Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Tunability Properties and Compact Modeling of HfO2-Based Complementary Resistive Switches Using a Three-Terminal Subcircuit

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Poblador, S.|||0000-0003-4044-6990
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
Complementary resistive switching (CRS) arises when two bipolar-mode memristive devices are antiserially connected, forming a single functional structure. The combined effect of both memristors leads to the appearance of high (HRS) and low (LRS) resistance windows in the current-voltage (I-V) characteristic that finds application in fields such as neuromorphic computing and logic circuits. In this work, the electric behavior of HfO2-based CRS devices intentionally fabricated with a common central electrode is investigated both from experimental and modeling viewpoints. Experiments reveal that the maximum voltage applied to the structure allows tuning the amplitude of the resistance window following a self-balance dynamics. The origin of the abrupt (digital) and gradual (analog) transitions between the HRS and LRS states is elucidated through the inclusion of the snapback and snapforward effects in the switching dynamics. TheI-Vcharacteristics of the CRS devices are compact modeled with two opposite-biased memdiodes and simulated in LTSpice using an equivalent three-terminal subcircuit. It is shown that the proposed model is able to reproduce with a high degree of accuracy not only the observed CRS behavior for HfO2 but also the main features exhibited by devices with a wide variety of oxide/electrode materials.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

On the Thermal Models for Resistive Random Access Memory Circuit Simulation

  • Stavrinides, Stavros G.
  • Suñé, Jordi
  • Chua, Leon O.
  • Roldán, Juan B.
  • González-Cordero, Gerardo
  • Picos, Rodrigo
  • Miranda, Enrique
  • Palumbo, Félix
  • Jiménez-Molinos, Francisco
  • Moreno, Enrique
  • Maldonado, David
  • Baldomá, Santiago B.
  • Moner Al Chawa, Mohamad
  • de Benito, Carol
[eng] Resistive Random Access Memories (RRAMs) are based on resistive switching (RS) operation and exhibit a set of technological features that make them ideal candidates for applications related to non-volatile memories, neuromorphic computing and hardware cryptography. For the full industrial development of these devices different simulation tools and compact models are needed in order to allow computer-aided design, both at the device and circuit levels. Most of the different RRAM models presented so far in the literature deal with temperature effects since the physical mechanisms behind RS are thermally activated; therefore, an exhaustive description of these effects is essential. As far as we know, no revision papers on thermal models have been published yet; and that is why we deal with this issue here. Using the heat equation as the starting point, we describe the details of its numerical solution for a conventional RRAM structure and, later on, present models of different complexity to integrate thermal effects in complete compact models that account for the kinetics of the chemical reactions behind resistive switching and the current calculation. In particular, we have accounted for different conductive filament geometries, operation regimes, filament lateral heat losses, the use of several temperatures to characterize each conductive filament, among other issues. A 3D numerical solution of the heat equation within a complete RRAM simulator was also taken into account. A general memristor model is also formulated accounting for temperature as one of the state variables to describe electron device operation. In addition, to widen the view from different perspectives, we deal with a thermal model contextualized within the quantum point contact formalism. In this manner, the temperature can be accounted for the description of quantum effects in the RRAM charge transport mechanisms. Finally, the thermometry of conducting filaments and the corresponding models considering different dielectric materials are tackled in depth.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Effect of Resistive Switching Cycling on the Physical Characteristics of Ni/HfO2/n+-Si RRAM Devices

  • Muñoz-Gorriz, J.
  • Acero Leal, María Cruz
  • González, M. B.
  • Campabadal, Francesca
  • Miranda, E.
Trabajo presentado en la 1st International Conference on Microelectronic Devices and Technologies, celebrado en Barcelona (España), del 20 al 22 de junio de 2018, In this work, the unipolar resistive switching characteristics of Ni/HfO2/n+-Si RRAM devices are investigated. Inspection by scanning electron microscope after Ni removal revealed small hillocks and defects in the active area caused by the electrical stress during cycling. In addition, for severely damaged devices the set voltage is found to exceed the forming voltage. This behavior is correlated to the high current levels reached in the low resistance state which originate a remarkable physical degradation of the top metal electrode. These results point out the importance of considering current excess in the reset phase., This work has been partially funded by the Spanish MINECO and FEDER though projects TEC2014- 52152-C3-1-R, TEC2017-84321-C4-4-R, and TEC2014-54906-JIN. The authors acknowledge the reviewer’s suggestions to improve the quality of this paper.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Physical characterization of filamentary structures in TiN/Ti/HfO2/W memristor devices

  • Poblador, Samuel
  • Maestro, Marcos
  • Acero Leal, María Cruz
  • González, M. B.
  • Campabadal, Francesca
Resumen del trabajo presentado en la 12th Spanish Conference on Electron Devices (CDE 2018), celebrada en Salamanca (España), del 14 al 16 de noviembre de 2018, In this work, the physical degradation of Ni/HfO2/n+-Si RRAM devices occurring during negative unipolar resistive switching cycling is analyzed. In most of the cases, a localized defect is generated in the dielectric layer after the forming process. However, due to the electrical stress, in some devices a complete degradation is observed comprising a crater-like structure, being this behavior correlated to a sudden increase of the current in the low resistance state., This work has been partially funded by the Spanish Ministry of Science, Innovation and Universities and the FEDER program through projects TEC2017-84321-C4-1-R, TEC2017- 84321-C4-4-R, and TEC2014-54906-JIN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

One-way Sensitivity Analysis of the Quasi-static Memdiode Model for RRAM Devices

  • Salvador, E.
  • González, M. B.
  • Campabadal, Francesca
  • Martín-Martínez, J.
  • Rodríguez, R.
  • Miranda, E.
In this work, we assess the impact that changes in the parameters of the quasi-static memdiode model (QMM) for RRAM devices will have on the simulated conduction characteristics. Sensitivity analysis is recognized as the most important technique for identifying which parameters are key drivers of the model's results. The model's reference parameters are extracted first from a typical (median) experimental I-V curve of an electroformed Hf02-based metal-insulator-metal (MIM) structure. Then one parameter is changed at a time (so-called univariate or one-way analysis) in the LTSpice script and the variation of some selected observables recorded. Special attention is paid to the voltage span-induced sensitivity effect., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Neural network based analysis of random telegraph noise in resistive random access memories

  • González-Cordero, G.
  • González, Mireia Bargalló
  • Morell, A.
  • Jiménez-Molinos, F.
  • Campabadal, Francesca
  • Roldán, J. B.
The characterization of random telegraph noise (RTN) signals in resistive random access memories (RRAM) is a challenge. The inherent stochastic operation of these devices, much different to what is seen in other electron devices such as MOSFETs, diodes, etc, makes this issue more complicated from the mathematical viewpoint. Nevertheless, the accurate modeling of these type of signals is essential for their use in digital and analog applications. RTN signals are revealed to be linked to the emission and capture of electrons by traps close to the conductive filament that can influence resistive switching operation in RRAMs. RTN features depend on the number of active traps, on the interaction between these traps at different times, on the occurrence of anomalous effects, etc Using a new representation technique, the locally weighted time lag plot (LWTLP), a highly efficient method in terms of computation, data from current-time (I-t) traces can be represented with a pattern that allows the analysis of important RTN signal features. In addition, self-organizing maps, a neural network devoted to clustering, can be employed to perform an automatic classification of the RTN traces that have similar LWTLP patterns. This pattern analysis allows a better understanding of RTN signals and the physics underlying them. The new technique presented can be performed in a reasonable computing time and it is particularly adequate for long (I-t) traces. We introduce here this technique and the most important results that can be drawn when applied to long RTN traces experimentally obtained in RRAMs., The authors thank the support of the Spanish Ministry of Science and Universities and the FEDER program through projects TEC2017-84321-C4-1-R, TEC2017-84321-C4-3-R, TEC2017-84321-C4-4-R. This work has made use of the Spanish ICTS Network MICRONANOFABS., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of the Clustering Model to Time-Correlated Oxide Breakdown Events in Multilevel Antifuse Memory Cells

  • Gorriz, Jordi Munoz
  • Gonzalez, Mireia Bargallo
  • Campabadal, Francesca
  • Sune, Jordi
  • Miranda, Enrique A.
Time statistics for successive breakdown (BD) events in Al2O3/HfO2-based nanolaminates aimed to the development of multilevel one-time programmable (OTP) memory cells is investigated. The clustering model is shown to account for the departure of the experimental data from the standard Weibull model attributed to the initial leakage current dispersion. An equivalent electrical circuit model is used to represent the stepwise current increase triggered by the appearance of multiple BD sites. Correlation effects in the order statistics are ascribed to a reduction of the effective stress voltage caused by the presence of a series resistance. It is shown that the E -model acceleration law for dielectric BD is consistent with the data obtained from our antifuse cells., Manuscript received October 2, 2020; revised October 21, 2020; accepted October 22, 2020. Date of publication October 26, 2020; date of current version November 24, 2020. This work was supported in part by the Spanish Ministry of Science, Innovation, and Universities and in part by the Fondo Europeo de Desarrolllo Regional (FEDER) Program under Project TEC2017-84321-C4-1-R and Project TEC2017-84321-C4-4-R. The review of this letter was arranged by Editor U. Ganguly. (Corresponding author: Jordi Muñoz Gorriz.) Jordi Muñoz Gorriz, Jordi Suñé, and Enrique A. Miranda are with the Departament d’Enginyeria Electrònica, Universitat Autònoma de Barcelona, 08193 Cerdanyola del Vallès, Spain (e-mail: jordi.munoz.gorriz@uab.cat)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A New Perspective towards the Understanding of the Frequency-Dependent Behavior of Memristive Devices

  • Maestro-Izquierdo, Marcos
  • Gonzalez, Mireia Bargalló
  • Campabadal, Francesca
  • Sune, Jordi
  • Miranda, Enrique A.
As theoretically predicted by Prof. Chua, the input signal frequency has a major impact on the electrical behavior of memristors. According with one of the so-called fingerprints of such devices, the resistive window, i.e. the difference between the low and high resistance states, shrinks as the frequency increases. Physically, this effect stems from the incapability of ions/vacancies to follow the external electrical stimulus. In terms of the electrical behavior, the collapse of the resistive window can be ascribed to the shift of the set and reset voltages toward higher values. In addition, for a fixed frequency, the resistive window increases with the signal amplitude. In this letter, we show that both phenomena, decrease and increase of the resistive window, can be consistently explained after considering the snapback effect and a balance model equation for the memory state of the device., Manuscript received February 2, 2021; revised February 23, 2021; accepted February 26, 2021. Date of publication March 2, 2021; date of current version March 24, 2021. This work was supported in part by the Spanish Ministry of Science and Innovation and in part by the FEDER Program under Grant TEC2017-84321-C4-1-R and Grant TEC2017-84321-C4-4-R. The review of this letter was arranged by Editor H. Wu. (Corresponding author: M. Maestro-Izquierdo.) M. Maestro-Izquierdo, J. Suñé, and E. Miranda are with the Depar-tament d’Enginyeria Electrònica, Universitat Autònoma de Barcelona, 08193 Cerdanyola del Vallès, Spain (e-mail: marcos.maestro@uab.cat)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Simple method for monitoring the switching activity in memristive cross-point arrays with line resistance effects

  • Miranda, E.|||0000-0003-0470-5318
  • Morell, Antoni|||0000-0003-2249-8594
  • Muñoz Gorriz, Jordi|||0000-0003-4101-5009
  • Suñé, Jordi|||0000-0003-0108-4907
A simple method for monitoring the switching activity (forming, set, reset events and stuck-at-0/1 faults) in memristive cross-point arrays with line resistance effects is proposed. The method consists in correlating incremental current changes in a four-terminal configuration with the location of the switching cell within the array. The potential drops in the interconnection wires as well as the nonlinearity of the switching elements are considered within this approach. The problem is solved by iterating the Kirchhoff's current law for the coupled word and bit lines with appropriate boundary conditions. The main experimental advantage of the proposed method is that only four SMUs (source-measurement unit) are needed to identify the switching cell. In this way, our method could contribute to foster the system-level reliability analysis of cross-point arrays since additional circuitry for the individual addressing of the switching device is not required.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Characterization of HfO2-based devices with indication of second order memristor effects

  • Rodríguez Fernández, Alberto|||0000-0003-4755-4169
  • Cagli, Carlo|||0000-0002-9978-7127
  • Perniola, Luca
  • Miranda, E.|||0000-0003-0470-5318
  • Suñé, Jordi|||0000-0003-0108-4907
Resistive switching is investigated in TiN/Ti/HfO (10 nm)/TiN devices in series with a NMOS transistor as selector in a 1T1R configuration. A complete electrical characterization of the devices is carried out using DC voltage loops, constant-voltage stressed and pulses with varying voltage amplitude and time width. Good control of the ON resistance is achieved by applying different transistor gate voltages and multiple OFF states are controllably reached by varying the maximum reset voltage. The on/off resistance ratio is successfully controlled by changing the pulse amplitude and time duration. However, significant memory effects are reported, showing that the switching of a device depends on its switching history. Exploring the on/off ratio for different set and reset voltage amplitudes in otherwise identical set/reset pulse experiments is shown to depend on the order of application of the different stress conditions so that the on/off resistance map in the V /V space is not unique. We interpret these results as an evidence of second-order memristive effects.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Switching Voltage and Time Statistics of Filamentary Conductive Paths in HfO2-Based ReRAM Devices

  • Rodríguez Fernández, Alberto|||0000-0003-4755-4169
  • Cagli, Carlo|||0000-0002-9978-7127
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
Switching voltage and time statistics of HfO2-based one transistor-one resistor structures are investigated with the aim of clarifying the underlying physical mechanism that governs the formation and rupture of filamentary paths in the insulating layer. From the oxide reliability viewpoint, constant and ramped voltage stress experiments provide strong support to the so-called E-model, which is shown to be in line with current theories relating the reversibility of the conduction states in resistive random access memory devices to ionic drift and ultimately to Kramers' escape rate theory. It is shown how the switching statistics can be used to estimate the width and formation energy of the insulating gap along the filament as well as its temperature.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A new method for estimating the conductive filament temperature in OxRAM devices based on escape rate theory

  • Rodríguez Fernández, Alberto|||0000-0003-4755-4169
  • Muñoz Gorriz, Jordi|||0000-0003-4101-5009
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
Because of the atomic nature of the system under study, an estimation of the temperature of the conductive filament (CF) in OxRAM devices as a function of the applied bias can only be obtained by means of indirect methods, usually electrothermal simulations. In this paper, a heuristic approach that combines time-dependent dielectric breakdown (TDDB) statistics for the electroformed device with field and temperature-assisted ionic transport within the framework of escape rate theory is presented. Extended expressions for the time-to-failure acceleration law (E-model) and for the Kramers' rate compatible both with the standard models at moderate/high biases and with the principle of detailed balance at equilibrium are proposed. An approximate expression for the CF temperature is reported. For the investigated stress voltage range (0.30 V-0.65 V), the estimated CF temperature at the SET condition is found to be in the range 350 K-600 K.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

LSTM-Based Wastewater Treatment Plants Operation Strategies for Effluent Quality Improvement

  • Pisa, Ivan|||0000-0003-3931-9257
  • Santín López, Ignacio|||0000-0002-4312-1035
  • Morell, Antoni|||0000-0003-2249-8594
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Vilanova, Ramon|||0000-0002-8035-5199
Wastewater Treatment Plants (WWTPs) are facilities devoted to managing and reducing the pollutant concentrations present in the urban residual waters. Some of them consist in nitrogen and phosphorus derived products which are harmful for the environment. Consequently, certain constraints are applied to pollutant concentrations in order to make sure that treated waters comply with the established regulations. In that sense, efforts have been applied to the development of control strategies that help in the pollutant reduction tasks. Furthermore, the appearance of Artificial Neural Networks (ANNs) has encouraged the adoption of predictive control strategies. In such a fashion, this work is mainly focused on the adoption and development of them to actuate over the pollutant concentrations only when predictions of effluents determine that violations will be produced. In that manner, the overall WWTP's operational costs can be reduced. Predictions are generated by means of an ANN-based Soft-Sensor which adopts Long-Short Term Memory cells to predict effluent pollutant levels. These are the ammonium (S-{NH,e}) and the total nitrogen (S-{Ntot,e}) which are predicted considering influent parameters such as the ammonium concentration at the entrance of the WWTP reactor tanks (S-{NH,po}), the reactors' input flow rate (Q-{po}), the WWTP recirculation rate (Q-{a}) and the environmental temperature (T-{as}). Moreover, this work presents a new multi-objective control scenario which consists in a unique control structure performing the reduction of S-{NH,e} and S-{Ntot,e} concentrations simultaneously. Performance of this new control approach is contrasted with other strategies to determine the improvement provided by the ANN-based Soft-Sensor as well as by the fact of being controlling two pollutants at the same time. Results show that some brief and small violations are still produced. Nevertheless, an improvement in the WWTPs performance w.r.t.The most common control strategies around 96.58% and 98.31% is achieved for S-{NH,e} and S-{Ntot,e}, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Analysis and simulation of the multiple resistive switching modes occurring in HfO x -based resistive random access memories using memdiodes

  • Petzold, Stefan|||0000-0002-4994-9781
  • Miranda, E.|||0000-0003-0470-5318
  • Sharath, S. U.|||0000-0002-8644-1303
  • Muñoz Gorriz, Jordi|||0000-0003-4101-5009
  • Vogel, Tobias|||0000-0003-0720-0681
  • Piros, Eszter|||0000-0001-8714-9059
  • Kaiser, Nico|||0000-0002-5644-890X
  • Eilhardt, Robert
  • Zintler, Alexander|||0000-0002-2272-3184
  • Molina-Luna, Leopoldo|||0000-0002-9412-8093
  • Suñé, Jordi|||0000-0003-0108-4907
  • Alff, Lambert|||0000-0001-8185-4275
In this work, analysis and simulation of all experimentally observed switching modes in hafnium oxide based resistive random access memories are carried out using a simplified electrical conduction model. To achieve switching mode variation, two metal-insulator-metal cells with identical stack combination, but varying oxygen stoichiometry of the hafnia layer, namely, stoichiometric vs highly deficient, are considered. To access the individual switching modes, the devices were subjected to a variety of cycling conditions comprising different voltage and current ranges. For modeling the device behavior, a single or two antiserially connected memdiodes (diode with memory) were utilized. In this way, successful compact simulation of unipolar, bipolar, threshold, and complementary resistive switching modes is accomplished confirming the coexistence of two switching mechanisms of opposite polarity as the basis for all observable switching phenomena in this material. We show that only calibration of the outer current-voltage loops with the memdiode model is necessary for predicting the device behavior in the defined region revealing additional information on the switching process. The correspondence of each memdiode device with the conduction characteristics of the individual top and bottom metal-oxide contacts allows one to assess the role played by each interface in the switching process separately. This identification paves the path for a future improvement of the device performance and functionality by means of appropriate interface engineering.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Denoising Autoencoders and LSTM-Based Artificial Neural Networks Data Processing for Its Application to Internal Model Control in Industrial Environments-The Wastewater Treatment Plant Control Case

  • Pisa, Ivan|||0000-0003-3931-9257
  • Morell, Antoni|||0000-0003-2249-8594
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Vilanova, Ramon|||0000-0002-8035-5199
The evolution of industry towards the Industry 4.0 paradigm has become a reality where different data-driven methods are adopted to support industrial processes. One of them corresponds to Artificial Neural Networks (ANNs), which are able to model highly complex and non-linear processes. This motivates their adoption as part of new data-driven based control strategies. The ANN-based Internal Model Controller (ANN-based IMC) is an example which takes advantage of the ANNs characteristics by modelling the direct and inverse relationships of the process under control with them. This approach has been implemented in Wastewater Treatment Plants (WWTP), where results show a significant improvement on control performance metrics with respect to (w.r.t.) the WWTP default control strategy. However, this structure is very sensible to non-desired effects in the measurements-when a real scenario showing noise-corrupted data is considered, the control performance drops. To solve this, a new ANN-based IMC approach is designed with a two-fold objective, improve the control performance and denoise the noise-corrupted measurements to reduce the performance degradation. Results show that the proposed structure improves the control metrics, (the Integrated Absolute Error (IAE) and the Integrated Squared Error (ISE)), around a 21.25% and a 54.64%, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Minimization of the Line Resistance Impact on Memdiode-Based Simulations of Multilayer Perceptron Arrays Applied to Pattern Recognition

  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Gomez, Nicolás M.
  • Pazos, Sebastián Matías|||0000-0002-7354-4530
  • Palumbo, Félix|||0000-0002-7749-5035
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
In this paper, we extend the application of the Quasi-Static Memdiode model to the realistic SPICE simulation of memristor-based single (SLPs) and multilayer perceptrons (MLPs) intended for large dataset pattern recognition. By considering ex-situ training and the classification of the hand-written characters of the MNIST database, we evaluate the degradation of the inference accuracy due to the interconnection resistances for MLPs involving up to three hidden neural layers. Two approaches to reduce the impact of the line resistance are considered and implemented in our simulations, they are the inclusion of an iterative calibration algorithm and the partitioning of the synaptic layers into smaller blocks. The obtained results indicate that MLPs are more sensitive to the line resistance effect than SLPs and that partitioning is the most effective way to minimize the impact of high line resistance values.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Industrial Control under Non-Ideal Measurements, Data-Based Signal Processing as an Alternative to Controller Retuning

  • Pisa, Ivan|||0000-0003-3931-9257
  • Morell, Antoni|||0000-0003-2249-8594
  • Vilanova, Ramon|||0000-0002-8035-5199
  • Lopez Vicario, Jose|||0000-0002-3574-4697
Industrial environments are characterised by the non-lineal and highly complex processes they perform. Different control strategies are considered to assure that these processes are correctly performed. Nevertheless, these strategies are sensible to noise-corrupted and delayed measurements. For that reason, denoising techniques and delay correction methodologies should be considered but, most of these techniques require a complex design and optimisation process as a function of the scenario where they are applied. To alleviate this, a complete data-based approach devoted to denoising and correcting the delay of measurements is proposed here with a two-fold objective: simplify the solution design process and achieve its decoupling from the considered control strategy as well as from the scenario. Here it corresponds to a Wastewater Treatment Plant (WWTP). However, the proposed solution can be adopted at any industrial environment since neither an optimization nor a design focused on the scenario is required, only pairs of input and output data. Results show that a minimum Root Mean Squared Error (RMSE) improvement of a 63.87% is achieved when the new proposed data-based denoising approach is considered. In addition, the whole system performance show that similar and even better results are obtained when compared to scenario-optimised methodologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A simple, robust, and accurate compact model for a wide variety of complementary resistive switching devices

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
Complementary Resistive Switching (CRS) using memristive devices has been intensively investigated in the last decade. The objective of CRS is to generate low and high resistance windows in the I-V characteristic of the selector device with the aim of reducing the sneak-path conduction problem in crossbar arrays. Though a wide variety of compact models for CRS have been proposed, the one presented here stands out for its simplicity, robustness, and accuracy. The flexibility of the memdiode model is demonstrated through a series of fitting exercises using experimental data found in the literature. The model script for the LTSpice XVII simulator is also provided.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

SPICE modeling of cycle-to-cycle variability in RRAM devices

  • Salvador Aguilera, Emili|||0000-0002-1613-6784
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Martin-Martinez, J.|||0000-0001-5938-5898
  • Rodriguez, R.|||0000-0002-4565-6703
  • Miranda, E.|||0000-0003-0470-5318
In this work, we investigated how to include uncorrelated cycle-to-cycle (C2C) variability in the LTSpice quasi-static memdiode model for RRAM devices. Variability in the I-V curves is first addressed through an in-depth study of the experimental data using the fitdistrplus package for the R language. This provides a first approximation to the identification of the most suitable model parameter distributions. Next, the selected candidate distributions are incorporated into the model script and used for carrying out Monte Carlo simulations. Finally, the experimental and simulated observables (set and reset currents, transition voltages, etc.) are statistically compared and the model estimands recalculated if it is necessary. Here, we put special emphasis on describing the main difficulties behind this seemingly simple procedure.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Transfer learning in wastewater treatment plant control design, from conventional to long short-term memory-based controllers

  • Pisa, Ivan|||0000-0003-3931-9257
  • Morell, Antoni|||0000-0003-2249-8594
  • Vilanova, Ramon|||0000-0002-8035-5199
  • Lopez Vicario, Jose|||0000-0002-3574-4697
In the last decade, industrial environments have been experiencing a change in their control processes. It is more frequent that control strategies adopt Artificial Neural Networks (ANNs) to support control operations, or even as the main control structure. Thus, control structures can be directly obtained from input and output measurements without requiring a huge knowledge of the processes under control. However, ANNs have to be designed, implemented, and trained, which can become complex and time-demanding processes. This can be alleviated by means of Transfer Learning (TL) methodologies, where the knowledge obtained from a unique ANN is transferred to the remaining nets reducing the ANN design time. From the control viewpoint, the first ANN can be easily obtained and then transferred to the remaining control loops. In this manuscript, the application of TL methodologies to design and implement the control loops of a Wastewater Treatment Plant (WWTP) is analysed. Results show that the adoption of this TL-based methodology allows the development of new control loops without requiring a huge knowledge of the processes under control. Besides, a wide improvement in terms of the control performance with respect to conventional control structures is also obtained. For instance, results have shown that less oscillations in the tracking of desired set-points are produced by achieving improvements in the Integrated Absolute Error and Integrated Square Error which go from 40.17% to 94.29% and from 34.27% to 99.71%, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Assessment and improvement of the pattern recognition performance of memdiode-based cross-point arrays with randomly distributed stuck-at-faults

  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Pazos, Sebastián M.
  • Palumbo, Félix|||0000-0002-7749-5035
  • Morell, Antoni|||0000-0003-2249-8594
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
In this work, the effect of randomly distributed stuck-at faults (SAFs) in memristive crosspoint array (CPA)-based single and multi-layer perceptrons (SLPs and MLPs, respectively) intended for pattern recognition tasks is investigated by means of realistic SPICE simulations. The quasi-static memdiode model (QMM) is considered here for the modelling of the synaptic weights implemented with memristors. Following the standard memristive approach, the QMM comprises two coupled equations, one for the electron transport based on the double-diode equation with a single series resistance and a second equation for the internal memory state of the device based on the so-called logistic hysteron. By modifying the state parameter in the current-voltage characteristic, SAFs of different severeness are simulated and the final outcome is analysed. Supervised ex-situ training and two well-known image datasets involving hand-written digits and human faces are employed to assess the inference accuracy of the SLP as a function of the faulty device ratio. The roles played by the memristor's electrical parameters, line resistance, mapping strategy, image pixelation, and fault type (stuck-at-ON or stuck-at-OFF) on the CPA performance are statistically analysed following a Monte-Carlo approach. Three different re-mapping schemes to help mitigate the effect of the SAFs in the SLP inference phase are thoroughly investigated.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

On the Thermal Models for Resistive Random Access Memory Circuit Simulation

  • Roldán, Juan B.|||0000-0003-1662-6457
  • González-Cordero, Gerardo|||0000-0002-5627-9827
  • Picos, Rodrigo|||0000-0002-9167-6422
  • Miranda, E.|||0000-0003-0470-5318
  • Palumbo, Félix|||0000-0002-7749-5035
  • Jiménez-Molinos, Francisco|||0000-0002-8866-7568
  • Moreno Pérez, Enrique|||0000-0002-5304-1311
  • Maldonado, David|||0000-0002-3475-9440
  • Baldomá, Santiago B.|||0000-0001-9007-019X
  • Moner Al Chawa, Mohamad|||0000-0001-8886-4708
  • de Benito, Carol
  • Stavrinides, Stavros G.|||0000-0001-8484-1402
  • Suñé, Jordi|||0000-0003-0108-4907
  • Chua, Leon O.
Resistive Random Access Memories (RRAMs) are based on resistive switching (RS) operation and exhibit a set of technological features that make them ideal candidates for applications related to non-volatile memories, neuromorphic computing and hardware cryptography. For the full industrial development of these devices different simulation tools and compact models are needed in order to allow computer-aided design, both at the device and circuit levels. Most of the different RRAM models presented so far in the literature deal with temperature effects since the physical mechanisms behind RS are thermally activated; therefore, an exhaustive description of these effects is essential. As far as we know, no revision papers on thermal models have been published yet; and that is why we deal with this issue here. Using the heat equation as the starting point, we describe the details of its numerical solution for a conventional RRAM structure and, later on, present models of different complexity to integrate thermal effects in complete compact models that account for the kinetics of the chemical reactions behind resistive switching and the current calculation. In particular, we have accounted for different conductive filament geometries, operation regimes, filament lateral heat losses, the use of several temperatures to characterize each conductive filament, among other issues. A 3D numerical solution of the heat equation within a complete RRAM simulator was also taken into account. A general memristor model is also formulated accounting for temperature as one of the state variables to describe electron device operation. In addition, to widen the view from different perspectives, we deal with a thermal model contextualized within the quantum point contact formalism. In this manner, the temperature can be accounted for the description of quantum effects in the RRAM charge transport mechanisms. Finally, the thermometry of conducting filaments and the corresponding models considering different dielectric materials are tackled in depth.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Transfer Learning Improving Predictive Mortality Models for Patients in End-Stage Renal Disease

  • Macias Toro, Edwar Hernando|||0000-0001-5568-9237
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Serrano, Javier|||0000-0003-1235-2145
  • Ibeas, Jose|||0000-0002-1292-7271
  • Morell, Antoni|||0000-0003-2249-8594
Deep learning is becoming a fundamental piece in the paradigm shift from evidence-based to data-based medicine. However, its learning capacity is rarely exploited when working with small data sets. Through transfer learning (TL), information from a source domain is transferred to a target one to enhance a learning task in such domain. The proposed TL mechanisms are based on sample and feature space augmentation. Thus, deep autoencoders extract complex representations for the data in the TL approach. Their latent representations, the so-called codes, are handled to transfer information among domains. The transfer of samples is carried out by computing a latent space mapping matrix that links codes from both domains for later reconstruction. The feature space augmentation is based on the computation of the average of the most similar codes from one domain. Such an average augments the features in a target domain. The proposed framework is evaluated in the prediction of mortality in patients in end-stage renal disease, transferring information related to the mortality of patients with acute kidney injury from the massive database MIMIC-III. Compared to other TL mechanisms, the proposed approach improves 6-11% in previous mortality predictive models. The integration of TL approaches into learning tasks in pathologies with data volume issues could encourage the use of data-based medicine in a clinical setting.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Ternary Neural Networks Based on on/off Memristors, set-Up and Training

  • Morell, Antoni|||0000-0003-2249-8594
  • Diaz Machado, Elvis|||0000-0002-6583-8547
  • Miranda, E.|||0000-0003-0470-5318
  • Boquet, Guillem|||0000-0002-8683-0421
  • Lopez Vicario, Jose|||0000-0002-3574-4697
Neuromorphic systems based on hardware neural networks (HNNs) are expected to be an energy and time-efficient computing architecture for solving complex tasks. In this paper, we consider the implementation of deep neural networks (DNNs) using crossbar arrays of memristors. More specifically, we considered the case where such devices can be configured in just two states: the low-resistance state (LRS) and the high-resistance state (HRS). HNNs suffer from several non-idealities that need to be solved when mapping our software-based models. A clear example in memristor-based neural networks is conductance variability, which is inherent to resistive switching devices, so achieving good performance in an HNN largely depends on the development of reliable weight storage or, alternatively, mitigation techniques against weight uncertainty. In this manuscript, we provide guidelines for a system-level designer where we take into account several issues related to the set-up of the HNN, such as what the appropriate conductance value in the LRS is or the adaptive conversion of current outputs at one stage to input voltages for the next stage. A second contribution is the training of the system, which is performed via offline learning, and considering the hardware imperfections, which in this case are conductance fluctuations. Finally, the resulting inference system is tested in two well-known databases from MNIST, showing that is competitive in terms of classification performance against the software-based counterpart. Additional advice and insights on system tuning and expected performance are given throughout the paper.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

SPICE model for complementary resistive switching devices based on anti-serially connected quasi-static memdiodes

  • Saludes Tapia, Maria Mercedes|||0000-0002-7091-4866
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
This paper reports the use of the Quasi-static Memdiode Model (QMM) for simulating Complementary Resistive Switching (CRS) devices. CRS arises from the anti-serial connection of two memristors and it is used for generating low and high-resistance regions in the I-V characteristic with the aim of mitigating the sneak-path conduction problem in crossbar arrays. Here, the use of the QMM for CRS in the form of a six terminal subcircuit is explored. While two terminals of the subcircuit correspond to the conventional input and output pins of the CRS structure, the rest provide information about the voltage at the central node, the low-voltage conductance of each device, and the low-voltage conductance of the whole structure. Special attention is paid to the simulation of the so-called table with legs hysteresis loop (resistance at fixed bias vs. write voltage), which is often invoked in connection with devices that exhibit switching activity at the two interfaces of a single dielectric layer. Because of the internal potential drop distribution, the switching process takes place alternately at one side of the structure or the other giving rise to a pseudo-CRS behavior. The flexibility of the proposed approach is demonstrated through a series of fitting exercises that involve experimental data reported in the literature. The model script for the SPICE simulator is also provided.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Multiple imputation using the average code from autoencoders

  • Macias Toro, Edwar Hernando|||0000-0001-5568-9237
  • Serrano, Javier|||0000-0003-1235-2145
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Morell, Antoni|||0000-0003-2249-8594
Background: Missing information is a constant issue in the clinical setting. The presence of missing values (MV) is triggered by the wrong acquisition of data or sudden events in the patient's health condition. Imputation arises to replace the non-existent information with the twofold purpose of benefiting from existing information and reducing bias in clinical settings. Mechanisms based on deep learning and multiple imputation (MI) are leading alternatives to impute MVs because of their capacity to extract complex relationships and the consideration of uncertainty that MI adds. Objective: This study aims to improve the reconstruction of missing information through a novel imputation alternative that integrates a MI paradigm into deep learning models. Methods: The proposed method integrates the MI paradigm into the latent representations of an autoencoder, the so-called codes. The average code is then computed, boosting a better latent representation of data. Finally, the average code is decoded to reconstruct MVs. Results: The proposed method is tested in 6 datasets with different patters of MVs. It is compared with solutions based on autoencoders and generative adversarial networks. For the random appearance of MVs, the proposed method outperforms 97% of the scenarios with a reconstruction gain that ranges 1.04-1.45. For the other MVs mechanisms, the proposed method improves the reconstruction in at least 69% of the experiments, with a gain of 1.13-1.91. Conclusion: The findings of the proposed approach showed that the reconstructive capacity of the average code outperforms in most of the scenarios its competitors and close to the best solution in the rest of the scenarios. The integration of the MI paradigm into latent representations of data and the computation of average codes allow a more robust representation of the data and enables the enhancement of current state-of-the-art methods for high MVs rates.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mortality prediction enhancement in end-stage renal disease, A machine learning approach

  • Macias Toro, Edwar Hernando|||0000-0001-5568-9237
  • Morell, Antoni|||0000-0003-2249-8594
  • Serrano, Javier|||0000-0003-1235-2145
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Ibeas, Jose|||0000-0002-1292-7271
In this work, we propose to combine massive variables collected during the evolution of patients in end-stage renal disease (ESRD), along with machine learning techniques to improve mortality prediction in ESRD. This work was carried out with a retrospective cohort of 261 patients, their evolution from diagnoses, laboratory tests, and variables recorded during haemodialysis sessions was combined. Random forest (RF) was used to explore the inference of the variables and define a base performance for long short-term memory (LSTM) recurrent neural networks. Then, LSTMs were trained with several groups of variables chosen by expert staff, the ones found by RF and all the available ones. The best performance was obtained using all the variables, but the ones found by RF had better predictive capacity than those chosen with expert knowledge. Integrating the three sources of information supposes an improvement in more than 4% in the area under the receiver operating characteristic curve. The approach is sufficientlyrobust to predict mortality at different time ranges. The massive integration of variables from patients in ESRD, together with the use of LSMTs, supposes an exceptional improvement in the predictive models of mortality. In conclusion, the machine learning approach can lead to a change in the paradigm in the analysis of predictive factors in mortality in ESRD.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Adaptive beaconing for RSU-based intersection assistance systems, Protocols analysis and enhancement

  • Boquet, Guillem|||0000-0002-8683-0421
  • Pisa, Ivan|||0000-0003-3931-9257
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Morell, Antoni|||0000-0003-2249-8594
  • Serrano, Javier|||0000-0003-1235-2145
Current envisaged cooperative vehicular applications require moderate to severe requirements of reliability and latency according to their purpose. Dedicated Short Range Communications (DSRC)-based applications mainly rely on the periodic exchange of information that under certain circumstances may cause congestion problems on the communication channel obtaining unreliable and outdated information at application level. Adaptive beaconing protocols adapt transmission parameters to different criteria such as the channel load and application requirements to improve the overall performance of the vehicle network. Nevertheless, it has not been determined yet if the information disseminated by these protocols is suitable enough for the implementation of specific applications, e.g., Road Side Unit (RSU)-based Intersection Assistance Systems (IAS) like Intersection Collision Risk Warning (ICRW). In this context, we first analyze the network behavior in a realistic simulated intersection area where probability of packet reception becomes difficult to predict and models become highly complex. In that scenario, we present a critical analysis on the performance of current EU and US decentralized congestion control protocols while their performance is evaluated with respect to tracking accuracies required by Intelligent Transportation System (ITS) applications. Results obtained lead us to conclude that adaptation criteria of beaconing protocols is not able to support different safety applications at the same time, that is, there is a tradeoff in the selection of such criteria between enhancing applications supporting vehicles or infrastructure. In that sense, we discuss and provide novel adaptation criteria (Intersection Assistance State Machine, IASM) to improve the performance of beaconing protocols towards assisting safety RSU-based IAS. Finally, we propose and validate through simulations a novel beaconing protocol (Intersection Assistance Protocol, IAP) that improves performance over studied protocols.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Neural network based analysis of random telegraph noise in resistive random access memories

  • González-Cordero, Gerardo|||0000-0002-5627-9827
  • Bargallo Gonzalez, Mireia|||0000-0001-6792-4556
  • Morell, Antoni|||0000-0003-2249-8594
  • Jiménez-Molinos, Francisco|||0000-0002-8866-7568
  • Campabadal, Francesca|||0000-0001-7758-4567
  • Roldán, Juan B.|||0000-0003-1662-6457
The characterization of random telegraph noise (RTN) signals in resistive random access memories (RRAM) is a challenge. The inherent stochastic operation of these devices, much different to what is seen in other electron devices such as MOSFETs, diodes, etc, makes this issue more complicated from the mathematical viewpoint. Nevertheless, the accurate modeling of these type of signals is essential for their use in digital and analog applications. RTN signals are revealed to be linked to the emission and capture of electrons by traps close to the conductive filament that can influence resistive switching operation in RRAMs. RTN features depend on the number of active traps, on the interaction between these traps at different times, on the occurrence of anomalous effects, etc Using a new representation technique, the locally weighted time lag plot (LWTLP), a highly efficient method in terms of computation, data from current-time (I-t) traces can be represented with a pattern that allows the analysis of important RTN signal features. In addition, self-organizing maps, a neural network devoted to clustering, can be employed to perform an automatic classification of the RTN traces that have similar LWTLP patterns. This pattern analysis allows a better understanding of RTN signals and the physics underlying them. The new technique presented can be performed in a reasonable computing time and it is particularly adequate for long (I-t) traces. We introduce here this technique and the most important results that can be drawn when applied to long RTN traces experimentally obtained in RRAMs.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A variational autoencoder solution for road traffic forecasting systems, missing data imputation, dimension reduction, model selection and anomaly detection

  • Boquet, Guillem|||0000-0002-8683-0421
  • Morell, Antoni|||0000-0003-2249-8594
  • Serrano, Javier|||0000-0003-1235-2145
  • Lopez Vicario, Jose|||0000-0002-3574-4697
Efforts devoted to mitigate the effects of road traffic congestion have been conducted since 1970s. Nowadays, there is a need for prominent solutions capable of mining information from messy and multidimensional road traffic data sets with few modeling constraints. In that sense, we propose a unique and versatile model to address different major challenges of traffic forecasting in an unsupervised manner. We formulate the road traffic forecasting problem as a latent variable model, assuming that traffic data is not generated randomly but from a latent space with fewer dimensions containing the underlying characteristics of traffic. We solve the problem by proposing a variational autoencoder (VAE) model to learn how traffic data are generated and inferred, while validating it against three different real-world traffic data sets. Under this framework, we propose an online unsupervised imputation method for unobserved traffic data with missing values. Additionally, taking advantage of the low dimension latent space learned, we compress the traffic data before applying a prediction model obtaining improvements in the forecasting accuracy. Finally, given that the model not only learns useful forecasting features but also meaningful characteristics, we explore the latent space as a tool for model and data selection and traffic anomaly detection from the point of view of traffic modelers.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Application of the Quasi-Static Memdiode Model in Cross-Point Arrays for Large Dataset Pattern Recognition

  • Aguirre, Fernando Leonel|||0000-0001-7793-1194
  • Pazos, Sebastián Matías|||0000-0002-7354-4530
  • Palumbo, Félix|||0000-0002-7749-5035
  • Suñé, Jordi|||0000-0003-0108-4907
  • Miranda, E.|||0000-0003-0470-5318
We investigate the use and performance of the quasi-static memdiode model (QMM) when incorporated into large cross-point arrays intended for pattern classification tasks. Following Chua's memristive devices theory, the QMM comprises two equations, one equation for the electron transport based on the double-diode circuit with single series resistance and a second equation for the internal memory state of the device based on the so-called logistic hysteron or memory map. Ex-situ trained memdiodes with different MNIST-like databases are used to establish the synaptic weights linking the top and bottom wire networks. The role played by the memdiode electrical parameters, wire resistance and capacitance values, image pixelation, connection schemes, signal-to-noise ratio and device-to-device variability in the classification effectiveness are investigated. The confusion matrix is used to benchmark the system performance metrics. We show that the simplicity, accuracy and robustness of the memdiode model makes it a suitable candidate for the realistic simulation of large-scale neural networks with non-idealities.