Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Kalbhor, A.
  • Mira Martínez, Daniel
  • Van-Oijen, Jeroen
[EN] This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovacion, Spain. We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNos-trum, and the technical support provided by Instituto de Astrofisica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016) . I. Olmeda acknowledges the Ayuda de Formacion de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formacion del Ministerio de Ciencia, Innovacion y Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical analysis of laminar velocity-forced premixed slit flames using modal decomposition techniques

  • Rodríguez-Pastor, Marc|||0000-0002-1207-079X
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Broatch, A.|||0000-0001-9991-1039
  • Koumides, P.
  • Pérez-Sánchez, E. J.
  • Mira, D.
[EN] The relation between Proper Orthogonal Decomposition (POD), Dynamic Mode Decomposition (DMD) and Flame Transfer Functions (FTF) is explored to gain further insight into the dynamics of two-dimensional laminar slit flames externally forced by velocity perturbations. The application of POD to the heat release rate fields suggests that the resultant modes can be split into two groups: the ones that are related to the displacement of the reactive sheet in the normal direction with regards to the flame front, and the ones that contain the local flame front distortions. The latter modes show preferential frequencies associated to the phase values of , and of the FTFs, which can be related to the maximum gain value depending on the case. Furthermore, the results of the modal analysis seem to support that the flame tip dynamics can be conceptually modelled as a set of standing waves whose joint response can reconstruct a propagation in the normal flame front direction, generating also the temporal fluctuations of the spatially-integrated heat release in the domain. The DMD analysis shows the existence of an interaction between the flame and the flow, and illustrates the fundamental role played by the velocity perturbations at the base for the motion of the reactive sheet. Thus, the analysis shows how data-based decomposition methods can be used to identify complex physical phenomena contained in the FTF graphs with different levels of detail, and extend the modal analysis to the physical space., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the HyInHeat project grant agreement No. 101091456, AHEAD PID2020-118387RB-C33, ORION TED2021-131618B-C22 and H2AERO CPP2022-009921 projects from the Ministerio de Ciencia e Innovacion. MRP is supported by grant PRE2020-093592 funded by MCIN/AEI/10.13039/5011 00011033 and by "ESF Investing in your future". DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC 2021) : RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated chemistry

  • García Oliver, José María
  • Pastor, José Manuel
  • Olmeda, I.
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020- 118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovación, Spain . We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNostrum, and the technical support provided by Instituto de Astrofísica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016). I. Olmeda acknowledges the Ayuda de Formación de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formación del Ministerio de Ciencia, Innovación Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramón Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed, Postprint (published version)