Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of soot formation in a lab-scale Rich-Quench-Lean combustor using LES with tabulated chemistry

  • Pachano-Prieto, Leonardo Manuel
  • Kalbhor, Abhijit
  • Mira, Daniel
  • Van-Oijen, Jeroen
[EN] A numerical study of the effects of air dilution on soot formation and particle dynamics in a lab-scale rich-quench-lean (RQL) combustor is presented using large-eddy simulations (LES) with tabulated chemistry. The modeling approach comprises a flamelet generated manifold (FGM) turbulent combustion model and an efficient discrete sectional method with clustering of sections (CDSM) to model soot formation. Three operating conditions are studied including a reference case without secondary air dilution and two cases with varying air dilution levels. For the latter, the split between primary and dilution air is varied from 80:20 to 60:40 expressed in percentage values. The study aims to investigate the effect of air dilution on the formation and oxidation of soot for various air splits using a direct comparison with the available experimental data. The results show a good correlation between predicted flame topology and spatial distribution of the soot volume fraction with the experimental observations. The introduction of air dilution is found to limit the production of soot with a more drastic reduction for the 40% dilution case compared to the 20% condition. Predicted particle size distributions (PSD) from the case without secondary air dilution correlate well with scanning mobility particle sizer (SMPS) measurements although fewer and smaller particles are predicted with air dilution. Leaner mixtures and enhanced oxidation, resulting from the interaction with air dilution jets, favor the decrease in soot formation., This project received funding from the Center of Excellence in Combustion project (grant agreement No 952181), the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C2 projects (Ministerio de Ciencia e Innovacion). LP acknowledges the Margarita Salas grant (Ministerio de Universidades, EU-Next Generation EU) and DM acknowledges the grant Ramon y Cajal RYC2021-034654-I. The authors acknowledge computer resources from Red Espanola de Supercomputacion, Spain (IM-2023-2-0011 and IM-2023-3-0013) .
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated chemistry

  • García Oliver, José María
  • Pastor, José Manuel
  • Olmeda, I.
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020- 118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovación, Spain . We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNostrum, and the technical support provided by Instituto de Astrofísica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016). I. Olmeda acknowledges the Ayuda de Formación de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formación del Ministerio de Ciencia, Innovación Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramón Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed, Postprint (published version)