Pasar al contenido principal

CONTROL Y GESTION DE ENERGIA EN VEHICULOS ELECTRICOS HIBRIDOS CON PILAS DE COMBUSTIBLE

RTI2018-096001-B-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 90
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Observador de alta ganancia con zona muerta ajustable para estimar la saturación de agua líquida en pilas de combustible tipo PEM, High gain observer with dynamic deadzone to estimate liquid water saturation in PEM fuel cells

  • Cecilia, A.
  • Costa-Castelló, R.
[EN] In the area of PEM fuel cells, water management remains one of the most challenging issues affecting PEMFC efficiency and lifetime. Liquid water active control and supervision techniques are limited by the absence of online sensors that can estimate the liquid water saturation. For this reason, this work presents the design of a state observer to estimate the cathode catalyst layer's liquid water saturation of an open-cathode PEM fuel cell. The proposed observer is based on High-Gain techniques, and is modified with a dynamic dead-zone which reduces the observer's noise sensibility. The results have been validated through numerical simulation and experiments. It is shown that, in the absence of noise, the proposed observer presents a similar performance than its non dead-zone equivalent. Moreover, in the presence of noise, the dead-zone significantly reduces the estimation error induced by it., [ES] En el campo de las pilas de combustible PEM, la gestión de agua líquida es una de las problemáticas más importantes que afectan a la eficiencia y vida útil del sistema. Las técnicas de control activo y supervisión del agua se ven limitadas por la ausencia de sensores que puedan medir la saturación de agua líquida en línea. Por eso, en este trabajo se presenta el diseño de un observador de estado para la estimación de la saturación de agua líquida en la capa catalizadora del cátodo de una pila de combustible PEM de cátodo abierto. El observador propuesto se basa en técnicas de alta ganancia. Además, se modifica con una función de zona muerta autoajustable con el fin de reducir su sensibilidad al ruido en la medida. Los resultados se han validado mediante simulación numérica y experimentación. Estos muestran que, en ausencia de ruido, el observador propuesto presenta unas prestaciones similares a las de su equivalente sin zona muerta. Además, en presencia de ruido, la zona muerta disminuye significativamente el error de estimación inducido por este., Este proyecto se ha financiado parcialmente por el proyecto DOVELAR (ref. RTI2018-096001-B-C32). Este trabajo se ha realizado con el apoyo de la Agencia Estatal de Investigación española a través del sello de excelencia de María de Maeztu, IRI (MDM-2016-0656). Este trabajo se ha financiado parcialmente por AGAUR of Generalitat de Catalunya a través de la subvención del grupo Advanced Control Systems (SAC) (2017 SGR 482). Este trabajo se ha realizado con el apoyo de ACCIÓ (Operational Program FEDER Catalunya 2014-2020) a través de REFER project (COMRDI15-1-0036-11).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Un enfoque interactivo para el análisis y diseño de sistemas de control utilizando el método del lugar de las raíces, An interactive approach to control systems analysis and design by the root locus technique

  • Díaz, J. M.
  • Costa-Castelló, R.
  • Dormido, S.
[EN] The root locus is a classic method for linear control systems analysis. Since its interruption in the fifties, it has been included in introductory undergraduate courses on control systems. The emergence of interactive control system design software tools, which easily draw the root locus, allows teachers to focus on explaining how the introduction of new poles/zeros in the openloop transfer function affects the root locus, instead of explaining its building rules. In this work, a new teaching methodology in presented to introduce the root locus technique in introductory courses on control systems that encourages the use of an interactive tool, such as the LCSD tool developed by the authors, to reinforce their learning., [ES] El lugar de las raíces es un método clásico para el análisis y diseño de sistemas lineales de control que ha formado parte desde su irrupción en los años cincuenta de los programas de los cursos básicos de control automático. La aparición de herramientas software de diseño interactivo de sistemas de control, que dibujan fácilmente el lugar de las raíces, permite a los docentes centrarse en explicar cómo afecta al lugar de las raíces la introducción de nuevos polos/ceros en la función de transferencia en lazo abierto, en vez de en explicar sus reglas de construcción. En este trabajo se presenta una nueva metodología docente para introducir la técnica del lugar de las raíces en cursos básicos de control que fomenta la utilización de una herramienta interactiva, como por ejemplo la herramienta LCSD desarrollada por los autores, para reforzar su aprendizaje., Este trabajo ha sido financiado por el Ministerio de Ciencia, Innovación y Universidades bajo los proyectos ECoDiC ref. RTI2018-094665-B-I00 y DOVELAR ref. RTI2018-096001-B-C32.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control Super-Twisting con adaptación basada en cruce por cero. Análisis de estabilidad y validación, Super-Twisting control with zero crossing gain adaptation. Stability analysis and validation

  • Anderson, Jorge Luis
  • Moré, Jerónimo José
  • Puleston, Paul Federico
  • Roda, Vicente
  • Costa-Castelló, Ramón
[EN] In the latest years, the Second Order Sliding Mode (SOSM) control have been emerged as a powerful alternative to traditional sliding mode control. Within this kind of algorithms, the SOSM Super-Twisting Algorithm (STA) allows to significantly reduce the control chattering (high frequency oscillations), through its continuous control action, while preserving conventional SMC's features of robustness and finite time convergence. However, in practical implementation, it is sometimes required to oversize the STA gains, in order to allow the system controller to deal with large, but commonly sporadic, disturbances. This situation produces an inevitable increment of control effort and, in consequence, and increment of control chattering. In this framework, in the present paper the stability analysis and validation of an adaptation mechanism for the Super-Twisting Algorithm are developed. It is based on the zero crossing gain adaptation approach developed by Pisano et al. for systems of relative degree 2. Firtsly, the proposed algorithm is validated by simulation for its application on a power converter system. Then, the controlled system is implemented on a experimental 700W power platform. The results showed an important reduction of control chattering, and similar features of robustness, in comparison with the conventional Super-Twisting Algorithm., [ES] En los últimos años, los algoritmos de control diseñados a partir de técnicas por Modos Deslizantes de Segundo Orden (MDSO) se han consolidado como una importante alternativa al modos deslizantes tradicional. Dentro de estos algoritmos, el control por MDSO Super-Twisting permite una importante reducción del chattering (oscilaciones de alta frecuencia), gracias a su acción de control continua, manteniendo las características de robustez y convergencia en tiempo finito deseadas. Sin embargo, en su implementación práctica, en ciertas ocasiones es necesario sobredimensionar las ganancias del controlador, con el objetivo de permitir el rechazo de grandes, aunque usualmente esporádicas, perturbaciones. Esto redunda inevitablemente en un incremento en el esfuerzo del controlador y, por ende, en un incremento del chattering del sistema. De esta manera, en este trabajo se presenta el análisis de estabilidad y validación de un mecanismo de Adaptación de Ganancias para un algoritmo de control por MDSO Super-Twisting. El mismo, continúa con el enfoque de adaptación basada en cruce por cero desarrollado por Pisano et al. para sistemas con grado relativo 2. El algoritmo propuesto es evaluado, en primera instancia. por simulación para el caso de aplicación de un sistema de potencia. Posteriormente, el sistema controlado es implementado y validado experimentalmente en una plataforma de 700W. Los resultados obtenidos mostraron una importante reducción del chattering y similares características de robustez, en comparación con el algoritmo Super-Twisting tradicional., Este trabajo fue realizado bajo el apoyo de la FI-UNLP, CONICET y Agencia I+D+i. El trabajo fue parcialmente financiado por el proyecto nacional de España DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE), la Agencia Nacional de Investigación de España a través del Sello de Excelencia María de Maeztu al IRI (MDM-2016-0656) y la Asociación Universitaria Iberoamericana de Postgrado (AUIP).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Herramientas para la docencia de control digital en grados de ingeniería, Tools for teaching digital control in engineering degrees

  • Lerma, E.
  • Costa-Castelló, R.
  • Griñó, R.
  • Sanchis, C.
[EN] This work describes a set of teaching materials that have been developed to support the learning of digital control. In particular, it presents a set of interactive tools and the project Duino-Based Learning (DBL) that has been designed to develop experimental practices of digital control using Arduino. In addition, the paper depicts the contents of a digital control course, taught in the framework of an industrial engineering degree, and how the developed tools are used in its teaching., [ES] En este trabajo se describen un conjunto de materiales pedagógicos que han sido desarrollados para dar soporte a la docencia del control digital. En particular, se presentan un conjunto de herramientas interactivas y el proyecto Duino-Based Learning (DBL) pensado para desarrollar prácticas experimentales de control digital utilizando Arduino. Además, se describe el contenido de un curso de control digital, que  se imparte en el marco de una titulación de ingeniería industrial, y como se utilizan las diferentes herramientas desarrolladas en su docencia., El trabajo de E. Lerma ha sido financiado por la donación de Mathworks UPC-I-01523. El trabajo de R. Griñó ha sido parcialmente financiado por el Gobierno de España a través de la Agencia Estatal de Investigación Proyecto DPI2017-85404-P, la Generalitat de Catalunya a través del Proyecto 2017 SGR 872 y la donación de Mathworks UPC-I-01523. El trabajo de R. Costa-Castelló ha sido parcialmente financiado por el Gobierno de España a través de la Agencia Estatal de Investigación Proyecto DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE) y “María de Maeztu Seal of Excellence to IRI” (MDM-2016-0656), la Generalitat de Catalunya a través del Proyecto 2017 SGR 482 y la donación de Mathworks UPC-I-01523.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimal Energy Management in a Standalone Microgrid, with Photovoltaic Generation, Short-Term Storage, and Hydrogen Production

  • Cecilia, Andreu
  • Carroquino, Javier
  • Roda, Vicente
  • Costa Castelló, Ramon
  • Barreras Toledo, Félix
© 2020 by the authors., This paper addresses the energy management of a standalone renewable energy system. The system is configured as a microgrid, including photovoltaic generation, a lead-acid battery as a short term energy storage system, hydrogen production, and several loads. In this microgrid, an energy management strategy has been incorporated that pursues several objectives. On the one hand, it aims to minimize the amount of energy cycled in the battery, in order to reduce the associated losses and battery size. On the other hand, it seeks to take advantage of the long-term surplus energy, producing hydrogen and extracting it from the system, to be used in a fuel cell hybrid electric vehicle. A crucial factor in this approach is to accommodate the energy consumption to the energy demand and to achieve this, a model predictive control (MPC) scheme is proposed. In this context, proper models for solar estimation, hydrogen production, and battery energy storage will be presented. Moreover, the controller is capable of advancing or delaying the deferrable loads from its prescheduled time. As a result, a stable and efficient supply with a relatively small battery is obtained. Finally, the proposed control scheme has been validated on a real case scenario., This work has been partially funded by the Spanish national project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482). This work has been done with the support of ACCIÓ (Operational Program FEDER Catalunya 2014-2020) through the REFER project (COMRDI15-1-0036-11)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Model Predictive Control-Based Energy Management Scheme for Hybrid Storage System in Islanded Microgrids

  • Nair, Unnikrishnan Raveendran
  • Costa Castelló, Ramon
Model predictive control (MPC) facilitates online optimal resource scheduling in electrical networks, thermal systems, water networks, process industry to name a few. In electrical systems, the capability of MPC can be used not only to minimise operating costs but also to improve renewable energy utilisation and energy storage system degradation. This work assesses the application of MPC for energy management in an islanded microgrid with PV generation and hybrid storage system composed of battery, supercapacitor and regenerative fuel cell. The objective is to improve the utilisation of renewable generation, the operational efficiency of the microgrid and the reduction in rate of degradation of storage systems. The improvements in energy scheduling, achieved with MPC, are highlighted through comparison with a heuristic based method, like Fuzzy inference. Simulated behaviour of an islanded microgrid with the MPC and fuzzy based energy management schemes will be studied for the same. Apart from this, the study also carries out an analysis of the computational demand resulting from the use of MPC in the energy management stage. It is concluded that, compared to heuristic methods, MPC ensures improved performance in an islanded microgrid., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska Curie under Grant 675318 (INCITE), in part by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the Spanish National Project DOVELAR (MCIU/AEI/FEDER, UE) under Grant RTI2018-096001-B-C32.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Control-oriented modelling and analysis of a solid oxide fuel cell system

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Na, Jing
  • Renaudineau, Hugues
In this paper, a control-oriented model of a solid oxide fuel cell system is formulated and analyzed in detail. First, a lumped model based on first principle laws is formulated and tuned using experimental data coming from a real solid oxide fuel cell system test bench. The model calibration is carried out based on an optimization approach to minimize the error between the experimental data and the model one. To systematically analyze the system behavior, an equilibrium point analysis is formulated and developed. The analysis results show the maximum steady-state electrical power under each constant stack temperature. This will allow to appropriately select operation points during the system operation. Secondly, Lyapunov's theory is used to characterize the local stability of the equilibrium points. The results show that the equilibrium points are locally stable. Besides, comparison between the initial nonlinear model with the linearized model is performed to show the efficacy of the linearised model analysis. Finally, the frequency response of the linearized model is performed. This analysis provides key information about control system design in order to efficiently operate the solid oxide fuel cell system., This work was partially funded by ACCIÓ (Operational Program FEDER Catalunya 2014-2020) through the REFER project (COMRDI15-1-0036-11), the Spanish national project DOVELAR (ref. RTI2018-096001-B-C32) and the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work was partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482) and Chinese Scholarship Council (CSC) under grant (201808390007). This work was partially funded by National Natural Science Foundation of China under Grants 61922037.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observador de alta ganancia con zona muerta ajustable para estimar la saturación de agua líquida en pilas de combustible tipo PEM, High gain observer with dynamic deadzone to estimate liquid water saturation in PEM fuel cells

  • Cecilia, Andreu
  • Costa Castelló, Ramon
[EN] In the area of PEM fuel cells, water management remains one of the most challenging issues affecting PEMFC efficiency and lifetime. Liquid water active control and supervision techniques are limited by the absence of online sensors that can estimate the liquid water saturation. For this reason, this work presents the design of a state observer to estimate the cathode catalyst layer's liquid water saturation of an open-cathode PEM fuel cell. The proposed observer is based on High-Gain techniques, and is modified with a dynamic dead-zone which reduces the observer's noise sensibility. The results have been validated through numerical simulation and experiments. It is shown that, in the absence of noise, the proposed observer presents a similar performance than its non dead-zone equivalent. Moreover, in the presence of noise, the dead-zone significantly reduces the estimation error induced by it., [ES] En el campo de las pilas de combustible PEM, la gestion´ de agua l´ıquida es una de las problematicas ´ mas´ importantes que afectan a la eficiencia y vida util ´ del sistema. Las tecnicas ´ de control activo y supervision´ del agua se ven limitadas por la ausencia de sensores que puedan medir la saturacion´ de agua l´ıquida en l´ınea. Por eso, en este trabajo se presenta el diseno˜ de un observador de estado para la estimacion´ de la saturacion´ de agua l´ıquida en la capa catalizadora del catodo ´ de una pila de combustible PEM de catodo ´ abierto. El observador propuesto se basa en tecnicas ´ de alta ganancia. Ademas, ´ se modifica c on u na f uncion´ de zona muerta autoajustable con el fin de reducir su sensibilidad al ruido en la medida. Los resultados se han validado mediante simulacion´ numerica ´ y experimentacion. ´ Estos muestran que, en ausencia de ruido, el observador propuesto presenta unas prestacionessimilares a las de su equivalente sin zona muerta. Ademas, ´ en presencia de ruido, la zona muerta disminuye significativamente el error de estimacion´ inducido por este., Este proyecto se ha financiado parcialmente por el proyecto DOVELAR (ref. RTI2018-096001-B-C32). Este trabajo se ha realizado con el apoyo de la Agencia Estatal de Investigacion´ espanola a trav ˜ es del sello de excelencia de Marıa de Maeztu, IRI (MDM-2016-0656). Este trabajo se ha financiado parcialmente por AGAUR of Generalitat de Catalunya a traves de la ´ subvencion del grupo Advanced Control Systems (SAC) (2017 ´ SGR 482). Este trabajo se ha realizado con el apoyo de ACCIO´ (Operational Program FEDER Catalunya 2014-2020) a traves´ de REFER project (COMRDI15-1-0036-11).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redox flow batteries: A literature review oriented to automatic control

  • Clemente, Alejandro
  • Costa Castelló, Ramon
This paper presents a literature review about the concept of redox flow batteries and its automation and monitoring. Specifically, it is focused on the presentation of all-vanadium redox flow batteries which have several benefits, compared with other existing technologies and methods for energy stored purposes. The main aspects that are reviewed in this work correspond to the characterization, modeling, supervision and control of the vanadium redox flow batteries. A research is presented where redox flow batteries are contextualized in the current energy situation, compared with other types of energy storage systems. Furthermore, a presentation about the current challenges on research, and the main existing installations is view. A discussion about the main dynamic models that have been proposed during last years, as well as the different control strategies and observers, is presented., This research was funded by the CSIC under the PTI FLOWBAT 2021 project (reference: 642 201980E101), the Spanish Ministry of Economy and Competitiveness under Projects CICYT RTI2018-094665-B-I00, DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE) and María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and by the Generalitat de Catalunya through the Project 2017 SGR 482.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust Repetitive Control of Power Inverters for Standalone Operation in DG Systems

  • Ramos, German A.
  • Isaza Ruget, Ricardo
  • Costa Castelló, Ramon
Standalone operation of an inverted-based distributed generation unit is performed in voltage control mode. In this mode, it is important that the controller provides tracking and rejection of periodic signals. Strategies like Repetitive Control (RC) are well suited in the voltage control of power inverters. However, the robustness of repetitive controllers is importantly affected by the connected loads. The reason is that the load modifies the dynamics of the system where the design of the RC relies on. Having a low bandwidth action can reduce the problem but with the cost of degrading the voltage waveform and transient response. As an alternative, an H design is proposed for the RC of voltage source inverters. In this proposal the load is directly treated as an unstructured uncertainty. With this approach, the design procedure directly maximizes the robust stability margin of the system against load variations/uncertainty. Additionally, the analysis provides some insight about the design of the inverter LC filter. Experimental results show that a remarkable Total Harmonic Distortion and good transient response are obtained for a large variety of loads., This work has been partially funded by the Spanish national project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE). This work is supported by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482). This work is partially funded by DIB Universidad Nacional de Colombia (Projects under Hermes codes 35664 and 41000).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chattering free sliding mode observer estimation of liquid water fraction in proton exchange membrane fuel cells

  • Luna, Julio
  • Costa Castelló, Ramon
  • Strahl, Stephan
The aim of this work is to deploy and experimentally validate a model-based strategy to estimate unmeasurable variables in a proton exchange membrane (PEM) fuel cell. First, a nonlinear PEM fuel cell dynamical model is implemented and calibrated using an optimisation approach that takes real measurement data as input. Then, an advanced observation approach is developed to retrieve non-measurable data from the fuel cell. Two states are estimated in this work: the fuel cell temperature and the internal liquid water fraction. To achieve this, a model-based high-order sliding mode observer (HOSM) with chattering-free capabilities is deployed. The fuel cell temperature is measured in real time to drive the estimation error to zero in a finite amount of time. Finally, the methodology is validated using experimental data stemming from a laboratory test station, comparing the the HOSM observer with and without chattering-free gain., This work has been partially funded by the Spanish national project DOVELAR (ref. RTI2018-096001- B-C32, MINECO/FEDER), the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature Control for a Proton-Exchange Membrane Fuel Cell System with Unknown Dynamic Compensations

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Na, Jing
Numerous control strategies of temperature regulation have been carried out for proton-exchange membrane fuel cell systems including a cooling fan in order to ensure operation at the desired condition and extend the lifetime of the fuel cell stack. However, most existing control strategies are developed without considering the efficiency limitation of the cooling system such that the cooling fan may be unable to eliminate the additional heat. Moreover, there are unknown modelling errors, external disturbance and noise during modelling and experiment processes for fuel cells. Due to those unknown dynamics, the conventional control strategies may fail to achieve the expectant results. To address this issue, an alternative control strategy is proposed in this paper, which consists of a composite proportional-integral (PI) controller with an unknown system dynamics estimator. First, the control strategy is developed by reducing the temperature of input air through the humidifier and simultaneously increasing the mass flow of air in order to eliminate the excess heat that a cooling fan cannot remove. Moreover, an unknown system dynamics estimator is proposed in order to compensate the effect of the unknown dynamics. The construction of the estimator is designed through finding an invariant manifold which implies the relation between known variables and the unknown manifold. The invariant manifold is derived by applying a simple low-pass filter to the system which is beneficial to avoid the requirement of the unmeasurable state derivative. Furthermore, the proposed estimator is easily merged into the proposed PI control strategy and ensures the exponential convergence of estimated errors. Besides, the estimator is further modified such that the derivative of the desired temperature is not required in the controller. Finally, numerical simulations of the PEMFC system are provided and the results illustrate the efficacy of the proposed control strategy., This work was partially funded by the Spanish National Project DOVELAR (ref. RTI2018-096001-B-C32), the AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482), and the Spanish State Research Agency through the Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656). )is work was partially funded by the Chinese Scholarship Council (CSC) under grant (201808390007). )is work was partially funded by National Natural Science Foundation of China under Grants 61922037 and 61873115.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Implementación y validación experimental del control de un sistema híbrido basado en pilas de combustible para vehículos eléctricos

  • Anderson, Jorge L.
  • Moré, Jerónimo J.
  • Puleston, Pablo Federico
  • Roda, Vicente
  • Costa Castelló, Ramon
Trabajo presentado en el XXVII Congreso Argentino de Control Automático (AADECA), celebrado de forma virtual del 28 al 30 de octubre de 2020, En este trabajo se presenta el diseño, implementación y validación experimental de un controlador por modos ´ deslizantes de segundo orden aplicado a un modulo de generación´ hibrida basado en una pila de combustible y supercapacitores. El controlador desarrollado se encuentra basado en el algoritmo Super-Twisting. Para simplificar el diseño de las acciones de ˜ control del sistema, se emplea una transformación no lineal que ´ permite independizar el diseño de las variables de deslizamiento. ˜ El sistema de control propuesto es ensayado experimentalmente en una plataforma que incorpora una pila de combustible de 1.2kW y supercapacitores de uso comercial. El modulo ´ de generación hıbrida controlado es entonces evaluado para satisfacer la demanda de potencia de un vehículo eléctrico en ´ condiciones de conducción urbana, con la presencia de múltiples ´ etapas de aceleración y desaceleración. Los resultados obtenidos ´ muestran una buena regulación de la tensión del bus común y un ´ seguimiento robusto de las referencias impuestas, aun frente a la ´ presencia de fuertes variaciones y perturbaciones de la potencia de carga, Este trabajo fue realizado bajo el apoyo de la FI-UNLP, CONICET y Agencia I+D+i. El trabajo fue parcialmente financiado por el proyecto nacional de Espana DOVELAR ref. ˜ RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE), la Agencia Nacional de Investigacion de España a través del Sello de ´ Excelencia Mar´ıa de Maeztu al IRI (MDM-2016-0656) y la Asociación Universitaria Iberoamericana de Postgrado (AUIP).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Voltage H∞ Control of a Vanadium Redox Flow Battery

  • Clemente, Alejandro
  • Andrés, Germán
  • Costa Castelló, Ramon
Redox flow batteries are one of the most relevant emerging large-scale energy storage technologies. Developing control methods for them is an open research topic; optimizing their operation is the main objective to be achieved. In this paper, a strategy that is based on regulating the output voltage is proposed. The proposed architecture reduces the number of required sensors. A rigorous design methodology that is based on linear H∞ synthesis is introduced. Finally, some simulations are presented in order to analyse the performance of the proposed control system. The results show that the obtained controller guaranties robust stability and performance, thus allowing the battery to operate over a wide range of operating conditions. Attending to the design specifications, the controlled voltage follows the reference with great accuracy and it quickly rejects the effect of sudden current changes, This research was funded by the CSIC under the PTI FLOWBAT 2021 project (reference: 642 201980E101), the Spanish Ministry of Economy and Competitiveness under Project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE), María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and by the Generalitat de Catalunya through the Project 2017 SGR 482.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An Analysis of Multi Objective Energy Scheduling in PV-BESS System under Prediction Uncertainty

  • Nair, Unnikrishnan Raveendran
  • Sandelic, Monika
  • Sangwongwanich, Ariya
  • Dragičević, Tomislav
  • Costa Castelló, Ramon
  • Blaabjerg, Frede
Energy storage systems (ESSs) are being considered to overcome issues in modern grids, caused by increasing penetration of renewable generation. Nevertheless, integration of ESS should also be supplemented with an optimal energy management framework to ensure maximum benefits from ESS. Conventional energy management of battery, used with PV system, maximises self-consumption but does not mitigate grid congestion or address battery degradation. Model predictive control (MPC) can alleviate congestion, degradation while maximizing self-consumption. As such, studies will be carried out, in this work, to highlight the improvement with MPC based energy management over conventional method using simulations of one-year system behaviour. As MPC uses forecast information in decision making, the impact of forecast uncertainties will be assessed and addressing the same through constraint tightening will be presented. It is concluded that MPC provides improvement in system behaviour over multiple performance criteria., This work is done as part of project which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska Curie grant agreement No 675318 (INCITE). This work was supported in part by the Spanish Ministry of Economy and Competitiveness under Projects CICYT RTI2018-094665-B-I00, DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE) and Mar´ıa de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and by the Generalitat de Catalunya through the Project 2017 SGR 482
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controller design for polymer electrolyte membrane fuel cell systems for automotive applications

  • Gómez Pomar, Juan Carlos
  • Serra-Prat, María
  • Husar, Attila
Continuous developments in Proton Exchange Membrane Fuel Cells (PEMFC) make them a promising technology to achieve zero emissions in multiple applications including mobility. Incremental advancements in fuel cells materials and manufacture processes make them now suitable for commercialization. However, the complex operation of fuel cell systems in automotive applications has some open issues yet. This work develops and compares three different controllers for PEMFC systems in automotive applications. All the controllers have a cascade control structure, where a generator of setpoints sends references to the subsystems controllers with the objective to maximize operational efficiency. To develop the setpoints generators, two techniques are evaluated: off-line optimization and Model Predictive Control (MPC). With the first technique, the optimal setpoints are given by a map, obtained off-line, of the optimal steady state conditions and corresponding setpoints. With the second technique, the setpoints time profiles that maximize the efficiency in an incoming time horizon are continuously computed. The proposed MPC architecture divides the fast and slow dynamics in order to reduce the computational cost. Two different MPC solutions have been implemented to deal with this fast/slow dynamics separation. After the integration of the setpoints generators with the subsystems controllers, the different control systems are tested and compared using a dynamic detailed model of the automotive system in the INN-BALANCE project running under the New European Driving Cycle., This work was supported in part by the Spanish national project DOVELAR (RTI2018-096001-B-C32, MINECO/FEDER) also in part by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), and finally in part by the Fuel Cells and Hydrogen 2 Joint Undertaking under Grant INN-BALANCE 735969. This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation program and Hydrogen Europe and N. ERGHY.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detection and Mitigation of False Data in Cooperative DC Microgrids with Unknown Constant Power Loads

  • Cecilia, Andreu
  • Sahoo, Subham
  • Dragičević, Tomislav
  • Costa Castelló, Ramon
  • Blaabjerg, Frede
The rapid development and implementation of distributed control algorithms for dc microgrids has increased the vulnerability of this type of system to false data injection attacks, being one of the most prominent types of cyber attacks. This fact has motivated the development of different false data detection and impact mitigation strategies. A common approach for the detection is based on implementing an observer that can achieve a reliable estimation of the system states. However, approaches available in the literature assume that the underlying microgrid model is linear, which is generally not the case, specially when the dc microgrid supplies nonlinear constant power loads (CPLs). Consequently, this article proposes a distributed nonlinear observer approach that can robustly detect and reconstruct the applied false data attack in the dc microgrid's current sensors and cyber links, even in the presence of local unknown CPLs. First, the system is transformed into an observable form. Second, a high-order sliding-mode observer is implemented to estimate the system states and CPL, even in the presence of false data. Finally, the estimation is used to reconstruct the attack signal. The robustness of the proposed strategy is validated through numerical simulations and in an experimental prototype under measurement noise, uncertainty, and communication delays., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Grid Congestion Mitigation and Battery Degradation Minimisation Using Model Predictive Control in PV-Based Microgrid

  • Nair, Unnikrishnan Raveendran
  • Sandelic, Monika
  • Sangwongwanich, Ariya
  • Dragičević, Tomislav
  • Costa Castelló, Ramon
  • Blaabjerg, Frede
Increasing integration of photovoltaic (PV) system in electric grids cause congestion during peak power feed-in. Battery storage in PV systems increases self-consumption, for consumer's benefit. However with conventional maximising self consumption (MSC) control for battery scheduling, the issue of grid congestion is not addressed. The batteries tend to be fully charged early in the day and peak power is still fed-in to grid. This also increases battery degradation due to increased dwell time at high state of charge (SOC) levels. To address this issue, this work uses a model predictive control (MPC) for scheduling in PV system with battery storage to achieve multiple objectives of minimising battery degradation, grid congestion, while maximising self consumption. In order to demonstrate the improvement, this work compares the performances of MPC and MSC schemes when used in battery scheduling. The improvement is quantified through performance indices like self consumption ratio, peak power reduction and battery capacity fade for one-year operation. An analysis on computation burden and maximum deterioration in MPC performance under prediction error is also carried out. It is concluded that, compared to MSC, MPC achieves similar self consumption in PV systems while also reducing grid congestion and battery degradation., This work is done as part of project which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sk lodowska Curie grant agreement No 675318 (INCITE). This work is supported by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656). This work has been partially funded by the Spanish national project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Industrial robots fuel cell based hybrid power-trains: A comparison between different configurations

  • Ramos, German A.
  • Montobbio de Pérez-Cabrero, Tomàs
  • Domènech, Carles
  • Costa Castelló, Ramon
Electric vehicles are becoming more and more popular. One of the most promising possible solutions is one where a hybrid powertrain made up of a FC (Fuel Cell) and a battery is used. This type of vehicle offers great autonomy and high recharging speed, which makes them ideal for many industrial applications. In this work, three ways to build a hybrid power-train are presented and compared. To illustrate this, the case of an industrial robot designed to move loads within a fully automated factory is used. The analysis and comparison are carried out through different objective criteria that indicate the power-train performance in different battery charge levels. The hybrid configurations are tested using real power profiles of the industrial robot. Finally, simulation results show the performance of each hybrid configuration in terms of hydrogen consumption, battery and FC degradation, and dc bus voltage and current regulation., This research was supported by the María de Maeztu Seal of Excellence to IRI (ref. MDM- 2016-0656) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear adaptive observation of the liquid water saturation in polymer electrolyte membrane fuel cells

  • Cecilia, Andreu
  • Serra-Prat, María
  • Costa Castelló, Ramon
Efficiency, reliability and lifetime of polymer electrolyte membrane fuel cells (PEMFCs) are significantly limited by inadequate water management. High-performance water active control algorithms cannot be implemented due to the absence of adequate online sensors that can measure the internal liquid water saturation. A promising technique that can be applied in this context is the state observer. However, fuel cell models present strong nonlinearities, model uncertainty, unmatched unknown parameters and sensor noise, which are major difficulties in observer design. The algorithm proposed in this work is based on a time-varying adaptive observer, that offers an estimation of the liquid water state and behaviour in the cathode catalyst layer of a PEMFC, coupled with a low-power peaking-free observer with dynamic dead-zone filtering that is used as a high-performance soft sensor. The algorithm is shown to provide an accurate estimation of the liquid water saturation and the liquid water transport parameters even in the presence of sensor noise and model inaccuracies. The results are validated through numerical simulations and in a real experimental prototype., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vanadium Redox Flow Battery State of Charge Estimation Using a Concentration Model and a Sliding Mode Observer

  • Clemente, Alejandro
  • Montiel, Manuel
  • Barreras Toledo, Félix
  • Lozano Fantoba, Antonio
  • Costa Castelló, Ramon
Vanadium redox flow batteries are very promising technologies for large-scale, inter-seasonal energy storage. Tuning models from experimental data and estimating the state of charge is an important challenge for this type of devices. This work proposes a non-linear lumped parameter concentration model to describe the state of charge that differentiates the species concentrations in the different system components and allows to compute the effect of the most relevant over-potentials. Additionally, a scheme, based on the particle swarm global optimization methodology, to tune the model taking into account real experiments is proposed and validated. Finally, a novel state of charge estimation algorithm is proposed and validated. This algorithm uses a simplified version of previous models and a sliding mode control feedback law. All developments are analytically formulated and formally validated. Additionally, they have been experimentally validated in a home-made single vanadium redox flow battery cell. Proposed methods offer a constructive methodology to improve previous results in this field., This work was supported in part by the Spanish National Research Council Consejo Superior de Investigaciones Científicas (CSIC) under Project PIE-201980E101, in part by the Spanish Ministry of Science and Innovation through the Project DOVELAR (Ministerio de Ciencias yUniversidades (MCIU)/Agencia Estatal de Investigación (AEI)/Fondo Europeo de Desarrollo Regional (FEDER), Unión Europea (UE) under Grant RTI2018-096001-B-C31 and Grant RTI2018-096001-B-C32, in part by the Laboratorio de Investigación en Fluidodinámica y Tecnologías de la Combustión (LIFTEC) Research Team through the Aragon Government under Project LMP246_18, and to the group T01_20R, in part by the Universidad Politécnica de Cataluña (UPC) Research Team through the María de Maeztu Seal of Excellence to Instituto de Robótica e Informática (IRI) under Grant MDM-2016-0656, and in part by the Generalitat de Catalunya under Project 2017 SGR482.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An adaptive power split strategy with a load disturbance compensator for fuel cell/supercapacitor powertrains

  • Xun, Qian
  • Roda, Vicente
  • Liu, Yujing
  • Huang, Xiaoliang
  • Costa Castelló, Ramon
Electric vehicles powered by fuel cell and supercapacitor hybrid power sources are of great interest. However, the power allocation between each power source is challenging and the DC bus voltage fluctuation is relatively significant in cascaded PI control schemes. This paper develops a power control strategy with an adjustable cut-off frequency, using an artificial potential field, to adaptively split the load current between the fuel cell and the supercapacitor under various load conditions. The adaptive cut-off frequency is calculated by cutting the load frequency spectrum with an allocation ratio that changes with the supercapacitor state of charge. Therefore, the relatively lower frequency portion of the load current is provided by the fuel cell and the supercapacitor handles the higher frequency portion. To enhance the control performance of the DC bus voltage regulation against the load disturbance, a load disturbance compensator is introduced to suppress the DC bus voltage fluctuation when the load variation occurs, which is implemented by a feed-forward controller that can compensate the load current variation in advance. The effectiveness of the proposed strategy is validated by extensive experiments., This work was supported by the Swedish Electromobility Center and the Swedish Energy Agency, in part by the Spanish national project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE), and in part by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Control no lineal adaptativo con identificación dispersa, Nonlinear adaptive control with sparse identification

  • Domingo-Enrich, Roger
  • Cecilia, Andreu
  • Costa Castelló, Ramon
Trabajo presentado en las XLII Jornadas de Automática, celebradas en Castellón (España), del 1 al 3 de septiembre de 2021, [EN] This work presents a controller with parameter estimation focused on non-linear, unknown and time-variant systems. The proposal consists of an on-line learning algorithm to estimate the system equations, and a controller that uses this information to stabilize the plant. Our approach is to combine a non-linear observer and a parameter estimator using sparse optimization techniques. The resulting algorithm operates in two stages: the learning stage, where unknown functions are learned on-line, and the execution stage, where the plant is controlled with pre-established objectives. The proposed algorithm can autonomously decide what is its current stage by using a learning metric. We have validated our algorithm using numerical simulation in a roto-magnet plant., [ES] En este trabajo se propone un controlador con estimación de parámetros enfocada a sistemas no lineales, desconocidos y cambiantes en el tiempo. Se presenta un algoritmo de aprendizaje en línea para estimar las ecuaciones del sistema y un controlador que usa esta información para estabilizar la planta. Para ello, se han combinado un observador no lineal y un estimador de parámetros con técnicas de optimización dispersa. En el algoritmo hay dos fases diferenciadas: la fase de aprendizaje, donde se aprenden en línea las funciones desconocidas, y la fase de ejecución, donde se controla la planta con unos objetivos preestablecidos. El algoritmo propuesto es capaz de decidir de forma autónoma en qué fase se encuentra, mediante una métrica de aprendizaje. Este algoritmo se ha validado por simulación numérica en una planta roto-magnet., Este trabajo se ha realizado con el apoyo de la Agencia Estatal de Investigación española a través del sello de excelencia de María de Maeztu, IRI (MDM-2016-0656) y a través del proyecto DOVELAR (ref. RTI2018-096001-B-C32).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Estimación del estado de carga y coeficientes de difusión en baterías de flujo redox

  • Clemente, Alejandro
  • Cecilia, Andreu
  • Costa Castelló, Ramon
Trabajo presentado en las XLII Jornadas de Automática, celebradas en Castellón (España), del 1 al 3 de septiembre de 2021, [ES] En este articulo se presenta el diseño de un observador de estado y parámetros para la estimación del estado de carga y algunos de los parámetros de difusión de una batería de flujo redox. El observador es de alta ganancia y se basa en un modelo dinámico no lineal, que utiliza un enfoque realista diferenciando entre las concentraciones totales de electrolito en las dos partes del sistema. Se muestra que el estado de carga se puede estimar mediante la medición del voltaje de celda y un observador de alta ganancia. No obstante, la precisión de la estimación se ve afectada por la incertidumbre en los coeficientes de difusión del sistema. Por esta razón, el observador se robustece mediante una estimación de parámetros adaptativos de inmersión e invariancia. Finalmente, los resultados se validan en una simulación numérica., [EN] This paper presents an observer for the estimation of the state of charge of redox flow batteries. The observer is high gain and is based on a non-linear dynamic model, which uses a realistic approach differentiating between the total electrolyte concentrations in the two parts of the system. It is shown that the state of charge can be estimated by measuring cell voltage and a high gain observer. However, the precision of the estimate is affected by the uncertainty in the diffusion coefficients of the system. For this reason, the observer is strengthened by estimating adaptive parameters of immersion and invariance. Finally, the results are validated in a numerical simulation., Este trabajo ha sido financiado por el CSIC bajo el proyecto PTI FLOWBAT 2021 (ref.642 201980E101), el Ministerio de Economía, Industria y Competitividad bajo el Proyecto DOVELAR (ref.RTI2018-096001-B-C32), y bajo la Agencia Estatatal de Investigación mediante la unidad de MARIA de Maeztu Seal of Excellence to IRI (MDM-2016-0656).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Flow controlling tuning for the voltage of a redox flow battery considering the effect of overpotentials

  • Clemente, Alejandro
  • Costa Castelló, Ramon
Trabajo presentado en el 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), celebrado en Västerås (Suecia), del 7 al 10 de septiembre de 2021, This conference paper presents a comparison between a H¿ control technique and a classical PID, applied on a redox flow battery system. The study presents a dynamic nonlinear electrochemical model that considers the effect of over-potentials losses in the computation of the voltage measurement. The controller is designed to regulate the output voltage of the battery. The H¿ controller is designed using the classical weighting function approach while the PID controller is tuned using a particle swarm optimizer. Finally, a comparison between the designed H¿ controller, and the classic PID is presented., This research was supported by the CSIC under the PTI FLOWBAT 2021 project (ref. 642 201980E101), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Combined heat and power using high-temperature proton exchange membrane fuel cells for housing facilities

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • López Diest, Guillermo
  • Batlle, Carles
Trabajo presentado en el 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA ), celebrado en Västerås (Suecia), del 7 al 10 de septiembre de 2021, Recently, new alternatives to conventional energy sources such as fossil fuels are arising due to global problems related to climate change effect and energy shortage. In this context, fuel cells and combined heat and power technologies appear as a possible solution due to their ability to provide both electrical and thermal energy more efficiently compared to traditional methods. Related to this, high-temperature proton exchange membrane fuel cells offer the possibility of implementing combined heat and power systems, and they are also considered an efficient technology that emits less greenhouse gases. In this article a model predictive control based energy management system for a specific house is presented. Simulation and control models of the system are presented, together with dimensions and energy profiles used. Finally, control objectives and the proposed control algorithm are detailed, and the results when trying to match residential heat and power demands are discussed., This work has been partially funded by the Spanish national project DOVELAR (ref. RTI2018-096001-B-C32). This work is partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

On state-estimation in weakly-observable scenarios and implicitly regularized observers

  • Cecilia, Andreu
  • Costa Castelló, Ramon
Trabajo presentado en la 60th Conference on Decision and Control (CDC), celebrada online del 14 al 17 de diciembre de 2021, This work proposes a framework to design observers for systems that present low observability. It is shown that, in these scenarios, the estimation problem becomes ill-posed, which drastically limits the performance of standard observers, specially in the presence of noise. Consequently, this paper presents a method to design an observer that optimizes some potential function to be defined by the designer. This allows to implicitly regularize the estimation and recover a well-posed problem. The proposed technique is validated in a set of weakly-observable systems and the performance is compared with a common Kalman filter-like observer., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Library-based adaptive observation through a sparsity-promoting adaptive observer

  • Cecilia, Andreu
  • Costa Castelló, Ramon
Trabajo presentado en la European Control Conference (ECC 2021), celebrada online del 29 de junio al 2 de julio de 2021, This paper proposes an adaptive observer for a class of nonlinear system with linear parametrization. The main novelty of the technique is that the regressor vector is considered to be unknown. Instead, a library of candidate non-linear functions is implemented, which transforms the original parameter vector into a new one that is characterized by being sparse. In such problem, it is shown that standard adaptive observers cannot recover the original vector due to a lack of persistence of excitation. Instead, a parameter-adaptation with an implicit l1 regularization is implemented. It is shown that this new observer can recover the parameter vector under standard assumptions of sparse signal recovery. The results are validated in a numerical simulation., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the project DOVELAR (ref. RTI2018-096001-B-C32) and by the PTI FLOWBAT 2021 project (ref. 642 201980E101)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Addressing the relative degree restriction in nonlinear adaptive observers: A high-gain observer approach

  • Cecilia, Andreu
  • Costa Castelló, Ramon
The design of adaptive observers is a common approach for the joint state and parameter-estimation problem. Nonetheless, there are still some obstacles that have to be solved to improve the design of adaptive observers and extend its implementability to a larger class of systems. First, the separation of the state-estimation and the parameter-estimation requires a relative degree one or zero between some known signal and the parameters to be estimated. Second, standard stability proofs for adaptive observers cannot be easily extended to consider the unavoidable presence of sensor noise and unmodeled system uncertainty. Consequently, on the one hand, this work proposed a methodology to relax the relative degree condition through the use of a high-gain observer that will be coupled with the adaptive observer. On the other hand, the stability and performance of the proposed observer scheme will be analyzed by the use of a strict Lyapunov function based on the Mazenc construction, which allows to have provable convergence and to study the effect of sensor noise and model uncertainty through common Lyapunov theory. Finally, the proposed approach is validated in a compartmental epidemiology model., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Literature Review of Energy Management in Combined Heat and Power Systems Based on High-Temperature Proton Exchange Membrane Fuel Cells for Residential Comfort Applications

  • Sanz i López, Víctor
  • Costa Castelló, Ramon
  • Batlle, Carles
Combined heat and power technologies represent an efficient way to ensure energy efficiency, as they promote usage of both electrical and thermal energy, something not done by most traditional energy sources, especially in residential environments. In this context, high-temperature proton exchange membrane fuel cells allow the implementation of combined heat and power systems. Additionally, in this environment, fuel cells are more efficient and less polluting than their traditional counterparts. We present a literature review of energy management in residential systems based on this type of fuel cell. In addition, we classify and detail the current state of fuel cell technologies, paying special attention to their characteristics, mathematical modelling and control, as well as combined heat and power systems and energy management strategies., This work has been partially funded by the Spanish national project DOVELAR (ref. RTI2018-096001-B-C32). This work has been partially funded by the Spanish national project MAFALDA (ref. PID2021-126001OB-C31). This work has been partially funded by AGAUR of Generalitat de Catalunya through the Advanced Control Systems (SAC) group grant (2017 SGR 482).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Experimental validation of a vanadium redox flow battery model via Particle Swarm Optimization

  • Clemente, Alejandro
  • Costa Castelló, Ramon
  • Montiel, Manuel
  • Lozano Fantoba, Antonio
  • Barreras Toledo, Félix
Trabajo presentado en el 8th Symposium on Hydrogen, Fuel Cells and Advanced Batteries, celebrado en Buenos Aires (Argentina), del 10 al 13 de julio de 2022, Among all types of energy storage systems (ESS), vanadium redox flow batteries (VRFB) stand out for their high efficiency (70-90 %), long life cycle, safety and the possibility to decouple both energy and power sizes [1]. One of the main challenges in the study and analysis of VRFB consists on the correct caracterization of its performance through mathematical models. The importance of developing mathematical models is reflected in the literature, where numerous studies widely validated and referenced can be found, such as the electrochemical model developed by M. Skyllas-Kazacos [2], who pioneered the use of vanadium in redox flow batteries. Models can be classified as static or dynamic, depending on whether the effect of time is taken into acount, and as distributed or lumped parameter models, depending on the space dimension [3]. Tools as COMSOL are used to analyze and develop distributed parameter models, to study effects of flow design, components materials or degradation mechanisms [4]. However, for control purposes, the distributed models are rarely used due to its complexity and relevant computational cost, both in resources and time. For that reason, a vast majority of works in the literature concerning VRFB control, use lumped parameters models. Most of these lumped parameters models use different hypothesis to relax the problem, facilitating its understanding and analysis. This is the case of Skyllas-Kazacos electrochemical models mentioned, where the same flow rate is considered in both semicells,same species concentration inside the cell and tanks, as well as a constant temperature to estimate the open circuit voltage (OCV) by means of the Nernst equation [5]. Therefore, it is necessary to develop an analysis in order to define which variables and parameters will be modelled, and under which assumptions. Thus, in this work, a complete model that considers the most important effects of a VRFB is presented. It can be divided into four submodels, according to the previous parameters, which are: electrochemical, voltage, thermal and hydraulic ones. This model has been developed in a Matlab-Simulink environment as a tool to analyze the performance of a VRFB in a wide range of possibilities, examining the behaviour of the species and the voltage, temperature and pressure variables, incorporating some improvements with respect to other works. For all submodels, a clear distinction is made between both sides of the system (catholyte and anolyte semicells), not only in terms of dimensions and flow rates, but also on the initial conditions., This research is part of the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094, CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

State Machine-based architecture to control PEMFC system processes in a fuel cell electric vehicle

  • Molavi, Ali
  • Husar, Attila
  • Serra-Prat, María
  • Hjortberg, Hampus
  • Nilsson, Niclas
  • Kogler, Markus
  • Sanchez Monreal, Juan
  • Eldigair, Yousif
Trabajo presentado en la European Hydrogen Energy Conference, celebrada en Madrid (España), del 18 al 20 de mayo de 2022, In this paper, a state machine-based control architecture for a Fuel Cell Electric Vehicle (FCEV) is proposed. The considered Fuel Cell System (FCS) is a complex system with multiple different states of operation. This includes the start-up, run, shut-down and idle states, which have been identified as the states of a State Machine (SM). Furthermore, the FCS incorporates several subsystems; namely, as the cathode, anode and thermal subsystems and the DC/DC converter that all have different modes of operation. In each specific state of the FCS, the subsystems should operate in a specific predefined mode. A control structure is therefore necessary to coordinate these subsystems and the stack in the different FCS operation states and the operation modes of the different subsystems. This work describes in detail the SM designed for the fuel cell system of the FCEV of the INN-BALANCE project., This work was supported in part by the Spanish national project DOVELAR (RTI2018-096001-B-C32, MINECO/FEDER) also in part by the Fuel Cells and Hydrogen 2 Joint Undertaking under Grant INN-BALANCE 735969.This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation program and Hydrogen Europe and N.ERGHY.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling and Estimation of Vanadium Redox Flow Batteries: A Review

  • Puleston, Thomas
  • Clemente, Alejandro
  • Costa Castelló, Ramon
  • Serra Alfaro, José Manuel
Redox flow batteries are one of the most promising technologies for large-scale energy storage, especially in applications based on renewable energies. In this context, considerable efforts have been made in the last few years to overcome the limitations and optimise the performance of this technology, aiming to make it commercially competitive. From the monitoring point of view, one of the biggest challenges is the estimation of the system internal states, such as the state of charge and the state of health, given the complexity of obtaining such information directly from experimental measures. Therefore, many proposals have been recently developed to get rid of such inconvenient measurements and, instead, utilise an algorithm that makes use of a mathematical model in order to rely only on easily measurable variables such as the system¿s voltage and current. This review provides a comprehensive study of the different types of dynamic models available in the literature, together with an analysis of the existing model-based estimation strategies. Finally, a discussion about the remaining challenges and possible future research lines on this field is presented., The research that gave rise to these results received support from “la Caixa” Foundation (ID 100010434. Fellowship code LCF/BQ/DI21/11860023) , the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094, CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+ project TRE2103000), the Spanish Ministry of Science and Innovation (project PID2021-126001OB-C31 funded by MCIN/AEI/10.13039/501100011033 / ERDF,EU) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fuel Cell Module Control Based on Switched/Time-Based Adaptive Super-Twisting Algorithm: Design and Experimental Validation

  • Anderson, Jorge L.
  • Moré, Jerónimo J.
  • Puleston, Pablo Federico
  • Costa Castelló, Ramon
Fuel cells (FCs) have emerged as a sound promising technology for their application in emissions-free generation systems. Their high efficiency, reliability, and clean energy make these electrochemical devices especially suitable for manifold applications such as transportation, stationary generation, and portable devices. In view of the inherent complexity of this technology, the FC control plays a fundamental role to guarantee stability and high performance against system uncertainties and disturbances. Regarding this, sliding mode control has proved to be a powerful technique for the design of robust controllers for generation systems involving FCs. However, its discontinuous control action gives rise to some undesired effects when applied to real nonideal systems, being control chattering is usually the main drawback. In this framework, the brief presents the design and experimental implementation of an FC module control via a switched/time-based adaptive super-twisting algorithm (STA). The designed algorithm is evaluated in an experimental platform of a hybrid generation system based on a commercial 1.2-kW FC. The proposed controller exhibits a low value of chattering and similar robustness features compared to traditional STA., This research was funded by ANPCyT PICT N2015-2257 Control, Electrnica e Instrumentacin: Aplicaciones en Energas Alternativas y Bioingeniera, LEICI, Fac. Ingeniera, UNLP. 20162019; CONICET PIP 112-2015- 0100496CO Electrnica de potencia y sistemas de control avanzado aplicados a fuentes de energa no convencionales, LEICI, Fac. Ingeniera, UNLP. 20162019 and UNLP Proyect 11/I217 Electrnica de potencia y sistemas de control avanzado aplicados a fuentes de energa no convencionales, LEICI, Fac. Ingeniera, UNLP. 20162019. Additionally, this work has been partially funded by the Spanish national project DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE). This work is supported by the Spanish State Research Agency through the Mara de Maeztu Seal of Excellence to IRI (MDM-2016-0656)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling and Adaptive Parameter Estimation for a Piezoelectric Cantilever Beam

  • Wang, Bin
  • Costa Castelló, Ramon
  • Na, Jing
  • Torre, Óscar de la
  • Escaler Puigoriol, Xavier
This paper proposes a new adaptive estimation approach to online estimate the model parameters of a piezoelectric cantilever beam. The beam behavior is firstly modeled using partial differential equations (PDE) considering the Kelvin-Voigt damping. To facilitate the estimation of unknown model parameters, the Galerkin's method is introduced to extract desired vibration modes by separating the time and space variables of the PDE. Then, considering two major vibration modes, the corresponding system model can be represented by a fourth-order ordinary differential equation (ODE). Finally, by using measured input and output information, a novel adaptive parameter estimation strategy is introduced to estimate the unknown parameters of the derived ODE model in real time. For the purpose of driving the parameter updating law, the estimation error is extracted by using an auxiliary variable and a time-varying gain. Consequently, the convergence of the parameter estimation error is rigorously proved based on the Lyapunov theory. Simulations and experimental results show the validity and practicability of the proposed estimation method., European Union’s Horizon 2020 Research and Inovation Program (Grant Number: 814958) 10.13039/501100001809-National Natural Science Foundation of China (Grant Number: 62273169, 61922037 and 61873115) Yunnan Fundamental Research Project (Grant Number: 202001AV070001) Project DOVELAR (Grant Number: RTI2018-096001-B-C32) 10.13039/501100004543-Chinese Scholarship Council (Grant Number: 201908530215)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Offline and online parameter estimation of nonlinear systems: Application to a solid oxide fuel cell system

  • Xing, Yashan
  • Bernadet, Lucile
  • Torrell, Marc
  • Tarancón, Albert
  • Costa Castelló, Ramon
  • Na, Jing
In this paper, an offline tuning strategy and an online parameter estimation method are exploited to calibrate the solid oxide fuel cell mathematical model. Different to existing offline tuning strategy, the developed strategy is designed in order to tune the model under various operation conditions. First, the particle swarm optimization method combined with the gradient-based search method is applied to tune unknown parameters in the state-space model and the steady-state model for each operation condition. Then, the sensitive parameters are expanded to the polynomial equations. Moreover, the reconstructed model including coefficients in the polynomial equations are determined by using the particle swarm optimization method with gradient-based search method for whole operation conditions. To show the slowly time-varying performance of a solid oxide fuel cell, an adaptive optimal learning law based on the optimization technology is proposed to online minimize a cost function with the information of the estimation error. The estimation error is extracted through several low-pass filters and simple algebraic calculation. Finally, the proposed offline tuning strategy and the developed online adaptive estimation method are verified by conducting experiments on a practical solid oxide fuel cell test bench., This work was partially funded by the Spanish national project DOVELAR (ref. RTI2018-096001-B-C32) and the MCIN/AEI/10.13039/501100011033/ERDF, EU under grant (PID2021-126001OB-C31 (MAFALDA)). This work was partially funded by National Natural Science Foundation of China under grants (61922037) and (61873115), Yunnan Fundamental Research Projects under grant (202001AV070001) and Yunnan Major Scientific and Technological Projects under grants (202102AA310042) and (202202AG050002), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Super-Twisting control with zero crossing gain adaptation. Stability analysis and validation, Control Super-Twisting con adaptación basada en cruce por cero. Análisis de estabilidad y validación

  • Anderson, Jorge L.
  • Moré, Jerónimo J.
  • Puleston, Pablo Federico
  • Roda, Vicente
  • Costa Castelló, Ramon
[EN] In the latest years, the Second Order Sliding Mode (SOSM) control have been emerged as a powerful alternative to traditional sliding mode control. Within this kind of algorithms, the SOSM Super-Twisting Algorithm (STA) allows to significantly reduce the control chattering (high frequency oscillations), through its continuous control action, while preserving conventional SMC's features of robustness and finite time convergence. However, in practical implementation, it is sometimes required to oversize the STA gains, in order to allow the system controller to deal with large, but commonly sporadic, disturbances. This situation produces an inevitable increment of control effort and, in consequence, and increment of control chattering. In this framework, in the present paper the stability analysis and validation of an adaptation mechanism for the Super-Twisting Algorithm are developed. It is based on the zero crossing gain adaptation approach developed by Pisano el al. for systems of relative degree 2. Firtsly, the proposed algorithm is validated by simulation for its application on a power converter system. Then, the controlled system is implemented on a experimental 700W power platform. The results showed an important reduction of control chattering, and similar features of robustness, in comparison with the conventional Super-Twisting Algorithm., [ES] En los ´últimos años, los algoritmos de control diseñados a partir de técnicas por Modos Deslizantes de Segundo Orden (MDSO) se han consolidado como una importante alternativa al modos deslizantes tradicional. Dentro de estos algoritmos, el control por MDSO Super-Twisting permite una importante reducción del chattering (oscilaciones de alta frecuencia), gracias a su acción de control continua, manteniendo las características de robustez y convergencia en tiempo finito deseadas. Sin embargo, en su implementación practica, en ciertas ocasiones es necesario sobredimensionar las ganancias del controlador, con el objetivo de permitir el rechazo de grandes, aunque usualmente esporádicas, perturbaciones. Esto redunda inevitablemente en un incremento en el esfuerzo del controlador y, por ende, en un incremento del chattering del sistema. De esta manera, en este trabajo se presenta el análisis de estabilidad y validación de un mecanismo de Adaptación de Ganancias para un algoritmo de control por MDSO Super-Twisting. El mismo, continua con el enfoque de adaptación basada en cruce por cero desarrollado por Pisano et al. para sistemas con grado relativo 2. El algoritmo propuesto es evaluado, en primera instancia. por simulación para el caso de aplicación de un sistema de potencia. Posteriormente, el sistema controlado es implementado y validado experimentalmente en una plataforma de 700W. Los resultados obtenidos mostraron una importante reducción del chattering y similares características de robustez, en comparación con el algoritmo Super-Twisting tradicional., Este trabajo fue realizado bajo el apoyo de la FI-UNLP,CONICET y Agencia I+D+i. El trabajo fue parcialmente fi-nanciado por el proyecto nacional de Espa ̃na DOVELAR ref.RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE), la Agencia Nacional de Investigaci ́on de Espana a trav ́es del Sello de Ex-celencia Mar ́ıa de Maeztu al IRI (MDM-2016-0656) y la Aso-ciaci ́on Universitaria Iberoamericana de Postgrado (AUIP)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

State machine-based architecture to control system processes in a hybrid fuel cell electric vehicle

  • Molavi, Ali
  • Husar, Attila
  • Hjortberg, Hampus
  • Nilsson, Niclas
  • Kogler, Markus
  • Monreal, Juan Sanchez
  • Eldigair, Yousif
  • Serra-Prat, María
This paper presents the development and implementation of a system supervisory controller in a hydrogen-based fuel cell electric vehicle. The controller's primary function is to ensure the safe control of the fuel cell system processes while facilitating coordination among various subsystems, including the balance of plant subsystems, vehicle control unit, diagnosis unit, and powertrain. The supervisory controller comprises of three primary parts: a State Machine, an Optimal Setpoint Generator, and a Power Limit Calculator. The State Machine, which serves as the central part of the supervisory controller, coordinates the fuel cell system's different operational states, including the complex processes of start-up and shutdown. To maximize the fuel cell system's efficiency and minimize the stack's degradation, the Optimal Setpoint Generator produces the subsystem's setpoints by solving an optimization problem and considering the manufacturer's requirements. The Power Limit Calculator assesses the stack's power output capability and calculates the current setpoint for the DC/DC converter. It then provides this data to the Energy Management System (EMS), which oversees the distribution of power between the fuel cell system and the batteries. The proposed fuel cell system supervisory controller is verified using the Worldwide Harmonized Light Vehicles Test Cycles (WLTC) in a real-world car. The designed control structure is implemented in a prototype hydrogen-based electric car at both PowerCell and CEVT facilities under the framework of the INN-BALANCE Horizon 2020 European project., This work was supported in part by the Spanish national project DOVELAR (RTI2018-096001-B-C32, MINECO/FEDER) also in part by the Fuel Cells and Hydrogen 2 Joint Undertaking under Grant INN-BALANCE 735969. This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation program and Hydrogen Europe and N. ERGHY., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Observador de alta ganancia con zona muerta ajustable para estimar la saturación de agua líquida en pilas de combustible tipo PEM

  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Costa Castelló, Ramon|||0000-0003-2553-5901
In the area of PEM fuel cells, water management remains one of the most challenging issues affecting PEMFC efficiency and lifetime. Liquid water active control and supervision techniques are limited by the absence of online sensors that can estimate the liquid water saturation. For this reason, this work presents the design of a state observer to estimate the cathode catalyst layer’s liquid water saturation of an open-cathode PEM fuel cell. The proposed observer is based on High-Gain techniques, and is modified with a dynamic dead-zone which reduces the observer’s noise sensibility. The results have been validated through numerical simulation and experiments. It is shown that, in the absence of noise, the proposed observer presents a similar performance than its non dead-zone equivalent. Moreover, in the presence of noise, the dead-zone significantly reduces the estimation error induced by it., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Industrial robots fuel cell based hybrid power-trains: A comparison between different configurations

  • Ramos, Germán Andres
  • Montobbio de Pérez-Cabrero, Tomàs
  • Domènech Mestres, Carles|||0000-0002-6058-0110
  • Costa Castelló, Ramon|||0000-0003-2553-5901
Electric vehicles are becoming more and more popular. One of the most promising possible solutions is one where a hybrid powertrain made up of a FC (Fuel Cell) and a battery is used. This type of vehicle offers great autonomy and high recharging speed, which makes them ideal for many industrial applications. In this work, three ways to build a hybrid power-train are presented and compared. To illustrate this, the case of an industrial robot designed to move loads within a fully automated factory is used. The analysis and comparison are carried out through different objective criteria that indicate the power-train performance in different battery charge levels. The hybrid configurations are tested using real power profiles of the industrial robot. Finally, simulation results show the performance of each hybrid configuration in terms of hydrogen consumption, battery and FC degradation, and dc bus voltage and current regulation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A model predictive control-based energy management scheme for hybrid storage system in islanded microgrids

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
Model predictive control (MPC) facilitates online optimal resource scheduling in electrical networks, thermal systems, water networks, process industry to name a few. In electrical systems, the capability of MPC can be used not only to minimise operating costs but also to improve renewable energy utilisation and energy storage system degradation. This work assesses the application of MPC for energy management in an islanded microgrid with PV generation and hybrid storage system composed of battery, supercapacitor and regenerative fuel cell. The objective is to improve the utilisation of renewable generation, the operational efficiency of the microgrid and the reduction in rate of degradation of storage systems. The improvements in energy scheduling, achieved with MPC, are highlighted through comparison with a heuristic based method, like Fuzzy inference. Simulated behaviour of an islanded microgrid with the MPC and fuzzy based energy management schemes will be studied for the same. Apart from this, the study also carries out an analysis of the computational demand resulting from the use of MPC in the energy management stage. It is concluded that, compared to heuristic methods, MPC ensures improved performance in an islanded microgrid., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska Curie under Grant 675318 (INCITE), in part by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the Spanish National Project DOVELAR (MCIU/AEI/FEDER, UE) under Grant RTI2018-096001-B-C32., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Modelling and estimation of vanadium redox flow batteries: a review

  • Puleston, Thomas Paul|||0000-0003-3251-7533
  • Clemente León, Alejandro|||0000-0001-6627-1119
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Serra, Maria|||0000-0002-9885-8093
Redox flow batteries are one of the most promising technologies for large-scale energy storage, especially in applications based on renewable energies. In this context, considerable efforts have been made in the last few years to overcome the limitations and optimise the performance of this technology, aiming to make it commercially competitive. From the monitoring point of view, one of the biggest challenges is the estimation of the system internal states, such as the state of charge and the state of health, given the complexity of obtaining such information directly from experimental measures. Therefore, many proposals have been recently developed to get rid of such inconvenient measurements and, instead, utilise an algorithm that makes use of a mathematical model in order to rely only on easily measurable variables such as the system’s voltage and current. This review provides a comprehensive study of the different types of dynamic models available in the literature, together with an analysis of the existing model-based estimation strategies. Finally, a discussion about the remaining challenges and possible future research lines on this field is presented., The research that gave rise to these results received support from “la Caixa” Foundation (ID 100010434. Fellowship code LCF/BQ/DI21/11860023) , the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094, CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+ project TRE2103000), the Spanish Ministry of Science and Innovation (project PID2021-126001OB-C31 funded by MCIN/AEI/10.13039/501100011033 / ERDF,EU) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

H8 interactive controller design for teaching purposes

  • Díaz Martínez, José Manuel
  • Dormido Bencomo, Sebastián
  • Nicolau, Bernat
  • Costa Castelló, Ramon|||0000-0003-2553-5901
H8-based controller design is one of the most powerful methodologies for controller design in the frequency domain. Unfortunately, its use requires advanced knowledge of control theory. The use of interactive tools allows to a non-specialized user to use these techniques and to learn the fundamental concepts behind the H8 theory. In this work a graphical and completely interactive tool used to introduce students in H8 control is presented., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Herramientas para la docencia de control digital en grados de ingeniería, Tools for teaching digital control in engineering degrees

  • Lerma Macaya, Eneko
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Griñó Cubero, Robert|||0000-0001-6045-4600
  • Sanchis, Carlos
En este trabajo se describen un conjunto de materiales pedagógicos que han sido desarrollados para dar soporte a la docencia del control digital. En particular, se presentan un conjunto de herramientas interactivas y el proyecto Duino-Based Learning (DBL) pensado para desarrollar prácticas experimentales de control digital utilizando Arduino. Además, se describe el contenido de un curso de control digital, que  se imparte en el marco de una titulación de ingeniería industrial, y como se utilizan las diferentes herramientas desarrolladas en su docencia., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

PEMFC state and parameter estimation through a high-gain based adaptive observer

  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Serra, Maria|||0000-0002-9885-8093
  • Costa Castelló, Ramon|||0000-0003-2553-5901
This work presents the design of an adaptive observer to estimate the cathode catalytic layer's water content of a polymer electrolyte membrane fuel cell and some of the parameters related to its water dynamics. However, in general, existing adaptive observer algorithms require a certain relative degree condition which is not satisfied in the concerned fuel cell system. This conflict is solved by modifying the adaptive observer strategy with an auxiliary signal that does satisfy the relative degree condition. This signal is estimated through a high-gain observer. The viability of the presented observer is validated through numerical simulations., This work has been partially funded by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the project DOVELAR (ref. RTI2018-096001-B-C32) and by AGAUR of Generalitat de Catalunya through theAdvanced Control Systems grant (SAC) (2017 SGR 482, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Grid congestion mitigation and battery degradation minimisation using model predictive control in PV-based microgrid

  • Raveendran Nair, Unnikrishnan
  • Sandelic, Monika
  • Sangwongwanich, Ariya
  • Dragicevic, Tomislav
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Blaabjerg, Frede
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Increasing integration of photovoltaic (PV) system in electric grids cause congestion during peak power feed-in. Battery storage in PV systems increases self-consumption, for consumer's benefit. However with conventional maximising self consumption (MSC) control for battery scheduling, the issue of grid congestion is not addressed. The batteries tend to be fully charged early in the day and peak power is still fed-in to grid. This also increases battery degradation due to increased dwell time at high state of charge (SOC) levels. To address this issue, this work uses a model predictive control (MPC) for scheduling in PV system with battery storage to achieve multiple objectives of minimising battery degradation, grid congestion, while maximising self consumption. In order to demonstrate the improvement, this work compares the performances of MPC and MSC schemes when used in battery scheduling. The improvement is quantified through performance indices like self consumption ratio, peak power reduction and battery capacity fade for one-year operation. An analysis on computation burden and maximum deterioration in MPC performance under prediction error is also carried out. It is concluded that, compared to MSC, MPC achieves similar self consumption in PV systems while also reducing grid congestion and battery degradation., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Detection and mitigation of false data in cooperative dc microgrids with unknown constant power loads

  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Sahoo, Subham
  • Dragicevic, Tomislav
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Blaabjerg, Frede
© 2021 IEEE. Personal use is permitted, but republication/redistribution requires IEEE permission. See https://www.ieee.org/publications/rights/index.html for more information., The rapid development and implementation of distributed control algorithms for DC microgrids has increased the vulnerability of this type of system to false data injection attacks, being one of the most prominent types of cyber attacks. This fact has motivated the development of different false data detection and impact mitigation strategies. A common approach for the detection is based on implementing an observer that can achieve a reliable estimation of the system states. However, approaches available in the literature assume that the underlying microgrid model is linear, which is generally not the case, specially when the DC microgrid supplies nonlinear constant power loads (CPLs). Consequently, this work proposes a distributed non-linear observer approach that can robustly detect and reconstruct the applied false data attack in the DC microgrid's current sensors and cyber-links, even in the presence of local unknown CPLs. First, the system is transformed into an observable form. Second, a high-order sliding-mode observer is implemented to estimate the system states and CPL, even in the presence of false data. Finally, the estimation is used to reconstruct the attack signal. The robustness of the proposed strategy is validated through numerical simulations and in an experimental prototype under measurement noise, uncertainty and communication delays., This work was supported in part by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656 and in part by the project DOVELAR under Grant RTI2018-096001-B-C32., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Flow controlling tuning for the voltage of a redox flow battery considering the effect of overpotentials

  • Clemente Escuin, Antonio
  • Costa Castelló, Ramon|||0000-0003-2553-5901
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This conference paper presents a comparison between a H8 control technique and a classical PID, applied on a redox flow battery system. The study presents a dynamic nonlinear electrochemical model that considers the effect of over-potentials losses in the computation of the voltage measurement. The controller is designed to regulate the output voltage of the battery. The H8 controller is designed using the classical weighting function approach while the PID controller is tuned using a particle swarm optimizer. Finally, a comparison between the designed H8 controller, and the classic PID is presented., This research was supported by the CSIC under the PTI FLOWBAT 2021 project (ref. 642 201980E101), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Chattering free sliding mode observer estimation of liquid water fraction in proton exchange membrane fuel cells

  • Luna Pacho, Julio
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Strahl, Stephan
The aim of this work is to deploy and experimentally validate a model-based strategy to estimate unmeasurable variables in a proton exchange membrane (PEM) fuel cell. First, a nonlinear PEM fuel cell dynamical model is implemented and calibrated using an optimisation approach that takes real measurement data as input. Then, an advanced observation approach is developed to retrieve non-measurable data from the fuel cell. Two states are estimated in this work: the fuel cell temperature and the internal liquid water fraction. To achieve this, a model-based high-order sliding mode observer (HOSM) with chattering-free capabilities is deployed. The fuel cell temperature is measured in real time to drive the estimation error to zero in a finite amount of time. Finally, the methodology is validated using experimental data stemming from a laboratory test station, comparing the the HOSM observer with and without chattering-free gain., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

An interactive teaching/learning approach to the design of robust linear control systems using the closed-loop shaping methodology

  • Dormido Bencomo, Sebastián
  • Díaz Martínez, José Manuel
  • Costa Castelló, Ramon|||0000-0003-2553-5901
Usually the controller is designed working on the open-loop transfer function. However, it is also possible to design the controller working on the closed-loop transfer functions. The closed-loop shaping methodology offers a straightforward framework which allows designers and students to focus on the required specification fulfillment and dealing with inherent linear systems limitations without complex computations or using difficult algorithms. This article summarizes the basic ideas of the manual closed-loop shaping methodology, and its application to the design of robust controllers for uncertainty linear systems. An interactive software tool for learning/teaching this methodology is also presented., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Control super-twisting con adaptación basada en cruce por cero: análisis de estabilidad y validación

  • Anderson, Jorge
  • Moré, Jerónimo José
  • Puleston, Pablo Federico
  • Roda Serrat, Vicente
  • Costa Castelló, Ramon|||0000-0003-2553-5901
En los últimos años, los algoritmos de control diseñados a partir de técnicas por Modos Deslizantes de Segundo Orden (MDSO) se han consolidado como una importante alternativa al modos deslizantes tradicional. Dentro de estos algoritmos, el control por MDSO Super-Twisting permite una importante reducción del chattering (oscilaciones de alta frecuencia), gracias a su acción de control continua, manteniendo las características de robustez y convergencia en tiempo finito deseadas. Sin embargo, en su implementación práctica, en ciertas ocasiones es necesario sobredimensionar las ganancias del controlador, con el objetivo de permitir el rechazo de grandes, aunque usualmente esporádicas, perturbaciones. Esto redunda inevitablemente en un incremento en el esfuerzo del controlador y, por ende, en un incremento del chattering del sistema. De esta manera, en este trabajo se presenta el análisis de estabilidad y validación de un mecanismo de Adaptación de Ganancias para un algoritmo de control por MDSO Super-Twisting. El mismo, continúa con el enfoque de adaptación basada en cruce por cero desarrollado por Pisano et al. para sistemas con grado relativo 2. El algoritmo propuesto es evaluado, en primera instancia. por simulación para el caso de aplicación de un sistema de potencia. Posteriormente, el sistema controlado es implementado y validado experimentalmente en una plataforma de 700W. Los resultados obtenidos mostraron una importante reducción del chattering y similares características de robustez, en comparación con el algoritmo Super-Twisting tradicional., Este trabajo fue realizado bajo el apoyo de la FI-UNLP, CONICET y Agencia I+D+i. El trabajo fue parcialmente financiado por el proyecto nacional de España DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE), la Agencia Nacional de Investigación de España a través del Sello de Excelencia María de Maeztu al IRI (MDM-2016-0656) y la Asociación Universitaria Iberoamericana de Postgrado (AUIP)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Library-based adaptive observation through a sparsity-promoting adaptive observer

  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Costa Castelló, Ramon|||0000-0003-2553-5901
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper proposes an adaptive observer for a class of nonlinear system with linear parametrization. The main novelty of the technique is that the regressor vector is considered to be unknown. Instead, a library of candidate non-linear functions is implemented, which transforms the original parameter vector into a new one that is characterized by being sparse. In such problem, it is shown that standard adaptive observers cannot recover the original vector due to a lack of persistence of excitation. Instead, a parameter-adaptation with an implicit l1 regularization is implemented. It is shown that this new observer can recover the parameter vector under standard assumptions of sparse signal recovery. The results are validated in a numerical simulation., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the project DOVELAR (ref. RTI2018-096001-B-C32) and by the PTI FLOWBAT 2021 project (ref. 642 201980E101)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Nonlinear adaptive observation of the liquid water saturation in polymer electrolyte membrane fuel cells

  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Serra, Maria|||0000-0002-9885-8093
  • Costa Castelló, Ramon|||0000-0003-2553-5901
© 2021. Elsevier, Efficiency, reliability and lifetime of polymer electrolyte membrane fuel cells (PEMFCs) are significantly limited by inadequate water management. High-performance water active control algorithms cannot be implemented due to the absence of adequate online sensors that can measure the internal liquid water saturation. A promising technique that can be applied in this context is the state observer. However, fuel cell models present strong nonlinearities, model uncertainty, unmatched unknown parameters and sensor noise, which are major difficulties in observer design. The algorithm proposed in this work is based on a time-varying adaptive observer, that offers an estimation of the liquid water state and behaviour in the cathode catalyst layer of a PEMFC, coupled with a low-power peaking-free observer with dynamic dead-zone filtering that is used as a high-performance soft sensor. The algorithm is shown to provide an accurate estimation of the liquid water saturation and the liquid water transport parameters even in the presence of sensor noise and model inaccuracies. The results are validated through numerical simulations and in a real experimental prototype., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Implementación y validación experimental del control de un sistema híbrido basado en pilas de combustible para vehículos eléctricos

  • Anderson, Jorge
  • Moré,, J.J.
  • Puleston, Pablo Federico
  • Roda Serrat, Vicente
  • Costa Castelló, Ramon|||0000-0003-2553-5901
En este trabajo se presenta el diseño, implementación y validación experimental de un controlador por modos deslizantes de segundo orden aplicado a un módulo de generación híbrida basado en una pila de combustible y supercapacitores. El controlador desarrollado se encuentra basado en el algoritmo Super-Twisting. Para simplificar el diseño de las acciones de control del sistema, se emplea una transformación no lineal que permite independizar el diseño de las variables de deslizamiento. El sistema de control propuesto es ensayado experimentalmente en una plataforma que incorpora una pila de combustible de 1.2kW y supercapacitores de uso comercial. El módulo de generación híbrida controlado es entonces evaluado para satisfacer la demanda de potencia de un vehículo eléctrico en condiciones de conducción urbana, con la presencia de múltiples etapas de aceleración y desaceleración. Los resultados obtenidos muestran una buena regulación de la tensión del bus común y un seguimiento robusto de las referencias impuestas, aún frente a la presencia de fuertes variaciones y perturbaciones de la potencia de carga., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Stochastic neural radiance fields: quantifying uncertainty in implicit 3D representations

  • Shen, Jianxiong
  • Ruiz Ovejero, Adrià
  • Agudo Martínez, Antonio|||0000-0001-6845-4998
  • Moreno-Noguer, Francesc
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Neural Radiance Fields (NeRF) has become a popular framework for learning implicit 3D representations and addressing different tasks such as novel-view synthesis or depth-map estimation. However, in downstream applications where decisions need to be made based on automatic predictions, it is critical to leverage the confidence associated with the model estimations. Whereas uncertainty quantification is a long-standing problem in Machine Learning, it has been largely overlooked in the recent NeRF literature. In this context, we propose Stochastic Neural Radiance Fields (S-NeRF), a generalization of standard NeRF that learns a probability distribution over all the possible radiance fields modeling the scene. This distribution allows to quantify the uncertainty associated with the scene information provided by the model. S-NeRF optimization is posed as a Bayesian learning problem that is efficiently addressed using the Variational Inference framework. Exhaustive experiments over benchmark datasets demonstrate that S-NeRF is able to provide more reliable predictions and confidence values than generic approaches previously proposed for uncertainty estimation in other domains., This work is supported partly by the Chinese Scholarship Council (CSC) under grant (201906120031), by the Spanish government under project MoHuCo PID2020- 120049RB-I00, the ERA-Net Chistera project IPALM PCI2019-103386 and María de Maeztu Seal of Excellence MDM-2016-0656. Adria Ruiz acknowledges financial support from MICINN through the program Juan de la Cierva., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

PEMFC state and parameter estimation through a high-gain based adaptive observer

  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Serra, Maria|||0000-0002-9885-8093
  • Costa Castelló, Ramon|||0000-0003-2553-5901
This work presents the design of an adaptive observer to estimate the cathode catalytic layer's water content of a polymer electrolyte membrane fuel cell and some of the parameters related to its water dynamics. However, in general, existing adaptive observer algorithms require a certain relative degree condition which is not satised in the concerned fuel cell system. This conflicict is solved by modifying the adaptive observer strategy with an auxiliary signal that does satisfy the relative degree condition. This signal is estimated through a high-gain observer. The viability of the presented observer is validated through numerical simulations., This work has been partially funded by the Spanish State ResearchAgency through the Mar ́ıa de Maeztu Seal of Excellence to IRI(MDM-2016-0656), by the project DOVELAR (ref. RTI2018-096001-B-C32) and by AGAUR of Generalitat de Catalunya through theAdvanced Control Systems grant (SAC) (2017 SGR 482, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Parameter fitting of a reversible solid oxide stack model

  • Lleonsí Carrillo, Ignasi
  • Bernadet, Lucile
  • Torrell, Marc
  • Serra, Maria|||0000-0002-9885-8093
Ponència presentada a la European Hydrogen Energy Conference, celebrada a Madrid (España), del 18 al 20 de maig de 2022, In this work, the fitting of five parameters of a Reversible Solid Oxide (RSO) stack model is done based on data obtained at different conditions of operation. Two types of experimental curves are used: polarization curves and sweeps. The system suffered a degradation and the analysis has permitted to study which one of the parameters was affected, indicating which part of the stack was damaged., Project funded partially by Ajuntament de Barcelona, in the framework of Pla Barcelona Ciència and partially by the Spanish State Research Agency through the project DOVELAR (ref. RTI2018-096001-B-C32)
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Temperaturecontrol for a proton-exchange membrane fuel cell system with unknown dynamic compensations

  • Xing, Yashan
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Na, Jing
Numerous control strategies of temperature regulation have been carried out for proton-exchange membrane fuel cell systems including a cooling fan in order to ensure operation at the desired condition and extend the lifetime of the fuel cell stack. However, most existing control strategies are developed without considering the efficiency limitation of the cooling system such that the cooling fan may be unable to eliminate the additional heat. Moreover, there are unknown modelling errors, external disturbance and noise during modelling and experiment processes for fuel cells. Due to those unknown dynamics, the conventional control strategies may fail to achieve the expectant results. To address this issue, an alternative control strategy is proposed in this paper, which consists of a composite proportional-integral (PI) controller with an unknown system dynamics estimator. First, the control strategy is developed by reducing the temperature of input air through the humidifier and simultaneously increasing the mass flow of air in order to eliminate the excess heat that a cooling fan cannot remove. Moreover, an unknown system dynamics estimator is proposed in order to compensate the effect of the unknown dynamics. The construction of the estimator is designed through finding an invariant manifold which implies the relation between known variables and the unknown manifold. The invariant manifold is derived by applying a simple low-pass filter to the system which is beneficial to avoid the requirement of the unmeasurable state derivative. Furthermore, the proposed estimator is easily merged into the proposed PI control strategy and ensures the exponential convergence of estimated errors. Besides, the estimator is further modified such that the derivative of the desired temperature is not required in the controller. Finally, numerical simulations of the PEMFC system are provided and the results illustrate the efficacy of the proposed control strategy., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

SOC and diffusion rate estimation in redox flow batteries: An I&I-based high-gain observer approach

  • Clemente Escuin, Antonio
  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Costa Castelló, Ramon|||0000-0003-2553-5901
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents an adaptive non-linear observer for the state of charge estimation in vanadium redox flow batteries. The study is based directly on the use of non-linear equations that describe the evolution of the species concentration inside the system, and a nonlinear cell voltage expression that takes into account the effect of overpotentials. Moreover, a more realistic approach is used which does not consider that the electrolyte concentration is the same in the catholyte and anolyte sides of the system. It is shown that the state of charge can be estimated through the measurement of the output voltage and a high-gain observer. Nonetheless, the accuracy of the estimation is affected by uncertainty in the system diffusion rates. For this reason, the observer is robustified by means of an immersive and invariance adaptive parameter estimation. The results are validated in a numerical simulation., This research was funded by the CSIC under the PTI FLOWBAT 2021 project (ref. 642 201980E101), the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32), and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Control no lineal adaptativo con identificación dispersa

  • Domingo-Enrich, Roger
  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Costa Castelló, Ramon|||0000-0003-2553-5901
This work presents a controller with parameter estimation focused on non-linear, unknown and time-variant systems. The proposal consists of an on-line learning algorithm to estimate the system equations, and a controller that uses this information to stabilize the plant. Our approach is to combine a non-linear observer and a parameter estimator using sparse optimization techniques. The resulting algorithm operates in two stages: the learning stage, where unknown functions are learned on-line, and the execution stage, where the plant is controlled with pre-established objectives. The proposed algorithm can autonomously decide what is its current stage by using a learning metric. We have validated our algorithm using numerical simulation in a roto-magnet plant., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

State machine-based architecture to control system processes in a hybrid fuel cell electric vehicle

  • Molavi, Ali|||0000-0002-1155-2375
  • Husar, Attila Peter|||0000-0001-8503-3837
  • Hjortberg, Hampus
  • Nilsson, Niclas
  • Kogler, Markus
  • Monreal, Juan Sanchez
  • Eldigair, Yousif
  • Serra, Maria|||0000-0002-9885-8093
© 2023 The Author(s). Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)., This paper presents the development and implementation of a system supervisory controller in a hydrogen-based fuel cell electric vehicle. The controller's primary function is to ensure the safe control of the fuel cell system processes while facilitating coordination among various subsystems, including the balance of plant subsystems, vehicle control unit, diagnosis unit, and powertrain. The supervisory controller comprises of three primary parts: a State Machine, an Optimal Setpoint Generator, and a Power Limit Calculator. The State Machine, which serves as the central part of the supervisory controller, coordinates the fuel cell system's different operational states, including the complex processes of start-up and shutdown. To maximize the fuel cell system's efficiency and minimize the stack's degradation, the Optimal Setpoint Generator produces the subsystem's setpoints by solving an optimization problem and considering the manufacturer's requirements. The Power Limit Calculator assesses the stack's power output capability and calculates the current setpoint for the DC/DC converter. It then provides this data to the Energy Management System (EMS), which oversees the distribution of power between the fuel cell system and the batteries. The proposed fuel cell system supervisory controller is verified using the Worldwide Harmonized Light Vehicles Test Cycles (WLTC) in a real-world car. The designed control structure is implemented in a prototype hydrogen-based electric car at both PowerCell and CEVT facilities under the framework of the INN-BALANCE Horizon 2020 European project., This work was supported in part by the Spanish national project DOVELAR (RTI2018-096001-B-C32, MINECO/FEDER) also in part by the Fuel Cells and Hydrogen 2 Joint Undertaking under Grant INN-BALANCE 735969. This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation program and Hydrogen Europe and N. ERGHY, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Combined heat and power using high-temperature proton exchange membrane fuel cells for housing facilities

  • Sanz i López, Víctor
  • Lopez Diest, Guillermo
  • Costa Castelló, Ramon|||0000-0003-2553-5901
  • Batlle Arnau, Carles|||0000-0002-6088-6187
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Recently, new alternatives to conventional energy sources such as fossil fuels are arising due to global problems related to climate change effect and energy shortage. In this context, fuel cells and combined heat and power technologies appear as a possible solution due to their ability to provide both electrical and thermal energy more efficiently compared to traditional methods. Related to this, high-temperature proton exchange membrane fuel cells offer the possibility of implementing combined heat and power systems, and they are also considered an efficient technology that emits less greenhouse gases. In this article a model predictive control based energy management system for a specific house is presented. Simulation and control models of the system are presented, together with dimensions and energy profiles used. Finally, control objectives and the proposed control algorithm are detailed, and the results when trying to match residential heat and power demands are discussed., Peer Reviewed, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

On state-estimation in weakly-observable scenarios and implicitly regularized observers

  • Cecilia Piñol, Andreu|||0000-0002-5579-4157
  • Costa Castelló, Ramon|||0000-0003-2553-5901
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This work proposes a framework to design observers for systems that present low observability. It is shown that, in these scenarios, the estimation problem becomes ill-posed, which drastically limits the performance of standard observers, specially in the presence of noise. Consequently, this paper presents a method to design an observer that optimizes some potential function to be defined by the designer. This allows to implicitly regularize the estimation and recover a well-posed problem. The proposed technique is validated in a set of weakly-observable systems and the performance is compared with a common Kalman filter-like observer., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32)., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Controller design for polymer electrolyte membrane fuel cell systems for automotive applications

  • Gómez Pomar, Juan Carlos
  • Serra, Maria|||0000-0002-9885-8093
  • Husar, Attila Peter|||0000-0001-8503-3837
This work develops and compares three different controllers for PEMFC systems in automotive applications. All the controllers have a cascade control structure, where a generator of setpoints sends references to the subsystems controllers with the objective to maximize operational efficiency. To develop the setpoints generators, two techniques are evaluated: off-line optimization and Model Predictive Control (MPC). With the first technique, the optimal setpoints are given by a map, obtained off-line, of the optimal steady state conditions and corresponding setpoints. With the second technique, the setpoints time profiles that maximize the efficiency in an incoming time horizon are continuously computed. The proposed MPC architecture divides the fast and slow dynamics in order to reduce the computational cost. Two different MPC solutions have been implemented to deal with this fast/slow dynamics separation. After the integration of the setpoints generators with the subsystems controllers, the different control systems are tested and compared using a dynamic detailed model of the automotive system in the INN-BALANCE project running under the New European Driving Cycle., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Controller design for polymer electrolyte membrane fuel cell systems for automotive applications

  • Gómez Pomar, Juan Carlos
  • Serra, Maria
  • Husar, Attila Peter
This work develops and compares three different controllers for PEMFC systems in automotive applications. All the controllers have a cascade control structure, where a generator of setpoints sends references to the subsystems controllers with the objective to maximize operational efficiency. To develop the setpoints generators, two techniques are evaluated: off-line optimization and Model Predictive Control (MPC). With the first technique, the optimal setpoints are given by a map, obtained off-line, of the optimal steady state conditions and corresponding setpoints. With the second technique, the setpoints time profiles that maximize the efficiency in an incoming time horizon are continuously computed. The proposed MPC architecture divides the fast and slow dynamics in order to reduce the computational cost. Two different MPC solutions have been implemented to deal with this fast/slow dynamics separation. After the integration of the setpoints generators with the subsystems controllers, the different control systems are tested and compared using a dynamic detailed model of the automotive system in the INN-BALANCE project running under the New European Driving Cycle., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Library-based adaptive observation through a sparsity-promoting adaptive observer

  • Cecilia Piñol, Andreu
  • Costa Castelló, Ramon
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper proposes an adaptive observer for a class of nonlinear system with linear parametrization. The main novelty of the technique is that the regressor vector is considered to be unknown. Instead, a library of candidate non-linear functions is implemented, which transforms the original parameter vector into a new one that is characterized by being sparse. In such problem, it is shown that standard adaptive observers cannot recover the original vector due to a lack of persistence of excitation. Instead, a parameter-adaptation with an implicit l1 regularization is implemented. It is shown that this new observer can recover the parameter vector under standard assumptions of sparse signal recovery. The results are validated in a numerical simulation., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the project DOVELAR (ref. RTI2018-096001-B-C32) and by the PTI FLOWBAT 2021 project (ref. 642 201980E101)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Nonlinear adaptive observation of the liquid water saturation in polymer electrolyte membrane fuel cells

  • Cecilia Piñol, Andreu
  • Serra, Maria
  • Costa Castelló, Ramon
© 2021. Elsevier, Efficiency, reliability and lifetime of polymer electrolyte membrane fuel cells (PEMFCs) are significantly limited by inadequate water management. High-performance water active control algorithms cannot be implemented due to the absence of adequate online sensors that can measure the internal liquid water saturation. A promising technique that can be applied in this context is the state observer. However, fuel cell models present strong nonlinearities, model uncertainty, unmatched unknown parameters and sensor noise, which are major difficulties in observer design. The algorithm proposed in this work is based on a time-varying adaptive observer, that offers an estimation of the liquid water state and behaviour in the cathode catalyst layer of a PEMFC, coupled with a low-power peaking-free observer with dynamic dead-zone filtering that is used as a high-performance soft sensor. The algorithm is shown to provide an accurate estimation of the liquid water saturation and the liquid water transport parameters even in the presence of sensor noise and model inaccuracies. The results are validated through numerical simulations and in a real experimental prototype., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Flow controlling tuning for the voltage of a redox flow battery considering the effect of overpotentials

  • Clemente Escuin, Antonio
  • Costa Castelló, Ramon
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This conference paper presents a comparison between a H8 control technique and a classical PID, applied on a redox flow battery system. The study presents a dynamic nonlinear electrochemical model that considers the effect of over-potentials losses in the computation of the voltage measurement. The controller is designed to regulate the output voltage of the battery. The H8 controller is designed using the classical weighting function approach while the PID controller is tuned using a particle swarm optimizer. Finally, a comparison between the designed H8 controller, and the classic PID is presented., This research was supported by the CSIC under the PTI FLOWBAT 2021 project (ref. 642 201980E101), the María de Maeztu Seal of Excellence to IRI (ref. MDM-2016-0656) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32), Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Industrial robots fuel cell based hybrid power-trains: A comparison between different configurations

  • Ramos, Germán Andres
  • Montobbio de Pérez-Cabrero, Tomàs
  • Domènech Mestres, Carles
  • Costa Castelló, Ramon
Electric vehicles are becoming more and more popular. One of the most promising possible solutions is one where a hybrid powertrain made up of a FC (Fuel Cell) and a battery is used. This type of vehicle offers great autonomy and high recharging speed, which makes them ideal for many industrial applications. In this work, three ways to build a hybrid power-train are presented and compared. To illustrate this, the case of an industrial robot designed to move loads within a fully automated factory is used. The analysis and comparison are carried out through different objective criteria that indicate the power-train performance in different battery charge levels. The hybrid configurations are tested using real power profiles of the industrial robot. Finally, simulation results show the performance of each hybrid configuration in terms of hydrogen consumption, battery and FC degradation, and dc bus voltage and current regulation., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Chattering free sliding mode observer estimation of liquid water fraction in proton exchange membrane fuel cells

  • Luna Pacho, Julio
  • Costa Castelló, Ramon
  • Strahl, Stephan
The aim of this work is to deploy and experimentally validate a model-based strategy to estimate unmeasurable variables in a proton exchange membrane (PEM) fuel cell. First, a nonlinear PEM fuel cell dynamical model is implemented and calibrated using an optimisation approach that takes real measurement data as input. Then, an advanced observation approach is developed to retrieve non-measurable data from the fuel cell. Two states are estimated in this work: the fuel cell temperature and the internal liquid water fraction. To achieve this, a model-based high-order sliding mode observer (HOSM) with chattering-free capabilities is deployed. The fuel cell temperature is measured in real time to drive the estimation error to zero in a finite amount of time. Finally, the methodology is validated using experimental data stemming from a laboratory test station, comparing the the HOSM observer with and without chattering-free gain., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Implementación y validación experimental del control de un sistema híbrido basado en pilas de combustible para vehículos eléctricos

  • Anderson, Jorge
  • Moré,, J.J.
  • Puleston, Pablo Federico
  • Roda Serrat, Vicente
  • Costa Castelló, Ramon
En este trabajo se presenta el diseño, implementación y validación experimental de un controlador por modos deslizantes de segundo orden aplicado a un módulo de generación híbrida basado en una pila de combustible y supercapacitores. El controlador desarrollado se encuentra basado en el algoritmo Super-Twisting. Para simplificar el diseño de las acciones de control del sistema, se emplea una transformación no lineal que permite independizar el diseño de las variables de deslizamiento. El sistema de control propuesto es ensayado experimentalmente en una plataforma que incorpora una pila de combustible de 1.2kW y supercapacitores de uso comercial. El módulo de generación híbrida controlado es entonces evaluado para satisfacer la demanda de potencia de un vehículo eléctrico en condiciones de conducción urbana, con la presencia de múltiples etapas de aceleración y desaceleración. Los resultados obtenidos muestran una buena regulación de la tensión del bus común y un seguimiento robusto de las referencias impuestas, aún frente a la presencia de fuertes variaciones y perturbaciones de la potencia de carga., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Stochastic neural radiance fields: quantifying uncertainty in implicit 3D representations

  • Shen, Jianxiong
  • Ruiz Ovejero, Adrià
  • Agudo Martínez, Antonio
  • Moreno-Noguer, Francesc
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Neural Radiance Fields (NeRF) has become a popular framework for learning implicit 3D representations and addressing different tasks such as novel-view synthesis or depth-map estimation. However, in downstream applications where decisions need to be made based on automatic predictions, it is critical to leverage the confidence associated with the model estimations. Whereas uncertainty quantification is a long-standing problem in Machine Learning, it has been largely overlooked in the recent NeRF literature. In this context, we propose Stochastic Neural Radiance Fields (S-NeRF), a generalization of standard NeRF that learns a probability distribution over all the possible radiance fields modeling the scene. This distribution allows to quantify the uncertainty associated with the scene information provided by the model. S-NeRF optimization is posed as a Bayesian learning problem that is efficiently addressed using the Variational Inference framework. Exhaustive experiments over benchmark datasets demonstrate that S-NeRF is able to provide more reliable predictions and confidence values than generic approaches previously proposed for uncertainty estimation in other domains., This work is supported partly by the Chinese Scholarship Council (CSC) under grant (201906120031), by the Spanish government under project MoHuCo PID2020- 120049RB-I00, the ERA-Net Chistera project IPALM PCI2019-103386 and María de Maeztu Seal of Excellence MDM-2016-0656. Adria Ruiz acknowledges financial support from MICINN through the program Juan de la Cierva., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

PEMFC state and parameter estimation through a high-gain based adaptive observer

  • Cecilia Piñol, Andreu
  • Serra, Maria
  • Costa Castelló, Ramon
This work presents the design of an adaptive observer to estimate the cathode catalytic layer's water content of a polymer electrolyte membrane fuel cell and some of the parameters related to its water dynamics. However, in general, existing adaptive observer algorithms require a certain relative degree condition which is not satised in the concerned fuel cell system. This conflicict is solved by modifying the adaptive observer strategy with an auxiliary signal that does satisfy the relative degree condition. This signal is estimated through a high-gain observer. The viability of the presented observer is validated through numerical simulations., This work has been partially funded by the Spanish State ResearchAgency through the Mar ́ıa de Maeztu Seal of Excellence to IRI(MDM-2016-0656), by the project DOVELAR (ref. RTI2018-096001-B-C32) and by AGAUR of Generalitat de Catalunya through theAdvanced Control Systems grant (SAC) (2017 SGR 482, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

SOC and diffusion rate estimation in redox flow batteries: An I&I-based high-gain observer approach

  • Clemente Escuin, Antonio
  • Cecilia Piñol, Andreu
  • Costa Castelló, Ramon
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This paper presents an adaptive non-linear observer for the state of charge estimation in vanadium redox flow batteries. The study is based directly on the use of non-linear equations that describe the evolution of the species concentration inside the system, and a nonlinear cell voltage expression that takes into account the effect of overpotentials. Moreover, a more realistic approach is used which does not consider that the electrolyte concentration is the same in the catholyte and anolyte sides of the system. It is shown that the state of charge can be estimated through the measurement of the output voltage and a high-gain observer. Nonetheless, the accuracy of the estimation is affected by uncertainty in the system diffusion rates. For this reason, the observer is robustified by means of an immersive and invariance adaptive parameter estimation. The results are validated in a numerical simulation., This research was funded by the CSIC under the PTI FLOWBAT 2021 project (ref. 642 201980E101), the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32), and by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Grid congestion mitigation and battery degradation minimisation using model predictive control in PV-based microgrid

  • Raveendran Nair, Unnikrishnan
  • Sandelic, Monika
  • Sangwongwanich, Ariya
  • Dragicevic, Tomislav
  • Costa Castelló, Ramon
  • Blaabjerg, Frede
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, Increasing integration of photovoltaic (PV) system in electric grids cause congestion during peak power feed-in. Battery storage in PV systems increases self-consumption, for consumer's benefit. However with conventional maximising self consumption (MSC) control for battery scheduling, the issue of grid congestion is not addressed. The batteries tend to be fully charged early in the day and peak power is still fed-in to grid. This also increases battery degradation due to increased dwell time at high state of charge (SOC) levels. To address this issue, this work uses a model predictive control (MPC) for scheduling in PV system with battery storage to achieve multiple objectives of minimising battery degradation, grid congestion, while maximising self consumption. In order to demonstrate the improvement, this work compares the performances of MPC and MSC schemes when used in battery scheduling. The improvement is quantified through performance indices like self consumption ratio, peak power reduction and battery capacity fade for one-year operation. An analysis on computation burden and maximum deterioration in MPC performance under prediction error is also carried out. It is concluded that, compared to MSC, MPC achieves similar self consumption in PV systems while also reducing grid congestion and battery degradation., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Control no lineal adaptativo con identificación dispersa

  • Domingo-Enrich, Roger
  • Cecilia Piñol, Andreu
  • Costa Castelló, Ramon
This work presents a controller with parameter estimation focused on non-linear, unknown and time-variant systems. The proposal consists of an on-line learning algorithm to estimate the system equations, and a controller that uses this information to stabilize the plant. Our approach is to combine a non-linear observer and a parameter estimator using sparse optimization techniques. The resulting algorithm operates in two stages: the learning stage, where unknown functions are learned on-line, and the execution stage, where the plant is controlled with pre-established objectives. The proposed algorithm can autonomously decide what is its current stage by using a learning metric. We have validated our algorithm using numerical simulation in a roto-magnet plant., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Modelling and estimation of vanadium redox flow batteries: a review

  • Puleston, Thomas Paul
  • Clemente León, Alejandro
  • Costa Castelló, Ramon
  • Serra, Maria
Redox flow batteries are one of the most promising technologies for large-scale energy storage, especially in applications based on renewable energies. In this context, considerable efforts have been made in the last few years to overcome the limitations and optimise the performance of this technology, aiming to make it commercially competitive. From the monitoring point of view, one of the biggest challenges is the estimation of the system internal states, such as the state of charge and the state of health, given the complexity of obtaining such information directly from experimental measures. Therefore, many proposals have been recently developed to get rid of such inconvenient measurements and, instead, utilise an algorithm that makes use of a mathematical model in order to rely only on easily measurable variables such as the system’s voltage and current. This review provides a comprehensive study of the different types of dynamic models available in the literature, together with an analysis of the existing model-based estimation strategies. Finally, a discussion about the remaining challenges and possible future research lines on this field is presented., The research that gave rise to these results received support from “la Caixa” Foundation (ID 100010434. Fellowship code LCF/BQ/DI21/11860023) , the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094, CSIC Interdisciplinary Thematic Platform (PTI+) Transición Energética Sostenible+ (PTI-TRANSENER+ project TRE2103000), the Spanish Ministry of Science and Innovation (project PID2021-126001OB-C31 funded by MCIN/AEI/10.13039/501100011033 / ERDF,EU) and the Spanish Ministry of Economy and Competitiveness under Project DOVELAR (ref. RTI2018-096001-B-C32)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Combined heat and power using high-temperature proton exchange membrane fuel cells for housing facilities

  • Sanz i López, Víctor
  • Lopez Diest, Guillermo
  • Costa Castelló, Ramon
  • Batlle Arnau, Carles
© 20xx IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Recently, new alternatives to conventional energy sources such as fossil fuels are arising due to global problems related to climate change effect and energy shortage. In this context, fuel cells and combined heat and power technologies appear as a possible solution due to their ability to provide both electrical and thermal energy more efficiently compared to traditional methods. Related to this, high-temperature proton exchange membrane fuel cells offer the possibility of implementing combined heat and power systems, and they are also considered an efficient technology that emits less greenhouse gases. In this article a model predictive control based energy management system for a specific house is presented. Simulation and control models of the system are presented, together with dimensions and energy profiles used. Finally, control objectives and the proposed control algorithm are detailed, and the results when trying to match residential heat and power demands are discussed., Peer Reviewed, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Temperaturecontrol for a proton-exchange membrane fuel cell system with unknown dynamic compensations

  • Xing, Yashan
  • Costa Castelló, Ramon
  • Na, Jing
Numerous control strategies of temperature regulation have been carried out for proton-exchange membrane fuel cell systems including a cooling fan in order to ensure operation at the desired condition and extend the lifetime of the fuel cell stack. However, most existing control strategies are developed without considering the efficiency limitation of the cooling system such that the cooling fan may be unable to eliminate the additional heat. Moreover, there are unknown modelling errors, external disturbance and noise during modelling and experiment processes for fuel cells. Due to those unknown dynamics, the conventional control strategies may fail to achieve the expectant results. To address this issue, an alternative control strategy is proposed in this paper, which consists of a composite proportional-integral (PI) controller with an unknown system dynamics estimator. First, the control strategy is developed by reducing the temperature of input air through the humidifier and simultaneously increasing the mass flow of air in order to eliminate the excess heat that a cooling fan cannot remove. Moreover, an unknown system dynamics estimator is proposed in order to compensate the effect of the unknown dynamics. The construction of the estimator is designed through finding an invariant manifold which implies the relation between known variables and the unknown manifold. The invariant manifold is derived by applying a simple low-pass filter to the system which is beneficial to avoid the requirement of the unmeasurable state derivative. Furthermore, the proposed estimator is easily merged into the proposed PI control strategy and ensures the exponential convergence of estimated errors. Besides, the estimator is further modified such that the derivative of the desired temperature is not required in the controller. Finally, numerical simulations of the PEMFC system are provided and the results illustrate the efficacy of the proposed control strategy., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Detection and mitigation of false data in cooperative dc microgrids with unknown constant power loads

  • Cecilia Piñol, Andreu
  • Sahoo, Subham
  • Dragicevic, Tomislav
  • Costa Castelló, Ramon
  • Blaabjerg, Frede
© 2021 IEEE. Personal use is permitted, but republication/redistribution requires IEEE permission. See https://www.ieee.org/publications/rights/index.html for more information., The rapid development and implementation of distributed control algorithms for DC microgrids has increased the vulnerability of this type of system to false data injection attacks, being one of the most prominent types of cyber attacks. This fact has motivated the development of different false data detection and impact mitigation strategies. A common approach for the detection is based on implementing an observer that can achieve a reliable estimation of the system states. However, approaches available in the literature assume that the underlying microgrid model is linear, which is generally not the case, specially when the DC microgrid supplies nonlinear constant power loads (CPLs). Consequently, this work proposes a distributed non-linear observer approach that can robustly detect and reconstruct the applied false data attack in the DC microgrid's current sensors and cyber-links, even in the presence of local unknown CPLs. First, the system is transformed into an observable form. Second, a high-order sliding-mode observer is implemented to estimate the system states and CPL, even in the presence of false data. Finally, the estimation is used to reconstruct the attack signal. The robustness of the proposed strategy is validated through numerical simulations and in an experimental prototype under measurement noise, uncertainty and communication delays., This work was supported in part by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656 and in part by the project DOVELAR under Grant RTI2018-096001-B-C32., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

On state-estimation in weakly-observable scenarios and implicitly regularized observers

  • Cecilia Piñol, Andreu
  • Costa Castelló, Ramon
© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting /republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works, This work proposes a framework to design observers for systems that present low observability. It is shown that, in these scenarios, the estimation problem becomes ill-posed, which drastically limits the performance of standard observers, specially in the presence of noise. Consequently, this paper presents a method to design an observer that optimizes some potential function to be defined by the designer. This allows to implicitly regularize the estimation and recover a well-posed problem. The proposed technique is validated in a set of weakly-observable systems and the performance is compared with a common Kalman filter-like observer., This work has been partially funded by the Spanish State Research Agency through the María de Maeztu Seal of Excellence to IRI (MDM-2016-0656) and by the project DOVELAR (ref. RTI2018-096001-B-C32)., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

State machine-based architecture to control system processes in a hybrid fuel cell electric vehicle

  • Molavi, Ali
  • Husar, Attila Peter
  • Hjortberg, Hampus
  • Nilsson, Niclas
  • Kogler, Markus
  • Monreal, Juan Sanchez
  • Eldigair, Yousif
  • Serra, Maria
© 2023 The Author(s). Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/)., This paper presents the development and implementation of a system supervisory controller in a hydrogen-based fuel cell electric vehicle. The controller's primary function is to ensure the safe control of the fuel cell system processes while facilitating coordination among various subsystems, including the balance of plant subsystems, vehicle control unit, diagnosis unit, and powertrain. The supervisory controller comprises of three primary parts: a State Machine, an Optimal Setpoint Generator, and a Power Limit Calculator. The State Machine, which serves as the central part of the supervisory controller, coordinates the fuel cell system's different operational states, including the complex processes of start-up and shutdown. To maximize the fuel cell system's efficiency and minimize the stack's degradation, the Optimal Setpoint Generator produces the subsystem's setpoints by solving an optimization problem and considering the manufacturer's requirements. The Power Limit Calculator assesses the stack's power output capability and calculates the current setpoint for the DC/DC converter. It then provides this data to the Energy Management System (EMS), which oversees the distribution of power between the fuel cell system and the batteries. The proposed fuel cell system supervisory controller is verified using the Worldwide Harmonized Light Vehicles Test Cycles (WLTC) in a real-world car. The designed control structure is implemented in a prototype hydrogen-based electric car at both PowerCell and CEVT facilities under the framework of the INN-BALANCE Horizon 2020 European project., This work was supported in part by the Spanish national project DOVELAR (RTI2018-096001-B-C32, MINECO/FEDER) also in part by the Fuel Cells and Hydrogen 2 Joint Undertaking under Grant INN-BALANCE 735969. This Joint Undertaking receives support from the European Union's Horizon 2020 research and innovation program and Hydrogen Europe and N. ERGHY, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An interactive teaching/learning approach to the design of robust linear control systems using the closed-loop shaping methodology

  • Dormido Bencomo, Sebastián
  • Díaz Martínez, José Manuel
  • Costa Castelló, Ramon
Usually the controller is designed working on the open-loop transfer function. However, it is also possible to design the controller working on the closed-loop transfer functions. The closed-loop shaping methodology offers a straightforward framework which allows designers and students to focus on the required specification fulfillment and dealing with inherent linear systems limitations without complex computations or using difficult algorithms. This article summarizes the basic ideas of the manual closed-loop shaping methodology, and its application to the design of robust controllers for uncertainty linear systems. An interactive software tool for learning/teaching this methodology is also presented., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Control super-twisting con adaptación basada en cruce por cero: análisis de estabilidad y validación

  • Anderson, Jorge
  • Moré, Jerónimo José
  • Puleston, Pablo Federico
  • Roda Serrat, Vicente
  • Costa Castelló, Ramon
En los últimos años, los algoritmos de control diseñados a partir de técnicas por Modos Deslizantes de Segundo Orden (MDSO) se han consolidado como una importante alternativa al modos deslizantes tradicional. Dentro de estos algoritmos, el control por MDSO Super-Twisting permite una importante reducción del chattering (oscilaciones de alta frecuencia), gracias a su acción de control continua, manteniendo las características de robustez y convergencia en tiempo finito deseadas. Sin embargo, en su implementación práctica, en ciertas ocasiones es necesario sobredimensionar las ganancias del controlador, con el objetivo de permitir el rechazo de grandes, aunque usualmente esporádicas, perturbaciones. Esto redunda inevitablemente en un incremento en el esfuerzo del controlador y, por ende, en un incremento del chattering del sistema. De esta manera, en este trabajo se presenta el análisis de estabilidad y validación de un mecanismo de Adaptación de Ganancias para un algoritmo de control por MDSO Super-Twisting. El mismo, continúa con el enfoque de adaptación basada en cruce por cero desarrollado por Pisano et al. para sistemas con grado relativo 2. El algoritmo propuesto es evaluado, en primera instancia. por simulación para el caso de aplicación de un sistema de potencia. Posteriormente, el sistema controlado es implementado y validado experimentalmente en una plataforma de 700W. Los resultados obtenidos mostraron una importante reducción del chattering y similares características de robustez, en comparación con el algoritmo Super-Twisting tradicional., Este trabajo fue realizado bajo el apoyo de la FI-UNLP, CONICET y Agencia I+D+i. El trabajo fue parcialmente financiado por el proyecto nacional de España DOVELAR ref. RTI2018-096001-B-C32 (MCIU/AEI/FEDER, UE), la Agencia Nacional de Investigación de España a través del Sello de Excelencia María de Maeztu al IRI (MDM-2016-0656) y la Asociación Universitaria Iberoamericana de Postgrado (AUIP)., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Parameter fitting of a reversible solid oxide stack model

  • Lleonsí Carrillo, Ignasi
  • Bernadet, Lucile
  • Torrell, Marc
  • Serra, Maria
Ponència presentada a la European Hydrogen Energy Conference, celebrada a Madrid (España), del 18 al 20 de maig de 2022, In this work, the fitting of five parameters of a Reversible Solid Oxide (RSO) stack model is done based on data obtained at different conditions of operation. Two types of experimental curves are used: polarization curves and sweeps. The system suffered a degradation and the analysis has permitted to study which one of the parameters was affected, indicating which part of the stack was damaged., Project funded partially by Ajuntament de Barcelona, in the framework of Pla Barcelona Ciència and partially by the Spanish State Research Agency through the project DOVELAR (ref. RTI2018-096001-B-C32), Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Observador de alta ganancia con zona muerta ajustable para estimar la saturación de agua líquida en pilas de combustible tipo PEM

  • Cecilia Piñol, Andreu
  • Costa Castelló, Ramon
In the area of PEM fuel cells, water management remains one of the most challenging issues affecting PEMFC efficiency and lifetime. Liquid water active control and supervision techniques are limited by the absence of online sensors that can estimate the liquid water saturation. For this reason, this work presents the design of a state observer to estimate the cathode catalyst layer’s liquid water saturation of an open-cathode PEM fuel cell. The proposed observer is based on High-Gain techniques, and is modified with a dynamic dead-zone which reduces the observer’s noise sensibility. The results have been validated through numerical simulation and experiments. It is shown that, in the absence of noise, the proposed observer presents a similar performance than its non dead-zone equivalent. Moreover, in the presence of noise, the dead-zone significantly reduces the estimation error induced by it., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

PEMFC state and parameter estimation through a high-gain based adaptive observer

  • Cecilia Piñol, Andreu
  • Serra, Maria
  • Costa Castelló, Ramon
This work presents the design of an adaptive observer to estimate the cathode catalytic layer's water content of a polymer electrolyte membrane fuel cell and some of the parameters related to its water dynamics. However, in general, existing adaptive observer algorithms require a certain relative degree condition which is not satisfied in the concerned fuel cell system. This conflict is solved by modifying the adaptive observer strategy with an auxiliary signal that does satisfy the relative degree condition. This signal is estimated through a high-gain observer. The viability of the presented observer is validated through numerical simulations., This work has been partially funded by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI (MDM-2016-0656), by the project DOVELAR (ref. RTI2018-096001-B-C32) and by AGAUR of Generalitat de Catalunya through theAdvanced Control Systems grant (SAC) (2017 SGR 482, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A model predictive control-based energy management scheme for hybrid storage system in islanded microgrids

  • Raveendran Nair, Unnikrishnan
  • Costa Castelló, Ramon
Model predictive control (MPC) facilitates online optimal resource scheduling in electrical networks, thermal systems, water networks, process industry to name a few. In electrical systems, the capability of MPC can be used not only to minimise operating costs but also to improve renewable energy utilisation and energy storage system degradation. This work assesses the application of MPC for energy management in an islanded microgrid with PV generation and hybrid storage system composed of battery, supercapacitor and regenerative fuel cell. The objective is to improve the utilisation of renewable generation, the operational efficiency of the microgrid and the reduction in rate of degradation of storage systems. The improvements in energy scheduling, achieved with MPC, are highlighted through comparison with a heuristic based method, like Fuzzy inference. Simulated behaviour of an islanded microgrid with the MPC and fuzzy based energy management schemes will be studied for the same. Apart from this, the study also carries out an analysis of the computational demand resulting from the use of MPC in the energy management stage. It is concluded that, compared to heuristic methods, MPC ensures improved performance in an islanded microgrid., This work was supported in part by the European Union’s Horizon 2020 Research and Innovation Program under the Marie Skłodowska Curie under Grant 675318 (INCITE), in part by the Spanish State Research Agency through the Maria de Maeztu Seal of Excellence to IRI under Grant MDM-2016-0656, and in part by the Spanish National Project DOVELAR (MCIU/AEI/FEDER, UE) under Grant RTI2018-096001-B-C32., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

H8 interactive controller design for teaching purposes

  • Díaz Martínez, José Manuel
  • Dormido Bencomo, Sebastián
  • Nicolau, Bernat
  • Costa Castelló, Ramon
H8-based controller design is one of the most powerful methodologies for controller design in the frequency domain. Unfortunately, its use requires advanced knowledge of control theory. The use of interactive tools allows to a non-specialized user to use these techniques and to learn the fundamental concepts behind the H8 theory. In this work a graphical and completely interactive tool used to introduce students in H8 control is presented., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Herramientas para la docencia de control digital en grados de ingeniería, Tools for teaching digital control in engineering degrees

  • Lerma Macaya, Eneko
  • Costa Castelló, Ramon
  • Griñó Cubero, Robert
  • Sanchis, Carlos
En este trabajo se describen un conjunto de materiales pedagógicos que han sido desarrollados para dar soporte a la docencia del control digital. En particular, se presentan un conjunto de herramientas interactivas y el proyecto Duino-Based Learning (DBL) pensado para desarrollar prácticas experimentales de control digital utilizando Arduino. Además, se describe el contenido de un curso de control digital, que  se imparte en el marco de una titulación de ingeniería industrial, y como se utilizan las diferentes herramientas desarrolladas en su docencia., Peer Reviewed, Postprint (published version)