Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 1126
Encontrada(s) 12 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Ti supersaturated Si by microwave annealing processes

  • Olea Ariza, Javier
  • González Díaz, Germán
  • Pastor Pastor, David
  • García Hemme, Eric
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • Pérez Zenteno, Francisco José
  • Duarte Cano, Sebastián
  • García Hernansanz, Rodrigo
  • Prado Millán, Álvaro Del
  • San Andrés Serrano, Enrique
  • Martil De La Plaza, Ignacio
  • Lee, Yao-Jen
  • Hong, Tzu-Chieh
  • Chao, Tien-Sheng
Microwave annealing (MWA) processes were used for the first time to obtain Ti supersaturated Si. High Ti doses were ion implanted on Si substrates and subsequently MWA processed to recrystallize the amorphous layer. The resulting layers were monocrystalline with a high density of defects. Ti depth profiles indicate that diffusion is avoided once recrystallization is produced. Finally, the electronic transport properties measurements point to a decoupling effect between the Si:Ti layer and the substrate. The implanted layer present also a shallow donor and very high Hall mobility.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Estimation of the melting threshold of Ti supersaturated Si using time resolved reflectometry and haze measurements

  • Montero Álvarez, Daniel
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • García Hernansanz, Rodrigo
  • Suler, Andrej
  • Acosta Alba, Pablo
  • Kerdiles, Sébastien
  • Pastor Pastor, David
  • García Hemme, Eric
  • Roy, Francois
  • Olea Ariza, Javier
Hyperdoped or supersaturated semiconductors are gathering the attention of industry and research institutions due to their sub-bandgap photon absorption properties. In this study, two fast and non-invasive techniques, time-resolved reflectometry (TRR) and Haze Measurements, are applied to infer the melt and solidification regimes of Ti supersaturated 300 mm silicon wafers, aiming to ease the characterization process towards high volume manufacturing of supersaturated materials. Ti supersaturation is attained by using an ion implantation process with a dose 3 x 10(15) cm(-2), which amorphizes the surface. Crystalline quality is then recovered by means of a XeCl UV nanosecond laser annealing process. TRR technique is used to determine two different melting and solidification processes of the laser annealed implanted surface. A first brief, low temperature peak (alpha peak) is associated with the melting process of the amorphized surface, followed by a longer peak/plateau (beta (1) peak/plateau), linked to the melting process of the crystalline phase below the amorphized layer, at sufficiently high laser fluences. Haze technique is used to indirectly measure the crystalline quality after the solidification process of the laser-annealed surface. Atomic force microscopy measurements are used to obtain the surface roughness value and cross-section high resolution transmission electron microscopy micrographs to check crystalline quality.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A Graphene Field-Effect Transistor Based Analogue Phase Shifter for High-Frequency Applications

  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Cuesta-López, Juan|||0000-0001-7905-9969
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
We present a graphene-based phase shifter for radio-frequency (RF) phase-array applications. The core of the designed phase-shifting system consists of a graphene field-effect transistor (GFET) used in a common source amplifier configuration. The phase of the RF signal is controlled by exploiting the quantum capacitance of graphene and its dependence on the terminal transistor biases. In particular, by independently tuning the applied gate-to-source and drain-to-source biases, we observe that the phase of the signal, in the super-high frequency band, can be varied nearly 200° with a constant gain of 2.5 dB. Additionally, if only the gate bias is used as control signal, and the drain is biased linearly dependent on the former (i.e., in a completely analogue operation), a phase shift of 85° can be achieved making use of just one transistor and keeping a gain of 0 dB with a maximum variation of 1.3 dB. The latter design can be improved by applying a balanced branch-line configuration showing to be competitive against other state-of-the-art phase shifters. This work paves the way towards the exploitation of graphene technology to become the core of active analogue phase shifters for high-frequency operation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Compact Modeling of pH-Sensitive FETs Based on 2-D Semiconductors

  • Grour, Tarek El|||0000-0003-2963-7104
  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Najari, Montassar|||0000-0002-5382-8528
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Toral-Lopez, Alejandro|||0000-0001-5612-0536
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
  • Mir, Lassaad El
We present a physics-based circuit-compatible model for pH-sensitive field-effect transistors based on 2-D materials. The electrostatics along the electrolyte-gated 2-D-semiconductor stack is treated by solving the Poisson equation, including the site-binding model and the Gouy-Chapman-Stern approach, while the carrier transport is described by the drift-diffusion theory. The proposed model is provided in an analytical form and then implemented in Verilog-A, making it compatible with standard technology computer-aided design tools employed for circuit simulation. The model is benchmarked against two experimental transition-metal-dichalcogenide (MoS2 and ReS2)-based ion sensors, showing excellent agreement when predicting the drain current, threshold voltage shift, and current/voltage sensitivity measurements for different pH concentrations.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the impact of the bias-dependent charge neutrality point on graphene based multi-transistor applications

  • Pasadas, Francisco|||0000-0003-3992-9864
  • Medina-Rull, Alberto|||0000-0003-4691-0328
  • Feijoo, Pedro Carlos|||0000-0002-7653-4573
  • Pacheco-Sanchez, Anibal|||0000-0002-0897-0605
  • Marin, Enrique G.|||0000-0002-0302-3764
  • Garcia Ruiz, Francisco J.|||0000-0003-4659-2454
  • Rodriguez, Noel|||0000-0002-6032-6921
  • Godoy Medina, Andres|||0000-0002-3014-8765
  • Jiménez, David|||0000-0002-8148-198X
The Dirac voltage of a graphene field-effect transistor (GFET) stands for the gate bias that sets the charge neutrality condition in the channel, thus resulting in a minimum conductivity. Controlling its dependence on the terminal biases is crucial for the design and optimization of radio-frequency applications based on multiple GFETs. However, the previous analysis of such dependence carried out for single devices is uncomplete and if not properly understood could result in circuit designs with poor performance. The control of the Dirac point shift (DPS) is particularly important for the deployment of graphene-based differential circuit topologies where keeping a strict symmetry between the electrically balanced branches is essential for exploiting the advantages of such topologies. This note sheds light on the impact of terminal biases on the DPS in a real device and sets a rigorous methodology to control it so to eventually optimize and exploit the performance of radio-frequency applications based on GFETs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunability Properties and Compact Modeling of HfO2-Based Complementary Resistive Switches Using a Three-Terminal Subcircuit

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Poblador, S.|||0000-0003-4044-6990
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
Complementary resistive switching (CRS) arises when two bipolar-mode memristive devices are antiserially connected, forming a single functional structure. The combined effect of both memristors leads to the appearance of high (HRS) and low (LRS) resistance windows in the current-voltage (I-V) characteristic that finds application in fields such as neuromorphic computing and logic circuits. In this work, the electric behavior of HfO2-based CRS devices intentionally fabricated with a common central electrode is investigated both from experimental and modeling viewpoints. Experiments reveal that the maximum voltage applied to the structure allows tuning the amplitude of the resistance window following a self-balance dynamics. The origin of the abrupt (digital) and gradual (analog) transitions between the HRS and LRS states is elucidated through the inclusion of the snapback and snapforward effects in the switching dynamics. TheI-Vcharacteristics of the CRS devices are compact modeled with two opposite-biased memdiodes and simulated in LTSpice using an equivalent three-terminal subcircuit. It is shown that the proposed model is able to reproduce with a high degree of accuracy not only the observed CRS behavior for HfO2 but also the main features exhibited by devices with a wide variety of oxide/electrode materials.
RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Artículo científico (JournalArticle)

A Product Channel Attack to Wireless Physical Layer Security

  • Anaya López, Gonzalo Javier
  • Gómez-Paredes, Gerardo
  • López-Martínez, Francisco Javier
https://openpolicyfinder.jisc.ac.uk/id/publication/23590, We propose a novel attack that compromises the physical layer security in wireless systems with eavesdropper's channel state information at the transmitter side. This technique is based on the transmission of a slowly-varying random symbol by the eavesdropper during its uplink transmission, so that the equivalent fading channel observed at the base station (BS) has a larger variance. Then, the BS designs the secure downlink transmission under the assumption that the eavesdropper's channel experiences a larger fading severity than in reality. We show that this approach can lead the BS to transmit to Bob at a rate larger than the secrecy capacity, thus compromising the system secure operation. Our analytical results, corroborated by simulations, show that the use of multiple antennas at the BS may partially alleviate but not immunize against these type of attacks., Unión Europea, Junta de Andalucía, Universidad de Málaga, Gobierno de España
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Optimized Update/Prediction Assignment for Lifting Transforms on Graphs

  • Martínez Enríquez, Eduardo
  • Cid Sueiro, Jesús
  • Díaz de María, Fernando
  • Ortega Gómez, Román Antonio
Transformations on graphs can provide compact representations of signals with many applications in denoising, feature extraction or compression. In particular, lifting transforms have the advantage of being critically sampled and invertible by construction, but the efficiency of the transform depends on the choice of a good bipartition of the graph into update (U) and prediction (P) nodes. This is the update/prediction (U=P) assignment problem, which is the focus of this paper. We analyze this problem theoretically and derive an optimal U=P assignment under assumptions about signal model and filters. Furthermore, we prove that the best U=P partition is related to the correlation between nodes on the graph and is not the one that minimizes the number of conflicts (connections between nodes of same label) or maximizes the weight of the cut. We also provide experimental results in randomly generated graph signals and real data from image and video signals that validate our theoretical conclusions, demonstrating improved performance over state of the art solutions for this problem., This work was supported in part by NSF under Grant CCF-1018977 and in part by the Spanish Ministry of Economy and Competitiveness under Grants TEC2014-53390-P, TEC2014-52289-R, TEC2016-81900-REDT/AEI and TEC2017-83838-R, Publicado
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Efficient scale-adaptive license plate detection system

  • Molina Moreno, Miguel
  • González Díaz, Iván
  • Díaz de María, Fernando
License plate detection is a common problem in traffic surveillance applications. Although some solutions have been proposed in the literature, their success is usually restricted to very specific scenarios, with their performance dropping in more demanding conditions. One of the main challenges to be addressed for this kind of systems is the varying scale of the license plates, which depends on the distance between the vehicles and the camera. Traditionally, systems have handled this issue by sequentially running single-scale detectors over a pyramid of images. This approach, although simplifies the training process, requires as many evaluations as considered scales, which leads to running times that grow linearly with the number of scales considered. In this paper, we propose a scale-adaptive deformable part-based model which, based on a well-known boosting algorithm, automatically models scale during the training phase by selecting the most prominent features at each scale and notably reduces the test detection time by avoiding the evaluation at different scales. In addition, our method incorporates an empirically constrained-deformation model that adapts to different levels of deformation shown by distinct local features within license plates. As shown in the experimental section, the proposed detector is robust and scale and perspective independent and can work in quite diverse scenarios. Experiments on two datasets show that the proposed method achieves a significantly better performance in comparison with other methods of the state of the art., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Grant TEC2014-53390-P and Grant TEC2017-84395-P and in part by the Spanish Department of Traffic, Spanish Ministry of Home Affairs, under Grant SPIP2014-1507.
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Patients at high risk of suicide before and during a COVID-19 lockdown: ecological momentary assessment study

  • Cobo Aguilera, Aurora
  • Porras-Segovia, Alejandro
  • Pérez-Rodríguez, Mercedes
  • Artés Rodríguez, Antonio
  • Barrigón Estévez, María Luisa
  • Courtet, Philippe
  • Baca García, Enrique
The coronavirus disease 2019 (COVID-19) outbreak may have affected the mental health of patients at high risk of suicide. In this study we explored the wish to die and other suicide risk factors using smartphone-based ecological momentary assessment (EMA) in patients with a history of suicidal thoughts and behaviour. Contrary to our expectations we found a decrease in the wish to die during lockdown. This is consistent with previous studies showing that suicide rates decrease during periods of social emergency. Smartphone-based EMA can allow us to remotely assess patients and overcome the physical barriers imposed by lockdown., This study received grant support from Instituto de Salud Carlos III (ISCIII PI13/02200; PI16/ 01852; CM19/00026), Delegación del Gobierno para el Plan Nacional de Drogas (20151073), the American Foundation for Suicide Prevention (LSRG-1-005-16), the Ministerio de Ciencia, Innovación y Universidades (RTI2018-099655-B-I00; TEC2017-92552-EXP) and by the Comunidad de Madrid (Y2018/TCS-4705, PRACTICO-CM).
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Large-signal modulation in distributed feedback quantum cascade lasers for coherent multiharmonic signal generation

  • Jerez González, Borja
  • Szedlak, Rolf
  • Martín Mateos, Pedro
  • Dios Fernández, Cristina de
  • Acedo Gallardo, Pablo
  • Strasser, Gottfied
In this Letter, an experimental analysis for coherent multiharmonic signal generation in quantum cascade lasers is presented. The underlying principle relies on the direct modulation of the laser with a large sinusoidal wave to drive the laser above and below threshold. This generates a multiharmonic optical signal in the frequency domain as the device is forced to respond in a nonlinear fashion. The impact of the modulation parameters is assessed in the resultant optical spectrum of a continuous-wave distributed feedback quantum cascade laser. Despite not creating pulses due to the ultrafast dynamics of the laser, the results reveal that a comb structure with uniform line spacing and high phase correlation between teeth can be straightforwardly generated., B.J., P.M.-M., C.D. and P.A. would like to thank the Spanish Ministry of Economy, Industry and Competitiveness for supporting the project under the TEC2017-86271-R Grant. R.S. and G.S. acknowledge the support by the Austrian Science Fund (FWF) Project #49 (Next-Lite). The work by B.J. has been performed in the frame of an FPU Program, #FPU014/06338 and a Mobility Aids for Short Stays and Temporal Transfers Program, #EST16/00172, both granted by the Spanish Ministry of Education, Culture and Sports
e-Archivo. Repositorio Institucional de la Universidad Carlos III de Madrid
Publicación Artículo científico (JournalArticle)

Advanced Statistical Techniques for Noninvasive Hyperglycemic States Detection in Mice Using Millimeter-Wave Spectroscopy

  • Moreno Oyervides, Aldo Luis
  • Aguilera Morillo, María del Carmen
  • Larcher Laguzzi, Fernando
  • Krozer, Viktor
  • Acedo Gallardo, Pablo
In this article, we discuss the use of advanced statistical techniques (functional data analysis) in millimeter-wave (mm-wave) spectroscopy for biomedical applications. We employ a W-band transmit-receive unit with a reference channel to acquire spectral data. The choice of the W-band is based on a tradeoff between penetration through the skin providing an upper bound for the frequencies and spectral content across the band. The data obtained are processed using functional principal component logit regression (FPCLoR), which enables to obtain a predictive model for sustained hyperglycemia, typically associated with diabetes. The predictions are based on the transmission data from noninvasive mm-wave spectrometer at W-band. We show that there exists a frequency range most suitable for identification, classification, and prediction of sustained hyperglycemia when evaluating the functional parameter of the functional logit model (β). This allows for the optimization of the spectroscopic instrument in the aim to obtain a compact and potential low-cost noninvasive instrument for hyperglycemia assessment. Furthermore, we also demonstrate that the statistical tools alleviate the problem of calibration, which is a serious obstacle in similar measurements at terahertz and IR frequencies.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of bonding on the performance of optical fiber strain sensors

  • Floris, Ignazio
  • Sangiorgio, Valentino
  • Uva, Giuseppina
  • Rapido, Monica
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
[EN] The structural health monitoring (SHM) of existing buildings, structures, and infrastructures has become increasingly important in recent years, while the interest of the scientific community is focused on the use of new high-performance technologies. Fiber optic sensors have become particularly attractive, thanks to their potential for monitoring strain in smart structures. The performance of this new technology depends to a large extent on the bonding technique used for its manufacture. Although the related literature has identified a correlation between some efficiency issues and the geometrical parameters of the bonding and mechanical properties of the materials adopted, the phenomenon is still not completely understood. This paper describes an in-depth study of the geometrical and mechanical parameters that influence the efficiency of optical fiber point sensors' surface bonding by synergistically related techniques such as computational simulation, experimental tests, sensor manufacturing, and data analysis. The paper's novelty is fourfold: (1) the investigation of the strain transfer mechanism of surface-bonded fiber optic sensors by considering, for the first time, all the parameters influencing the phenomenon through a considerable number of finite element (FE) analyses (117 three-dimensional FE models); (2) the development of a series of bonding efficiency predictive models; (3) the design of a specific laboratory test to validate the computational outcomes; and (4) the definition of useful guidelines for effective bonding manufacturing in order to maximize the performance of these sensors when acquiring monitoring data., Project Manufacturing Education and Training Governance Model; Universitat Politecnica de Valencia, Grant/Award Number: PAID-01-18; Spanish Ministry of Economy and Competitiveness, Grant/Award Number: DIMENSION TEC2017-88029-R; H2020 Marie SklodowskaCurie Actions, Grant/Award Number: 722509
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic capacity provision for wireless sensors connectivity: A profit optimization approach

  • Sanchis-Cano, Ángel
  • Condoluci, Massimo
  • Guijarro, Luis|||0000-0001-9774-9728
[EN] We model a wireless sensors' connectivity scenario mathematically and analyze it using capacity provision mechanisms, with the objective of maximizing the profits of a network operator. The scenario has several sensors' clusters with each one having one sink node, which uploads the sensing data gathered in the cluster through the wireless connectivity of a network operator. The scenario is analyzed both as a static game and as a dynamic game, each one with two stages, using game theory. The sinks' behavior is characterized with a utility function related to the mean service time and the price paid to the operator for the service. The objective of the operator is to maximize its profits by optimizing the network capacity. In the static game, the sinks' subscription decision is modeled using a population game. In the dynamic game, the sinks' behavior is modeled using an evolutionary game and the replicator dynamic, while the operator optimal capacity is obtained solving an optimal control problem. The scenario is shown feasible from an economic point of view. In addition, the dynamic capacity provision optimization is shown as a valid mechanism for maximizing the operator profits, as well as a useful tool to analyze evolving scenarios. Finally, the dynamic analysis opens the possibility to study more complex scenarios using the differential game extension., The author(s) disclosed receipt of the following financial support for the research, authorship, and/or publication of this article: This work was supported by the Spanish Ministry of Economy and Competitiveness through project TIN2013-47272-C2-1-R; AEI/FEDER, UE through project TEC2017-85830-C2-1-P; and co-supported by the European Social Fund BES-2014-068998.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Parallelization of an algorithm for automatic classification of medical data

  • García Mollá, Víctor Manuel|||0000-0003-4768-7367
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vidal Maciá, Antonio Manuel
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Safont Armero, Gonzalo
In this paper, we present the optimization and parallelization of a state-of-the-art algorithm for automatic classification, in order to perform real-time classification of clinical data. The parallelization has been carried out so that the algorithm can be used in real time in standard computers, or in high performance computing servers. The fastest versions have been obtained carrying out most of the computations in Graphics Processing Units (GPUs). The algorithms obtained have been tested in a case of automatic classification of electroencephalographic signals from patients., This work was supported by Spanish Administration (Ministerio de Economía y Competitividad) and European Union (FEDER) under grants TEC2014-58438-R and TEC2017-84743-P; and Generalitat Valenciana under grants PROMETEO II/2014/032 and PROMETEO II/2014/003.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Contribution to the Channel Path Loss and Time-Dispersion Characterization in an Office Environment at 26 GHz

  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • TORRES JIMÉNEZ, RAFAEL PEDRO
  • Pérez, Jesús R.
  • FERNÁNDEZ GONZÁLEZ, HERMAN ANTONIO
  • Molina-García-Pardo, José María
[EN] In this paper, path loss and time-dispersion results of the propagation channel in a typical office environment are reported. The results were derived from a channel measurement campaign carried out at 26 GHz in line-of-sight (LOS) and obstructed-LOS (OLOS) conditions. The parameters of both the floating-intercept (FI) and close-in (CI) free space reference distance path loss models were derived using the minimum-mean-squared-error (MMSE). The time-dispersion characteristics of the propagation channel were analyzed through the root-mean-squared (rms) delay-spread and the coherence bandwidth. The results reported here provide better knowledge of the propagation channel features and can be also used to design and evaluate the performance of the next fifth-generation (5G) networks in indoor office environments at the potential 26 GHz frequency band., This work was funded in part by the Spanish Ministerio de Economia, Industria y Competitividad under the research projects TEC2016-78028-C3-2-P, TEC2017-86779-C2-1-R, and TEC2017-86779-C2-2-R, and by COLCIENCIAS in Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Empirical characterisation of the indoor multi-user MIMO channel in the 3.5 GHz band

  • Torres, Rafael P.
  • Pérez, Jesús R.
  • Basterrechea, José
  • Domingo, Marta
  • Valle, Luis
  • González, Jorge
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] This study presents an analysis of the capabilities of using multi-user multiple input multiple output (MU-MIMO) in indoor environments at the 3-4 GHz band through an empirical characterisation of the MU-MIMO channel, obtaining a statistical description of the degree to which this specific multi-user channel verifies the condition of 'favourable propagation'. Different metrics have been considered to measure the degree of orthogonality between the channels, such as the orthogonality coefficient or the condition number. In addition, in order to obtain a direct measure of the goodness of the channel in terms of the achievable spectral efficiency, the capacity of the channel has been calculated for different numbers of users and base station antennas and compared with theoretical i.i.d. Rayleigh channels., This work has been supported by the Spanish Ministerio de Economia, Industria y Competitividad under the projects TEC2017-86779-C2-1-R and TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Millimeter Wave Channel Measurements in an Intra-Wagon Environment

  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • Molina-García-Pardo, José María
  • JUAN LLACER, LEANDRO
  • PASCUAL GARCIA, JUAN
  • Sanchis Borrás, Concepción
[EN] In this correspondence, useful measurement results of the propagation channel characteristics in an intra-wagon environment at millimeter wave (mmWave) frequencies are presented. The measurements were collected inside an underground convoy from 25 to 40 GHz in the frequency domain. A broadband radio over fiber (RoF) link was used in order to avoid the high losses introduced by cables at these frequencies, thus allowing long distances between the transmitter and receiver antennas. Values of the path loss exponent and delay spread are reported at the potential 26, 28 and 38 GHz bands to deploy the future fifth-generation (5G) systems. These results allow us to have a better knowledge of the path loss and time dispersion characteristics of the propagation channel in this particular environment, characterized by rich-scattering with long delays., This work was supported by the Ministerio de Economia, Industria y Competitividad of the Spanish Government under the National Projects TEC2016-78028-C3-2-P and TEC2017-86779-C2-2-R, through the Agencia Estatal de Investigacion (AEI) and the Fondo Europeo deDesarrollo Regional (FEDER). The review of this article was coordinated by Prof. J. F. Paris. The authors would like to thank the staff of FGV who have facilitated the realization of the measurements campaing, in particular J. Iserte Villalba and F. M. Brox López.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fast Incoherent OFDR Interrogation of FBG Arrays Using Sparse Radio Frequency Responses

  • Clement, J.
  • Hervás-Peralta, Javier
  • Maestre, H
  • Torregrosa, G.
  • Fernandez-Pousa, Carlos R.
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We present two implementations of fast, discrete incoherent optical frequency-domain reflectometers (I-OFDR) for the interrogation of equally spaced fiber Bragg grating (FBG) arrays, based on the determination of the array's radio frequency (RF) response at a sparse number of frequencies. FBG reflectivities are determined by use of the inverse discrete Fourier transform (IDFT) of the sparse RF response, in a dynamic range limited by crosstalk induced by FBG positioning errors. The first implementation employs the complete, vector RF response at a number of frequencies equal to the number N of FBGs in the array. In the second, the introduction of a reference reflector allows for an interrogation using the power (phaseless) RF response in 4N - 1 frequencies. Demodulation based on IDFT leads to total interrogation times determined by the network analyzer scan time, which can be as low as 10 mu s per FBG. Depending on the interrogation technique, electrical bandwidth requirements are 12 GHz in our array with 10-cm separation. We implemented both techniques in a N = 10 array, inducing decays in reflectivity by 10 dB in one or several FBGs. Unambiguous detection of FBG decays was obtained in both interrogation methods. Additional tests performed on the measured reflectivities also show that measurement linearity is preserved in the 10-dB decay range. As discrete I-OFDR systems, the proposed techniques show the possibility to reach compromises between interrogation time and dynamic range or accuracy in reflectivity measurements, using the number of interrogation frequencies and the sensor topology., This work was supported in part by Infraestructura GVA-FEDER operative program 2007-2013 and in part by the Spanish MINECO through Project TEC2017-88029-R. The work of J. Clement Bellido was supported by the GVA VALi+d scholarship ACIF/2016/214. The work of J. Hervas was supported by the Spanish MEC scholarship FPU13/04675.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Estudio, diseño e implementación de sensores de fibra óptica para monitorización de estructuras complejas

  • Maldonado-Hurtado, Daniel Gustavo|||0000-0001-8585-0271
[ES] El uso creciente de materiales compuestos en aplicaciones de estructuras complejas responde a la necesidad de reducir el peso, mejorar la eficiencia energética y aumentar la fiabilidad en diversos sectores. No obstante, la complejidad de sus procesos de fabricación y de su comportamiento en servicio introduce retos relevantes en el control del proceso, la garantía de la calidad y la evaluación de la integridad estructural. En este contexto, la sensorización mediante fibra óptica emerge como una solución especialmente adecuada, al permitir la integración de sistemas de monitorización embebidos, ligeros y robustos. En esta tesis se estudiaron y desarrollaron soluciones basadas en sensores de fibra óptica aplicadas a materiales compuestos, demostrando su utilidad tanto durante la fabricación como en la monitorización estructural en servicio. Se implementaron sistemas capaces de seguir la evolución térmica o mecánica de laminados y perfiles compuestos durante distintos procesos industriales, incluyendo el curado convectivo y por microondas de CFRP; y se validaron parámetros de proceso como gradientes térmicos interlaminares, desviaciones operativas no previstas, tensiones residuales y respuestas no lineales, aspectos críticos para el diseño de ciclos de fabricación robustos. La integración de sensores de fibra óptica se demostró viable en diversos materiales y procesos. En perfiles estructurales fabricados por pultrusión, los sensores sobrevivieron al procesado, registraron correctamente la carga y permitieron medir deformaciones elevadas. En compuestos termoplásticos reforzados con fibra continua, la instrumentación permitió monitorizar la consolidación y reconstruir con alta precisión la forma del perfil bajo carga. Asimismo, el análisis de la respuesta espectral de las redes de Bragg en fibra se consolidó como una herramienta para la detección de heterogeneidades de deformación y de daño incipiente. De forma complementaria, se exploró el desarrollo de fibras ópticas elastoméricas basadas en poliuretano termoplástico, orientadas a aplicaciones de alta sensibilidad. Estas fibras permitieron implementar sensores simples basados en la modulación de la intensidad para medir cargas y vibraciones. Finalmente, se desarrolló una metodología de procesado de señal para sensores interferométricos de fibra óptica basada en la Transformada de Hilbert, que permitió eliminar de forma robusta la ambigüedad en la medición del índice de refracción y configuraciones multipunto y multiparámetro. Se demostró, además, que el uso de redes de Bragg de baja reflectividad mejora la visibilidad interferométrica en las muestras objetivo, lo que incrementa la resolución del sensor. En conjunto, este trabajo confirma el potencial de la fibra óptica como tecnología habilitadora para estructuras complejas, proporcionando herramientas fiables y escalables para el control de proceso, la monitorización estructural y el mantenimiento predictivo de materiales compuestos., [CA] L'ús creixent de materials compostos en aplicacions d'estructures complexes respon a la necessitat de reduir el pes, millorar l'eficiència energètica i augmentar la fiabilitat en diversos sectors. No obstant això, la complexitat dels seus processos de fabricació i del seu comportament en servei introdueix reptes rellevants en el control del procés, la garantia de la qualitat i l'avaluació de la integritat estructural. En aquest context, la sensorizació mitjançant fibra òptica emergeix com una solució especialment adequada, ja que permet la integració de sistemes de monitorització embeguts, lleugers i robustos. En esta tesi s'han estudiat i desenvolupat solucions basades en sensors de fibra òptica aplicades a materials compostos, demostrant la seua utilitat tant durant la fabricació com en la monitorització estructural en servei. S'han implementat sistemes capaços de seguir l'evolució tèrmica o mecànica de laminats i perfils compostos durant diferents processos industrials, incloent el curat convectiu i per microones de CFRP. S'han validat paràmetres de procés com ara gradients tèrmics interlaminars, desviacions operatives no previstes, tensions residuals i respostes no lineals, aspectes crítics per al disseny de cicles de fabricació robustos. La integració de sensors de fibra òptica s'ha demostrat viable en diversos materials i processos. En perfils estructurals fabricats per pultrusió, els sensors van sobreviure al processat, van transmetre correctament la càrrega mecànica i van permetre mesurar deformacions elevades. En materials termoplàstics reforçats amb fibra contínua, la instrumentació va permetre monitoritzar la consolidació i reconstruir amb alta precisió la forma del perfil sota càrrega. A més, l'anàlisi de la resposta espectral de les xarxes de Bragg en fibra s'ha consolidat com una eina eficaç per a la detecció d'heterogeneïtats de deformació i de dany incipient. De manera complementària, s'ha explorat el desenvolupament de fibres òptiques elastomèriques basades en poliuretà termoplàstic, orientades a aplicacions d'alta sensibilitat. Estes fibres han permés implementar sensors senzills basats en la modulació de la intensitat per a la mesura de càrregues i vibracions. Finalment, s'ha desenvolupat una metodologia de processament de senyal per a sensors interferomètrics de fibra òptica basada en la Transformada de Hilbert, que ha permés eliminar de manera robusta l'ambigüitat en la mesura de l'índex de refracció i implementar configuracions multipunt i multiparamètriques. A més, s'ha demostrat que l'ús de xarxes de Bragg de baixa reflectivitat millora la visibilitat interferomètrica en les mostres objectiu, incrementant així la resolució del sensor. En conjunt, este treball confirma el potencial de la fibra òptica com a tecnologia habilitadora per a estructures complexes, proporcionant eines fiables i escalables per al control del procés, la monitorització estructural i el manteniment predictiu de materials compostos., [EN] The increasing use of composite materials in complex structural applications addresses the need to reduce weight, improve energy efficiency, and enhance reliability across various sectors. However, the complexity of their manufacturing processes and in-service behaviour introduces significant challenges in process control, quality assurance, and structural integrity assessment. In this context, fibre optic sensing emerges as a particularly suitable solution, as it enables the integration of embedded, lightweight, and robust monitoring systems. In this thesis, fibre optic sensor-based solutions applied to composite materials were studied and developed, demonstrating their usefulness both during manufacturing and for in-service structural monitoring. Systems were implemented to track the thermal and mechanical evolution of composite laminates and profiles during various industrial processes, including the conventional and microwave curing of CFRP. Process-related parameters, such as interlaminar thermal gradients, unforeseen operational deviations, residual stresses, and nonlinear responses, were identified and validated, all of which are critical for designing robust manufacturing cycles. The integration of fibre optic sensors has been shown to be viable across various materials and processes. In structural profiles manufactured by pultrusion, the sensors survived processing, correctly transferred mechanical load, and enabled the measurement of high strain levels. In continuous fibre-reinforced thermoplastic composites, the instrumentation enabled consolidation monitoring and high-accuracy shape reconstruction under load. In addition, analysis of the spectral response of fibre Bragg gratings was consolidated as an effective tool for detecting deformation heterogeneities and early-stage damage. Complementarily, the development of elastomeric optical fibres based on thermoplastic polyurethane was explored for high-sensitivity applications. These fibres enabled the implementation of simple sensors based on intensity modulation for load and vibration measurements. Finally, a signal processing methodology for interferometric fibre optic sensors based on the Hilbert Transform was developed, enabling robust elimination of ambiguity in refractive index measurements and the implementation of multipoint and multiparametric configurations. It was further demonstrated that the use of low reflectivity fibre Bragg gratings improves interferometric visibility in the target samples, thereby increasing sensor resolution. Overall, this work confirms the potential of fibre optics as an enabling technology for complex structures, providing reliable and scalable tools for process control, structural monitoring, and predictive maintenance of composite materials., Agradezco también al Ministerio de Ciencia, Innovación y Universidades, a la Agencia Estatal de Investigación y a la Unión Europea el apoyo financiero recibido a través de la ayuda predoctoral de Formación de Personal Investigador PRE2018-085654 asociada al proyecto TEC2017-88029-R, y del proyecto “SMARTMOORING” (CETP-2022-00382 / PCI2023-145987-2), cuyo respaldo ha sido esencial para llevar a cabo esta tesis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Efficiency Analysis of a Truncated Flip-FBMC in Burst Optical Transmission

  • Bahaaelden, Mohammed S.
  • Pérez-Jiménez, Rafael
  • Renfors, Markku
  • Ortega Tamarit, Beatriz|||0000-0003-1196-4756
[EN] A novel Flip-filter bank multicarrier (Flip-FBMC)-based transmultiplexer (TMUX) with offset quadrature amplitude modulation is proposed to enhance the transmission performance compared to a conventional Flip-OFDM system. Moreover, the possibility to reduce the TMUX response (latency) and increase spectral efficiency is investigated for the first time through a tail shortening method. The proposed design is based on a biorthogonal form for visible light communication (VLC) to increase the flexibility of design requirements. However, spectral efficiency suffers from the ramp-up and the ramp-down at the beginning and end, respectively, of a data burst. Hence, as a penalty, Flip-FBMC imposes 9 more symbols than a Flip-OFDM packet and two factors compared to a DCO-FBMC burst. Hard truncation of the lowest energy tail minimizes latency and limits the system penalty to 2.5 symbols, which is lower than that of DCO-FBCM by 2 symbols. The results show that the prototype filter of the Heisenberg factor ( ¿1 ) is highly effective in reducing the energy loss of truncated tails and reduces the symbol error rate (SER). The Flip-FBMC gain over a direct line-of-sight VLC channel is analyzed, and the channel estimation of a truncated burst, which is based on the interference approximation method (IAM) of IAM-C type, exhibits a superior performance of 1.5 dB at 10 ¿3 SER over the IAM-R method and 1 dB at 10 ¿5 SNR over a cyclic prefix of 1 point Flip-OFDM. On the other hand, the analysis reveals that IAM-C is slightly impacted by the truncated burst compared to the nontruncated version., This work was supported in part by the Research Agency under Project RTI2018-101658-B-I00 and Project TEC2017-84065-C3-1-R, in part by the European Cooperation in Science and Technology COST Action "European Network on Future Generation Optical Wireless Communication Technologies (NEWFOCUS)'' under Grant CA19111, and in part by Generalitat Valenciana under Grant PROMETEO 2017/103.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Un método para la separación del desvanecimiento a corto y largo plazo en comunicaciones vehiculares

  • Chakkour, Yousra
  • FERNÁNDEZ GONZÁLEZ, HERMAN ANTONIO
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Reig, Juan|||0000-0003-4541-9326
[EN] In this contribution, we present a method for estimating the optimal size of moving average filter to ensure a precise separation of small and large scale fading effects. The analysis of small and large scale fading of the Vehicle-to-Vehicle (V2V) measured channel has been performed from narrowband channel measurements carried out in an urban environment at 5.9 GHz. Uniform intervals, where the channel process can be considered stationary, have been identified by comparing the cumulative distribution function (CDF) of the received envelope. A relationship between the length of the uniform intervals and the velocity of vehicles has been found. Moreover, the Rice K factor has been estimated for each one of these intervals. Our results showed that the proposed method is adequate to carry out a small and large scale fading separation. The results obtained make its use interesting to process correctly measured data in vehicular environments., Este trabajo ha sido financiado por el Ministerio de Economía, Industria y Competitividad de España a través del proyecto TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Graded-index optical fiber emulator of an interacting three-atom system: illumination control of particle statistics and classical non-separability

  • Garcia March, Miguel Angel|||0000-0001-7092-838X
  • Harshman, N.L.
  • da Silva, H.
  • Fogarty, T.
  • Busch, Th.
  • Lewenstein, M.
  • FERRANDO, A.
[EN] We show that a system of three trapped ultracold and strongly interacting atoms in one-dimension can be emulated using an optical fiber with a graded-index profile and thin metallic slabs. While the wave-nature of single quantum particles leads to direct and well known analogies with classical optics, for interacting many-particle systems with unrestricted statistics such analoga are not straightforward. Here we study the symmetries present in the fiber eigenstates by using discrete group theory and show that, by spatially modulating the incident field, one can select the atomic statistics, i.e., emulate a system of three bosons, fermions or two bosons or fermions plus an additional distinguishable particle. We also show that the optical system is able to produce classical non-separability resembling that found in the analogous atomic system., Spanish Ministry MINECO (National Plan15 Grant: FISICATEAMO No. FIS2016-79508-P, FPI); European Social Fund; Fundacio Cellex; Generalitat de Catalunya (AGAUR Grant No.2017, SGR 1341, and CERCA Program); European Commission (ERC AdG OSYRIS, EU FET-PRO QUIC); National Science Centre, Poland Symfonia (Grant No. 2016/20/W/ST4/00314); TF acknowledges support under JSPS KAKENHI-18K13507, TB and TF acknowledge support from the Okinawa Institute of Science and Technology Graduate University; A.F. acknowledges the Spanish MINECO Project No. TEC2017-86102-C2-1) and Generalitat Valenciana (Prometeo/2018/098); MAGM acknowledges funding from the Spanish Ministry of Education and Vocational Training (MEFP) through the Beatriz Galindo program 2018 (BEAGAL18/00203).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Log-moment estimators of the Nakagami-lognormal distribution

  • Reig, Juan|||0000-0003-4541-9326
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Brennan, Conor
[EN] In this paper, estimators of the Nakagami-lognormal (NL) distribution based on the method of log-moments have been derived and thoroughly analyzed. Unlike maximum likelihood (ML) estimators, the log-moment estimators of the NL distribution are obtained using straightforward equations with a unique solution. Also, their performance has been evaluated using the sample mean, confidence regions and normalized mean square error (NMSE). The NL distribution has been extensively used to model composite small-scale fading and shadowing in wireless communication channels. This distribution is of interest in scenarios where the small-scale fading and the shadowing processes cannot be easily separated such as the vehicular environment., This work has been funded in part by the Programa de Estancias de Movilidad de Profesores e Investigadores en Centros Extranjeros de Ensenanza Superior e Investigacion of the Ministerio de Educacion, Cultura y Deporte, Spain, PR2015-00151 and by the Ministerio de Economia, Industria y Competitividad of the Spanish Government under the national project TEC2017-86779-C2-2-R, through the Agencia Estatal de Investigacion (AEI) and the Fondo Europeo de Desarrollo Regional (FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A New Surrogating Algorithm by the Complex Graph Fourier Transform (CGFT)

  • Belda, Jordi
  • Safont Armero, Gonzalo
  • Parcheta, Zuzanna
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
[EN] The essential step of surrogating algorithms is phase randomizing the Fourier transform while preserving the original spectrum amplitude before computing the inverse Fourier transform. In this paper, we propose a new method which considers the graph Fourier transform. In this manner, much more flexibility is gained to define properties of the original graph signal which are to be preserved in the surrogates. The complex case is considered to allow unconstrained phase randomization in the transformed domain, hence we define a Hermitian Laplacian matrix that models the graph topology, whose eigenvectors form the basis of a complex graph Fourier transform. We have shown that the Hermitian Laplacian matrix may have negative eigenvalues. We also show in the paper that preserving the graph spectrum amplitude implies several invariances that can be controlled by the selected Hermitian Laplacian matrix. The interest of surrogating graph signals has been illustrated in the context of scarcity of instances in classifier training., This research was funded by the Spanish Administration and the European Union under grant TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Eficiencia espectral y capacidad en un canal MIMO masivo con alta densidad de usuarios

  • Alejandro Rodríguez Aparicio
  • Jesús R. Pérez
  • Luis Valle
  • TORRES JIMÉNEZ, RAFAEL PEDRO
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] This paper presents an analysis of the massive MIMO channel in an indoor picocell with a high number of active user terminals. The analysis is based on the results of a measurement campaign carried out in the 3.2 to 4 GHz band in a scenario of reduced size, in which users (up to 20) are placed in an orderly manner. In order to evaluate the performance of the resulting massive MIMO channel, results concerning both the sum capacity as well as the spectral efficiency are included. Furthermore and concerning the channel spectral efficiency, an analysis showing the spread and differences between the individual contributions of each active user is reported and discussed., Este trabajo ha sido financiado por los proyectos del Plan Estatal de Investigación Científica y Técnica y de Innovación TEC2017-86779-C2-1-R y TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Refractive Index and Temperature Sensing Using Inter-Core Crosstalk in Multicore Fibers

  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Multicore optical fibers are of great interest in the optical sensing field. Their core diversity and spatial distribution enable the development of sensing mechanisms that are not possible in single-core fibers. In this paper, we study the use of the inter-core crosstalk phenomena for the implementation of a surrounding refractive index (SRI) sensor. The selective inscription of a tilted fiber Bragg grating (TFBG) intentionally increases the inter-core crosstalk between the inscribed cores and makes it sensitive to the SRI. With this technique we simplify the measurement of the SRI and improve the identification and tracking of the excited cladding modes, as compared with the analysis of the transmission spectrum of a TFBG in single-core fibers. The proposed device is also sensitive to temperature. Temperature is obtained from the crosstalk wavelength shift with a measured sensitivity of 9.75 pm/degrees C. The SRI is obtained from the measurement of the crosstalk optical power. For increasing SRIs the cladding modes gradually fade, reducing the crosstalk optical power. We observed that the higher the tilt, the higher the sensor sensitivity. For a 7 degrees TFBG the SRI sensitivity obtained is -74.2 dB/RIU from 1.31 to 1.39 and -250.8 dB/RIU from 1.39 to 1.44., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under the DIMENSION TEC2017 88029-R Project and in part by the Generalitat Valenciana by PROMETEO 2017/103 research excellency award and IDI/FEDER/2018 GVA Infraestructura. The work of J. Madrigal was supported by Universitat Politecnica de Valencia scholarship PAID-01-18. The work of D. Barrera was supported by Spanish MICINN fellowship IJCI-2017-32476.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Estimation of the Number of Endmembers in Hyperspectral Images Using Agglomerative Clustering

  • Prades Nebot, José|||0000-0003-4489-3704
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Safont Armero, Gonzalo
[EN] Many tasks in hyperspectral imaging, such as spectral unmixing and sub-pixel matching, require knowing how many substances or materials are present in the scene captured by a yperspectral image. In this paper, we present an algorithm that estimates the number of materials in the scene using agglomerative clustering. The algorithm is based on the assumption that a valid clustering of the image has one cluster for each different material. After reducing the dimensionality of the hyperspectral image, the proposed method obtains an initial clustering using K-means. In this stage, cluster densities are estimated using Independent Component Analysis. Based on the K-means result, a model-based agglomerative clustering is performed, which provides a hierarchy of clusterings. Finally, a validation algorithm selects a clustering of the hierarchy; the number of clusters it contains is the estimated number of materials. Besides estimating the number of endmembers, the proposed method can approximately obtain the endmember (or spectrum) of each material by computing the centroid of its corresponding cluster. We have tested the proposed method using several hyperspectral images. The results show that the proposed method obtains approximately the number of materials that these images contain., This work was supported by Spanish Administration (Ministerio de Ciencia, Innovacion y Universidades) and European Union (FEDER) under grant TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vector Score Alpha Integration for Classifier Late Fusion

  • Safont Armero, Gonzalo
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
[EN] Alpha integration is a family of integrators that encompasses many classic fusion operators (e.g., mean, product, minimum, maximum) as particular cases. This paper proposes vector score integration (VSI), a new alpha integration method for late fusion of multiple classifiers considering the joint effect of all the classes of the multi-class problem. Theoretical derivations to optimize the parameters of VSI for achieving the minimum probability of error are provided. VSI was applied to two classification tasks using electroencephalographic signals. The first task was the automatic stage classification of a neuropsychological test performed by epileptic subjects and the second one was the classification of sleep stages from apnea patients. Four single classifiers (linear and quadratic discriminant analysis, naive Bayes, and random forest) and three competitive fusion methods were estimated for comparison: mean, majority voting, and separated score integration (SSI). SSI is based on alpha integration, but unlike the proposed method, it considers the scores from each class in isolation, not accounting for possible dependencies among scores corresponding to different classes. VSI was able to optimally combine the results from all the single classifiers, in terms of accuracy and kappa coefficient, and outperformed the results of the other fusion methods in both applications., This work was supported by the Spanish Administration and European Union under grant TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A proxy learning curve for the Bayes classifier

  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Vidal, Enrique|||0000-0003-4579-5196
[EN] In this paper, a theoretical learning curve is derived for the multi-class Bayes classifier. This curve fits general multivariate parametric models of the class-conditional probability density. The derivation uses a proxy approach based on analyzing the convergence of a statistic which is proportional to the posterior probability of the true class. By doing so, the curve depends only on the training set size and on the dimension of the feature vector; it does not depend on the model parameters. Essentially, the learning curve provides an estimate of the reduction in the excess of the probability of error that can be obtained by increasing the training set size. This makes it attractive in order to deal with the practical problems of defining appropriate training set sizes., Acknowledgments Grant TEC2017-84743-P funded by MCIN/AEI/10.13039/50110 0 011033 and by the European Union.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelado de las pérdidas de propagación en un escenario de oficinas en bandas de milimétricas

  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • Molina-García-Pardo, José María
  • Pérez, Jesús R.
  • Torres, Rafael P.
  • Fernández, Herman
  • Valle, Luis
  • Basterrechea, José
  • Domingo, Marta
[EN] In this conference contribution, we present millimeter-wave (mmWave) propagation measurements for an office environment from 25 to 40 GHz and investigate the path loss using the most common empirical models proposed in WINNER-II and adopted by the 3GPP: the single-frequency floating-intercept (FI) model, the single-frequency close-in (CI) free space reference distance model, the multi-frequency alphabeta-gamma (ABG) model and the close-in free space reference distance with frequency path loss exponent (CIF). Both line-ofsight (LOS) and obstructed-LOS (OLOS) propagation conditions have been considered. The mean value of the model parameters, and their 95 % confidence intervals, have been derived using regression and optimization techniques., Este trabajo ha sido financiado en parte por el Ministerio de Economia, Industria y Competitividad a traves de los proyectos TEC2016-78028-C3-2-P, TEC2017-86779-C2-1-R y TEC2017-86779-C2-2-R, a traves de la Agencia Estatal de Investigacion (AEI) y el Fondo Europeo de Desarrollo Regional (FEDER) y por COLCIENCIAS en Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis experimental de un canal massive MIMO en una picocelda de interior

  • Torres, Rafael P.
  • Pérez, Jesús R.
  • Basterrechea, José
  • Valle, Luis
  • Domingo, Marta
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] This paper presents an analysis of the massive MIMO channel in an indoor picocell. The analysis is based on the results of a measurement campaign carried out in the 3.2 to 4 GHz band in a scenario of reduced size and with a symmetrical geometry. It is well known that the performance of massive MIMO systems depends largely on the fact that the radio channel meets the condition of favorable propagation. In order to evaluate the performance of the resulting massive MIMO channel, results concerning the sum capacity are included. A second factor that determines the performance of massive MIMO systems when it is operated in a TDD-OFDM framework is the frequency selectivity of the channel that limits the size of the coherence block. In this sense, results of the coherence bandwidths achieved are also presented and analyzed., Este trabajo ha sido financiado por los proyectos del Plan Estatal de Investigación Científica y Técnica y de Innovación TEC2017-86779-C2-1-R y TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Early, Non-Invasive Sensing of Sustained Hyperglycemia in Mice Using Millimeter-Wave Spectroscopy

  • Moreno-Oyervides, Aldo
  • Martín-Mateos, Pedro
  • Ulisse, Giacomo
  • Arriba, María C.
  • Durban, María
  • Del Rio, Marcela
  • Larcher, Fernando
  • Krozer, Viktor
  • Acedo, Pablo
  • Aguilera-Morillo, M. Carmen|||0000-0003-1027-9773
[EN] Diabetes is a very complex condition affecting millions of people around the world. Its occurrence, always accompanied by sustained hyperglycemia, leads to many medical complications that can be greatly mitigated when the disease is treated in its earliest stage. In this paper, a novel sensing approach for the early non-invasive detection and monitoring of sustained hyperglycemia is presented. The sensing principle is based on millimeter-wave transmission spectroscopy through the skin and subsequent statistical analysis of the amplitude data. A classifier based on functional principal components for sustained hyperglycemia prediction was validated on a sample of twelve mice, correctly classifying the condition in diabetic mice. Using the same classifier, sixteen mice with drug-induced diabetes were studied for two weeks. The proposed sensing approach was capable of assessing the glycemic states at different stages of induced diabetes, providing a clear transition from normoglycemia to hyperglycemia typically associated with diabetes. This is believed to be the first presentation of such evolution studies using non-invasive sensing. The results obtained indicate that gradual glycemic changes associated with diabetes can be accurately detected by non-invasively sensing the metabolism using a millimeter-wave spectral sensor, with an observed temporal resolution of around four days. This unprecedented detection speed and its non-invasive character could open new opportunities for the continuous control and monitoring of diabetics and the evaluation of response to treatments (including new therapies), enabling a much more appropriate control of the condition., This research was supported in part by the Spanish Ministry of Economy and Competitiveness through the project TEC2017-86271-R and the Instituto de Salud Carlos III (Spain) through the grant DTS17/00135. Thanks to the Consejo Nacional de Ciencia y Tecnología de México (CONACYT) for financially supporting the doctoral education of Aldo M-O (PhD. Grant). Viktor Krozer is thankful for partial financial support in the frame of the Chairs of Excellence program of the Universidad Carlos III, Madrid, Spain. This research was partially supported by Project MTM2017-88708-P from Ministerio de Economía y Competitividad, FEDER funds, Project IJCI-2017-34038 from Agencia Estatal de Investigación, Ministerio de Ciencia, Innovación y Universidades and the Spanish Ministry of Economy and Competitiveness MTM2014-52184-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Strongly coupled multicore fiber with FBGs for multipoint and multiparameter sensing

  • Liu, Zhiming
  • Zheng, Di
  • Villatoro, Joel
  • Antonio-Lopez, Enrique
  • Schuelzgen, Axel
  • Amezcua-Correa, Rodrigo
  • Zou, Xihua
  • Pan, Wei
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] A compact optical fiber sensor by embedding fiber Bragg gratings (FBGs) in strongly coupled multicore fiber (SCMCF) is proposed for multipoint and multiparameter sensing. To build the device, two FBGs with different peak wavelengths were inscribed in a segment of SCMCF. Then one end of the SCMCF was fusion spliced to a single-mode fiber (SMF) and the other end of the SCMCF was cleaved. In the SMF-SCMCF structure, two supermodes are excited, as a result, the reflection spectrum exhibits a sinusoidal pattern with two sharp peaks. The wavelength position of the FBGs and the supermode coupler can be extracted simultaneously. Two distinct FBGs inscribed in different positions of the SCMCF were used to demonstrate quasi-distributed multipoint sensing in the proposed structure. To the best of our knowledge, this is the first demonstration of an optical fiber sensor that combines FBGs with SCMCF. The sensor here proposed has the advantage of compact size, low-cost, good mechanical strength and ease of interrogation., This work was supported in part by National Key Research and Development Program of China (2019YFB2203204), National Natural Science Foundation of China (61922069, 61775185), the "111" Plan (B18045), Sichuan Science and Technology Program (2020YJ0329), and the Spanish Ministry of Economy and Competitiveness under the project DIMENSION TEC2017 88029-R. J.V. acknowledges funding from the Fondo Europeo de Desarrollo Regional (FEDER) and the Ministerio de Economia y Competitividad (Spain) under project PGC2018-101997-B-I00. Document
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Comparative Study on Recent Automatic Data Fusion Methods

  • Pereira-González, Luis Manuel
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
[EN] Automatic data fusion is an important field of machine learning that has been increasingly studied. The objective is to improve the classification performance from several individual classifiers in terms of accuracy and stability of the results. This paper presents a comparative study on recent data fusion methods. The fusion step can be applied at early and/or late stages of the classification procedure. Early fusion consists of combining features from different sources or domains to form the observation vector before the training of the individual classifiers. On the contrary, late fusion consists of combining the results from the individual classifiers after the testing stage. Late fusion has two setups, combination of the posterior probabilities (scores), which is called soft fusion, and combination of the decisions, which is called hard fusion. A theoretical analysis of the conditions for applying the three kinds of fusion (early, late, and late hard) is introduced. Thus, we propose a comparative analysis with different schemes of fusion, including weaknesses and strengths of the state-of-the-art methods studied from the following perspectives: sensors, features, scores, and decisions., This research was funded by the Ministry of Science and Innovation of the Government of Spain MCIN/AEI/10.13039/501100011033 under Grants PRE2018-085092 and TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-Core Optical Fibers With Bragg Gratings as Shape Sensor for Flexible Medical Instruments

  • Khan, Fouzia
  • Denasi, Alper
  • Misra, Sarthak
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This paper presents a technique to reconstruct the shape of a flexible instrument in three-dimensional Euclidean space based on data from fiber Bragg gratings (FBGs) that are inscribed in multi-core fibers. Its main contributions are the application of several multi-core fibers with FBGs as shape sensor for medical instruments and a thorough presentation of the reconstruction technique. The data from the FBG sensors are first converted to strain measurements, which is then used to calculate the curvature and torsion of the fibers. The shape of the instrument is reconstructed using Frenet-Serret equations in conjunction with the calculated curvature and torsion of the instrument. The reconstruction technique is validated with a catheter sensorized with four multi-core fibers that have FBG sensors. The catheter is placed in eight different configurations and the reconstruction is compared to the ground truth. The maximum reconstruction error among all the configurations is found to be 1.05 mm. The results show that shape sensing for flexible medical instruments is feasible with FBG sensors in multi-core fibers., This work was supported in part by the European Union's Horizon 2020 Research and Innovation Programme under Grant 688279 (EDEN2020) and in part by the Spanish Ministry of Economy and Competitiveness under Project DIMENSION TEC2017-88029-R. The associate editor coordinating the review of this paper and approving it for publication was Dr. Ioannis Raptis.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multi-fiber distributed thermal profiling of minimally invasive thermal ablation with scattering-level multiplexing in MgO-doped fibers

  • Beisenova, Aidana
  • Issatayeva, Aizhan
  • Sovetov, Sultan
  • Korganbayev, Sanzhar
  • Jelbuldina, Madina
  • Ashikbayeva, Zhannat
  • Blanc, Wilfried
  • Schena, Emiliano
  • Molardi, Carlo
  • Tosi, Daniele
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] We propose a setup for multiplexed distributed optical fiber sensors capable of resolving temperature distribution in thermo-therapies, with a spatial resolution of 2.5 mm over multiple fibers interrogated simultaneously. The setup is based on optical backscatter reflectometry (OBR) applied to optical fibers having backscattered power significantly larger than standard fibers (36.5 dB), obtained through MgO doping. The setup is based on a scattering-level multiplexing, which allows interrogating all the sensing fibers simultaneously, thanks to the fact that the backscattered power can be unambiguously associated to each fiber. The setup has been validated for the planar measurement of temperature profiles in ex vivo radiofrequency ablation, obtaining the measurement of temperature over a surface of 96 total points (4 fibers, 8 sensing points per cu). The spatial resolution obtained for the planar measurement allows extending distributed sensing to surface, or even three-dimensional, geometries performing temperature sensing in the tissue with millimeter resolution in multiple dimensions., The research has been supported by ORAU program at Nazarbayev University (grants LIFESTART 2017-2019 and FOSTHER2018-2020), by ANR project Nice-DREAM (grant ANR-14-CE07-0016-03), and by project DIMENSION TEC2017 88029-R funded by the Spanish Ministry of Economy and Competitiveness. This work was partly supported by the SIRASI project - Sistema Robotico a supporto della Riabilitazione di Arto Superiore e Inferiore (Bando INTESE - CUP: F86D15000050002).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental study of the influence of FBG length on optical shape sensor performance

  • Floris, Ignazio
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
[EN] This paper compares the performance of optical Multicore Fibres (MCFs) with inscribed Fibre Bragg Gratings (FBGs) used as curvature and shape sensors in relation to strain sensor length. Two fibre optic shape sensors, consisting of FBGs written in standard optical multicore fibre (diameter 124.5 mu m), were assembled in the Institute for Telecommunications and Multimedia Applications (iTEAM) of the Universitet Politecnica de Valencia. The optical sensors were then positioned on an aluminium mould and quasi-distributed curvature and shape sensing were performed to compare the accuracy of the arrays. It was found that the MCF shape sensor performance strongly depended on FBG length and that sensors based on long FBGs were significantly more accurate, showing that long FBGs can considerably improve shape sensor accuracy at equal grating densities and achieve substantially better performance. This is a great advantage when wavelength division multiplexing is used, when only a limited number of usable FBGs can be applied. These new results, applicable to both multiple single-core optical fibres and multicore optical fibres with embedded quasi-distributed strain sensors, show the connection between strain sensor length and accuracy, hardly taken into account in previous studies, and lay the foundation for the design of new long-FBG-based shape sensors., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement no. 722509. It was also supported by the Spanish Ministry of Economy and Competitiveness within the DIMEN- SION TEC2017-88029-R. PROJECT
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A comparative analysis of early and late fusion for the multimodal two-class problem

  • Pereira-González, Luis Manuel
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
[EN] In this article we carry out a comparison between early (feature) and late (score) multimodal fusion, for the two-class problem. The comparison is made first from a general perspective, and then from a specific mathematical analysis. Thus, we deduce the error probability expressions for the uncorrelated and correlated multivariate Gaussian distribution, assuming perfect model knowledge (Bayes error rates). We also deduce the corresponding expressions when the model is to be learned from a finite training set, demonstrating its convergence to the Bayes error rates as the training set size goes to infinite. These expressions also demonstrates that early fusion is the best option with model knowledge, and that both early and late fusion degrade due to a finite training set. This degradation is showed to be greater for early fusion due to the dimensionality increase of the feature space, so, eventually, late fusion could be a better option in a practical setting. The mathematical analysis also suggests the convenience of using a, so called, convergence factor, to quantify if a training set size is appropriate for the error probability to be close enough to the Bayes error rate. Different simulated experiments have been made to verify the validity of the mathematical analysis, as well as its possible extension to non-Gaussian models., This work was supported in part by MCIN/AEI/10.13039/501100011033 under Grant PRE2018-085092, and in part by Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Generative Adversarial Networks and Markov Random Fields for oversampling very small training sets

  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Safont, Gonzalo
[EN] In this work, we propose a new method for oversampling the training set of a classifier, in a scenario of extreme scarcity of training data. It is based on two concepts: Generative Adversarial Networks (GAN) and vector Markov Random Field (vMRF). Thus, the generative block of GAN uses the vMRF model to synthesize surrogates by the Graph Fourier Transform. Then, the discriminative block implements a linear discriminant on features measuring clique similarities between the synthesized and the original instances. Both blocks iterate until the linear discriminant cannot discriminate the synthetic from the original instances. We have assessed the new method, called Generative Adversarial Network Synthesis for Oversampling (GANSO), with both simulated and real data in experiments where the classifier is to be trained with just 3 or 5 instances. The applications consisted of classification of stages of neuropsychological tests using electroencephalographic (EEG) and functional magnetic resonance imaging (fMRI) data and classification of sleep stages using electrocardiographic (ECG) data. We have verified that GANSO can effectively improve the classifier performance, while the benchmark method SMOTE is not appropriate to deal with such a small size of the training set., This work was supported by Spanish Administration (Ministerio de Ciencia, Innovacion y Universidades) and European Union (FEDER) under grant TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Anomalous Raman modes in tellurides

  • Manjón, Francisco-Javier|||0000-0002-3926-1705
  • Gallego-Parra, Samuel|||0000-0001-6516-4303
  • Rodríguez Hernández, Plácida
  • Muñoz, Alfonso
  • Drasar, Cestmir
  • Muñoz-Sanjosé, Vicente
  • Oeckler, Oliver
[EN] Two anomalous broad bands are usually found in the Raman spectrum of bulk and 2D Te-based chalcogenides, which include binary compounds, like ZnTe, CdTe, HgTe, GaTe, GeTe, SnTe, PbTe, GeTe2, As2Te3, Sb2Te3, Bi2Te3, NiTe2, IrTe2, and TiTe2, as well as ternary compounds, like GaGeTe, SnSb2Te4, SnBi2Te4, and GeSb2Te5. Many different explanations have been proposed in the literature for the origin of the anomalous broad bands in tellurides, usually located between 119 and 145 cm(-1). They have been attributed to the intrinsic Raman modes of the sample, to oxidation of the sample, to the folding of Brillouin-edge modes onto the zone center, to the existence of a double resonance, like that of graphene, or to the formation of Te precipitates. In this paper, we provide arguments to demonstrate that such bands correspond to clusters or precipitates of trigonal Te in the form of nanosize or microsize grains or layers that are segregated either inside or at the surface of the samples. Several mechanisms for Te segregation are discussed and sample heating caused by excessive laser power during Raman scattering measurements is emphasized. Besides, we show that anomalous Raman modes related to Se precipitates also occur in selenides, thus providing a general vision for better characterization of selenides and tellurides by means of Raman scattering measurements and for a better understanding of chalcogenides in general., This work has been performed under financial support from the Spanish Ministry of Science, Innovation and Universities, the Spanish Research Agency (AEI), and the European Fund for Regional Development (FEDER) under grants TEC2017-85912C2-2, RED2018-102612-T (MALTA-CONSOLIDER TEAM network) and PID2019-106383 GB-C42/C43. We are also thankful for financial support from Generalitat Valenciana under grant PROMETEO/2018/123 (EFIMAT). The authors also acknowledge Dr Philipp Urban for performing the synthesis of SnBi2Te4.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Sensing with coupled-core optical fiber Bragg gratings

  • Flores-Bravo, J. A.
  • Zubia, J.
  • Margulis, W.
  • Villatoro, J.
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Sensitive bending and vibration sensors based on a coupled-core optical fiber with Bragg gratings are proposed and demonstrated. The interrogation of such sensors is cost effective without comprising the sensors performance., This work was supported by the Spanish Ministry of Science and Innovation under projects No. PGC2018-101997-B100 and RTI2018-0944669-BC31 and the Universitat Politècnica de València with the scholarship PAID-01-18.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multiclass Alpha Integration of Scores from Multiple Classifiers

  • Safont Armero, Gonzalo
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
[EN] Alpha integration methods have been used for integrating stochastic models and fusion in the context of detection (binary classification). Our work proposes separated score integration (SSI), a new method based on alpha integration to perform soft fusion of scores in multiclass classification problems, one of the most common problems in automatic classification. Theoretical derivation is presented to optimize the parameters of this method to achieve the least mean squared error (LMSE) or the mínimum probability of error (MPE). The proposed alpha integrationmethod was tested on several sets of simulated and real data. The first set of experiments used synthetic data to replicate a problem of automatic detection and classification of three types of ultrasonic pulses buried in noise (four-class classification). The second set of experiments analyzed two databases (one publicly available and one private) of real polysomnographic records from subjects with sleep disorders. These records were automatically staged in wake, rapid eye movement (REM) sleep, and non-REM sleep (three-class classification). Finally, the third set of experiments was performed on a publicly available database of single-channel real electroencephalographic data that included epileptic patients and healthy controls in five conditions (five-class classification). In all cases, alpha integration performed better than the considered single classifiers and classical fusion techniques., This work was supported by the Spanish Administration and European Union under grant TEC2017-84743-P and Generalitat Valenciana under grant PROMETEO II/2014/032.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Computing the Partial Correlation of ICA Models for Non-Gaussian Graph Signal Processing

  • Belda, Jordi
  • Safont Armero, Gonzalo
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
[EN] Conventional partial correlation coefficients (PCC) were extended to the non-Gaussian case, in particular to independent component analysis (ICA) models of the observed multivariate samples. Thus, the usual methods that define the pairwise connections of a graph from the precision matrix were correspondingly extended. The basic concept involved replacing the implicit linear estimation of conventional PCC with a nonlinear estimation (conditional mean) assuming ICA. Thus, it is better eliminated the correlation between a given pair of nodes induced by the rest of nodes, and hence the specific connectivity weights can be better estimated. Some synthetic and real data examples illustrate the approach in a graph signal processing context., This research was funded by Spanish Administration and European Union under grants TEC2014-58438-R and TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Regenerated Fiber Bragg Gratings in Multicore Fiber for Multi-parameter Sensing

  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Multiple regenerated fiber Bragg gratings were inscribed in all the cores of a seven-core fiber in order to develop a multi-parameter sensor designed to operate at high temperatures. We experimentally showed the possibility of measuring strains of up to 1200 mu epsilon, curvatures from 0 degrees to 360 degrees and temperatures up to 1000 degrees C, with a maximum curvature magnitude of at least 4.6 m(-1) and a maximum sensibility of 96 pm/m(-1)., This work was supported in part by the Spanish Ministry of Economy and Competitiveness under the DIMENSION TEC2017 88029-R Project and in part by the Generalitat Valenciana by the PROMETEO 2017/103 Research Excellency Award and IDI/FEDER/2018 GVA Infraestructura. The work of J. Madrigal was supported by a Universitat Politecnica de Valencia scholarship PAID-01-18. The work of D. Barrera was supported by a Spanish MICINN Fellowship IJCI-2017-32476.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fading Evaluation in Standardized 5G Millimeter-Wave Band

  • Rufino-Marins, Tiago Reis
  • dos Anjos, André Antônio
  • Nogueira da Silva, Carlos Rafael
  • Amaral de Souza, Rausley Adriano
  • Yacoub, Michel Daoud
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Reig, Juan|||0000-0003-4541-9326
[EN] Recent standardization of portions of the millimeter-wave (mm-wave) band for fifth-generation (5G) operation has called for further research on how short-term fading behaves in that unexplored part of the spectrum. With such a target, this paper reports on a thorough measurement campaign conducted in an indoor environment characterized by rich-multipath scattering, a part of a modern building, with floor and ceiling constructed of reinforced concrete over steel plates with wood and plasterboard-paneled walls. Particularly, measurements have been performed in a variety of scenarios, under line-of-sight (LoS) and non-line-ofsight (nLoS) conditions, for a wide range of frequencies, namely from 25 to 40 GHz - a span of 15 GHz - therefore, including 26, 28 and 39 GHz. First and second order statistics of representative fading models, namely Rayleigh, Rice, Nakagami, folded normal, alpha-mu, eta-mu, kappa-mu and alpha-eta-kappa-mu have been investigated. The metrics used in the analysis were the normalized mean square error (NMSE), the Kolmogorov-Smirnov (KS), and the Akaike information criterion (AIC). Additionally, the study of the kappa-mu. model is advanced, in which new, exact, simple closed-form expressions for probability density function, cumulative distribution function, and level crossing rate are derived for some particular cases, namely for mu = n + 1/2 in which n is an element of N., This work was supported in part by the Rede Nacional de Ensino e Pesquisa (RNP) with resources from Ministerio da Ciencia, Tecnologia e Inovacoes (MCTIC) through the 6G Mobile Communications Systems Project of the Centro de Referencia em Radio-comunicacoes (CRR), Instituto Nacional de Telecomunicacoes (Inatel), Brazil, under Grant 01245.010604/2020-14, in part by the Fundacao de Amparo a Pesquisa do Estado de Minas Gerais (FAPEMIG), in part by the Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) under Grant 304248/2014-2, and in part by the Ministerio de Economia, Industria y Competitividad of the Spanish Government under the National Project through the Agencia Estatal de Investigacion (AEI) and the Fondo Europeo de Desarrollo Regional (FEDER) under Grant TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Non-volatile epsilon-near-zero readout memory

  • Parra Gomez, Jorge|||0000-0003-4610-3411
  • Sanchis Kilders, Pablo|||0000-0003-2984-4218
  • Olivares-Sánchez-Mellado, Irene
  • Brimont, Antoine Christian Jacques
[EN] The lack of memory effect of silicon makes it unfeasible to store electronic data in photonics. Here we propose a nonvolatile readout photonic memory, which is electronically written/erased and optically read. The memory utilizes indium tin oxide as a floating gate and exploits its epsilon-near-zero regime and electro-optic activity. Extinction ratios greater than 10 dB in a bandwidth of 100 nm for a 5 mu m long memory are obtained. Furthermore, power consumption in the order of microwatts with retention times of about a decade have been predicted. The proposed structure opens a pathway for developing highly integrated electro-optic devices such as memory banks. (C) 2019 Optical Society of America., The authors thank Alba Vicente for her valuable comments. Ministerio de Economia y Competitividad (MINECO) (TEC2016-76849, TEC2017-92037-EXP); Ministerio de Educacion, Cultura y Deporte (MECD) (FPU17/04224); Universitat Politecnica de Valencia (UPV) (FPI-Irene Olivares).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the Contribution of Dense Multipath Components in an Intrawagon Environment for 5G mmW Massive MIMO Channels

  • Challita, Frédéric
  • Juan-Llácer, Leandro
  • Pascual-García, Juan
  • Molina-García-Pardo, José-María
  • Liénard, Martine
  • Gaillot, Davy P.
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Reig, Juan|||0000-0003-4541-9326
[EN] In this letter, the dependence of the specular multipath components (SMC) and dense multipath components (DMC) to the interuser spatial correlation and sum-rate capacity of a massive multiuser multiple-input--multiple-output (MU-MIMO) setup is evaluated from measurements conducted inside an underground subway wagon at the 25-40 GHz candidate frequency bands for 5G systems. The radio channel consists in a 7 7 uniform rectangular array (URA) acting as access point for eight users uniformly distributed in the wagon. The DMC power ratio is observed to be distance- and frequency-dependent as the SMC and DMC exhibit different propagation mechanisms. Remarkably, it is reported that the interuser spatial correlation computed with DMC offers the best favorable propagation for a massive MIMO setup, whereas SMC contribute to the users correlation. Hence, correlation is found to be strongly dependent on the DMC ratio frequency characteristics. In addition, better interuser correlation and sum-rate capacity values are obtained as the frequency is increased. These results highlight the need to include DMC in 5G massive MIMO channel models and emulators to improve their accuracy at the system level., This work was supported in part by MINECO, Spain, under the National Projects TEC2016-78028-C3-2-P and TEC2017-86779-C2-2-R and in part by the ELSAT2020 OS4 SMARTIES program co-financed by the European Union with the European Regional Development Fund, the French state, and the Hauts de France Region Council.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multichannel dynamic modeling of non-Gaussian mixtures

  • Safont Armero, Gonzalo
  • Gomez, Enriqueta
  • Villanueva, Vicente
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
[EN] This paper presents a novel method that combines coupled hidden Markov models (HMM) and non Gaussian mixture models based on independent component analyzer mixture models (ICAMM). The proposed method models the joint behavior of a number of synchronized sequential independent component analyzer mixture models (SICAMM), thus we have named it generalized SICAMM (G-SICAMM). The generalization allows for flexible estimation of complex data densities, subspace classification, blind source separation, and accurate modeling of both local and global dynamic interactions. In this work, the structured result obtained by G-SICAMM was used in two ways: classification and interpretation. Classification performance was tested on an extensive number of simulations and a set of real electroencephalograms (EEG) from epileptic patients performing neuropsychological tests. G-SICAMM outperformed the following competitive methods: Gaussian mixture models, HMM, Coupled HMM, ICAMM, SICAMM, and a long short-term memory (LSTM) recurrent neural network. As for interpretation, the structured result returned by G-SICAMM on EEGs was mapped back onto the scalp, providing a set of brain activations. These activations were consistent with the physiological areas activated during the tests, thus proving the ability of the method to deal with different kind of data densities and changing non-stationary and non-linear brain dynamics. (C) 2019 Elsevier Ltd. All rights reserved., This work was supported by Spanish Administration (Ministerio de Economia y Competitividad) and European Union (FEDER) under grants TEC2014-58438-R and TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Vías de inmovilización de biomoléculas sobre SU-8 y otras superficies poliméricas para su utilización en biosensado óptico sin marcaje

  • Díaz Betancor, Zeneida
[ES] La presente tesis "Vías de inmovilización de biomoléculas sobre SU-8 y otras superficies poliméricas para su utilización en biosensado óptico sin marcaje" tiene como objetivo el diseño, desarrollo y evaluación de diferentes métodos de anclaje de biorreceptores en distintos materiales, en formato de micromatriz, con aplicación en biosensado. En la actualidad sigue siendo un área de creciente interés desarrollar nuevos sistemas de análisis para la detección de analitos, más sensibles y selectivos, con tiempos de análisis reducidos, miniaturizables y automatizables. Estos desarrollos pueden aplicarse en dispositivos biosensores que encuentran su aplicación en campos tan diversos como diagnóstico clínico, medicina forense y medio ambiente. Con el objetivo de desarrollar biosensores con prestaciones mejoradas se estudiaron estrategias de inmovilización de sondas sobre el soporte de ensayo basadas en el empleo de hidrogeles. En una primera fase, los desarrollos se realizaron usando tecnología de micromatrices de fluorescencia, que permite utilizar una menor cantidad de muestra y analizar múltiples analitos y muestras a la vez, reduciendo el tiempo de análisis y el coste Posteriormente, los desarrollos ya optimizados se emplearon para la puesta a punto de un biosensor óptico sin marcaje de tipo BICELL (Biophotonic Sensing Cells) en colaboración con la UPM (Universidad Politecnica de Madrid), que se aplicaron a sistemas modelo y a problemas reales. Asimismo, y en colaboración con el Centro de Tecnología Nanofotónica de la UPV, se implementó la estrategia de inmovilización a través del uso de hidrogeles, en biosensores ópticos sin marcaje constituidos por guías de ondas corrugadas. En este caso, además de la inmovilización a través de hidrogeles, se estudió un método de inmovilización covalente de fragmentos de anticuerpos que permitió su fijación orientada y muy próxima a la superficie del sensor. La tesis se estructura en seis capítulos. En el Capítulo 1 se da una visión general del concepto de biosensado, atendiendo a las distintas clasificaciones y los diferentes aspectos que hay que considerar en su diseño. En el Capítulo 2 se plantean los objetivos generales y particulares de la tesis. El Capítulo 3 plantea la aplicación de dos hidrogeles fotoinducidos derivados de fosforicolina y dextrano para mejorar la inmovilización de biomoléculas en formato micromatriz, sobre superficies planas y usando el formato de micromatriz de fluorescencia para realizar ensayos de detección con proteínas y oligonucleótidos. La polimerización del gel y el anclaje de las sondas se lleva a cabo simultáneamente mediante la utilización de reacciones fotoinducidas empleando la química click de acoplamiento tiol-eno. En el Capítulo 4 se implementa el método desarrollado en micromatriz con uno de los hidrogeles en dos tipos de biosensores interferométricos sin marcaje fabricados en SU-8. Con ambos sensores se detecta CRP en suero con muy buena sensibilidad (, LOD de 21 pg/mL). Por otro lado, esta estrategia se ensaya también en sensores nanofotónicos basados en guías de ondas corrugadas con resultados prometedores. En este capítulo también se pone a punto y se evalúa en tiempo real la inmovilización de fragmentos de anticuerpo sobre la superficie del sensor nanofotónico, mediante la reacción de acoplamiento tiol-eno inducida por luz UV. La monitorización en tiempo real permite demostrar el papel indispensable de la luz en el proceso de inmovilización. Utilizando esta aproximación se ensaya la detección sin marcaje de tres biomarcadores cardíacos de interés (CRP, cTnI/T y Mioglobina). El quinto capítulo se dedica a la descripción detallada de todos los procedimientos experimentales que se llevan a cabo en los Capítulos 3 y 4. Finalmente, el Capítulo 6 recoge las conclusiones alcanzadas a partir de los resultados obtenidos en el desarrollo de la tesis doctoral., [EN] This thesis "Biomolecule immobilization approaches on SU-8 and other polymer surfaces for label-free optical biosensing" aims to design, develop and evaluate different methods for anchoring bioreceptors in different materials, in a microarray format, with application in biosensing. Currently, it is still an area of growing interest to develop new analysis systems for the detection of biomolecules, being more sensitive and selective, with reduced analysis time, miniaturizable and automatable. These developments can be applied in biosensing devices that find utility in fields as diverse as clinical diagnosis, forensic medicine and environmental monitoring. To develop biosensors with improved performance, here strategies for immobilization of probes on the test support based on the use of hydrogels were studied. In a first phase, the developments were carried out using microarray technology, which uses lower amount of sample and can analyze multiple targets and samples at the same time, reducing tests time and cost. Subsequently, the optimized developments were used to develop, in collaboration with UPM (Polytechnic University of Madrid), a label-free optical biosensor based onBICELLs (Biophotonic Sensing Cells), which were applied to model systems and real samples. Likewise, and in collaboration with the Nanophotonic Technology Center at UPV, the hydrogel-based immobilization strategy was implemented in other label-free nanophotonic biosensors consisting of corrugated waveguides. In this case, in addition to immobilization through hydrogels, we studied a method of covalent immobilization of antibody fragments that allowed them to be oriented and very close to the sensor surface. Thus the thesis is organized into six chapters. Chapter 1 gives an overview of the concept of biosensing, and takes into account the different classifications and different items that must be considered in its design. Chapter 2 sets out the general and particular objectives of the thesis. Chapter 3 discusses the application of two photoinduced hydrogels, derived from phosphoricoline and dextran, respectively, to improve the immobilization of biomolecules in microarray format, on planar surfaces and using the fluorescence microarray format to perform detection assays with proteins and oligonucleotides. The polymerization of the gel and the anchoring of the probes are carried out using photoinduced reactions using the thiol-ene coupling click chemistry, and derivatives, performing both steps simultaneously. In Chapter 4 the method developed with one of the hydrogels in microarray format is transferred to two types of SU-8 based interferometric label-free biosensors. Both biosensors detected CRP in blood serum with very good sensitivity (LOD de 21 pg/mL). Besides, this strategy is also tested on nanophotonic sensors based on corrugated waveguides with promising results. In this chapter, immobilization of antibody fragments on the surface of the nanophotonic sensor is also performed and assessed in real time by the UV light-induced thiol-ene coupling reaction. Real-time monitoring shows the essential role of light in the immobilization process. Using this approach, the label-free detection of three cardiac biomarkers of interest (CRP, cTnI / T and Myoglobin) is tested. The fifth chapter is devoted to the detailed description of all the experimental procedures that are carried out in chapters 3 and 4. Finally, Chapter 6 collects the conclusions reached from the results obtained in the development of the doctoral thesis., [CA] La present tesi "Vies d'immobilització de biomolècules sobre SU-8 i altres superfícies polimèriques per a la seva utilització en biosensado òptic sense marcatge" té com a objectiu el disseny, desenvolupament i avaluació de diferents mètodes d'ancoratge de bioreceptors en diferents materials, en format de micromatriu , amb aplicació en biosensat. En l'actualitat segueix sent una àrea de creixent interès desenvolupar nous sistemes d'anàlisi per a la detecció de biomolècules, que siguen més sensibles i selectius, amb temps d'anàlisi reduïts, miniaturizables i automatitzables. Aquests desenvolupaments poden aplicar-se en dispositius biosensors que troben la seva utilitat en camps tan diversos com diagnòstic clínic, medicina forense i medi ambient. Amb l'objectiu de desenvolupar biosensors amb prestacions millorades es van estudiar estratègies d'immobilització de sondes sobre el suport d'assaig basades en l'ús de hidrogels. En una primera fase, els desenvolupaments es van realitzar usant tecnologia de micromatrius, que permet utilitzar una menor quantitat de mostra i analitzar múltiples dianes i mostres alhora, reduint el temps d'anàlisi i el cost Posteriorment, els desenvolupaments ja optimitzats es van emprar per a la posada a punt d'un biosensor òptic sense marcatge de tipus BICELL (Biophotonic Sensing Cells) en col·laboració amb la UPM (Universitat Politècnica de Madrid), que es van aplicar a sistemes model i als problemes reals. Així mateix, i en col·laboració amb el Centre de Tecnologia Nanofotònica de la UPV, es va implementar l'estratègia d'immobilització a través de l'ús de hidrogels, en biosensors òptics sense marcatge constituïts per guies d'ones corrugades. En aquest cas, a més de la immobilització mitjançant hidrogels es va estudiar un mètode d'immobilització covalent de fragments d'anticossos que va permetre la seva unió orientada i molt propera a la superfície del sensor. Així donç, la tesi s'estructura en sis capítols. En el capítol 1 es dóna una visió general delconcepte de biosensat, atenent les diferents classificacions i els diferents aspectes que cal considerar en el seu disseny. En el capítol 2 es plantegen els objectius generals i particulars de la tesi. El Capítol 3 planteja l'aplicació de dos hidrogels fotoinduïts derivats de fosforicolina i dextrà respectivament per millorar la immobilització de biomolècules en format micromatriu, sobre superfícies planes i usant el format de micromatriu de fluorescència per a realitzar assajos de detecció amb proteïnes i oligonucleòtids. La polimerització dell gel i l'ancoratge de les sondes es porta a terme simultàniament mitjançant la utilització de reaccions fotoinducides emprant la química click d'acoblament tiol-eno, i derivades. En el capítol 4 s'implementa el mètode desenvolupat en micromatriu amb un dels hidrogels en dos tipus de biosensors interferométricos sense marcatge basats en SU-8. Amb tots dos sensors es detecta CRP en sèrum sanguini amb molt bona sensibilitat (LOD de 21 pg/mL). D'altra banda, aquesta estratègia s'assaja també en sensors nanofotònics basats en guies d'ones corrugades amb resultats prometedors. En aquest capítol també es posa a punt i s'avalua en temps real la immobilització de fragments d'anticòs sobre la superfície del sensor nanofotònic, mitjançant la reacció d'acoblament tiol-eno induïda per llum UV. El monitoratge en temps real permet demostrar el paper indispensable de la llum en el procés d'immobilització. Utilitzant aquesta aproximació s'assaja la detecció sense marcatge de tres biomarcadors cardíacs d'interès (CRP, cTnI / T i Mioglobina). El cinquè capítol es dedica a la descripció detallada de tots els procediments experimentals que es duen a terme en els capítols 3 i 4. Finalment, el Capítol 6 recull les conclusions assolides a partir dels resultats obtinguts en el desenvolupament de la tesi doctoral., Agradecer a la financiación de esta investigación por Garantía Juvenil, FEDER y los proyectos del MINECO CTQ / 2016/75749‐R y TEC / 2017/84846‐R. Además, fue apoyado por el Programa Horizonte 2020 de la Unión Europea en el marco del proyecto H2020‐PHC‐634013 (PHOCNOSIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fading Evaluation in the mm-Wave Band

  • Rufino Marins, Tiago Reis
  • dos Anjos, André Antônio
  • Amaral de Souza, Rausley Adriano
  • Yacoub, Michel Daoud
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Reig, Juan|||0000-0003-4541-9326
[EN] A thorough millimeter-wave measurement campaign is carried out in an indoor environment with an aim at characterizing the short-term fading channel behavior. The measurements are conducted in a variety of scenarios, with frequencies ranging from 55 GHz to 65 GHz, in line-of-sight and non-line-of-sight conditions, and combinations of horizontal and vertical polarizations at both transmitter and receiver. A number of fading models are tested, namely Rayleigh, Rice, Nakagami-m, alpha-mu, kappa-mu, eta-mu, and alpha-eta-kappa-mu. The statistics under analysis are those characterizing the fading amplitude and the frequency selectivity. In particular, the probability density and cumulative distribution functions for the former and level crossing rate per bandwidth unit for the latter are the respective first-and second-order statistics used. To this end, from the experimental data, the parameters of the models are estimated and the corresponding theoretical curves are plotted and compared with the empirical ones. Whereas the required theoretical formulations of the first-order statistics of these models are already well known, those of the second-order statistics as well as these fitting process in such a band shown here are unprecedented in the literature., This work was supported in part by CNPq under Grant 304248/2014-2 and Grant 308365/2017-8 and in part by RNP, with resources from MCTIC, Grant No. No 01250.075413/2018-04, under the Radiocommunication Reference Center (Centro de Referencia em Radiocomunicacoes -CRR) project of the National Institute of Telecommunications (Instituto Nacional de Telecomunicacoes -Inatel), Brazil, and by the Ministerio de Economia, Industria y Competitividad of the Spanish Government under the national project TEC2017-86779-C2-2-R, through the Agencia Estatal de Investigacion (AEI) and the Fondo Europeo de Desarrollo Regional (FEDER). The associate editor coordinating the review of this article and approving it for publication was T. Kim.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Opto-Mechanical Interactions in Multi-Core Optical Fibers and Their Applications

  • Diamandi, Hilel Hagai
  • London, Yosef
  • Bergman, Arik
  • Bashan, Gil
  • Zadok, Avi
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Optical fibers containing multiple cores are being developed towards capacity enhancement in space-division multiplexed optical communication networks. In many cases, the fibers are designed for negligible direct coupling of optical power among the cores. The cores remain, however, embedded in a single, mechanically-unified cladding. Elastic (or acoustic) modes supported by the fiber cladding geometry are in overlap with multiple cores. Acoustic waves may be stimulated by light in any core through electrostriction. Once excited, the acoustic waves may induce photo-elastic perturbations to optical waves in other cores as well. Such opto-mechanical coupling gives rise to inter-core cross-phase modulation effects, even when direct optical crosstalk is very weak. The cross-phase modulation spectrum reaches hundreds of megahertz frequencies. It may consist of discrete and narrow peaks, or may become quasi-continuous, depending on the geometric layout. The magnitude of the effect at the resonance frequencies is comparable with that of intra-core cross-phase modulation due to Kerr nonlinearity. Two potential applications are demonstrated: single-frequency opto-electronic oscillators that do not require radio-frequency electrical filters, and point-sensing of liquids outside the cladding of multi-core fibers, where light cannot reach., This work was supported in part by a Starter Grant from the European Research Council (ERC) under Grant H2020-ERC-2015-STG 679228 (L-SID), in part by the Israeli Ministry of Science and Technology under Grant 61047, and in part by the Spanish Ministry of Economy and Competitiveness under the DIMENSION TEC2017 88029-R Project. H. H. Diamandi was supported by the Azrieli Foundation for the award of an Azrieli Fellowship. The work of J. Madrigal was supported by Universitat Politecnica de Valencia scholarship PAID-01-18. The work of D. Barrera was supported by Spanish MICINN fellowship IJCI-2017-32476.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microwave Photonics Filtering Interrogation Technique Under Coherent Regime For Hot Spot Detection on a Weak FBGs Array

  • Hervás-Peralta, Javier
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] An interrogation technique of cascaded FBG sensors based on a microwave photonics filtering technique under coherent regime is presented. The sensing information of a 5-m fiber coil containing 500 weak FBG with a similar central wavelength is retrieved. The FBGs are 9-mm long and the spatial separation between consecutive FBGs is 1 mm. The principle of operation is based on the calculation of the impulse response by recording the electrical frequency response of the system. Hot spot detection, location, and temperature measurement are demonstrated by experimental measurements with a temperature sensitivity of 0.6 dB/°C in a 10 °C range. Fifteen measurements are recorded in order to average them to reduce noise and smooth the saw tooth appearance typical of coherent measurements. The resolution of the proposed interrogation technique is related to the bandwidth of the electrical measurement. We have obtained a resolution of 20 cm for an electrical bandwidth of 1 GHz. The SNR was larger than 16 dB despite the fact that no amplification was used within the system., This work was supported in part by the Spanish MINECO under Project DIMENSION TEC2017-88029-R, in part by the Generalitat Valenciana (APOSTD/2016/015), in part by the FINESSE funded by the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Action under Grant 722509, in part by the Sistema Nacional de Garantia Juvenil under Grant PEJ-2014-A-24709, and in part by the MECD FPU scholarship under Grant FPU13/04675.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Optimización de la configuración de una sonda de canal en el dominio de la frecuencia en bandas de milimétricas

  • Catalá-Lahoz, Cristina|||0000-0002-9425-9077
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Reig, Juan|||0000-0003-4541-9326
[EN] In this contribution to the conference, we present different methods to improve the dynamic range of mobile radio channel measurements using a channel sounder in the frequency domain for millimeter wave (mmWave) propagation measurements. The advantages of using a radio over fiber (RoF) link are explained to avoid the losses introduced by a coaxial cable in measurements carried out in indoor and outdoor environments. Furthermore, measurements are carried out in a laboratory environment in order to obtain the optimal configuration parameters to carry out large measurement campaigns in the shortest possible time while maintaining the highest possible dynamic range and the correct calculation of the dispersion parameters. Finally, a simple protocol is disclosed to obtain the optimal parameters mentioned through three short steps., Este trabajo ha sido financiado en parte por el Ministerio de Economía, Industria y Competitividad a través del proyecto TEC2017-86779-C2-2-R (AEI/FEDER, UE).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fiber Bragg Grating Sensors for Underwater Vibration Measurement: Potential Hydropower Applications

  • de la Torre, Oscar
  • Floris, Ignazio
  • Escaler, Xavier
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] The present paper assesses the performance and characteristics of fiber Bragg grating sensors, with a special interest in their applications in hydraulic machinery and systems. The hydropower industry is turning to this technology with high expectations of obtaining high quality data to validate and calibrate numerical models that could be used as digital twins of key assets, further strengthening the sector's relevant position within industry 4.0. Prior to any validation, fiber Bragg grating sensors' ability to perform well underwater for long periods of time with minimal degradation, and their ease of scalability, drew the authors ' attention. A simplified modal analysis of a partially submerged beam is proposed here as a first step to validate the potential of this type of technology for hydropower applications. Fiber Bragg grating sensors are used to obtain the beam's natural frequencies and to damp vibrations under different conditions. The results are compared with more established waterproof electric strain gauges and a laser vibrometer with good agreement. The presence of several sensors in a single fiber ensures high spatial resolution, fundamental to precisely determine vibration patterns, which is a main concern in this industry. In this work, the beam's vibration patterns have been successfully captured under different excitations and conditions., This research was funded by Horizon 2020 research and innovation program under grant agreement No 814958.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Monitoring temperature and vibration in a long weak grating array with short-pulse generation using a compact gain-switching laser diode module

  • Sartiano, Demetrio
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Quasi-distributed temperature sensing and single point vibration sensing were performed. Ultrashort pulses generated by a gain-switching laser were used to interrogate a fiber Bragg gratings (FBG) array sensor. Temperature changes were measured down to 1 degrees C with sub-centimeter spatial resolution. The advantages of our fast interrogation setup were exploited, as the higher frequency limit of a dynamic measure that can be sensed is limited by the time needed to generate the optical pulse and to acquire the data from the sensor. The experimental approach described in this paper can sense mechanical vibrations up to a frequency of 245 kHz and a strain resolution as low as 1.2 mu epsilon., H2020 Marie Sklodowska-Curie Actions (MSCA-ITN-ETN-722509); Ministerio de Economia y Competitividad (DIMENSION TEC2017 88029-R); Generalitat Valenciana (PROMETEO 2017/103).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Higher Order Statistics in a mmWave Propagation Environment

  • dos Anjos, A. Antônio
  • Rufino-Marins, T. R.
  • Nogueira da Silva, C. R.
  • Amaral de Souza, R. A.
  • Daoud Yacoub, M.
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Reig, Juan|||0000-0003-4541-9326
[EN] A thorough measurement campaign in an indoor environment at the millimeter-wave band is carried out with an aim at characterizing the short-term fading channel in terms of its higher-order statistics. The measurements are conducted in a variety of scenarios, with frequencies ranging from 55 to 65 GHz, in line-of-sight and non-line-of-sight conditions, and combinations of horizontal and vertical polarizations at both the transmitter and the receiver. A number of fading models are tested, namely Rayleigh, Rice, Nakagami-m, alpha-mu, kappa-mu, eta-mu, and alpha-eta-kappa-mu. The main second-order statistics under analysis are the level crossing rate (LCR) and average fade duration (AFD) both given per distance unit. From the experimental data, the parameters of these statistics are estimated, and the corresponding curves of the theoretical models are compared with the empirical ones and the best model is selected. Additionally, the study of the very general distribution, namely alpha-eta-kappa-mu, is advanced, in which new expressions for time-/distance-domain LCR and Al-ll are derived using an envelope-based approach. Such an approach leads to integral-form formulations with much less computational complexity and computes rapidly compared with the already existing ones presented elsewhere, also given in the integral form. Furthermore, a series of expansion expression for the alpha-eta-kappa-mu time-/distance-domain LCR is then derived that improves even further the computational time., This work was supported in part by the Conselho Nacional de Desenvolvimento Cientico e Tecnologico (CNPq) under Grant 304248/2014-2 and Grant 308365/2017-8, in part by the Rede Nacional de Ensino e Pesquisa (RNP), with resources from Ministerio da Ciencia, Tecnologia, Inovacoes e Comunicacoes (MCTIC), through the Radiocommunication Reference Center [Centro de Referencia em Radiocomunicacoes (CRR)] Project of the National Institute of Telecommunications [Instituto Nacional de Telecomunicacoes (INATEL)], Brazil, under Grant 01250.075413/2018-04, and in part by the Ministerio de Economia, Industria y Competitividad of the Spanish Government through the Agencia Estatal de Investigacion (AEI) and the Fondo Europeo de Desarrollo Regional (FEDER) under Project TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Experimental Rician K-factor characterization in a laboratory environment at the 25 to 40 GHz frequency band

  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Fernández, Herman
[EN] In this work, an analysis of the Rician K-factor in a laboratory environment from 25 to 40 GHz has been carried out. The variation of the estimated K-factor has been assessed in frequency from a channel measurements campaign in both line-of-sight (LOS) and non-LOS (NLOS) conditions. Mean values of the K-factor ranging from 0.48 to 3.43 dB for LOS conditions, and from -5.54 to -0.56 dB for NLOS conditions, have been derived. The results reported here enable us to get insight into the propagation channel characteristics and can be of interest to evaluate the performance of fifth-generation (5G) networks in laboratory environments., This work has been funded in part by the Spanish Ministerio de Economia, Industria y Competitividad under the project TEC2017-86779-C2-2-R, and by COLCIENCIAS in Colombia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Twisting measurement and compensation of optical shape sensor based on spun multicore fiber

  • Floris, Ignazio
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
[EN] This study presents a novel method for twisting compensation in optical shape sensing and first reports on twisting sensing by using Fiber Bragg Gratings (FBG) inscribed in a spun Multicore Fiber (MCF). A simple approach, based on Saint-Venant's Torsion Theory for homogeneous circular cylinders, was developed to calculate the fiber twisting from the longitudinal strain sensed in the cores and reconstruct three-dimensional shape taking into account and compensating the twisting, by enhancing the mathematical formulation of the previous approaches. Then, a 44 mm-long pre-twisted fiber optic shape sensor was produced in the Institute for Telecommunications and Multimedia Applications (iTEAM) of the UPV, by writing four FBGs in a spun multicore fiber (diameter of 125.1 mu m) with a pre-twisting of 64.9 rotation/meter. Finally, a series of experiments were performed to validate the method and evaluate the sensor performance. The outcomes of the experiments, perfectly in accordance with the theory, prove the elastic behavior of the sensor, even at high levels of deformation. Moreover, the proposed Spun-MCF-based Shape Sensor resulted able to measure twisting with a sensitivity of 0.23 pm/degrees and accuracy of 4.81 degrees within a wide dynamic range of +/- 270 degrees (+/- 6136.4 degrees/m). These new results can notably enhance the accuracy of fiber optic shape sensors and lead to the design of new fiber geometries and sensors. (C) 2020 Elsevier Ltd. All rights reserved., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement N~ 722509. It was also supported by the Ministry of Economy and Competitiveness of Spain under DIMENSION TEC2017-88029-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On Training Road Surface Classifiers by Data Augmentation

  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Rodríguez, Alberto
  • Vargas, Nancy
[EN] It is demonstrated that data augmentation is a promising approach to reduce the size of the captured dataset required for training automatic road surface classifiers. The context is on-board systems for autonomous or semi-autonomous driving assistance: automatic power-assisted steering. Evidence is obtained by extensive experiments involving multiple captures from a 10-channel multisensor deployment: three channels from the accelerometer (acceleration in the X, Y, and Z axes); three microphone channels; two speed channels; and the torque and position of the handwheel. These captures were made under different settings: three worm-gear interface configurations; hands on or off the wheel; vehicle speed (constant speed of 10, 15,20, 30 km/h, or accelerating from 0 to 30 km/h); and road surface (smooth flat asphalt, stripes, or cobblestones). It has been demonstrated in the experiments that data augmentation allows a reduction by an approximate factor of 1.5 in the size of the captured training dataset., This research was funded by MCIN/AEI/10.13039/501100011033 and by the European Union, grant number TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Análisis experimental del canal MIMO masivo en un entorno de oficina en ondas milimétricas

  • Avellán, Cristina
  • Torres, Rafael P.
  • Pérez, Jesús R.
  • Valle, Luis
  • Fernández, Hermán
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] Massive multiple-input multiple-output (MIMO) is considered an enabling technology to achieve large capacities in multi-user scenarios in the upcoming mobile networks (5G and beyond). In this paper, the performance of the massive MIMO concept is investigated from measurement data at millimeter wave (mmWave) frequencies. The measurements were collected in an indoor office environment from 25 to 40 GHz in the frequency domain, using a virtual uniform rectangular array (URA) at the base station consisting of 144 (12×12) antennas. Line-of-Sight (LOS) and Obstructed-LOS (OLOS) propagation conditions have been considered. Both the favorable propagation condition and the achievable capacity are analysed in terms of active users and number of antennas placed at the base station. The results are particularised at the 26, 28 and 38 GHz bands adopted for the deployment of future wireless communication networks., Este trabajo ha sido financiado en parte por el Ministerio de Economía, Industria y Competitividad a través de los proyectos TEC2017-86779-C2-1-R y TEC2017-86779-C2-2-R, a través de la Agencia Estatal de Investigación (AEI) y el Fondo Europeo de Desarrollo Regional (FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Millimeter Wave MISO-OFDM Transmissions in an Intra-Wagon Environment

  • Sanchis Borrás, Concepción
  • Molina-García-Pardo, José-María
  • Pascual-García, Juan
  • Juan Llacer, Leandro
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] In this paper, the maximum achievable throughput is analyzed in the intra-wagon channel when multiple-input single-output (MISO) and orthogonal frequency division multiplexing (OFDM), MISO-OFDM, techniques are used. This analysis is performed from real wideband propagation channel measurements at 28 and 37 GHz, two potential frequency bands to deploy the future fifth-generation (5G) wireless communications networks. Four different scenarios in terms of the access point (AP) and user equipment (UE) positions inside the wagon have been considered, using 4 and 8 antennas at the AP. The performance of both quasi-orthogonal space-time block code (QSTBC), combined with Hadamard matrices, and transmit beamforming techniques is studied and evaluated from simulation results. The simulation results take into account the signal-to-noise ratio (SNR) and the antenna correlation for each antenna array configuration at the AP. These results provide useful insight to better understand the intra-wagon channel properties and deploy the future 5G wireless networks in this particular scenario at mmWave frequencies, where high-data-rates are expected to support different types of digital applications., This work was supported in part by the Ministerio de Economia y Competitividad MINECO, Spain, under Grant TEC2016-78028C3-2-P and Grant TEC2017-86779-C2-2-R and in part by the European FEDER Funds.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Linear-Phase-Type probability modelling of functional PCA with applications to resistive memories

  • Ruiz-Castro, Juan E.
  • Acal, Christian
  • Aguilera, Ana M.
  • Roldán, Juan B.
  • Aguilera-Morillo, M. Carmen|||0000-0003-1027-9773
[EN] Functional principal component analysis (FPCA) based on Karhunen-Loeve (K-L) expansion allows to describe the stochastic evolution of the main characteristics associated to multiple systems and devices. Identifying the probability distribution of the principal component scores is fundamental to characterize the whole process. The aim of this work is to consider a family of statistical distributions that could be accurately adjusted to a previous transformation. Then, a new class of distributions, the linear-phase-type, is introduced to model the principal components. This class is studied in detail in order to prove, through the K-L expansion, that certain linear transformations of the process at each time point are phase-type distributed. This way, the one-dimensional distributions of the process are in the same linear-phase-type class. Finally, an application to model the reset process associated with resistive memories is developed and explained. (C) 2020 Published by Elsevier B.V. on behalf of International Association for Mathematics and Computers in Simulation (IMACS)., We would like to thank F. Campabadal and M.B. Gonzalez from the IMB-CNM (CSIC) in Barcelona for fabricating and providing the experimental measurements of the devices employed here. We acknowledge the support of the Spanish Ministry of Science, Innovation and Universities under projects TEC2017-84321-C4-3-R, MTM201788708-P, IJCI-2017-34038 (also supported by the FEDER, Spain program) and the PhD grant, Spain (FPU18/01779) awarded to Christian Acal. This work has made use of the Spanish ICTS Network MICRONANOFABS
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multicore optical fiber shape sensors suitable for use under gamma radiation

  • Barrera Vilar, David|||0000-0002-1700-6842
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Delepine-Lesoille, Sylvie
[EN] We have designed and implemented a fiber optic shape sensor for high-energy ionizing environments based on multicore optical fibers. We inscribed two fiber Bragg gratings arrays in a seven-core optical fiber. One of the arrays has been inscribed in a hydrogen-loaded fiber and the other one in an unloaded fiber in order to have two samples with very different radiation sensitivity. The two samples were coiled in a metallic circular structure and were exposed to gamma radiation. We have analyzed the permanent radiation effects. The radiation-induced Bragg wavelength shift (RI-BWS) in the hydrogen-loaded fiber is near ten times higher than the one observed for the unloaded fiber, with a maximum wavelength shift of 415 pm. However, the use of the multiple cores permits to make these sensors immune to RI-BWS obtaining a similar curvature error in both samples of approximately 1 cm without modifying the composition of the fiber, pre-irradiation or thermal treatment., Ministerio de Economia y Competitividad (DIMENSION TEC2017 88029- R); Generalitat Valenciana (IDI/FEDER/2018, PROMETEO 2017/103); H2020 Marie Sklodowska-Curie Actions (MSCA-ITN-ETN-722509); Universitat Politecnica de Valencia (PAID-01-18); Ministerio de Ciencia, Innovacion y Universidades (IJCI-2017-32476).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

New applications of late fusion methods for EEG signal processing

  • Safont, Gonzalo
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
[EN] Decision fusion consists in the combination of the outputs of multiple classifiers into a common decision that is more precise or stable. In most cases, however, only classical fusion techniques are considered. This work compares the performance of several state-of-the-art fusion methods on new applications of automatic stage classification of several neuropsychological tests. The tests were staged into three classes: stimulus display, retention interval, and subject response. The considered late fusion methods were: alpha integration; copulas; Dempster-Shafer combination; independent component analysis mixture models; and behavior knowledge space. Late fusion was able to improve the performance for the task, with alpha integration yielding the most stable result., This work was supported by Generalitat Valenciana under grant PROMETEO/2019/109 and Spanish Administration and European Union grant TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fiber Bragg Gratings for Medical Applications and Future Challenges: A Review

  • Lo Presti, Daniela
  • Massaroni, Carlo
  • Leitao, Catia Sofia Jorge
  • Domingues, Maria De Fátima
  • Sypabekova, Marzhan
  • Floris, Ignazio
  • Massari, Luca
  • Oddo, Calogero Maria
  • Iordachita, Iulian Ioan
  • Tosi, Daniele
  • Schena, Emiliano
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] In the last decades, fiber Bragg gratings (FBGs) have become increasingly attractive to medical applications due to their unique properties such as small size, biocompatibility, immunity to electromagnetic interferences, high sensitivity and multiplexing capability. FBGs have been employed in the development of surgical tools, assistive devices, wearables, and biosensors, showing great potentialities for medical uses. This paper reviews the FBG-based measuring systems, their principle of work, and their applications in medicine and healthcare. Particular attention is given to sensing solutions for biomechanics, minimally invasive surgery, physiological monitoring, and medical biosensing. Strengths, weaknesses, open challenges, and future trends are also discussed to highlight how FBGs can meet the demands of next-generation medical devices and healthcare system., This work was supported in part by INAIL (the Italian National Institute for Insurance against Accident at Work), through the BRIC (Bando ricerche in collaborazione) 2018 SENSE-RISC (Sviluppo di abiti intelligENti Sensorizzati per prevenzione e mitigazione di Rischi per la SiCurezza dei lavoratori) Project under Grant ID10/2018, in part by the UCBM (Universita Campus Bio-Medico di Roma) under the University Strategic HOPE (HOspital to the PatiEnt) Project, in part by the EU Framework Program H2020-FETPROACT-2018-01 NeuHeart Project under Grant GA 824071, by FCT/MEC (Fundacao para a Ciencia e Tecnologia) under the Projects UIDB/50008/2020 - UIDP/50008/2020, and by REACT (Development of optical fiber solutions for Rehabilitation and e-Health applications) FCT-IT-LA scientific action.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phosphorylcholine-based hydrogel for immobilization of biomolecules. Application to fluorometric microarrays for use in hybridization assays and immunoassays, and nanophotonic biosensing

  • Díaz-Betancor, Zeneida
  • Sanza, Francisco Javier
  • Casquel, Rafael
  • Laguna, María Fé
  • Holgado, Miguel
  • Bañuls Polo, María-José|||0000-0002-2422-7731
  • Puchades, Rosa|||0000-0002-9329-1593
  • Maquieira, Angel|||0000-0003-4641-4957
[EN] An approach is presented for covalent immobilization of biomolecules on an acrylate phosphorylcholine hydrogel. The immobilization and the hydrogel formation take place simultaneously by a thiol-acrylate coupling reaction, induced by UV-light (254nm). The hydrogel is prepared on two polymeric surfaces (the HardCoat protective layer of Blu-Ray discs, and SU-8) and applied to fluorescence microarray and label-free interferometric detection. For the first, Cy5 labeled analytes are used (lambda(em) 635nm) and, for the second, a periodic array of high-aspect ratio nanopillars detects unlabeled analytes by interferometry. Bioavailability of the immobilized probes is demonstrated in labeled assays; for the case of oligonucleotides by discriminating single nucleotide polymorphisms, and, for the case of antibodies, by BSA immunorecognition. The raw hydrogel is employed to detect human C-reactive protein, in both labeled and non-labeled assay formats, with sensitivities of 30ngmL(-1) and 2pgmL(-1), respectively., This research was funded by FEDER and the MINECO projects CTQ/2016/75749-R and TEC/2017/84846-R. The authors acknowledge the contribution of the Bc's D students Alejandra Vargas and Ismael Guerrero for the time spent at our lab and for their enthusiastic ideas on the possibilities of MPC hydrogel.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Modelado del scattering difuso en la banda de milimétricas

  • Andani, Francisco Javier
  • Pérez, Jesús R.
  • Torres, Rafael P.
  • Valle, Luis
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Bernardo-Clemente, Bernardo|||0000-0002-2781-7382
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] Propagation channel models based on ray-tracing techniques can estimate, with some details, the specular multipath components reaching the receiver antenna, but have difficulty to estimate diffuse components. In this paper, an empirical model to include diffuse scattering in ray-tracing channel models, or channel simulators, is proposed. The diffuse scattering model has been developed from channel measurements collected from 25 to 40 GHz in the frequency domain, in both line-of-sight (LOS) and obstructed-LOS (OLOS) propagation conditions, in an office environment. The accuracy of a raytracing software to estimate time-dispersion metrics is evaluated when the diffuse scattering model is taken into account., Este trabajo ha sido financiado en parte por el Ministerio de Economía, Industria y Competitividad a través de los proyectos TEC2017-86779-C2-1-R y TEC2017-86779-C2-2- R, a través de la Agencia Estatal de Investigación (AEI) y el Fondo Europeo de Desarrollo Regional (FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combining SfM Photogrammetry and Terrestrial Laser Scanning to Assess Event-Scale Sediment Budgets along a Gravel-Bed Ephemeral Stream

  • Conesa-García, Carmelo
  • Puig-Mengual, Carlos
  • Riquelme, Adrián
  • Tomás, Roberto
  • García-Lorenzo, Rafael
  • Pastor, José L.
  • Pérez-Cutillas, Pedro
  • Cano Gonzalez, Miguel
  • Martinez-Capel, Francisco|||0000-0003-4991-0251
[EN] Stream power represents the rate of energy expenditure along a stream reach and can be calculated using topographic data acquired via structure-from-motion (SfM) photogrammetry and terrestrial laser scanning (TLS). This study sought to quantitatively relate morphological adjustments in the Azohia Rambla, a gravel-bed ephemeral stream in southeastern Spain, to stream power (omega), critical power (omega(c)), and energy gradients ( partial differential omega/ partial differential s), along different reference channel reaches of 200 to 300 m in length. High-resolution digital terrain models (HRDTMs), combined with ortophotographs and point clouds from 2018, 2019, and 2020, and ground-based surveys, were used to estimate the spatial variability of morphological sediment budgets and to assess channel bed mobility during the study period at different spatial scales: reference channel reaches (RCRs), pilot bed survey areas (PBSAs), and representative geomorphic units (RGUs). The optimized complementary role of the SfM technique and terrestrial laser scanning allowed the generation of accurate and reliable HRDTMs, upon which a 1-D hydrodynamic model was calibrated and sediment budgets calculated. The resulting high-resolution maps allowed a spatially explicit analysis of stream power and transport efficiency in relation to volumes of erosion and deposition in the RCR and PBSA. In addition, net incision or downcutting and vertical sedimentary accretion were monitored for each flood event in relation to bedforms and hydraulic variables. Sediment sources and sinks and bed armoring processes showed different trends according to the critical energy and stream power gradient, which were verified from field observations. During flows exceeding bankfull discharges (between 18 and 24 m(3) s(-1) according to channel reach), significant variations in partial differential omega/ partial differential s values and omega/omega(c) ratios (e.g., -15 < partial differential omega/ partial differential s < 15 Wm(-3); omega/omega(c) > 2 for a peak discharge of 31 m(3) s(-1)) were associated with a large amount of bedload mobilized upstream and vertical accretion along the middle reach (average rise height of 0.20 to 0.35 m for the same event). By contrast, more moderate peak flows (<= 10 m(3) s(-1)) only produced minor changes resulting in surface washing, selective transport, and local bed scouring., This research was funded by ERDF/Spanish Ministry of Science, Innovation and Universities-State Research Agency/Project CGL2017-84625-C2-1-R (CCAMICEM); State Program for Research, Development and Innovation Focused on the Challenges of Society, the Spanish Ministry of Economy and Competitiveness (MINECO) and EU FEDER under Project TEC2017-85244-C2-1-P and by the University of Alicante (vigrob-157 and GRE18-05).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nonequilibrium quantum dynamics of partial symmetry breaking for ultracold bosons in an optical lattice ring trap

  • Zhao, Xinxin
  • McLain, Marie A.
  • Vijande, J.
  • Ferrando, A.
  • Carr, Lincoln D.
  • Garcia March, Miguel Angel|||0000-0001-7092-838X
[EN] A vortex in a Bose-Einstein condensate on a ring undergoes quantum dynamics in response to a quantum quench in terms of partial symmetry breaking from a uniform lattice to a biperiodic one. Neither the current, a macroscopic measure, nor fidelity, a microscopic measure, exhibit critical behavior. Instead, the symmetry memory succeeds in identifying the critical symmetry breaking at which the system begins to forget its initial symmetry state. We further identify a symmetry energy difference in the low lying excited states which trends with the symmetry memory., The authors thank Diego Alcala, Daniel Jaschke, Marc Valdez, and BiaoWufor helpful discussions. LDC acknowledges the University of Valencia for graciously hosting him on several occasions throughout work on this project. MAGM acknowledges the Fulbright commision, the Spanish Ministry MINECO (National Plan 15 Grant: FISICATEAMO No. FIS2016-79508-P, SEVEROOCHOA No. SEV-2015-0522), Fundacio Privada Cellex, Generalitat de Catalunya (AGAUR Grant No. 2017 SGR 1341 and CERCA/Program), ERC AdG OSYRIS, EUFETPRO QUIC, and the National Science Centre, Poland-Symfonia Grant No. 2016/20/W/ST4/00314. This material is based in part upon work supported by Ministerio de Educacion y Ciencia and EU FEDER under Contract FPA2016-77177 and by Generalitat Valenciana PrometeoII/2014/066(JV), UV-INV-AE16-514545 and MINECO TEC2017-86102-C2-1-R (AF), the US National Science Foundation under grant numbers PHY-1806372, PHY-1748958 OAC-1740130, and CCF-1839232 (LDC), the US Air Force Office of Scientific Research grant number FA9550-14-1-0287 (LDC), the Alexander von Humboldt Foundation (LDC), the Heidelberg Center for Quantum Dynamics (LDC), and the China Scholarship Council (XXZ).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A new method for fraud detection in credit cards based on transaction dynamics in subspaces

  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Safont, Gonzalo
[EN] This paper presents a new method for fraud detection in credit cards based on exploiting the dynamics of the card transactions. We hypothesize different behavior models in the use of the card between legitimate clients and fraudsters that are registered in the sequential pattern that follows the transactions. The method considers analyses in subspaces defined by two or three variables recorded in the transactions. From these subspaces, several dynamic features, such as transaction velocity and acceleration, are estimated as input vectors for a classification process. Linear and quadratic discriminant analysis and random forest are implemented as single classifiers. All the single classification results obtained for each of the subspaces are late fused to obtain an overall result using alpha integration algorithm. The proposed method was evaluated using a subset of real data with a very low fraud to legitimate transaction ratio. We demonstrated that the temporal dependence of card transactions exploited in different subspaces and fused to give an overall result improves the detection accuracy of fraud detection in credit cards., This work was supported by Generalitat Valenciana under grant PROMETEO/2019/109, and Spanish Administration and European Union grant TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Curvature, twist and pose measurements using fiber Bragg gratings in multi-core fiber: A comparative study between helical and straight core fibers

  • Khan, Fouzia
  • Misra, Sarthak
  • Barrera Vilar, David|||0000-0002-1700-6842
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This paper presents a technique to acquire measurements of curvature, twist and pose for two multi-core fibers; one with straight cores and the other with helical cores. Both the fibers have multiple fiber Bragg grating (FBG) sensors inscribed in the cores and the fibers are placed in known configurations in order to compare their measurement accuracy. For the curvature measurements both the fibers are placed in constant curvature slots; for the twist measurements, a set of twists are applied to each fiber and for the pose measurements the fibers are placed in molds of different shape. The mean curvature errors are 0.22 and 0.13 m(-1), in the helical and straight core fiber respectively. For the twist measurement the mean errors are 26.57 degrees 1m and 146.50 degrees 1m in the helical and straight core fiber, respectively. Lastly, the pose measurement consists of position and orientation where the orientation is represented in the axis-angle form. The mean position errors are 0.49 and 0.27 mm, the mean axis orientation errors are 0.12 degrees and 0.26 degrees degrees and the mean angle orientation errors are 1.10 degrees and 1.18 degrees, for the helical and straight core fiber, respectively. The results show that the twist measurement error is significantly low with the helical core fiber, thus helical core fiber is better suited than straight core fiber for applications where twist measurements are required., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement #688279 (EDEN2020). It was also partially supported by the Spanish Ministry of Economy and Competitiveness under the project DIMENSION TEC2017-88029-R. The work of D. Barrera was supported by Spanish MICINN fellowship IJCI-2017-32476. The funding sources were not involved in the research nor in the preparation of the article.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

A Multisensor System for Road Surface Identification

  • Safont, Gonzalo
  • Rodríguez, Alberto
  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
[EN] This work introduces a multisensor road surface identification system that considers features from four different kind of sensors: microphones, accelerometers, speed signals, and handwheel signals. Features are extracted separately from each sensor, joined together, and then filtered using feature selection before classification. The proposed system was tested on a set of signals extracted from a specially-converted passenger car driving on a closed course. Three types of road surfaces were considered: smooth flat asphalt, cobblestones, and stripes. Three classifiers were considered: linear discriminant analysis, support vector machines, and random forests. All the considered classifiers reached over 90% accuracy, with a maximum accuracy of 96.52% for RDF. These results show the potential of the proposed system for road surface identification., This work was supported by Spanish Administration and European Union grant TEC2017-84743-P, and Generalitat Valenciana under grant PROMETEO/2019/109.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Measurement uncertainty of multicore optical fiber sensors used to sense curvature and bending direction

  • Floris, Ignazio
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Adam, Jose M|||0000-0002-9205-8458
[EN] This paper describes a study of the influence of strain measurement uncertainty on sensing curvature and bending direction, considering one of the most widely used fiber geometries for sensing applications (7-core Multicore Fiber) with different core spacings (distance between outer cores and fiber axis). The Monte Carlo method was proposed to simulate the real measurement process and 33 simulations with 106 iterations were performed to determine the laws of propagation of strain measurement uncertainty in calculating curvature and bending direction. The outcomes, which show the strong influence of strain uncertainty and core spacing on the precision of Multicore Fiber sensors, can be used to support the design of new sensors or new fiber geometry and to predict their achievable performance., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement No 722509. It was also supported by the Ministry of Economy and Competitiveness of Spain under the project DIMENSION TEC-2017-88029-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Folded Normal Distribution: A New Model for the Small-Scale Fading in Line-of-Sight (LOS) Condition

  • Reig, Juan|||0000-0003-4541-9326
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Martínez-Inglés, María T.
  • Molina-García-Pardo, José María
[EN] In this paper, a novel form of the folded normal (FN) distribution has been proposed to model the small-scale fading in wireless communications. From a multiple-input multiple-output (MIMO) measurement campaign conducted in a lab environment with the line-of-sight (LOS) conditions at both the 60 and the 94 GHz bands, the authors obtain the parameters of the Rician, FN, and kappa-mu distributions. These parameters have been calculated by using the least square (LS) approximation and with techniques of statistical inference. The FN distribution provides the best fitting to the experimental results using the Kolmogorov-Smirnov (K-S) test for the inferred estimators with values of the ful llment of 100% and 69.82% at the 60 and 94 GHz bands, respectively, for a significance level of 1%., This work was supported by the Ministerio de Economia, Industria y Competitividad of the Spanish Government under the national projects TEC2017-86779-C2-2-R and TEC2016-78028-C3-2-P, through the Agencia Estatal de Investigacion (AEI) and the Fondo Europeo de Desarrollo Regional (FEDER).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature-insensitive optical tilt sensor based on a single eccentric-core fiber Bragg grating

  • Zheng, D.
  • Cai, Z.
  • Floris, Ignazio
  • Pan, W.
  • Zou, X.
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] This Letter presents a simple temperature-insensitive optical tilt sensor based on a single eccentric-core fiber Bragg grating (ECFBG). By partly inserting an ECFBG into a ceramic ferrule, the reflection spectrum of the ECFBG splits into two peaks as a result of the applied tilt angle. The magnitude and direction of inclination in one dimension can be determined by monitoring the wavelength separation between both peaks, which is inherently insensitive to temperature. The proposed tilt sensor has a good linear response within a wide dynamic range of +/- 45 degrees, with a sensitivity of 0.012 nm/degrees, with a resolution of 0.83 degrees, and with an accuracy of 0.41 degrees. Being free from any inherent mechanical joint/friction, along with the advantages of a compact structure, good repeatability, and low cost, the proposed sensor is highly suitable for practical engineering applications. (C) 2019 Optical Society of America, National Natural Science Foundation of China (61405166, 61775185); Sichuan Province Science and Technology Support Program (2018HH0002); Higher Education Discipline Innovation Project (B18045); Ministerio de Economia y Competitividad (DIMENSION TEC2017 88029-R); Horizon 2020 Framework Programme (722509).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pattern recognition techniques for provenance classification of archaeological ceramics using ultrasounds

  • Salazar Afanador, Addisson|||0000-0001-5849-5104
  • Vergara Domínguez, Luís|||0000-0001-6803-4774
  • Vidal, Enrique|||0000-0003-4579-5196
  • Safont Armero, Gonzalo
[EN] This paper presents a novel application of pattern recognition to the provenance classification of archae- ological ceramics. This is a challenging problem for archaeologists, which involves assigning a making location to a fragment of archaeological pottery that was found along with other fragments of pieces made in different distant locations from the find. The pieces look very similar to each other and, often, other contextual information about the use of the pieces cannot be used due to the small size of the fragments. Current standard methods to solve this problem are limited since they are time consuming, require costly equipment, and can lead to the destruction of a part of the pieces. The proposed method overcome those limitations using non-destructive ultrasonic testing and incorporates versatile data anal- ysis through advanced pattern recognition techniques. Those techniques include the following: feature ranking, sample augmentation, semi-supervision based on active learning; and optimal fusion. This latter is based in the concept of alpha integration, which allows optimal fitting of the fusion model parameters. Different provenance classification problems are showcased: provenance classification of terra sigillata ce- ramic pieces from Aretina, Northern Italy and Sud-Gaul origins; and provenance classification of Iberian ceramic pieces from archaeological sites of Paterna, and Les Jovaes in Valencia, Spain. We demonstrate that the proposed fusion-based method achieves the best results, in terms of balanced classification ac- curacy and F1 score, compared with competitive methods like linear discriminant analysis, random forest, and support vector machine. Experiments for simulating small sample sizes and uncertainty in labeling of the pieces are included. In addition, the paper provides a design of a practical specialized device that could be used in different applications of archaeological ceramic classification., This work was supported by Spanish Administration and European Union under grant TEC2017-84743-P.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Remote Sensing and UAVs for the Geomorphological and Habitat Analysis in Ephemeral and Permanent Mediterranean Streams

  • Puig Mengual, Carlos Antonio
[ES] Los ecosistemas riparios presentan una gran variabilidad, desde un punto de vista geomorfológico como hidrológico y ecológico, incluyendo las complejas interacciones que la morfología y la vegetación de ribera puede presentar. La vegetación se presenta como un factor físico muy influyente en los sistemas fluviales, con una relación directa en los procesos geomorfológicos que tienen lugar en los corredores fluviales. La detección, monitoreo y evaluación de los procesos que se desarrollan en el espacio ripario son clave a la hora de poder entender las funciones ecológicas y el desarrollo de dichos hábitats, y por tanto para tomar decisiones para su conservación y restauración. Según la distribución de especies y los rasgos de las plantas, las comunidades vegetales y su dinámica presentan distintas características en el ecosistema ripario, a las cuales los métodos de detección y monitoreo deben adaptarse. Los constantes cambios que sufren estos espacios a lo largo del tiempo se deben en gran parte a procesos físicos relacionados con las dinámicas de erosión y sedimentación, las variaciones de la trayectoria del cauce, variaciones en la distribución de especies y vegetación en el bosque de ribera, etc., pero también se deben al impacto antropogénico, que puede llegar a generar grandes desajustes en la dinámica ecológica de los ecosistemas en cuestión. Debido a las interacciones de diversos procesos y alteraciones antropogénicas, y las complejas dinámicas espacio-temporales, resulta necesario continuar desarrollando metodologías teóricas y prácticas para la monitorización y caracterización de estos ecosistemas. La teledetección, incluyendo el uso de drones, se presenta como una herramienta muy interesante y óptima para el mapeo y recogida de información en estos espacios naturales. Los beneficios que demuestran las aeronaves no tripuladas -UAV- incluyen las mejoras en la resolución espacial y temporal de los datos capturados, así como la cartografía de áreas extensas en poco tiempo, lo que los convierte en instrumentos clave en tareas de gestión y conservación de los espacios riparios. La necesidad de estudiar la dinámica geomorfológica que se produce en los cauces fluviales ha sido la principal motivación en los estudios que se presentan en esta tesis doctoral. Los capítulos 2 y 3 se basan en técnicas de captura de datos con láser escáner terrestre (TLS) y en el modelado de los datos obtenidos en vuelos fotogramétricos de UAV. Con ellos se han caracterizado los procesos que tienen lugar en una cierta área de estudio, un cauce efímero del sureste de la Península Ibérica, la Rambla de la Azohía (Murcia). Estos estudios también han permitido comparar el ajuste y precisión de los datos capturados a partir de dos técnicas distintas. Además, el interés en caracterizar los cauces fluviales con un flujo permanente ha motivado el estudio de la topografía sumergida en un tramo de río, segmentado por tipos de mesohábitat. Así pues, el capítulo 4 presenta un algoritmo y una herramienta de corrección para el efecto de la refracción en un tramo del rio Palancia (Castellón), para llevar a cabo la correcta representación de la morfología del lecho sumergido. A partir de la metodología planteada y el algoritmo desarrollado, es posible minimizar los efectos de distorsión debidos a la presencia del agua, para obtener la reconstrucción tridimensional del lecho a partir de imágenes tomadas con UAV. La construcción del modelo 3D se llevó a cabo mediante la técnica de Structure from Motion. Finalmente, y como elemento clave en la dinámica de los ecosistemas riparios, el capítulo 5 desarrolla una metodología para clasificar las fases de sucesión de la vegetación del bosque ripario. Dichas fases de sucesión se basan en la metodología del proyecto RIPFLOW, que también está implementada en el modelo dinámico CASiMiR-vegetation., [CA] Els ecosistemes riparis presenten una gran variabilitat, des d'un punt de vista geomorfològic com a hidrològic i ecològic, incloent les complexes interaccions que la morfologia i la vegetació de ribera pot presentar. La vegetació es presenta com un factor físic molt influent en els sistemes fluvials, amb una relació directa en els processos geomorfològics que tenen lloc en els corredors fluvials. La detecció, monitoratge i avaluació dels processos que es desenvolupen en l'espai ripari són clau a l'hora de poder entendre les funcions ecològiques i el desenvolupament d'aquests hàbitats, i per tant per a prendre decisions per a la seua conservació i restauració. Segons la distribució d'espècies i els trets de les plantes, les comunitats vegetals i la seua dinàmica presenten diferents característiques en l'ecosistema ripario, a les quals els mètodes de detecció i monitoratge han d'adaptar-se. Els constants canvis que pateixen aquests espais al llarg del temps es deuen en gran part a processos físics relacionats amb les dinàmiques d'erosió i sedimentació, les variacions de la trajectòria del llit, variacions en la distribució d'espècies i vegetació en el bosc de ribera, etc., però també es deuen a l'impacte antropogènic, que pot arribar a generar grans desajustaments en la dinàmica ecològica dels ecosistemes en qüestió. A causa de les interaccions de diversos processos i alteracions antropogèniques, i les complexes dinàmiques espaciotemporals, resulta necessari continuar desenvolupant metodologies teòriques i pràctiques per al monitoratge i caracterització d'aquests ecosistemes. La teledetecció, incloent l'ús de drons, es presenta com una eina molt interessant i òptima per al mapatge i recollida d'informació en aquests espais naturals. Els beneficis que demostren les aeronaus no tripulades -UAV- inclouen les millores en la resolució espacial i temporal de les dades capturades, així com la cartografia d'àrees extenses en poc temps, la qual cosa els converteix en instruments clau en tasques de gestió i conservació dels espais riparis. La necessitat d'estudiar la dinàmica geomorfològica que es produeix en els llits fluvials ha sigut la principal motivació en els estudis que es presenten en aquesta tesi doctoral. Els capítols 2 i 3 es basen en tècniques de captura de dades amb làser escàner terrestre (TLS) i en el modelatge de les dades obtingudes en vols fotogramètrics de UAV. Amb ells s'han caracteritzat els processos que tenen lloc en una certa àrea d'estudi, un llit efímer del sud-est de la Península Ibèrica, la Rambla de la Azohía (Múrcia). Aquests estudis també han permés comparar l'ajust i precisió de les dades capturades a partir de dues tècniques diferents. A més, l'interés a caracteritzar els llits fluvials amb un flux permanent ha motivat l'estudi de la topografia submergida en un tram de riu, segmentat per tipus de mesohábitat. Així doncs, el capítol 4 presenta un algorisme i una eina de correcció per a l'efecte de la refracció en un tram del va riure Palància (Castelló), per a dur a terme la correcta representació de la morfologia del llit submergit. A partir de la metodologia plantejada i l'algorisme desenvolupat, és possible minimitzar els efectes de distorsió deguts a la presència de l'aigua, per a obtindre la reconstrucció tridimensional del llit a partir d'imatges preses amb UAV. La construcció del model 3D es va dur a terme mitjançant la tècnica de Structure from Motion. Finalment, i com a element clau en la dinàmica dels ecosistemes riparis, el capítol 5 desenvolupa una metodologia per a classificar les fases de successió de la vegetació del bosc ripari. Aquestes fases de successió es basen en la metodologia del projecte RIPFLOW, que també està implementada en el model dinàmic CASiMiR-vegetation., [EN] Riparian ecosystems show great variability, from a geomorphological, hydrological and ecological point of view, including the complex interactions that riparian morphology and vegetation can present. Vegetation appears as a very influential physical factor in river systems, with a direct relationship in the geomorphological processes that take place in river corridors. The detection, monitoring and evaluation of the processes that take place in the riparian space are key when it comes to understanding the ecological functions and development of these habitats, and therefore for making decisions for their conservation and restoration. According to the distribution of species and plant traits, plant communities and their dynamics present different characteristics in the riparian ecosystem, to which detection and monitoring methods must be adapted. The constant changes that these spaces undergo over time are largely due to physical processes related to the dynamics of erosion and sedimentation, variations in the path of the channel, variations in the distribution of species and vegetation in the riparian forest, etc. These processes also are due to the anthropogenic impact, which can generate major imbalances in the ecological dynamics of the ecosystems in question. Due to the interactions of various anthropogenic processes and alterations, and the complex spatio-temporal dynamics, it is necessary to continue developing theoretical and practical methodologies for the monitoring and characterization of these ecosystems. Remote sensing, including the use of drones, is presented as a very interesting and optimal tool for mapping and collecting information in these natural spaces. The benefits demonstrated by unmanned aircraft -UAV- include improvements in the spatial and temporal resolution of the captured data, as well as the mapping of large areas in a short time, which makes them key instruments in the management and conservation tasks of riparian spaces. The need to study the geomorphological dynamics that occur in river channels has been the main motivation in the studies presented in this doctoral thesis. Chapters 2 and 3 are based on ground-based laser scanner (TLS) data capture techniques and modelling of UAV photogrammetric flight data. They have characterized the processes that take place in a certain study area, an ephemeral riverbed in the southeast of the Iberian Peninsula, the Rambla de la Azohía (Murcia). These studies have also made it possible to compare the fit and precision of the data captured from two different techniques. In addition, the interest in characterizing the fluvial channels with a permanent flow has motivated the study of the submerged topography in a stretch of river, segmented by types of mesohabitat. Thus, chapter 4 presents an algorithm and a correction tool for the effect of refraction in a stretch of the Palancia river (Castellón), to carry out the correct representation of the submerged bed morphology. From the proposed methodology and the developed algorithm, it is possible to minimize the distortion effects due to the presence of water, to obtain the three-dimensional reconstruction of the bed from images taken with UAVs. The construction of the 3D model was carried out using the Structure from Motion technique. Finally, and as a key element in the dynamics of riparian ecosystems, chapter 5 develops a methodology to classify the phases of succession of riparian forest vegetation. These succession phases are based on the RIPFLOW project methodology, which is also implemented in the dynamic CASiMiR-vegetation model., Agradezco a Francisca Segura y a Carles Sanchis por su ayuda y trabajo conjunto en el proyecto “Natural and anthropogenic changes in Mediterranean river drainage basins: historical impacts on rivers morphology, sedimentary flows and vegetation” financiado por el Ministerio de Economía y Competitividad (MINECO) (CGL2013-44917-R). Agradezco también a la Universidad de Murcia y la Universidad de Alicante así como al proyecto de investigación “Respuesta morfológica y sistémica al cambio climático en cauces efímeros mediterráneos: dinámica, resiliencia y propuestas de actuación” funded by ERDF/Spanish Ministry of Science, Innovation and Universities—State Research Agency/Project CGL2017-84625-C2-1-R (CCAMICEM); State Program for Research, Development and Innovation Focused on the Challenges of Society, del Ministerio de Economía y Competitividad (MINECO) y EU FEDER (Project TEC2017- 85244-C2-1-P) y de la Universidad de Alicante (vigrob-157 and GRE18-05).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluación de la estabilidad de taludes rocosos a partir de nubes de puntos 3D obtenidas con un vehículo aéreo no tripulado, Evaluation of the stability of rocky slopes using 3D point clouds obtained from an unmanned aerial vehicle

  • Tomás, R.
  • Riquelme, A.
  • Cano, M.
  • Pastor, J. L.
  • Pagán, J. I.
  • Asensio, J. L.
  • Ruffo, M.
[ES] En este trabajo se describe una metodología propuesta para la identificación semiautomática de discontinuidades y el posterior análisis cinemático y de estabilidad a través de su aplicación a una trinchera excavada en roca de una línea de ferrocarril. La adquisición de imágenes se ha llevado a cabo mediante un vehículo aéreo no tripulado de seis rotores para su posterior restitución fotogramétrica a través de la técnica digital Structure from Motion (SfM) mediante el programa Agisoft Metashape que proporciona una nube de puntos 3D. A partir de esta nube de puntos, se han identificado cuatro familias de discontinuidades (J1, J2, J3 y J4) que afectan al talud haciendo uso del programa de código abierto Discontinuity Set Extractor (DSE). Finalmente, se han llevado a cabo análisis cinemáticos y de estabilidad de las posibles roturas de bloques a favor de las discontinuidades identificadas en el talud. Los resultados muestran tres potenciales roturas por cuña y una plana que han sido validadas cualitativamente mediante el análisis de la geometría de las nubes de puntos., [EN] In this work, a methodology proposed for the semiautomatic identification of discontinuities and the later kinematic and stability analyses is described through its application to a rocky railway line cutting. Image acquisition has been performed using a six-rotors unmanned aerial vehicle for their subsequent photogrammetric restitution by means of the digital technique Structure from Motion (SfM) by means of the software Agisoft Metashape that provides a 3D point cloud. From this 3D point cloud, four discontinuity sets (J1, J2, J3 and J4) affecting the cutting have been identified using the open source software Discontinuity Set Extractor (DSE). Finally, kinematic and stability analyses of the potential block failures controlled by the discontinuities identified in the cutting. The results show three potential wedge and planar failures that have been qualitatively validated trough the geometric analysis of the 3D point cloud., Este trabajo se ha realizado en el marco del proyecto MOMIT, recibiendo financiación de Shift2Rail Joint Undertaking perteneciente al programa de investigación e innovación H2020 de la Unión Europea a través de la subvención No 777630, del proyecto de la Universidad de Alicante GRE18-05 y del proyecto TEC2017-85244-C2-1-P del Ministerio de Economía y Competitividad (MINECO) y EU FEDER. Los autores quieren dar las gracias a José Miguel García Torres (Geotor S.L.) por la fotografía del UAV incluida en la Figura 1.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Transmisiones a 28GHz y 37GHz en interiores de trenes aplicando técnicas MISO-OFDM

  • Sanchis Borrás, Concepción
  • Molina-García-Pardo, José-María
  • Pascual García, Juan
  • Llacer, Leandro J.
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] This paper analyses a simulation of performance in an intra-wagon environment based on four scenarios. The 28 GHz and the 37 GHz bands are assessed for the use of 5G millimeter (mmWave) communications. The main objective was to analyses different multiple-input single-output orthogonal frequency division multiplexing (MISO-OFDM) techniques such as Hadamard quasiorthogonal space-time block code (HQSTBC) and transmit beamforming to analyze the throughput achieved as a function of the signal-to-noise ratio (SNR) applied. Starting from a measurement campaign, the performance is analyzed by scenario, applied band and in terms of the two algorithms used. In addition, the results are simulated with 4 and 8 transmitting antennas., Este trabajo ha sido financiado en parte por los proyectos PID2019-107885GB-C33 y TEC2017-86779-C2-2-R (AEI/FEDER, UE). Agradecer a Julia Iserte Villalba y Francisco M. Brox Lopez (personal de FGV) por facilitar la campaña de medidas.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transition technologies towards 6G networks

  • Raddo, Thiago R.
  • Rommel, Simon
  • Cimoli, Bruno
  • Vagionas, Chris
  • Pérez-Galacho, Diego
  • Pikasis, Evangelos
  • Grivas, Evangelos
  • Ntontin, Konstantinos
  • Katsikis, Michael
  • Kritharidis, Dimitrios
  • Ruggeri, Eugenio
  • Spaleniak, Izabela
  • Dubov, Mykhaylo
  • Klonidis, Dimitrios
  • Kalfas, George
  • Pleros, Nikos
  • Tafur Monroy, Idelfonso
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] The sixth generation (6G) mobile systems will create new markets, services, and industries making possible a plethora of new opportunities and solutions. Commercially successful rollouts will involve scaling enabling technologies, such as cloud radio access networks, virtualization, and artificial intelligence. This paper addresses the principal technologies in the transition towards next generation mobile networks. The convergence of 6G key-performance indicators along with evaluation methodologies and use cases are also addressed. Free-space optics, Terahertz systems, photonic integrated circuits, softwarization, massive multiple-input multiple-output signaling, and multi-core fibers, are among the technologies identified and discussed. Finally, some of these technologies are showcased in an experimental demonstration of a mobile fronthaul system based on millimeter 5G NR OFDM signaling compliant with 3GPP Rel. 15. The signals are generated by a bespoke 5G baseband unit and transmitted through both a 10 km prototype multi-core fiber and 4 m wireless V-band link using a pair of directional 60 GHz antennas with 10 degrees beamwidth. Results shown that the 5G and beyond fronthaul system can successfully transmit signals with both wide bandwidth (up to 800 MHz) and fully centralized signal processing. As a result, this system can support large capacity and accommodate several simultaneous users as a key candidate for next generation mobile networks. Thus, these technologies will be needed for fully integrated, heterogeneous solutions to benefit from hardware commoditization and softwarization. They will ensure the ultimate user experience, while also anticipating the quality-of-service demands that future applications and services will put on 6G networks., This work was partially funded by the blueSPACE and 5G-PHOS 5G-PPP phase 2 projects, which have received funding from the European Union's Horizon 2020 programme under Grant Agreements Number 762055 and 761989. D. PerezGalacho acknowledges the funding of the Spanish Science Ministry through the Juan de la Cierva programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bend-Direction and Rotation Plastic Optical Fiber Sensor

  • Sartiano, Demetrio
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Geernaert, Thomas
  • Torres Roca, Elena
[EN] A plastic filament of poly (methyl methacrylate) (PMMA) was fabricated by extrusion. The mode confinement was simulated using numerical software. The idea is to study how the light intensity changes inside the plastic optical fiber (POF) when a bending in multiple directions is applied. The results obtained from the simulation were compared to the experimental observations. The non-circular shape of the POF allows sensing a rotation applied as well. The angle of rotation was obtained processing two images of the end facet of the fiber (one with the fiber in a reference position and one with the rotated fiber), using an intensity-based automatic image registration. The accuracy in the rotation calculation was of 0.01 degrees., FINESSE project, funded by the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Action grant agreement no 722509. Ministry of Economy and Competitiveness project DIMENSION TEC2017 and by the Generalitat Valenciana project PROMETEO 2017/017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design and Characterization of ITO-Covered Resonant Nanopillars for Dual Optical and Electrochemical Sensing

  • Tramarin, Luca
  • Casquel, Rafael
  • Gil-Rostra, Jorge
  • Herrero-Labrador, Raquel
  • Murillo, Ana María M.
  • Laguna, María Fé
  • González-Elipe, Agustín R.
  • Holgado, Miguel
  • González Martínez, Miguel Ángel|||0000-0002-5104-1262
  • Bañuls Polo, María-José|||0000-0002-2422-7731
[EN] In this work we present a dual optical and electrochemical sensor based on SiO2/Si3N4 resonant nanopillars covered with an indium tin oxide (ITO) thin film. A 25-30 nm thick ITO layer deposited by magnetron sputtering acts as an electrode when incorporated onto the nanostructured array, without compromising the optical sensing capability of the nanopillars. Bulk sensing performances before and after ITO deposition have been measured and compared in accordance with theoretical calculations. The electrochemical activity has been determined by the ferri/ferrocyanide redox reaction, showing a remarkably higher activity than that of flat thin films of similar ITO nominal thickness, and proving that the nanopillar system covered by ITO presents electrical continuity. A label-free optical biological detection has been performed, where the presence of amyloid-beta has been detected through an immunoassay enhanced with gold nanoparticles. Again, the experimental results have been corroborated by theoretical simulations. We have demonstrated that ITO can be a beneficial component for resonant nanopillars sensors by adding potential electrochemical sensing capabilities, without significantly altering their optical properties. We foresee that resonant nanopillars coated with a continuous ITO film could be used for simultaneous optical and electrochemical biosensing, improving the robustness of biomolecular identification., This research was funded by the Spanish Ministry (Ministerio de Economia y Competitividad) under project HERON (Grant TEC2017-84846-R). Moreover, the work of L. Tramarin was supported by the predoctoral contract of the Universidad Politecnica de Madrid.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effects of core position uncertainty on optical shape sensor accuracy

  • Floris, Ignazio
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
  • Adam, Jose M|||0000-0002-9205-8458
[EN] Optical fiber sensors are now widely recognized as extremely reliable instruments to sense strain. Optical shape sensors consist of multiple single-core optical fibers or multicore optical fibers capable of sensing bending direction and curvature by comparing the longitudinal strain of different cores in an instrumented section and reconstructing the sensor shape. This paper describes a study on the effects of core position errors on the precision of optical shape sensors when measuring strain, bending direction and curvature, and identifies the role of measured curvature and core spacing (distance between section center and external cores), considering 7, 4, and 3-core fiber geometries, three of those most widely employed for sensing applications. The Monte Carlo technique was utilized to reproduce the measurement process. Forty-five simulations, including 3.10(6) trials, were carried out for each geometry with the aim of investigating the law of uncertainty propagation. The results of the analysis, applicable to both multiple single-core fibers and multicore optical sensors equipped with distributed or quasi-distributed strain-sensors, show the effects of core position uncertainty and will be useful for new sensor designs and user options by predicting the achievable performance of these devices., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement No 722509. It was also supported by the Ministry of Economy and Competitiveness of Spain under the project DIMENSION TEC2017-88029-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Temperature-insensitive curvature sensor based on Bragg gratings written in strongly coupled multicore fiber

  • Liu, Zhiming
  • Zheng, Di
  • Villatoro, Joel
  • Antonio-Lopez, J. Enrique
  • Schülzgen, Axel
  • Amezcua-Correa, Rodrigo
  • Zou, Xihua
  • Pan, Wei
  • Madrigal-Madrigal, Javier|||0000-0003-3156-1321
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] A novel temperature-insensitive optical curvature sensor has been proposed and demonstrated. The sensor is fabricated by inscribing fiber Bragg gratings with short lengths into a piece of strongly coupled multicore fiber (SCMCF) and spliced to the conventional single-mode fiber. Due to the two supermodes being supported by the SCMCF, two resonance peaks, along with a deep notch between them, were observed in the reflection spectrum. The experimental results show that the depth of the notch changes with the curvature with a sensitivity up to 15.9dB/m-1 in a lower curvature range. Besides, thanks to the unique property of the proposed sensor, the notch depth barely changes with temperature. Based on the intensity demodulation of the notch depth, the temperature-insensitive curvature sensor is achieved with the cross sensitivity between the temperature, and the curvature is as low as 0.001m-1/¿C., National Natural Science Foundation of China (62071395); the 111 Project (B18045); Sichuan Province Science and Technology Support Program (2020YJ0329); Universitat Politècnica de València (PAID-01-18); Ministerio de Economía y Competitividad (PGC2018-101997-B-I00, TEC2017-88029-R).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fiber Optic Refractive Index Distributed Multi-Sensors by Scattering-Level Multiplexing With MgO Nanoparticle-Doped Fibers

  • Ayupova, Takhmina
  • Shaimerdenova, Madina
  • Korganbayev, Sanzhar
  • Sypabekova, Marzhan
  • Bekmurzayeva, Aliya
  • Blanc, Wilfried
  • Guo, Tuan
  • Molardi, Carlo
  • Tosi, Daniele
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] In this work, we present the architecture of a multiplexed refractive index (RI) sensing system based on the interrogation of Rayleigh backscattering. The RI sensors are fabricated by fiber wet-etching of a high-scattering MgO nanoparticle-doped fiber, without the need for a reflector or plasmonic element. Interrogation is performed by means of optical backscatter reflectometry(OBR), which allows a detection with a millimeter-level spatial resolution. Multiplexing consists of a simultaneous scan of multiple fibers, achieved by means of scattering-level multiplexing (SLMux) concept, which uses the backscattered power level in each location as a diversity element. The sensors fabricated have sensitivity in the order of 0.473-0.568 nm/RIU (in one sensing point) and have been simultaneously detected together with a distributed temperature sensing element for multi-parameter measurement. An experimental setup has been prepared to demonstrate the capability of each sensing region to operate without cross-talk, while operating multi-fiber detection., This work was supported in part by the ORAU Programme at Nazarbayev University (LIFESTART and FOSTHER Grants), in part by the Agence Nationale de la Recherche (ANR) Project NanoSlim under Grant ANR-17-17-CE08-0002, in part by the National Natural Science Foundation for Excellent Youth Foundation of China under Grant 61722505, in part by the Key Program of Guangdong Natural Science Foundation under Grant 2018B030311006, and in part by The Spanish Ministry of Economy and Competitiveness under Grant DIMENSION TEC2017 88029-R. The associate editor coordinating the review of this article and approving it for publication was Prof. Marco Petrovich.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Empirical Characterization of the Indoor Radio Channel for Array Antenna Systems in the 3 to 4 GHz Frequency Band

  • Pérez, Jesús R.
  • TORRES JIMÉNEZ, RAFAEL PEDRO
  • Basterrechea, José
  • Domingo, Marta
  • Rubio Arjona, Lorenzo|||0000-0003-3882-4673
  • Rodrigo Peñarrocha, Vicent Miquel|||0000-0002-8075-4851
  • Reig, Juan|||0000-0003-4541-9326
[EN] Concerning the design and planning of new radio interfaces for the fifth-generation (5G) systems, this paper presents a useful contribution to the characterization of the wideband indoor radio channel in the 3-4-GHz frequency band. A measurement campaign has been carried out in two different indoor scenarios to analyze some of the most important wideband parameters of the propagation channel, including a thorough analysis of its behavior to meet the new radio technology challenges. The channel measurement setup consists of a virtual vertical uniform array at the receiver side of the link that remains at a fixed position, whereas the transmitter side, which is equipped with a single antenna, is placed at different positions in the environment under analysis. The measurement setup emulates the up-link of a multi-user multiple-input multiple-output (MIMO) system and allows obtaining the broadband parameters of the multiple channels that are established between the transmitter and each one of the antennas of the receiver array. The results and conclusions about the path loss, temporal dispersion, and coherence bandwidth are included, along with an analysis of the spatial correlation between wideband channels when one of the antennas is an array., This work was supported by the Spanish Ministerio de Economia, Industria y Competitividad under Project TEC2017-86779-C2-1-R and Project TEC2017-86779-C2-2-R.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fiber Optic Shape Sensors: A comprehensive review

  • Floris, Ignazio
  • Adam, Jose M|||0000-0002-9205-8458
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Sales Maicas, Salvador|||0000-0001-9457-976X
[EN] Fiber Optic Shape Sensing is an innovative Optical Fiber Sensing Technology that uses a fiber optic cable to continuously track the 3D shape and position of a dynamic object (with unknown motion) in real-time without visual contact. This technology offers a valid alternative to existing shape sensing methods, thanks to a combination of advantages (including ease of installation, intrinsic safety, compactness, flexibility, electrically passive operation, resistance to harsh environments and corrosion, no need for proximity or computational or numerical models to reconstruct shape) that can bring remarkable improvements to the fields of Civil, Mechanical and Aerospace Engineering, Biomedicine and Medicine. A considerable research effort has been dedicated to this subject in the last twenty years. This paper presents an ambitious review of the current state of the art of Fiber Optic Shape Sensors (FOSS) based on Optical Multicore Fibers (MCF) or multiple optical single-core fibers with embedded strain sensors and provides a comprehensive analysis of a wide range of aspects, comprising: (1) existing alternative technologies; (2) an overview of optical fiber sensors (3) characteristics and advantages of fiber optic shape sensors; (4) historical achievements; (5) applications; (6) performance and error analysis; and (7) present and future perspectives., This work was carried out within the ITN-FINESSE framework, funded by the European Union's Horizon 2020 Research and Innovation Program under the Marie Sklodowska-Curie Action Grant Agreement N degrees 722509. It was also supported by the Ministry of Economy and Competitiveness of Spain under DIMENSION TEC2017-88029-R.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

On the Thermal Models for Resistive Random Access Memory Circuit Simulation

  • Stavrinides, Stavros G.
  • Suñé, Jordi
  • Chua, Leon O.
  • Roldán, Juan B.
  • González-Cordero, Gerardo
  • Picos, Rodrigo
  • Miranda, Enrique
  • Palumbo, Félix
  • Jiménez-Molinos, Francisco
  • Moreno, Enrique
  • Maldonado, David
  • Baldomá, Santiago B.
  • Moner Al Chawa, Mohamad
  • de Benito, Carol
[eng] Resistive Random Access Memories (RRAMs) are based on resistive switching (RS) operation and exhibit a set of technological features that make them ideal candidates for applications related to non-volatile memories, neuromorphic computing and hardware cryptography. For the full industrial development of these devices different simulation tools and compact models are needed in order to allow computer-aided design, both at the device and circuit levels. Most of the different RRAM models presented so far in the literature deal with temperature effects since the physical mechanisms behind RS are thermally activated; therefore, an exhaustive description of these effects is essential. As far as we know, no revision papers on thermal models have been published yet; and that is why we deal with this issue here. Using the heat equation as the starting point, we describe the details of its numerical solution for a conventional RRAM structure and, later on, present models of different complexity to integrate thermal effects in complete compact models that account for the kinetics of the chemical reactions behind resistive switching and the current calculation. In particular, we have accounted for different conductive filament geometries, operation regimes, filament lateral heat losses, the use of several temperatures to characterize each conductive filament, among other issues. A 3D numerical solution of the heat equation within a complete RRAM simulator was also taken into account. A general memristor model is also formulated accounting for temperature as one of the state variables to describe electron device operation. In addition, to widen the view from different perspectives, we deal with a thermal model contextualized within the quantum point contact formalism. In this manner, the temperature can be accounted for the description of quantum effects in the RRAM charge transport mechanisms. Finally, the thermometry of conducting filaments and the corresponding models considering different dielectric materials are tackled in depth.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

An Improved Pattern Synthesis Iterative Method in Planar Arrays for Obtaining Efficient Footprints with Arbitrary Boundaries

  • Salas Sánchez, Aarón Ángel
  • López Álvarez, Cibrán
  • Rodríguez González, Juan Antonio
  • López Martín, María Elena
  • Ares Pena, Francisco José
In the present paper, an iterative technique devoted to reproducing efficient footprints with arbitrary boundaries for planar arrays is addressed. The methodology here depicted is based on exploiting the nature of the continuous aperture distribution by expressing it as a Fourier series of moderately high orders. In this manner, the resulting illumination boundary is defined by a target three-dimensional flat-topped pattern composed of stretching and shrinking modified circular Taylor patterns and the maximum order of the series to obtain a good reconstruction is determined by means of the iterative process. Examples and comparisons with the previous literature were conducted by analyzing square and rectangular contoured beams as test cases. Additionally, interesting potentials regarding space applications from a geostationary satellite are outlined by means of the EuTELSAT (European Telecommunications Satellite Organization) European coverage case study. In such a way, its numerical approach was analyzed by including subarray architectures and discussing improvements about dynamic range ratio of the excitations without critical power losses within the illumination region
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Exposure to 2.45 GHz Radiation Triggers Changes in HSP-70, Glucocorticoid Receptors and GFAP Biomarkers in Rat Brain

  • Othman, Haifa
  • López Furelos, Alberto
  • Leiro Vidal, José Manuel
  • Ammari, Mohamed
  • Sakly, Mohsen
  • Abdelmelek, Hafedh
  • Salas Sánchez, Aarón Ángel
  • Ares Pena, Francisco José
  • López Martín, María Elena
Brain tissue may be especially sensitive to electromagnetic phenomena provoking signs of neural stress in cerebral activity. Fifty-four adult female Sprague-Dawley rats underwent ELISA and immunohistochemistry testing of four relevant anatomical areas of the cerebrum to measure biomarkers indicating induction of heat shock protein 70 (HSP-70), glucocorticoid receptors (GCR) or glial fibrillary acidic protein (GFAP) after single or repeated exposure to 2.45 GHz radiation in the experimental set-up. Neither radiation regime caused tissue heating, so thermal effects can be ruled out. A progressive decrease in GCR and HSP-70 was observed after acute or repeated irradiation in the somatosensory cortex, hypothalamus and hippocampus. In the limbic cortex; however, values for both biomarkers were significantly higher after repeated exposure to irradiation when compared to control animals. GFAP values in brain tissue after irradiation were not significantly different or were even lower than those of nonirradiated animals in all brain regions studied. Our results suggest that repeated exposure to 2.45 GHz elicited GCR/HSP-70 dysregulation in the brain, triggering a state of stress that could decrease tissue anti-inflammatory action without favoring glial proliferation and make the nervous system more vulnerable
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Validation of Potential Effects on Human Health of in Vivo Experimental Models Studied in Rats Exposed to Sub-Thermal Radiofrequency. Possible Health Risks Due to the Interaction of Electromagnetic Pollution and Environmental Particles

  • Salas Sánchez, Aarón Ángel
  • López Furelos, Alberto
  • Rodríguez González, Juan Antonio
  • Ares Pena, Francisco José
  • López Martín, María Elena
Studies are based on the exposure of Sprague–Dawley rats (250 male and 250 female rats) to electromagnetic fields (EMF) at different frequencies in standing and travelling wave chambers. Values of specific absortion rate (SAR) for all of these experiments were obtained from commercially available FDTD-based simulation software based on numerical phantom animals. An experimental radiation system was developed with a standing-wave cavity which keeps electromagnetic parameters constant while facilitating stress-free exposure of animals to non-thermal radiation. This makes it possible to directly measure the power absorbed by the animal and determine whole-body mean SAR according to weight. All studies using this setup were performed with global system for mobile communication (GSM) radiation at 900 MHz. The simple picrotoxin model made allow to identify morphological signs of neurotoxicity in rat brain tissue. Experiments involving travelling waves were done in a commercial Gigahertz Transverse ElectroMagnetic (GTEM) chamber connected to one or two vector signal generators (to carry single or multiple EMF exposure frequencies). In the diathermy model, rat thyroid and thymus exposed to 2.45 GHz radiation showed visible morphological and immune effects. Cellular stress in the cerebral cortex, the cerebellum or both seems to be more associated with the type of signal than with additive effects of combined frequencies. Finally, some hypothesis related with the future models about the ElectroMagnetic (EM) pollution are established. In an urban environmental that combines the electromagnetic and chemical pollution of environmental particles, cortical excitability, inflammatory response, and cell injury can be modified.
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Feasibility Study on Measuring the Particulate Matter Level in the Atmosphere by Means of Yagi–Uda-Like Antennas

  • Salas Sánchez, Aarón Ángel
  • Rauch, Julian
  • López Martín, María Elena
  • Rodríguez González, Juan Antonio
  • Franceschetti, Giorgio
  • Ares Pena, Francisco José
In this work, the application of a technique for monitoring changes of the dielectric constant of the atmosphere caused by the presence of pollution is discussed. The method is based on changes in the reflection coefficient of the device induced by these dielectric constant variations of the surrounding medium. To that end, several Yagi–Uda-like antenna designs with different size limitations were simulated by using a Method-of-Moments software and optimized by means of a simulated annealing strategy. It has been found that the larger the optimal elements of the array are allowed to be, the higher the sensitivity reached. Thus, in a trade-off between sensitivity and moderate length (regarding flexibility purposes), the most promising solution has been built. This prototype has been experimentally tested in presence of an artificial aerosol made of PAO (polyalphaolefin) oil and black carbon inclusions of a size of 0.2 μm. As a result, potentials for developing a measurement procedure by means of changes in the characteristic parameters of the antenna led by different concentration levels of suspended particles in the surrounding medium are shown. In this manner, a local mapping of polluted levels could be developed in an easy, real-time, and flexible procedure
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Multiple Solutions Starting from Real Shaped Beams in Equispaced Linear Arrays

  • Salas Sánchez, Aarón Ángel
  • López Castro, Camilo
  • Rocca, Paolo
  • Rodríguez González, Juan Antonio
  • López Martín, María Elena
  • Ares Pena, Francisco José
In the present work, the theoretical basis of the multiplicity of solutions obtained from an initial real symmetric distribution is derived. This initial solution is devoted to generating an equivalent pure real shaped-beam pattern for a concrete synthesis scenario. However, these new solutions are not based on real symmetric distributions; hence, not based on the generation of pure real patterns. The bandwidth performances and tolerance to errors provided by the multiple solutions in the array design are analyzed by considering different architectures, also including mutual coupling models and element factor expressions due to accuracy purposes. In addition, a technique to obtain efficient linear arrays by designing resonant structures is addressed. Examples involving both standard linear arrays of half-wavelength cylindrical dipoles and resonant linear arrays generating flat-top beam patterns are reported and discussed. Additionally, an extension to planar arrays performed by means of a generalisation of the Baklanov transformation through collapsed distribution techniques inspired in the well-known method devised by Tseng and Cheng is performed. In such a way, an analysis of the quality of solutions for generating circular and elliptical footprints with controlled both SLL and ripple which are highly interesting in the framework of space vehicle applications
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Extraction of discontinuity sets of rocky slopes using iPhone-12 derived 3DPC and comparison to TLS and SfM datasets

  • Riquelme, Adrián
  • Tomás, Roberto
  • Cano, Miguel
  • Pastor Navarro, José Luis
  • Jordá Bordehore, Luis
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Characterisation of a rock mass requires data from the intact rock along with the discontinuities. Assuming that the discontinuities are planar, its characterisation requires its number and orientation. This leads to the analysis of the normal spacing, the persistence and the roughness, among others. The geometrical analysis of the surface enables the calculation of the parameters to characterise the discontinuities, and the use of digital datasets enhance them. Remote sensing techniques, such as the Terrestrial Laser Scanning (TLS) instruments of Structure from Motion (SfM) technique, provide 3D point clouds that enable the geometrical analysis. The scientific community has been testing both techniques since the 2000s, and companies are introducing their use in their workflows. However, the cost of the TLS instrument could still be a barrier to its use to most scholars. Because of this, the community shows a growing interest in Remotely Piloted Aircraft Systems (RPAS) equipped with digital cameras or in smartphones equipped with high-quality cameras to capture digital datasets of rocky slopes. The SfM workflow processes the captured images, reconstructing the rocky slope through a 3D point cloud and textured meshes. Although previous studies show that the SfM-derived point clouds present less quality than TLS-derived datasets in terms of accuracy, the use of SfM is still of interest because of its cost. In 2020 Apple launched the Iphone-12 device, which is equipped with a LiDAR sensor that is not used to capture the surface coordinates but to enhance the photo's quality. Since then, the community has developed several applications to reconstruct 3D surfaces using this device. This leads to consider this device as an intermediate option between the TLS and SfM to characterise rocky slopes and their discontinuities. In this communication we explore the digitalisation of a rocky slope via TLS instruments, SfM technique and using the Iphone-12 device. It comprises a 26 meter high mechanically excavated rocky slope in Cretaceous marlstones and limestones. To capture the surface, we used three configurations, and we found that to scan ground surface the distance device-surface had to be less than 3 meters. The discontinuities are characterised using the three sources of information using the DSE software. The results show a promising match compared to the TLS or SfM. This evidences that these devices will soon be widely employed for evaluating rocky slopes.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Digital 3D Rocks: A Collaborative Benchmark for Learning Rocks Recognition

  • Riquelme, Adrián
  • Cano, Miguel
  • Tomás, Roberto
  • Jordá Bordehore, Luis
  • Pastor Navarro, José Luis
  • Benavente, David
  • Benavente, David|||/items/93054314-55c1-4e9f-a84d-f461370acc10
  • Cano, Miguel|||/items/38b494d6-7a64-43b5-a4ee-6fd963130f19
  • Pastor Navarro, José Luis|||/items/d54670cf-e108-40a1-9466-1cd07a1e614c
  • Riquelme, Adrián|||/items/03cd5ff0-7df3-4736-81f3-4d94bd19316a
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Naked eye rock recognition is an essential activity for professionals and students of geosciences, architecture and engineering. Through a hand holding rock specimen, it is usually required not only to identify the type of rock but recognize their texture and understand its expected properties mechanical and petrophysical properties. Although a wide choice of books, websites and apps are available in the literature and on the Internet, their contents are two-dimensional (2D) and static. Nowadays, the application of remote sensing techniques such as Light Detection and Ranging (LiDAR) or Structure from Motion (SfM) enable the generation of three-dimensional (3D) interactive models, which are here presented as a novel perspective of learning and practising rocks recognition. Despite limitations of the technique, 3D digital models of rocks permit their virtual visualization and manipulation to reveal parts of the specimens that are hidden in the 2D photograph, as well as details of the rock specimen’s texture such as grain and minerals size, distribution and organization along with the possibility of identifying petrological features, foliation, mineral orientations and others. This provides a novel perspective of learning and practising rocks identification. Herein, a benchmark of digital rocks collected all around the world and generated using SfM technique is presented. The rocks are organised using a straightforward classification system based on the texture jointly with a detailed description to aid the specimen recognition. A behavioural geomechanical classification is then applied. Moreover, a linked datasheet shows the engineering classification, the weathering degree, the guide physical and mechanical properties (general, and specific when available), the engineering uses and others. The information is organised on an open-access website hosted by the University of Alicante (https://web.ua.es/digitalrocks). This initiative also aims to encourage students and professionals to generate their own models and to provide the description to enlarge the repository.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Sensitivity Analysis of Sentinel-1 Backscatter to Oil Palm Plantations at Pluriannual Scale: A Case Study in Gabon, Africa

  • Ballester-Berman, J. David
  • Rastoll-Gimenez, Maria
  • Ballester-Berman, J. David|||/items/a6960cca-2ad9-4d2b-ab77-465bf799fba8
The present paper focuses on a sensitivity analysis of Sentinel-1 backscattering signatures from oil palm canopies cultivated in Gabon, Africa. We employed one Sentinel-1 image per year during the 2015–2021 period creating two separated time series for both the wet and dry seasons. The first images were almost simultaneously acquired to the initial growth stage of oil palm plants. The VH and VV backscattering signatures were analysed in terms of their corresponding statistics for each date and compared to the ones corresponding to tropical forests. The times series for the wet season showed that, in a time interval of 2–3 years after oil palm plantation, the VV/VH ratio in oil palm parcels increases above the one for forests. Backscattering and VV/VH ratio time series for the dry season exhibit similar patterns as for the wet season but with a more stable behaviour. The separability of oil palm and forest classes was also quantitatively addressed by means of the Jeffries–Matusita distance, which seems to point to the C-band VV/VH ratio as a potential candidate for discrimination between oil palms and natural forests, although further analysis must still be carried out. In addition, issues related to the effect of the number of samples in this particular scenario were also analysed. Overall, the outcomes presented here can contribute to the understanding of the radar signatures from this scenario and to potentially improve the accuracy of mapping techniques for this type of ecosystems by using remote sensing. Nevertheless, further research is still to be done as no classification method was performed due to the lack of the required geocoded reference map. In particular, a statistical assessment of the radar signatures should be carried out to statistically characterise the observed trends.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Entering the Era of Earth Observation-Based Landslide Warning Systems: A novel and exciting framework

  • Dai, Keren
  • Li, Zhenhong
  • Xu, Qiang
  • Bürgmann, Roland
  • Milledge, David G.
  • Tomás, Roberto
  • Fan, Xuanmei
  • Zhao, Chaoying
  • Liu, Xiaojie
  • Peng, Jian-bing
  • Zhang, Qin
  • Wang, Zheng
  • Qu, Tengteng
  • He, Chaoyang
  • Li, Deren
  • Liu, Jingnan
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
Landslide early warning remains a grand challenge due to the high human cost of catastrophic landslides globally and the difficulty of identifying a diverse range of landslide triggering factors. There have been only a very limited number of success stories to date. However, recent advances in earth observation (EO) from ground, aircraft and space have dramatically improved our ability to detect and monitor active landslides and a growing body of geotechnical theory suggests that prefailure behavior can provide clues to the location and timing of impending catastrophic failures. In this paper, we use two recent landslides in China as case studies, to demonstrate that (i) satellite radar observations can be used to detect deformation precursors to catastrophic landslide occurrence, and (ii) early warning can be achieved with real-time in-situ observations. A novel and exciting framework is then proposed to employ EO technologies to build an operational landslide early warning system.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Up-Conversion Sensing of 2D Spatially-Modulated Infrared Information-Carrying Beams with Si-Based Cameras

  • Torregrosa, Adrián José
  • Karamehmedović, Emir
  • Maestre, Haroldo
  • Rico Soliveres, María Luisa
  • Capmany, Juan
  • Rico Soliveres, María Luisa|||/items/7d9634e2-c5eb-4571-84ae-bf392f3fba58
Up-conversion sensing based on optical heterodyning of an IR (infrared) image with a local oscillator laser wave in a nonlinear optical sum-frequency mixing (SFM) process is a practical solution to circumvent some limitations of IR image sensors in terms of signal-to-noise ratio, speed, resolution, or cooling needs in some demanding applications. In this way, the spectral content of an IR image can become spectrally shifted to the visible/near infrared (VIS/NWIR) and then detected with silicon focal plane arrayed sensors (Si-FPA), such as CCD/CMOS (charge-coupled and complementary metal-oxide-semiconductor devices). This work is an extension of a previous study where we recently introduced this technique in the context of optical communications, in particular in FSOC (free-space optical communications). Herein, we present an image up-conversion system based on a 1064 nm Nd3+: YVO4 solid-state laser with a KTP (potassium titanyl phosphate) nonlinear crystal located intra-cavity where a laser beam at 1550 nm 2D spatially-modulated with a binary Quick Response (QR) code is mixed, giving an up-converted code image at 631 nm that is detected with an Si-based camera. The underlying technology allows for the extension of other IR spectral allocations, construction of compact receivers at low cost, and provides a natural way for increased protection against eavesdropping.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Analysis and modeling of the combined effects of hydrological factors on a reservoir bank slope in the Three Gorges Reservoir area, China

  • Huang, Da
  • Luo, Shi-lin
  • Zhong, Zhu
  • Gu, Dong-Ming
  • Song, Yi-Xiang
  • Tomás, Roberto
  • Tomás, Roberto|||/items/09b36b99-47d8-4689-b68f-9311f1574d96
More than 5000 landslides have been identified in the Three Gorges Reservoir (TGR) area since the impoundment in 2003, which posed great threats to the residential houses, transportation on the Yangtze, and dam stability. This paper focuses on the evaluation of the coupled influence of rainfall and reservoir water on deformation characteristics and failure evolution of the Outang landslide (in China) based on field investigations, a statistical Pearson cross-correlation coefficient analysis, multi-technique monitoring data, and a numerical model. This instability is a reactivated ancient landslide with a volume of approximately 90 Mm3 located in the Three Gorges Reservoir. The slope behavior is featured with a short period of fast displacement and a relatively long period of semi-constant displacement rates per hydrological year, and displacements velocities quicken gradually upslope. Rainfall and reservoir water level are the main triggering factors of slope movement existing in the upper and the lower parts of the landslide, respectively. Based on the numerical results, the failure evolution of this landslide is a compounded push-retrogression-type failure process involving: a) a first rupture at the toe caused by the reservoir water level that will rapidly mobilize a second and subsequent collapses upwards (retrogression type); and b) the rock mass at the upper part will be pushed out and failed downslope (push type) due to precipitation. These results provide a comprehensive analysis of the Outang landslide, which is critical for its management, as well as for disaster prevention and mitigation of analogous reservoir-induced landslides.