Pasar al contenido principal

Modelling and simulation of power and propulsion systems

RYC2021-034654-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario BARCELONA SUPERCOMPUTING CENTER CENTRO NACIONAL DE SUPERCOMPUTACION

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Kalbhor, A.
  • Mira Martínez, Daniel
  • Van-Oijen, Jeroen
[EN] This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovacion, Spain. We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNos-trum, and the technical support provided by Instituto de Astrofisica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016) . I. Olmeda acknowledges the Ayuda de Formacion de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formacion del Ministerio de Ciencia, Innovacion y Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the Partially Stirred Reactor Model for LES in a Swirl-Stabilized Turbulent Premixed Flame

  • Rodrigues-Da Silva, Fredherico Nicolaus
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Mira, Daniel
[EN] This study presents an assessment of the Partially Stirred Reactor (PaSR) as a subgrid model for large eddy simulations (LES) of turbulent premixed combustion. The PaSR-LES approach uses a skeletal mechanism for methane/air combustion, and requires the transport of all the species, with a closure for the filtered source terms. The rate of progress for each reaction is given by the mixing and chemical time scales, which are computed from global flame parameters and a turbulent time scale respectively. This model is applied to a swirled combustor exhibiting a V-flame shape attached to the nozzle, subjected to heat loss. LES are carried out for two distinct equivalence ratios at atmospheric pressure. The flow fields and the thermochemical states from PaSR-LES are compared with the experimental data and solutions based on Flamelet Generated Manifolds (FGM). The results show good correlation with the experiments and FGM-LES, though also some sensitivity to the resolution. The approach also reproduces well the effect of heat loss, which is determined by the use of a chemical time scale given by a progress variable. Dedicated analysis of the swirl-stabilized flame on different regions is conducted evaluating the capabilities of the model to reproduce the burning velocity, flame shape and flame structure., This project has received funding from the Center of Excellence in Combustion project (grantagreement No 952181), along with the AHEAD PID2020-118387RB-C31 (CMT) / PID2020-118387RB-C33(BSC) and ORION PDC2021-121066-C22 (CMT) / PDC2021-121066-C21 (BSC), and H2AERO CPP2022-009921 (BSC) projects from the Ministerio de Ciencia e Innovacion. DM acknowledges the grant Ayudas paracontratos Ramon y Cajal (RYC 2021): RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical analysis of laminar velocity-forced premixed slit flames using modal decomposition techniques

  • Rodríguez-Pastor, Marc|||0000-0002-1207-079X
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Broatch, A.|||0000-0001-9991-1039
  • Koumides, P.
  • Pérez-Sánchez, E. J.
  • Mira, D.
[EN] The relation between Proper Orthogonal Decomposition (POD), Dynamic Mode Decomposition (DMD) and Flame Transfer Functions (FTF) is explored to gain further insight into the dynamics of two-dimensional laminar slit flames externally forced by velocity perturbations. The application of POD to the heat release rate fields suggests that the resultant modes can be split into two groups: the ones that are related to the displacement of the reactive sheet in the normal direction with regards to the flame front, and the ones that contain the local flame front distortions. The latter modes show preferential frequencies associated to the phase values of , and of the FTFs, which can be related to the maximum gain value depending on the case. Furthermore, the results of the modal analysis seem to support that the flame tip dynamics can be conceptually modelled as a set of standing waves whose joint response can reconstruct a propagation in the normal flame front direction, generating also the temporal fluctuations of the spatially-integrated heat release in the domain. The DMD analysis shows the existence of an interaction between the flame and the flow, and illustrates the fundamental role played by the velocity perturbations at the base for the motion of the reactive sheet. Thus, the analysis shows how data-based decomposition methods can be used to identify complex physical phenomena contained in the FTF graphs with different levels of detail, and extend the modal analysis to the physical space., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the HyInHeat project grant agreement No. 101091456, AHEAD PID2020-118387RB-C33, ORION TED2021-131618B-C22 and H2AERO CPP2022-009921 projects from the Ministerio de Ciencia e Innovacion. MRP is supported by grant PRE2020-093592 funded by MCIN/AEI/10.13039/5011 00011033 and by "ESF Investing in your future". DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC 2021) : RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of soot formation in a lab-scale Rich-Quench-Lean combustor using LES with tabulated chemistry

  • Pachano-Prieto, Leonardo Manuel
  • Kalbhor, Abhijit
  • Mira, Daniel
  • Van-Oijen, Jeroen
[EN] A numerical study of the effects of air dilution on soot formation and particle dynamics in a lab-scale rich-quench-lean (RQL) combustor is presented using large-eddy simulations (LES) with tabulated chemistry. The modeling approach comprises a flamelet generated manifold (FGM) turbulent combustion model and an efficient discrete sectional method with clustering of sections (CDSM) to model soot formation. Three operating conditions are studied including a reference case without secondary air dilution and two cases with varying air dilution levels. For the latter, the split between primary and dilution air is varied from 80:20 to 60:40 expressed in percentage values. The study aims to investigate the effect of air dilution on the formation and oxidation of soot for various air splits using a direct comparison with the available experimental data. The results show a good correlation between predicted flame topology and spatial distribution of the soot volume fraction with the experimental observations. The introduction of air dilution is found to limit the production of soot with a more drastic reduction for the 40% dilution case compared to the 20% condition. Predicted particle size distributions (PSD) from the case without secondary air dilution correlate well with scanning mobility particle sizer (SMPS) measurements although fewer and smaller particles are predicted with air dilution. Leaner mixtures and enhanced oxidation, resulting from the interaction with air dilution jets, favor the decrease in soot formation., This project received funding from the Center of Excellence in Combustion project (grant agreement No 952181), the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C2 projects (Ministerio de Ciencia e Innovacion). LP acknowledges the Margarita Salas grant (Ministerio de Universidades, EU-Next Generation EU) and DM acknowledges the grant Ramon y Cajal RYC2021-034654-I. The authors acknowledge computer resources from Red Espanola de Supercomputacion, Spain (IM-2023-2-0011 and IM-2023-3-0013) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Identification of Coherent Structures in Hydrogen-Enriched Swirl-Stabilised Flames Using Large-Eddy Simulations with Modal Decomposition Techniques

  • Rodrigues, Fredherico
  • Pachano, Leonardo
  • Mira, Daniel
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • García-Oliver, José M|||0000-0002-2676-9681
[EN] Large eddy simulations (LES) of an atmospheric swirled burner using a Partially Stirred Reactor (PaSR) closure are performed to investigate the hydrodynamic modes governing flow¿flame interactions under hydrogen enrichment. Three technically premixed methane¿air flames with increasing level of hydrogen are considered, Flame 1 (0% \text{H}_2), Flame 2 (40% \text{H}_2), and Flame 3 (50% \text{H}_2). Simulations show good agreement with experimental data, particularly in terms of velocity fields and overall flame behaviour. Distinct flame topologies are observed, with Flame 1 exhibiting a lifted M-shaped structure and Flames 2 and 3 forming attached V-shaped flames. Proper Orthogonal Decomposition is applied to identify the dominant coherent structures. Flame 1 is strongly governed by a precessing vortex core (PVC), while Flames 2 and 3 exhibit weaker, more distributed structures. A secondary structure in Flame 1 is identified as a harmonic of the primary PVC, whereas analysis of the respective vortices in hydrogen-enriched Flames 2 and 3 suggests an independent nature. Overall, hydrogen enrichment modifies the strength and coherence of hydrodynamic structures and promotes a partial decoupling between mixing and flow dynamics., This work has received funding from the Ministerio de Ciencia e Innovacion through the H2AERO project grant CPP2022-009921 and the Ayudas para contratos Ramon y Cajal grant RYC2021-034654 for D. Mira. Funding is also acknowledged from Generalitat Valenciana through DIALOGUE project (CIPROM/2022/24). L. Pachano acknowledges the AI4S fellowship within the Generación D initiative, Red.es, Ministerio para la Transformación Digital y de la Función Pública, for talent attraction (C005/24-ED CV1) by the European Union NextGenerationEU funds, through PRTR.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of soot formation in a lab-scale Rich-Quench-Lean combustor using LES with tabulated chemistry

  • Pachano, Leonardo
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
A numerical study of the effects of air dilution on soot formation and particle dynamics in a lab-scale rich-quench-lean (RQL) combustor is presented using large-eddy simulations (LES) with tabulated chemistry. The modeling approach comprises a flamelet generated manifold (FGM) turbulent combustion model and an efficient discrete sectional method with clustering of sections (CDSM) to model soot formation. Three operating conditions are studied including a reference case without secondary air dilution and two cases with varying air dilution levels. For the latter, the split between primary and dilution air is varied from 80:20 to 60:40 expressed in percentage values. The study aims to investigate the effect of air dilution on the formation and oxidation of soot for various air splits using a direct comparison with the available experimental data. The results show a good correlation between predicted flame topology and spatial distribution of the soot volume fraction with the experimental observations. The introduction of air dilution is found to limit the production of soot with a more drastic reduction for the 40% dilution case compared to the 20% condition. Predicted particle size distributions (PSD) from the case without secondary air dilution correlate well with scanning mobility particle sizer (SMPS) measurements although fewer and smaller particles are predicted with air dilution. Leaner mixtures and enhanced oxidation, resulting from the interaction with air dilution jets, favor the decrease in soot formation., This project received funding from the Center of Excellence in Combustion project (grant agreement No 952181), the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C2 projects (Ministerio de Ciencia e Innovación). LP acknowledges the Margarita Salas grant (Ministerio de Universidades, EU-Next Generation EU) and DM acknowledges the grant Ramón y Cajal RYC2021-034654-I. The authors acknowledge computer resources from Red Española de Supercomputación, Spain (IM-2023-2-0011 and IM-2023-3-0013), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated chemistry

  • García Oliver, José María
  • Pastor, José Manuel
  • Olmeda, I.
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020- 118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovación, Spain . We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNostrum, and the technical support provided by Instituto de Astrofísica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016). I. Olmeda acknowledges the Ayuda de Formación de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formación del Ministerio de Ciencia, Innovación Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramón Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical analysis of laminar velocity-forced premixed slit flames using modal decomposition techniques

  • Rodriguez Pastor, Marc
  • Koumides, Phivos
  • Pérez Sánchez, Eduardo J.
  • García Tíscar, Jorge
  • Broatch Jacobi, Jaime Alberto
  • Mira Martínez, Daniel
The relation between Proper Orthogonal Decomposition (POD), Dynamic Mode Decomposition (DMD) and Flame Transfer Functions (FTF) is explored to gain further insight into the dynamics of two-dimensional laminar slit flames externally forced by velocity perturbations. The application of POD to the heat release rate fields suggests that the resultant modes can be split into two groups: the ones that are related to the displacement of the reactive sheet in the normal direction with regards to the flame front, and the ones that contain the local flame front distortions. The latter modes show preferential frequencies associated to the phase values of π, 2π and 3π of the FTFs, which can be related to the maximum gain value depending on the case. Furthermore, the results of the modal analysis seem to support that the flame tip dynamics can be conceptually modelled as a set of standing waves whose joint response can reconstruct a propagation in the normal flame front direction, generating also the temporal fluctuations of the spatially-integrated heat release in the domain. The DMD analysis shows the existence of an interaction between the flame and the flow, and illustrates the fundamental role played by the velocity perturbations at the base for the motion of the reactive sheet. Thus, the analysis shows how data-based decomposition methods can be used to identify complex physical phenomena contained in the FTF graphs with different levels of detail, and extend the modal analysis to the physical space., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the HyInHeat project grant agreement No. 101091456, AHEAD PID2020-118387RBC33, ORION TED2021-131618B-C22 and H2AERO CPP2022-009921 projects from the Ministerio de Ciencia e Innovación. MRP is supported by grant PRE2020-093592 funded by MCIN/ AEI/ 10.13039/5011 00011033 and by ‘‘ESF Investing in your future’’. DM acknowledges the grant Ayudas para contratos Ramón y Cajal (RYC 2021): RYC2021- 034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed, Postprint (author's final draft)