Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Fusibles estructurales para evitar la propagación de fallos en las cimbras de edificación

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Calderón García, Pedro Antonio|||0000-0002-9783-9333
  • Moragues, Juan J|||0000-0001-8111-5480
  • Oliver-Cano, Marina
  • Adam, Jose M|||0000-0002-9205-8458
[ES] La construcción de edificios con estructura de hormigón armado se realiza, habitualmente, con la ayuda de puntales metálicos que se encargan de transmitir las cargas de las plantas recién hormigonadas a las inferiores. Los principales problemas que presenta el empleo de puntales son: a) la aparición de cargas superiores a las previstas en los puntales, pudiendo provocar el colapso de toda la cimbra o incluso del edificio, b) la heterogeneidad de las cargas que reciben los puntales de una misma planta cimbrada, y c) la limitada variedad de puntales de que disponen las casas comerciales. Todo ello obliga a que, en la mayor parte de las ocasiones, los puntales empleados en las obras estén claramente sobredimensionados. En este artículo se presenta el fusible estructural para el control de la carga de los puntales (también llamado limitador de carga o LL por sus siglas en inglés), que fue desarrollado en ICITECH a partir de estudios teóricos avanzados, una intensa campaña experimental y la ejecución de una prueba de concepto. El artículo se compone de: 1) una breve recopilación de los trabajos experimentales y de validación computacional llevados a cabo; y 2) el estudio realizado con simulación numérica avanzada para evaluar y cuantificar la posible mitigación del daño y el riesgo de fallo de estructuras de edificios durante su construcción. De los resultados obtenidos se puede afirmar que con el uso de LLs se consigue una mejora: de la seguridad, frente a fallos locales de la cimbra cuyas consecuencias podrían propagarse de forma desproporcionada; de la eficiencia estructural, con una mayor uniformidad en las cargas que reciben los puntales; y de los costes del sistema de apuntalamiento., Los autores quieren expresar su gratitud a todas las entidades por la financiación recibida (FPU13/02466; PRX17/00302; GV/2015/063; APOSTD/2019/101; 101000396; IJC2020- 042642-I), así como a las empresas Encofrado J. Alsina S.A. y Levantina, Ingeniería y Construcción S.L. por su invalorable cooperación.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Tests on a Full-Scale Precast Building for Robustness Assessment

  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Adam, Jose M|||0000-0002-9205-8458
[EN] As modern society faces unprecedented challenges related to climate stability and conflict, the need to design more sustainable and resilient buildings is undeniable. Several studies show that building with precast concrete components can result in significant advantages with respect to sustainability. However, the fact that such structures exhibit clear lines of weakness at the joints between elements can make them more vulnerable to progressive collapse. Although this can be overcome by adequate detailing of connections, there exist several uncertain factors which may affect the interaction between different precast elements and the global behaviour of such structural systems. This means that experimental testing is usually required for safe development of adequate solutions. Despite this fact, there have been very few studies on the robustness of precast concrete structures when compared to research on cast-in-place and steel structures. As such, this work presents the results of an ambitious experimental campaign involving the sudden removal of 3 different columns from a specifically built 15 m x 12 m two-storey precast concrete building incorporating simple and practical solutions to enhance robustness., This article is part of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union¿s Horizon 2020 research and innovation programme (Grant agreement No. 101000396). The authors would like to acknowledge the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/ 10.13039/501100011033 and ¿ERDF A way of making Europe¿. The authors would also like to express their gratitude for funding received under the postdoctoral programs of Generalitat Valenciana/European Social Fund [APOSTD/2019/101] and grant IJC2020-042642-I funded by MCIN/AEI/ 10.13039/501100011033 and by ¿European Union NextGenerationEU/PRTR¿. The help and support provided by Ayman El-Fouly (Applied Science International) for performing simulations in ELS is also gratefully acknowledged. Finally, the authors are also grateful for the invaluable cooperation of the Levantina, Ingeniería y Construcción S.L. (LIC) company, and the contribution of members and collaborators of the Building Resilient research group.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Large-Scale Tests on RC Purpose-Built Buildings for Improving Robustness

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[EN] Although recent years have been marked by a substantial research effort on the progressive collapse of steel as well as cast-in-place and precast concrete structures, the fact is that almost all studies are focused on reduced-scale tests, tests on isolated frame structures, tests on substructures or analytical and numerical analysis. Within this context, large-scale tests avoid size effects and allow all resisting mechanisms that a structure can develop after an initial-local failure to be studied. This paper presents the case of large-scale tests performed on two purpose-built buildings: one made of cast-in-place concrete and the other with precast concrete elements. In both cases, sudden column removal scenarios were considered for the robustness assessment of the structural system. The structures were provided with simple solutions to enhance the robustness and arrest progressive collapse initiated by the sudden failure of a column. The cast-in-place concrete building had two 3 m high floors, with 2 × 2 bays of 5 m span length. The total in-plan dimensions of the building were 10 × 10 m2. This building was subjected to sudden corner column failure scenarios with and without the presence of infill masonry walls. The precast concrete structure also had two 3 m high floors, with 3 × 2 bays of 5 m and 6 m span, respectively. The total in-plan dimensions of the building were 15 × 12 m2. This building was subjected to sudden column failure scenarios for three different tests, involving the removal of: a corner column, an edge column in a frame parallel to the direction of one-way hollow-core slabs, and an edge column in a frame perpendicular to the one-way slabs. This paper presents and discusses a summary of the results and outcomes of these studies., The work for the cast-in-place concrete building was carried out with the support of a 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation. The work for the precast concrete building was carried out with the funding received through grant BIA2017-88322-R-AR funded by MCIN/AEI/10.13039/501100011033 and ERDF A way of making Europe. This research also serves as the basis of a project (Endure) that has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (Grant Agreement No. 101000396). The authors would also like to express their gratitude to the Levantina, Ingeniería y Construcción S.L. (LIC) company for funding the construction of the building, and to the Generalitat Valenciana/Fons Social Europeu [APOSTD/2019/101], grant IJC2020-042642-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGeneration EU/PRTR, and Universitat Politècnica de València [PAID-10-17] for funding received under different postdoctoral programs.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Mean ergodic operators and reflexive Fréchet lattices

  • Bonet Solves, José Antonio|||0000-0002-9096-6380
  • de Pagter, Ben
  • Ricker, Werner Joseph
Connections between (positive) mean ergodic operators acting in Banach lattices and properties of the underlying lattice itself are well understood (see the works of Emel'yanov, Wolff and Zaharopol). For Frechet lattices (or more general locally convex solid Riesz spaces) there is virtually no information available. For a Frechet lattice E, it is shown here that (amongst other things) every power-bounded linear operator on E is mean ergodic if and only if E is reflexive if and only if E. is Dedekind sigma-complete and every positive power-bounded operator on E is mean ergodic if and only if every positive power-bounded operator in the strong dual E'(beta) (no longer a Frechet lattice) is mean ergodic. An important technique is to develop criteria that detect when E admits a (positively) complemented lattice copy of c(0) l(1) or l(infinity). © Copyright © Royal Society of Edinburgh 2011., J.B. was partly supported by MEC and FEDER Project MTM 2007-62643, GV Project Prometeo 2008/101 and the net MTM 2007-30904-E (Spain). B.D.P. gratefully acknowledges the support of the Alexander von Humboldt Foundation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Surveying Safety-relevant AI Characteristics

  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Avin, Shahar
  • Heigeartaigh, Sean O.
[EN] The current analysis in the AI safety literature usually combines a risk or safety issue (e.g., interruptibility) with a particular paradigm for an AI agent (e.g., reinforcement learning). However, there is currently no survey of safety-relevant characteristics of AI systems that may reveal neglected areas of research or suggest to developers what design choices they could make to avoid or minimise certain safety concerns. In this paper, we take a first step towards delivering such a survey, from two angles. The first features AI system characteristics that are already known to be relevant to safety concerns, including internal system characteristics, characteristics relating to the effect of the external environment on the system, and characteristics relating to the effect of the system on the target environment. The second presents a brief survey of a broad range of AI system characteristics that could prove relevant to safety research, including types of interaction, computation, integration, anticipation, supervision, modification, motivation and achievement. This survey enables further work in exploring system characteristics and design choices that affect safety concerns, FMP and JHO were supported by the EU (FEDER) and the Spanish MINECO under grant TIN 2015-69175-C4-1-R, by Generalitat Valenciana (GVA) under grant PROME-TEOII/2015/013 and by the U.S. Air Force Office of Scientific Research under award number FA9550-17-1-0287. FMP was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigacion avanzada en ciberseguridad), the European Commission, JRC¿s Centre for Advanced Studies, HUMAINT project (Expert Contract CT-EX2018D335821-101), and UPV PAID-06-18 Ref. SP20180210. JHO was supported by a Salvador de Madariaga grant (PRX17/00467) from the Spanish MECD for a research stay at the Leverhulme Centre for the Future of Intelligence (CFI), Cambridge, and a BEST grant (BEST/2017/045) from GVA for another research stay also at the CFI. JHO and SOH were supported by the Future of Life Institute (FLI) grant RFP2-152. SOH was also supported by the Leverhulme Trust Research Centre Grant RC2015-067 awarded to the Leverhulme Centre for the Future of Intelligence, and a a grant from Templeton World Charity Foundation
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Does AI Qualify for the Job?: A Bidirectional Model Mapping Labour and AI Intensities

  • Martínez-Plumed, Fernando|||0000-0003-2902-6477
  • Hernández-Orallo, José|||0000-0001-9746-7632
  • Tolan, Songül
  • Pesole, Annarosa
  • Fernández-Macías, Enrique
  • Gómez, Emilia
[EN] In this paper we present a setting for examining the relation between the distribution of research intensity in AI research and the relevance for a range of work tasks (and occupations) in current and simulated scenarios. We perform a mapping between labour and AI using a set of cognitive abilities as an intermediate layer. This setting favours a two-way interpretation to analyse (1) what impact current or simulated AI research activity has or would have on labour-related tasks and occupations, and (2) what areas of AI research activity would be responsible for a desired or undesired effect on specific labour tasks and occupations. Concretely, in our analysis we map 59 generic labour-related tasks from several worker surveys and databases to 14 cognitive abilities from the cognitive science literature, and these to a comprehensive list of 328 AI benchmarks used to evaluate progress in AI techniques. We provide this model and its implementation as a tool for simulations. We also show the effectiveness of our setting with some illustrative examples., This material is based upon work supported by the EU (FEDER), and the Spanish MINECO under grant RTI2018-094403-B-C3, the Generalitat Valenciana PROMETEO/2019/098. F. Martínez-Plumed was also supported by INCIBE (Ayudas para la excelencia de los equipos de investigación avanzada en ciberseguridad), the European Commission (JRC) HUMAINT project (CT-EX2018D335821-101), and UPV (PAID-06-18). J. H-Orallo is also funded by an FLI grant RFP2-152.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Robustez de estructuras prefabricadas de hormigón: simulación computacional mediante applied element method

  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
  • Adam, Jose M|||0000-0002-9205-8458
  • Mezquida-Alcaraz, Eduardo J.
[ES] El colapso progresivo puede definirse como el proceso por el cual un daño local inicial pone en marcha una cadena de fallos, que a veces puede conducir a un colapso desproporcionado o total. Se trata de un fenómeno que a menudo puede ser desencadenado por cargas anormales causadas por eventos extremos, a los que pueden estar expuestos todo tipo de edificios. A pesar de que las estructuras prefabricadas de hormigón, cada vez más utilizadas, pueden ser especialmente vulnerables al colapso progresivo, se han realizado relativamente pocos estudios sobre la robustez de esta tipología estructural en comparación con las estructuras hormigonadas in situ. Los modelos computacionales validados a partir de resultados experimentales son una de las herramientas más prometedoras para comprender mejor la respuesta de las estructuras prefabricadas de hormigón frente a acciones accidentales. Este trabajo presenta el empleo de una nueva estrategia de modelización, el Applied Element Method, que se ha empleado para predecir el comportamiento de un edificio-probeta de hormigón prefabricado bajo diferentes escenarios de retirada de columnas. Estos resultados se han utilizado para planificar la estrategia de monitorización y el esquema de carga para las pruebas experimentales en una estructura real de dos plantas de 15 m x 12 m que se construirá y monitorizará durante la retirada repentina de tres columnas diferentes., El trabajo presentado en este artículo no habría sido posible sin la financiación recibida del Ministerio de Ciencia e Innovación para el proyecto PREBUST (BIA2017-88322-R-AR) y para la ayuda Juan de la Cierva-Incorporación (IJC2020-042642-I). Los autores desean agradecer a Pedro A. Calderón y Juan J. Moragues su inestimable ayuda y apoyo. También se agradece a Ayman El-Fouly, de Applied Science International, su inestimable colaboración.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Colapso progresivo y robustez de edificios y puentes, Progressive collapse and robustness of buildings and bridges

  • Adam, Jose M|||0000-0002-9205-8458
  • Buitrago, Manuel|||0000-0002-5561-5104
  • Makoond, Nirvan Chandra|||0000-0002-5203-6318
[ES] Los últimos años han estado marcados por un número cada vez más elevado de estudios sobre el colapso progresivo y la robustez estructural como consecuencia de la persistente aparición y aparentemente creciente frecuencia de fallos estructurales catastróficos. En la actualidad, la gran mayoría de estos estudios se centran en simulaciones computacionales y en pruebas de laboratorio de subestructuras a escala reducida. Aunque esta filosofía de estudio ha permitido avanzar sustancialmente en la materia, estas estrategias se caracterizan por sus importantes limitaciones, que sólo pueden superarse mediante ensayos a escala real de las estructuras. Este artículo presenta algunos de los principales trabajos de investigación realizados en este sentido por el grupo de investigación Building Resilient del instituto ICITECH de la Universitat Politècnica de València. Se presentan los trabajos más importantes relacionados con el cimbrado de edificios, las estructuras de edificios de hormigón armado ejecutadas in situ y prefabricadas, los puentes metálicos en celosía y los edificios segmentados por fusibles, junto con los resultados más significativos obtenidos hasta el momento., Estos trabajos no hubieran dado sus frutos sin la financiación y ayuda recibidas por: FGV (Ferrocarrils de la Generalitat Valenciana), Calsens, Ministerio de Ciencia e Innovación, Generalitat Valenciana, Ministerio de Educación y Formación Profesional, Fundación BBVA, European Research Council, LIC Levantina, Ingeniería y Construcción, y Encofrados Alsina.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Library-based adaptive observation through a sparsity-promoting adaptive observer

  • Cecilia Piñol, Andreu
  • Costa Castelló, Ramon
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper proposes an adaptive observer for a class of nonlinear system with linear parametrization. The main novelty of the technique is that the regressor vector is considered to be unknown. Instead, a library of candidate non-linear functions is implemented, which transforms the original parameter vector into a new one that is characterized by being sparse. In such problem, it is shown that standard adaptive observers cannot recover the original vector due to a lack of persistence of excitation. Instead, a parameter-adaptation with an implicit l1 regularization is implemented. It is shown that this new observer can recover the parameter vector under standard assumptions of sparse signal recovery. The results are validated in a numerical simulation., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the project DOVELAR (ref. RTI2018-096001-B-C32) and by the PTI FLOWBAT 2021 project (ref. 642 201980E101)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Flow controlling tuning for the voltage of a redox flow battery considering the effect of overpotentials

  • Clemente Escuin, Antonio
  • Costa Castelló, Ramon
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This conference paper presents a comparison between a H8 control technique and a classical PID, applied on a redox flow battery system. The study presents a dynamic nonlinear electrochemical model that considers the effect of over-potentials losses in the computation of the voltage measurement. The controller is designed to regulate the output voltage of the battery. The H8 controller is designed using the classical weighting function approach while the PID controller is tuned using a particle swarm optimizer. Finally, a comparison between the designed H8 controller, and the classic PID is presented., This research was supported by the CSIC under the PTI FLOWBAT 2021 project (ref. 642 201980E101), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Stochastic neural radiance fields: quantifying uncertainty in implicit 3D representations

  • Shen, Jianxiong
  • Ruiz Ovejero, Adrià
  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Neural Radiance Fields (NeRF) has become a popular framework for learning implicit 3D representations and addressing different tasks such as novel-view synthesis or depth-map estimation. However, in downstream applications where decisions need to be made based on automatic predictions, it is critical to leverage the confidence associated with the model estimations. Whereas uncertainty quantification is a long-standing problem in Machine Learning, it has been largely overlooked in the recent NeRF literature. In this context, we propose Stochastic Neural Radiance Fields (S-NeRF), a generalization of standard NeRF that learns a probability distribution over all the possible radiance fields modeling the scene. This distribution allows to quantify the uncertainty associated with the scene information provided by the model. S-NeRF optimization is posed as a Bayesian learning problem that is efficiently addressed using the Variational Inference framework. Exhaustive experiments over benchmark datasets demonstrate that S-NeRF is able to provide more reliable predictions and confidence values than generic approaches previously proposed for uncertainty estimation in other domains., This work is supported partly by the Chinese Scholarship Council (CSC) under grant (201906120031), by the Spanish government under project MoHuCo PID2020- 120049RB-I00, the ERA-Net Chistera project IPALM PCI2019-103386 and María de Maeztu Seal of Excellence MDM-2016-0656. Adria Ruiz acknowledges financial support from MICINN through the program Juan de la Cierva., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SOC and diffusion rate estimation in redox flow batteries: An I&I-based high-gain observer approach

  • Clemente Escuin, Antonio
  • Cecilia Piñol, Andreu
  • Costa Castelló, Ramon
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents an adaptive non-linear observer for the state of charge estimation in vanadium redox flow batteries. The study is based directly on the use of non-linear equations that describe the evolution of the species concentration inside the system, and a nonlinear cell voltage expression that takes into account the effect of overpotentials. Moreover, a more realistic approach is used which does not consider that the electrolyte concentration is the same in the catholyte and anolyte sides of the system. It is shown that the state of charge can be estimated through the measurement of the output voltage and a high-gain observer. Nonetheless, the accuracy of the estimation is affected by uncertainty in the system diffusion rates. For this reason, the observer is robustified by means of an immersive and invariance adaptive parameter estimation. The results are validated in a numerical simulation., This research was funded by the CSIC under the PTI FLOWBAT 2021 project (ref. 642 201980E101), the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32), and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)., Peer Reviewed, Postprint (author's final draft)