Pasar al contenido principal

RESONADORES Y FILTROS ELECTRO-ACUSTICOS PARA APLICACIONES 5G SUB-6 GHZ

PID2020-118410RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 26
Encontrada(s) 1 página(s)

UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Optimal modes for spatially multiplexed free-space communication in atmospheric turbulence

  • Belmonte Molina, Aniceto|||0000-0002-9546-5999
  • Kahn, Joseph M.
In near-field free-space optical (FSO) communication, spatial-mode multiplexing (SMM) increases transmission capacity by transmitting independent information streams in orthogonal modes. Propagation through atmospheric turbulence causes phase and amplitude distortions that can degrade SMM performance. In this paper, we show there exist optimal modes for transmission through turbulence with minimum degradation, under a realistic assumption that a transmitter knows the turbulence statistics but not the instantaneous state of the atmosphere. These modes are determined by performing a Karhunen-Loève expansion of the optical electric field in the receiver aperture. We show that these modes are Laguerre-Gauss (LG) modes whose beam waist is chosen depending on the field coherence length in the receiver plane. These adaptive-waist LG modes, when ordered by decreasing eigenvalue, can approximate a received signal field by a finite number of modes with lowest mean-square error among all orthonormal mode sets. Hence, they represent optimal transmit and receive bases for SMM FSO. Using numerical simulation, we study SMM FSO transmission at various turbulence strengths and signal-to-noise ratios. We compare the performance using the adaptive-waist LG modes to that using fixed-waist LG modes (which assume no knowledge of turbulence statistics) and instantaneous eigenmodes (which assume knowledge of the instantaneous state of the turbulence). We also study the performance using the orbital angular momentum subsets of the adaptive-waist LG mode and fixed-waist LG mode sets., FUNDING: Funding. Agencia Estatal de Investigación (PID2020-118410RB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Accurate and time-efficient electromagnetic scattering analysis of thick impenetrable planar structures

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Heldring, Alexander|||0000-0003-2011-2096
  • Tapia Folch, Núria
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The scattering analysis of perfectly conducting plates, with very small electrical thickness, in the free space is normally carried out through the zero-thickness approximation, which arises from modelling the whole closed surface enclosing the plate as an open surface. The resulting accuracy, though acceptable in many practical applications, deteriorates drastically for growing plate thicknesses or under grazing-angle incidence. In this paper, we provide a thorough description of the recently proposed thick-plate approach, which, while maintaining the agile single-mesh management of the zero-thickness scheme, offers improved accuracy with restricted computational overhead for a wider range of plate thicknesses or plane wave incidences. The computed thick-plate RCS solution deviation as compared with the zero-thickness and full method-of-moment solutions is quantified for an illustrative variety of flat perfectly conducting structures with different electrical dimensions, shapes (rectangular or circular), rim contour (straight or rounded) and plane wave incidence (perpendicular or grazing)., This work is part of the R&D projects PID2020-118410RB-C21, PID2023- 146245OB-C21, PID2022-136869NB-C31, PDC2022-133091-I00 funded by MICIU/AEI/10.13039/501100011033/FEDER/UE (Agencia Estatal de Investigación, Spain and the UE), and the Research Group 2021 SGR 01415 funded by the Catalan Agency for Management of University and Research Grants (AGAUR)., Peer Reviewed, 8 - Treball Decent i Creixement Econòmic, 8.2 - Aconseguir nivells més elevats de productivitat econòmica mitjançant la diversificació, la modernització tecnològica i la innovació, entre d’altres maneres centrant l’atenció en sectors de més valor afegit i ús intensiu de mà d’obra, 8.4 - Millorar progressivament, per a 2030, la producció i el consum eficients dels recursos mundials i procurar desvincular el creixement econòmic de la degradació del medi ambient, de conformitat amb el Marc decennal de programes sobre modalitats sostenibles de consum i producció, començant pels països desenvolupats, 9 - Indústria, Innovació i Infraestructura, 9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambientalment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectives, 9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupament per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat, 12.6 - Encoratjar les empreses, en especial les grans empreses i les empreses transnacionals, a adoptar pràctiques sostenibles i a incorporar informació sobre la sostenibilitat en el seu cicle de presentació d’informes, 12 - Producció i Consum Responsables
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adaptive-waist modes for free-space optical communications

  • Belmonte Molina, Aniceto|||0000-0002-9546-5999
Free-space optical communication systems are vulnerable to phase distortions and amplitude fluctuations caused by atmospheric turbulence, which degrade signal coherence and impair overall performance. Instead of correcting these distortions in real time, we propose an approach based on adaptive-waist modes statistically matched to the turbulence, assuming the transmitter has access to turbulence statistics but not to instantaneous atmospheric conditions. A fundamental Gaussian adaptive-waist mode maximizes power efficiency, while distributing power across multiple adaptive modes enhances link reliability by mitigating turbulence-induced fading. This tradeoff is quantitatively evaluated under varying turbulence conditions, demonstrating significant performance gains over standard Gaussian beams without requiring wavefront correction., Funding. National Research Agency AEI (PID2020-118410RB-C21)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical discretization of the electric field integral equation for the scattering analysis of nonconformal meshes

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
The scattering analysis with the Electric-Field Integral Equation of perfectly conducting objects by the Method of Moments has been traditionally carried out with Galerkin divergence-conforming schemes. These implementations are numerically convenient since the dominant Kernel contributions in near-field impedance computation become weakly singular. On the other hand, the divergence-conforming sets of basis functions enforce the continuity of the normal component of the expanded current or tested electric field through the edges arising from the discretization, which restricts the analysis to conformal meshes, where adjacent facets must have a single edge in common. In practice, this hampers the agile and versatile design of complex structures, which very often need to be modelled through the interconnection of independent meshes. In this paper, we introduce a new discretization of the Electric-Field Integral Equation that relies on the expansion of the current through a hierarchical rearrangement of the monopolar-RWG expansion of the current (discontinuous at edges) and the volumetric/surface testing of the tangential/normal electric-field components. We show with RCS-results the accuracy of the proposed scheme in the analysis of several perfectly conducting objects, either conformally or nonconformally meshed., This work was supported in part by MICIU/AEI/ 10.13039/501100011033/FEDER, UE, under Projects PID2020-118410RB-C21, PID2022-136869NB-C31 and PID2023-146245OB-C21., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Improvements in randomized matrix compression methods for numerical analysis of antennas and scatterers

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Heldring, Alexander|||0000-0003-2011-2096
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
We propose a randomized Pseudo Skeleton (or CUR) Approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Approximation Method (ACA), the method is purely algebraic. The method is tested with standard cases to assess its quality and efficiency, This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Simple randomized strategies for low-rank matrix compression

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Molina Burgués, Robert|||0009-0005-1314-3742
  • Heldring, Alexander|||0000-0003-2011-2096
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
We propose a randomized Pseudo Skeleton (or CUR) approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is essentially the Matrix Decomposition Algorithm (MDA) of Michielssen and Boag (1994) with equivalent basis and testing functions equal to a random subset of the original ones. It is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Cross Approximation (ACA), CUR is purely algebraic. The method is tested with standard cases to assess its quality and efficiency., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2022-136869NBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Quasi-3D model for lateral resonances on homogeneous BAW resonators

  • Udaondo Guerrero, Carlos|||0000-0002-4251-0530
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
Lateral modes are responsible for the in-band spurious resonances that appear on BAW resonators, degrading the in-band filter response. In this work, a fast computational method based on the transmission line matrix (TLM) method is employed to model the lateral resonances of BAW resonators. Using the precomputed dispersion curves of Lamb waves and an equivalent characteristic impedance for the TE1 mode, a network of transmission lines is used to calculate the magnitude of field distributions on the electrodes. These characteristics are specific to the stack layer configuration. The model’s implementation is based on nodal Y matrices, from which particle displacement profiles are coupled to the electric domain via piezoelectric constitutive relations. Consequently, the input impedance of the resonator is obtained. The model exhibits strong agreement with FEM simulations of FBARs and SMRs, and with measurements of several SMRs. The proposed model can provide accurate predictions of resonator input impedance, which is around 200 times faster than conventional FEM., This research was funded by the Catalan Government under Grant 2017 SGR 813, by Spanish Government under Grant PID2020-118410RB-C21 and Grant PID2020-113832RB-C21, and by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through Grant 2020 FI_B-00967., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A GPU parallel randomized CUR compression method for the Method of Moments

  • López Menchón, Héctor|||0000-0001-5776-1423
  • Heldring, Alexander|||0000-0003-2011-2096
  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
In this work, we propose a GPU parallel implementation of the randomized CUR (or Pseudo Skeleton) Approximation to compress the -matrices of linear systems that arise in the discretization of integral equations modeling electromagnetic scattering problems. This compression method is highly parallelizable, in contrast with other similar methods such as the Adaptive Cross Approximation. It involves dense linear algebra computations that can be efficiently implemented on a GPU device. Besides, a stochastic convergence criterion is introduced to minimize the communication between the host and the device. Testing the code with standard cases shows the efficiency and accuracy of the method., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019- 107885GB-C31 / AEI / 10.13039/501100011033, PID2020-113832RB-C21 / AEI / 10.13039/501100011033 and PID-2020-118410RB- C21 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Fast modeling of lateral modes in BAW resonators with arbitrary in-plane geometry

  • Udaondo Guerrero, Carlos|||0000-0002-4251-0530
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Llevadot, Jordi|||0000-0003-1735-9434
The Transmission Line Matrix (TLM) method is used to model and predict lateral spurious resonances in a BAW resonator. The dispersive characteristics of the main propagating mode, which are defined by the stack of materials, are considered with dispersive transmission lines along the in-plane lateral directions of the resonator. The particle displacement profiles obtained with the TLM method are coupled to the electric domain. From these, the input impedance of the resonator is obtained. This allows for fast simulations of the lateral resonances using nodal admittance matrices. © 2022 IEEE., This work was supported in part by the Catalan Government under Grant 2017 SGR 813, in part by the Spanish Government under Grant PID2020- 118410RB-C21 and Grant PID2020-113832RB-C21, and was also supported by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through grant 2020 FI_B-00967, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Distributed nonlinear model and fast analysis for in-band IMD3 prediction of surface acoustic wave resonators

  • González Rodríguez, Marta|||0000-0001-7922-2674
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • González Arbesú, José María|||0000-0002-9601-0988
  • Huebner, Sebatian
The motivation of this work is to analyze the in-band intermodulation distortion (IMD) occurring in surface acoustic wave (SAW) devices, using a recently developed fast method based on the input–output equivalent sources (IOES). The method calculates the equivalent current sources of a given harmonic (H) or IMD, which when applied at the boundaries of any uniform nonlinear region produce the same nonlinearities as the full distributed circuit. The accuracy of the method is validated with a very simplified SAW resonator with ten digits, which is modeled by a discretized Mason-based circuit. The IOES method provides equal results to the ones obtained through harmonic balance (HB) simulations, performed by means of commercial software, being the first 1000 times faster. Once the accuracy of the method is guaranteed, it is used to analyze the measured in-band IMD3 of several lithium tantalite 42° cut leaky SAW (LSAW) resonators with different pitches and duty factors at the B66 long term evolution (LTE) frequency band. Those resonators are comprised of 100 and 20 electrode pairs for the active region and each of the reflectors, respectively, which implies the analysis of a very large distributed nonlinear problem with thousands of nonlinear local sources. The IOES method takes 35.4 s in simulating 51 frequency points, whereas this simulation is not possible using a commercial HB simulator on a general-purpose computer., This work was supported in part by the Spanish Gov. through grants PID2020-118410RB-C21 and PID2020-113832RB-C21 funded by MCIN/AEI/10.13039/50110001103 and by the Catalan Gov. under grant 2017 SGR-813., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Application of the input-output equivalent sources method for the simulation of nonlinearities in TC-SAW resonators and filters

  • González Rodríguez, Marta|||0000-0001-7922-2674
  • Collado Gómez, Juan Carlos|||0000-0002-8869-2739
  • Mateu Mateu, Jordi|||0000-0001-9833-9966
  • González Arbesú, José María|||0000-0002-9601-0988
  • Huebner, Sebatian
  • Aigner, Robert
A good understanding of the nonlinearity mechanism in SAW devices is a crucial aspect in the filter stage. Nonlinear intermodulation distortion (IMD) may lead to spurious signals falling into the receiver band and limiting its sensitivity. Identify the dominant source of nonlinearity specially at high-power is important for a good prediction of the filter nonlinear response. In this work, third-order intermodulation (IMD3) products in TC-SAW (Temperature Compensated-SAW) devices are presented. Within this work we apply the previously developed Input-Output Equivalent Sources (IOES) method to compute nonlinearities of more complex structures such as ladder-type and CRF (Coupled Resonator Filter) filter structures., This work was supported in part by the Spanish Government through grant PID2020-118410RB-C21. Research was also supported by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through grant FI_B-00136., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical grid-robust discretization of the electric-field integral equation by the method of moments

  • Úbeda Farré, Eduard|||0000-0001-6759-0445
  • Rius Casals, Juan Manuel|||0000-0003-0606-5422
Traditionally, the scattering analysis with the Electric-Field Integral Equation of perfectly conducting objects has been carried out through divergence-conforming schemes of discretization, which are numerically convenient because the dominant Kernel contributions are weakly singular. Since the divergence-conforming sets enforce by definition the continuity of the normal component of the expanded magnitudes through the edges arising from the discretization, the analysis can only be applied to objects conformally meshed, with adjacent facets sharing a single edge. In practice, this hampers the flexible analysis of complex structures, which very often need to be modelled through the interconnection of independent meshes. In this paper, we introduce two novel schemes of discretization of the Electric-Field Integral Equation that are based on the expansion of the current through a hierarchical rearrangement of the monopolar-RWG expansion of the current (fully discontinuous at edges). Both schemes manage the zeroth-order scheme of testing in the same manner. The first-order testing scheme, though, is implemented differently in both cases, either through volumetric or through surface testing integrals. We show with RCS-results the accuracy of the proposed schemes in the analysis of a sharp-edged perfectly conducting object., This work was supported in part by MICIU/AEI/10.13039/501100011033/FEDER, UE, under Projects PID2020-118410RB-C21, PID2022-136869NB-C31 and PID2023-146245OB-C21., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Graph-based model for adaptive simulation of beam propagation in turbulent media

  • Belmonte Molina, Aniceto|||0000-0002-9546-5999
A graph-based approach uses a triangular adaptive mesh for simulating the propagation of light beams through the atmosphere. In this approach, the atmospheric turbulence and the beam wavefront are signals in a graph, with vertices representing an irregular distribution of signal points and edges between vertices showing their relationships. The adaptive mesh provides a better representation of the spatial variations in the beam wavefront, resulting in increased accuracy and resolution compared to regular meshing schemes. The adaptability of this approach to the propagated beam characteristics makes it a versatile tool for simulating beam propagation in various turbulence conditions., FUNDING: Funding. Agencia Estatal de Investigación (PID2020-118410RB-C21)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Improvements in randomized matrix compression methods for numerical analysis of antennas and scatterers

  • López Menchón, Héctor
  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
We propose a randomized Pseudo Skeleton (or CUR) Approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Approximation Method (ACA), the method is purely algebraic. The method is tested with standard cases to assess its quality and efficiency, This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A GPU parallel randomized CUR compression method for the Method of Moments

  • López Menchón, Héctor
  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
In this work, we propose a GPU parallel implementation of the randomized CUR (or Pseudo Skeleton) Approximation to compress the -matrices of linear systems that arise in the discretization of integral equations modeling electromagnetic scattering problems. This compression method is highly parallelizable, in contrast with other similar methods such as the Adaptive Cross Approximation. It involves dense linear algebra computations that can be efficiently implemented on a GPU device. Besides, a stochastic convergence criterion is introduced to minimize the communication between the host and the device. Testing the code with standard cases shows the efficiency and accuracy of the method., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019- 107885GB-C31 / AEI / 10.13039/501100011033, PID2020-113832RB-C21 / AEI / 10.13039/501100011033 and PID-2020-118410RB- C21 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical discretization of the electric field integral equation for the scattering analysis of nonconformal meshes

  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
The scattering analysis with the Electric-Field Integral Equation of perfectly conducting objects by the Method of Moments has been traditionally carried out with Galerkin divergence-conforming schemes. These implementations are numerically convenient since the dominant Kernel contributions in near-field impedance computation become weakly singular. On the other hand, the divergence-conforming sets of basis functions enforce the continuity of the normal component of the expanded current or tested electric field through the edges arising from the discretization, which restricts the analysis to conformal meshes, where adjacent facets must have a single edge in common. In practice, this hampers the agile and versatile design of complex structures, which very often need to be modelled through the interconnection of independent meshes. In this paper, we introduce a new discretization of the Electric-Field Integral Equation that relies on the expansion of the current through a hierarchical rearrangement of the monopolar-RWG expansion of the current (discontinuous at edges) and the volumetric/surface testing of the tangential/normal electric-field components. We show with RCS-results the accuracy of the proposed scheme in the analysis of several perfectly conducting objects, either conformally or nonconformally meshed., This work was supported in part by MICIU/AEI/ 10.13039/501100011033/FEDER, UE, under Projects PID2020-118410RB-C21, PID2022-136869NB-C31 and PID2023-146245OB-C21., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adaptive-waist modes for free-space optical communications

  • Belmonte Molina, Aniceto
Free-space optical communication systems are vulnerable to phase distortions and amplitude fluctuations caused by atmospheric turbulence, which degrade signal coherence and impair overall performance. Instead of correcting these distortions in real time, we propose an approach based on adaptive-waist modes statistically matched to the turbulence, assuming the transmitter has access to turbulence statistics but not to instantaneous atmospheric conditions. A fundamental Gaussian adaptive-waist mode maximizes power efficiency, while distributing power across multiple adaptive modes enhances link reliability by mitigating turbulence-induced fading. This tradeoff is quantitatively evaluated under varying turbulence conditions, demonstrating significant performance gains over standard Gaussian beams without requiring wavefront correction., Funding. National Research Agency AEI (PID2020-118410RB-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Simple randomized strategies for low-rank matrix compression

  • López Menchón, Héctor
  • Molina Burgués, Robert
  • Heldring, Alexander
  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
We propose a randomized Pseudo Skeleton (or CUR) approximation method to compress the H-matrices of linear systems that arise in the discretization of integral equations in electromagnetic scattering. This method is essentially the Matrix Decomposition Algorithm (MDA) of Michielssen and Boag (1994) with equivalent basis and testing functions equal to a random subset of the original ones. It is highly parellelizable and well suited for fine-granularity architectures as GPUs. As the Adaptive Cross Approximation (ACA), CUR is purely algebraic. The method is tested with standard cases to assess its quality and efficiency., This work was partly funded by the Ministerio de Ciencia e Innovacion (MICINN) under projects PID2019-107885GBC31 / AEI / 10.13039/501100011033, PID2022-136869NBC31 / AEI / 10.13039/501100011033, PID2020-113832RBC21 / AEI / 10.13039/501100011033 and PID-2020-118410RB-C21 / AEI / 10.13039/501100011033, PDC2022-133091-I00 / AEI / 10.13039/501100011033, and Catalan Research Group 2017 SGR 219 and grant 2021 FI B2 00096., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Fast modeling of lateral modes in BAW resonators with arbitrary in-plane geometry

  • Udaondo Guerrero, Carlos
  • Collado Gómez, Juan Carlos
  • Mateu Llevadot, Jordi
The Transmission Line Matrix (TLM) method is used to model and predict lateral spurious resonances in a BAW resonator. The dispersive characteristics of the main propagating mode, which are defined by the stack of materials, are considered with dispersive transmission lines along the in-plane lateral directions of the resonator. The particle displacement profiles obtained with the TLM method are coupled to the electric domain. From these, the input impedance of the resonator is obtained. This allows for fast simulations of the lateral resonances using nodal admittance matrices. © 2022 IEEE., This work was supported in part by the Catalan Government under Grant 2017 SGR 813, in part by the Spanish Government under Grant PID2020- 118410RB-C21 and Grant PID2020-113832RB-C21, and was also supported by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through grant 2020 FI_B-00967, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quasi-3D model for lateral resonances on homogeneous BAW resonators

  • Udaondo Guerrero, Carlos
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
Lateral modes are responsible for the in-band spurious resonances that appear on BAW resonators, degrading the in-band filter response. In this work, a fast computational method based on the transmission line matrix (TLM) method is employed to model the lateral resonances of BAW resonators. Using the precomputed dispersion curves of Lamb waves and an equivalent characteristic impedance for the TE1 mode, a network of transmission lines is used to calculate the magnitude of field distributions on the electrodes. These characteristics are specific to the stack layer configuration. The model’s implementation is based on nodal Y matrices, from which particle displacement profiles are coupled to the electric domain via piezoelectric constitutive relations. Consequently, the input impedance of the resonator is obtained. The model exhibits strong agreement with FEM simulations of FBARs and SMRs, and with measurements of several SMRs. The proposed model can provide accurate predictions of resonator input impedance, which is around 200 times faster than conventional FEM., This research was funded by the Catalan Government under Grant 2017 SGR 813, by Spanish Government under Grant PID2020-118410RB-C21 and Grant PID2020-113832RB-C21, and by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through Grant 2020 FI_B-00967., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Graph-based model for adaptive simulation of beam propagation in turbulent media

  • Belmonte Molina, Aniceto
A graph-based approach uses a triangular adaptive mesh for simulating the propagation of light beams through the atmosphere. In this approach, the atmospheric turbulence and the beam wavefront are signals in a graph, with vertices representing an irregular distribution of signal points and edges between vertices showing their relationships. The adaptive mesh provides a better representation of the spatial variations in the beam wavefront, resulting in increased accuracy and resolution compared to regular meshing schemes. The adaptability of this approach to the propagated beam characteristics makes it a versatile tool for simulating beam propagation in various turbulence conditions., FUNDING: Funding. Agencia Estatal de Investigación (PID2020-118410RB-C21)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical grid-robust discretization of the electric-field integral equation by the method of moments

  • Úbeda Farré, Eduard
  • Rius Casals, Juan Manuel
Traditionally, the scattering analysis with the Electric-Field Integral Equation of perfectly conducting objects has been carried out through divergence-conforming schemes of discretization, which are numerically convenient because the dominant Kernel contributions are weakly singular. Since the divergence-conforming sets enforce by definition the continuity of the normal component of the expanded magnitudes through the edges arising from the discretization, the analysis can only be applied to objects conformally meshed, with adjacent facets sharing a single edge. In practice, this hampers the flexible analysis of complex structures, which very often need to be modelled through the interconnection of independent meshes. In this paper, we introduce two novel schemes of discretization of the Electric-Field Integral Equation that are based on the expansion of the current through a hierarchical rearrangement of the monopolar-RWG expansion of the current (fully discontinuous at edges). Both schemes manage the zeroth-order scheme of testing in the same manner. The first-order testing scheme, though, is implemented differently in both cases, either through volumetric or through surface testing integrals. We show with RCS-results the accuracy of the proposed schemes in the analysis of a sharp-edged perfectly conducting object., This work was supported in part by MICIU/AEI/10.13039/501100011033/FEDER, UE, under Projects PID2020-118410RB-C21, PID2022-136869NB-C31 and PID2023-146245OB-C21., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Accurate and time-efficient electromagnetic scattering analysis of thick impenetrable planar structures

  • Úbeda Farré, Eduard
  • Heldring, Alexander
  • Tapia Folch, Núria
  • Rius Casals, Juan Manuel
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., The scattering analysis of perfectly conducting plates, with very small electrical thickness, in the free space is normally carried out through the zero-thickness approximation, which arises from modelling the whole closed surface enclosing the plate as an open surface. The resulting accuracy, though acceptable in many practical applications, deteriorates drastically for growing plate thicknesses or under grazing-angle incidence. In this paper, we provide a thorough description of the recently proposed thick-plate approach, which, while maintaining the agile single-mesh management of the zero-thickness scheme, offers improved accuracy with restricted computational overhead for a wider range of plate thicknesses or plane wave incidences. The computed thick-plate RCS solution deviation as compared with the zero-thickness and full method-of-moment solutions is quantified for an illustrative variety of flat perfectly conducting structures with different electrical dimensions, shapes (rectangular or circular), rim contour (straight or rounded) and plane wave incidence (perpendicular or grazing)., This work is part of the R&D projects PID2020-118410RB-C21, PID2023- 146245OB-C21, PID2022-136869NB-C31, PDC2022-133091-I00 funded by MICIU/AEI/10.13039/501100011033/FEDER/UE (Agencia Estatal de Investigación, Spain and the UE), and the Research Group 2021 SGR 01415 funded by the Catalan Agency for Management of University and Research Grants (AGAUR)., Peer Reviewed, 8 - Treball Decent i Creixement Econòmic, 8.2 - Aconseguir nivells més elevats de productivitat econòmica mitjançant la diversificació, la modernització tecnològica i la innovació, entre d’altres maneres centrant l’atenció en sectors de més valor afegit i ús intensiu de mà d’obra, 8.4 - Millorar progressivament, per a 2030, la producció i el consum eficients dels recursos mundials i procurar desvincular el creixement econòmic de la degradació del medi ambient, de conformitat amb el Marc decennal de programes sobre modalitats sostenibles de consum i producció, començant pels països desenvolupats, 9 - Indústria, Innovació i Infraestructura, 9.4 - Per a 2030, modernitzar les infraestructures i reconvertir les indústries perquè siguin sostenibles, usant els recursos amb més eficàcia i promovent l’adopció de tecnologies i processos industrials nets i racionals ambientalment, i aconseguint que tots els països adoptin mesures d’acord amb les capacitats respectives, 9.5 - Augmentar la investigació científica i millorar la capacitat tecnològica dels sectors industrials de tots els països, en particular els països en desenvolupament, entre d’altres maneres fomentant la innovació i augmentant substancialment, d’aquí al 2030, el nombre de persones que treballen en el camp de la investigació i el desenvolupament per cada milió d’habitants, així com la despesa en investigació i desenvolupament dels sectors públic i privat, 12.6 - Encoratjar les empreses, en especial les grans empreses i les empreses transnacionals, a adoptar pràctiques sostenibles i a incorporar informació sobre la sostenibilitat en el seu cicle de presentació d’informes, 12 - Producció i Consum Responsables, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Distributed nonlinear model and fast analysis for in-band IMD3 prediction of surface acoustic wave resonators

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • González Arbesú, José María
  • Huebner, Sebatian
The motivation of this work is to analyze the in-band intermodulation distortion (IMD) occurring in surface acoustic wave (SAW) devices, using a recently developed fast method based on the input–output equivalent sources (IOES). The method calculates the equivalent current sources of a given harmonic (H) or IMD, which when applied at the boundaries of any uniform nonlinear region produce the same nonlinearities as the full distributed circuit. The accuracy of the method is validated with a very simplified SAW resonator with ten digits, which is modeled by a discretized Mason-based circuit. The IOES method provides equal results to the ones obtained through harmonic balance (HB) simulations, performed by means of commercial software, being the first 1000 times faster. Once the accuracy of the method is guaranteed, it is used to analyze the measured in-band IMD3 of several lithium tantalite 42° cut leaky SAW (LSAW) resonators with different pitches and duty factors at the B66 long term evolution (LTE) frequency band. Those resonators are comprised of 100 and 20 electrode pairs for the active region and each of the reflectors, respectively, which implies the analysis of a very large distributed nonlinear problem with thousands of nonlinear local sources. The IOES method takes 35.4 s in simulating 51 frequency points, whereas this simulation is not possible using a commercial HB simulator on a general-purpose computer., This work was supported in part by the Spanish Gov. through grants PID2020-118410RB-C21 and PID2020-113832RB-C21 funded by MCIN/AEI/10.13039/50110001103 and by the Catalan Gov. under grant 2017 SGR-813., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Application of the input-output equivalent sources method for the simulation of nonlinearities in TC-SAW resonators and filters

  • González Rodríguez, Marta
  • Collado Gómez, Juan Carlos
  • Mateu Mateu, Jordi
  • González Arbesú, José María
  • Huebner, Sebatian
  • Aigner, Robert
A good understanding of the nonlinearity mechanism in SAW devices is a crucial aspect in the filter stage. Nonlinear intermodulation distortion (IMD) may lead to spurious signals falling into the receiver band and limiting its sensitivity. Identify the dominant source of nonlinearity specially at high-power is important for a good prediction of the filter nonlinear response. In this work, third-order intermodulation (IMD3) products in TC-SAW (Temperature Compensated-SAW) devices are presented. Within this work we apply the previously developed Input-Output Equivalent Sources (IOES) method to compute nonlinearities of more complex structures such as ladder-type and CRF (Coupled Resonator Filter) filter structures., This work was supported in part by the Spanish Government through grant PID2020-118410RB-C21. Research was also supported by the Secretary of Universities and Research of the Generalitat de Catalunya and the European Social Fund through grant FI_B-00136., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimal modes for spatially multiplexed free-space communication in atmospheric turbulence

  • Belmonte Molina, Aniceto
  • Kahn, Joseph M.
In near-field free-space optical (FSO) communication, spatial-mode multiplexing (SMM) increases transmission capacity by transmitting independent information streams in orthogonal modes. Propagation through atmospheric turbulence causes phase and amplitude distortions that can degrade SMM performance. In this paper, we show there exist optimal modes for transmission through turbulence with minimum degradation, under a realistic assumption that a transmitter knows the turbulence statistics but not the instantaneous state of the atmosphere. These modes are determined by performing a Karhunen-Loève expansion of the optical electric field in the receiver aperture. We show that these modes are Laguerre-Gauss (LG) modes whose beam waist is chosen depending on the field coherence length in the receiver plane. These adaptive-waist LG modes, when ordered by decreasing eigenvalue, can approximate a received signal field by a finite number of modes with lowest mean-square error among all orthonormal mode sets. Hence, they represent optimal transmit and receive bases for SMM FSO. Using numerical simulation, we study SMM FSO transmission at various turbulence strengths and signal-to-noise ratios. We compare the performance using the adaptive-waist LG modes to that using fixed-waist LG modes (which assume no knowledge of turbulence statistics) and instantaneous eigenmodes (which assume knowledge of the instantaneous state of the turbulence). We also study the performance using the orbital angular momentum subsets of the adaptive-waist LG mode and fixed-waist LG mode sets., FUNDING: Funding. Agencia Estatal de Investigación (PID2020-118410RB-C21)., Peer Reviewed, Postprint (published version)