Pasar al contenido principal

EXPLORACION SOBRE VIGAS SEGMENTADAS DE HORMIGON CON IMPRESION 3D PARA FOMENTAR LA SOSTENIBILIDAD EN LA CONSTRUCCION

PID2021-126397OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of high-strength SCC with and without steel fibres on the shear behaviour of dry joints in PCSBs

  • Traver-Abella, Celia
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Albiol Ibáñez, José Ramón|||0000-0003-3049-9693
[EN] The structural behaviour of precast concrete segmental bridges (PCSBs) heavily relies on the strength of the joints between segments. Multi-keyed dry joints are currently the most commonly used solution in these discontinuity zones. Employing high-strength concrete is becoming increasingly common in civil engineering given its higher strength and improved durability. It specifically allows higher prestressing levels in PCSBs. Using self-compacting concrete enhances workability and adding steel fibres improves mechanical properties. The existing scientific literature includes experimental tests to analyse the shear behaviour of castellated dry joints in different concrete types. However, no experimental tests appear specifically for the castellated dry joints made with high-strength self-compacting concrete (HS-SCC) with and without steel fibres. Therefore, this experimental study conducted 31 push-off-type tests to analyse the behaviour and shear capacity of dry joints made of HS-SCC by investigating the influence of adding steel fibres to the concrete mix. The study examined crack patterns, load-displacement behaviour, failure modes and different (cracking, ultimate and residual) loads. The addition of steel fibres improved joints¿ shear capacity. However, brittle behaviour was observed after reaching ultimate load when using HS-SCC, even when steel fibres were added to the concrete mix. Finally, the adequacy of existing formulations was analysed. Standard AASHTO proved to be on the unsafe side for the castellated dry joints specimens made of HS-SCC without steel fibres, and provided a good approximation for the specimens with steel fibres., The authors thank the financial support provided by Grants: PID2021-126397OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; RTI2018-099091-B-C21-AR by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and TED2021-129358B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR". The authors also thank the Spanish Ministry of Universities for Grant FPU18/03310, which supported Celia Traver Abella. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility of iron-based shape memory alloy strips for shear strengthening of damaged RC beams promoting the formation of plastic hinges

  • Traver-Abella, Celia
  • Ruiz Pinilla, Joaquín Guillermo
  • Monserrat-Lopez, Andrea
  • Montoya-Coronado, Luis A.
  • Ribas, Carlos
  • Cladera, Antoni
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Bonet Senach, José Luís|||0000-0002-6687-5307
[EN] This research focuses on the proof of concept of the feasibility of iron-based shape memory alloys strips (Fe-SMA) to strengthen damaged structures by promoting the yielding of longitudinal reinforcement. For this purpose, an experimental campaign on real-scale reinforced concrete beams previously damaged on shear and retested after being strengthened was carried out. The strengthening technique consists of external Fe-SMA strips wrapping the beams. The results show a very significant increase in both shear strength and ductility. In addition, shear predictions were calculated and compared by several design models. This study highlights the potentialities of Fe-SMA as a strengthening technique for damaged beams on shear., The authors would like to thank the financial support provided by Grants: PID2021-126397OB-I00, PID2021-123701OB-C22, BIA2015-64672-C4-4-R and BIA2015-3 64672-C4-3-R by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe."; RTI2018-099091-B-C21-AR and RTI2018-099091-B-C22 by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and BIA2015-64672-C4-4-R and BIA2015-64672-C4-3-R (AEI/FEDER, UE); and TED2021-129358B-I00 and TED2021-130272B-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR". The Regional Valencian Government also supported this research with Project AICO/2020/295. Andrea Monserrat is supported by the Ministry of Universities (Spain) with the Recovery, Transformation and Resilience Plan (RD 289/2021 and order UNI/551/2021) funded by NextGenerationEU. The authors thank the Spanish Ministry of Science and Innovation for Grant FPU18/03310 that supported Celia Traver Abella. This research work was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain), with concrete supplied by Caplansa. They also appreciate the contribution of the re-fer AG Strengthening Solution Company, which provided the memory steel (Fe-SMA strips).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Shear strength of self-compacting concrete dry joints subjected to combined axial, bending and shear forces in precast concrete segmental bridges

  • Traver-Abella, Celia
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Fernández Prada, Miguel Ángel|||0000-0001-5527-7793
[EN] Castellated dry joints between segmental elements represent zones of discontinuity that affect the behaviour of precast concrete segmental bridges (PCSBs). These joints must be capable of transmitting combined axial, bending and shear forces. Under service conditions, the joints in PCSBs are designed to be closed, but can be allowed to be open under failure conditions. Experimental and numerical dry joint studies have focused mainly on the behaviour of dry joints subjected to direct shear with different confinement levels. However, the number of studies and tests with castellated dry joints under axial, bending and shear forces is very limited. Although self-compacting concrete (SCC) use is becoming increasingly common in precast concrete, shear resistance behaviour significantly differs between elements made of conventional vibrated concrete (CC) and SCC. No experimental tests of castellated dry joints made of normal-strength self-compacting concrete (NS-SCC) have been found. This work presents an experimental programme of 24 tests to understand the shear transfer mechanism through NS-SCC single-keyed and multi-keyed dry joints subjected to combined axial, bending and shear forces. In this work, a new test for push-off dry joint specimens subjected to combined shear and axial forces with or without eccentricity was designed. Significant differences were observed between closed and open joints regarding cracking patterns, joint kinematics, resistance mechanisms and failure mode. The experimental test results were compared to the provisions from AASHTO and Fouré. The analysed expressions generally overestimated closed and open joints¿ shear capacity., The authors would like to thank the financial support provided by Grants: PID2021 126397OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; RTI2018 099091-B-C21-AR by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and TED2021 129358B-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGeneration EU/PRTR . The authors thank the Spanish Ministry of Universities for Grant FPU18/03310, which supported Celia Traver Abella. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of steel fibres on the shear behaviour of SCC dry joints in precast segmental bridges

  • Traver-Abella, Celia
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Albiol Ibáñez, José Ramón|||0000-0003-3049-9693
[EN] The purpose of connections in precast concrete segmental bridges (PCSBs) is to transmit significant compressive and shear forces, ensuring the stability and stiffness of the structure. Castellated dry joints are increasingly used for the connection of precast concrete elements in these regions of discontinuity. Due to the low tensile strength of concrete, the use of steel fibres to improve the shear strength of this joint type has become widespread. In addition, in recent decades self-compacting concrete (SCC) has become popular in the precast industry due to its workability and ease of placement. Although there are experimental campaigns that studied the influence of steel fibres on the shear capacity of castellated dry joints, experimental tests using normal strength self-compacting concrete (NS-SCC), with and without steel fibres, have not been found. Therefore, this research analyses the influence of adding steel fibres to NS-SCC to improve the mechanical behaviour and shear strength of castellated dry joints in PCSBs. An experimental campaign of 37 push-off-type tests was conducted to assess their effect on the cracking, failure mode, shear strength and residual strength of the joint. The study revealed improvements in post-peak behaviour and shear capacity, which became more significant for higher steel fibre contents. A comparison to other authors¿ experimental results was made and indicated lower shear strength when using SCC. Additionally, the AASHTO formulation overestimated the shear strength of the NS-SCC joints tested in this study, except for the specimens with 80 kg/m3 of steel fibres., The authors thank the financial support provided by Grants: PID2021-126397OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; RTI2018-099091-B-C21-AR by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and TED2021-129358B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR . The authors also thank the Spanish Ministry of Universities for Grant FPU18/03310, which supported Celia Traver Abella. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.