Pasar al contenido principal

EXPLORACION SOBRE VIGAS SEGMENTADAS DE HORMIGON CON IMPRESION 3D PARA FOMENTAR LA SOSTENIBILIDAD EN LA CONSTRUCCION

PID2021-126397OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Shear behaviour of castellated dry joints in precast segmental beams made of special concretes. Influence of compression forces, with and without eccentricity, Comportamiento resistente a cortante de juntas secas conjugadas entre vigas segmentadas prefabricadas con hormigones especiales. Influencia de los esfuerzos de compression, con o sin excentricidad

  • Traver Abella, Celia
[ES] La construcción de puentes mediante elementos segmentados prefabricados de hormigón se ha consolidado como una alternativa constructiva eficiente y versátil, debido principalmente a la notable reducción de los plazos de ejecución y a la menor incidencia de las condiciones ambientales durante el proceso constructivo. Las juntas entre segmentos generan regiones de discontinuidad que deben ser capaces de transmitir esfuerzos de compresión y cortante para asegurar la rigidez, la capacidad y la estabilidad de la estructura. En la actualidad, los puentes segmentados prefabricados de hormigón con pretensado exterior y juntas secas conjugadas constituyen la tipología más empleada. Las juntas secas conjugadas han sido objeto de numerosos ensayos experimentales. Sin embargo, la literatura científica se centra principalmente en el estudio de juntas sometidas a cortante directo y fabricadas con hormigón convencional. La industria de la prefabricación utiliza actualmente otros materiales, como el hormigón autocompactante, por la ventaja de su trabajabilidad; el hormigón de alta resistencia; y la incorporación de fibras de acero. Asimismo, las juntas entre segmentos están sometidas en servicio a esfuerzos combinados de axil, flexión y cortante, una situación que ha sido estudiada de forma muy limitada. Como consecuencia, las formulaciones de diseño existentes no contemplan adecuadamente ni el empleo de nuevos materiales ni la influencia de estados tensionales asociados a esfuerzos combinados. La presente tesis doctoral tiene como objetivo analizar el comportamiento y la resistencia de juntas secas conjugadas sometidas a esfuerzos combinados de axil, flexión y cortante, fabricadas con diferentes tipos de hormigón. Para ello, se ha diseñado un ensayo experimental capaz de reproducir estos estados de carga en especímenes tipo push-off, y se ha desarrollado un amplio programa experimental compuesto por especímenes push-off monolíticos, de junta plana y con llaves conjugadas de cortante. Los especímenes se fabricaron empleando hormigón autocompactante de resistencia convencional y de alta resistencia, con y sin incorporación de fibras de acero. En total, se ensayaron 98 especímenes, sometidos a cortante directo y a esfuerzos combinados. Para cada uno de los ensayos, se analizan el patrón de fisuración, el comportamiento carga-desplazamiento, el modo de fallo y las cargas de fisuración, última y residual. A partir de los resultados obtenidos, se evalúa la bondad de las formulaciones existentes y se analiza la influencia de los parámetros estudiados. Asimismo, se propone una nueva formulación empírica para estimar la resistencia a cortante de las juntas secas conjugadas bajo diferentes condiciones de carga y de materiales. Los resultados de esta investigación contribuyen a ampliar el conocimiento sobre el comportamiento de las juntas secas conjugadas en puentes segmentados prefabricados, aportando una extensa base de datos experimental y una evaluación crítica de los parámetros de diseño más relevantes. Además, establecen fundamentos sólidos para el desarrollo de futuras formulaciones de diseño que contemplan tanto el empleo de materiales avanzados como la acción de esfuerzos combinados., [EN] The construction of precast concrete segmental bridges (PCSBs) has become a versatile and efficient alternative, mainly due to significant reductions in construction time and the mitigation of environmental impacts during construction. Segmental joints constitute regions of structural discontinuity that must be capable of transmitting compressive and shear forces to ensure the stiffness, load-carrying capacity, and stability of the structure. Currently, externally prestressed PCSBs with castellated dry joints represent the most widely used bridge typology. Castellated dry joints have been studied in numerous experimental investigations. However, the existing scientific literature has primarily focused on joints subjected to direct shear and fabricated with conventional concrete. In contrast, the precast concrete industry increasingly employs alternative materials, such as self-compacting concrete due to its superior workability; high-strength concrete; and steel fibre-reinforced concrete. Furthermore, segmental joints are subjected in service to combined axial, bending, and shear forces, a loading condition that has received only limited attention in the literature. Consequently, existing design formulations do not adequately account for either the use of advanced concrete materials or the influence of stress states associated with combined loading conditions. The main objective of this doctoral thesis is to investigate the behaviour and shear capacity of castellated dry joints subjected to combined axial, bending, and shear forces and fabricated with different concrete materials. To this end, an experimental setup capable of reproducing these loading conditions in push-off specimens was designed, and an extensive experimental programme was carried out. The programme included monolithic, flat, and castellated dry joints in push-off specimens manufactured using self-compacting concrete of both normal and high strength, with and without steel fibres. A total of 98 specimens were tested under direct shear and combined loading conditions. For each test, the cracking pattern, load-displacement response, failure mode, and cracking, ultimate, and residual loads were analysed. Based on the experimental results, the validity of existing design formulations is assessed, and the influence of the investigated parameters is examined. In addition, a new empirical formulation is proposed to predict the shear capacity of castellated dry joints under various loading conditions and material configurations. The findings of this research contribute to expanding the current knowledge of the behaviour of castellated dry joints in PCSBs by providing an extensive experimental database and a comprehensive assessment of the most relevant design parameters. Furthermore, the results establish a solid foundation for the development of future design formulations that account for both advanced concrete materials and combined loading conditions., [CA] La construcció de ponts mitjançant elements segmentats prefabricats de formigó s'ha consolidat com una alternativa constructiva eficient i versàtil, degut principalment a la notable reducció dels terminis d'execució i a la menor incidència de les condicions ambientals durant el procés constructiu. Les juntes entre segments generen regions de discontinuïtat que han de ser capaces de transmetre esforços de compressió i tallant per a assegurar la rigidesa, la capacitat i l'estabilitat de l'estructura. En l'actualitat, els ponts segmentats prefabricats de formigó amb pretesat exterior i juntes seques conjugades constituïxen la tipologia més empleada. Les juntes seques conjugades han sigut objecte de nombrosos assajos experimentals. No obstant això, la literatura científica se centra principalment en l'estudi de juntes sotmeses a tallant directe i fabricades amb formigó convencional. La indústria de la prefabricació utilitza actualment altres materials, com el formigó autocompactant, per l'avantatge de la seua traballabilitat; el formigó d'alta resistència; i la incorporació de fibres d'acer. Així mateix, les juntes entre segments estan sotmeses en servici a esforços combinats d'axial, flexió i tallant, una situació que ha sigut estudiada de forma molt limitada. Com a conseqüència, les formulacions de disseny existents no contemplen adequadament ni l'ús de nous materials ni la influència d'estats tensionals associats a esforços combinats. La present tesi doctoral té com a objectiu analitzar el comportament i la resistència de juntes seques conjugades sotmeses a esforços combinats d'axial, flexió i tallant, fabricades amb diferents tipus de formigó. Per a això, s'ha dissenyat un assaig experimental capaç de reproduir estos estats de càrrega en espècimens tipus push-off, i s'ha desenrotllat un ampli programa experimental compost per espècimens push-off monolítics, de junta plana i amb claus conjugades de tallant. Els espècimens es van fabricar emprant formigó autocompactant de resistència convencional i d'alta resistència, amb i sense incorporació de fibres d'acer. En total, es van assajar 98 espècimens, sotmesos a tallant directe i a esforços combinats. Per a cada un dels assajos, s'analitzen el patró de fissuració, el comportament carrega-desplaçament, el mode de fallada i les càrregues de fissuració, última i residual. A partir dels resultats obtinguts, s'avalua la bondat de les formulacions existents i s'analitza la influència dels paràmetres estudiats. Així mateix, es proposa una nova formulació empírica per a estimar la resistència a tallant de les juntes seques conjugades sota diferents condicions de càrrega i de materials. Els resultats d'esta investigació contribuïxen a ampliar el coneixement sobre el comportament de les juntes seques conjugades en ponts segmentats prefabricats, aportant una extensa base de dades experimental i una avaluació crítica dels paràmetres de disseny més rellevants. A més, establixen fonaments sòlids per al desenrotllament de futures formulacions de disseny que contemplen tant l'ús de materials avançats com l'acció d'esforços combinats., This doctoral thesis would not have been possible without the financial support of the Ministerio de Ciencia e Innovación (MCIN) through Grants PID2021–126397OBI00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, RTI2018–099091-B-C21-AR funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, and TED2021–129358B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. I am also thankful for the support of the Spanish Ministry of Universities through Grant FPU18/03310. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politècnica de València (UPV, Spain). Funding for open access charge: CRUE–Universitat Politècnica de València.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of high-strength SCC with and without steel fibres on the shear behaviour of dry joints in PCSBs

  • Traver-Abella, Celia
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Albiol Ibáñez, José Ramón|||0000-0003-3049-9693
[EN] The structural behaviour of precast concrete segmental bridges (PCSBs) heavily relies on the strength of the joints between segments. Multi-keyed dry joints are currently the most commonly used solution in these discontinuity zones. Employing high-strength concrete is becoming increasingly common in civil engineering given its higher strength and improved durability. It specifically allows higher prestressing levels in PCSBs. Using self-compacting concrete enhances workability and adding steel fibres improves mechanical properties. The existing scientific literature includes experimental tests to analyse the shear behaviour of castellated dry joints in different concrete types. However, no experimental tests appear specifically for the castellated dry joints made with high-strength self-compacting concrete (HS-SCC) with and without steel fibres. Therefore, this experimental study conducted 31 push-off-type tests to analyse the behaviour and shear capacity of dry joints made of HS-SCC by investigating the influence of adding steel fibres to the concrete mix. The study examined crack patterns, load-displacement behaviour, failure modes and different (cracking, ultimate and residual) loads. The addition of steel fibres improved joints¿ shear capacity. However, brittle behaviour was observed after reaching ultimate load when using HS-SCC, even when steel fibres were added to the concrete mix. Finally, the adequacy of existing formulations was analysed. Standard AASHTO proved to be on the unsafe side for the castellated dry joints specimens made of HS-SCC without steel fibres, and provided a good approximation for the specimens with steel fibres., The authors thank the financial support provided by Grants: PID2021-126397OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe"; RTI2018-099091-B-C21-AR by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and TED2021-129358B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR". The authors also thank the Spanish Ministry of Universities for Grant FPU18/03310, which supported Celia Traver Abella. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility of iron-based shape memory alloy strips for shear strengthening of damaged RC beams promoting the formation of plastic hinges

  • Traver-Abella, Celia
  • Ruiz Pinilla, Joaquín Guillermo
  • Monserrat-Lopez, Andrea
  • Montoya-Coronado, Luis A.
  • Ribas, Carlos
  • Cladera, Antoni
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Bonet Senach, José Luís|||0000-0002-6687-5307
[EN] This research focuses on the proof of concept of the feasibility of iron-based shape memory alloys strips (Fe-SMA) to strengthen damaged structures by promoting the yielding of longitudinal reinforcement. For this purpose, an experimental campaign on real-scale reinforced concrete beams previously damaged on shear and retested after being strengthened was carried out. The strengthening technique consists of external Fe-SMA strips wrapping the beams. The results show a very significant increase in both shear strength and ductility. In addition, shear predictions were calculated and compared by several design models. This study highlights the potentialities of Fe-SMA as a strengthening technique for damaged beams on shear., The authors would like to thank the financial support provided by Grants: PID2021-126397OB-I00, PID2021-123701OB-C22, BIA2015-64672-C4-4-R and BIA2015-3 64672-C4-3-R by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe."; RTI2018-099091-B-C21-AR and RTI2018-099091-B-C22 by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and BIA2015-64672-C4-4-R and BIA2015-64672-C4-3-R (AEI/FEDER, UE); and TED2021-129358B-I00 and TED2021-130272B-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR". The Regional Valencian Government also supported this research with Project AICO/2020/295. Andrea Monserrat is supported by the Ministry of Universities (Spain) with the Recovery, Transformation and Resilience Plan (RD 289/2021 and order UNI/551/2021) funded by NextGenerationEU. The authors thank the Spanish Ministry of Science and Innovation for Grant FPU18/03310 that supported Celia Traver Abella. This research work was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain), with concrete supplied by Caplansa. They also appreciate the contribution of the re-fer AG Strengthening Solution Company, which provided the memory steel (Fe-SMA strips).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Shear strength of self-compacting concrete dry joints subjected to combined axial, bending and shear forces in precast concrete segmental bridges

  • Traver-Abella, Celia
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Fernández Prada, Miguel Ángel|||0000-0001-5527-7793
[EN] Castellated dry joints between segmental elements represent zones of discontinuity that affect the behaviour of precast concrete segmental bridges (PCSBs). These joints must be capable of transmitting combined axial, bending and shear forces. Under service conditions, the joints in PCSBs are designed to be closed, but can be allowed to be open under failure conditions. Experimental and numerical dry joint studies have focused mainly on the behaviour of dry joints subjected to direct shear with different confinement levels. However, the number of studies and tests with castellated dry joints under axial, bending and shear forces is very limited. Although self-compacting concrete (SCC) use is becoming increasingly common in precast concrete, shear resistance behaviour significantly differs between elements made of conventional vibrated concrete (CC) and SCC. No experimental tests of castellated dry joints made of normal-strength self-compacting concrete (NS-SCC) have been found. This work presents an experimental programme of 24 tests to understand the shear transfer mechanism through NS-SCC single-keyed and multi-keyed dry joints subjected to combined axial, bending and shear forces. In this work, a new test for push-off dry joint specimens subjected to combined shear and axial forces with or without eccentricity was designed. Significant differences were observed between closed and open joints regarding cracking patterns, joint kinematics, resistance mechanisms and failure mode. The experimental test results were compared to the provisions from AASHTO and Fouré. The analysed expressions generally overestimated closed and open joints¿ shear capacity., The authors would like to thank the financial support provided by Grants: PID2021 126397OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; RTI2018 099091-B-C21-AR by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and TED2021 129358B-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGeneration EU/PRTR . The authors thank the Spanish Ministry of Universities for Grant FPU18/03310, which supported Celia Traver Abella. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of steel fibres on the shear behaviour of SCC dry joints in precast segmental bridges

  • Traver-Abella, Celia
  • Bonet Senach, José Luís|||0000-0002-6687-5307
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Albiol Ibáñez, José Ramón|||0000-0003-3049-9693
[EN] The purpose of connections in precast concrete segmental bridges (PCSBs) is to transmit significant compressive and shear forces, ensuring the stability and stiffness of the structure. Castellated dry joints are increasingly used for the connection of precast concrete elements in these regions of discontinuity. Due to the low tensile strength of concrete, the use of steel fibres to improve the shear strength of this joint type has become widespread. In addition, in recent decades self-compacting concrete (SCC) has become popular in the precast industry due to its workability and ease of placement. Although there are experimental campaigns that studied the influence of steel fibres on the shear capacity of castellated dry joints, experimental tests using normal strength self-compacting concrete (NS-SCC), with and without steel fibres, have not been found. Therefore, this research analyses the influence of adding steel fibres to NS-SCC to improve the mechanical behaviour and shear strength of castellated dry joints in PCSBs. An experimental campaign of 37 push-off-type tests was conducted to assess their effect on the cracking, failure mode, shear strength and residual strength of the joint. The study revealed improvements in post-peak behaviour and shear capacity, which became more significant for higher steel fibre contents. A comparison to other authors¿ experimental results was made and indicated lower shear strength when using SCC. Additionally, the AASHTO formulation overestimated the shear strength of the NS-SCC joints tested in this study, except for the specimens with 80 kg/m3 of steel fibres., The authors thank the financial support provided by Grants: PID2021-126397OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe ; RTI2018-099091-B-C21-AR by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe and TED2021-129358B-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR . The authors also thank the Spanish Ministry of Universities for Grant FPU18/03310, which supported Celia Traver Abella. This research was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain). Funding for open access charge: CRUE-Universitat Politecnica de Valencia.