Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

LES of a pressurized sooting aero-engine model burner using a computationally efficient discrete sectional method coupled to tabulated

  • García-Oliver, José M|||0000-0002-2676-9681
  • Pastor Enguídanos, José Manuel|||0000-0003-4458-0353
  • Olmeda-Ramiro, Iván
  • Kalbhor, A.
  • Mira Martínez, Daniel
  • Van-Oijen, Jeroen
[EN] This work is focused on the modeling and analysis of soot formation and oxidation in the pressurized ethylene-based model burner investigated at DLR. This burner features a dual swirler configuration for the primary air supply and includes secondary dilution jets inside the combustion chamber, showing reacting flow characteristics representative of the RQL combustor technology. Large-eddy simulations (LES) of the DLR burner are conduced here to assess a coupling approach between flamelet generated manifold (FGM) chemistry and discrete sectional method (DSM) based soot model with clustering method. First, a validation of the numerical results is conducted for the gas velocity and temperature fields, and good agreement is obtained for both mean and fluctuating quantities. The Soot Volume Fraction (SVF) computed from LES shows a satisfactory agreement with the experimental data in both SVF distribution and magnitude. The analysis also includes a numerical investigation of the soot production and the Particle Size Distributions (PSD). Finally, the configuration without secondary air is evaluated and an accurate prediction of the SVF field is also obtained. In this case, the absence of dilution air strongly influences the central region of the combustion chamber, and soot distribution and PSD are mainly affected by transport and dilution, not oxidation. It is finally concluded the proposed modeling framework is capable of predicting the soot field and particle size distributions inside the combustor for both operating conditions., The research leading to these results has received funding from the European Union's Horizon 2020 Programme under the ESTiMatE project, grant agreement No. 821418, and the AHEAD PID2020-118387RB-C33 and SAFLOW TED2021-131618B-C21 and TED2021-131618B-C22 projects from the Ministerio de Ciencia e Innovacion, Spain. We acknowledge PRACE for awarding us access through the SootAero project to HAWK at GCS@HLRS, Germany. The authors thankfully acknowledge the computer resources at LaPalma and MareNos-trum, and the technical support provided by Instituto de Astrofisica de Canarias (IM-2021-2-0027) and Barcelona Supercomputing Center (IM-2021-3-0016) . I. Olmeda acknowledges the Ayuda de Formacion de Profesorado Universitario (FPU 18/03065) from the Subprograma de Estatal de Formacion del Ministerio de Ciencia, Innovacion y Universidades of Spain. DM acknowledges the grant Ayudas para contratos Ramon y Cajal (RYC) 2021: RYC2021-034654-I from Ministerio de Ciencia e Innovacion.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Numerical simulation of liquid sheet formation and primary atomization in a simplex pressure-swirl atomizer through a VOF-LES approach

  • Salvador, Francisco Javier|||0000-0003-3269-2251
  • Carreres, Marcos|||0000-0001-6430-6613
  • Muñoz-Agulló, Alicia|||0009-0008-0707-499X
  • Demoulin, François-Xavier
[EN] Numerical simulations of the atomization issued by pressure-swirl injectors can help improve their design to reduce CO2 and NOx power plant emissions. In particular, two-phase flow simulations allow the characterization of the resulting spray through characteristic droplet sizes and velocities. This computational work focuses on the liquid atomization of n-heptane in the simplex pressure-swirl atomizer of the CORIA Rouen Spray Burner (CRSB). The present work proposes the simultaneous numerical resolution of the internal flow and atomization development through a Volume of Fluid-Large Eddy Simulation (VOF-LES) approach using a hexahedral mesh and Adaptive Mesh Refinement (AMR). A nonreactive condition has been tested with the interIsoFoam solver of the OpenFOAM open-source toolbox. First, the achieved results are analyzed in terms of qualitative properties, such as spray development and vortex visualization. Then, the internal flow is studied from both the air core radius and the film thickness evolution along the axial length. Finally, droplet statistics are obtained through a droplet detection algorithm based on a volume fraction threshold. For validation purposes, the numerical results are compared with available Phase Doppler Anemometry (PDA) experimental data for this operating condition of the CRSB academic burner. The investigation demonstrates the capability of the proposed numerical methodology to predict the physics under the primary atomization process, allowing us to describe the air core formation and to capture the instabilities that trigger the jet breakup, leading to the spray evolution., This work is part of the R+D+I project "Modelado de combustible sostenible de aviacion para bajas emisiones. Atomizacion (SAFLOW-BREAK)", reference TED2021131618A-C22, funded by MCIN/AEI/10.13039/501100011033 and by the European Union "NextGenerationEU/PRTR". The authors thankfully acknowledge the computer resources at MareNostrum4 Supercomputer and technical support provided by the BSC (RES IM-2022-3-0011 and IM-2023-1-0004) in the frame of the Spanish Supercomputing Network. On the other hand, the support given to Ms. Alicia Munoz by the Generalitat Valenciana within the program "Subvenciones para contratacion de personal investigador predoctoral (CIACIF/2022/067)" is gratefully acknowledged. The authors would also like to thank Dr. Diego Ferrando for his help and support with the case setup and the fruitful discussions on the results.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transient nozzle flow analysis and near-field characterization of gasoline direct fuel injectors under different surrogate fuel and flash boiling conditions

  • Martínez, Maria
  • Martí-Aldaravi, Pedro
  • Martínez-Miracle, Enrique Carlos
  • Salvador, Francisco Javier|||0000-0003-3269-2251
[EN] This article focuses on understanding the transient effects of the gasoline direct injection (GDi) process, which plays an important role in mixture formation and combustion efficiency in this type of engine. Owing to the growing interest of the scientific community in better understanding the performance of engines with other alternative fuels, this work includes not only iso-octane as a substitute fuel for gasoline but also surrogate fuels such as hexane, pentane, heptane, ethanol, and multiple components. In GDi injections, the injector plays a major role in defining the air-fuel mixture quality. The study of these phenomena has become challenging because of the reduced size of the orifices, high flow velocities, and multiphasic flows. Computational fluid dynamics (CFD) tools allow insight and understanding into complex flow physics, which are considered in this research. Unsteady Reynolds-Averaged Navier Stokes (URANS) is selected to account for the turbulent effects. The volume-of-fluid (VOF) approach is employed to analyze the flow inside the nozzle and the first 2-5 mm of the spray. A homogeneous relaxation model (HRM) accounts for the mass exchange between flow phases. Validation against experimental data proves how the variation in discharge pressure minimally influences the macroscopic parameters of internal flow. The density and volatility of different fuels directly affect injection. This effect must be considered, especially in flash boiling conditions, where fuels with a greater tendency toward phase change produce strong flash boiling, resulting in a higher probability of spray collapse and lower engine performance., This research was funded by Agencia Estatal de Investigación of the Spanish Government, project Modelado de combustible sostenible de aviación para bajas emisiones. Atomización. (TED2021-131618A-C22). Additionally, the authors would like to thank the Fundación del Centro de Supercomputación de Castilla y León (FCSCL) and ACT now HPC Cloud Cluster for allowing the use of their clusters to perform part of the simulations carried out in this work. The Ph.D. studies by Enrique C. Martínez-Miracle have been funded by the Agencia Estatal de Investigación of the Spanish Government and the ESF (European Social Fund), project Desarrollo de modelos de combustión y emisiones HPC para el análisis de plantas propulsivas de transporte sostenibles (TRA2017-89139-C2-1-R) by means of the Subprograma Estatal de Formación del Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i . Finally, this work was carried out while Dr. María Martínez was on a grant with reference ACIF/2018/118 financed by the Government of Generalitat Valenciana and financial support from the European Union