Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Deep-sea litter in the Gulf of Cadiz (Northeastern Atlantic, Spain)

  • Mechó, Ariadna
  • Francescangeli, Marco
  • Ercilla, Gemma
  • Fanelli, Emanuela
  • Estrada, Ferran
  • Valencia, Javier
  • Sobrino, Ignacio
  • Danovaro, Roberto
  • Company, Joan B.
  • Aguzzi, Jacopo
8 pages, 6 figures, 2 tables, This study describes the distribution and composition of litter from the Gulf of Cadiz (Northeastern Atlantic,Spain), a region of confluence between the Atlantic and Mediterranean, with intense maritime traffic. Several geological features, such as canyons, open slopes and contourite furrows and channels, were surveyed by remotely operated vehicle (ROV) observations between depths of 220 and 1000 m. Marine litter was quantified by grouping the observations into six categories. Our results indicate the presence of markedly different habitats in which a complex collection of different types of litter accumulate in relation to bottom current flows and maritime and fishing routes. This result justifies a seascape approach in further anthropogenic impact studies within deep-sea areas, The present study was developed in the framework of the Tecnoterra (ICM-CSIC/UPC) Associate Unit and the following project activities, funded by the Spanish Government MOWER (CTM2012-39599-C03), FAUCES (CTM2015-65461-C2-1-R) and RESBIO (TEC2017-87861-R), plus the ARIM (Autonomous Robotic sea-floor Infrastructure for benthopelagic Monitoring) funded by the MartTERA ERA-Net Cofound. Francescangeli M. was funded by the European Project ERASMUS grant 2017. Mecho A. was partially funded by the Pure Ocean Fund, managed by the King Baudouin Foundation, With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering vacancies in Bi2S3 yielding sub-bandgap photoresponse and highly sensitive short-wave infrared photodetectors

  • Huo, Nengjie
  • Figueroba, Alberto
  • Yang, Yujue
  • Christodoulou, Sotirios
  • Stavrinadis, Alexandros
  • Magén, César
  • Konstantatos, Gerasimos
Defects play an important role in tailoring the optoelectronic properties of materials. Here we demonstrate that sulphur vacancies are able to engineer sub-band photoresponse into the short-wave infrared range due to formation of in-gap states in Bi2S3 single crystals supported by density functional (DF) calculations. Sulfurization and subsequent refill of the vacancies results in faster response but limits the spectral range to the near infrared as determined by the bandgap of Bi2S3. A facile chemical treatment is then explored to accelerate the speed of sulphur deficient (SD)-based detectors on the order of 10 ms without sacrificing its spectral coverage into the infrared, while holding a high D* close to 10^15 Jones in the visible-near infrared range and 10^12 Jones at 1.6 um. This work also provides new insights into the role sulphur vacancies play on the electronic structure and, as a result, into sub-bandgap photoresponse enabling ultrasensitive, fast and broadband photodetectors., The authors acknowledge financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no. 725165), the Spanish Ministry of Economy and Competitiveness (MINECO), and the “Fondo Europeo de Desarrollo Regional” (FEDER) through grant TEC2017-88655-R. The authors also acknowledge financial support from Fundacio Privada Cellex, the program CERCA and from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0522). Y.Y. acknowledges support from the National Natural Science Foundation of China under grant no. 61805045. S.C. acknowledges support from Marie Curie Standard European Fellowship (“NAROBAND”, H2020-MSCA-IF-2016-750600). Furthermore, the research leading to these results has received funding from the European Union H2020 Programme under grant agreement no. 785219 Graphene Flagship, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Visual monitoring of key deep-sea megafauna with an Internet Operated crawler as a tool for ecological status assessment

  • Chatzievangelou, Damianos
  • Aguzzi, Jacopo
  • Ogston, Andrea S.
  • Suárez, Alejandro
  • Thomsen, Laurenz
11 pages, 4 figures, 4 tables, supplementary material https://doi.org/10.1016/j.pocean.2020.102321.-- All environmental data are available in Supplementary Tables S1.1 to S1.4. All raw images are archived and can be downloaded from the Oceans 2.0 Ocean Networks Canada online database, using the following link: https://data.oceannetworks.ca/DataSearch?location=BACWL.V3&deviceCategory=VIDEOCAM, The spatio-temporal distribution of seven abundant morphospecies (i.e. taxa identified based on morphological traits) and the diversity of the benthic megafaunal community at the Barkley Canyon hydrates site (870 m, Vancouver Island, BC, Canada) were assessed in 18 linear imaging transects (each transect ~30 m long), conducted with an Internet Operated Deep-sea Crawler in November 2016. Faunal counts (as proxy for local abundances) were treated as Poisson-behaving variables and were modeled and correlated to habitat quality (i.e. level of physical seafloor disturbance, as previously induced by the crawler), fluctuating oceanographic conditions (i.e. tides and currents, seasonal transitions and episodic particle fluxes) and temporally and spatially varying food availability (i.e. elevated chlorophyll levels, proximity to the hydrate mounds as additional energy sources). The model outcome was used to establish a potential trigger-notification procedure for substrate disturbance monitoring when ratios of faunal abundances exceed the expected range for any morphospecies. Finally, a quality assessment of the crawler’s performance as a multidisciplinary monitoring platform was performed using individual and morphospecies accumulation curves, which aids in optimizing and standardizing data collection protocols. We showed that the abundances and diversity of hydrates megafaunal community differed in relation to physical seafloor disturbance, proximity to the hydrate mounds and episodic food input, at varying degrees. Our work sets a solid base for the future real-time, long-term monitoring of ecosystem functioning and health status in deep-sea areas exposed to industrial substrate alterations (i.e. mining, fisheries, etc.), This study was conducted within the framework of Ocean Networks Canada and NEPTUNE Canada, Helmholtz Alliance and Tecnoterra (ICM-CSIC/UPC) and the following project activities: ROBEX (HA-304), ARIM (Autonomous Robotic sea-floor Infrastructure for benthopelagic Monitoring; MartTERA ERA-Net Cofound) and RESBIO (TEC2017-87861-R; Ministerio de Ciencia, Innovación y Universidades), With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mobile robotic platforms for the acoustic tracking of deep-sea demersal fishery resources

  • Masmitja, Ivan
  • Navarro, Joan
  • Gomáriz, Spartacus
  • Aguzzi, Jacopo
  • Kieft, Brian
  • O'Reilly, Tom
  • Katija, Kakani
  • Bouvet, P.J.
  • Fannjiang, Clara
  • Vigo Fernandez, María
  • Puig, Pere
  • Alcocer, A.
  • Vallicrosa, Guillem
  • Palomeras, Narcís
  • Carreras, Marc
  • Río, Joaquín del
  • Company, Joan B.
15 pages, 6 figures, 2 tables, supplementary material https://doi.org/10.1126/scirobotics.abc3701.-- This manuscript has been accepted for publication in Science Robotics. This version has not undergone final editing. Please refer to the complete version of record at https://robotics.sciencemag.org/content/5/48/eabc3701. The manuscript may not be reproduced or used in any manner that does not fall within the fair use provisions of the Copyright Act without the prior, written permission of AAAS, Knowing the displacement capacity and mobility patterns of industrially exploited (i.e., fished) marine resources is key to establishing effective conservation management strategies in human-impacted marine ecosystems. Acquiring accurate behavioral information of deep-sea fished ecosystems is necessary to establish the sizes of marine protected areas within the framework of large international societal programs (e.g., European Community H2020, as part of the Blue Growth economic strategy). However, such information is currently scarce, and high-frequency and prolonged data collection is rarely available. Here, we report the implementation of autonomous underwater vehicles and remotely operated vehicles as an aid for acoustic long-baseline localization systems for autonomous tracking of Norway lobster (Nephrops norvegicus), one of the key living resources exploited in European waters. In combination with seafloor moored acoustic receivers, we detected and tracked the movements of 33 tagged lobsters at 400-m depth for more than 3 months. We also identified the best procedures to localize both the acoustic receivers and the tagged lobsters, based on algorithms designed for off-the-shelf acoustic tags identification. Autonomous mobile platforms that deliver data on animal behavior beyond traditional fixed platform capabilities represent an advance for prolonged, in situ monitoring of deep-sea benthic animal behavior at meter spatial scales, This work received financial support from different research projects of the Spanish Ministerio de Economía y Competitividad (RESNEP: CTM2017-82991-C2-1-R; RESBIO: TEC2017-87861-R; and SASES: RTI2018-095112-B-I00), of the Generalitat de Catalunya “Sistemas de Adquisición Remota de datos y Tratamiento de la Información en el Medio Marino (SARTI-MAR)” 2017 SGR 371, and NSF-IDBR (#145501 to K.K.). J.N. was funded by the Spanish National Program Ramón y Cajal (RYC-2015-17809). This project has also received support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie–Individual Fellowship grant agreement AIforUTracking No. 893089, With the funding support of the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S), of the Spanish Research Agency (AEI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Developing an acoustic tag with bidirectional communications capabilities

  • Masmitja, Ivan
  • Gomáriz, Spartacus
  • Bouvet, P.J.
  • Aguzzi, Jacopo
  • Río, Joaquín del
Special issue 9th MARTECH: International Workshop on Marine Technology: 16-18 June 2021, Vigo, Spain.-- 2 pages, 3 figures, The study of marine animal behavior is crucial to manage fisheries stocks and to understand the climate change effect on them, especially their moving patterns. In order to achieve that, different methods have been developed during the last years, specially using acoustic tags. However, all the tags available nowadays are transmitters, and therefore, can only be used as a ¿listen method¿. Here, we present a new acoustic tag with bidirectional communications capabilities (i.e. can transmit and also receive acoustic signals). This approach will allow the possibility to use new techniques to study marine animals (e.g. range-only and singe-beacon methods with autonomous vehicles), and therefore, increase the knowledge of their behaviour, This work received financial support from the Spanish Ministerio de Economia y Competitividad (contract TEC2017-87861-R project RESBIO, and RTI2018-095112-B-I00 project SASES), and from the Generalitat de Catalunya "Sistemas de Adquisición Remota de datos y Tratamiento de la Información en el Medio Marino (SARTI-MAR)" 2017 SGR 371. This work has been directed and carried out by members of the Tecnoterra-associated unit of the Scientific Research Council through the Universitat Politècnica de Catalunya, the Jaume Almera Earth Sciences Institute and the Marine Science Institute. IM was funded by a MSCA-IF-GF (ID:893089, H2020-EU.1.3.2, European Commission)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Tele-operated ecological monitoring at the seafloor observatory (OBSEA)

  • Falahzadeh, Ahmad
  • Aguzzi, Jacopo
  • Nogueras, Marc
  • Toma, Daniel M.
  • Carandell, Matias
  • Francescangeli, Marco
  • Thomsen, Laurenz
  • Río, Joaquín del
Special issue 9th MARTECH: International Workshop on Marine Technology: 16-18 June 2021, Vigo, Spain.-- 1 page, 1 figure, The development of new cabled oceanographic observatories is becoming of extreme importance to monitor in real-time a continuously changing environment. In this context, a local coastal network of fxed and mobile videomonitoring platforms was created at the OBSEA (www.obsea.es; [1]) as European Multidisciplinary Seafoor and water column Observatory EMSO Testing-Site [2]. The cabled platform is located 4 km ofshore of Vilanova i la Geltrú coast (Barcelona, Spain), at a depth of 20 m. The observatory has been used to install a network of cameras including OBSEA fxed camera, plus a movable satellite tripod. Also, a mobile camera will be installed on an Internet Operated Vehicle (IOV), as a coastal crawler. These tele-operated vehicles are being used by marine scientists, to carry out multiparametric environmental studies (via the diversifed set of oceanographic and geochemical sensors) centered on faunal monitoring via imaging. As far as cabled seafoor observatories (and also OBSEA) are not able to move and their data collection capability is limited, it was decided to expand the monitoring capacity of the OBSEA, by connecting it to a new costal crawler. This crawler is a modifed prototype of the “Wally” platform series, which is operating at the Ocean Networks Canada (ONC; www.oceannetworks. ca) since 2010 [3]. This coastal crawler will be used to perform back and forth video transects between the fxed OBSEA camera and its satellite tripod camera (80 m away), to analyze the possible efect of environmental heterogeneity on the perceived fsh community abundance and composition. This will also allow scaling the biodiversity gathered data over a larger and more ecologicallyrepresentative area. In this scenario, we aim to present the technological design and specifcations of the modifed coastal crawler (Fig. 1). A mobile camera (1) in a glass sphere (rated for 3000 m depth) with 360° pan and 180° tilt operability has been installed, to allow the operator to perform SCUBA divers as visual census transects, by looking forward during transect progression, widening the visual feld with panoramic sweeps when needed. The tracks (2) are independent parts allowing to scale the inner part of the vehicle simply by mounting a broader main plait. The chains are made of rubber with embedded steel. Each track is driven by a powerful DC motor with a reduction gear of 989:1. The motor housings are pressure compensated by fuid flling. The junction cylinder (3) contents the driving electronics and an Ethernet switch to connect the camera and the control cylinder to the main communication cable. This housing can variate in material and dimensions to allow its use at diferent depths. The main cable (4) is a of special underwater Ethernet foating type to avoid problems like seabed abrasion and platform entanglement. A control cylinder (5) is used for controlling the crawler and the camera, providing power from the junction cylinder to supply motors. Finally, there are two 12V, 3W lights (6) that can turn on for flming at night, This work is partially funded by Generalitat de Catalunya “Sistemas de Adquisición Remota de datos y Tratamiento de la Información en el Medio Marino” (SARTI-MAR)” 2017 SGR 371 and by the Spanish Ministry of Education and Science (MEC) with the project “Redes de sensores submarinos autónomos y cableados aplicados a la monitorización remota de indicadores biológicos” TEC2017-87861-R. Researchers want to acknowledge the support of the Associated Unit Tecnoterra composed by members of Universidad Politécnica de Cataluña (UPC) and the Consejo Superior de Investigaciones Científicas (CSIC). This work used the EGI infrastructure with the dedicated support of INFN-CATANIA-STACK. The crawler was provided by OceanLab of Jacobs University Bremen (L. Thomsen), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A decade of time series as produced by multiparametric ecological monitoring at the OBSEA

  • Francescangeli, Marco
  • Falahzadeh, Ahmad
  • Fornós, Andreu
  • Nogueras, Marc
  • Chatzievangelou, Damianos
  • Río, Joaquín del
  • Marini, Simone
  • Aguzzi, Jacopo
Special issue 9th MARTECH: International Workshop on Marine Technology: 16-18 June 2021, Vigo, Spain.-- 2 pages, 2 figures, All biological processes, from molecular to physiology and behavioural, are essential for organisms to regulate their survival in response to the environment (e.g., irradiance and temperature) and to intra- or inter- specifc interactions (e.g. predation and competition). In the marine environment, there is a strong correlation between biological rhythms and light cycles, which varies upon the depth, with the relevance of other factors, such as current speed, still far from fully understood. Rhythmic behavioural regulation results in the massive displacement of organisms at diferent depths over diel and seasonal scales, and this may result even in bathymetric or geographic distribution shifts over the years, as a result of coping with climate change conditioning. Even if the timing of biological processes is essential for all organisms, those processes are seldom studied in the marine environments, compared to the terrestrial ones. Today, the collection of data from cabled seafoor video-observatories equipped with mobile video-platforms (e.g. crawlers) is becoming feasible. Cabled observatories enable researchers to collect environmental and biological data in a concomitant fashion, and when monitoring networks of platforms are deployed, more spatially representative long-term studies on the biases that behavioural rhythms (i.e. massive population displacements) exert on population size and biodiversity assessments are accessible. In this framework, a local coastal network of fxed and mobile video-monitoring platforms was created at the OBSEA (www.obsea.es), located at 4 km of of Vilanova i la Geltrú (Barcelona, Spain), at a depth of 20 m. The OBSEA is a cabled observatory bearing two fxed cameras (i.e. the platform one includes camera 1 and a second camera, camera 2, as a movable tripod), focusing two diferent artifcial reefs. The concomitant time-lapse imaging by diferent cameras and environmental multiparametric data acquisition would allow the analysis of diferent biodiversity indicators such as the composition of communities (i.e. richness) and relative abundance of species (i.e. evenness), as well as ecosystem functions (e.g. food-web structure, carbon and energy fuxes etc.), at diferent time scales, together with inference of potential causeand-efects principles between environmental drivers and biological variables. Here, we aim to fully present the multidisciplinary data set acquired since January 2012, at a high-frequency (30 min), continuously during the day and the night, reporting count fuctuations in 27 bony fsh species. Every photo captured each 30 min from the two installed cameras was analyzed manually by trained operators. All photos had a stamped time code to match each detected faunal entry (classifed by trained operators) to the concomitant environmental data acquired by diferent sensors. A CTD and an ADPC provided data on temperature and salinity as well as pressure and water current speed and direction, respectively. Those data were associated to turbidity and chlorophyll data. Furthermore, we used automatically recorded meteorology entries by a Catalan Meteorological Service station in Sant Pere de Ribes (6 km from the OBSEA), to derive data on the global sun irradiance, wind speed and direction, as well as rain. Difculties in data acquisition due to sensors maintenance are described along with potential examples of data treatment, in spite of the marked diel and seasonal variations in total fsh-community counts as a product of behavioural rhythms (Fig. 1). This tendency is maintained throughout the seasons with the amplitude of the total fsh counts curve following the variation in the photophase length amplitude, described through the sun irradiance (Figure 2). The comparison between the total number of fshes and the irradiance shows a consistent increase in individual counts during the day for the large majority of species. Then, the polynomial curve analysis derived from the raw total count data was introduced, to further highlight that diurnal tendency. Even so, this curve shows two up-turning tails during night time due to the presence of few active nocturnal species in the area. Furthermore, we observed that the faunal abundance curve width is larger than the irradiance curve. This could be explained by the presence of crepuscular species that avoid fully diurnal visual predators, by anticipating or dealing the timing of their activity according to a tradeof between energy gaining and mortality risks. We also introduced a diel threshold, the Midline Estimated Statistic of Rhythm (MESOR) to evidence peaks limits in terms of the onset and ofset timings of signifcant count increases within the fsh community. This has been calculated by reaveraging all the time series mean values. All the analyses were carried out with custom algorithms developed in Python, The main author wants to acknowledge his FPI grant from the Spanish Ministry of Science and Innovation founded by the European Social Found (ref. TEC2017-87861-R). This work is partially funded the Spanish Ministry of Education and Science (MEC) with the project “Redes de sensores submarinos autónomos y cableados aplicados a la monitorización remota de indicadores biológicos” TEC2017-87861-R and by Generalitat de Catalunya “Sistemas de Adquisición Remota de datos y Tratamiento de la Información en el Medio Marino” (SARTI-MAR)” 2017 SGR 371. Researchers want to acknowledge the support of the Associated Unit Tecnoterra composed by members of Universidad Politécnica de Cataluña (UPC) and the Consejo Superior de Investigaciones Científicas (CSIC). This work used the EGI infrastructure with the dedicated support of INFN-CATANIA-STACK and data derived from ‘estacions meteorològiques automàtiques de la xarxa d’estacions de Catalunya (XEMA), Meteocat, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Timing-Optimized Hardware Implementation to Accelerate Polynomial Multiplication in the NTRU Algorithm

  • Eros Camacho-Ruiz
  • Sánchez-Solano, Santiago
  • Brox, Piedad
  • Martínez-Rodríguez, Macarena Cristina
Post-Quantum Cryptographic (PQC) algorithms have emerged to secure communication channels between electronic devices faced with the advent of quantum computers. The performance of PQC algorithms on embedded systems has to be evaluated in orderto achieve a good trade-off between required resources (area) and timing. This work presents two optimized implementations to speed up the NTRUEncrypt algorithm on a System-on-Chip (SoC). The strategy is based on accelerating the most time-consuming operation that is the truncated polynomial multiplication. Hardware dedicated modules for multiplication are designed by exploiting the presence of consecutive zeros in the coefficients of the blinding polynomial. The results are validated on a Pynq-Z2 platform that includes a Zynq-7000 SoC from Xilinx and supports a Python-based programming environment. The optimized version that exploits the presence of double, triple, and quadruple consecutive zeros offers the best performance in timing, in addition to considerably reducing the possibility of an information leakage against an eventual attack on the device, making it practically negligible, This work was supported in part by TEC2017-83557-R project from Spanish Government and AT17 5926 USE from Junta de Andalucía, both with support from the P.O. FEDER of European Union, and LINKA20216 project from CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental Characterization of Time-Dependent Variability in Ring Oscillators

  • Núñez, Juan
  • Roca, Elisenda
  • Castro-López, Rafael
  • Martín-Martínez, Javier
  • Rodríguez, Rosana
  • Nafria, M.
  • Fernández, Francisco V.
Talk delivered in International Conference on Synthesis, Modeling, Analysis and Simulation Methods, and Applications to Circuit Design (SMACD) in Lausanne (Switzerland), 15-18 July 2019. © 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Reliability in CMOS-based integrated circuits has always been a critical concern. In today's ultra-scaled technologies, a time-varying kind of variability has raised that, on top of the well-known time-zero variability, threatens to shorten the lifetime of integrated circuits, both analog and digital. Effects like Bias Temperature Instability and Hot Carriers Injection need to be studied, characterized and modeled to include, and, thus, mitigate, their impact in the design of CMOS integrated circuits. This paper presents an array-based integrated circuit whose purpose is precisely that: to observe, quantify and characterize the impact of time-dependent variability effects in a specific kind of circuits: Ring Oscillators., This work has been funded by Ministerio de Economía y Competitividad del Gobierno de España with support from ERDF (Projects TEC2016-75151-C3-R, TEC2017-87052-P)., Peer reviewed