Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Discrete-time first-order plus dead-time model-reference trade-off PID control design

  • Kurokawa, Ryo
  • Sato, Takao|||0000-0003-0590-3594
  • Vilanova, Ramon|||0000-0002-8035-5199
  • Konishi, Yasuo
The present study proposes a novel proportional-integral-derivative (PID) control design method in discrete time. In the proposed method, a PID controller is designed for first-order plus dead-time (FOPDT) systems so that the prescribed robust stability is accomplished. Furthermore, based on the control performance, the relationship between the servo performance and the regulator performance is a trade-off relationship, and hence, these items are not simultaneously optimized. Therefore, the proposed method provides an optimal design method of the PID parameters for optimizing the reference tracking and disturbance rejection performances, respectively. Even though such a trade-off design method is being actively researched for continuous time, few studies have examined such a method for discrete time. In conventional discrete time methods, the robust stability is not directly prescribed or available systems are restricted to systems for which the dead-time in the continuous time model is an integer multiple of the sampling interval. On the other hand, in the proposed method, even when a discrete time zero is included in the controlled plant, the optimal PID parameters are obtained. In the present study, as well as the other plant parameters, a zero in the FOPDT system is newly normalized, and then, a universal design method is obtained for the FOPDT system with the zero. Finally, the effectiveness of the proposed method is demonstrated through numerical examples.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

LSTM-Based Wastewater Treatment Plants Operation Strategies for Effluent Quality Improvement

  • Pisa, Ivan|||0000-0003-3931-9257
  • Santín López, Ignacio|||0000-0002-4312-1035
  • Morell, Antoni|||0000-0003-2249-8594
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Vilanova, Ramon|||0000-0002-8035-5199
Wastewater Treatment Plants (WWTPs) are facilities devoted to managing and reducing the pollutant concentrations present in the urban residual waters. Some of them consist in nitrogen and phosphorus derived products which are harmful for the environment. Consequently, certain constraints are applied to pollutant concentrations in order to make sure that treated waters comply with the established regulations. In that sense, efforts have been applied to the development of control strategies that help in the pollutant reduction tasks. Furthermore, the appearance of Artificial Neural Networks (ANNs) has encouraged the adoption of predictive control strategies. In such a fashion, this work is mainly focused on the adoption and development of them to actuate over the pollutant concentrations only when predictions of effluents determine that violations will be produced. In that manner, the overall WWTP's operational costs can be reduced. Predictions are generated by means of an ANN-based Soft-Sensor which adopts Long-Short Term Memory cells to predict effluent pollutant levels. These are the ammonium (S-{NH,e}) and the total nitrogen (S-{Ntot,e}) which are predicted considering influent parameters such as the ammonium concentration at the entrance of the WWTP reactor tanks (S-{NH,po}), the reactors' input flow rate (Q-{po}), the WWTP recirculation rate (Q-{a}) and the environmental temperature (T-{as}). Moreover, this work presents a new multi-objective control scenario which consists in a unique control structure performing the reduction of S-{NH,e} and S-{Ntot,e} concentrations simultaneously. Performance of this new control approach is contrasted with other strategies to determine the improvement provided by the ANN-based Soft-Sensor as well as by the fact of being controlling two pollutants at the same time. Results show that some brief and small violations are still produced. Nevertheless, an improvement in the WWTPs performance w.r.t.The most common control strategies around 96.58% and 98.31% is achieved for S-{NH,e} and S-{Ntot,e}, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

ANN-based soft sensor to predict effluent violations in wastewater treatment plants

  • Pisa, Ivan|||0000-0003-3931-9257
  • Santín López, Ignacio|||0000-0002-4312-1035
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Morell, Antoni|||0000-0003-2249-8594
  • Vilanova, Ramon|||0000-0002-8035-5199
Wastewater treatment plants (WWTPs) form an industry whose main goal is to reduce water's pollutant products, which are harmful to the environment at high concentrations. In addition, regulations are applied by administrations to limit pollutant concentrations in effluent. In this context, control strategies have been adopted by WWTPs to avoid violating these limits; however, some violations still occur. For that reason, this work proposes the deployment of an artificial neural network (ANN)-based soft sensor in which a Long-Short Term Memory (LSTM) network is used to generate predictions of nitrogen-derived components, specifically ammonium (S ) and total nitrogen (S ). S is a limiting nutrient and can therefore cause eutrophication, while nitrogen in the S form is toxic to aquatic life. These parameters are used by control strategies to allow actions to be taken in advance and only when violations are predicted. Since predictions complement control strategies, the evaluation of the ANN-based soft sensor was carried out using the Benchmark Simulation Model N.2. (BSM2) and three different control strategies (from low to high control complexity). Results show that our proposed method is able to predict nitrogen-derived products with good accuracy: the probability of detecting violations of BSM2's limits is 86-94%. Moreover, the prediction accuracy can be improved by calibrating the soft sensor; for example, perfect prediction of all future violations can be achieved at the expense of increasing the false positive rate.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Denoising Autoencoders and LSTM-Based Artificial Neural Networks Data Processing for Its Application to Internal Model Control in Industrial Environments-The Wastewater Treatment Plant Control Case

  • Pisa, Ivan|||0000-0003-3931-9257
  • Morell, Antoni|||0000-0003-2249-8594
  • Lopez Vicario, Jose|||0000-0002-3574-4697
  • Vilanova, Ramon|||0000-0002-8035-5199
The evolution of industry towards the Industry 4.0 paradigm has become a reality where different data-driven methods are adopted to support industrial processes. One of them corresponds to Artificial Neural Networks (ANNs), which are able to model highly complex and non-linear processes. This motivates their adoption as part of new data-driven based control strategies. The ANN-based Internal Model Controller (ANN-based IMC) is an example which takes advantage of the ANNs characteristics by modelling the direct and inverse relationships of the process under control with them. This approach has been implemented in Wastewater Treatment Plants (WWTP), where results show a significant improvement on control performance metrics with respect to (w.r.t.) the WWTP default control strategy. However, this structure is very sensible to non-desired effects in the measurements-when a real scenario showing noise-corrupted data is considered, the control performance drops. To solve this, a new ANN-based IMC approach is designed with a two-fold objective, improve the control performance and denoise the noise-corrupted measurements to reduce the performance degradation. Results show that the proposed structure improves the control metrics, (the Integrated Absolute Error (IAE) and the Integrated Squared Error (ISE)), around a 21.25% and a 54.64%, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Industrial Control under Non-Ideal Measurements, Data-Based Signal Processing as an Alternative to Controller Retuning

  • Pisa, Ivan|||0000-0003-3931-9257
  • Morell, Antoni|||0000-0003-2249-8594
  • Vilanova, Ramon|||0000-0002-8035-5199
  • Lopez Vicario, Jose|||0000-0002-3574-4697
Industrial environments are characterised by the non-lineal and highly complex processes they perform. Different control strategies are considered to assure that these processes are correctly performed. Nevertheless, these strategies are sensible to noise-corrupted and delayed measurements. For that reason, denoising techniques and delay correction methodologies should be considered but, most of these techniques require a complex design and optimisation process as a function of the scenario where they are applied. To alleviate this, a complete data-based approach devoted to denoising and correcting the delay of measurements is proposed here with a two-fold objective: simplify the solution design process and achieve its decoupling from the considered control strategy as well as from the scenario. Here it corresponds to a Wastewater Treatment Plant (WWTP). However, the proposed solution can be adopted at any industrial environment since neither an optimization nor a design focused on the scenario is required, only pairs of input and output data. Results show that a minimum Root Mean Squared Error (RMSE) improvement of a 63.87% is achieved when the new proposed data-based denoising approach is considered. In addition, the whole system performance show that similar and even better results are obtained when compared to scenario-optimised methodologies.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Transfer learning in wastewater treatment plant control design, from conventional to long short-term memory-based controllers

  • Pisa, Ivan|||0000-0003-3931-9257
  • Morell, Antoni|||0000-0003-2249-8594
  • Vilanova, Ramon|||0000-0002-8035-5199
  • Lopez Vicario, Jose|||0000-0002-3574-4697
In the last decade, industrial environments have been experiencing a change in their control processes. It is more frequent that control strategies adopt Artificial Neural Networks (ANNs) to support control operations, or even as the main control structure. Thus, control structures can be directly obtained from input and output measurements without requiring a huge knowledge of the processes under control. However, ANNs have to be designed, implemented, and trained, which can become complex and time-demanding processes. This can be alleviated by means of Transfer Learning (TL) methodologies, where the knowledge obtained from a unique ANN is transferred to the remaining nets reducing the ANN design time. From the control viewpoint, the first ANN can be easily obtained and then transferred to the remaining control loops. In this manuscript, the application of TL methodologies to design and implement the control loops of a Wastewater Treatment Plant (WWTP) is analysed. Results show that the adoption of this TL-based methodology allows the development of new control loops without requiring a huge knowledge of the processes under control. Besides, a wide improvement in terms of the control performance with respect to conventional control structures is also obtained. For instance, results have shown that less oscillations in the tracking of desired set-points are produced by achieving improvements in the Integrated Absolute Error and Integrated Square Error which go from 40.17% to 94.29% and from 34.27% to 99.71%, respectively.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Anaerobic digestion process control using a data-driven internal model control method

  • Condrachi, Larisa
  • Vilanova, Ramon|||0000-0002-8035-5199
  • Meneses, Montse|||0000-0002-5846-2676
  • Barbu, Marian|||0000-0001-6645-3705
Anaerobic digestion processes offer the possibility for wastewater treatment while obtaining a benefit through the obtained biogas. This paper aims to continue the effort to adopt data-driven control methods in the case of anaerobic digestion processes. The paper proposes a data-based Internal Model Control approach applied to an anaerobic digestion process. The paper deals extensively with the issue of choosing the reference model and proposing an engineering approach to this issue. The paper also addresses the issue of verifying robust stability, a very important aspect considering the uncertainties that characterize bioprocesses in general. The approach proposed in the paper is validated through a numerical simulation using the Anaerobic Digestion Model No. 1. During the validation of the proposed control solution, the main operating conditions were analyzed, such as the setpoint tracking performance, the rejection of disturbance generated by variations in the influent concentration, and the effect of the measurement noise on the controlled variable.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Design of feedback control strategies in a plant-wide wastewater treatment plant for simultaneous evaluation of economics, energy usage, and removal of nutrients

  • Sheik, Abdul
  • Tejaswini, Egalapati
  • Seepana, Murali
  • Ambati, Seshagiri
  • Meneses, Montse|||0000-0002-5846-2676
  • Vilanova, Ramon|||0000-0002-8035-5199
Simultaneous removal of nitrogen and phosphorous is a recommended practice while treating wastewater. In the present study, control strategies based on proportional-integral (PI), model predictive control (MPC), and fuzzy logic are developed and implemented on a plant-wide wastewater treatment plant. Four combinations of control frameworks are developed in order to reduce the operational cost and improve the effluent quality. As a working platform, a Benchmark simulation model (BSM2-P) is used. A default control framework with PI controllers is used to control nitrate and dissolved oxygen (DO) by manipulating the internal recycle and oxygen mass trans-fer coefficient (KLa). Hierarchical control topology is proposed in which a lower-level control framework with PI controllers is implemented to DO in the sixth reactor by regulating the KLa of the fifth, sixth, and seventh reactors, and fuzzy and MPC are used at the supervisory level. This supervisory level considers the ammonia in the last aerobic reactor as a feedback signal to alter the DO set-points. PI-fuzzy showed improved effluent quality by 21.1%, total phosphorus removal rate by 33.3% with an increase of operational cost, and a slight increase in the production rates of greenhouse gases. In all the control design frameworks, a trade-off is observed between operational cost and effluent quality.