Pasar al contenido principal

GENERACION DE POLIMEROS ANTIMICROBIANOS BIOBASADOS ELECTROACTIVOS PARA APLICACIONES BIOMEDICAS (BE-ACTIVE)

PID2021-123553OA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic Combination of Antimicrobial Peptides and Cationic Polyitaconates in Multifunctional PLA Fibers

  • Chiloeches, Alberto
  • Zágora, J.
  • Plachá, D.
  • Torres, M. D. T.
  • Fuente-Nunez, C. de la
  • López-Fabal, F.
  • Gil-Romero, Y.
  • Fernández-García, R.
  • Fernández-García, Marta
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
Combining different antimicrobial agents has emerged as a promising strategy to enhance efficacy and address resistance evolution. In this study, we investigated the synergistic antimicrobial effect of a cationic biobased polymer and the antimicrobial peptide (AMP) temporin L, with the goal of developing multifunctional electrospun fibers for potential biomedical applications, particularly in wound dressing. A clickable polymer with pendent alkyne groups was synthesized by using a biobased itaconic acid building block. Subsequently, the polymer was functionalized through click chemistry with thiazolium groups derived from vitamin B1 (PTTIQ), as well as a combination of thiazolium and AMP temporin L, resulting in a conjugate polymer-peptide (PTTIQ-AMP). The individual and combined effects of the cationic PTTIQ, Temporin L, and PTTIQ-AMP were evaluated against Gram-positive and Gram-negative bacteria as well as Candida species. The results demonstrated that most combinations exhibited an indifferent effect, whereas the covalently conjugated PTTIQ-AMP displayed an antagonistic effect, potentially attributed to the aggregation process. Both antimicrobial compounds, PTTIQ and temporin L, were incorporated into poly(lactic acid) electrospun fibers using the supercritical solvent impregnation method. This approach yielded fibers with improved antibacterial performance, as a result of the potent activity exerted by the AMP and the nonleaching nature of the cationic polymer, thereby enhancing long-term effectiveness., This work was funded by the MICINN (PID2019-104600RB- I00 and PID2021-123553OA-I00), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (LINKA20364). A. Chiloeches acknowledges MICIU for his FPU fellowship FPU18/01776. Cesar de la Fuente-Nunez holds a Presidential Professorship at the University of Pennsylvania and acknowl- edges funding from the Procter & Gamble Company, United Therapeutics, a BBRF Young Investigator Grant, the Nemirovsky Prize, Penn Health-Tech Accelerator Award, and the Dean’s Innovation Fund from the Perelman School of Medicine at the University of Pennsylvania. Research reported in this publication was supported by the Langer Prize (AIChE Foundation), the National Institute of General Medical Sciences of the National Institutes of Health under award number R35GM138201, and the Defense Threat Reduction Agency (DTRA; HDTRA11810041, HDTRA1-21-1-0014, and HDTRA1-23-1-0001). D. Placha and J. Zagora acknowledge the Doctoral grant competition VSB-Technical University of Ostrava (reg. no. CZ.02.2.69/0.0/0.0/19_073/0016945) with- in the Operational Programme Research, Development and Education, under project DGS/INDIVIDUAL/2020-001 “Development of antimicrobial biobased polymeric material using supercritical fluid technology”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of cellulose derivatives for enhanced antimicrobial activity

  • Echeverría, Coro
  • Arnaldos-Pérez, Irene
  • Barranco, Rosa
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
The need for biodegradable materials has driven the exploration of natural and biobased polymers, with cellulose emerging as a promising option due to its abundance and environmental sustainability. However, cellulose lacks inherent antimicrobial activity, prompting researchers to explore various strategies. In this work, the permanent covalent chemical modification of microcrystalline cellulose with 1-methylimidazole is reported to provide cellulose with antimicrobial properties. The modifications were confirmed using solid-state C-NMR and Fourier Transform Infrared (FT-IR) spectroscopies. The analysis from C-NMR and elemental analysis also confirmed the successful of the chemical modification occurred at C6 after chlorination with an estimated degree of substitution of 17%. The surface charge density of this cellulosic derivative was determined using ζ potential measurements, which confirmed its cationization. The crystalline and thermal properties of the resulting cellulose derivative were evaluated using X-ray diffraction and thermogravimetric analysis (TGA), respectively. Finally, the antimicrobial activity of the obtained cationic cellulose was assessed against both Gram-positive (Staphylococcus epidermidis) and Gram-negative (Pseudomona aeruginosa) bacteria, giving a reduction of > 99.99% and 99.6%, respectively., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. We acknowl- edge grants PID2021-123553OA-I00 and PID2019-104600RB- I00 funded by MCIN, the Agencia Estatal de Investigación (AEI) and ERDF A way of making Europe. We also acknowl- edge CSIC Interdisciplinary Thematic Platform Salud Global + for financial support. I.A. acknowledges CSIC for the JAE Intro grant (JAEINT_21_02321). R.B acknowledges for her “Juan de la Cierva” contract (FJC2021-046585-I) funded by MCIN/AEI/101.13039/501100011033 and the European Union “NextGenerationEU”/PRTR and C.E. acknowledges CSIC for the incorporation project 202260I149.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase transitions in mixtures based on poly(lactic acid) and two polymeric nucleants processed under a fast or slow cooling from the melt

  • Barranco-García, Rosa
  • Muñoz-Bonilla, Alexandra
  • Cerrada, María L.
  • Echeverría, Coro
  • Fernández-García, Marta
Mixtures based on two different poly(lactic acid)s (PLA) matrices and two distinct nucleating agents, incorporated at several contents, were prepared by extrusion. Furthermore, two thermal treatments were applied during the processing of films from the melt: a quenching (Q) and a slow (S) cooling. Crystalline characteristics of the resultant polymeric systems were mainly triggered by the PLA matrix used and by the cooling rate applied, turning out less important the nature of the nucleant. Thus, stereocomplex crystals were developed almost exclusively in the Q samples while coexistence of homo and stereocomplex crystallites was noticed when slow cooling was imposed. The type of homocrystallites present in the specimens was also dependent on the cooling rate applied during film processing. In the Q systems, crystals were grown on heating through a cold crystallization, as observed by differential scanning calorimetry; while they were developed along the cooling stage in the S materials. Influence of these structural characteristics on mechanical response was also evaluated by microhardness measurements., This work was funded by the Ministerio de Ciencia e Innovación (projects PID2020-114930GB-I00, PID2021-123553OA-I00 and PID2022-136516OB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) as well as PTI Salud Global belonging to CSIC. R.B.-G. thanks the Ministerio de Ciencia e Innovación for her Juan de la Cierva contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geles poliméricos. 1. Algunos conceptos básicos y reología de geles

  • Echeverría, Coro
  • Mijangos, Carmen
Los geles poliméricos están constituidos por polímero y disolvente y poseen tanto las propiedades cohesivas de los sólidos como las propiedades de transporte de los líquidos. Esta dualidad permite modular la actividad de los geles de forma controlada y elucidar aspectos estructurales de los mismos. Los geles abarcan un gran espectro de diferentes polímeros (sintéticos y de origen natural), disolventes (el agua es el más común: hidrogeles), tamaños (macro-, micro- y nanogeles) y propiedades específicas, muy atractivas de cara a sus aplicaciones. El estudio de las propiedades viscoelásticas y la aplicación de distintos modelos permite conocer su organización estructural. Los geles han demostrado su utilidad como sistemas eficaces de almacenaje/incorporación de disolventes y otros componentes, liberación de fármacos y en hipertermia magnética, entre otros. Este trabajo resume muy brevemente algunos conceptos y se centra en las propiedades reológicas donde se han recogido los modelos y teorías más relevantes aplicadas tanto a geles como a microgeles poliméricos, Polymer gels, made up of polymer and solvent, have both the cohesive properties of solids and the transport properties of liquids. This duality allows modulating the activity of the gels in a controlled way and elucidating their structural aspects. Gels cover a wide spectrum of different polymers (synthetic and natural), solvents (water is the most common: hydrogels), sizes (macro-, micro- and nanogels) and specific properties, very attractive for their applications. The study of the viscoelastic properties and the application of different models, allows knowing its structural organization. Gels have demonstrated their importance as efficient storage/incorporation systems for solvents and other components, drug release and magnetic hyperthermia, among others. This work briefly summarizes some concepts and focuses on the rheological properties, where the most relevant models and theories applied to both gels and polymeric microgels have been collected, Las autoras agradecen al Ministerio de Ciencia e Innovación la concesión de los proyectos PID2021-123553OA-I00 y PID2020-113045GB-C22 y al CSIC el proyecto de incorporación 202260I149, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced antimicrobial activity of cellulose nanocrystals with added triazole and imidazolium groups

  • Echeverría, Coro
  • Ayensa, Naroa
  • Barranco-García, Rosa
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
The development of sustainable materials with active functionalities is crucial for advancing a circular economy. Cellulose nanocrystals (CNCs), derived from the most abundant biopolymer, offer a renewable and biocompatible platform for such materials. In this work, CNCs were chemically modified with imidazolium and triazole-imidazolium cations to create sustainable antimicrobial agents. The strategies involved chlorination of CNCs, followed by two approaches, i) substitution with N-methyl imidazolium (MI) groups to obtain CNC-MI, or ii) a click chemistry reaction for triazole-imidazolium (TrMI) modification to obtain CNC-TrMI. The analysis of the modified CNCs using Fourier transform infrared spectroscopy (FTIR), elemental analysis, and solid-state nuclear magnetic resonance (ssNMR) confirmed the successful modifications, resulting in CNC-MI showing a 30% degree of substitution, and CNC-TrMI demonstrating a 50% degree of substitution. However, such modifications affected both the structure and thermal stability of the CNCs as determined by X-ray diffraction (XRD) and thermogravimetric analysis (TGA). Nevertheless, the resulting cationic CNC derivatives, confirmed by Zeta potential analysis, exhibited remarkable antimicrobial activity against both Gram-positive Staphylococcus epidermidis and Gram-negative Pseudomonas aeruginosa. In particular CNC-TrMI exhibited excellent activity giving a reduction of more than 99.99% against both bacteria., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. Ministerio de Ciencia e Innovación, PID2021-123553OA-I00, FJC2021 046585-I, PID2022-136516OB-I00, PID2022-136516OB-I00., Peer reviewed