Pasar al contenido principal

NUEVOS MATERIALES, SONDAS Y SISTEMAS ELECTRONICOS PARA LA DETECCION DE DROGAS Y APLICACIONES BIOMEDICAS

PID2021-126304OB-C44

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Influence of the Structure of Cotton Fabrics on the Adhesion of Conductive Polymer Printed with 3D Printing Technology

  • Silvestre, Rocío
  • Garcia-Breijo, Eduardo|||0000-0002-9745-8485
  • FERRI PASCUAL, JOSUÉ|||0000-0002-8084-6182
  • Montava-Seguí, Ignacio|||0000-0001-6564-813X
  • Bou-Belda, Eva|||0000-0003-1461-9296
[EN] Three-dimensional printing technology is being increasingly applied in a multitude of sectors. However, this technology is not generally applied in the same way as in other sectors, possibly due to the difficulty of adhesion between the polymer and the textile substrate. A textile garment is subjected to wear and tear during its lifetime, and a low tensile strength or rubbing resistance hinders a garment in most of the applications of this type of research. This study examined the influence of the characteristics of the cotton textile substrate, such as the weave structure and the yarn thickness, on the tensile strength of a 3D-printed element with conductive filament. Starting from the fabric with the highest tensile strength, different prints were made using this technology to incorporate conductive and heating properties into the fabric. The results validate the possibility of providing new properties to the textile by means of this technology; however, the correct selection of the textile used as a base substrate is important., This work was supported by the Spanish Government FEDER funds (PID2021-126304OB-C44) (MINECO/FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Development and validation of novel senolytic strategies for targeting and eliminating senescent cells

  • Escriche Navarro, Blanca
[ES] Esta tesis doctoral titulada "Desarrollo y validación de nuevas estrategias senolíticas para la selección y eliminación de células senescentes" se centra en el diseño, síntesis y validación de nanodispositivos y profármacos para eliminar células senescentes, con el objetivo de tratar enfermedades relacionadas con el envejecimiento y el cáncer. En el primer capítulo experimental, presentamos un nanodispositivo para eliminar selectivamente células senescentes explotando la actividad enzimática específica del secretoma senescente. Los resultados mostraron que tras la inducción de senescencia en fibroblastos WI-38 proliferantes con radiación ionizante, las células secretan altos niveles de metaloproteinasa de matriz 3 (MMP-3). Basándose en esto, se cargaron MSNs con navitoclax y se recubrieron con un péptido específico de MMP-3 ( "puerta molecular"), obteniendo NPs(Nav)@MMP-3. Los estudios celulares demostraron una liberación preferencial de la carga en células senescentes en comparación con células proliferantes. Además, el tratamiento de células senescentes con NPs(Nav)@MMP-3 indujo una disminución de la viabilidad celular similar a la del navitoclax, mientras que se observó un efecto protector sobre las células proliferantes. Partiendo de estos resultados en el segundo capítulo experimental describimos una nanopartícula para terapia senolítica mediada por células inmunitarias. Para ello, las nanopartículas recubiertas con el péptido específico de MMP-3 se decoraron con la quimioquina CXCL12 (NPs@CXCL12), potenciando el reclutamiento de células inmunitarias al microambiente senescente. Se verificó la liberación progresiva y específica de la proteína CXCL12 en presencia de MMP-3 mediante ensayos de liberación controlada. Posteriormente, se confirmó la capacidad de las nanopartículas para atraer células T Jurkat a un microambiente senescente mediante ensayos de migración. Los resultados revelaron que las NPs@CXCL12 ejercían un efecto quimiotáctico más significativo que la CXCL12 libre. Además, también se evaluó la capacidad de las células asesinas naturales primarias humanas para eliminar WI-38 senescentes, y se monitorizaron sus trayectorias de migración en respuesta a NPs@CXCL12 o CXCL12 libre utilizando un dispositivo de microfuídica. En el capítulo experimental tres, nos centramos en el diseño de un nanodispositivo dirigido al surfaceoma senescente. En concreto, demostramos que la inducción de la senescencia con palbociclib en células de melanoma humano desarrollaba un fenotipo senescente con sobreexpresión de dipeptidil peptidasa-4 (DPP4).Aquí, se cargaron MSNs con navitoclax, se cubrieron con polietilenglicol que contiene disulfuro ("puerta molecular" sensible a redox) y se funcionalizaron con un anticuerpo contra DPP4. La eficacia de las NPs(Nav)@DPP4-PE en la detección y eliminación de células senescentes se validó in vitro e in vivo utilizando un modelo murino de melanoma senescente inducido por palbociclib. El tratamiento redujo significativamente el crecimiento tumoral y eliminó preferentemente las células senescentes. En el cuarto capítulo experimental, investigamos el potencial de la terapia fotodinámica para la detección y eliminación de células senescentes. Para ello, se sintetizó un fotosensibilizador (compuesto 1) basado en boro-dipirrometeno (BODIPY) activado con ß-galactosidasa asociada a senescencia (SA-ß-gal). El compuesto 1 permanece inactivo hasta que la hidrólisis de la galactosa por la enzima SA-ß-gal restaura la emisión de fluorescencia y la generación de oxígeno singlete. La restauración de la fluorescencia, la capacidad de producir especies reactivas de oxígeno y de matar células senescentes en presencia de luz en el compuesto 1 se demostró en modelos de senescencia inducida por terapia in vitro e in vivo. Además, los estudios revelaron que el compuesto 1 desencadena un potente efecto senolítico tras la irradiación de tumores senescentes en modelos de ratón., [CA] Esta tesi doctoral titulada "Desenvolupament i validació de noves estratègies senolítiques per a la selecció i eliminació de cèl·lules senescents" se centra en el disseny, síntesi i validació de nanodispositius i profàrmacs per a eliminar cèl·lules senescents, amb l'objectiu de tractar malalties relacionades amb l'envelliment i el càncer. En el primer capítol experimental, presentem un nanodispositiu per a eliminar selectivament cèl·lules senescents explotantl'activitat enzimàtica específica del secretoma senescent. Els resultats van mostrar que després de la inducció de senescència en fibroblasts WI-38 proliferants amb radiació ionitzant, les cèl·lules secreten alts nivells de metaloproteinasa de matriu 3 (MMP-3). Basant-se en això, es van carregar MSNs amb navitoclax i es van recobrir amb un pèptid específic de MMP-3 ("porta molecular"), obtenint NPs(Nav)@MMP-3. Els estudis cel·lulars van demostrar un alliberament preferencial de la càrrega en cèl·lules senescents en comparació amb cèl·lules proliferants. A més, el tractament de cèl·lules senescents amb NPs(Nav)@MMP-3 va induir una disminució de la viabilitat cel·lular similar a la del navitoclax, mentres que es va observar un efecte protector sobre les cèl·lules proliferants. Partint déstos resultats en el segon capítol experimental descrivim una nanopartícula per teràpia senolítica mediada per cèl·lules immunitàries. Per a això, les nanopartícules recobertes amb el pèptid específic de MMP-3 es van decorar amb la quimioquina CXCL12 (NPs@CXCL12), potenciant el reclutament de cèl·lules immunitàries al microambient senescent. Ees va verificar l'alliberament progressiu i específic de la proteïna CXCL12 de la bastida en presència de MMP-3 mitjançant assajos d'alliberament controlat. Posteriorment, es va confirmar la capacitat de les nanopartícules per a atraure cèl·lules T Jurkat a un microambient senescent mitjançant assajos de migració. Els resultats van revelar que les NPs@CXCL12 exercien un efecte quimiotàctic més significatiu que la CXCL12. A més, també es va avaluar la capacitat de les cèl·lules assassines naturals primàries humanes per a eliminar WI-38 senescents, i es van monitorar les seues trajectòries de migració en resposta a NPs@CXCL12 o CXCL12 utilitzant un dispositiu de microfuidica. En el capítol experimental tres, ens centrem en el disseny d'un nanodispositiu dirigit al surfaceoma senescent. En concret, vam demostrar que la inducció de la senescència amb palbociclib en cèl·lules de melanoma humà presentava un fenotip senescent amb sobreexpresión de dipeptidil peptidasa-4 (DPP4). Basant-se en esta troballa, es van carregar MSNs amb navitoclax, es van cobrir amb polietilenglicol que conté disulfur, ("porta molecular" sensible a redox) i es van funcionalitzar amb un anticòs contra DPP4. L'eficàcia de les NPs(Nav)@DPP4-PE en la detecció i eliminació de cèl·lules senescents es va validar in vitro i in vivo utilitzant un model murin de melanoma senescent induït per palbociclib.El tractament va reduir significativament el creixement tumoral i va eliminar preferentment les cèl·lules senescents, com van indicar els biomarcadores de senescència analitzats. En el quart capítol experimental, investiguem el potencial de la teràpia fotodinámica per a la detecció i eliminació de cèl·lules senescents. Per a això, es va sintetitzar un fotosensibilizador (compost 1) basat en bor-dipirrometeno activat amb ß-galactosidasa associada a senescència (SA-ß-gal). El 1 roman inactiu fins que la hidròlisi de la galactosa per SA-ß-gal restaura l'emissió de fluorescència i la generació d'oxigen singlete. La restauració de la fluorescència, la capacitat de produir espècies reactives d'oxigen i de matar cèl·lules senescents en presència de llum en el 1 es va demostrar en models de senescència induïda per teràpia in vitro i in vivo. A més, els estudis van revelar que el 1 desencadena un potent efecte senolítico després de la irradiació de tumors senescents en models de ratolí., [EN] This PhD thesis entitled "Development and validation of novel senolytic strategies for targeting and eliminating senescent cells" focuses on the design, synthesis, and validation of nanodevices and prodrugs to eliminate senescent cells, to treat diseases related to aging and cancer. In the first experimental chapter, we present a nanodevice to selectively remove senescent cells by exploiting the specific enzymatic activity of the senescent secretome. The results showed that after the induction of senescence in proliferating WI-38 fibroblasts with ionizing radiation, the cells secrete high levels of matrix metalloproteinase-3 (MMP-3). Based on this, MSNs were loaded with navitoclax and coated with a specific peptide; a substrate of MMP-3 (gatekeeper), yielding NPs(Nav)@MMP-3. Cellular studies demonstrated preferential cargo release in senescent cells compared to proliferating cells. Furthermore, treatment of senescent cells with NPs(Nav)@MMP-3 induced a decrease in cell viability similar to that of free navitoclax, while a protective effect on proliferating cells was observed. Building on these results, in the second experimental chapter, we describe a nanoparticle for immune cell-mediated senolytic therapy. To this end, MSNs coated with the specific peptide MMP-3 were decorated with the chemokine CXCL12 (NPs@CXCL12), enhancing immune cells' recruitment to the senescent microenvironment. First, the progressive and specific release of CXCL12 protein from the scaffold in the presence of MMP-3 was verified by controlled release assays. Subsequently, the ability of the nanoparticles to attract Jurkat T cells to a senescent microenvironment was confirmed by migration assays. The results revealed that NPs@CXCL12 exerted a more significant chemotactic effect than free CXCL12. In addition, the ability of human primary natural killer cells to clear senescent WI-38 was also evaluated, and their migration trajectories were monitored in response to NPs@CXCL12 or free CXCL12 using a microfluidic device. In experimental chapter three, we focused on the design of a nanodevice targeting senescent surfaceome. Specifically, the research proved that the induction of senescence with palbociclib in human melanoma cells developed a senescent phenotype characterized by the up-regulated expression of dipeptidyl peptidase 4 (DPP4). Based on this finding, MSNs were loaded with navitoclax, capped with disulfide-containing polyethylene glycol (redox-sensitive gatekeeper) and finally functionalized with an antibody that recognized the DPP4 protein. The efficacy of NPs(Nav)@DPP4-PE in detecting and eliminating senescent cells was validated in vitro and in vivo using a mouse model of palbociclib-induced senescent melanoma. Furthermore, treatment of mice with the DPP4-targeted nanoparticle significantly reduced tumor growth, and preferentially removed senescent cells, as indicated by the senescence biomarkers analyzed. In the fourth experimental chapter, we investigated the potential of photodynamic therapy for the detection and eradication of senescent cells. For this purpose, a boron dipyrromethene-based photosensitizer (BODIPY) activated with senescent-associated ß-galactosidase (SA-ß-gal) (compound 1) was synthesized. Compound 1 contains a galactose moiety bound to a BODIPY, so it remains inactive until galactose hydrolysis by the SA-ß-gal enzyme restores fluorescence emission and singlet oxygen generation. The restoration of fluorescence, the ability to produce reactive oxygen species, and to kill senescent cells in the presence of light in compound 1 was demonstrated in models of therapy-induced senescence in vitro and in vivo. Furthermore, studies in palbociclib-induced senescent melanoma mouse models reveal that the galactose-conjugated photosensitizer triggers a potent senolytic effect upon irradiation of senescent tumors., This research was supported by projects PID2021-126304OB-C41 and PID2021-128141OB-C22 funded by MCIN/ AEI /10.13039/501100011033/ and by EuropeanRegional Development Fund - A way of doing Europe. This study was also supported byGeneralitat Valenciana (CIPROM/2021/007). This research was supported by CIBER(CB06/01/2012), Instituto de Salud Carlos III, and Ministerio de Ciencia e Innovación. Thiswork was also supported by the European Research Council (ERC) via Advanced Grant (101052997, EDISON). B.E-N. is grateful to the Instituto de Salud Carlos III (ISCIII) for the grant through the project “IFI19/00026”, co-funded by the European Union and the company Senolytic Therapeutics S.L for the support. E.G. is grateful to the Spanish MIU and European Union-Next Regeneration EU for her “Margarita Salas” postdoctoral grant (UP2021-036).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Low-barrier biosensing using native printed circuit board solder mask

  • Pastor Navarro, Nuria
  • Pérez-Reinoso, Miguel
  • Noguera Murray, Patricia Silvestre|||0000-0001-7155-0710
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Hernández-Maciá, Miriam
  • Gimenez-Romero, David
[EN] Although printed circuit board (PCB) biosensors hold promise for ultra-low-cost diagnostics, their widespread implementation is limited by the need for noble-metal electrodes, whose fabrication requires additional processing steps beyond standard PCB manufacturing (e.g., photolithography), substantially increasing device cost. Here, we present a new strategy to repurpose standard industrial PCBs for low-barrier, cost-effective biosensing by imparting functionality to the native epoxy solder mask through surface functionalization that enables selective recognition of target analytes. The solder mask is directly functionalized using 3-mercaptopropionic acid and EDC/NHS chemistry, enabling stable covalent immobilization of bioreceptors and transforming it into a functional recognition element, thereby eliminating the complex fabrication required in typical PCB biosensors. Bound analytes are detected through a frequency-dependent impedance response arising from the distributed capacitive behavior between the solder mask and the underlying copper-based printed circuit. While validated with impedance spectroscopy using bovine serum albumin (BSA) as a model, this functionalized interface can be tailored to detect a wide range of selected targets. The biofunctionalized solder mask surface demonstrates excellent spatial uniformity (<10% variability) and highly sensitive anti-BSA detection below 10 ppb (p < 0.001). By enabling covalent immobilization of recognition elements directly on commercial PCBs, this approach harnesses standard industrial fabrication to deliver accessible, high-performance biosensors for diagnostics and real-time environmental monitoring, marking a major advance in miniaturized, scalable biosensor platforms., This work was supported by Project PID2021-126304OB-C44 funded by MCIN/AEI/10.13039/501100011033 and by FEDER, EU, and by Project PID2024-155683OB-C44 funded by MICIU/AEI/10.13039/501100011033 and by FEDER, EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Maximizing Electrochemical Information: A Perspective on Background-Inclusive Fast Voltammetry

  • Movassaghi, Cameron S.
  • Kishida, Kenneth T.
  • McCarty, Gregory
  • Sombers, Leslie A.
  • Wassum, Kate M.
  • Andrews, Anne M.
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
[EN] This perspective encompasses a focused review of the literature leading to a tipping point in electroanalytical chemistry. We tie together the threads of a ¿revolution¿ quietly in the making for years through the work of many authors. Longheld misconceptions about the use of background subtraction in fast voltammetry are addressed. We lay out future advantages that accompany background-inclusive voltammetry, particularly when paired with modern machine-learning algorithms for data analysis., The authors would like to thank Dr. Ruben Alvarez at the National Institute of Mental Health for brainstorming the early idea for this work. C.S.M. was supported by the National Science Foundation Graduate Research Fellowship Program (DGE-1650604 and DGE-2034835). This research was supported by the Spanish Ministry of Science, Innovation, and Universities under project number PID2021-126304OB-C44. Support is also acknowledged from the National Institutes of Health Grants DA045550 (A.M.A.), MH121099 (K.T.K.), DA048096 (K.T.K.), MH124115 (K.T.K.), DA006634 (K.T.K.), KL2TR001420 (K.T.K.), and R44MH119870 (L.A.S., G.M.).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LC biosensors (Bio-LC): new resonant sensors for direct detection of airborne viruses

  • Noguera Murray, Patricia Silvestre|||0000-0001-7155-0710
  • Pastor Navarro, Nuria
  • Bernardos Bau, Andrea|||0000-0002-3842-5771
  • Medaglia, Serena|||0000-0003-3537-9842
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Giménez-Romero, David
[EN] Viruses suspended in the air are key in the transmission of infectious diseases. We present a label-free selective system capable of detecting in situ airborne viruses in ambient air, employing resonant LC (Inductor-Capacitator) circuits. As proof of principle, M13 bacteriophages were nebulized and monitored with this sensor. The selective recognition of viruses by the copper immune-functionalized inductor of an LC circuit resulted in shifts of its resonant frequency proportional to the virus ambient concentration. The selectivity of this resonator is due to the employed bioreceptor. So, the lowest ambient concentration of airborne M13 bacteriophage that can be selectively detected is 3 x 105 pfu L- 1. This biosensing approach opens appealing perspectives for controlling the transmission of infectious diseases., The authors thank E.M.N. from IVIA for providing the E. coli strain culture and H.M.R. from ETSIAM-UPV for the use of the climate chamber. Additionally, gratitude is extended to the Electron Microscopy Service at UPV for their support. This research received support from projects PID2021-126304OBC44 and PID2021-128141OB-C22, funded by MCIN/AEI (Ref:/10.13039/501100011033/), project PROMETEO CIPROM/2021/007, funded by Generalitat Valenciana, and the European Regional Development Fund-A way of doing Europe. Additionally, it was supported by project PAID-PD-22, funded by Universitat Politecnica de Valencia (UPV). A.B. expresses gratitude for her BG20/00020 contract from MCIN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Finite Element Models of Gold Nanoparticles and Their Suspensions for Photothermal Effect Calculation

  • Terrés-Haro, José Manuel|||0000-0001-5794-7332
  • Monreal-Trigo, Javier|||0000-0002-4067-1867
  • Hernández-Montoto, Andy|||0000-0001-5623-9836
  • Ibáñez Civera, Francisco Javier|||0000-0002-1035-2662
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
[EN] (1) Background: The ability of metal nanoparticles to carry other molecules and their electromagnetic interactions can be used for localized drug release or to heat malignant tissue, as in the case of photothermal treatments. Plasmonics can be used to calculate their absorption and electric field enhancement, which can be further used to predict the outcome of photothermal experiments. In this study, we model the nanoparticle geometry in a Finite Element Model calculus environment to calculate the effects that occur as a response to placing it in an optical, electromagnetic field, and also a model of the experimental procedure to measure the temperature rise while irradiating a suspension of nanoparticles. (2) Methods: Finite Element Method numerical models using the COMSOL interface for geometry and mesh generation and iterative solving discretized Maxwell's equations; (3) Results: Absorption and scattering cross-section spectrums were obtained for NanoRods and NanoStars, also varying their geometry as a parameter, along with electric field enhancement in their surroundings; temperature curves were calculated and measured as an outcome of the irradiation of different concentration suspensions; (4) Conclusions: The results obtained are comparable with the bibliography and experimental measurements., This research was funded by the Spanish State Research Agency project numbers RTI2018-100910-B-C43-AR, PID2021-126304OB-C44 and PID2021-126304OB-C41, Generalitat Valenciana project PROMETEO CIPROM/2021/007, Instituto de Salud Carlos III-CIBER-BBN: Safe N Medtech and Smart-4-Fabry Projects (European Union s H2020 Framework Programme (H2020/2014-2020), grant agreement 814607) and the Spanish Ministry of Science and Innovation with the predoctoral grants number FPU17/03800 and FPU17/03239 to J.M.T.-H. and J.M.T., respectively. Funding for open access charge: Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

SeroWare: An Open-Source Software Suite for Voltammetry Data Acquisition and Analysis

  • Movassaghi, Cameron S.
  • Iyer, Rahul
  • Curry, Maya E.
  • Wesely, Mila E.
  • Andrews, Anne M.
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
[EN] Voltammetry is widely used for fast, data-dense measurements of redox-active analytes in versatile environments, including the brain. Voltammetry requires minimalhardware beyond a potentiostat, a front-end amplifier, and a computer. Nonetheless,researchers must often develop or modify software packages for application-specific uses. Ofthe voltammetry software available, significant issues exist with source code inaccessible forupdating or customization, nonconfigurable data processing procedures, and hardwareincompatibilities. These limitations, coupled with the recent proliferation of waveform typesand increased demands for high bandwidth data acquisition and efficient data processing,create the need for sophisticated, powerful, and flexible voltammetry software. We reportdeveloping ¿SeroWare¿, an open-source, end-to-end voltammetry acquisition and analysissoftware package designed to handle a wide variety of use cases encountered byvoltammetry users. Although inspired by neurochemical analyses, this software is flexible,customizable, and compatible with open-source toolkits. The modular software architectureenables users to generate, acquire, and analyze voltammetry data of different types, rangingfrom pulse and sweep waveforms to fast and slow scans via easily accessible and exportable file formats. Template code is providedfor communicating with a variety of standard external devices. We report several novel features for waveform applications and dataflow. In-depth documentation in a User Guide and video tutorials are provided to enable new research directions, particularlyregarding shareability and lowering the barriers to entry for new investigators, C.S.M. was supported by the National Science Foundation Graduate Research Fellowship Program (DGE-1650604 and DGE-2034835). The authors would also like to acknowledge the support of the National Institute on Drug Abuse (DA045550), the National Science Foundation (CHE 2404470), and the Spanish Ministry of Science, Innovation, and Universities (PID2021-126304OB-C44). Any opinions, findings, conclusions, or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation or the National Institutes of Health.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis de maestría (MasterThesis)

Módulo G-ADA: Sistema de instrumentación basado en FPGA para la generación y muestreo de señales analógicas a altas frecuencias en sensores capacitivos, G-ADA Module: An FPGA-based instrumentation equipment for the generation and sampling of analog signals at high frequency rates in capacitive sensors, Mòdul G-ADA: Sistema de instrumentació basat en FPGA per a la generació y mostreig de senyals analògics a altes freqüències en sensors capacitius

  • Cantero-García, Marcos
[ES] Un parámetro crucial a la hora de tomar muestras es la frecuencia de muestreo del equipo, ya que define la resolución temporal y determina la información que puede ser extraída de un sistema. Trabajar con una frecuencia de muestreo limitada puede llevar a pérdida de transitorios valiosos o eventos que ocurren más allá de la resolución temporal del equipo de medida empleado si no se cumple con el teorema de Nyquist-Shannon. Además, la frecuencia de muestreo también limita la frecuencia máxima a la cual un sistema puede ser estimulado para medir su respuesta, debido al teorema anteriormente mencionado. Esto, junto a otros factores, puede ser una limitación en algunas aplicaciones que se benefician de trabajar con señales de alta frecuencia, como puede ser espectroscopía o algún dispositivo de medida cuya sensibilidad mejora a altas frecuencias. En otras aplicaciones, tener una frecuencia de muestreo más alta que la impuesta por el teorema de Nyquist-Shannon puede ser útil. Este es el caso, por ejemplo, de sistemas que requieren respuestas en tiempo real, como la aplicación de algún tipo de compensación con el objetivo de estabilizar una medida o eliminar ruido. Por tanto, el objetivo de este trabajo fin de master es desarrollar un sistema de medida, llamado Módulo G-ADA , que sea capaz de generar y muestrear señales analógicas a altas frecuencias de muestreo. Esta aplicación es ideal para muchas áreas, pero en particular para sistemas electroquímicos, en los que se estimula el sistema con una señal eléctrica y se mide su respuesta. Por tanto, se trata de una herramienta con múltiples aplicaciones, diseñada para que sea fácilmente integrable en distintas placas de equipos de medida de laboratorio para servir a los objetivos de distintos grupos de investigación, a un precio reducido. En particular, será probada en un proyecto de investigación basado en sensores capacitivos. En dicho proyecto, una estructura de puente de Wheatstone formada por cuatro electrodos interdigitados, con dos de ellos funcionalizados, es estimulada con una señal analógica, midiendo su respuesta. Con el objetivo de estabilizar el puente, se generará una segunda señal para eliminar el nivel basal de la medida en el puente. El módulo G-ADA se diseñará en torno a una FPGA, e incluirá un ADC y DAC de altas prestaciones. Este hardware permitirá la generación y el muestreo de las señales hasta las decenas de megahercios., Esta investigación ha sido financiada por el Ministerio de Ciencia e Innovación bajo la ayuda PID2021-126304OB-C44 y el Ministerio de Ciencia, Innovación y Universidades bajo la ayuda PID2024-155683OB-C44.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Machine-learning-guided design of electroanalytical pulse waveforms

  • Movassaghi, Cameron S.
  • Perrotta, Katie A.
  • Curry, Maya E.
  • Nashner, Audrey N.
  • Nguyen, Katherine K.
  • Wesely, Mila E.
  • Liu, Chong
  • Meyer, Aaron S.
  • Andrews, Anne M.
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
[EN] Voltammetry is widely used to detect and quantify oxidizable or reducible species in complex environments. The neurotransmitter serotonin epitomizes an analyte that is challenging to detect in situ due to its low concentrations and the co-existence of similarly structured analytes and interferents. We developed rapid-pulse voltammetry for brain neurotransmitter monitoring due to the high information content elicited from voltage pulses. Generally, the design of voltammetry waveforms remains challenging due to prohibitively large combinatorial search spaces and a lack of design principles. Here, we illustrate how Bayesian optimization can be used to hone searches for optimized rapid pulse waveforms. Our machine-learning-guided workflow (SeroOpt) outperformed random and human-guided waveform designs and is tunable a priori to enable selective analyte detection. We interpreted the black box optimizer and found that the logic of machine-learning-guided waveform design reflected domain knowledge. Our approach is straightforward and generalizable for all single and multi-analyte problems requiring optimized electrochemical waveform solutions. Overall, SeroOpt enables data-driven exploration of the waveform design space and a new paradigm in electroanalytical method development., This work was supported by the National Science Foundation (CHE-2404470). CSM was supported by the National Science Foundation Graduate Research Fellowship Program (DGE-1650604 and DGE-2034835). Any opinions, findings, conclusions, or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of the National Science Foundation. This research was also supported by the Spanish Ministry of Science, Innovation, and Universities under project number PID2021-126304OB-C44. The authors acknowledge Biorender.com (http://Biorender.com) for the Table of Contents graphic and Fig. 7. See: https://BioRender.com/fxn08n1 and https://BioRender.com/lre0n7d.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Inductor-Based Biosensors for Real-Time Monitoring in the Liquid Phase

  • Cantero-García, Marcos
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Pastor Navarro, Nuria
  • Noguera Murray, Patricia Silvestre|||0000-0001-7155-0710
  • Masot Peris, Rafael|||0000-0002-1114-649X
  • Hernández-Maciá, Miriam
  • Gimenez-Romero, David
[EN] Current liquid-phase resonant biosensors, such as Quartz Crystal Microbalance, Surface Acoustic Wave, or Surface Plasmon Resonance, typically rely on specialized piezoelectric substrates or complex optical setups. These requirements often necessitate cleanroom fabrication, thereby limiting cost-effective scalability. This study presents a high-integration sensing platform based on standard Printed Circuit Board (PCB) technology, incorporating an embedded inductor within a fluidic system for real-time monitoring. This design leverages industrial manufacturing standards to achieve a compact, low-cost, and scalable architecture. Detection is governed by shifts in the resonance frequency of an LC tank circuit; specifically, increases in bulk ionic strength induce a frequency decrease, whereas biomolecular adsorption at the sensor surface leads to a frequency increase. This phenomenon can be explained by the modulation of the inter-turn capacitance, which is modeled as a combination of capacitive elements accounting for contributions from the bulk electrolyte and the surface-bound dielectric layer. Such divergent responses provide an intrinsic self-discriminating capability, allowing for the analytical differentiation between surface interactions and bulk effects. To the best of our knowledge, this is the first demonstration of an inductor-based resonant sensor fully embedded in a PCB fluidic architecture for continuous liquid-phase analyte monitoring. Validated through a protein-antibody model (Bovine Serum Albumin-anti-Bovine Serum Albumin), the sensor demonstrated a limit of detection of 1.7 ppm (0.026 mM) and a linear dynamic range of 31-211 ppm (0.47-3.2 mM). These performance metrics, combined with a reproducibility of 4 +/- 3%, indicate that the platform meets the requirements for robust analytical applications. Its inherent simplicity and potential for miniaturization position this technology as a viable candidate for point-of-care diagnostics in diverse environments., This work was supported in part by the Spanish Ministry of Science and Innovation under grant PID2021-126304OB-C44 and the Spanish Ministry of Science, Innovation and Universities under grant PID2024-155683OB-C44.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Sistemas optoelectrónicos para terapias fototérmicas dirigidas al cáncer de piel y optogenética en la regeneración de tejido nervioso

  • Terrés-Haro, José Manuel|||0000-0001-5794-7332
[ES] Esta tesis doctoral se enfoca en la creación y validación de sistemas optoelectrónicos para aplicaciones biomédicas, en concreto para la terapia fototérmica contra el cáncer de piel y la optogenética para la regeneración de tejido nervioso. En su transcurso, se ha desarrollado un conjunto de herramientas y dispositivos que abarcan desde la experimentación sobre cultivos celulares hasta modelos computacionales que simulan el tratamiento. Para la terapia fototérmica, se ha diseñado y construido un equipo de experimentación in vitro validado sobre cultivos celulares. Este dispositivo, equipado con funcionalidades para controlar la potencia del láser, gestionar los tiempos de irradiación, realizar un posicionamiento automático de varias muestras bajo el haz, y monitorizar la evolución de la temperatura, se presenta como una herramienta altamente beneficiosa para la investigación en esta área. Después, se exploró la simulación mediante el Método de Elementos Finitos para analizar el comportamiento de las nanopartículas y sus suspensiones en agua, arrojando luz sobre sus potenciales aplicaciones en terapias fototérmicas y campos relacionados. Gracias al aprendizaje obtenido en los primeros pasos de este estudio, se logró el desarrollo de dos nuevos equipos que habilitan la realización de experimentos in vivo. Además, se ha implementado un modelo computacional diseñado para investigar el impacto de la terapia fototérmica en tejido biológico. Por último, se desarrolló un dispositivo optoelectrónico de reducidas dimensiones y alta potencia para la estimulación optogenética de neuronas modificadas genéticamente, con el objetivo de observar el transitorio de la estimulación y así entender en mayor medida las posibilidades que ofrece la optogenética en el campo de la regeneración de tejidos., [CA] Aquesta tesi doctoral es centra en la creació i validació de sistemes optoelectrònics per a aplicacions biomèdiques, específicament per a la teràpia fototèrmica contra el càncer de pell i l'optogenètica per a la regeneració del teixit nerviós. Durant el seu desenvolupament, s'han dut a terme un conjunt d'eines i dispositius, des de l'experimentació en cultius cel·lulars fins a models computacionals que simulen el tractament. Per a la teràpia fototèrmica, s'ha dissenyat i construït un dispositiu de experimentació in vitro validat en cultius cel·lulars. Aquest dispositiu, equipat amb funcionalitats per controlar la potència del làser, gestionar els temps d'irradiació, realitzar un posicionament automàtic de diverses mostres sota el feix i monitoritzar l'evolució de la temperatura, es presenta com una eina altament beneficiosa per a la recerca en aquest àmbit. A continuació, s'ha explorat la simulació mitjançant el Mètode d'Elements Finits per analitzar el comportament de les nanopartícules i les seves suspensions en aigua, aportant llum a les seves possibles aplicacions en teràpies fototèrmiques i camps relacionats. Gràcies al coneixement adquirit en les primeres etapes d'aquest estudi, s'ha aconseguit el desenvolupament de dos nous dispositius que possibiliten realitzar experiments in vivo. A més, s'ha implementat un model computacional dissenyat per investigar l'impacte de la teràpia fototèrmica en teixit biològic. Finalment, s'ha desenvolupat un dispositiu optoelectrònic de reduïdes dimensions i alta potència per a l'estimulació optogenètica de neurones modificades genèticament, amb l'objectiu d'observar la estimulació transitoria i comprendre millor les possibilitats que ofereix l'optogenètica en el camp de la regeneració de teixits., [EN] This doctoral thesis focuses on the creation and validation of optoelectronic systems for biomedical applications, specifically for photothermal therapy against skin cancer and optogenetics for nerve tissue regeneration. During its course, a set of tools and devices has been developed, ranging from experimentation on cell cultures to computational models simulating the treatment. For photothermal therapy, an in vitro device has been designed and constructed for experimentation in cell cultures. This device, equipped with functionalities to control laser power, manage irradiation times, perform automatic positioning of multiple samples under the beam, and monitor temperature evolution, emerges as a highly beneficial tool for research in this area. Next, simulation using the Finite Element Method was explored to analyze the behavior of nanoparticles and their suspensions in water, shedding light on their potential applications in photothermal therapies and related fields. Thanks to the knowledge gained in the early stages of this study, the development of two new devices enabling in vivo experiments was achieved. Furthermore, a computational model designed to investigate the impact of photothermal therapy on biological tissue has been implemented. Finally, a compact, high-power optoelectronic device was developed for the optogenetic stimulation of genetically modified neurons, with the aim of observing the stimulation transient and gaining a better understanding of the possibilities that optogenetics offers in the field of tissue regeneration., El material y las instalaciones utilizados en el desarrollo de este trabajo fueron financiados por las ayudas PID2021-126304OB-C44 y PID2021-124359OB-I00 de MCIN/AEI/10.13039/5011000110-33, el programa H2020 FetOpen con el proyecto número 964562, la ayuda de la Conselleria de Educación, Investigación, Cultura y Deporte de la Generalitat Valenciana CIPROM/2021/007 y el proyecto PROMETEO 2018/024, la Fundación Social Europea ACIF/2019/120, y el Ministerio de Ciencia, Innovación y Universidades con las becas doctorales FPU17/03239 y FPU17/03800. El trabajo ha recibido también financiación de la Agencia Estatal de Investigación con los proyectos números RTI2018-100910-B-C41, RTI2018-100910-B-C43-AR y PID2021-126304OB-C41, el Instituto de Salud Carlos III - CIBER-BBN: Safe N Medtech and Smart-4-Fabry Projects (asociado a los programas europeos del marco H2020 (H2020/2014-2020) con la ayuda número 814607) y el Ministerio de Ciencia e Innovación con las beca predoctorales FPU17/03800 y FPU17/03239
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optogenetic Stimulation Array for Confocal Microscopy Fast Transient Monitoring

  • Monreal-Trigo, Javier|||0000-0002-4067-1867
  • Terrés-Haro, José Manuel|||0000-0001-5794-7332
  • Giraldo, Esther|||0000-0001-5488-3011
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Martínez-Rojas, Beatriz
  • Sánchez-Martín, Maria del Mar
  • Moreno Manzano, Victoria
[EN] Optogenetics is an emerging discipline with multiple applications in neuroscience, allowing to study neuronal pathways or serving for therapeutic applications such as in the treatment of anxiety disorder, autism spectrum disorders (ASDs), or Parkinson's disease. More recently optogenetics is opening its way also to stem cell-based therapeutic applications for neuronal regeneration after stroke or spinal cord injury. The results of optogenetic stimulation are usually evaluated by immunofluorescence or flow cytometry, and the observation of transient responses after stimulation, as in cardiac electrophysiology studies, by optical microscopy. However, certain phenomena, such as the ultra-fast calcium waves acquisition upon simultaneous optogenetics, are beyond the scope of current instrumentation, since they require higher image resolution in real-time, employing for instance time-lapse confocal microscopy. Therefore, in this work, an optogenetic stimulation matrix controllable from a graphical user interface has been developed for its use with a standard 24-well plate for an inverted confocal microscope use and validated by using a photoactivable adenyl cyclase (bPAC) overexpressed in rat fetal cortical neurons and the consequent calcium waves propagation upon 100 ms pulsed blue light stimulation., This work was supported in part by MCIN/AEI//10.13039/5011000110-33 under Grants PID2021-126304OB-C44 and PID2021-124359OB-I00, in part by the ERDF A Way of Making Europe, and in part by under Fet Open Program under Project 964562 H2020. The work of Beatriz Martinez-Rojas was supported by the Conselleria de Educacion, Investigacion, Cultura y Deporte de la Generalitat Valenciana and the European Social Fundation under Grant ACIF/2019/120. The work of Javier Monreal-Trigo andJose Manuel Terres-Haro was supported by the Spanish Ministry of Science,Innovation, and Universities for their Doctoral under Grants FPU17/03239 and FPU17/03800.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Distributed Embedded System for Multiparametric Assessment of Infrastructure Durability Using Electrochemical Techniques

  • Monreal-Trigo, Javier|||0000-0002-4067-1867
  • Alcañiz Fillol, Miguel|||0000-0002-4579-9210
  • Gandía-Romero, Jose M.|||0000-0003-0257-3286
  • Ramón, José Enrique
  • Bataller, Román
  • Soto Camino, Juan
[ES] Presentamos un sistema autónomo que monitoriza de forma remota el estado de las estructuras de hormigón armado. Este sistema realiza un seguimiento en tiempo real de la tasa de corrosión de las barras de refuerzo (iCORR), junto con otros parámetros relevantes como la temperatura, el potencial de corrosión (ECORR) y la resistencia eléctrica del hormigón (RE), en varios puntos de control de la estructura utilizando sensores incrustados. El valor de iCORR se obtiene aplicando una nueva técnica de polarización electroquímica de bajo estrés a los sensores de corrosión. El sistema electrónico personalizado gestiona la red de sensores, que consiste en una placa de medición por cada punto de control conectada a un ordenador de placa única central encargado de procesar los datos de medición y subir los resultados a un servidor mediante una conexión 4G. En este trabajo, reportamos los resultados obtenidos tras la implementación del sistema de sensores en un muro de hormigón armado, donde se monitorearon dos áreas representativas bien diferenciadas. Los parámetros de corrosión obtenidos mostraron valores consistentes. Se obtuvieron conclusiones similares con los valores de ECORR registrados en las barras de refuerzo. Con el seguimiento de iCORR, se construyó un diagrama de penetración del daño por corrosión. Este diagrama es particularmente útil para identificar eventos críticos durante el periodo de propagación de la corrosión y para estimar la vida útil de las estructuras. Por lo tanto, el sistema se presenta como una herramienta útil para el mantenimiento estructural y las predicciones de vida útil de nuevas estructuras., [EN] We present an autonomous system that remotely monitors the state of reinforced concrete structures. This system performs real-time follow-up of the corrosion rate of rebars (iCORR), along with other relevant parameters such as temperature, corrosion potential (ECORR), and electrical resistance of concrete (RE), at many of a structure¿s control points by using embedded sensors. iCORR is obtained by applying a novel low-stress electrochemical polarization technique to corrosion sensors. The custom electronic system manages the sensor network, consisting of a measurement board per control point connected to a central single-board computer in charge of processing measurement data and uploading results to a server via 4G connection. In this work, we report the results obtained after implementing the sensor system into a reinforced concrete wall, where two well-differentiated representative areas were monitored. The obtained corrosion parameters showed consistent values. Similar conclusions are obtained with ECORR recorded in rebars. With the iCORR follow-up, the corrosion penetration damage diagram is built. This diagram is particularly useful for identifying critical events during the corrosion propagation period and to be able to estimate structures¿ service life. Hence, the system is presented as a useful tool for the structural maintenance and service life predictions of new structures., This research was supported by the Spanish Ministry of Science, Innovation and Universities via a doctoral grant to Jose Enrique Ramon Zamora (FPU13/00911) and to Javier Monreal Trigo (FPU17/03239). Funding was also provided by the Spanish Ministry of Science and Innovation under project numbers PID2021-126304OB-C44, PID2020-119744RB-C21 and PID2020-119744RB-C22, and by the Universitat Politecnica de Valencia under project number SP20180245 'Voltammetric Electronic Tongue for Durability Control in Concrete'.