Pasar al contenido principal

CONTINUIDAD DE FORJADOS DE PLACA ALVEOLAR MEDIANTE ALEACIONES CON MEMORIA DE FORMA PARA MEJORAR LA SOSTENIBILIDAD Y SEGURIDAD DE LAS INFRAESTRUCTURAS PREFABRICADAS DE HORMIGON

RTI2018-099091-B-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LAS ISLAS BALEARES

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

RC columns strengthened by steel caging: Cyclic loading tests on beam-column joints with non-ductile details

  • Ruiz-Pinilla, Joaquin G.
  • Cladera, Antoni
  • Pallarés Rubio, Francisco Javier|||0000-0003-4298-2287
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Beam-column joints suffer intense damage from seismic events and are the cause of many buildings collapsing. These zones present complex behaviour under cyclic loads, including tensile-compression cycles, which make reinforcement adherence worse and cause severe cracking in concrete. Although columns can be strengthened by various methods (e.g. concrete jacketing, fibre-reinforced polymers and steel jacketing-caging), beam column joints require complex systems being applied, but are not always effective. In Europe, fitting steel caging around columns is one of the most frequently used techniques, although its effectiveness against seismic events requires further study. The aim of this work is to analyse the behaviour of beam-column joints strengthened by steel caging subjected to cyclic loading, for which an ambitious experimental campaign was carried out on seven fullscale steel-caged specimens with a variety of strengthening solutions at joints. The results provide insight into the complex behaviour of joints with columns strengthened in this way, used as the basis for practical recommendations for engineers and architects who have to routinely retrofit structures against seismic events., The authors wish to express their gratitude for the financial support provided by the Spanish Ministry of Science and Innovation and the Spanish Ministry of Economy and Competitiveness with Research Projects BIA 2008-06268 and RTI2018-099091-B-C22
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Joint strengthening by external bars on RC beam-column joints

  • Ruiz Pinilla, Joaquín G.
  • Cladera, Antoni
  • Pallarés Rubio, Francisco Javier|||0000-0003-4298-2287
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Column strengthening is a very common practice for improving the seismic performance of reinforced concrete frame structures or repairing damage after a seismic event. Several methods are employed for column strengthening, which can improve column strength by preventing its shear, bending or compression failure. However, not all methods allow column strengthening connections between adjacent floors, thus the beam-column joint strength could be limited by the column-joint interface capacity. This work aimed to analyse two joint strengthening designs, for which an experimental campaign of eight full-scale beam-column joints strengthened with steel caging, and subjected to cyclic and gravity loads, was carried out. As access to joint panels is very complex in existing structures, joint strengthening consists of external solutions: vertical or diagonal bars and capitals connecting columns. The results showed that these techniques significantly increased beam-column joint strength and highlighted that failure can be undesirably transferred to the joint. Vertical bars prevented the bending failure of the column-joint interface, but failure occurred at the joint in this study. Diagonal bars can also prevent joint failure., The authors wish to thank the financial support provided by the Spanish Ministry of Science and Innovation and the Spanish Ministry of Economy and Competitiveness with Research Projects BIA 2008-06268 and RTI2018-099091-B-C22.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Feasibility of iron-based shape memory alloy strips for shear strengthening of damaged RC beams promoting the formation of plastic hinges

  • Traver-Abella, Celia
  • Ruiz Pinilla, Joaquín Guillermo
  • Monserrat-Lopez, Andrea
  • Montoya-Coronado, Luis A.
  • Ribas, Carlos
  • Cladera, Antoni
  • Miguel Sosa, Pedro|||0000-0001-5395-8149
  • Bonet Senach, José Luís|||0000-0002-6687-5307
[EN] This research focuses on the proof of concept of the feasibility of iron-based shape memory alloys strips (Fe-SMA) to strengthen damaged structures by promoting the yielding of longitudinal reinforcement. For this purpose, an experimental campaign on real-scale reinforced concrete beams previously damaged on shear and retested after being strengthened was carried out. The strengthening technique consists of external Fe-SMA strips wrapping the beams. The results show a very significant increase in both shear strength and ductility. In addition, shear predictions were calculated and compared by several design models. This study highlights the potentialities of Fe-SMA as a strengthening technique for damaged beams on shear., The authors would like to thank the financial support provided by Grants: PID2021-126397OB-I00, PID2021-123701OB-C22, BIA2015-64672-C4-4-R and BIA2015-3 64672-C4-3-R by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe."; RTI2018-099091-B-C21-AR and RTI2018-099091-B-C22 by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" and BIA2015-64672-C4-4-R and BIA2015-64672-C4-3-R (AEI/FEDER, UE); and TED2021-129358B-I00 and TED2021-130272B-C22 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR". The Regional Valencian Government also supported this research with Project AICO/2020/295. Andrea Monserrat is supported by the Ministry of Universities (Spain) with the Recovery, Transformation and Resilience Plan (RD 289/2021 and order UNI/551/2021) funded by NextGenerationEU. The authors thank the Spanish Ministry of Science and Innovation for Grant FPU18/03310 that supported Celia Traver Abella. This research work was undertaken at the Concrete Science and Technology University Institute (ICITECH) of the Universitat Politecnica de Valencia (UPV; Spain), with concrete supplied by Caplansa. They also appreciate the contribution of the re-fer AG Strengthening Solution Company, which provided the memory steel (Fe-SMA strips).