Pasar al contenido principal

CALCULO DE NUEVOS DESARROLLOS NUMERICOS PARA AHEAD

PID2020-118387RB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario BARCELONA SUPERCOMPUTING CENTER CENTRO NACIONAL DE SUPERCOMPUTACION

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Assessment of the Partially Stirred Reactor Model for LES in a Swirl-Stabilized Turbulent Premixed Flame

  • Rodrigues-Da Silva, Fredherico Nicolaus
  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Mira, Daniel
[EN] This study presents an assessment of the Partially Stirred Reactor (PaSR) as a subgrid model for large eddy simulations (LES) of turbulent premixed combustion. The PaSR-LES approach uses a skeletal mechanism for methane/air combustion, and requires the transport of all the species, with a closure for the filtered source terms. The rate of progress for each reaction is given by the mixing and chemical time scales, which are computed from global flame parameters and a turbulent time scale respectively. This model is applied to a swirled combustor exhibiting a V-flame shape attached to the nozzle, subjected to heat loss. LES are carried out for two distinct equivalence ratios at atmospheric pressure. The flow fields and the thermochemical states from PaSR-LES are compared with the experimental data and solutions based on Flamelet Generated Manifolds (FGM). The results show good correlation with the experiments and FGM-LES, though also some sensitivity to the resolution. The approach also reproduces well the effect of heat loss, which is determined by the use of a chemical time scale given by a progress variable. Dedicated analysis of the swirl-stabilized flame on different regions is conducted evaluating the capabilities of the model to reproduce the burning velocity, flame shape and flame structure., This project has received funding from the Center of Excellence in Combustion project (grantagreement No 952181), along with the AHEAD PID2020-118387RB-C31 (CMT) / PID2020-118387RB-C33(BSC) and ORION PDC2021-121066-C22 (CMT) / PDC2021-121066-C21 (BSC), and H2AERO CPP2022-009921 (BSC) projects from the Ministerio de Ciencia e Innovacion. DM acknowledges the grant Ayudas paracontratos Ramon y Cajal (RYC 2021): RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical analysis of laminar velocity-forced premixed slit flames using modal decomposition techniques

  • Rodríguez-Pastor, Marc|||0000-0002-1207-079X
  • García-Tíscar, Jorge|||0000-0003-4934-4587
  • Broatch, A.|||0000-0001-9991-1039
  • Koumides, P.
  • Pérez-Sánchez, E. J.
  • Mira, D.
[EN] The relation between Proper Orthogonal Decomposition (POD), Dynamic Mode Decomposition (DMD) and Flame Transfer Functions (FTF) is explored to gain further insight into the dynamics of two-dimensional laminar slit flames externally forced by velocity perturbations. The application of POD to the heat release rate fields suggests that the resultant modes can be split into two groups: the ones that are related to the displacement of the reactive sheet in the normal direction with regards to the flame front, and the ones that contain the local flame front distortions. The latter modes show preferential frequencies associated to the phase values of , and of the FTFs, which can be related to the maximum gain value depending on the case. Furthermore, the results of the modal analysis seem to support that the flame tip dynamics can be conceptually modelled as a set of standing waves whose joint response can reconstruct a propagation in the normal flame front direction, generating also the temporal fluctuations of the spatially-integrated heat release in the domain. The DMD analysis shows the existence of an interaction between the flame and the flow, and illustrates the fundamental role played by the velocity perturbations at the base for the motion of the reactive sheet. Thus, the analysis shows how data-based decomposition methods can be used to identify complex physical phenomena contained in the FTF graphs with different levels of detail, and extend the modal analysis to the physical space., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the HyInHeat project grant agreement No. 101091456, AHEAD PID2020-118387RB-C33, ORION TED2021-131618B-C22 and H2AERO CPP2022-009921 projects from the Ministerio de Ciencia e Innovacion. MRP is supported by grant PRE2020-093592 funded by MCIN/AEI/10.13039/5011 00011033 and by "ESF Investing in your future". DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC 2021) : RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of soot formation in a lab-scale Rich-Quench-Lean combustor using LES with tabulated chemistry

  • Pachano-Prieto, Leonardo Manuel
  • Kalbhor, Abhijit
  • Mira, Daniel
  • Van-Oijen, Jeroen
[EN] A numerical study of the effects of air dilution on soot formation and particle dynamics in a lab-scale rich-quench-lean (RQL) combustor is presented using large-eddy simulations (LES) with tabulated chemistry. The modeling approach comprises a flamelet generated manifold (FGM) turbulent combustion model and an efficient discrete sectional method with clustering of sections (CDSM) to model soot formation. Three operating conditions are studied including a reference case without secondary air dilution and two cases with varying air dilution levels. For the latter, the split between primary and dilution air is varied from 80:20 to 60:40 expressed in percentage values. The study aims to investigate the effect of air dilution on the formation and oxidation of soot for various air splits using a direct comparison with the available experimental data. The results show a good correlation between predicted flame topology and spatial distribution of the soot volume fraction with the experimental observations. The introduction of air dilution is found to limit the production of soot with a more drastic reduction for the 40% dilution case compared to the 20% condition. Predicted particle size distributions (PSD) from the case without secondary air dilution correlate well with scanning mobility particle sizer (SMPS) measurements although fewer and smaller particles are predicted with air dilution. Leaner mixtures and enhanced oxidation, resulting from the interaction with air dilution jets, favor the decrease in soot formation., This project received funding from the Center of Excellence in Combustion project (grant agreement No 952181), the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C2 projects (Ministerio de Ciencia e Innovacion). LP acknowledges the Margarita Salas grant (Ministerio de Universidades, EU-Next Generation EU) and DM acknowledges the grant Ramon y Cajal RYC2021-034654-I. The authors acknowledge computer resources from Red Espanola de Supercomputacion, Spain (IM-2023-2-0011 and IM-2023-3-0013) .
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Assessment of dynamic adaptive chemistry with tabulated reactions for the simulation of unsteady multiregime combustion phenomena

  • Surapaneni, Anurag
  • Mira Martínez, Daniel
Solving chemistry is an integral part of reacting flow simulations, usually dominating the computational cost. Among the different strategies to accelerate the solution of chemistry and to achieve realizable simulations, the use of Dynamic Adaptive Chemistry (DAC) stands out among other methods. DAC methods are based on the use of reduced mechanisms generated from local conditions. The reduction process is computationally expensive and strategies for reducing the frequency of reduction and the re-utilization of the generated reduced mechanisms are key in making DAC methods computationally affordable. In this study, a new method hereby referred as Tabulated Reactions for Adaptive Chemistry (TRAC) is proposed to correlate chemical states with their reduced mechanisms in order to reduce both the frequency of reduction and to allow for re-utilization of reduced chemical schemes. TRAC introduces a mechanism tabulation strategy based on the use of a low-dimensional space that defines the thermo-chemical conditions for which specific reduced reaction mechanisms are stored. Chemistry reduction is achieved by the use of Path Flux Analysis (PFA) with a reaction rate-sensitivity method to achieve further reduction in the reaction mechanisms. The new TRAC proposal is applied to various canonical transient problems and the results are compared with reference solutions obtained from detailed chemistry calculations. A speedup of about 4x was achieved with TRAC while maintaining an error under 3% in the prediction of the major and minor species, flame structure, and flame propagation., This project has received funding from the European Research Council (ERC) under the European Unions Horizon 2020 research and innovation program (grant agreement No. 682383), the Center of Excellence in Combustion project (grant agreement No 952181), and the AHEAD PID2020-118387RB-C33 and ORION TRA2017-89139-C2-2-R projects from the Ministerio de Ciencia e Innovación. Anurag Surapaneni acknowledges the support from the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia and the European Social Fund., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Analysis of soot formation in a lab-scale Rich-Quench-Lean combustor using LES with tabulated chemistry

  • Pachano, Leonardo
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
A numerical study of the effects of air dilution on soot formation and particle dynamics in a lab-scale rich-quench-lean (RQL) combustor is presented using large-eddy simulations (LES) with tabulated chemistry. The modeling approach comprises a flamelet generated manifold (FGM) turbulent combustion model and an efficient discrete sectional method with clustering of sections (CDSM) to model soot formation. Three operating conditions are studied including a reference case without secondary air dilution and two cases with varying air dilution levels. For the latter, the split between primary and dilution air is varied from 80:20 to 60:40 expressed in percentage values. The study aims to investigate the effect of air dilution on the formation and oxidation of soot for various air splits using a direct comparison with the available experimental data. The results show a good correlation between predicted flame topology and spatial distribution of the soot volume fraction with the experimental observations. The introduction of air dilution is found to limit the production of soot with a more drastic reduction for the 40% dilution case compared to the 20% condition. Predicted particle size distributions (PSD) from the case without secondary air dilution correlate well with scanning mobility particle sizer (SMPS) measurements although fewer and smaller particles are predicted with air dilution. Leaner mixtures and enhanced oxidation, resulting from the interaction with air dilution jets, favor the decrease in soot formation., This project received funding from the Center of Excellence in Combustion project (grant agreement No 952181), the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C2 projects (Ministerio de Ciencia e Innovación). LP acknowledges the Margarita Salas grant (Ministerio de Universidades, EU-Next Generation EU) and DM acknowledges the grant Ramón y Cajal RYC2021-034654-I. The authors acknowledge computer resources from Red Española de Supercomputación, Spain (IM-2023-2-0011 and IM-2023-3-0013), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Effects of air dilution in a lean premixed swirl burner with mixture stratification

  • Guillamon, Carlos
  • Ramírez Correa, Elkin
  • García Oliver, Jose María
  • Mira, Daniel
Numerical simulations using LES with tabulated chemistry based on the Flamelet Generated Manifold (FGM) method are conducted with the aim to understand the influence of mixture stratification on the flame dynamics on a swirled burner with bluff body. This configuration consists of a main injection of premixed fuel (CH4) with air in rich conditions, injected into a coflow of swirled air which will further mix along a premixing length prior to the combustor, resulting into a global mixture burning in lean conditions. While maintaining the global equivalence ratio inside the combustion chamber to ϕg = 0.8, three operating conditions are simulated, which differ on the mass fraction of air premixed with methane (5, 10 and 15 %). Different flame topologies are obtained, and a qualitative comparison with experiments is performed., Research has been funded from the Ministerio de Ciencia e Innovación de España through the AHEAD project (PID2020118387RB-C33 and C31). Computer resources at MareNostrum 4 Supercomputer from BSC are acknowledged. CMT authors also acknowledge funding from Generalitat Valenciana through the DIALOGUE project (CIPROM/2022/24)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Numerical assessment of the effect of hydrogen enrichment of a technically premixed swirl-stabilized natural gas flame

  • Pachano Prieto, Leonardo
  • Surapaneni, Anurag
  • Both, Ambrus|||0000-0002-5267-204X
  • Ax, Holger
  • Petry, Niklas
  • Boxx, Isaac
  • Mira Martínez, Daniel
Publicat en accés obert amb el permís explícit de l'editorial., High-fidelity large eddy simulations (LES) are conducted for lean natural gas flames with different levels of hydrogen enrichment in a technically premixed swirl-stabilized combustor (PRECCINSTA) operated at atmospheric pressure. The modelling approach relies on tabulation of premixed flamelets and presumed-shape probability density functions (PDF) to account for subgrid turbulence-chemistry interactions. Results are presented for non-reacting and reacting conditions with 0, 40 and 50% hydrogen content in the natural gas. The influence of hydrogen-enrichment is investigated here by combining LES with Raman measurements. The assessment of LES shows good predictions of the flame stabilization mechanism, flow field and flame dynamics as compared to experiments. The natural gas flame develops a self-excited flow oscillation characterized as a precessing vortex core, which is well reproduced by the LES. The lean operation of the burner with natural gas shows a stable M-shape flame that transitions to a V-shape fully attached flame as the main fuel is blended with hydrogen. Raman measurements are compared with LES data to examine the flame structure and burning characteristics. It is concluded that hydrogen addition makes the flame more compact, induces higher reactivity of the fuel-air mixture and leads to a stable V-shape flame fully attached to the burner’s nozzle-cone., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 682383), the Center of Excellence in Combustion project (grant agreement No 952181), and the AHEAD PID2020-118387RB-C33 and ORION TRA2017-89139-C2-2-R projects from the Ministerio de Ciencia e Innovación. Leonardo Pachano acknowledges the Margarita Salas grant from Ministerio de Universidades (Spain) funded by the European Union-Next Generation EU. The authors thankfully acknowledge the computer resources from the RES (IM-2022-2-0003)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Numerical analysis of laminar velocity-forced premixed slit flames using modal decomposition techniques

  • Rodriguez Pastor, Marc
  • Koumides, Phivos|||0000-0002-5548-2057
  • Pérez Sánchez, Eduardo J.
  • García Tíscar, Jorge
  • Broatch Jacobi, Jaime Alberto
  • Mira Martínez, Daniel
The relation between Proper Orthogonal Decomposition (POD), Dynamic Mode Decomposition (DMD) and Flame Transfer Functions (FTF) is explored to gain further insight into the dynamics of two-dimensional laminar slit flames externally forced by velocity perturbations. The application of POD to the heat release rate fields suggests that the resultant modes can be split into two groups: the ones that are related to the displacement of the reactive sheet in the normal direction with regards to the flame front, and the ones that contain the local flame front distortions. The latter modes show preferential frequencies associated to the phase values of π, 2π and 3π of the FTFs, which can be related to the maximum gain value depending on the case. Furthermore, the results of the modal analysis seem to support that the flame tip dynamics can be conceptually modelled as a set of standing waves whose joint response can reconstruct a propagation in the normal flame front direction, generating also the temporal fluctuations of the spatially-integrated heat release in the domain. The DMD analysis shows the existence of an interaction between the flame and the flow, and illustrates the fundamental role played by the velocity perturbations at the base for the motion of the reactive sheet. Thus, the analysis shows how data-based decomposition methods can be used to identify complex physical phenomena contained in the FTF graphs with different levels of detail, and extend the modal analysis to the physical space., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the HyInHeat project grant agreement No. 101091456, AHEAD PID2020-118387RBC33, ORION TED2021-131618B-C22 and H2AERO CPP2022-009921 projects from the Ministerio de Ciencia e Innovación. MRP is supported by grant PRE2020-093592 funded by MCIN/ AEI/ 10.13039/5011 00011033 and by ‘‘ESF Investing in your future’’. DM acknowledges the grant Ayudas para contratos Ramón y Cajal (RYC 2021): RYC2021- 034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

LES investigation of soot formation in a turbulent non-premixed jet flame with sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • Both, Ambrus|||0000-0002-5267-204X
  • van Oijen, Jeroen
This study proposes a detailed soot modeling framework for large-eddy simulation (LES) to accurately predict soot formation and particle size distributions (PSD) in turbulent reacting flows. The framework incorporates Flamelet Generated Manifold (FGM) chemistry and a soot model based on the discrete sectional method (DSM) to predict both qualitative and quantitative sooting behavior while keeping the computational cost affordable. Two elementary modeling strategies are considered in the LES formalism for describing soot formation rates. These strategies rely on an a-priori tabulation of soot formation rates and their run-time computation. The LES formalism is applied to the simulations of a well-characterized, non-premixed, turbulent jet flame. A comparative analysis of strategies employed for filtered soot source term treatment is conducted to investigate their impact on the prediction of soot quantities and the evolution of soot PSDs. The LES results for the gas phase and soot phase are compared against the available experimental data. A good prediction of soot evolution is achieved with the two methodologies. The tabulation of soot formation rates leads to a significant reduction in computational cost compared to the model based on their explicit runtime computation. The LES results reveal that the modeling of filtered soot source terms has a significant impact on the quantitative prediction of soot formation. The possible reasons for the observed differences in the soot prediction are discussed. The run-time computation-based model provides a more consistent treatment of the non-linear interactions between the gas and soot phases in soot source terms compared to the tabulated soot chemistry approach. On the other hand, the tabulated soot chemistry model is an interesting and efficient modeling approach for predicting soot formation in turbulent conditions. Overall, both approaches have their strengths and limitations, and the choice of approach may depend on the specific needs of the application., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 projects from the Ministerio de Ciencia e Innovación. DM acknowledges the grant from the Ministerio de Ciencia e Innovación, Ayudas para contratos Ramón y Cajal (RYC) 2021: RYC2021-034654-I. The authors gratefully acknowledge the Partnership for Advanced Computing in Europe (PRACE) grant Soot Aero for computational resources and technical support in the numerical simulations., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Effects of air dilution in a lean premixed swirl burner with mixture stratification

  • Guillamon, Carlos
  • Ramírez Correa, Elkin
  • García Oliver, Jose María
  • Mira, Daniel
Numerical simulations using LES with tabulated chemistry based on the Flamelet Generated Manifold (FGM) method are conducted with the aim to understand the influence of mixture stratification on the flame dynamics on a swirled burner with bluff body. This configuration consists of a main injection of premixed fuel (CH4) with air in rich conditions, injected into a coflow of swirled air which will further mix along a premixing length prior to the combustor, resulting into a global mixture burning in lean conditions. While maintaining the global equivalence ratio inside the combustion chamber to ϕg = 0.8, three operating conditions are simulated, which differ on the mass fraction of air premixed with methane (5, 10 and 15 %). Different flame topologies are obtained, and a qualitative comparison with experiments is performed., Research has been funded from the Ministerio de Ciencia e Innovación de España through the AHEAD project (PID2020118387RB-C33 and C31). Computer resources at MareNostrum 4 Supercomputer from BSC are acknowledged. CMT authors also acknowledge funding from Generalitat Valenciana through the DIALOGUE project (CIPROM/2022/24)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Analysis of soot formation in a lab-scale Rich-Quench-Lean combustor using LES with tabulated chemistry

  • Pachano, Leonardo
  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • van Oijen, Jeroen
A numerical study of the effects of air dilution on soot formation and particle dynamics in a lab-scale rich-quench-lean (RQL) combustor is presented using large-eddy simulations (LES) with tabulated chemistry. The modeling approach comprises a flamelet generated manifold (FGM) turbulent combustion model and an efficient discrete sectional method with clustering of sections (CDSM) to model soot formation. Three operating conditions are studied including a reference case without secondary air dilution and two cases with varying air dilution levels. For the latter, the split between primary and dilution air is varied from 80:20 to 60:40 expressed in percentage values. The study aims to investigate the effect of air dilution on the formation and oxidation of soot for various air splits using a direct comparison with the available experimental data. The results show a good correlation between predicted flame topology and spatial distribution of the soot volume fraction with the experimental observations. The introduction of air dilution is found to limit the production of soot with a more drastic reduction for the 40% dilution case compared to the 20% condition. Predicted particle size distributions (PSD) from the case without secondary air dilution correlate well with scanning mobility particle sizer (SMPS) measurements although fewer and smaller particles are predicted with air dilution. Leaner mixtures and enhanced oxidation, resulting from the interaction with air dilution jets, favor the decrease in soot formation., This project received funding from the Center of Excellence in Combustion project (grant agreement No 952181), the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C2 projects (Ministerio de Ciencia e Innovación). LP acknowledges the Margarita Salas grant (Ministerio de Universidades, EU-Next Generation EU) and DM acknowledges the grant Ramón y Cajal RYC2021-034654-I. The authors acknowledge computer resources from Red Española de Supercomputación, Spain (IM-2023-2-0011 and IM-2023-3-0013), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Assessment of dynamic adaptive chemistry with tabulated reactions for the simulation of unsteady multiregime combustion phenomena

  • Surapaneni, Anurag
  • Mira Martínez, Daniel
Solving chemistry is an integral part of reacting flow simulations, usually dominating the computational cost. Among the different strategies to accelerate the solution of chemistry and to achieve realizable simulations, the use of Dynamic Adaptive Chemistry (DAC) stands out among other methods. DAC methods are based on the use of reduced mechanisms generated from local conditions. The reduction process is computationally expensive and strategies for reducing the frequency of reduction and the re-utilization of the generated reduced mechanisms are key in making DAC methods computationally affordable. In this study, a new method hereby referred as Tabulated Reactions for Adaptive Chemistry (TRAC) is proposed to correlate chemical states with their reduced mechanisms in order to reduce both the frequency of reduction and to allow for re-utilization of reduced chemical schemes. TRAC introduces a mechanism tabulation strategy based on the use of a low-dimensional space that defines the thermo-chemical conditions for which specific reduced reaction mechanisms are stored. Chemistry reduction is achieved by the use of Path Flux Analysis (PFA) with a reaction rate-sensitivity method to achieve further reduction in the reaction mechanisms. The new TRAC proposal is applied to various canonical transient problems and the results are compared with reference solutions obtained from detailed chemistry calculations. A speedup of about 4x was achieved with TRAC while maintaining an error under 3% in the prediction of the major and minor species, flame structure, and flame propagation., This project has received funding from the European Research Council (ERC) under the European Unions Horizon 2020 research and innovation program (grant agreement No. 682383), the Center of Excellence in Combustion project (grant agreement No 952181), and the AHEAD PID2020-118387RB-C33 and ORION TRA2017-89139-C2-2-R projects from the Ministerio de Ciencia e Innovación. Anurag Surapaneni acknowledges the support from the Secretariat for Universities and Research of the Ministry of Business and Knowledge of the Government of Catalonia and the European Social Fund., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

LES investigation of soot formation in a turbulent non-premixed jet flame with sectional method and FGM chemistry

  • Kalbhor, Abhijit
  • Mira Martínez, Daniel
  • Both, Ambrus
  • van Oijen, Jeroen
This study proposes a detailed soot modeling framework for large-eddy simulation (LES) to accurately predict soot formation and particle size distributions (PSD) in turbulent reacting flows. The framework incorporates Flamelet Generated Manifold (FGM) chemistry and a soot model based on the discrete sectional method (DSM) to predict both qualitative and quantitative sooting behavior while keeping the computational cost affordable. Two elementary modeling strategies are considered in the LES formalism for describing soot formation rates. These strategies rely on an a-priori tabulation of soot formation rates and their run-time computation. The LES formalism is applied to the simulations of a well-characterized, non-premixed, turbulent jet flame. A comparative analysis of strategies employed for filtered soot source term treatment is conducted to investigate their impact on the prediction of soot quantities and the evolution of soot PSDs. The LES results for the gas phase and soot phase are compared against the available experimental data. A good prediction of soot evolution is achieved with the two methodologies. The tabulation of soot formation rates leads to a significant reduction in computational cost compared to the model based on their explicit runtime computation. The LES results reveal that the modeling of filtered soot source terms has a significant impact on the quantitative prediction of soot formation. The possible reasons for the observed differences in the soot prediction are discussed. The run-time computation-based model provides a more consistent treatment of the non-linear interactions between the gas and soot phases in soot source terms compared to the tabulated soot chemistry approach. On the other hand, the tabulated soot chemistry model is an interesting and efficient modeling approach for predicting soot formation in turbulent conditions. Overall, both approaches have their strengths and limitations, and the choice of approach may depend on the specific needs of the application., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 projects from the Ministerio de Ciencia e Innovación. DM acknowledges the grant from the Ministerio de Ciencia e Innovación, Ayudas para contratos Ramón y Cajal (RYC) 2021: RYC2021-034654-I. The authors gratefully acknowledge the Partnership for Advanced Computing in Europe (PRACE) grant Soot Aero for computational resources and technical support in the numerical simulations., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Numerical assessment of the effect of hydrogen enrichment of a technically premixed swirl-stabilized natural gas flame

  • Pachano Prieto, Leonardo
  • Surapaneni, Anurag
  • Both, Ambrus
  • Ax, Holger
  • Petry, Niklas
  • Boxx, Isaac
  • Mira Martínez, Daniel
Publicat en accés obert amb el permís explícit de l'editorial., High-fidelity large eddy simulations (LES) are conducted for lean natural gas flames with different levels of hydrogen enrichment in a technically premixed swirl-stabilized combustor (PRECCINSTA) operated at atmospheric pressure. The modelling approach relies on tabulation of premixed flamelets and presumed-shape probability density functions (PDF) to account for subgrid turbulence-chemistry interactions. Results are presented for non-reacting and reacting conditions with 0, 40 and 50% hydrogen content in the natural gas. The influence of hydrogen-enrichment is investigated here by combining LES with Raman measurements. The assessment of LES shows good predictions of the flame stabilization mechanism, flow field and flame dynamics as compared to experiments. The natural gas flame develops a self-excited flow oscillation characterized as a precessing vortex core, which is well reproduced by the LES. The lean operation of the burner with natural gas shows a stable M-shape flame that transitions to a V-shape fully attached flame as the main fuel is blended with hydrogen. Raman measurements are compared with LES data to examine the flame structure and burning characteristics. It is concluded that hydrogen addition makes the flame more compact, induces higher reactivity of the fuel-air mixture and leads to a stable V-shape flame fully attached to the burner’s nozzle-cone., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 682383), the Center of Excellence in Combustion project (grant agreement No 952181), and the AHEAD PID2020-118387RB-C33 and ORION TRA2017-89139-C2-2-R projects from the Ministerio de Ciencia e Innovación. Leonardo Pachano acknowledges the Margarita Salas grant from Ministerio de Universidades (Spain) funded by the European Union-Next Generation EU. The authors thankfully acknowledge the computer resources from the RES (IM-2022-2-0003)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Numerical analysis of laminar velocity-forced premixed slit flames using modal decomposition techniques

  • Rodriguez Pastor, Marc
  • Koumides, Phivos
  • Pérez Sánchez, Eduardo J.
  • García Tíscar, Jorge
  • Broatch Jacobi, Jaime Alberto
  • Mira Martínez, Daniel
The relation between Proper Orthogonal Decomposition (POD), Dynamic Mode Decomposition (DMD) and Flame Transfer Functions (FTF) is explored to gain further insight into the dynamics of two-dimensional laminar slit flames externally forced by velocity perturbations. The application of POD to the heat release rate fields suggests that the resultant modes can be split into two groups: the ones that are related to the displacement of the reactive sheet in the normal direction with regards to the flame front, and the ones that contain the local flame front distortions. The latter modes show preferential frequencies associated to the phase values of π, 2π and 3π of the FTFs, which can be related to the maximum gain value depending on the case. Furthermore, the results of the modal analysis seem to support that the flame tip dynamics can be conceptually modelled as a set of standing waves whose joint response can reconstruct a propagation in the normal flame front direction, generating also the temporal fluctuations of the spatially-integrated heat release in the domain. The DMD analysis shows the existence of an interaction between the flame and the flow, and illustrates the fundamental role played by the velocity perturbations at the base for the motion of the reactive sheet. Thus, the analysis shows how data-based decomposition methods can be used to identify complex physical phenomena contained in the FTF graphs with different levels of detail, and extend the modal analysis to the physical space., The research leading to these results has received funding from the European Union’s Horizon 2020 Programme under the HyInHeat project grant agreement No. 101091456, AHEAD PID2020-118387RBC33, ORION TED2021-131618B-C22 and H2AERO CPP2022-009921 projects from the Ministerio de Ciencia e Innovación. MRP is supported by grant PRE2020-093592 funded by MCIN/ AEI/ 10.13039/5011 00011033 and by ‘‘ESF Investing in your future’’. DM acknowledges the grant Ayudas para contratos Ramón y Cajal (RYC 2021): RYC2021- 034654-I from Ministerio de Ciencia e Innovación., Peer Reviewed, Postprint (author's final draft)