Pasar al contenido principal

NUEVOS MATERIALES, SONDAS Y SISTEMAS ELECTRONICOS PARA LA DETECCION DE DROGAS Y APLICACIONES BIOMEDICAS

PID2021-126304OB-C44

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Influence of the Structure of Cotton Fabrics on the Adhesion of Conductive Polymer Printed with 3D Printing Technology

  • Silvestre, Rocío
  • Garcia-Breijo, Eduardo|||0000-0002-9745-8485
  • FERRI PASCUAL, JOSUÉ|||0000-0002-8084-6182
  • Montava-Seguí, Ignacio|||0000-0001-6564-813X
  • Bou-Belda, Eva|||0000-0003-1461-9296
[EN] Three-dimensional printing technology is being increasingly applied in a multitude of sectors. However, this technology is not generally applied in the same way as in other sectors, possibly due to the difficulty of adhesion between the polymer and the textile substrate. A textile garment is subjected to wear and tear during its lifetime, and a low tensile strength or rubbing resistance hinders a garment in most of the applications of this type of research. This study examined the influence of the characteristics of the cotton textile substrate, such as the weave structure and the yarn thickness, on the tensile strength of a 3D-printed element with conductive filament. Starting from the fabric with the highest tensile strength, different prints were made using this technology to incorporate conductive and heating properties into the fabric. The results validate the possibility of providing new properties to the textile by means of this technology; however, the correct selection of the textile used as a base substrate is important., This work was supported by the Spanish Government FEDER funds (PID2021-126304OB-C44) (MINECO/FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-barrier biosensing using native printed circuit board solder mask

  • Pastor Navarro, Nuria
  • Pérez-Reinoso, Miguel
  • Noguera Murray, Patricia Silvestre|||0000-0001-7155-0710
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Hernández-Maciá, Miriam
  • Gimenez-Romero, David
[EN] Although printed circuit board (PCB) biosensors hold promise for ultra-low-cost diagnostics, their widespread implementation is limited by the need for noble-metal electrodes, whose fabrication requires additional processing steps beyond standard PCB manufacturing (e.g., photolithography), substantially increasing device cost. Here, we present a new strategy to repurpose standard industrial PCBs for low-barrier, cost-effective biosensing by imparting functionality to the native epoxy solder mask through surface functionalization that enables selective recognition of target analytes. The solder mask is directly functionalized using 3-mercaptopropionic acid and EDC/NHS chemistry, enabling stable covalent immobilization of bioreceptors and transforming it into a functional recognition element, thereby eliminating the complex fabrication required in typical PCB biosensors. Bound analytes are detected through a frequency-dependent impedance response arising from the distributed capacitive behavior between the solder mask and the underlying copper-based printed circuit. While validated with impedance spectroscopy using bovine serum albumin (BSA) as a model, this functionalized interface can be tailored to detect a wide range of selected targets. The biofunctionalized solder mask surface demonstrates excellent spatial uniformity (<10% variability) and highly sensitive anti-BSA detection below 10 ppb (p < 0.001). By enabling covalent immobilization of recognition elements directly on commercial PCBs, this approach harnesses standard industrial fabrication to deliver accessible, high-performance biosensors for diagnostics and real-time environmental monitoring, marking a major advance in miniaturized, scalable biosensor platforms., This work was supported by Project PID2021-126304OB-C44 funded by MCIN/AEI/10.13039/501100011033 and by FEDER, EU, and by Project PID2024-155683OB-C44 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximizing Electrochemical Information: A Perspective on Background-Inclusive Fast Voltammetry

  • Movassaghi, Cameron S.
  • Kishida, Kenneth T.
  • McCarty, Gregory
  • Sombers, Leslie A.
  • Wassum, Kate M.
  • Andrews, Anne M.
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
[EN] This perspective encompasses a focused review of the literature leading to a tipping point in electroanalytical chemistry. We tie together the threads of a ¿revolution¿ quietly in the making for years through the work of many authors. Longheld misconceptions about the use of background subtraction in fast voltammetry are addressed. We lay out future advantages that accompany background-inclusive voltammetry, particularly when paired with modern machine-learning algorithms for data analysis., The authors would like to thank Dr. Ruben Alvarez at the National Institute of Mental Health for brainstorming the early idea for this work. C.S.M. was supported by the National Science Foundation Graduate Research Fellowship Program (DGE-1650604 and DGE-2034835). This research was supported by the Spanish Ministry of Science, Innovation, and Universities under project number PID2021-126304OB-C44. Support is also acknowledged from the National Institutes of Health Grants DA045550 (A.M.A.), MH121099 (K.T.K.), DA048096 (K.T.K.), MH124115 (K.T.K.), DA006634 (K.T.K.), KL2TR001420 (K.T.K.), and R44MH119870 (L.A.S., G.M.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LC biosensors (Bio-LC): new resonant sensors for direct detection of airborne viruses

  • Noguera Murray, Patricia Silvestre|||0000-0001-7155-0710
  • Pastor Navarro, Nuria
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Medaglia, Serena|||0000-0003-3537-9842
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Giménez-Romero, David
[EN] Viruses suspended in the air are key in the transmission of infectious diseases. We present a label-free selective system capable of detecting in situ airborne viruses in ambient air, employing resonant LC (Inductor-Capacitator) circuits. As proof of principle, M13 bacteriophages were nebulized and monitored with this sensor. The selective recognition of viruses by the copper immune-functionalized inductor of an LC circuit resulted in shifts of its resonant frequency proportional to the virus ambient concentration. The selectivity of this resonator is due to the employed bioreceptor. So, the lowest ambient concentration of airborne M13 bacteriophage that can be selectively detected is 3 x 105 pfu L- 1. This biosensing approach opens appealing perspectives for controlling the transmission of infectious diseases., The authors thank E.M.N. from IVIA for providing the E. coli strain culture and H.M.R. from ETSIAM-UPV for the use of the climate chamber. Additionally, gratitude is extended to the Electron Microscopy Service at UPV for their support. This research received support from projects PID2021-126304OBC44 and PID2021-128141OB-C22, funded by MCIN/AEI (Ref:/10.13039/501100011033/), project PROMETEO CIPROM/2021/007, funded by Generalitat Valenciana, and the European Regional Development Fund-A way of doing Europe. Additionally, it was supported by project PAID-PD-22, funded by Universitat Politecnica de Valencia (UPV). A.B. expresses gratitude for her BG20/00020 contract from MCIN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Finite Element Models of Gold Nanoparticles and Their Suspensions for Photothermal Effect Calculation

  • Terrés-Haro, José Manuel|||0000-0001-5794-7332
  • Monreal-Trigo, Javier|||0000-0002-4067-1867
  • Hernández-Montoto, Andy|||0000-0001-5623-9836
  • Ibáñez Civera, Francisco Javier|||0000-0002-1035-2662
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] (1) Background: The ability of metal nanoparticles to carry other molecules and their electromagnetic interactions can be used for localized drug release or to heat malignant tissue, as in the case of photothermal treatments. Plasmonics can be used to calculate their absorption and electric field enhancement, which can be further used to predict the outcome of photothermal experiments. In this study, we model the nanoparticle geometry in a Finite Element Model calculus environment to calculate the effects that occur as a response to placing it in an optical, electromagnetic field, and also a model of the experimental procedure to measure the temperature rise while irradiating a suspension of nanoparticles. (2) Methods: Finite Element Method numerical models using the COMSOL interface for geometry and mesh generation and iterative solving discretized Maxwell's equations; (3) Results: Absorption and scattering cross-section spectrums were obtained for NanoRods and NanoStars, also varying their geometry as a parameter, along with electric field enhancement in their surroundings; temperature curves were calculated and measured as an outcome of the irradiation of different concentration suspensions; (4) Conclusions: The results obtained are comparable with the bibliography and experimental measurements., This research was funded by the Spanish State Research Agency project numbers RTI2018-100910-B-C43-AR, PID2021-126304OB-C44 and PID2021-126304OB-C41, Generalitat Valenciana project PROMETEO CIPROM/2021/007, Instituto de Salud Carlos III-CIBER-BBN: Safe N Medtech and Smart-4-Fabry Projects (European Union s H2020 Framework Programme (H2020/2014-2020), grant agreement 814607) and the Spanish Ministry of Science and Innovation with the predoctoral grants number FPU17/03800 and FPU17/03239 to J.M.T.-H. and J.M.T., respectively. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SeroWare: An Open-Source Software Suite for Voltammetry Data Acquisition and Analysis

  • Movassaghi, Cameron S.
  • Iyer, Rahul
  • Curry, Maya E.
  • Wesely, Mila E.
  • Andrews, Anne M.
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
[EN] Voltammetry is widely used for fast, data-dense measurements of redox-active analytes in versatile environments, including the brain. Voltammetry requires minimalhardware beyond a potentiostat, a front-end amplifier, and a computer. Nonetheless,researchers must often develop or modify software packages for application-specific uses. Ofthe voltammetry software available, significant issues exist with source code inaccessible forupdating or customization, nonconfigurable data processing procedures, and hardwareincompatibilities. These limitations, coupled with the recent proliferation of waveform typesand increased demands for high bandwidth data acquisition and efficient data processing,create the need for sophisticated, powerful, and flexible voltammetry software. We reportdeveloping ¿SeroWare¿, an open-source, end-to-end voltammetry acquisition and analysissoftware package designed to handle a wide variety of use cases encountered byvoltammetry users. Although inspired by neurochemical analyses, this software is flexible,customizable, and compatible with open-source toolkits. The modular software architectureenables users to generate, acquire, and analyze voltammetry data of different types, rangingfrom pulse and sweep waveforms to fast and slow scans via easily accessible and exportable file formats. Template code is providedfor communicating with a variety of standard external devices. We report several novel features for waveform applications and dataflow. In-depth documentation in a User Guide and video tutorials are provided to enable new research directions, particularlyregarding shareability and lowering the barriers to entry for new investigators, C.S.M. was supported by the National Science Foundation Graduate Research Fellowship Program (DGE-1650604 and DGE-2034835). The authors would also like to acknowledge the support of the National Institute on Drug Abuse (DA045550), the National Science Foundation (CHE 2404470), and the Spanish Ministry of Science, Innovation, and Universities (PID2021-126304OB-C44). Any opinions, findings, conclusions, or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation or the National Institutes of Health.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Machine-learning-guided design of electroanalytical pulse waveforms

  • Movassaghi, Cameron S.
  • Perrotta, Katie A.
  • Curry, Maya E.
  • Nashner, Audrey N.
  • Nguyen, Katherine K.
  • Wesely, Mila E.
  • Liu, Chong
  • Meyer, Aaron S.
  • Andrews, Anne M.
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
[EN] Voltammetry is widely used to detect and quantify oxidizable or reducible species in complex environments. The neurotransmitter serotonin epitomizes an analyte that is challenging to detect in situ due to its low concentrations and the co-existence of similarly structured analytes and interferents. We developed rapid-pulse voltammetry for brain neurotransmitter monitoring due to the high information content elicited from voltage pulses. Generally, the design of voltammetry waveforms remains challenging due to prohibitively large combinatorial search spaces and a lack of design principles. Here, we illustrate how Bayesian optimization can be used to hone searches for optimized rapid pulse waveforms. Our machine-learning-guided workflow (SeroOpt) outperformed random and human-guided waveform designs and is tunable a priori to enable selective analyte detection. We interpreted the black box optimizer and found that the logic of machine-learning-guided waveform design reflected domain knowledge. Our approach is straightforward and generalizable for all single and multi-analyte problems requiring optimized electrochemical waveform solutions. Overall, SeroOpt enables data-driven exploration of the waveform design space and a new paradigm in electroanalytical method development., This work was supported by the National Science Foundation (CHE-2404470). CSM was supported by the National Science Foundation Graduate Research Fellowship Program (DGE-1650604 and DGE-2034835). Any opinions, findings, conclusions, or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation. This research was also supported by the Spanish Ministry of Science, Innovation, and Universities under project number PID2021-126304OB-C44. The authors acknowledge Biorender.com (http://Biorender.com) for the Table of Contents graphic and Fig. 7. See: https://BioRender.com/fxn08n1 and https://BioRender.com/lre0n7d.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Inductor-Based Biosensors for Real-Time Monitoring in the Liquid Phase

  • Cantero-García, Marcos
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Pastor Navarro, Nuria
  • Noguera Murray, Patricia Silvestre|||0000-0001-7155-0710
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Hernández-Maciá, Miriam
  • Gimenez-Romero, David
[EN] Current liquid-phase resonant biosensors, such as Quartz Crystal Microbalance, Surface Acoustic Wave, or Surface Plasmon Resonance, typically rely on specialized piezoelectric substrates or complex optical setups. These requirements often necessitate cleanroom fabrication, thereby limiting cost-effective scalability. This study presents a high-integration sensing platform based on standard Printed Circuit Board (PCB) technology, incorporating an embedded inductor within a fluidic system for real-time monitoring. This design leverages industrial manufacturing standards to achieve a compact, low-cost, and scalable architecture. Detection is governed by shifts in the resonance frequency of an LC tank circuit; specifically, increases in bulk ionic strength induce a frequency decrease, whereas biomolecular adsorption at the sensor surface leads to a frequency increase. This phenomenon can be explained by the modulation of the inter-turn capacitance, which is modeled as a combination of capacitive elements accounting for contributions from the bulk electrolyte and the surface-bound dielectric layer. Such divergent responses provide an intrinsic self-discriminating capability, allowing for the analytical differentiation between surface interactions and bulk effects. To the best of our knowledge, this is the first demonstration of an inductor-based resonant sensor fully embedded in a PCB fluidic architecture for continuous liquid-phase analyte monitoring. Validated through a protein-antibody model (Bovine Serum Albumin-anti-Bovine Serum Albumin), the sensor demonstrated a limit of detection of 1.7 ppm (0.026 mM) and a linear dynamic range of 31-211 ppm (0.47-3.2 mM). These performance metrics, combined with a reproducibility of 4 +/- 3%, indicate that the platform meets the requirements for robust analytical applications. Its inherent simplicity and potential for miniaturization position this technology as a viable candidate for point-of-care diagnostics in diverse environments., This work was supported in part by the Spanish Ministry of Science and Innovation under grant PID2021-126304OB-C44 and the Spanish Ministry of Science, Innovation and Universities under grant PID2024-155683OB-C44.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optogenetic Stimulation Array for Confocal Microscopy Fast Transient Monitoring

  • Monreal-Trigo, Javier|||0000-0002-4067-1867
  • Terrés-Haro, José Manuel|||0000-0001-5794-7332
  • Giraldo, Esther|||0000-0001-5488-3011
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Martínez-Rojas, Beatriz
  • Sánchez-Martín, Maria del Mar
  • Moreno Manzano, Victoria
[EN] Optogenetics is an emerging discipline with multiple applications in neuroscience, allowing to study neuronal pathways or serving for therapeutic applications such as in the treatment of anxiety disorder, autism spectrum disorders (ASDs), or Parkinson's disease. More recently optogenetics is opening its way also to stem cell-based therapeutic applications for neuronal regeneration after stroke or spinal cord injury. The results of optogenetic stimulation are usually evaluated by immunofluorescence or flow cytometry, and the observation of transient responses after stimulation, as in cardiac electrophysiology studies, by optical microscopy. However, certain phenomena, such as the ultra-fast calcium waves acquisition upon simultaneous optogenetics, are beyond the scope of current instrumentation, since they require higher image resolution in real-time, employing for instance time-lapse confocal microscopy. Therefore, in this work, an optogenetic stimulation matrix controllable from a graphical user interface has been developed for its use with a standard 24-well plate for an inverted confocal microscope use and validated by using a photoactivable adenyl cyclase (bPAC) overexpressed in rat fetal cortical neurons and the consequent calcium waves propagation upon 100 ms pulsed blue light stimulation., This work was supported in part by MCIN/AEI//10.13039/5011000110-33 under Grants PID2021-126304OB-C44 and PID2021-124359OB-I00, in part by the ERDF A Way of Making Europe, and in part by under Fet Open Program under Project 964562 H2020. The work of Beatriz Martinez-Rojas was supported by the Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana and the European Social Fundation under Grant ACIF/2019/120. The work of Javier Monreal-Trigo andJose Manuel Terres-Haro was supported by the Spanish Ministry of Science,Innovation, and Universities for their Doctoral under Grants FPU17/03239 and FPU17/03800.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distributed Embedded System for Multiparametric Assessment of Infrastructure Durability Using Electrochemical Techniques

  • Monreal-Trigo, Javier|||0000-0002-4067-1867
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Ramón, José Enrique
  • Bataller, Román
  • Soto Camino, Juan
[ES] Presentamos un sistema autónomo que monitoriza de forma remota el estado de las estructuras de hormigón armado. Este sistema realiza un seguimiento en tiempo real de la tasa de corrosión de las barras de refuerzo (iCORR), junto con otros parámetros relevantes como la temperatura, el potencial de corrosión (ECORR) y la resistencia eléctrica del hormigón (RE), en varios puntos de control de la estructura utilizando sensores incrustados. El valor de iCORR se obtiene aplicando una nueva técnica de polarización electroquímica de bajo estrés a los sensores de corrosión. El sistema electrónico personalizado gestiona la red de sensores, que consiste en una placa de medición por cada punto de control conectada a un ordenador de placa única central encargado de procesar los datos de medición y subir los resultados a un servidor mediante una conexión 4G. En este trabajo, reportamos los resultados obtenidos tras la implementación del sistema de sensores en un muro de hormigón armado, donde se monitorearon dos áreas representativas bien diferenciadas. Los parámetros de corrosión obtenidos mostraron valores consistentes. Se obtuvieron conclusiones similares con los valores de ECORR registrados en las barras de refuerzo. Con el seguimiento de iCORR, se construyó un diagrama de penetración del daño por corrosión. Este diagrama es particularmente útil para identificar eventos críticos durante el periodo de propagación de la corrosión y para estimar la vida útil de las estructuras. Por lo tanto, el sistema se presenta como una herramienta útil para el mantenimiento estructural y las predicciones de vida útil de nuevas estructuras., [EN] We present an autonomous system that remotely monitors the state of reinforced concrete structures. This system performs real-time follow-up of the corrosion rate of rebars (iCORR), along with other relevant parameters such as temperature, corrosion potential (ECORR), and electrical resistance of concrete (RE), at many of a structure¿s control points by using embedded sensors. iCORR is obtained by applying a novel low-stress electrochemical polarization technique to corrosion sensors. The custom electronic system manages the sensor network, consisting of a measurement board per control point connected to a central single-board computer in charge of processing measurement data and uploading results to a server via 4G connection. In this work, we report the results obtained after implementing the sensor system into a reinforced concrete wall, where two well-differentiated representative areas were monitored. The obtained corrosion parameters showed consistent values. Similar conclusions are obtained with ECORR recorded in rebars. With the iCORR follow-up, the corrosion penetration damage diagram is built. This diagram is particularly useful for identifying critical events during the corrosion propagation period and to be able to estimate structures¿ service life. Hence, the system is presented as a useful tool for the structural maintenance and service life predictions of new structures., This research was supported by the Spanish Ministry of Science, Innovation and Universities via a doctoral grant to Jose Enrique Ramon Zamora (FPU13/00911) and to Javier Monreal Trigo (FPU17/03239). Funding was also provided by the Spanish Ministry of Science and Innovation under project numbers PID2021-126304OB-C44, PID2020-119744RB-C21 and PID2020-119744RB-C22, and by the Universitat Politecnica de Valencia under project number SP20180245 'Voltammetric Electronic Tongue for Durability Control in Concrete'.