAW resonators. Using the precomputed dispersion curves of Lamb waves and an equivalent characteristic impedance for the TE1 mode, a network of transmission lines is used to calculate the magnitude of field distributions on the electrodes. These characteristics are specific to the stack layer configuration. The model’s implementation is based on nodal Y matrices, from which particle displacement profiles are coupled to the electric domain via piezoelectric constitutive relations. Consequently, the input impedance of the resonator is obtained. The model exhibits strong agreement with FEM simulations of FBARs and SMRs, and with measurements of several SMRs. The proposed model can provide accurate predictions of resonator input impedance, which is around 200 times faster than conventional FEM., This research was funded by the Catalan Government under Grant 2017 SGR 813, by Spanish Government under Grant PID2020-118410RB-C21 and Grant PID2020-113832RB-C21, and by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through Grant 2020 FI_B-00967., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A scalable bandwidth and frequency-dependent DPD linearizer for user equipment power amplifiers with nonflat frequency response

  • Li, Wantao
  • Guo, Yan
  • Montoro López, Gabriel
  • Gilabert Pinal, Pere Lluís
This article presents a scalable digital predistortion (DPD) linearizer for handset power amplifiers (PAs) with nonflat frequency response and assuming a 5G scenario with dynamic resource blocks (RBs) reallocation. The scalable DPD model is designed to be both bandwidth and frequency-dependent, including some design constraints targeting a resource-efficient hardware implementation. In order to extract the most relevant basis functions that better trade-off the linearization performance and the required resources of a hardware implementation of the DPD, a feature selection technique based on a constrained version of the doubly orthogonal matching pursuit (DOMP) is proposed. The linearization performance of the proposed DPD method is evaluated on a PA system-on-chip (SoC), considering 5G new radio (NR) signals at different frequency locations and with different bandwidths within a 100 MHz channel., This work was supported in part by Huawei Technologies from July 2022 to August 2023, in part by the Ministerio de Ciencia e Innovación (MCIN)/Agencia Estatal de Investigación (AEI)/10.13039/50110001103 under Project PID2020-113832RB-C21, in part by the Government of Catalonia, and in part by the European Social Fund under Grant 2021-FI-B-137., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Digital predistortion linearization of a GaN HEMT push-pull power amplifier for cable applications with high fractional bandwidth

  • Gilabert Pinal, Pere Lluís
  • Pérez-Cisneros, José Ramón
  • Ren, Zhixiong
  • Montoro López, Gabriel
  • Ruiz Lavin, Maria de las Nieves
  • García García, José Ángel
This paper presents two linearization strategies for a custom-designed wideband push-pull (PP) power amplifier (PA) for wired communication applications such as, for example, cable TV. Two digital predistortion (DPD) behavioral models are proposed to meet the in-band and out-of-band linearity requirements when efficiently amplifying wideband DOCSIS signals with high fractional bandwidth (FBW). A radiofrequency (RF) DPD linearizer based on a band-pass generalized memory polynomial (BP-GMP) behavioral model and a baseband (BB) I-Q DPD linearizer based on a harmonic distortion GMP (HD-GMP) behavioral model are proposed. Both DPD models take into account the harmonic distortion typical of high FBW amplification. Experimental results will show high efficient and linear amplification of a 4 × 192 MHz composite DOCSIS signal by properly combining a crest factor reduction (CFR) technique and the proposed DPD strategies., The work in this paper was funded by Huawei Technologies from March 2017 to April 2019; and supported in part by the project PID2020-113832RB- C21 funded by MCIN/AEI/10.13039/50110001103., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Distributed nonlinear model and fast analysis for in-band IMD3 prediction of surface acoustic wave resonators

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • González Arbesú, José María
  • Huebner, Sebatian
The motivation of this work is to analyze the in-band intermodulation distortion (IMD) occurring in surface acoustic wave (SAW) devices, using a recently developed fast method based on the input–output equivalent sources (IOES). The method calculates the equivalent current sources of a given harmonic (H) or IMD, which when applied at the boundaries of any uniform nonlinear region produce the same nonlinearities as the full distributed circuit. The accuracy of the method is validated with a very simplified SAW resonator with ten digits, which is modeled by a discretized Mason-based circuit. The IOES method provides equal results to the ones obtained through harmonic balance (HB) simulations, performed by means of commercial software, being the first 1000 times faster. Once the accuracy of the method is guaranteed, it is used to analyze the measured in-band IMD3 of several lithium tantalite 42° cut leaky SAW (LSAW) resonators with different pitches and duty factors at the B66 long term evolution (LTE) frequency band. Those resonators are comprised of 100 and 20 electrode pairs for the active region and each of the reflectors, respectively, which implies the analysis of a very large distributed nonlinear problem with thousands of nonlinear local sources. The IOES method takes 35.4 s in simulating 51 frequency points, whereas this simulation is not possible using a commercial HB simulator on a general-purpose computer., This work was supported in part by the Spanish Gov. through grants PID2020-118410RB-C21 and PID2020-113832RB-C21 funded by MCIN/AEI/10.13039/50110001103 and by the Catalan Gov. under grant 2017 SGR-813., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Training data selection and dimensionality reduction for polynomial and artificial neural network MIMO adaptive digital predistortion

  • López Bueno, David
  • Montoro López, Gabriel
  • Gilabert Pinal, Pere Lluís
© 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In 5G and beyond radios, the increased bandwidth, the fast-changing waveform scenarios, and the operation of large array multiple-input multiple-output (MIMO) transmitter architectures have challenged both the polynomial and the artificial neural network (ANN) MIMO adaptive digital predistortion (DPD) schemes. This article proposes training data selection methods and dimensionality reduction techniques that can be combined to enable relevant reductions of the DPD training time and the implementation complexity for MIMO transmitter architectures. In this work, the combination of an efficient uncorrelated equation selection (UES) mechanism together with orthogonal least squares (OLS) is proposed to reduce the training data length and the number of basis functions at every behavioral modeling matrix in the polynomial MIMO DPD scheme. For ANN MIMO DPD architectures, applying UES and principal component analysis (PCA) is proposed to reduce the input dataset length and features, respectively. The UES-OLS and the UES-PCA techniques are experimentally validated for a 2×2 MIMO test setup with strong power amplifier (PA) input and output crosstalk., This work was supported in part by the MCIN/AEI/10.13039/501100011033 under Project PID2020-113832RB-C22 and Project PID2020-113832RB-C21; and in part by the European Union-NextGenerationEU through the Spanish Recovery, Transformation and Resilience Plan, under Project TSI-063000-2021-121 (MINECO UNICO Programme)., Peer Reviewed, Postprint (author's final draft)