Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 366
Encontrada(s) 4 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Impact of outdoor air pollution on severity and mortality in COVID-19 pneumonia

  • García-García, Fernando
  • Bronte, Olaia
  • Lee, Dae-Jin
  • Urrutia Landa, Isabel
  • Uranga, Ane
  • Nieves Ermecheo, Mónica
  • Quintana, José María
  • Arostegui, Inmaculada
  • Zalacain, Rafael
  • Ruiz-Iturriaga, Ainhize
  • Serrano, Laura
  • Menéndez, Rosario
  • Mendez, R
  • Torres, Antoni
  • Martínez-Minaya, Joaquín|||0000-0002-1016-8734
[EN] The relationship between exposure to air pollution and the severity of coronavirus disease 2019 (COVID-19) pneumo-nia and other outcomes is poorly understood. Beyond age and comorbidity, risk factors for adverse outcomes including death have been poorly studied. The main objective of our study was to examine the relationship between exposure to outdoor air pollution and the risk of death in patients with COVID-19 pneumonia using individual-level data. The sec-ondary objective was to investigate the impact of air pollutants on gas exchange and systemic inflammation in this dis-ease. This cohort study included 1548 patients hospitalised for COVID-19 pneumonia between February and May 2020 in one of four hospitals. Local agencies supplied daily data on environmental air pollutants (PM10, PM2.5, O3, NO2, NO and NOX) and meteorological conditions (temperature and humidity) in the year before hospital admission (from Jan-uary 2019 to December 2019). Daily exposure to pollution and meteorological conditions by individual postcode of residence was estimated using geospatial Bayesian generalised additive models. The influence of air pollution on pneumonia severity was studied using generalised additive models which included: age, sex, Charlson comorbidity index, hospital, average income, air temperature and humidity, and exposure to each pollutant. Additionally, general-ised additive models were generated for exploring the effect of air pollution on C-reactive protein (CRP) level and SpO2/FiO2 at admission. According to our results, both risk of COVID-19 death and CRP level increased significantly with median exposure to PM10, NO2, NO and NOX, while higher exposure to NO2, NO and NOX was associated with lower SpO2/FiO2 ratios. In conclusion, after controlling for socioeconomic, demographic and health-related variables, we found evidence of a significant positive relationship between air pollution and mortality in patients hospitalised for COVID-19 pneumonia. Additionally, inflammation (CRP) and gas exchange (SpO2/FiO2) in these patients were signif-icantly related to exposure to air pollution., This research work was partially funded by the Spanish Respiratory and Thoracic Surgery Association (SEPAR) [grant number 004-2021].This research was also partially funded by the Department of Education of the Basque Government through an Artificial Intelligence in BCAM grant [grant number 00432-2019], the Mathematical Modelling Applied to Health' strategy, the BERC 2018-2021 & amp; 2022-2025 programmes and the Consolidated Research Group MATHMODE [IT1456-22]; and by the Spanish Ministry of Science, Innovation and Universities under BCAM Severo Ochoa accreditation SEV-2017-0718, as well as by the Spanish State Research Agency (AEI) through project S3M1P4R [PID2020-115882RB-I00].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cardiac computational modelling, Modelización computacional cardiaca

  • Bragard, Jean R.
  • Cámara, Óscar
  • Echebarria, Blas
  • Giorda, Luca Gerardo
  • Pueyo, Esther
  • Sebastián, Rafael
  • Soudah, Eduardo
  • Vázquez, Mariano
  • Saiz Rodríguez, Francisco Javier|||0000-0002-9850-0825
[EN] Cardiovascular diseases currently have a major social and economic impact, constituting one of the leading causes of mortality and morbidity. Personalized computational models of the heart are demonstrating their usefulness both to help understand the mechanisms underlying cardiac disease, and to optimize their treatment and predict the patient's response. Within this framework, the Spanish Research Network for Cardiac Computational Modelling (VHeart-SN) has been launched. The general objective of the VHeart-SN network is the development of an integrated, modular and multiscale multiphysical computational model of the heart. This general objective is addressed through the following specific objectives: a) to integrate the different numerical methods and models taking into account the specificity of patients; b) to assist in advancing knowledge of the mechanisms associated with cardiac and vascular diseases; and c) to support the application of different personalized therapies. This article presents the current state of cardiac computational modelling and different scientific works conducted by the members of the network to gain greater understanding of the characteristics and usefulness of these models., [ES] Las enfermedades cardiovasculares tienen en la actualidad un gran impacto social y económico y constituyen una de las principales causas de mortalidad y morbilidad. Los modelos computacionales personalizados del corazón están demostrando ser útiles tanto para ayudar a comprender los mecanismos subyacentes a las patologías cardiacas como para optimizar su tratamiento prediciendo la respuesta del paciente. En este contexto, se ha puesto en marcha la Red Española de Investigación en Modelización Computacional Cardiaca (V-Heart SN). El objetivo general de V-Heart SN es el desarrollo de un modelo computacional multifísico y multiescala integrado del corazón. Este objetivo general se aborda a través de los siguientes objetivos específicos: a) integrar los diferentes modelos numéricos teniendo en cuenta la especificidad de los pacientes; b) ayudar a avanzar en el conocimiento de los mecanismos asociados a las diferentes patologías cardiacas y vasculares; y c) apoyar la aplicación de terapias personalizadas. Este artículo presenta el estado actual de la modelización computacional cardiaca y los diferentes trabajos científicos desarrollados por los miembros de la red para favorecer una mayor comprensión de las características y utilidad de los modelos., This work was partially supported by: Acciones de Dinamización Redes de Excelencia 2016, Plan Estatal de Investigación Científica y Técnica y de Innovación, Ministerio de Economía y Competitividad (DPI2016-81873-REDT) and CompBioMed2, Grant agreement ID: 823712. The authors also thank the support of the European Research Council (ERC-StG 638284) and the Spanish Goverment through the following programmes: Retos I+D (TIN2014-59932-JIN, RTI2018-093416-B-I00, SAF2017-88019-C3-3R, RTI2018- 101193-B-I00, DPI2016-75799-R and PID2019-105674RB-I00); María de Maeztu (MDM-2015-0502); and Severo Ochoa (SEV2017-0718 and CEX2018-000797-S)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A roadmap to integrate astrocytes into Systems Neuroscience

  • Kastanenka, K.V.
  • Moreno-Bote, R.
  • De Pittà, M.
  • Perea, Gertrudis
  • Eraso-Pichot, A.
  • Masgrau, Laura
  • Poskanzer, Kira E.
  • Galea, Elena
Systems neuroscience is still mainly a neuronal field, despite the plethora of evidence supporting the fact that astrocytes modulate local neural circuits, networks, and complex behaviors. In this article, we sought to identify which types of studies are necessary to establish whether astrocytes, beyond their well-documented homeostatic and metabolic functions, perform computations implementing mathematical algorithms that sub-serve coding and higher-brain functions. First, we reviewed Systems-like studies that include astrocytes in order to identify computational operations that these cells may perform, using Ca transients as their encoding language. The analysis suggests that astrocytes may carry out canonical computations in a time scale of subseconds to seconds in sensory processing, neuromodulation, brain state, memory formation, fear, and complex homeostatic reflexes. Next, we propose a list of actions to gain insight into the outstanding question of which variables are encoded by such computations. The application of statistical analyses based on machine learning, such as dimensionality reduction and decoding in the context of complex behaviors, combined with connectomics of astrocyte–neuronal circuits, is, in our view, fundamental undertakings. We also discuss technical and analytical approaches to study neuronal and astrocytic populations simultaneously, and the inclusion of astrocytes in advanced modeling of neural circuits, as well as in theories currently under exploration such as predictive coding and energy-efficient coding. Clarifying the relationship between astrocytic Ca and brain coding may represent a leap forward toward novel approaches in the study of astrocytes in health and disease., The authors thank Amit Agarwal of the Institute for Anatomy and CellBiology, Heidelberg University, Germany, and Alfonso Araque of the20KASTANENKAET AL. Department of Neuroscience, University of Minnesota, USA, for criti-cal reading of the manuscript. The authors also thank Tom Yohannanfor copy-editing. Authors declare no conflict of interest. The work wasfunded by the following agencies: BFU2017-85936-P and FLAGERA-PCIN-2015-162-C02-02 from MINECO (Spain) and the HowardHughes Medical Institute (HHMI; ref 55008742) to R.M-B; Ministeriode Educacion, Cultura y Deporte (Spain), FPU13/05377 to AEP. The“Junior Leader”Fellowship Program by“la Caixa”Foundation, theEusko Jaurlaritza through the BERC 2018-2021 program, and the Span-ish Ministry of Science, Innovation and Universities by the BCAMSevero Ochoa accreditation SEV-2017-0718 to MDP; MINECO,BFU2016-75107-P to G.P. NIH R01NS099254 and NSF 1604544 toKEP; Agència de Gestio d'Ajuts Universitaris i de Recerca, 2017SGR547 to EG. MINECO, BFU2016-79735-P to EG and RM.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Modelización computacional cardiaca

  • Bragard, J.R.
  • Camara, O.
  • Echebarria, B.
  • Gerardo Giorda, L.
  • Pueyo, E.
  • Saiz, J.
  • Sebastián, R.
  • Soudah, E.
  • Vázquez, M.
Cardiovascular diseases currently have a major social and economic impact, constituting one of the leading causes of mortality and morbidity. Personalized computational models of the heart are demonstrating their usefulness both to help understand the mechanisms underlying cardiac disease, and to optimize their treatment and predict the patient''s response. Within this framework, the Spanish Research Network for Cardiac Computational Modelling (VHeart-SN) has been launched. The general objective of the VHeart-SN network is the development of an integrated, modular and multiscale multiphysical computational model of the heart. This general objective is addressed through the following specific objectives: a) to integrate the different numerical methods and models taking into account the specificity of patients; b) to assist in advancing knowledge of the mechanisms associated with cardiac and vascular diseases; and c) to support the application of different personalized therapies. This article presents the current state of cardiac computational modelling and different scientific works conducted by the members of the network to gain greater understanding of the characteristics and usefulness of these models.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Local invariants of minimal generic curves on rational surfaces

  • Cogolludo-Agustín, José
  • László, Tamás
  • Martín-Morales, Jorge
  • Némethi, András
Let (C, 0) be a reduced curve germ in a normal surface singularity (X, 0). The main goal is to recover the delta invariant [delta](C) of the abstract curve (C, 0) from the topology of the embedding (C, 0) ⊂ (X, 0). We give explicit formulae whenever (C, 0) is minimal generic and (X, 0) is rational (as continuation of [8, 9]). Additionally, in this case, we prove that if (X, 0) is a quotient singularity, then [delta](C) only admits the values r−1 or r, where r is the number or irreducible components of (C, 0). ([delta](C) = r − 1 realizes the extremal lower bound, valid only for 'ordinary r–tuples'.)
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Delta invariant of curves on rational surfaces I. An analytic approach

  • Cogolludo-Agustín J.I.
  • László T.
  • Martín-Morales J.
  • Némethi A.
We prove that if (C, 0) is a reduced curve germ on a rational surface singularity (X, 0) then its delta invariant can be recovered by a concrete expression associated with the embedded topological type of the pair C X. Furthermore, we also identify it with another (a priori) embedded analytic invariant, which is motivated by the theory of adjoint ideals. Finally, we connect our formulae with the local correction term at singular points of the global Riemann-Roch formula, valid for projective normal surfaces, introduced by Blache.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Sensitivity and uncertainty analysis by discontinuous Galerkin of lock-in thermography for crack characterization

  • Omella, Á.J.
  • Celorrio, R.
  • Pardo, D.
This work focuses on the characterization of narrow vertical cracks of finite size using optically excited lock-in thermography (OLT). To characterize these cracks, we need to solve an ill-posed inverse problem. As a previous step to the solution of this inverse problem, we propose a sensitivity analysis to quantify the influence that the parameters involved in the model have on the surface temperature. Some of these parameters are estimated at the laboratory and they incorporate uncertainty that may severely affect the reconstruction of thin cracks. For this reason, we design a calibration criterion based on the sensitivity analysis to determine which parameters we need to include as unknowns of the inverse problem. We perform this analysis using a numerical discontinuous Galerkin method. Additionally, we propose a theoretical noise model for the thermograms. Then, we use a weighted least square method (WLS) to determine the parameters from the experimental thermograms. We also obtain a theoretical uncertainty of the reconstructed parameters in OLT-WLS fitting according to the used surface temperature dataset. Finally, we perform a numerical experiment with a 2.4 m-thick vertical crack to show the sensitivities of the surface temperature with respect to the model parameters. We also determine the uncertainty of the parameters under different datasets with known noise characteristics.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Impact of electrode tip shape on catheter performance in cardiac radiofrequency ablation

  • Petras, Argyrios
  • Moreno Weidmann, Zoraida|||0000-0003-1071-4077
  • Echeverría Ferrero, Marina
  • Leoni, Massimiliano
  • Guerra Ramos, José María|||0000-0001-5397-9177
  • Gerardo-Giorda, Luca
The role of catheter tip shape on the safety and efficacy of radiofrequency (RF) ablation has been overlooked, although differences have been observed in clinical and research fields. The purpose of this study was to analyze the role of electrode tip shape in RF ablation using a computational model. We simulated 108 RF ablations through a realistic 3-dimensional computational model considering 2 clinically used, open-irrigated catheters (spherical and cylindrical tip), varying contact force (CF), blood flow, and irrigation. Lesions are defined by the 50°C isotherm contour and evaluated by means of width, depth, depth at maximum width, and volume. Ablations are deemed as safe, critical (tissue temperature.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Interaction with a hand rehabilitation exoskeleton in EMG-driven bilateral therapy: influence of visual biofeedback on the users' performance

  • Cisnal, Ana
  • Gordaliza Pastor, Paula
  • Pérez Turiel, Javier
  • Fraile, Juan Carlos
The effectiveness of EMG biofeedback with neurorehabilitation robotic platforms has not been previously addressed. The present work evaluates the influence of an EMG-based visual biofeedback on the user performance when performing EMG-driven bilateral exercises with a robotic hand exoskeleton. Eighteen healthy subjects were asked to perform 1-min randomly generated sequences of hand gestures (rest, open and close) in four different conditions resulting from the combination of using or not (1) EMG-based visual biofeedback and (2) kinesthetic feedback from the exoskeleton movement. The user performance in each test was measured by computing similarity between the target gestures and the recognized user gestures using the L2 distance. Statistically significant differences in the subject performance were found in the type of provided feedback (p-value 0.0124). Pairwise comparisons showed that the L2 distance was statistically significantly lower when only EMG-based visual feedback was present (2.89 ± 0.71) than with the presence of the kinesthetic feedback alone (3.43 ± 0.75, p-value = 0.0412) or the combination of both (3.39 ± 0.70, p-value = 0.0497). Hence, EMG-based visual feedback enables subjects to increase their control over the movement of the robotic platform by assessing their muscle activation in real time. This type of feedback could benefit patients in learning more quickly how to activate robot functions, increasing their motivation towards rehabilitation., This research was funded by the Ministry of Science and Innovation through research project RTC2019-007350-1, TICCYL Digital S.L. company, the Regional Ministry of Education for the pre-doctoral recruitment of research staff co-financed by the European Social Fund (ESF), the Basque Government through the BERC 2022-2025 program and Elkartek project 3KIA (KK-2020/00049), and by the Spanish Ministry of Science, Innovation, and Universities (BCAM Severo Ochoa accreditation SEV-2017-0718).
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

A two-stage approach for the spatio-temporal analysis of high-throughput phenotyping data

  • Pérez Valencia, Diana M.
  • Rodriguez Alvarez, Maria Jose
  • Boer, Martin P.
  • Kronenberg, Lukas
  • Hund, Andreas
  • Cabrera Bosquet, Llorenç
  • Millet, Emilie J.
  • Eeuwijk, Fred A. van
High throughput phenotyping (HTP) platforms and devices are increasingly used for the characterization of growth and developmental processes for large sets of plant genotypes. Such HTP data require challenging statistical analyses in which longitudinal genetic signals need to be estimated against a background of spatio-temporal noise processes. We propose a two-stage approach for the analysis of such longitudinal HTP data. In a first stage, we correct for design features and spatial trends per time point. In a second stage, we focus on the longitudinal modelling of the spatially corrected data, thereby taking advantage of shared longitudinal features between genotypes and plants within genotypes. We propose a flexible hierarchical three-level P-spline growth curve model, with plants/plots nested in genotypes, and genotypes nested in populations. For selection of genotypes in a plant breeding context, we show how to extract new phenotypes, like growth rates, from the estimated genotypic growth curves and their first-order derivatives. We illustrate our approach on HTP data from the PhenoArch greenhouse platform at INRAE Montpellier and the outdoor Field Phenotyping platform at ETH Zürich., Ministerio de Ciencia, Innovación y Universidades | Ref. BCAM Severo Ochoa accreditation SEV-2017-0718, Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung | Ref. project PhenoCOOL (project no. 169542), Horizon 2020 Framework Programme | Ref. grant agreement ID 731013 (EPPN2020), Ministerio de Ciencia, Innovación y Universidades | Ref. MTM2017-82379-R
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Existence of weak solutions for a general porous medium equation with nonlocal pressure

  • Stan, D.
  • Del Teso, F.
  • Vázquez, J.L.
We study the general nonlinear diffusion equation $u_t=\nabla\cdot (u^{m-1}\nabla (-\Delta)^{-s}u)$ that describes a flow through a porous medium which is driven by a nonlocal pressure. We consider constant parameters $m>1$ and $0<s<1$, we assume that the solutions are non-negative and the problem is posed in the whole space. In this paper we prove existence of weak solutions for all integrable initial data $u_0 \ge 0$ and for all exponents $m>1$ by developing a new approximating method that allows to treat the range $m\ge 3$ that could not be covered by previous works. We also consider as initial data any non-negative measure $\mu$ with finite mass. In passing from bounded initial data to measure data we make strong use of an $L^1$-$L^\infty$ smoothing effect and other functional inequalities. Finite speed of propagation is established for all $m\ge 2$, which implies the existence of free boundaries. The authors had already proved that finite propagation does not hold for $m<2$.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Optimized Schwarz Methods in the Stokes-Darcy Coupling

  • Discacciati, M.
  • Gerardo-Giorda, L.
This article studies optimized Schwarz methods for the Stokes–Darcy problem. Robin transmission conditions are introduced, and the coupled problem is reduced to a suitable interface system that can be solved using Krylov methods. Practical strategies to compute optimal Robin coefficients are proposed, which take into account both the physical parameters of the problem and the mesh size. Numerical results show the effectiveness of our approach., European Union Seventh Framework Programme (FP7/2007-2013; grant 294229) to M. Discacciati
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A beta-binomial mixed-effects model approach for analysing longitudinal discrete and bounded outcomes

  • Najera-Zuloaga, J.
  • Lee, D.J.
  • Arostegui, I.
Patient-reported outcomes (PROs) are currently being increasingly used as primary outcome measures in observational and experimental studies since they inform clinicians and researchers about the health-status of patients and generate data to facilitate improved care. PROs usually appear as discrete and bounded with U, J or inverse J-shapes and hence, exponential family members offer inadequate distributional fits. The beta-binomial distribution has been proposed in the literature to fit PROs. However, the fact that the beta-binomial distribution does not belong to the exponential family limits its applicability in the regression model context, and classical estimation approaches are not straightforward. Moreover, PROs are usually measured in a longitudinal framework in which individuals are followed up for a certain period. Hence, each individual obtains several scores of the PRO over time, which leads to the repeated-measures and defines the correlation structure in the data. In this work, we have developed and proposed an estimation procedure for the analysis of correlated discrete and bounded outcomes, particularly PROs, by a beta-binomial mixed-effects model. Additionally, we have implemented the methodology in the PROreg package in R. Because there are similar approaches in the literature to address the same issue, this work also incorporates a comparison study between our proposal and alternative methodologies commonly implemented in R and shows the superior performance of our estimation procedure. This paper was motivated by the analysis of the health-status of patients with chronic obstructive pulmonary disease, where the main objective is the assessment of risk factors that may affect the evolution of the disease. The application of the proposed approach in the study leads to clinically relevant results., Department of Education, Language Policy and Culture of the Basque Government IT-620-13 European Regional Development Funds (RD12/0001/0001)- through the thematic networks - REDISSEC (Red de Investigación en Servicios de Salud en Enfermedades Crónicas)
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Hypocoercivity of linear kinetic equations via Harris's Theorem

  • Cañizo, J.A.
  • Cao, C.
  • Evans, J.
  • Yoldas, H.
We study convergence to equilibrium of the linear relaxation Boltzmann (also known as linear BGK) and the linear Boltzmann equations either on the torus $(x,v) \in \mathbb{T}^d \times \mathbb{R}^d$ or on the whole space $(x,v) \in \mathbb{R}^d \times \mathbb{R}^d$ with a confining potential. We present explicit convergence results in total variation or weighted total variation norms (alternatively $L^1$ or weighted $L^1$ norms). The convergence rates are exponential when the equations are posed on the torus, or with a confining potential growing at least quadratically at infinity. Moreover, we give algebraic convergence rates when subquadratic potentials considered. We use a method from the theory of Markov processes known as Harris's Theorem., "la Caixa" Foundation, MTM2014-52056-P, MTM2017-85067- P, EPSRC grant: EP/L016516/1 (under the ERC grant MAFRAN), FSPM Postdoctoral Fellowship: ANR-17-CE40-0030, DIM PhD Fellowship Program.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

International energy agency ocean energy systems task 10 wave energy converter modeling verification and validation

  • Wendt, F.F.
  • Yu, Y.-H.
  • Nielsen, K.
  • Ruehl, K.
  • Bunnik, T.
  • Touzon, I.
  • Nam, B.W.
  • Kim, J.S.
  • Kim, K.-H.
  • Janson, C.E.
  • Jansson, J.
This is the first joint reference paper for the Ocean Energy Systems (OES) Task 10 Wave Energy Converter modeling verification and validation group. The group is established under the OES Energy Technology Network program under the International Energy Agency. OES was founded in 2001 and Task 10 was proposed by Bob Thresher (National Renewable Energy Laboratory) in 2015 and approved by the OES Executive Committee EXCO in 2016. The kickoff workshop took place in September 2016, wherein the initial baseline task was defined. Experience from similar offshore wind validation/verification projects (OC3-OC5 conducted within the International Energy Agency Wind Task 30) [1], [2] showed that a simple test case would help the initial cooperation to present results in a comparable way. A heaving sphere was chosen as the first test case. The team of project participants simulated different numerical experiments, such as heave decay tests and regular and irregular wave cases. The simulation results are presented and discussed in this paper., IEA-OES Task 10
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Some remark on the existence of infinitely many nonphysical solutions to the incompressible Navier-Stokes equations

  • Scrobogna, S.
We prove that there exist infinitely many distributional solutions with infinite kinetic energy to both the incompressible Navier-Stokes equations in $ \mathbb{R}^2 $ and Burgers equation in $\mathbb{R} $ with vanishing initial data.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Shear flow dynamics in the Beris-Edwards model of nematic liquid crystals

  • Murza, A.C.
  • Teruel, A.E.
  • Zarnescu, A.
We consider the Beris-Edwards model describing nematic liquid crystal dynamics and restrict to a shear flow and spatially homogeneous situation. We analyze the dynamics focusing on the effect of the flow. We show that in the co-rotational case one has gradient dynamics, up to a periodic eigenframe rotation, while in the non-co-rotational case we identify the short and long time regime of the dynamics. We express these in terms of the physical variables and compare with the predictions of other models of liquid crystal dynamics.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Robust numerical methods for nonlocal (and local) equations of porous medium type. Part II: Schemes and experiments

  • Del Teso, F.
  • Endal, J.
  • Jacobsen, E.R.
\noindent We develop a unified and easy to use framework to study robust fully discrete numerical methods for nonlinear degenerate diffusion equations $$ \partial_t u-\mathfrak{L}[\varphi(u)]=f(x,t) \qquad\text{in}\qquad \mathbb{R}^N\times(0,T), $$ where $\mathfrak{L}$ is a general symmetric L\'evy type diffusion operator. Included are both local and nonlocal problems with e.g. $\mathfrak{L}=\Delta$ or $\mathfrak{L}=-(-\Delta)^{\frac\alpha2}$, $\alpha\in(0,2)$, and porous medium, fast diffusion, and Stefan type nonlinearities $\varphi$. By robust methods we mean that they converge even for nonsmooth solutions and under very weak assumptions on the data. We show that they are $L^p$-stable for $p\in[1,\infty]$, compact, and convergent in $C([0,T];L_{loc}^p(\mathbb{R}^N))$ for $p\in[1,\infty)$. The first part of this project is given in \cite{DTEnJa18a} and contains the unified and easy to use theoretical framework. This paper is devoted to schemes and testing. We study many different problems and many different concrete discretizations, proving that the results of \cite{DTEnJa18a} apply and testing the schemes numerically. Our examples include fractional diffusions of different orders, and Stefan problems, porous medium, and fast diffusion nonlinearities. Most of the convergence results and many schemes are completely new for nonlocal versions of the equation, including results on high order methods, the powers of the discrete Laplacian method, and discretizations of fast diffusions. Some of the results and schemes are new even for linear and local problems., - Toppforsk (research excellence) project Waves and Nonlinear Phenomena (WaNP), grant no. 250070 from the Research Council of Norway - ERCIM “Alain Bensoussan” Fellowship programme - “Juan de la Cierva - formación” program (FJCI-2016-30148)
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A computational model of open-irrigated radiofrequency catheter ablation accounting for mechanical properties of the cardiac tissue

  • Petras, A.
  • Leoni, M.
  • Guerra Ramos, J.M.
  • Jansson, J.
  • Gerardo-Giorda, L.
Radiofrequency catheter ablation (RFCA) is an effective treatment for cardiac arrhythmias. Although generally safe, it is not completely exempt from the risk of complications. The great flexibility of computational models can be a major asset in optimizing interventional strategies, if they can produce sufficiently precise estimations of the generated lesion for a given ablation protocol. This requires an accurate description of the catheter tip and the cardiac tissue. In particular, the deformation of the tissue under the catheter pressure during the ablation is an important aspect that is overlooked in the existing literature, that resorts to a sharp insertion of the catheter into an undeformed geometry. As the lesion size depends on the power dissipated in the tissue, and the latter depends on the percentage of the electrode surface in contact with the tissue itself, the sharp insertion geometry has the tendency to overestimate the lesion obtained, especially when a larger force is applied to the catheter. In this paper we introduce a full 3D computational model that takes into account the tissue elasticity, and is able to capture the tissue deformation and realistic power dissipation in the tissue. Numerical results in FEniCS-HPC are provided to validate the model against experimental data, and to compare the lesions obtained with the new model and with the classical ones featuring a sharp electrode insertion in the tissue., La Caixa 2016 PhD grant to M. Leoni, and Abbott non-conditional grant to J.M. Guerra Ramos
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Source time reversal (STR) method for linear elasticity

  • Brevis, R.I.
  • Rodríguez-Rozas, A.
  • Ortega, J.H.
  • Pardo, D.
We study the problem of source reconstruction for a linear elasticity problem applied to seismicity induced by mining. We assume the source is written as a variable separable function $\mathbf{f(x)}\>g(t)$ . We first present a simple proof a local decay result for elasticity in the case of homogeneous media. We then extend the source time reversal method, originally developed for acoustic waves, to an elastic system of waves. Additionally, we present a fast reconstruction implementation for large data sets. This is especially useful in the elastic case, in which the numerical cost is higher than in fluid acoustics. We complement this work with several 2D and 3D numerical experiments and an analysis of the results, This work was partially supported by the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant No 644602 GEAGAM (Spain) and CONICYT, Chile - PIA/Concurso de Apoyo a Centros Científicos y Tecnológicos de Excelencia con Financiamiento Basal AFB170001. Additionally, the first author was supported by CONICYT Doctoral fellowship number (Chile), Fondecyt11161033 (Chile), ICMP09-015-F (Chile), and EQM140119. Jaime H. Ortega was partially supported by Fondecyt1111012 and 1171854 (Chile). Ángel Rodríguez-Rozas and David Pardo were partially funded by the Projects of the Spanish Ministry of Economy and Competitiveness with reference MTM2016-76329-R (AEI/FEDER, EU) and MTM2016-81697-ERC/AEI, the BCAM “Severo Ochoa” accreditation of excellence SEV-2017-0718, the Basque Government through the BERC 2018-2021 program, the Consolidated Research Group Grant IT649-13 on “Mathematical Modeling, Simulation, and Industrial Applications (M2SI)”. David Pardo has also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 777778.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Aggregated outputs by linear models: An application on marine litter beaching prediction

  • Hernández-González, J.
  • Inza, I.
  • Granado, I.
  • Basurko, O.C.
  • Fernández, J.A.
  • Lozano, J.A.
In regression, a predictive model which is able to anticipate the output of a new case is learnt from a set of previous examples. The output or response value of these examples used for model training is known. When learning with aggregated outputs, the examples available for model training are individually unlabeled. Collectively, the aggregated outputs of different subsets of training examples are provided. In this paper, we propose an iterative methodology to learn linear models from this type of data. In spite of being simple, its competitive performance is shown in comparison with a straightforward solution and state-of-the-art techniques. A real world problem is also illustrated which naturally fits the aggregated outputs framework: the estimation of marine litter beaching along the south-east coastline of the Bay of Biscay.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

RandomFront 2.3 A physical parametrisation of fire-spotting for operational fire spread models: Implementation in WRF-Sfire and response analysis with LSFire+

  • Trucchia, A.
  • Egorova, V.
  • Butenko, A.
  • Kaur, I.
  • Pagnini, G.
Fire-spotting is often responsible for a dangerous flare up in the wildfire and causes secondary ignitions isolated from the primary fire zone leading to perilous situations. The main aim of the present research to provide a versatile probabilistic model for fire-spotting that is suitable for implementation as a post-processing scheme at each time step in any of the existing operational large-scale wildfire propagation models, without calling for any major changes in the original framework. In particular, a complete physical parametrisation of fire-spotting is presented and the corresponding updated model RandomFront 2.3 is implemented in a coupled fire-atmosphere model : WRF-Sfire. A test case has been simulated and discussed. More- over, the results from different simulations with a simple model based on the Level Set Method, namely LSFire+, highlight the response of the parametrisation to varying fire intensities, wind conditions and different firebrand radii. The contribution of the firebrands towards increasing the fire perimeter varies according to different concurrent conditions and the simulations show results in agreement with the physical processes. Among the many rigorous approaches available in literature to model the firebrand transport and distribution, the approach presented here proves to be simple yet versatile for application to operational large-scale fire spread models., PhD grant "La Caixa 2014"
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A least-squares implicit RBF-FD closest point method and applications to PDEs on moving surfaces

  • Petras, A.
  • Ling, L.
  • Piret, C.
  • Ruuth, S.J.
The closest point method (Ruuth and Merriman, J. Comput. Phys. 227(3):1943-1961, [2008]) is an embedding method developed to solve a variety of partial differential equations (PDEs) on smooth surfaces, using a closest point representation of the surface and standard Cartesian grid methods in the embedding space. Recently, a closest point method with explicit time-stepping was proposed that uses finite differences derived from radial basis functions (RBF-FD). Here, we propose a least-squares implicit formulation of the closest point method to impose the constant-along-normal extension of the solution on the surface into the embedding space. Our proposed method is particularly flexible with respect to the choice of the computational grid in the embedding space. In particular, we may compute over a computational tube that contains problematic nodes. This fact enables us to combine the proposed method with the grid based particle method (Leung and Zhao, J. Comput. Phys. 228(8):2993-3024, [2009]) to obtain a numerical method for approximating PDEs on moving surfaces. We present a number of examples to illustrate the numerical convergence properties of our proposed method. Experiments for advection-diffusion equations and Cahn-Hilliard equations that are strongly coupled to the velocity of the surface are also presented., NSERC Canada Grant (RGPIN 2016-04361), Hong Kong Research Grant Council GRF Grant, Hong Kong Baptist University FRG Grant
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Apparent slip mechanism between two spheres based on solvent rheology: Theory and implication for the shear thinning of non-Brownian suspensions

  • Vazquez-Quesada, A.
  • Español, P.
  • Ellero, M.
Analytical results for the apparent slip between two spheres in a simple biviscous model of a shear thinning fluid are presented. Velocity profiles and apparent slip lengths along the surfaces are analyzed in order to characterize the physical mechanism. It is shown that in this non-Newtonian model, the effect of shear-thinning limited to high-shear rates in the interstitial regions between close spheres can be alternatively interpreted as the onset of an apparent shear-rate dependent slippage effect. The results of the theory compare well with experiments from the literature showing the presence of surface slip on a particle approaching a planar wall. In terms of implications on suspensions rheology, the present results bridge the ’hidden’ solvent shear-thinning theory [A. Va ́zquez-Quesada et al. , Phys. Rev. Lett., 117, 108001-5 (2016)] with slip-based models presented recently in [M. Kroupa et al., Phys. Chem. Chem. Phys. 19, 5979-5984 (2017)] as a possible explanation on the mechanism behind the shear-thinning in hard-sphere non-Brownian suspensions.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Normal lubrication force between spherical particles immersed in a shear-thickening fluid

  • Vazquez-Quesada, A.
  • Wagner, N.J.
  • Ellero, M.
In this work, the inverse bi-viscous model [Physics of Fluids 29, 103104 (2017)] is used to describe a shear-thickening fluid. An analytical velocity profile in a planar Poiseuille flow is utilized to calculate an approximate solution to the generalized lubrication force between two close spheres interacting hydrodynamically in such a medium. This approximate analytical expression is compared to the exact numerical solution.The flow topology of the shear-thickening transition within the interparticle gap is also shown and discussed in relation to the behaviour of the lubrication force. The present result can allow in the future to perform numerical simulations of dense particle suspensions immersed in a shear-thickening matrix based on an effective lubrication force acting between pairwise interacting particles. This model may find additional value in representing experimental systems consisting of suspensions in shear thickening media, polymer coated suspensions, and industrial systems such as concrete.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Atomistic Insight into Ion Transport and Conductivity in Ga/Al-Substituted Li

_7
  • García Daza, F.A.
  • Rincón, M.
  • Llordés, A.
  • Carrasco, J.
  • Akhmatskaya, E.
Garnet-structured Li$_{7}$La$_{3}$Zr$_{2}$O$_{12}$ is a promising solid electrolyte for next-generation solid-state Li batteries. However, sufficiently fast Li-ion mobility required for battery applications only emerges at high temperatures, upon a phase transition to cubic structure. A well-known strategy to stabilize the cubic phase at room temperature relies on aliovalent substitution; in particular, the substitution of Li$^{+}$ by Al$^{3+}$ and Ga$^{3+}$ ions. Yet, despite having the same formal charge, Ga$^{3+}$ substitution yields higher conductivities ($10^{-3}$~S/cm) than Al$^{3+}$ ($10^{-4}$~S/cm). The reason of such difference in ionic conductivity remains a mystery. Here we use molecular dynamic simulations and advanced sampling techniques to precisely unveil the atomistic origin of this phenomenon. Our results show that Li$^{+}$ vacancies generated by Al$^{3+}$ and Ga$^{3+}$ substitution remain adjacent to Ga$^{3+}$ and Al$^{3+}$ ions, without contributing to the promotion of Li$^{+}$ mobility. However, while Ga$^{3+}$ ions tend to allow limited Li$^{+}$ diffusion within their immediate surroundings, the less repulsive interactions associated with Al$^{3+}$ ions lead to a complete blockage of neighboring Li$^{+}$ diffusion paths. This effect is magnified at lower temperatures, and explains the higher conductivities observed for Ga-substituted systems. Overall this study provides a valuable insight into the fundamental ion transport mechanism in the bulk of Ga/Al-substituted Li$_{7}$La$_{3}$Zr$_{2}$O$_{12}$ and paves the way for rationalizing aliovalent substitution design strategies for enhancing ionic transport in these materials., ENE2016-81020-R (MINECO)
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A Global well-posedness result for the Rosensweig system of ferrofluids

  • Scrobogna, S.
  • De Anna, F.
In this Paper we study a Bloch-Torrey regularization of the Rosensweig system for ferrofluids. The scope of this paper is twofold. First of all, we investigate the existence and uniqueness of Leray-Hopf solutions of this model in the whole space $\mathbb{R}^2$. In the second part of this paper we investigate both the long-time behavior of weak solutions and the propagation of Sobolev regularities in dimension two
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Decay of Complex-time Determinantal and Pfaffian\ Correlation Functionals in Lattices

  • Aza, N.J.B.
  • Bru, J.-B.
  • de Siqueira Pedra, W.
We supplement the determinantal and Pfaffian bounds of Sims and Warzel (Commun Math Phys 347:903--931, 2016) for many-body localization of quasi-free fermions, by considering the high dimensional case and complex-time correlations. Our proof uses the analyticity of correlation functions via the Hadamard three-line theorem. We show that the dynamical localization for the one-particle system yields the dynamical localization for the many-point fermionic correlation functions, with respect to the Hausdorff distance in the determinantal case. In Sims and Warzel (2016), a stronger notion of decay for many-particle configurations was used but only at dimension one and for real times. Considering determinantal and Pfaffian correlation functionals for complex times is important in the study of weakly interacting fermions., FAPESP, the CNPq, the Basque Government through the grant IT641-13
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Determination of convection terms and quasi-linearities appearing in diffusion equations

  • Caro, P.
  • Kian, Y.
We consider the highly nonlinear and ill posed inverse problem of determining some general expression appearing in the a diffusion equation from measurements of solutions on the lateral boundary. We consider both linear and nonlinear expression. In the linear case, the equation is a convection-diffusion equation and our inverse problem corresponds to the unique recovery, in some suitable sense, of a time evolving velocity field associated with the moving quantity as well as the density of the medium in some rough setting described by non-smooth coefficients on a Lipschitz domain. In the nonlinear case, we prove the recovery of more general quasilinear expression appearing in a non-linear parabolic equation. Our result give a positive answer to the unique recovery of a general vector valued first order coefficient, depending on both time and space variable, and to the unique recovery inside the domain of quasilinear terms, from measurements restricted to the lateral boundary, for diffusion equations.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Unique determination of the electric potential in the presence of a fixed magnetic potential in the plane

  • Caro, P.
  • Rogers, K.
For electric and magnetic potentials with compact support, we consider the magnetic Schrödinger equation with fixed positive energy. Under a mild additional regularity hypothesis, and with fixed magnetic potential, we show that the scattering solutions uniquely determine the electric potential. For this we develop the method of Bukhgeim for the purely electric Schrödinger equation.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On the influence of gravity on density-dependent incompressible periodic fluids

  • Ngo, V.-S.
  • Scrobogna, S.
The present work is devoted to the analysis of density-dependent, incompressible fluids in a 3D torus, when the Froude number $\varepsilon$ goes to zero. We consider the very general case where the initial data do not have a zero horizontal average, where we only have smoothing effect on the velocity but not on the density and where we can have resonant phenomena on the domain. We explicitly determine the limit system when $\varepsilon \to 0$ and prove its global wellposedness. Finally, we prove that for large initial data, the density-dependent, incompressible fluid system is globally wellposed, provided that $\varepsilon$ is small enough.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Asymptotic models for free boundary flow in porous media

  • Granero-Belinchon, R.
  • Scrobogna, S.
We provide rigorous asymptotic models for the free boundary Darcy and Forchheimer problem under the assumption of weak nonlinear interaction, in a regime in which the steepness parameter of the interface is considered to be very small. The models we derive capture the nonlinear interaction of the original free boundary Darcy and Forchheimer problem up to quadratic terms. Furthermore, we provide models that consider both the two-dimensional and three-dimensional cases, with and without bottom topography.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

How does radiofrequency ablation efficacy depend on the stiffness of the cardiac tissue? Insights from a computational model

  • Petras, A.
  • Leoni, M.
  • Guerra, J.M.
  • Jansson, J.
  • Gerardo-Giorda, L.
Objective. Radiofrequency catheter ablation (RFCA) is an effective treatment for the elimination of cardiac arrhythmias, however it is not exempt from complications that can risk the patients’ life. The efficacy of the RFCA depends on several factors and uncertainties during the treatment process. In this paper, we explore the effect of the cardiac tissue stiffness in RFCA. Methods. We use our previously developed RFCA computational model that accounts for the tissue elasticity. The tissue stiffness is described by the Young’s modulus of elasticity. Results. Our numerical simulations provide insights on the efficacy of the RFCA, by measuring the lesion dimensions over a wide range of values of the modulus of elasticity that appear during the cardiac cycle and for different cardiac conditions, using a fixed ablation protocol, commonly used in clinical practice. Conclusion. The stiffness of the cardiac wall affects the power dissipated in the tissue and, as a consequence, has a marked effect on the dimensions of the generated lesion. The heart wall elasticity changes due the cardiac cycle can affect the resulting lesion and can lead to potentially dangerous complications. Pathological conditions can stiffen the cardiac wall, thus reducing the size of the resulting lesion and potentially leading to insufficient treatment. Significance. A relation of the lesion size dimensions for different tissue stiffness and contact force is presented and correlated to different pathological conditions of the heart, showing the direct relation of the tissue stiffness with the efficacy of the RFCA treatment.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

The excluded volume of two-dimensional convex bodies: shape reconstruction and non-uniqueness

  • Taylor, J.M.
In the Onsager model of one-component hard-particle systems, the entire phase behaviour is dictated by a function of relative orientation, which represents the amount of space excluded to one particle by another at this relative orientation. We term this function the excluded volume function. Within the context of two-dimensional convex bodies, we investigate this excluded volume function for one-component systems addressing two related questions. Firstly, given a body can we find the excluded volume function? Secondly, can we reconstruct a body from its excluded volume function? The former is readily answered via an explicit Fourier series representation, in terms of the support function. However we show the latter question is ill-posed in the sense that solutions are not unique for a large class of bodies. This degeneracy is well characterised however, with two bodies admitting the same excluded volume function if and only if the Fourier coefficients of their support functions differ only in phase. Despite the non-uniqueness issue, we then propose and analyse a method for reconstructing a convex body given its excluded volume function, by means of a discretisation procedure where convex bodies are approximated by zonotopes with a fixed number of sides. It is shown that the algorithm will always asymptotically produce a best least-squares approximation of the trial function, within the space of excluded volume functions of centrally symmetric bodies. In particular, if a solution exists, it can be found. Results from a numerical implementation are presented, showing that with only desktop computing power, good approximations to solutions can be readily found.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Mallows and generalized Mallows model for matchings

  • Irurozki, E.
  • Calvo, B.
  • Lozano, J.A.
The Mallows and Generalized Mallows Models are two of the most popular probability models for distribu- tions on permutations. In this paper, we consider both models under the Hamming distance. This models can be seen as models for matchings instead of models for rankings. These models cannot be factorized, which contrasts with the popular MM and GMM under Kendall’s-τ and Cayley distances. In order to overcome the computational issues that the models involve, we introduce a novel method for computing the partition function. By adapting this method we can compute the expectation, joint and conditional probabilities. All these methods are the basis for three sampling algorithms, which we propose and analyze. Moreover, we also propose a learning algorithm. All the algorithms are analyzed both theoretically and empirically, using synthetic and real data from the context of e-learning and Massive Open Online Courses (MOOC).
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Fire-spotting generated fires. Part I: The role of atmospheric stability

  • Egorova, V.
  • Trucchia, A.
  • Pagnini, G.
This is the first part of two papers concerning fire-spotting generated fires. In this part we deal with the impact of macroscale factors, such as the atmospheric stability, and in the second part we deal with mesoscale factors, such as the flame geometry. For this study we adopt an approach where the motion of the front is split into a drifting part and a fluctuating part. The drifting part, that can be provided by choosing an existing operational model, is here based on the level-set method in analogy with WRF-SFIRE model. The fluctuating part, that is the result of a comprehensive statistical description of the physics of the system and includes the random effects, is here physically parametrized to include turbulent hot-air transport and firebrand landing distance. In order to highlight the net effects of the random contributions due to turbulence and firebrand flying, a simplified model without fire-atmosphere coupling is considered. Numerical simulations show that the atmospheric stability is an important factor for wildfire propagation. In particular, unstable conditions boost the number of fire-spotting generated fires at small elapsed times as well as the strength of turbulence leading to rapid merging and the formation of unburned islands surrounded by the fire. Stability conditions have then an effect on the risk and the management associated to fire-spotting generated fires. In fact, with stable conditions (corresponding for example to the night-time) the turbulence is not strong enough to merge the fires and, at large elapsed times, this results into a higher number of independent fires but lower burned area with respect to unstable conditions (corresponding for example to the day-time) when the push of turbulence leads to faster merging resulting into a lower number of independent fires but higher burned area. Finally, with stable conditions less fire fronts need to be managed at short time, but more fire fronts need to be managed than with unstable conditions that however show a higher risk because of the merging of independent fires., BERC 2014-2017 (Basque Government) BCAM Severo Ochoa excellence accreditation SEV-2013-0323 (Spanish Ministry of Economy and Competitiveness MINECO) Phd Grant "La Caixa 2014" (La Caixa Foundation)
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Boundary Triples for the Dirac Operator with Coulomb-Type Spherically Symmetric Perturbations

  • Cassano, B.
  • Pizzichillo, F.
We determine explicitly a boundary triple for the Dirac operator $H:=-i\alpha\cdot \nabla + m\beta + \mathbb V(x)$ in $\mathbb R^3$, for $m\in\mathbb R$ and $\mathbb V(x)= |x|^{-1} ( \nu \mathbb{I}_4 +\mu \beta -i \lambda \alpha\cdot{x}/|x|\,\beta)$, with $\nu,\mu,\lambda \in \mathbb R$. Consequently we determine all the self-adjoint realizations of $H$ in terms of the behaviour of the functions of their domain in the origin. When $\sup_{x} |x| |\mathbb V(x)| \leq 1$, we discuss the problem of selecting the distinguished extension requiring that its domain is included in the domain of the appropriate quadratic form.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Fractional Brownian motion in a finite interval: correlations effect depletion or accretion zones of particles near boundaries

  • Guggenberger, T.
  • Pagnini, G.
  • Vojta, T.
  • Metzler, R.
Fractional Brownian motion (FBM) is a Gaussian stochastic process with stationary, long-time correlated increments and is frequently used to model anomalous diffusion processes. We study numerically FBM confined to a finite interval with reflecting boundary conditions. The probability density function of this reflected FBM at long times converges to a stationary distribution showing distinct deviations from the fully flat distribution of amplitude 1/L in an interval of length L found for reflected normal Brownian motion. While for superdiffusion, corresponding to a mean squared displacement (MSD) with 1 < α < 2, the probability density function is lowered in the centre of the interval and rises towards the boundaries, for subdiffusion (0 < α < 1) this behaviour is reversed and the particle density is depleted close to the boundaries. The MSD in these cases at long times converges to a stationary value, which is, remarkably, monotonically increasing with the anomalous diffusion exponent α. Our a priori surprising results may have interesting consequences for the application of FBM for processes such as molecule or tracer diffusion in the confines of living biological cells or organelles, or other viscoelastic environments such as dense liquids in microfluidic chambers., ME 1535/6-1 ME 1535/7-1 BERC 2014-2017 SEV-2013-0323 RM acknowledges an Alexander von Humboldt Polish Honorary Research Scholarship from the Polish Science Foundation. We acknowledge the support of Deutsche Forschungsgemeinschaft (German ResearchFoundation) and the Open Access Publication Fund of Potsdam University.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Time-Domain Goal-Oriented Adaptivity Using Pseudo-Dual Error Representations

  • Muñoz-Matute, J.
  • Alberdi, E.
  • Pardo, D.
  • Calo, V.M.
Goal-oriented adaptive algorithms produce optimal grids to solve challenging engineering problems. Recently, a novel error representation using (unconventional) pseudo-dual problems for goal-oriented adaptivity in the context of frequency-domain wave-propagation problems has been developed. In this paper, we extend this error representation to the case of time-domain problems. We express the entire problem in weak form in order to derive the adjoint formulation and apply goal-oriented adaptivity. One dimensional (1D) numerical results show that upper bounds for the new error representation are sharper than the classical ones. Therefore, this new error representation can be used to design more efficient goal-oriented adaptive methodologies.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Finite element approximation of electromagnetic fields using nonfitting meshes for Geophysics

  • Chaumont-Frelet, T.
  • Nicaise, S.
  • Pardo, D.
We analyze the use of nonfitting meshes for simulating the propagation of electromagnetic waves inside the earth with applications to borehole logging. We avoid the use of parameter homogenization and employ standard edge finite element basis functions. For our geophysical applications, we consider a 3D Maxwell’s system with piecewise constant conductivity and globally constant permittivity and permeability. The model is analyzed and discretized using both the Eand H-formulations. Our main contribution is to develop a sharp error estimate for both the electric and magnetic fields. In the presence of singularities, our estimate shows that the magnetic field approximation is converging faster than the electric field approximation. As a result, we conclude that error estimates available in the literature are sharp with respect to the electric field error but provide pessimistic convergence rates for the magnetic field in our geophysical applications. Another surprising consequence of our analysis is that nonfitting meshes deliver the same convergence rate as fitting meshes to approximate the magnetic field. Our theoretical results are numerically illustrated via 2D experiments. For the analyzed cases, the accuracy loss due to the use of nonfitting meshes islimited, even for high conductivity contrasts.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Fast inversion of logging-while-drilling resistivity measurements acquired in multiple wells

  • Bakr, S.A.
  • Pardo, D.
  • Torres-Verdin, C.
This paper introduces a new method for the fast inversion of borehole resistivity measurements acquired in multiple wells using logging-while-drilling (LWD) instruments. There are two key novel contributions. First, we approximate general three-dimensional (3D) transversely isotropic (TI) formations with a sequence of several \stitched" one-dimensional (1D) planarly layered TI sections. This allows us to approximate the solution of rather complex 3D formations using only 1.5D simulations. Second, the developed method supports the simultaneous inversion of measurements acquired in different neighboring wells and/or with different logging instruments. Numerical experiments performed with realistic 3D synthetic formations confirm the flexibility of the method and the reliability of inversion products. The method yields relative errors below 5% on the model space, and it enables the interpretation of resistivity measurements acquired in multiple wells (e.g., an exploratory, an offset, and a geosteering well) and with any combination of co-axial and/or tri-axial commercial logging measurements acquired with known antennae configurations. Numerical results also indicate that thinly-bedded resistive formations are very sensitive to the presence of noise on the measurements and/or to possible errors on bed boundary locations, while conductive layers are only weakly sensitive to those effects.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On initialization of milling paths for 5-axis flank CNC machining of free-form surfaces with general milling tools

  • Bo, P.
  • Barton, M.
We propose a path-planning algorithm for 5-axis flank CNC machining with general tools of varying curvature. Our approach generalizes the initialization strategy introduced for conical tools [Bo et al., 2017] to arbitrary milling tools. Given a free-form (NURBS) surface and a rotational milling tool, we look for its motion in 3D to approximate the input reference surface within a given tolerance. We show that for a general shape of the milling tool, there exist locally and generically four 3D directions in which the point-surface distance follows the shape of the tool up to second order. These directions form a 3D multi-valued vector field and its integration gives rise to a set of integral curves. Among these integral curves, we seek straight line segments that correspond to good initial positions of the axes of the milling tool. We validate our method against synthetic examples with known exact solutions and, on industrial datasets, we detect approximate solutions that meet fine machining tolerances. We also demonstrate applicability of our method for efficient flank milling of convex regions that is not possible using traditional conical tools., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Asymptotic Models for the Electric Potential across a Highly Conductive Casing

  • Erdozain, A.
  • Péron, V.
  • Pardo, D.
We analyze a configuration that involves a steel-cased borehole, where the casing that covers the borehole is considered as a highly conductive thin layer. We develop an asymptotic method for deriving reduced problems capable of efficiently dealing with the numerical difficulties caused by the casing when applying traditional numerical methods. We derive several reduced models by employing two different approaches, each of them leading to different classes of models. We prove stability and convergence results for these models. The theoretical orders of convergence are supported by numerical results obtained with the finite element method.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Parallel refined Isogeometric Analysis in 3D

  • Siwik, L.
  • Wozniak, M.
  • Trujillo, V.
  • Pardo, D.
  • Calo, V.M.
  • Paszynski, M.
We study three-dimensional isogeometric analysis (IGA) and the solution of the resulting system of linear equations via a direct solver. IGA uses highly continuous $C^{p-1}$ basis functions, which provide multiple benefits in terms of stability and convergence properties. However, smooth basis significantly deteriorate the direct solver performance and its parallel scalability. As a partial remedy for this, refined Isogeometric Analysis (rIGA) method improves the sequential execution of direct solvers. The refinement strategy enriches traditional highly-continuous $C^{p-1}$ IGA spaces by introducing low-continuity $C^{0}$ 0-hyperplanes along the boundaries of certain pre-defined macro-elements. In this work, propose a solution strategy for rIGA for parallel distributed memory machines and compare the computational costs of solving rIGA vs IGA discretizations. We verify our estimates with parallel numerical experiments. Results show that the weak parallel scalability of the direct solver improves approximately by a factor of $p^{2}$ when considering rIGA discretizations rather than highly-continuous IGA spaces.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A C0 interior penalty discontinuous Galerkin method for fourth‐order total variation flow I: Derivation of the method and numerical results

  • Kumar, R.
  • Hoppe, R.H.W.
  • Bhandari, C.
We consider the numerical solution of a fourth‐order total variation flow problem representing surface relaxation below the roughening temperature. Based on a regularization and scaling of the nonlinear fourth‐order parabolic equation, we perform an implicit discretization in time and a C0 Interior Penalty Discontinuous Galerkin (C0IPDG) discretization in space. The C0IPDG approximation can be derived from a mixed formulation involving numerical flux functions where an appropriate choice of the flux functions allows to eliminate the discrete dual variable. The fully discrete problem can be interpreted as a parameter dependent nonlinear system with the discrete time as a parameter. It is solved by a predictor corrector continuation strategy featuring an adaptive choice of the time step sizes. A documentation of numerical results is provided illustrating the performance of the C0IPDG method and the predictor corrector continuation strategy. The existence and uniqueness of a solution of the C0IPDG method will be shown in the second part of this paper.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Order Reconstruction for neatics on squares with isotropic inclusions: A Landau-de Gennes study

  • Wang, Y.
  • Canevari, G.
  • Majumdar, A.
e study a modified Landau-de Gennes model for nematic liq- uid crystals, where the elastic term is assumed to be of subquadratic growth in the gradient. We analyze the behaviour of global minimizers in two- and three-dimensional domains, subject to uniaxial boundary conditions, in the asymptotic regime where the length scale of the defect cores is small com- pared to the length scale of the domain. We obtain uniform convergence of the minimizers and of their gradients, away from the singularities of the limiting uniaxial map. We also demonstrate the presence of maximally biaxial cores in minimizers on two-dimensional domains, when the temperature is sufficiently low.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Topological singular set of vector-valued maps, I: application to manifold-constrained Sobolev and BV spaces

  • Canevari, G.
  • Orlandi, G.
We introduce an operator $\mathbf{S}$ on vector-valued maps $u$ which has the ability to capture the relevant topological information carried by $u$. In particular, this operator is defined on maps that take values in a closed submanifold $\mathcal{N}$ of the Euclidean space $\mathbb{R}^m$, and coincides with the distributional Jacobian in case $\mathcal{N}$ is a sphere. More precisely, the range of $\mathbf{S}$ is a set of maps whose values are flat chains with coefficients in a suitable normed abelian group. In this paper, we use $\mathbf{S}$ to characterise strong limits of smooth, $\mathcal{N}$-valued maps with respect to Sobolev norms, extending a result by Pakzad and Rivière. We also discuss applications to the study of manifold-valued maps of bounded variation. In a companion paper, we will consider applications to the asymptotic behaviour of minimisers of Ginzburg-Landau type functionals, with $\mathcal{N}$-well potentials.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On Lipschitz rigidity of complex analytic sets

  • Fernandes, A.
  • Sampaio, J.E.
We prove that any complex analytic set in $\mathbb{C}^n$ which is Lipschitz normally embedded at infinity and has tangent cone at infinity that is a linear subspace of $\mathbb{C}^n$ must be an affine linear subspace of $\mathbb{C}^n$ itself. No restrictions on the singular set, dimension nor codimension are required. In particular, any complex algebraic set in $\mathbb{C}^n$ which is Lipschitz regular at infinity is an affine linear subspace., The first named author was partially supported by CNPq-Brazil grant 302764/2014-7
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Improved fractional Poincaré type inequalities in John domains

  • Cejas, M.E.
  • Drelichman, I.
  • Martinez-Perales, J.C.
We obtain improved fractional Poincaré inequalities in John domains of a metric space $(X, d)$ endowed with a doubling measure $\mu$ under some mild regularity conditions on the measure $\mu$. We also give sufficient conditions on a bounded domain to support fractional Poincaré type inequalities in this setting., Universidad Nacional de La Plata, under grant 11/X805 Universidad de Buenos Aires, under grant 20020120100050BA Agencia Nacional de Promoción Científica y Tecnológica, under grant PICT 2014-1771
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Modified Hamiltonian Monte Carlo for Bayesian Inference

  • Radivojevic, T.
  • Akhmatskaya, E.
The Hamiltonian Monte Carlo (HMC) method has been recognized as a powerful sampling tool in computational statistics. We show that performance of HMC can be significantly improved by incorporating importance sampling and an irreversible part of the dynamics into a chain. This is achieved by replacing Hamiltonians in the Metropolis test with modified Hamiltonians, and a complete momentum update with a partial momentum refreshment. We call the resulting generalized HMC importance sampler—Mix & Match Hamiltonian Monte Carlo (MMHMC). The method is irreversible by construction and further benefits from (i) the efficient algorithms for computation of modified Hamiltonians; (ii) the implicit momentum update procedure and (iii) the multi-stage splitting integrators specially derived for the methods sampling with modified Hamiltonians. MMHMC has been implemented, tested on the popular statistical models and compared in sampling efficiency with HMC, Riemann Manifold Hamiltonian Monte Carlo, Generalized Hybrid Monte Carlo, Generalized Shadow Hybrid Monte Carlo, Metropolis Adjusted Langevin Algorithm and Random Walk Metropolis-Hastings. To make a fair comparison, we propose a metric that accounts for correlations among samples and weights, and can be readily used for all methods which generate such samples. The experiments reveal the superiority of MMHMC over popular sampling techniques, especially in solving high dimensional problems., Agile BioFoundry (http://agilebiofoundry.org) supported by the U.S. Department of Energy, Energy Efficiency and Renewable Energy, Bioenergy Technologies Office, through contract DE-AC02-05CH11231 between Lawrence Berkeley National Laboratory and the U.S. Department of Energy.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On the propagation of nonlinear transients of temperature and pore pressure in a thin porous boundary layer between two rocks.

  • Salusti, E.
  • Kanivetsky, R.
  • Droghei, R.
  • Garra, R.
The dynamics of transients of fluid-rock temperature, pore pressure, pollutants in porous rocks are of vivid interest for fundamental problems in hydrological, volcanic, hydrocarbon systems, deep oil drilling. This can concern rapid landslides or the fault weakening during coseismic slips and also a new field of research about stability of classical buildings. Here we analyze the transient evolution of temperature and pressure in a thin boundary layer between two adjacent homogeneous media for various types of rocks. In previous models, this boundary was often assumed to be a sharp mathematical plane. Here we consider a non-sharp, physical boundary between two adjacent rocks, where also local steady pore pressure and/or temperature fields are present. To obtain a more reliable model we also investigate the role of nonlinear effects as convection and fluid-rock “frictions”, often disregarded in early models: these nonlinear effects in some cases can give remarkable quick and sharp transients. All of this implies a novel model, whose solutions describe large, sharp and quick fronts. We also rapidly describe transients moving through a particularly irregular boundary layer.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Analyzing rare event, anomaly, novelty and outlier detection terms under the supervised classification framework

  • Carreño, A.
  • Inza, I.
  • Lozano, J.A.
In recent years, a variety of research areas have contributed to a set of related problems with rare event, anomaly, novelty and outlier detection terms as the main actors. These multiple research areas have created a mix-up between terminology and problems. In some research, similar problems have been named differently; while in some other works, the same term has been used to describe different problems. This confusion between terms and problems causes the repetition of research and hinders the advance of the field. Therefore, a standardization is imperative. The goal of this paper is to underline the differences between each term, and organize the area by looking at all these terms under the umbrella of supervised classification. Therefore, a one-to-one assignment of terms to learning scenarios is proposed. In fact, each learning scenario is associated with the term most frequently used in the literature. In order to validate this proposal, a set of experiments retrieving papers from Google Scholar, ACM Digital Library and IEEE Xplore has been carried out.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

An evolutionary discretized Lambert approach for optimal long-range rendezvous considering impulse limit

  • Shirazi, A.
  • Ceberio, J.
  • Lozano, J.A.
In this paper, an approach is presented for finding the optimal long-range space rendezvous in terms of fuel and time, considering limited impulse. In this approach , the Lambert problem is expanded towards a discretized multi-impulse transfer. Taking advantage of an analytical form of multi-impulse transfer, a feasible solution that satisfies the impulse limit is calculated. Next, the obtained feasible solution is utilized as a seed for generating individuals for a hybrid self-adaptive evolutionary algorithm to minimize the total time, without violating the impulse limit while keeping the overall fuel mass the same as or less than the one associated with the analytical solution. The algorithm eliminates similar individuals and regenerates them based on a combination of Gaussian and uniform distribution of solutions from the fuel-optimal region during the optimization process. Other enhancements are also applied to the algorithm to make it auto-tuned and robust to the initial and final orbits as well as the impulse limit. Several types of the proposed algorithm are tested considering varieties of rendezvous missions. Results reveal that the approach can successfully reduce the overall transfer time in the multi-impulse transfers while minimizing the fuel mass without violating the impulse limit. Furthermore, the proposed algorithm has superior performance over standard evolutionary algorithms in terms of convergence and optimality., TIN2016-78365R
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A Bilinear Strategy for Calderón's Problem

  • Ponce Vanegas, F.
Electrical Impedance Imaging would suffer a serious obstruction if for two different conductivities the potential and current measured at the boundary were the same. The Calder\'on's problem is to decide whether the conductivity is indeed uniquely determined by the data at the boundary. In $\mathbb{R}^d$, for $d=5,6$, we show that uniqueness holds when the conductivity is in $W^{1+\frac{d-5}{2p}+,p}(\Omega)$, for $d\le p<\infty$. This improves on recent results of Haberman, and of Ham, Kwon and Lee. The main novelty of the proof is an extension of Tao's bilinear Theorem.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Reconstruction of the Derivative of the Conductivity at the Boundary

  • Ponce Vanegas, F.
We describe a method to reconstruct the conductivity and its normal derivative at the boundary from the knowledge of the potential and current measured at the boundary. This boundary determination implies the uniqueness of the conductivity in the bulk when it lies in $W^{1+\frac{n-5}{2p}+,p}$, for dimensions $n\ge 5$ and for $n\le p<\infty$.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Metastable resting state brain dynamics

  • beim Graben, P.
  • Jimenez-Marin, A.
  • Diez, I.
  • Cortes, J.M.
  • Desroches, M.
  • Rodrigues, S.
Metastability refers to the fact that the state of a dynamical system spends a large amount of time in a restricted region of its available phase space before a transition takes place, bringing the system into another state from where it might recur into the previous one. Beim Graben and Hutt suggested to use the recurrence plot (RP) technique introduced by Eckmann et al. for the segmentation of system’s trajectories into metastable states using recurrence grammars. Here, we apply this recurrence structure analysis (RSA) for the first time to resting-state brain dynamics obtained from functional magnetic resonance imaging (fMRI). Brain regions are defined according to the brain hierarchical atlas (BHA) developed by Diez et al., and as a consequence, regions present high-connectivity in both structure (obtained from diffusion tensor imaging) and function (from the blood-level dependent-oxygenation —BOLD— signal). Remarkably, regions observed by Diez et al. were completely time-invariant. Here, in order to compare this static picture with the metastable systems dynamics obtained from the RSA segmentation, we determine the number of metastable states as a measure of complexity for all subjects and for region numbers varying from 3 to 100. We find RSA convergence towards an optimal segmentation of 40 metastable states for normalized BOLD signals, averaged over BHA modules. Next, we build a bistable dynamics at population level by pooling 30 subjects after Hausdorff clustering. In link with this finding, we reflect on the different modeling frameworks that can allow for such scenarios: heteroclinic dynamics, dynamics with riddled basins of attraction, multiple-timescale dynamics. Finally, we characterize the metastable states both functionally and structurally, using templates for resting state networks (RSNs) and the automated anatomical labeling (AAL) atlas, respectively., Ikerbasque, FEDER grant DPI2016-79874-R, Elkartek Program KK-2018/00032
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A roadmap to integrate astrocytes into Systems Neuroscience

  • Kastanenka Ksenia, V.
  • Poskanzer Kira, E.
  • Galea, E.
  • Moreno-Bote, R.
  • De Pittà, M.
  • Perea, G.
  • Eraso-Pichot, A.
  • Masgrau, R.
Systems Neuroscience is still mainly a neuronal field, despite the plethora of evidence supporting the fact that astrocytes modulate local neural circuits, networks, and complex behaviors. In this article, we sought to identify which types of studies are necessary to establish whether astrocytes, beyond their well-documented homeostatic and metabolic functions, perform computations implementing mathematical algorithms that sub-serve coding and higher-brain functions. First, we reviewed Systems-like studies that include astrocytes in order to identify computational operations that these cells may perform, using Ca$^{2+}$ transients as their encoding language. The analysis suggests that astrocytes may carry out canonical computations in time scales of sub-seconds to seconds in sensory processing, neuromodulation, brain state, memory formation, fear, and complex homeostatic reflexes. Next, we propose a list of actions to gain insight into the outstanding question of which variables are encoded by such computations. The application of statistical analyses based on machine learning, such as dimensionality reduction and decoding in the context of complex behaviors, combined with connectomics of astrocyte-neuronal circuits, are, in our view, fundamental undertakings. We also discuss technical and analytical approaches to study neuronal and astrocytic populations simultaneously, and the inclusion of astrocytes in advanced modeling of neural circuits, as well as in theories currently under exploration, such as predictive coding and energy-efficient coding. Clarifying the relationship between astrocytic Ca$^{2+}$ and brain coding may represent a leap forward towards novel approaches in the study of astrocytes in health and disease., Junior Leader Fellowhip Program by 'la Caixa' Banking Foundation, LCF/BQ/LI18/11630006 BFU2017-85936-P BFU2016-75107-P BFU2016-79735-P FLAGERA-PCIN-2015-162-C02-02 HHMI 55008742 FPU13/05377 NIH R01NS099254 NSF 1604544 Agència de Gestio d’Ajuts Universitaris i de Recerca, 2017 SGR547
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Minimizers of a Landau-de Gennes energy with a subquadratic elastic energy

  • Canevari, G.
  • Majumdar, A.
  • Stroffolini, B.
We study a modified Landau-de Gennes model for nematic liq- uid crystals, where the elastic term is assumed to be of subquadratic growth in the gradient. We analyze the behaviour of global minimizers in two- and three-dimensional domains, subject to uniaxial boundary conditions, in the asymptotic regime where the length scale of the defect cores is small com- pared to the length scale of the domain. We obtain uniform convergence of the minimizers and of their gradients, away from the singularities of the limiting uniaxial map. We also demonstrate the presence of maximally biaxial cores in minimizers on two-dimensional domains, when the temperature is sufficiently low.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Clinical correlates of mathematical modeling of cortical spreading depression: Single‐cases study

  • Kroos, J.M.
  • de Tommaso, M.
  • Stramaglia, S.
  • Vecchio, E.
  • Burdi, N.
  • Gerardo-Giorda, L.
Introduction: Considerable connections between migraine with aura and cortical spreading depression (CSD), a depolarization wave originating in the visual cortex and traveling toward the frontal lobe, lead to the hypothesis that CSD is underlying migraine aura. The highly individual and complex characteristics of the brain cor‐ tex suggest that the geometry might impact the propagation of cortical spreading depression. Methods: In a single‐case study, we simulated the CSD propagation for five migraine with aura patients, matching their symptoms during a migraine attack to the CSD wavefront propagation. This CSD wavefront was simulated on a patient‐specific tri‐ angulated cortical mesh obtained from individual MRI imaging and personalized dif‐ fusivity tensors derived locally from diffusion tensor imaging data. Results: The CSD wave propagation was simulated on both hemispheres, despite in all but one patient the symptoms were attributable to one hemisphere. The CSD wave diffused with a large wavefront toward somatosensory and prefrontal regions, devoted to pain processing. Discussion: This case‐control study suggests that the cortical geometry may con‐ tribute to the modality of CSD evolution and partly to clinical expression of aura symptoms. The simulated CSD is a large and diffuse phenomenon, possibly capa‐ ble to activate trigeminal nociceptors and to involve cortical areas devoted to pain processing.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Robust combination of the Morris and Sobol methods in complex multidimensional models

  • Garcia, D.
  • Arostegui, I.
  • Prellezo, R.
Conducting global sensitivity analysis using variance decomposition methods in complex simulation models with many input factors is usually unaffordable. An alternative is to first apply a screening method to reduce the number of input factors and then apply a variance decomposition method to the reduced model. However, usually selection of input factors is not done robustly and convergence of the screening method is not ensured. We propose two new criteria, a criterion that mimics the visual selection of the input factors and a convergence criterion. In the application of the criteria to a complex model, the Morris screening method has needed 200 trajectories to converge and the visual criterion has outperformed other existing criteria. Our proposal ensures a robust combination of the Morris and the Sobol methods that provides an objective and automatic method to select the most important input factors with a feasible computing load to achieve convergence., Basque Government IT1294-19 MTM2016-74931-P
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Soft information for localization-of-things

  • Conti, A.
  • Mazuelas, S.
  • Bartoletti, S.
  • Lindsey, W.C
  • Win, M.
Location awareness is vital for emerging Internetof- Things applications and opens a new era for Localizationof- Things. This paper first reviews the classical localization techniques based on single-value metrics, such as range and angle estimates, and on fixed measurement models, such as Gaussian distributions with mean equal to the true value of the metric. Then, it presents a new localization approach based on soft information (SI) extracted from intra- and inter-node measurements, as well as from contextual data. In particular, efficient techniques for learning and fusing different kinds of SI are described. Case studies are presented for two scenarios in which sensing measurements are based on: 1) noisy features and non-line-of-sight detector outputs and 2) IEEE 802.15.4a standard. The results show that SI-based localization is highly efficient, can significantly outperform classical techniques, and provides robustness to harsh propagation conditions., RYC-2016-19383
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Front Propagation in Random Media

  • Trucchia, A.
This PhD thesis deals with the problem of the propagation of fronts under random circumstances. A statistical model to represent the motion of fronts when are evolving in a media characterized by microscopical randomness is discussed and expanded, in order to cope with three distinct applications: wild-land fire simulation, turbulent premixed combustion, biofilm modeling. In the studied formalism, the position of the average front is computed by making use of a sharp-front evolution method, such as the level set method. The microscopical spread of particles which takes place around the average front is given by the probability density function linked to the underlying diffusive process, that is supposedly known in advance. The adopted statistical front propagation framework allowed a deeper understanding of any studied field of application. The application of this model introduced eventually parameters whose impact on the physical observables of the front spread have been studied with Uncertainty Quantification and Sensitivity Analysis tools. In particular, metamodels for the front propagation system have been constructed in a non intrusive way, by making use of generalized Polynomial Chaos expansions and Gaussian Processes., The Thesis received funding from Basque Government through the BERC 2014-2017 program. It was also funded by the Spanish Ministry of Economy and Competitiveness MINECO via the BCAM Severo Ochoa SEV-2013-0323 accreditation. The PhD is fundend by La Caixa Foundation through the PhD grant “La Caixa 2014”. Funding from “Programma Operativo Nazionale Ricerca e Innovazione” (PONRI 2014-2020) , “Innotavive PhDs with Industrial Characterization” is kindly acknowledged for a research visit at the department of Mathematics and Applications “Renato Caccioppoli” of University “Federico II” of Naples.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Equilibrium and Transport Properties of Quantum Many-Body Systems

  • Ratsimanetrimanana, A.
This thesis is a study of equilibrium and dynamical properties of macroscopic quantum many-body problems. An important part of the manuscript concerns the study of heat and charge transport properties of fermions on the lattice. This refers to the derivation, from first principles of quantum mechanics and thermodynamics, of the Ohm’s law, first published in 1827 by G. S. Ohm, and of the heat equation, the well-known (classical) equation introduced by J. Fourier in 1807. A complete derivation of the heat equation from quantum mechanics is still not achieved, but we prove here some preliminary results on this non-trivial issue. By contrast, the study of charge transport properties of fermion systems on the lattice is largely developed in this thesis. In particular, we give a mathematical justification, for non-interacting free-fermions, of recent experiments (in 2006 and 2012) which have shown that the classical Ohm's law remains valid as atomic scales are reached even at very low temperature. Equilibrium state refers here to the notion of KMS state. We also set that the classical KMS condition can be derived from the (quantum) KMS condition for the so-called Bose-Hubbard model.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Meta-modeling on detailed geography for accurate prediction of invasive alien species dispersal

  • Pepper, N.
  • Gerardo-Giorda, L.
  • Montomoli, F.
Invasive species are recognized as a significant threat to biodiversity. The mathematical modeling of their spatio-temporal dynamics can provide significant help to environmental managers in devising suitable control strategies. Several mathematical approaches have been proposed in recent decades to efficiently model the dispersal of invasive species. Relying on the assumption that the dispersal of an individual is random, but the density of individuals at the scale of the population can be considered smooth, reaction-diffusion models are a good trade-off between model complexity and flexibility for use in different situations. In this paper we present a continuous reaction-diffusion model coupled with arbitrary Polynomial Chaos (aPC) to assess the impact of uncertainties in the model parameters. We show how the finite elements framework is well-suited to handle important landscape heterogeneities as elevation and the complex geometries associated with the boundaries of an actual geographical region. We demonstrate the main capabilities of the proposed coupled model by assessing the uncertainties in the invasion of an alien species invading the Basque Country region in Northern Spain., ESPRC and Airbus iCASE (voucher 17000099)
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Efficient mass and stiffness matrix assembly via weighted Gaussian quadrature rules for B-splines

  • Barton, M.
  • Puzyrev, V.
  • Deng, Q.
  • Calo, V.M.
Calabr{\`o} et al. [10] changed the paradigm of the mass and stiffness computation from the traditional element-wise assembly to a row-wise concept, showing that the latter one offers integration that may be orders of magnitude faster. Considering a B-spline basis function as a non-negative measure, each mass matrix row is integrated by its own quadrature rule with respect to that measure. Each rule is easy to compute as it leads to a linear system of equations, however, the quadrature rules are of the Newton-Cotes type, that is, they require a number of quadrature points that is equal to the dimension of the spline space. In this work, we propose weighted quadrature rules of Gaussian type which require the minimum number of quadrature points while guaranteeing exactness of integration with respect to the weight function. The weighted Gaussian rules arise as solutions of non-linear systems of equations. We derive rules for the mass and stiffness matrices for uniform $C^1$ quadratic and $C^2$ cubic isogeometric discretizations. In each parameter direction, our rules require locally only $p+1$ quadrature points, $p$ being the polynomial degree. While the nodes cannot be reused for various weight functions as in [10], the computational cost of the mass and stiffness matrix assembly is comparable., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Refined Isogeometric Analysis for fluid mechanics and electromagnetism

  • Garcia, D.
  • Pardo, D.
  • Calo, V.M.
Starting from a highly continuous isogeometric analysis discretization, we introduce hyperplanes that partition the domain into subdomains and reduce the continuity of the discretization spaces at these hyperplanes. As the continuity is reduced, the number of degrees of freedom in the system grows. The resulting discretization spaces are finer than standard maximal continuity IGA spaces. Despite the increase in the number of degrees of freedom, these finer spaces deliver simulation results faster with direct solvers than both traditional finite element and isogeometric analysis for meshes with a fixed number of elements. In this work, we analyze the impact of continuity reduction on the number of Floating Point Operations (FLOPs) and computational times required to solve fluid flow and electromagnetic problems with structured meshes and uniform polynomial orders. Theoretical estimates show that for sufficiently large grids, an optimal continuity reduction decreases the computational cost by a factor of . Numerical results confirm these theoretical estimates. In a 2D mesh with one million elements and polynomial order equal to five, the discretization including an optimal continuity pattern allows to solve the vector electric field, the scalar magnetic field, and the fluid flow problems an order of magnitude faster than when using a highly continuous IGA discretization. 3D numerical results exhibit more moderate savings due to the limited mesh sizes considered in this work.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Models for damped water waves

  • Granero-Belinchon, R.
  • Scrobogna, S.
In this paper we derive some new weakly nonlinear asymptotic models describing viscous waves in deep water with or without surface tension effects. These asymptotic models take into account several different dissipative effects and are obtained from the free bound- ary problems formulated in the works of Dias, Dyachenko and Zakharov (Physics Letters A, 2008 ), Jiang, Ting, Perlin and Schultz (Journal of Fluid Mechanics,1996 ) and Wu, Liu and Yue (Journal of Fluid Mechanics, 2006 ).
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Some geometric properties of Riemann’s non-differentiable function

  • Eceizabarrena, D.
Riemann’s non-differentiable function is a celebrated example of a continuous but almost nowhere differentiable function. There is strong numeric evidence that one of its complex versions represents a geometric trajectory in experiments related to the binormal flow or the vortex filament equation. In this setting, we analyse certain geometric properties of its image in C. The objective of this note is to assert that the Hausdorff dimension of its image is no larger than $4/3$ and that it has nowhere a tangent., FPU15/03078 - Ministerio de Educación, Cultura y Deporte,
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

An optimal scaling to computationally tractable dimensionless models: Study of latex particles morphology formation

  • Rusconi, S.
  • Dutykh, D.
  • Zarnescu, A.
  • Sokolovski, D.
  • Akhmatskaya, E.
In modelling of chemical, physical or biological systems it may occur that the coefficients, multiplying various terms in the equation of interest, differ greatly in magnitude, if a particular system of units is used. Such is, for instance, the case of the Population Balance Equations (PBE) proposed to model the Latex Particles Morphology formation. The obvious way out of this difficulty is the use of dimensionless scaled quantities, although often the scaling procedure is not unique. In this paper, we introduce a conceptually new general approach, called Optimal Scaling (OS). The method is tested on the known examples from classical and quantum mechanics, and applied to the Latex Particles Morphology model, where it allows us to reduce the variation of the relevant coefficients from 49 to just 4 orders of magnitudes. The PBE are then solved by a novel Generalised Method Of Characteristics, and the OS is shown to help reduce numerical error, and avoid unphysical behaviour of the solution. Although inspired by a particular application, the proposed scaling algorithm is expected find application in a wide range of chemical, physical and biological problems.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Quantitative weighted estimates for Rubio de Francia's Littlewood--Paley square function

  • Garg, R.
  • Roncal, L.
  • Shrivastava, S.
We consider the Rubio de Francia's Littlewood--Paley square function associated with an arbitrary family of intervals in $\mathbb{R}$ with finite overlapping. Quantitative weighted estimates are obtained for this operator. The linear dependence on the characteristic of the weight $[w]_{A_{p/2}}$ turns out to be sharp for $3\le p<\infty$, whereas the sharpness in the range $2<p<3$ remains as an open question. Weighted weak-type estimates in the endpoint $p=2$ are also provided. The results arise as a consequence of a sparse domination shown for these operators, obtained by suitably adapting the ideas coming from Benea [2015] and Culiuc et al. [2018]., 2017 Leonardo grant for Researchers and Cultural Creators, BBVA Foundation
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Moderately Discontinuous Algebraic Topology for Metric Subanalytic Germs

  • Heinze, S.
We have developed both a homology theory and a homotopy theory in the context of metric subanalytic germs (see Definition 2.1). The former is called MD homology and is covered in Chapter 2, which contains a paper that is joined work with my PhD advisors Javier Fernández de Bobadilla and María Pe Pereira and with Edson Sam- paio. The latter is called MD homotopy and is covered in Chapter 3. Both theories are functors from a category of germs of metric subanalytic spaces (resp. germs of metric subanalytic spaces that are punctured in a way that will be defined) to a cat- egory of commutative diagrams of groups. For the concrete definition of the domain categories see Definition 2.10 and Definition 3.47 respectively; for the target categories see Definition 2.42 and Definition 3.52 respectively. Similarly to classical homology and homotopy theories, the groups appearing in the target category are abelian in the homology theory for any degree and in the homotopy theory for degree n > 1.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Functional Geometry of Human Connectomes

  • Tadic, B.
  • Andjelkovic, M.
  • Melnik, R.
Mapping the brain imaging data to networks, where nodes represent anatomical brain regions and edges indicate the occurrence of fiber tracts between them, has enabled an objective graph-theoretic analysis of human connectomes. However, the latent structure on higher-order interactions remains unexplored, where many brain regions act in synergy to perform complex functions. Here we use the simplicial complexes description of human connectome, where the shared simplexes encode higher-order relationships between groups of nodes. We study consensus connectome of 100 female (F-connectome) and of 100 male (M-connectome) subjects that we generated from the Budapest Reference Connectome Server v3.0 based on data from the Human Connectome Project. Our analysis reveals that the functional geometry of the common F&M-connectome coincides with the M-connectome and is characterized by a complex architecture of simplexes to the 14th order, which is built in six anatomical communities, and linked by short cycles. The F-connectome has additional edges that involve different brain regions, thereby increasing the size of simplexes and introducing new cycles. Both connectomes contain characteristic subjacent graphs that make them 3/2-hyperbolic. These results shed new light on the functional architecture of the brain, suggesting that insightful differences among connectomes are hidden in their higher-order connectivity.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Coupled thermo-electro-mechanical models for thermal ablation of biological tissues and heat relaxation time effects

  • Singh, S.
  • Melnik, R.
Thermal ablation is a widely applied electrosurgical process in medical treatment of soft biological tissues. Numerical modeling and simulations play an important role in prediction of temperature distribution and damage volume during the treatment planning stage of associated therapies. In this contribution we report a coupled thermo-electro-mechanical model, accounting for heat relaxation time, for more accurate and precise prediction of the temperature distribution, tissue deformation and damage volume during the thermal ablation of biological tissues. Finite element solutions are obtained for most widely used percutaneous thermal ablative techniques, viz., radiofrequency ablation (RFA) and microwave ablation (MWA). Importantly, both tissue expansion and shrinkage have been considered for modeling the tissue deformation in the coupled model of high temperature thermal ablation. The coupled model takes into account the non-Fourier effects, considering both single-phase lag (SPL) and dual-phase-lag (DPL) models of bio-heat transfer. The temperature-dependent electrical and thermal parameters, damage-dependent blood perfusion rate and phase change effect accounting for tissue vaporization have been accounted for obtaining more clinically relevant model. The proposed model predictions are found to be in good agreement against the temperature distribution and damage volume reported by previous experimental studies. The numerical simulation results revealed that the non-Fourier effects cause a decrease in the predicted temperature distribution, tissue deformation and damage volume during the high temperature thermal ablative procedures. Furthermore, the effects of different magnitudes of phase lags of the heat flux and temperature gradient on the predicted treatment outcomes of the considered thermal ablative modalities are also quantified and discussed in detail.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Spectral properties of hyperbolic nano-networks with tunable aggregation of simplexes

  • Dankulov, M.M.
  • Tadic, B.
  • Melnik, R.
Cooperative self-assembly is a ubiquitous phenomenon found in natural systems which is used for designing nanostructured materials with new functional features. Its origin and mechanisms, leading to improved functionality of the assembly, have attracted much attention from researchers in many branches of science and engineering. These complex structures often come with hyperbolic geometry; however, the relation between the hyperbolicity and their spectral and dynamical properties remains unclear. Using the model of aggregation of simplexes introduced by Suvakov et al. [Sci. Rep. 8, 1987 (2018)], here we study topological and spectral properties of a large class of self-assembled structures or nanonetworks consisting of monodisperse building blocks (cliques of size n = 3, 4, 5, 6) which self-assemble via sharing the geometrical shapes of a lower order. The size of the shared substructure is tuned by varying the chemical affinity nu such that for significant positive nu sharing the largest face is the most probable, while for nu < 0, attaching via a single node dominates. Our results reveal that, while the parameter of hyperbolicity remains delta(max) = 1 across the assemblies, their structure and spectral dimension d(s) vary with the size of cliques n and the affinity when nu < 0. In this range, we find that d(s) > 4 can be reached for n 5 and sufficiently large nu. For the aggregates of triangles and tetrahedra, the spectral dimension remains in the range d(s) is an element of [2, 4), as well as for the higher cliques at vanishing affinity. On the other end, for nu < 0, we find d(s) similar or equal to 1.57 independently on n. Moreover, the spectral distribution of the normalized Laplacian eigenvalues has a characteristic shape with peaks and a pronounced minimum, representing the hierarchical architecture of the simplicial complexes. These findings show how the structures compatible with complex dynamical properties can be assembled by controlling the higher-order connectivity among the building blocks.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Parametric Vibration Analysis of Pipes Conveying Fluid by Nonlinear Normal Modes and a Numerical Iterative Approach

  • Liang, F.
  • Yang XD
  • Zhang, W.
  • Qian, Y.J.
  • Melnik, R.
Nonlinear normal modes and a numerical iterative approach are applied to study the parametric vibrations of pipes conveying pulsating fluid as an example of gyroscopic continua. The nonlinear non-autonomous governing equations are transformed into a set of pseudo-autonomous ones by employing the harmonic balance method. The nonlinear normal modes are constructed by the invariant manifold method on the state space and a numerical iterative approach is adopted to obtain numerical solutions, in which two types of initial conditions for the modal coefficients are employed. The results show that both initial conditions can lead to fast convergence. The frequency-amplitude responses with some modal motions in phase space are obtained by the present iterative method. Quadrature phase difference and traveling waves are found in the time-domain complex modal analysis.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Modeling microstructure evolution in shape memory alloy rods via Legendre wavelets collocation method

  • He, X.
  • Tong, Z.
  • Du, H.
  • Wang, D.
  • Wang, L.X.
  • Melnik, R.
Microstructures play an important role in the research on shape memory alloys (SMA). By using mathematical modeling tools to study microstructures, it is possible to predict the behaviors of these materials under applied fields. In the current paper, a thermo-mechanical model is proposed to simulate the microstructure of a SMA rod with both fixed and impact boundary conditions via Legendre wavelets collocation method. Because of the good performance of Legendre wavelets basis, this method shows excellent properties in both precision and stability. A detailed numerical algorithm is given, and the backward differentiation formula is employed to perform all the simulations in the current paper. Computational simulations are carried out to study the stress-induced phase transformation. The dynamics of microstructure evolution, presented at different temperatures, is well captured by our developed technique.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Modelling species presence–absence in the ecological niche theory framework using shape-constrained generalized additive models

  • Citores, L.
  • Ibaibarriaga, L.
  • Lee, D.J.
  • Brewer, M.J.
  • Santos, M.
  • Chust, G.
According to ecological niche theory, species response curves are unimodal with respect to environmental gradients. A variety of statistical methods have been developed for species distribution modelling. A general problem with most of these habitat modelling approaches is that the estimated response curves can display biologically implausible shapes which do not respect ecological niche theory. This work proposes using shapeconstrained generalized additive models (SC-GAMs) to build species distribution models under the ecological niche theory framework, imposing concavity constraints in the linear predictor scale. Based on a simulation study and a real data application, we compared performance with respect to other regression models without shape-constraints (such as standard GLMs and GAMs with varying degrees of freedom) and also to models based on so-called “Plateau” climate-envelopes. The imposition of concavity for response curves resulted in a good balance between the goodness of fit (GOF) and agreement with ecological niche theory. The approach has been applied to fit distribution models for three fish species given several environmental variables.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Some classes of homeomorphisms that preserve multiplicity and tangent cones

  • Sampaio, J.E.
In this paper we present some applications of A'Campo-Lê's Theorem and we study some relations between Zariski's Questions A and B. It is presented some classes of homeomorphisms that preserve multiplicity and tangent cones of complex analytic sets. Moreover, we present a class of homeomorphisms that has the multiplicity as an invariant when we consider right equivalence and this class contains many known classes of homeomorphisms that preserve tangent cones. In particular, we present some effective approaches to Zariski's Question A. We show a version of these results looking at infinity. Additionally, we present some results related with Nash modification and Lipschitz Geometry.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On-line Elastic Similarity Measures for time series

  • Oregui, I.
  • Pérez, A.
  • Del Ser, J.
  • Lozano, J.A.
The way similarity is measured among time series is of paramount importance in many data mining and machine learning tasks. For instance, Elastic Similarity Measures are widely used to determine whether two time series are similar to each other. Indeed, in off-line time series mining, these measures have been shown to be very effective due to their ability to handle time distortions and mitigate their effect on the resulting distance. In the on-line setting, where available data increase continuously over time and not necessary in a stationary manner, stream mining approaches are required to be fast with limited memory consumption and capable of adapting to different stationary intervals. In this sense, the computational complexity of Elastic Similarity Measures and their lack of flexibility to accommodate different stationary intervals, make these similarity measures incompatible with the requirements mentioned. To overcome these issues, this paper adapts the family of Elastic Similarity Measures – which includes Dynamic Time Warping, Edit Distance, Edit Distance for Real Sequences and Edit Distance with Real Penalty – to the on-line setting. The proposed adaptation is based on two main ideas: a forgetting mechanism and the incremental computation. The former makes the similarity consistent with streaming time series characteristics by giving more importance to recent observations, whereas the latter reduces the computational complexity by avoiding unnecessary computations. In order to assess the behavior of the proposed similarity measure in on-line settings, two different experiments have been carried out. The first aims at showing the efficiency of the proposed adaptation, to do so we calculate and compare the computation time for the elastic measures and their on-line adaptation. By analyzing the results drawn from a distance-based streaming machine learning model, the second experiment intends to show the effect of the forgetting mechanism on the resulting similarity value. The experimentation shows, for the aforementioned Elastic Similarity Measures, that the proposed adaptation meets the memory, computational complexity and flexibility constraints imposed by streaming data.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Adjoint-based formulation for computing derivatives with respect to bed boundary positions in resistivity geophysics

  • Chaumont-Frelet, T.
  • Shahriari, M.
  • Pardo, D.
In inverse geophysical resistivity problems, it is common to optimize for specific resistivity values and bed boundary positions, as needed, for example, in geosteering applications. When using gradient-based inversion methods such as Gauss-Newton, we need to estimate the derivatives of the recorded measurements with respect to the inversion parameters. In this article, we describe an adjoint-based formulation for computing the derivatives of the electromagnetic fields withrespect to the bed boundary positions. The key idea to obtain this adjoint-based formulation is to separate the tangential and normal components of the field, and treat them differently. We then apply this method to a 1.5D borehole resistivity problem. We illustrate its accuracy and some of its convergence properties via numerical experimentation by comparing the results obtained with our proposed adjoint-based method vs. both the analytical results when available and a finite differences approximation of the derivative.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Convex Integration Arising in the Modelling of Shape-Memory Alloys: Some Remarks on Rigidity, Flexibility and Some Numerical Implementations

  • Rüland, A.
  • Taylor, J.M.
  • Zillinger, C.
We study convex integration solutions in the context of the modelling of shape-memory alloys. The purpose of the article is twofold, treating both rigidity and flexibility prop- erties: Firstly, we relate the maximal regularity of convex integration solutions to the presence of lower bounds in variational models with surface energy. Hence, variational models with surface energy could be viewed as a selection mechanism allowing for or excluding convex integration solutions. Secondly, we present the first numerical implementations of convex integration schemes for the model problem of the geomet- rically linearised two-dimensional hexagonal-to-rhombic phase transformation. We discuss and compare the two algorithms from Rüland et al. (J Elast. 2019. https://doi. org/10.1007/s10659-018-09719-3; SIAM J Math Anal 50(4):3791–3841, 2018) and give a numerical estimate of the regularity attained.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Bloom type upper bounds in the product BMO setting

  • Li, K.
  • Martikainen, H.
  • Vuorinen, E.
We prove some Bloom type estimates in the product BMO setting. More specifically, for a bounded singular integral $T_n$ in $\mathbb R^n$ and a bounded singular integral $T_m$ in $\mathbb R^m$ we prove that $$ \| [T_n^1, [b, T_m^2]] \|_{L^p(\mu) \to L^p(\lambda)} \lesssim_{[\mu]_{A_p}, [\lambda]_{A_p}} \|b\|_{{\rm{BMO}}_{\rm{prod}}(\nu)}, $$ where $p \in (1,\infty)$, $\mu, \lambda \in A_p$ and $\nu := \mu^{1/p}\lambda^{-1/p}$ is the Bloom weight. Here $T_n^1$ is $T_n$ acting on the first variable, $T_m^2$ is $T_m$ acting on the second variable, $A_p$ stands for the bi-parameter weights of $\mathbb R^n \times \mathbb R^m$ and ${\rm{BMO}}_{\rm{prod}}(\nu)$ is a weighted product BMO space., Juan de la Cierva - Formaci\'on 2015 FJCI-2015-24547 Academy of Finland 294840 and 306901, three-year research grant 75160010 of the University of Helsinki Jenny and Antti Wihuri Foundation
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Early classification of time series using multi-objective optimization techniques

  • Mori, U.
  • Mendiburu, A.
  • Miranda, I.M.
  • Lozano, J.A.
In early classification of time series the objective is to build models which are able to make class-predictions for time series as accurately and as early as possible, when only a part of the series is available. It is logical to think that accuracy and earliness are conflicting objectives, since the more we wait, more data points from the series are available, and it is easier to make accurate class-predictions. Con- sidering this, the problem can be very naturally formulated as a multi-objective optimization problem, and solved as such. However, the solutions proposed in the literature up to now, reduce the problem into a single-objective problem by com- bining both objectives somehow. In this paper, we present a novel multi-objective formulation of the problem of early classification, and we design a solution us- ing multi-objective optimization techniques. This method will provide a variety of solutions which find different trade-offs between both objectives, allowing the user to select the most suitable solution a-posteriori, depending on the accuracy and earliness requirements of the problem at hand. To prove the usefulness of our proposal, we carry out an extensive experimentation process using 45 benchmark databases and we present a case study in the financial domain.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Accessibility for Line-Cutting in Freeform Surfaces

  • van Sosin, B.
  • Barton, M.
  • Elber, G.
Manufacturing techniques such as hot-wire cutting, wire-EDM, wire-saw cutting, and flank CNC machining all belong to a class of processes called line-cutting where the cutting tool moves tangentially along the reference geometry. From a geometric point of view, line-cutting brings a unique set of challenges in guaranteeing that the process is collision-free. In this work, given a set of cut-paths on a freeform geometry as the input, we propose a conservative algorithm for finding collision-free tangential cutting directions. These directions, if they exist, are guaranteed to be globally accessible for fabricating the geometry by line-cutting. We then demonstrate how this information can be used to generate globally collision-free cut-paths. We apply our algorithm to freeform models of varying complexity., RYC-2017-22649
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On extension problem, trace hardy and Hardy’s inequalities for some fractional Laplacians

  • Boggarapu, P.
  • Roncal, L.
  • Thangavelu, S.
We obtain generalised trace Hardy inequalities for fractional powers of general operators given by sums of squares of vector fields. Such inequalities are derived by means of particular solutions of an extended equation associated to the above-mentioned operators. As a consequence, Hardy inequalities are also deduced. Particular cases include Laplacians on stratified groups, Euclidean motion groups and special Hermite operators. Fairly explicit expressions for the constants are provided. Moreover, we show several characterisations of the solutions of the extension problems associated to operators with discrete spectrum, namely Laplacians on compact Lie groups, Hermite and special Hermite operators., 2017 Leonardo grant for Researchers and Cultural Creators, BBVA Foundation
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Forward-in-Time Goal-Oriented Adaptivity

  • Muñoz-Matute, J.
  • Pardo, D.
  • Calo, V.M.
  • Alberdi, E.
In goal-oriented adaptive algorithms for partial differential equations, we adapt the finite element mesh in order to reduce the error of the solution in some quantity of interest. In time-dependent problems, this adaptive algorithm involves solving a dual problem that runs backward in time. This process is, in general, computationally expensive in terms of memory storage. In this work, we define a pseudo-dual problem that runs forward in time. We also describe a forward-in-time adaptive algorithm that works for some specific problems. Although it is not possible to define a general dual problem running forwards in time that provides information about future states, we provide numerical evidence via one-dimensional problems in space to illustrate the efficiency of our algorithm as well as its limitations. Finally, we propose a hybrid algorithm that employs the classical backward-in-time dual problem once and then performs the adaptive process forwards in time.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

On the evaluation and selection of classifier learning algorithms with crowdsourced data

  • Urkullu, A.
  • Pérez, A.
  • Calvo, B.
In many current problems, the actual class of the instances, the ground truth, is unavail- able. Instead, with the intention of learning a model, the labels can be crowdsourced by harvesting them from different annotators. In this work, among those problems we fo- cus on those that are binary classification problems. Specifically, our main objective is to explore the evaluation and selection of models through the quantitative assessment of the goodness of evaluation methods capable of dealing with this kind of context. That is a key task for the selection of evaluation methods capable of performing a sensible model selection. Regarding the evaluation and selection of models in such contexts, we identify three general approaches, each one based on a different interpretation of the nature of the underlying ground truth: deterministic, subjectivist or probabilistic. For the analysis of these three approaches, we propose how to estimate the Area Under the Curve (AUC) of the Receiver Operating Characteristic (ROC) curve within each interpretation, thus deriving three evaluation methods. These methods are compared in extensive experimentation whose empirical results show that the probabilistic method generally overcomes the other two, as a result of which we conclude that it is advisable to use that method when performing the evaluation in such contexts. In further studies, it would be interesting to extend our research to multiclass classification problems.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Perverse sheaves on semi-abelian varieties -- a survey of properties and applications

  • Liu, Y.
  • Maxim, L.
  • Wang, B.
We survey recent developments in the study of perverse sheaves on semi-abelian varieties. As concrete applications, we discuss various restrictions on the homotopy type of complex algebraic manifolds (expressed in terms of their cohomology jump loci), homological duality properties of complex algebraic manifolds, as well as new topological characterizations of semi-abelian varieties.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

SDE-driven modeling of phenotypically heterogeneous tumors: The influence of cancer cell stemness

  • Kroos, J.M.
  • Stinner, C.
  • Surulescu, S.
  • Surulescu, N.
We deduce cell population models describing the evolution of a tumor (possibly interacting with its environment of healthy cells) with the aid of differential equations. Thereby, different subpopulations of cancer cells allow accounting for the tumor heterogeneity. In our settings these include cancer stem cells known to be less sensitive to treatment and differentiated cancer cells having a higher sensitivity towards chemo- and radiotherapy. Our approach relies on stochastic differential equations in order to account for randomness in the system, arising e.g., due to the therapy-induced decreasing number of clonogens, which renders a pure deterministic model arguable. The equations are deduced relying on transition probabilities characterizing innovations of the two cancer cell subpopulations, and similarly extended to also account for the evolution of normal tissue. Several therapy approaches are introduced and compared by way of tumor control probability (TCP) and uncomplicated tumor control probability (UTCP). A PDE approach allows to assess the evolution of tumor and normal tissue with respect to time and to cell population densities which can vary continuously in a given set of states. Analytical approximations of solutions to the obtained PDE system are provided as well., RTI2018- 093416-B-I00
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Mesoscopic modelling and simulation of espresso coffee extraction

  • Ellero, M.
  • Navarini, L.
A mesoscopic model for the simulation of espresso extraction based on the Smoothed Particle Hydrodynamics method is presented. The model incorporates some essential features such as bimodal granulometry (fines-coarses) of the coffee bed, double (liquid/intra-granular) molecular diffusion and solid-liquid release mechanism. The porous structures ('coarses') are modelled as stationary solid regions whereas the migration of cellular fragments ('fines') is described by single-particles advected by the flow. The boundary filter is modelled as a buffer region where fines are immobilized while entering it, therefore providing a transient flow impedance. The model captures well the transient permeability of the coffee bed under direct-inverse discharge observed in experiments, showing the importance of fines migration on the hydrodynamics of the extraction. The concentration kinetics for different molecular compounds (i.e caffeine, trigonelline and chlorogenic acid) are compared to experimental data for a traditional espresso extraction, showing excellent results. The present work lays down the basis for the virtual analysis of coffee flavors by monitoring the hydrodynamic and microstructural effects on the balance of extracted key-odorant or taste-actives compounds in the beverage., Project RTI2018-094595-B-I00 funded by (AEI/FEDER, UE) and acronym “VIRHACOST”
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Lessons from Two Design–Build–Test–Learn Cycles of Dodecanol Production in Escherichia coli Aided by Machine Learning

  • Opgenorth, P.
  • Costello, Z.
  • Okada, T.
  • Goyal, G.
  • Chen, Y.
  • Gin, J.
  • Benites, V.
  • de Raad, M.
  • Northen, T.R.
  • Deng, K.
  • Deutsch, S.
  • Baidoo, E.E.K.
  • Petzold, C.J.
  • Hillson, N.J.
  • Garcia-Martin, H.
  • Beller, H.R.
The Design–Build–Test–Learn (DBTL) cycle, facilitated by exponentially improving capabilities in synthetic biology, is an increasingly adopted metabolic engineering framework that represents a more systematic and efficient approach to strain development than historical efforts in biofuels and biobased products. Here, we report on implementation of two DBTL cycles to optimize 1-dodecanol production from glucose using 60 engineered Escherichia coli MG1655 strains. The first DBTL cycle employed a simple strategy to learn efficiently from a relatively small number of strains (36), wherein only the choice of ribosome-binding sites and an acyl-ACP/acyl-CoA reductase were modulated in a single pathway operon including genes encoding a thioesterase (UcFatB1), an acyl-ACP/acyl-CoA reductase (Maqu_2507, Maqu_2220, or Acr1), and an acyl-CoA synthetase (FadD). Measured variables included concentrations of dodecanol and all proteins in the engineered pathway. We used the data produced in the first DBTL cycle to train several machine-learning algorithms and to suggest protein profiles for the second DBTL cycle that would increase production. These strategies resulted in a 21% increase in dodecanol titer in Cycle 2 (up to 0.83 g/L, which is more than 6-fold greater than previously reported batch values for minimal medium). Beyond specific lessons learned about optimizing dodecanol titer in E. coli, this study had findings of broader relevance across synthetic biology applications, such as the importance of sequencing checks on plasmids in production strains as well as in cloning strains, and the critical need for more accurate protein expression predictive tools.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Machine learning framework for assessment of microbial factory performance

  • Oyetunde, T.
  • Liu, D.
  • Garcia-Martin, H.
  • Tang, Y.J.
Metabolic models can estimate intrinsic product yields for microbial factories, but such frameworks struggle to predict cell performance (including product titer or rate) under suboptimal metabolism and complex bioprocess conditions. On the other hand, machine learning, complementary to metabolic modeling necessitates large amounts of data. Building such a database for metabolic engineering designs requires significant manpower and is prone to human errors and bias. We propose an approach to integrate data-driven methods with genome scale metabolic model for assessment of microbial bio-production (yield, titer and rate). Using engineered E. coli as an example, we manually extracted and curated a data set comprising about 1200 experimentally realized cell factories from ~100 papers. We furthermore augmented the key design features (e.g., genetic modifications and bioprocess variables) extracted from literature with additional features derived from running the genome-scale metabolic model iML1515 simulations with constraints that match the experimental data. Then, data augmentation and ensemble learning (e.g., support vector machines, gradient boosted trees, and neural networks in a stacked regressor model) are employed to alleviate the challenges of sparse, non-standardized, and incomplete data sets, while multiple correspondence analysis/principal component analysis are used to rank influential factors on bio-production. The hybrid framework demonstrates a reasonably high cross-validation accuracy for prediction of E.coli factory performance metrics under presumed bioprocess and pathway conditions (Pearson correlation coefficients between 0.8 and 0.93 on new data not seen by the model).
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Brain energetics plays a key role in the coordination of electrophysiology, metabolism and hemodynamics: evidence from an integrated computational model

  • Capo Rangel, G.
  • Prezioso, J.
  • Gerardo-Giorda, L.
  • Somersalo, E.
  • Calvetti, D.
The energetic needs of brain cells at rest and during elevated neuronal activation has been the topic of many investigations where mathematical models have played a significant role providing a context for the interpretation of experimental findings. A recently proposed mathematical model, comprising a double feedback between cellular metabolism and electrophysiology, sheds light on the interconnections between the electrophysiological details associated with changes in the frequency of neuronal firing and the corresponding metabolic activity. We propose a new extended mathematical model comprising a three-way feedback connecting metabolism, electrophysiology and hemodynamics. Upon specifying the time intervals of higher neuronal activation, the model generates a potassium based signal leading to the concomitant increase in cerebral blood flow with associated vasodilation and metabolic changes needed to sustain the increased energy demand. The predictions of the model are in good qualitative and quantitative agreement with experimental findings reported in the literature, even predicting a slow after-hyperpolarization of a duration of approximately 16 s matching experimental observations., The work of Daniela Calvetti was partly support by NSF grants DMS-1522334 and NIH grant 1U01 GM111251-01. The work of Erkki Somersalo was partly support by NSF grants DMS 1714617 and NIH grant 1U01GM111251-01.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Exploring Li-ion conductivity in cubic, tetragonal and mixed-phase Al-substituted Li7La3Zr2O12 using atomistic simulations and effective medium theory

  • Rincón, M.
  • García Daza, F.A.
  • Carrasco, J.
  • Akhmatskaya, E.
Garnet Li7La3Zr2O12 (LLZO) is a promising solid electrolyte candidate for solid-state Li-ion batteries, but at room temperature it crystallizes in a poorly Li-ion conductive tetragonal phase. To this end, partial substitution of Li+ by Al3+ ions is an effective way to stabilize the highly conductive cubic phase at room temperature. Yet, fundamental aspects regarding this aliovalent substitution remain poorly understood. In this work, we use molecular dynamics and advanced hybrid Monte Carlo methods for systematic study of the room temperature Li-ion diffusion in tetragonal and cubic LLZO to shed light on important open questions. We find that Al substitution in tetrahedral sites of the tetragonal LLZO allows previously inaccessible sites to become available, which enhances Li-ion conductivity. In contrast, in the cubic phase Li-ion diffusion paths become blocked in the vicinity of Al ions, resulting in a decrease of Li-ion conductivity. Moreover, combining the conductivities of individual phases through an effective medium approximation allowed us to estimate the conductivities of cubic/tetragonal phase mixtures that are in good agreement with those reported in several experimental works. This suggests that phase coexistence (due to phase equilibrium or gradients in Al content within a sample) could have a significant impact on the conductivity of Al-substituted LLZO, particularly at low contents of Al3+. Overall, by making a thorough comparison with reported experimental data, the theoretical study and simulations of this work advance our current understanding of Li-ion mobility in Al-substituted LLZO garnets and might guide future in-depth characterization experiments of this relevant energy storage material., MINECO ENE2016-81020-R. SGI/IZO-SGIker UPV/EHU. the i2BASQUE academic network. Barcelona Supercomputer Center (QCM-2016-450 3-0002).
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Examples of varieties with index one on C1 fields

  • Dan, A.
  • Kaur, I.
Let K be the fraction field of a Henselian discrete valuation ring with algebraically closed residue field k. In this article we give a sufficient criterion for a projective variety over such a field to have index 1.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

A Hardy-type inequality and some spectral characterizations for the Dirac–Coulomb operator

  • Cassano, B.
  • Pizzichillo, F.
  • Vega, L.
We prove a sharp Hardy-type inequality for the Dirac operator. We exploit this inequality to obtain spectral properties of the Dirac operator perturbed with Hermitian matrix-valued potentials $\mathbf V$ of Coulomb type: we characterise its eigenvalues in terms of the Birman—Schwinger principle and we bound its discrete spectrum from below, showing that the ground-state energy is reached if and only if $\mathbf V$ verifies some rigidity conditions. In the particular case of an electrostatic potential, these imply that $\mathbf V$ is the Coulomb potential.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Conductance-Based Refractory Density Approach for a Population of Bursting Neurons

  • Chizhov, A.
  • Campillo, F.
  • Desroches, M.
  • Guillamon A
  • Rodrigues, S.
The conductance-based refractory density (CBRD) approach is a parsimonious mathematical-computational framework for modeling interact- ing populations of regular spiking neurons, which, however, has not been yet extended for a population of bursting neurons. The canonical CBRD method allows to describe the firing activity of a statistical ensemble of uncoupled Hodgkin-Huxley-like neurons (differentiated by noise) and has demonstrated its validity against experimental data. The present manuscript generalises the CBRD for a population of bursting neurons; however, in this pilot computational study we consider the simplest setting in which each individual neuron is governed by a piecewise linear bursting dynamics. The resulting popula- tion model makes use of slow-fast analysis, which leads to a novel method- ology that combines CBRD with the theory of multiple timescale dynamics. The main prospect is that it opens novel avenues for mathematical explo- rations, as well as, the derivation of more sophisticated population activity from Hodgkin-Huxley-like bursting neurons, which will allow to capture the activity of synchronised bursting activity in hyper-excitable brain states (e.g. onset of epilepsy)., Russian Science Foundation grant (project 16-15- 10201) Spanish grant MINECO-FEDER-UE MTM-2015-71509-C2-2-R Catalan Grant number 2017SGR1049
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Using Covariance Matrix Adaptation Evolutionary Strategy to boost the search accuracy in hierarchic memetic computations

  • Sawicki, J.
  • Los, M.
  • Smolka, M.
  • Alvarez-Aramberri, J.
Many global optimization problems arising naturally in science and engineering exhibit some form of intrinsic ill-posedness, such as multimodality and insensitivity. Severe ill-posedness precludes the use of standard regularization techniques and necessitates more specialized approaches, usually comprised of two separate stages - global phase, that determines the problem's modality and provides rough approximations of the solutions, and a local phase, which re fines these approximations. In this work, we attempt to improve one of the most efficient currently known approaches - Hierarchic Memetic Strategy (HMS) - by incorporating the Covariance Matrix Adaptation Evolutionary Strategy (CMA-ES) into its local phase. CMA-ES is a stochastic optimization algorithm that in some sense mimics the behavior of population-based evolutionary algorithms without explicitly evolving the population. This way, it avoids, to an extent, the associated cost of multiple evaluations of the objective function. We compare the performance of the HMS on relatively simple multimodal benchmark problems and on an engineering problem. To do so, we consider two con gurations: the CMA-ES and the standard SEA (Simple Evolutionary Algorithm). The results demonstrate that the HMS with CMA-ES in the local phase requires less objective function evaluations to provide the same accuracy, making this approach more efficient than the standard SEA.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Endpoint Sobolev continuity of the fractional maximal function in higher dimensions

  • Beltran, D.
  • Madrid, J.
We establish continuity mapping properties of the non-centered fractional maximal operator $M_{\beta}$ in the endpoint input space $W^{1,1}(\mathbb{R}^d)$ for $d \geq 2$ in the cases for which its boundedness is known. More precisely, we prove that for $q=d/(d-\beta)$ the map $f \mapsto |\nabla M_\beta f|$ is continuous from $W^{1,1}(\mathbb{R}^d)$ to $L^{q}(\mathbb{R}^d)$ for $ 0 < \beta < 1$ if $f$ is radial and for $1 \leq \beta < d$ for general $f$. The results for $1\leq \beta < d$ extend to the centered counterpart $M_\beta^c$. Moreover, if $d=1$, we show that the conjectured boundedness of that map for $M_\beta^c$ implies its continuity.
BIRD. BCAM's Institutional Repository Data
Publicación Artículo científico (JournalArticle)

Bilinear identities involving the

k
  • Beltran, D.
  • Vega, L.
We prove certain $L^2(\mathbb{R}^n)$ bilinear estimates for Fourier extension operators associated to spheres and hyperboloids under the action of the $k$-plane transform. As the estimates are $L^2$-based, they follow from bilinear identities: in particular, these are the analogues of a known identity for paraboloids, and may be seen as higher-dimensional versions of the classical $L^2(\mathbb{R}^2)$-bilinear identity for Fourier extension operators associated to curves in $\mathbb{R}^2$.