Pasar al contenido principal

CONTRIBUCION A LA AVIACION SOSTENIBLE A TRAVES DE LA OPTIMIZACION NUMERICA DE CAMARAS CON COMBUSTION POBRE PARA AERO-MOTORES DE NUEVA GENERACION MAS SILENCIOSOS Y LIMPIOS

PRE2020-093592

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical analysis of laminar velocity-forced premixed slit flames using modal decomposition techniques

  • Rodríguez-Pastor, Marc|||0000-0002-1207-079X
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Broatch, A.|||0000-0001-9991-1039
  • Koumides, P.
  • Pérez-Sánchez, E. J.
  • Mira, D.
[EN] The relation between Proper Orthogonal Decomposition (POD), Dynamic Mode Decomposition (DMD) and Flame Transfer Functions (FTF) is explored to gain further insight into the dynamics of two-dimensional laminar slit flames externally forced by velocity perturbations. The application of POD to the heat release rate fields suggests that the resultant modes can be split into two groups: the ones that are related to the displacement of the reactive sheet in the normal direction with regards to the flame front, and the ones that contain the local flame front distortions. The latter modes show preferential frequencies associated to the phase values of , and of the FTFs, which can be related to the maximum gain value depending on the case. Furthermore, the results of the modal analysis seem to support that the flame tip dynamics can be conceptually modelled as a set of standing waves whose joint response can reconstruct a propagation in the normal flame front direction, generating also the temporal fluctuations of the spatially-integrated heat release in the domain. The DMD analysis shows the existence of an interaction between the flame and the flow, and illustrates the fundamental role played by the velocity perturbations at the base for the motion of the reactive sheet. Thus, the analysis shows how data-based decomposition methods can be used to identify complex physical phenomena contained in the FTF graphs with different levels of detail, and extend the modal analysis to the physical space., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the HyInHeat project grant agreement No. 101091456, AHEAD PID2020-118387RB-C33, ORION TED2021-131618B-C22 and H2AERO CPP2022-009921 projects from the Ministerio de Ciencia e Innovacion. MRP is supported by grant PRE2020-093592 funded by MCIN/AEI/10.13039/5011 00011033 and by "ESF Investing in your future". DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC 2021) : RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical analysis of combustion noise in an atmospheric swirl-stabilized LDI burner through modal decomposition techniques

  • Broatch, A.|||0000-0001-9991-1039
  • Carreres, Marcos|||0000-0001-6430-6613
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Rodríguez-Pastor, Marc|||0000-0002-1207-079X
[EN] Combustion noise in gas turbine engines has recently become a relevant source of noise in the aircraft due to the appearance of new burner architectures that are intrinsically more unstable, and the optimization of other conventional noise sources in this mean of transport (e.g., jet, fan, airframe). In this work, a simulation setup for reactive conditions was prepared in the CONVERGE finite-volume package using the detailed chemistry SAGE solver to model the combustion of a benchmark case, which was solved using a LES approach with three different cell base sizes: 8,10,12 mm. A confined liquid-fueled swirl-stabilized burner located at the CORIA Laboratory, France, was used to validate the numerical results with the experimental measurements obtained at this facility. OH-PLIF measurements and PDA results for both phases were used to guarantee the accuracy of the numerical OH contours and the velocity profiles of both phases. These experimental measurements were collected at CORIA. After ensuring the stabilization of the numerical flame, the reactive simulations were extended with some adjustments in the time step to capture the acoustic motion. Several techniques like Fast Fourier Transform (FFT), Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD) were used to analyze these results and confirm the presence of a Precessing Vortex Core (PVC) and a Vortex Breakdown Bubble (VBB) during the coupling of pressure, axial velocity and fuel mass fraction in reactive conditions. Furthermore, the acoustic analysis performed with a Helmholtz solver proved that the second longitudinal mode of the chamber (329 Hz) was present in the pressure signal (300 Hz in the LES calculations) and resonated with the Vortex Breakdown Bubble (VBB). However, this dominant frequency did not appear in the frequency distribution of the OH mass fraction and no feedback interaction between the acoustic and the combustion happened. Thus, only combustion noise was obtained., This work was supported by the institutional program of the Korea Institute of Science and Technology (KIST, Project No. 2E32582).
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical analysis of laminar velocity-forced premixed slit flames using modal decomposition techniques

  • Rodriguez Pastor, Marc
  • Koumides, Phivos
  • Pérez Sánchez, Eduardo J.
  • García Tíscar, Jorge
  • Broatch Jacobi, Jaime Alberto
  • Mira Martínez, Daniel
The relation between Proper Orthogonal Decomposition (POD), Dynamic Mode Decomposition (DMD) and Flame Transfer Functions (FTF) is explored to gain further insight into the dynamics of two-dimensional laminar slit flames externally forced by velocity perturbations. The application of POD to the heat release rate fields suggests that the resultant modes can be split into two groups: the ones that are related to the displacement of the reactive sheet in the normal direction with regards to the flame front, and the ones that contain the local flame front distortions. The latter modes show preferential frequencies associated to the phase values of π, 2π and 3π of the FTFs, which can be related to the maximum gain value depending on the case. Furthermore, the results of the modal analysis seem to support that the flame tip dynamics can be conceptually modelled as a set of standing waves whose joint response can reconstruct a propagation in the normal flame front direction, generating also the temporal fluctuations of the spatially-integrated heat release in the domain. The DMD analysis shows the existence of an interaction between the flame and the flow, and illustrates the fundamental role played by the velocity perturbations at the base for the motion of the reactive sheet. Thus, the analysis shows how data-based decomposition methods can be used to identify complex physical phenomena contained in the FTF graphs with different levels of detail, and extend the modal analysis to the physical space., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the HyInHeat project grant agreement No. 101091456, AHEAD PID2020-118387RBC33, ORION TED2021-131618B-C22 and H2AERO CPP2022-009921 projects from the Ministerio de Ciencia e Innovación. MRP is supported by grant PRE2020-093592 funded by MCIN/ AEI/ 10.13039/5011 00011033 and by ‘‘ESF Investing in your future’’. DM acknowledges the grant Ayudas para contratos Ramón y Cajal (RYC 2021): RYC2021- 034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed, Postprint (author's final draft)